bambach tensio-technik GbR bambach GbR • Peter-Spring-Str. 18 • 65366 Geisenheim • Germany Gesellschafter: Edith Bambach, Daniela Bambach • Tel: +49(0)6722-972168 • Fax: +49(0)6722-75157 • [email protected] • USt-Id Nr.: DE 815129733 Steuer-Nr.: 037 303 30035 • Nassauische Sparkasse • BLZ 51050015 • Kto-Nr.: 450038024 • BIC: NASS DE55 • IBAN: DE89510500150450038024 Filiale: bambach GbR • Karlsbader Str. 28 • 74211 Leingarten • Telefon: +49(0)7131-6421200 • Fax: +49(0)7131-740981 • [email protected]www.tensio.de ® Operating System T-Bus with RS 485-connection Voltage 5-12 VDC Power needs At rest <50 µA, max. load about 800 mA pro port Power source External battery box with 4x 1.5 V mono (D), Optional external mains plug 5 V DC, Optional solar panel and rechargeable battery, Optional internal battery pack in the lid Input sockets 4 separately switchable sensor ports Connections 1 socket for external power supply 2 sockets for sensors, optional 4 sockets PC-Connection Adaptor cable RS485 > USB (plug on board) Programming PC-configuration with command table Housing Plastic (PC) 100x200x70 mm; Seal- IP 66 Sensors Sensors with cable connection Digital Volume sensor SMT 100 (T-Bus/ RS485) Analogue Various voltage sensors for tensiometers etc. Number Up to 100 measurement commands (software) Connections External boxes with plug connection, optional direct connection for up to 4 (8) sensors Power supply ≙ logger voltage (for regulated sensors) Model TRL Powerful, uncomplicated, economical and cost-effective, compact and suitable for outdoor use Bus-operating mode Battery operation External sensor boxes Simple software Also for analogue sensors 1 New TensioLogger
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Operating System T-Bus with RS 485-connectionVoltage 5-12 VDC
Power needs At rest <50 µA, max. load about 800 mA pro port
Power source External battery box with 4x 1.5 V mono (D), Optional external mains plug 5 V DC,Optional solar panel and rechargeable battery,Optional internal battery pack in the lid
Input sockets 4 separately switchable sensor portsConnections 1 socket for external power supply
2 sockets for sensors, optional 4 socketsPC-Connection Adaptor cable RS485 > USB (plug on board)Programming PC-configuration with command table
Measuring, Recording Secure Flash-MemoryValue, range Signals: 0-10 V or sensor read-out values, re-
cords original values 1:1Frequency Every minute for 7 days, also seconds stepsResolution 1 mV for 10 V
Memory capacity 16 MB (≙ about 1 million individual data)Data read-out PC-Software on location (opt. detach logger)
Data format txt, csv, separators choosable as desired, direct export to Excel possible
Data Transfer Optional GSM Feature
Hardware Modem + SIM-Card for GPRS-Service,mini-external antenna (connecting socket)
Transfer Per ftp to any server desiredTransfer interval Every minute, after 60 minRetransmission Back-up over 10 KB memory buffer
Connection boxes External sensor connections
Digital Spring clamps (rail mounting),for 10 T-Bus sensors, Housing 130x130x75 mm, logger cable with plug, length- 5 m
Analogue Defined electronic connections with 8 switchab-le sockets for max. 16 sensors, power according to logger voltage, additional constant voltage for unregulated sensors 3.3 V or 4 V, sensor connection with insertable screw clamps,housing 180x110x65 mm, logger cable with plug, length- 5 m