gb_hfm_brochure_lr

REMOVE MORE METAL. MAKE MORE PARTS. MAXIMIZE YOUR BUSINESS.

HIGH FEED MILLING

2

3

THREE TIMES FASTER MILLING UNLOCKS GOLDEN OPPORTUNITIES

Times change. Increasingly effi cient competition demands increas-ingly effi cient machining methods. High Feed Milling is the key to keeping your company in front. It’s a milling method that permits up to three times faster machining than conventional methods. Instead of cutting with greater depth — and shortening tool life — it does the opposite. It pairs shallow depth of cut with high feed per tooth, sparing the tools. Which gives higher metal removal rate than normal. It’s a method with generous advantages. For example, the cutting forces are directed at the machine spindle in the axial direction. Reducing vibrations and in turn extending tool life. Leading to a better return on investment. But that’s not all! Machining with a small cutting depth and fast feed per tooth you can remove over 1,000 cubic centimetres per minute. As a matter of fact, sometimes you can increase feed rates up to ten times the normal rate. And even though it s a roughing method, near net shapes are achievable. Which allows you to skip semi-fi nishing and go directly to the fi nal fi nishing operation. Which gives you the freedom to produce more components per machine. Giving you a better foothold for competing with other companies. High Feed Milling opens doors to more lucrative business.

4

If you’re already in the market for High Feed Milling, you’ll be even more convinced by the next few pages. Let’s begin at the point where metal meets metal: with the inserts. They’re thick and have a big radius and strong geometry at the cutting zone. This means you can work at high speed and still have reliable and safe machining. On the other hand, the cutting depth is small – maximum 2.0 mm. But because of this, you can increase cutting speed considerably. Reducing the machining time for every component. As a natural outcome, production effectiveness jumps!

FEWER VIBRATIONS, MORE STABLE CUTTINGThe HFM method takes advantage of small setting angles. This gives minimal radial- and maximal axial cutting forces. Which reduces the risk for vibrations and stabilises machining. In turn, this allows raised parameters for

cutting even when machining with a large overhang. Gains from High Feed Milling are more than just higher productivity. Tool life is prolonged. This cuts tool costs. The comprehensive HFM programme suits all kinds of applications. Which gives you great fl exibility. Many of the cutter bodies are coated with hardy nickel chrome alloy prolonging both body and insert life. High Feed Milling has a lot going for it. And there’s more.

MORE ATTRACTIVE PRODUCTIVITY GOALS

Cutting force direction with 218.19 type of inserts

5

HIGH FEED CUTTERS3 TIMES AS FAST WHEN USING LONG OVERHANG

• Cutting edges designed with very big radii• Small depth of cut but high feed rates without vibration• Cutting forces always in axial direction

LONG OVERHANG, FASTER MACHINING, SAFER CHOICE OF INSERTSHigh Feed Milling and long overhang co-operate in perfect harmony. Using long overhang with high feed cutters, you can machine three times faster. This implies that your choice is trigon style inserts and cutting edges designed with very big radii. So the small depth of cut and high feed rates without vibration come naturally. And so do the cutting forces, always in an axial direction. Actually, for most High Feed Milling operations trigon style inserts are preferred over round. The reason is that the main cutting forces are located at the bottom of the cutting edge. Of course, there are situations when you use square inserts – in such cases with a small setting angle. And mostly in High Feed heavy roughing applications using powerful machines in stable conditions or in horizontal milling operations, making chip evacuation more effective. But in vertical operations trigon style inserts are a safe choice, offering excellent chip evacuation. Also when it comes to smaller machines with high rpm.

6

ROUGHING...SEMI-FINISHING...FINISHING. Not only is machining time shortened for every piece, but the minimal radial forces also reduce wear on the spindle at the same time as cutting forces are absorbed by the tool — qualities that cut downtime because of reduced main-tenance needs. Another HFM time-saver is the number of operations. Since high feed roughing with its small depths of cut

generates a shape close to the fi nal requested form, semi-fi nishing operations can often be eliminated. The NC programming is thus simplifi ed. On top of this, the HFM process doesn’t demand increased rotational speed from the machine.

7

GREATER RELIABILITY, BETTER UTILISATION, SMALLER TOOL INVENTORIES.With insert grades that can machine diffi cult materials, the predictability of the tools also increases. The result: fewer tool changes, less rejects, less reworking. In addition, every insert has a robust geometry. A quality that delivers two things: longer machining time before you have to index the insert and a more

comprehensive application area for every tool. In other words, you’re making better use of your tools. This reduces the tool inven-tory and consequently, costs. Its stable geometry also saves time. Fewer tool changes, fewer settings and less machine downtime. The time gained means maximal machining time on every machine, higher output and greater fl exibility with applications. Speaking of applications, there’s a broad range of holder lengths and insert diameters, with the huge advantage of making optimal use of your tools in every application.

