Meeting 11 – 2/19/16
Meeting 11 – 2/19/16
Week by Week Semester Schedule
Chapter 1 & 2: Blinking and LEDs with Arduino
Questions, Problems, Difficulties you encountered?
TroubleshootingTips:• Follow Red/Black, Positive/Negative
conventions• If something isn't going in, put in the
jumper cable a few time to make it smoother
When things aren't working:• Check where current and ground are
connect to• Check orientation of LED• Check everything is plugged in correctly
according to diagram• Check everything is plugged in all the way
Anything else we can add?
Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation
Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation
1.Turning on an LED—led.ino2.LED with Changing Blink Rate—blink.ino3.LED Fade Sketch—fade.ino4.Simple LED Control with a Button—led_button.ino5.Debounced Button Toggling—debounce.ino6.Toggling LED Nightlight—rgb_nightlight.ino
Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation
Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation
Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation
LED button
Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation
Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation
Chapter 3: Reading Analog Sensors www.exploringarduino.com/content/ch3 .
Chapter 3: Reading Analog Sensors
1. Potentiometer Reading Sketch—pot.ino
2. Temperature Alert Sketch—tempalert.ino
3. Automatic Nightlight Sketch—nightlight.ino
Chapter 3: Reading Analog SensorsParts You'll Need
Questions?
For next week:• Read Chapter 3: Digital Inputs, Outputs, and Pulse-Width
Modulation
• Complete all six Ch 2 projects
• *Additional: Watch the video tutorials - https://www.youtube.com/watch?v=_LCCGFSMOr4&list=PLA567CE235D39FA84&index=2
See you next week!