8

HIGH FEED SOLUTIONS FOR ALL YOUR APPLICATIONS

FACE MILLING SOLUTIONSFace milling with the HFM method is perfect for creating a good platform for further machining operations or a fi nal fi nishing. In most HFM applications, you’ll often get such fi ne tolerances that only fi nal fi nishing is needed. Since the work involves large blocks, tools with large diameters are most often used. That is, trigon style inserts in cutters with cassette bodies. High Feed face milling is relevant for most soft materials like aluminium, iron and steel. However, the method is rarely used for hard alloys or other diffi cult-to-machine materials. The trick is to choose the right insert grade and geometry for each material, while the choice of cutter body is more obvious. The fi rst choice for face milling should be the cassette version of the R220.21-C with 218.19-160 inserts (Ø88 mm – 208 mm).

COPY MILLING SOLUTIONS Copy milling using the HFM method is also very practical for machining uneven surfaces. At the end of this brochure are recommendations for tool choices and other parameters – all depending on what is to be machined, the size of the component to be produced and the level of rigidity. Here, the choice is between Jabro Solid End Mill, Minimaster and R217/220.21 with 218.19 or SCET120630T inserts. CAVITY MILLING SOLUTIONSThe HFM method is highly effective in cavity milling and especially effective in mould and die. Just as in copy milling, the application indicates the necessary tool diameter. So the choice of tool becomes almost evident, although certain variables apply. Here, too, choice is based on the size of the workpiece and the need for rigidity. The choice is between Jabro Solid End Mill, Minimaster and R217/220.21 with 218.19 or SCET120630T inserts.

9

10

11

HELICAL INTERPOLATION SOLUTIONSIn helical interpolation, the HFM method is a very suitable solution for making large-diameter holes — you can skip pre-machining or pre-drilling. The high feed cutter has minimal contact with the component’s wall section. The advantage is more stable machining than with conventional milling cutters that have a 90-degree setting angle.

MILLING WITH PCBNCBN200 is an exceptional milling grade. Its unique combination of toughness, wear resistance, edge quality, fi ne grain size and unique metal binder translates into a grade which can perform both roughing and fi nishing of hardened steel / irons, powdered / sintered irons and grey cast irons.

Use the same cutting parameters as those used for ramping and • helical interpolation operations.Higher cutting speeds compared to carbide inserts• The best result is obtained with conventional milling, whereas • with carbide cutters and inserts we recommend climb milling as the fi rst choice.Do not use coolant during milling operations.•

PLUNGING SOLUTIONSHFM tools are also excellent for plunging operations. They’re especially appropriate for diffi cult materials like titanium and other light alloys. High Feed Milling is equally suitable for applications with long over-hangs. The risk for vibrations drops. Which extends tool life, but notice that square inserts should be avoided for overhangs larger than 3 x D. Normal feed rates are used together with larger cutting depths. Suitable tools are Jabro Solid End Mill, Minimaster and R217/220.21 with 218.19 or SCET120630T inserts.

12

EVERYTHING YOU NEED

Some brief facts about every High Feed Milling tool. Their shared feature is the savings in time. You avoid semi fi nishing. You reduce tool changes. More time means more components. You’re freeing up resources.

MINIMASTERIn the area Ø8 - 12 mm, Jabro solid • end mills have better rigidity and should be chosen when there are applications with a lower depth of cut.Minimaster offers fl exibility, for each • diameter there are different shank versions which will give you optimal tool length for the application.

Ø8 – 16 MM

JABRO SOLID END MILLSA tool range perfect for small workpieces and small cavities.

JHF980 for machining steel, stainless • steel, cast iron and superalloys.JHF180 for machining hardened steel.•

Ø1 – 16 MM

13

R217/220.21Fixed pocket range, including shanks • and shell end mill bodies.Suitable for face milling, pocketing, • helical interpolation and plunging applications. R220.21 – shell end mill bodies• R217.21 – various shank types• 218.19 inserts – includes 4 different • sizes to cover the 16 - 208 mm di-ameters. A wide selection of cutting geometries and grades for all kinds of materials.SCET120630T inserts – 6.35 mm • thick insert type with a corner radius of 3.0 mm. Mainly for heavy roughing applications where the conditions are stable. Suitable for milling operations when the tool operates horizontally against the workpiece.

Ø16 – 160 MM

R220.21-CIndexable insert range with cassette bodies, developed specifi cally for face milling applications.

Ø88 – 208 MM

R217.21 WITH PCBN INSERTSMilling with PCBN inserts allow hard-ened steel machining from 45 – 65HRc with higher cutting data compared to carbide machining, which leads to increased productivity.

Ø20 – 25 MM

14

JHF180 APPLICATION TEST VERSUS TWO MAIN COMPETITORS

PARAMETERSMachine MakinoA55e

Coolant Dry

Holder HSK63A

Operation ID turning interrupted cutting

vc 100 m/min

RPM 3200

fz 0.3 mm/tooth

vf 3800 mm/min

ap 0.254 mm

ae 8.0 mm

Time/pocket 8 min

Parameters chosen as an average between all available parameters(competitiors 1 and 2 and Jabro)

APPLICATIONProducing a shallow pocket in 1.2344 53-55HRC SMG7a

FIELD REPORTS

Tool still in good condition

Number of pockets

Comp 1 Comp 2 JHF180

HARDENED STEEL MACHINING 54HRC MINIMASTER

Hardened steel machining 54HRc

Material 42CrMo4 (Group 7)

Shank MM12-20095.3-3027

Insert MM12-12.60-HF-MD10 F30M

Cutting data

vc 150 m/min

n 4000 rpm

fz 0.5 mm/tooth

vf 4000 mm/min

ap 0.3 mm

ae 9 mm

10 min

MM-B90 MM-HF

Tim

e/pa

rt

Roughing /cavity

4 min

15

CBN MACHINING / HIGH FEEDR217/220.21 – 218.19 INSERTS

CBN machining

Material 1.2344 (SMG7)

Hardness 57 HRc

Cutter R217.21-1225.RE-R100.3A

Insert 218.19-100T-MD08-LF, CBN200

Cutting data

vc 1200 m/min

fz 0.6 mm/tooth

vf 23000 mm/min

ap 0.15 mm

ae 18 mm

370 cm3/min

CBN Carbide

cm3/min

75 cm3/min

INCONEL MACHINING / HIGH FEEDR217/220.21 – 218.19 INSERTS

Operation Roughing

Material 17-4 PH (SMG11)

Cutter R217.21-1225.RE-R100.3A

Insert 218.19-100T M06, F30M

Cutting data

vc 235 m/min

fz 1.0 mm/tooth

vf 9000 mm/min

ap 0.7 mm

ae 18 mm

Machining time/slot 9 minutes

Application Machining slots by using ramping method

Competitor Seco

Tim

e

HIGH FEEDR220.21 – SCET12 INSERTS

Long tool length 180 mm

Material X38CrMoV5.3 (SMG6)

Cutter R220.21-0063-SC12.4A

Insert SCET120630T-M14, F40M

Cutting data

vc 267 m/min

fz 1.5 mm/tooth

vf 8000 mm/min

ap 1.5 mm

ae 40 mm

Tool life 138 min

Too

l lif

e (m

inut

es)

Competitor Seco

16

Dc dmm l2 zn

180020R050Z4-4-MEGA-64

180L020R050TNZ4-4-MEGA-64

180TL020R050TNZ3-4-MEGA64

180020R050Z4-6-MEGA-64

180ML020R050Z4-MEGA-64

180L020R050TNZ4-6-MEGA-64

180TL020R050TNZ3-6-MEGA64

180030R075Z4-MEGA-64

180ML030R075Z4-MEGA-64

180L030R075TNZ4-MEGA-64

180TL030R075TNZ3-MEGA-64

180040R100Z4-MEGA-64

180ML040R100Z4-MEGA-64

180L040R100TNZ4-MEGA-64


180060R150Z4-MEGA-64

180ML060R150Z4-MEGA-64

180L060R150TNZ4-MEGA-64


180070R150Z4-MEGA-64

180080R200Z4-MEGA-64

180ML080R200Z4-MEGA-64

180L080R200TNZ4-MEGA-64


180090R200Z4-MEGA-64

180100R200Z4-MEGA-64

180100R200Z5-MEGA-64

180ML100R200Z4-MEGA-64

180L100R200TNZ4-MEGA-64


180110R200Z4-MEGA-64

180120R300Z4-MEGA-64

180120R300Z5-MEGA-64

180ML120R300Z4-MEGA-64

180L120R300TNZ4-MEGA-64


180130R300Z4-MEGA-64

180160R300Z4-MEGA-64

180160R300Z5-MEGA-64

180ML160R300Z4-MEGA-64

180L160R300TNZ4-MEGA-64

JHF180-MEGA-64C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

B

B

C

C

A

B

B

C

C

A

B

B

B

C

C

A

B

B

B

C

C

A

B

B

B

C

1

1

1

1

1

1

1

1,5

1,5

1,5

1,5

2

2

2

2

3

3

3

3

4

4

4

4

4

5

6

6

6

6

6

7

6

6

6

6

6

7

10

10

10

10

4

4

4

6

6

6

6

6

6

6

6

6

6

6

6

6

6

8

8

6

8

8

10

10

8

10

10

10

12

12

10

12

12

12

16

16

12

16

16

16

20

40

40

40

50

50

50

50

50

50

50

60

50

50

60

65

50

65

65

80

65

55

70

85

100

70

65

65

85

100

125

85

75

75

100

100

125

100

80

80

125

130

4

4

3

4

4

4

3

4

4

4

3

4

4

4

3

4

4

4

3

4

4

4

4

3

4

4

5

4

4

3

4

4

5

4

4

3

4

4

5

4

4

l3

4

10

14

4

8

10

14

6

12

15

21

8

16

20

28

12

24

30

42

–

16

32

40

56

–

20

20

40

50

70

–

24

24

48

60

84

–

32

32

64

80

�

0,1

0,1

0,1

0,1

0,1

0,1

0,1

0,15

0,15

0,15

0,15

0,2

0,2

0,2

0,2

0,3

0,3

0,3

0,3

0,35

0,35

0,35

0,35

0,35

0,4

0,4

0,4

0,4

0,4

0,4

0,5

0,5

0,5

0,5

0,5

0,5

0,6

0,6

0,6

0,6

0,6

r�1

0,5

0,5

0,5

0,5

0,5

0,5

0,5

0,75

0,75

0,75

0,75

1

1

1

1

1,5

1,5

1,5

1,5

1,5

2

2

2

2

2

2

2

2

2

2

2

3

3

3

3

3

3

3

3

3

3

0,5

0,5

0,5

0,5

0,5

0,5

0,5

0,75

0,75

0,75

0,75

1

1

1

1

1,5

1,5

1,5

1,5

1,5

2

2

2

2

2

2

2

2

2

2

2

3

3

3

3

3

3

3

3

3

3

�

9˚

5˚

4˚

15˚

10˚

8,5˚

7˚

10˚

6˚

5˚

4˚

6˚

3,5˚

3˚

2˚

–

–

2˚

1,5˚

–

–

–

1,5˚

1,5˚

–

–

–

–

1,5˚

1˚

–

–

–

–

2˚

1,5˚

–

–

–

–

1,5˚

apDc2

2

2

2

2

2

2

2

3

3

3

3

4

4

4

4

6

6

6

6

7

8

8

8

8

9

10

10

10

10

10

11

12

12

12

12

12

13

16

16

16

16

r�2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

3

3

3

3

3

3

4

4

4

4

4

�

–

0,9

0,9

–

–

0,9

0,9

–

–

0,9

0,9

–

–

0,9

0,9

–

–

0,9

0,9

–

–

–

0,9

0,9

–

–

–

–

0,9

0,9

–

–

–

–

0,9

0,9

–

–

–

–

0,9

JHF180 A / B / C

Dimensions in mm

Type Part No. Dra

win

g A

/B/C

JHF180 HFM

JHF180 Solid carbide high feed end mill

Tolerances:• Run-out = 0,01 mm• dmm = h5• Dc = –0,02/–0,04 mm• r�1 = +/-0,01 mm

rp = programming radius * Uncut thickness

Picture key symbols see pages 14-15 in Machining Navigator 2008

17

JHF180 HFM cutting data

* = when zn= 4, vf value +33%** = when zn= 5, vf value +25%

Prefered coolant: Mist sprayCutting data are target values.

JHF180standard

Slot milling roughing Dc2 (mm)

aex Dc2

vc(m/min)

2 3 4 6 7 8 9 10 11 12 13 16

Material zn = 3 zn = 4

7a >48-56 HRc 1 135

n (min-1) 21486 14324 10743 7162 5371 6139 4775 4297 3907 3581 3306 2686

fz (mm) 0,05 0,075 0,1 0,15 0,2 0,175 0,225 0,25 0,275 0,3 0,325 0,4

vf (mm/min) 3223* 3223* 3223* 3223* 3223* 4297 4297 4297** 4297 4297** 4297 4297**

ap max 0,15 0,2 0,25 0,35 0,45 0,4 0,5 0,5 0,5 0,55 0,55 0,55

7b >56-62 HRc 1 70

n (min-1) 11141 7427 5570 3714 2785 3183 2476 2228 2026 1857 1714 1393

fz (mm) 0,04 0,06 0,08 0,12 0,16 0,14 0,18 0,2 0,22 0,24 0,26 0,32

vf (mm/min) 1337* 1337* 1337* 1337* 1337* 1783 1783 1783* 1783 1783* 1783 2228*

ap max 0,075 0,1 0,125 0,175 0,225 0,2 0,25 0,25 0,25 0,275 0,275 0,275

JHF180TL


aex Dc2

vc(m/min)

2 3 4 6 7 8 9 10 11 12 13 16

Material zn = 4

7a >48-56 HRc 1 135

n (min-1) 21486 14324 10743 7162 – 5371 – 4297 – 3581 – –

fz (mm) 0,025 0,038 0,050 0,075 – 0,100 – 0,125 – 0,150 – –

vf (mm/min) 1611 1611 1611 1611 – 1611 – 2149 – 2149 – –

ap max 0,06 0,08 0,1 0,14 – 0,18 – 0,2 – 0,22 – –

7b >56-62 HRc 1 70

n (min-1) 11141 7427 5570 3714 – 2785 – 2228 – 1857 – –

fz (mm) 0,02 0,03 0,04 0,06 – 0,08 – 0,1 – 0,12 – –

vf (mm/min) 668 668 668 668 – 668 – 891 – 891 – –

ap max 0,03 0,04 0,05 0,07 – 0,09 – 0,1 – 0,11 – –

JHF180L


aex Dc2

vc(m/min)

2 3 4 6 7 8 9 10 11 12 13 16

Material zn = 4

7a >48-56 HRc 1 135

n (min-1) 21486 14324 10743 7162 – 5371 – 4297 – 3581 – 2686

fz (mm) 0,035 0,053 0,070 0,105 – 0,140 – 0,175 – 0,210 – 0,280

vf (mm/min) 3008 3008 3008 3008 – 3008 – 3008 – 3008 – 3008

ap max 0,09 0,12 0,15 0,21 – 0,27 – 0,3 – 0,33 – 0,33

7b >56-62 HRc 1 70

n (min-1) 11141 7427 5570 3714 – 2785 – 2228 – 1857 – 1393

fz (mm) 0,028 0,042 0,056 0,084 – 0,112 – 0,14 – 0,168 – 0,224

vf (mm/min) 1248 1248 1248 1248 – 1248 – 1248 – 1248 – 1248

ap max 0,05 0,07 0,09 0,12 – 0,16 – 0,18 – 0,19 – 0,19

JHF180ML


aex Dc2

vc(m/min)

2 3 4 6 7 8 9 10 11 12 13 16

Material zn = 4

7a >48-56 HRc 1 135

n (min-1) 21486 14324 10743 7162 – 5371 – 4297 – 3581 – 2686

fz (mm) 0,043 0,064 0,085 0,128 – 0,170 – 0,213 – 0,255 – 0,340

vf (mm/min) 3653 3653 3653 3653 – 3653 – 3653 – 3653 – 3653

ap max 0,12 0,16 0,2 0,28 – 0,36 – 0,4 – 0,44 – 0,44

7b >56-62 HRc 1 70

n (min-1) 11141 7427 5570 3714 – 2785 – 2228 – 1857 – 1393

fz (mm) 0,034 0,051 0,068 0,102 – 0,136 – 0,17 – 0,204 – 0,272

vf (mm/min) 1515 1515 1515 1515 – 1515 – 1515 – 1515 – 1515

ap max 0,06 0,08 0,1 0,14 – 0,18 – 0,2 – 0,22 – 0,22

18


* = when zn= 4, vf value +33%** = when zn= 5, vf value +25%

Prefered coolant: Mist sprayCutting data are target values.

JHF180standard


aex Dc2

vc(m/min)

2 3 4 6 7 8 9 10 11 12 13 16

Material zn = 3 zn = 4

7a >48-56 HRc 0,5 145

n (min-1) 23077 11539 11539 7692 5769 6594 5128 4615 4196 3846 3550 2885

fz (mm) 0,08 0,16 0,16 0,24 0,32 0,28 0,36 0,4 0,44 0,48 0,52 0,64

vf (mm/min) 5539* 5539* 5539* 5539* 5539* 4297 7385 7385** 7385 7385** 7385 7385**

ap max 0,15 0,25 0,25 0,35 0,45 0,4 0,5 0,5 0,5 0,55 0,55 0,55

7b >56-62 HRc 0,5 80

n (min-1) 12732 6366 6366 4244 3183 3638 2829 2546 2315 2122 1959 1592

fz (mm) 0,06 0,12 0,12 0,18 0,24 0,21 0,27 0,3 0,33 0,36 0,39 0,48

vf (mm/min) 2292* 2292* 2292* 2292* 2292* 3056 3056 3056* 3056 3056* 3056 3056*

ap max 0,075 0,125 0,125 0,175 0,225 0,2 0,25 0,25 0,25 0,275 0,275 0,275

JHF180TL


aex Dc2

vc(m/min)

2 3 4 6 7 8 9 10 11 12 13 16

Material zn = 4

7a >48-56 HRc 0,5 145

n (min-1) 23077 15385 11539 7692 – 5769 – 4615 – 3846 – –

fz (mm) 0,04 0,06 0,08 0,12 – 0,16 – 0,2 – 0,24 – –

vf (mm/min) 2769 2769 2769 2769 – 2769 – 3692 – 3692 – –

ap max 0,06 0,08 0,1 0,14 – 0,18 – 0,2 – 0,22 – –

7b >56-62 HRc 0,5 80

n (min-1) 12732 8488 6366 2444 – 3183 – 2546 – 2122 – –

fz (mm) 0,03 0,045 0,06 0,09 – 0,12 – 0,15 – 0,18 – –

vf (mm/min) 1146 1146 1146 1146 – 1146 – 1528 – 1528 – –

ap max 0,03 0,04 0,05 0,07 – 0,09 – 0,1 – 0,11 – –

JHF180L


aex Dc2

vc(m/min)

2 3 4 6 7 8 9 10 11 12 13 16

Material zn = 4

7a >48-56 HRc 0,5 145

n (min-1) 23077 15385 11539 7192 – 5769 – 4615 – 3846 – 2885

fz (mm) 0,056 0,084 0,112 0,168 – 0,224 – 0,28 – 0,336 – 0,448

vf (mm/min) 5169 5169 5169 5169 – 5169 – 5169 – 5169 – 5169

ap max 0,09 0,12 0,15 0,21 – 0,27 – 0,3 – 0,33 – 0,33

7b >56-62 HRc 0,5 80

n (min-1) 12732 8488 6366 4244 – 3183 – 2546 – 2122 – 1592

fz (mm) 0,042 0,063 0,084 0,126 – 0,168 – 0,21 – 0,252 – 0,336

vf (mm/min) 2139 2139 2139 2139 – 2139 – 2139 – 2139 – 2139

ap max 0,045 0,06 0,075 0,105 – 0,135 – 0,15 – 0,165 – 0,165

JHF180ML


aex Dc2

vc(m/min)

2 3 4 6 7 8 9 10 11 12 13 16

Material zn = 4

7a >48-56 HRc 0,5 145

n (min-1) 23077 15385 11539 7692 – 5769 – 4615 – 3846 – 2885

fz (mm) 0,068 0,102 0,136 0,204 – 0,272 – 0,34 – 0,408 – 0,544

vf (mm/min) 6277 6277 6277 6277 – 6277 – 6277 – 6277 – 6277

ap max 0,12 0,16 0,2 0,28 – 0,36 – 0,4 – 0,44 – 0,44

7b >56-62 HRc 0,5 80

n (min-1) 12732 8488 6366 4244 – 3183 – 2546 – 2122 – 1592

fz (mm) 0,051 0,0765 0,102 0,153 – 0,204 – 0,255 – 0,306 – 0,408

vf (mm/min) 2597 2597 2597 2597 – 2597 – 2597 – 2597 – 2597

ap max 0,06 0,08 0,1 0,14 – 0,18 – 0,2 – 0,22 – 0,22

19


Slot milling Roughing

Seco Material Group ***coolantvc

m/min**fz

mm/tooth **ap ae

Hardened Steel >48-56 HRc 7a M 120 - 150 0,025xDc2 1 x ap Dc2

Hardened Steel >56-62 HRc 7b M 60 - 80 0,02xDc2 0,5 x ap Dc2

** Reduce ap - 20% and Feed per tooth with - 15% at ML version ** Reduce ap - 40% and Feed per tooth with - 30% at L version

Side millingRoughing


m/min**fz

mm/tooth**ap max. ae

Hardened Steel >48-56 HRc 7a M 130 - 160 0,040xDc2 1 x ap 0,5xDc2

Hardened Steel >56-62 HRc 7b M 70 - 90 0,030xDc2 0,5 x ap 0,5xDc2

** Reduce ap - 20% and Feed per tooth with - 15% at ML version ** Reduce ap - 40% and Feed per tooth with - 30% at L version*** E = Emulsion M = Mist spray A = Air

ap table

Dc2 ap

2 0,15

3 0,20

4 0,25

6 0,35

7 0,40

8 0,45

9 0,50

10 0,50

11 0,50

12 0,55

13 0,55

16 0,55

Ramping angle: 1–1,5 degrees.

20

Dc dmm l2 zn

980010-MEGA

980ML010-MEGA

980TL010-MEGA

980015-MEGA

980ML015-MEGA

980TL015-MEGA

980020-MEGA

980ML020-MEGA

980TL020-MEGA

980030-MEGA

980ML030-MEGA

980TL030-MEGA

980040-MEGA

980ML040-MEGA

980TL040-MEGA

980050-MEGA

980ML050-MEGA

980TL050-MEGA

980060-MEGA

980ML060-MEGA

980TL060-MEGA

980K080Z3-MEGA

980080-MEGA

980ML080-MEGA

980TL080-MEGA

980K100Z3-MEGA

980100-MEGA

980100Z3-MEGA

980ML100-MEGA

980TL100-MEGA

980K120Z3-MEGA

980120-MEGA

980120Z3-MEGA

980ML120-MEGA

980TL120-MEGA

JHF980-MEGAA

A

C

A

A

C

A

A

C

A

A

C

A

A

C

A

A

C

A

A

C

B

B

B

D

B

B

B

B

D

B

B

B

B

D

0,5

0,5

0,5

0,75

0,75

0,75

1

1

1

1,5

1,5

1,5

2

2

2

2,5

2,5

2,5

3

3

3

4

4

4

4

5

5

5

5

5

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

8

8

8

8

8

8

8

10

10

10

10

10

12

12

12

12

12

40

40

40

40

40

40

40

40

50

50

50

60

60

70

80

60

80

90

60

80

100

70

70

80

100

80

80

80

90

110

80

80

80

110

130

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

3

2

2

2

3

2

3

2

2

3

2

3

2

2

l3

3

5

7

4,5

7,5

10,5

6

10

14

9

15

21

12

20

28

15

25

35

18

30

42

12

24

40

56

15

30

30

50

70

18

36

36

60

84

�

0,07

0,07

0,07

0,1

0,1

0,1

0,15

0,15

0,15

0,2

0,2

0,2

0,25

0,25

0,25

0,3

0,3

0,3

0,4

0,4

0,4

0,4

0,5

0,5

0,5

0,6

0,6

0,6

0,6

0,6

0,7

0,7

0,7

0,7

0,7

r�1

0,07

0,07

0,07

0,1

0,1

0,1

0,15

0,15

0,15

0,2

0,2

0,2

0,3

0,3

0,3

0,4

0,4

0,4

0,5

0,5

0,5

0,5

0,6

0,6

0,6

0,8

0,8

0,8

0,8

0,8

1

1

1

1

1

0,127

0,127

0,127

0,183

0,183

0,183

0,269

0,269

0,269

0,366

0,366

0,366

0,503

0,503

0,503

0,641

0,641

0,641

0,778

0,778

0,778

0,935

0,935

0,935

0,935

0,176

1,176

1,176

1,176

1,176

1,418

1,417

1,417

1,417

1,417

0,028

0,028

0,028

0,032

0,032

0,032

0,04

0,04

0,04

0,059

0,059

0,059

0,078

0,078

0,078

0,096

0,096

0,096

0,118

0,118

0,118

0,198

0,156

0,156

0,156

0,232

0,192

0,192

0,192

0,192

0,266

0,232

0,232

0,232

0,232

�

19,5°

15,5°

13°

14°

10,5°

8,5°

11°

8°

6,5°

7°

5°

3,5°

4°

2,5°

2°

2°

1,5°

1°

3°

2°

1,5°

–

–

–

–

–

–

–

–

–

–

–

–

–

–

apDc2

1

1

1

1,5

1,5

1,5

2

2

2

3

3

3

4

4

4

5

5

5

6

6

6

8

8

8

8

10

10

10

10

10

12

12

12

12

12

r�2

0,07

0,07

0,07

0,1

0,1

0,1

0,15

0,15

0,15

0,2

0,2

0,2

0,25

0,25

0,25

0,3

0,3

0,3

0,35

0,35

0,35

0,6

0,4

0,4

0,4

0,45

0,45

0,45

0,45

0,45

0,5

0,5

0,5

0,5

0,5

�

–

–

0,5

–

–

0,5

–

–

0,5

–

–

0,5

–

–

0,5

–

–

0,5

–

–

0,5

–

–

–

–

–

0,5

–

–

0,5

–

–

–

–

0,5

JHF980 A / B / C / D

63

62

13

19

23

29

43

45

Dimensions in mm

Type Part No. Dra

win

g A

/B/C

/D

JHF980 HFM

Tolerances:• Run-out = 0,01 mm• dmm = h5• Dc = –0,02/–0,05 mm• r�1 = +/-0,05 mm

rp = programming radius * Uncut thickness

Picture key symbols see pages 14-15 in Machining Navigator 2008

uncutthickness

21

0,033 x Dc0,03 x Dc

0,027 x Dc0,024 x Dc0,024 x Dc0,024 x Dc0,024 x Dc0,018 x Dc0,018 x Dc0,018 x Dc0,021 x Dc

1 x ap1 x ap1 x ap

0,8 x ap0,8 x ap0,8 x ap1 x ap1 x ap

0,5 x ap0,5 x ap0,5 x ap

Dc2Dc2Dc2Dc2Dc2Dc2Dc2Dc2Dc2Dc2Dc2

MMMMMMMMEEE

1-23-45-6

7a >48-56 HRc8-9

10-1112-1314-15

202122

350-250250-200200-150110-80140-110110-80

200-150150-100

60-4040-20

130-100

0,055 x Dc20,05 x Dc2

0,045 x Dc20,04 x Dc20,04 x Dc20,04 x Dc20,04 x Dc20,03 x Dc2

0,024 x Dc20,024 x Dc20,035 x Dc2

1 x ap1 x ap1 x ap

0,8 x ap0,8 x ap0,8 x ap1 x ap1 x ap

0,5 x ap0,5 x ap0,5 x ap

0,5 x Dc20,5 x Dc20,5 x Dc20,5 x Dc20,5 x Dc20,5 x Dc20,5 x Dc20,5 x Dc20,5 x Dc20,5 x Dc20,5 x Dc2

350-250250-200 200-150 110-80

140-110110-80

200-150150-10060-4040-20

130-100

Dc2

1,5234568

1012

0,10,150,2

0,250,3

0,350,4

0,450,5

ap

0,01 x Dc20,01 x Dc20,01 x Dc2

0,007 x Dc20,007 x Dc20,007 x Dc20,007 x Dc20,006 x Dc20,006 x Dc20,006 x Dc20,007 x Dc2

2 x Dc22 x Dc22 x Dc22 x Dc22 x Dc22 x Dc22 x Dc22 x Dc22 x Dc22 x Dc22 x Dc2

0,3 x Dc20,3 x Dc20,3 x Dc20,3 x Dc20,3 x Dc20,3 x Dc20,3 x Dc20,3 x Dc20,3 x Dc20,3 x Dc20,3 x Dc2

MMMMMMMMEEE

1-23-45-6

7a >48-56 HRc8-9

10-1112-1314-15

202122

250-175175-140140-11075-55100-7575-55

140-110110-7040-3030-1590-70

Slotting

JHF980 Slot and side milling

aemm

aemm

***pdap

mm

Plunging


SecoMaterial

Group

Slot millingfroughing

Coolant*

* E = Emulsion M = Mist spray A = AirIf mistspray is not available use emulsion

** Reduce ap 20% and Feed per tooth 15% when using ML version** Reduce ap 40% and Feed per tooth 30% when using L version*** pd = plunge depth

**fzmm/tooth

vc m/min


**fzmm/tooth

vc m/min

SecoMaterial

Group

Plunge milling

Coolant*fz

mm/toothvc

m/min

Ramping angle: 1,5 degrees

**apmax

**apmax

This tool is not centre cutting, therefore the depth of cut limit on the Z axis is always according to the ap value in this table.

ap table** Side milling

Plunging

22

Slot milling Roughing


m/min**fz

mm/tooth **ap max. ae

Soft Steel 1-2 M 350-250 0,033xDc2 1 x ap Dc2

Normal Steel 3-4 M 250-200 0,030xDc2 1 x ap Dc2

Tool Steel <48 HRc 5-6 M 200-150 0,027xDc2 1 x ap Dc2

Stainless Steel 8-9 M 140-110 0,024xDc2 0,8 x ap Dc2

Difficult stainless Steel 10-11 M 110-80 0,024xDc2 0,8 x ap Dc2

Soft cast iron 12-13 M 200-150 0,024xDc2 1 x ap Dc2

Hard cast iron 14-15 M 150-100 0,018xDc2 1 x ap Dc2

Superalloys 20 E 60-40 0,018xDc2 0,5 x ap Dc2

Difficult superalloys 21 E 40-20 0,018xDc2 0,5 x ap Dc2

Titanium based alloys 22 E 130-100 0,021xDc2 0,5 x ap Dc2

** Reduce ap - 20% and Feed per tooth with - 15% at ML version ** Reduce ap - 40% and Feed per tooth with - 30% at L version



m/min**fz

mm/tooth **ap max. ae

Soft Steel 1-2 M 350-250 0,055xDc2 1 x ap 0,5xDc2

Normal Steel 3-4 M 250-200 0,050xDc2 1 x ap 0,5xDc2

Tool Steel <48 HRc 5-6 M 200-150 0,045xDc2 1 x ap 0,5xDc2

Stainless Steel 8-9 M 140-110 0,040xDc2 0,8 x ap 0,5xDc2

Difficult stainless Steel 10-11 M 110-80 0,040xDc2 0,8 x ap 0,5xDc2

Soft cast iron 12-13 M 200-150 0,040xDc2 1 x ap 0,5xDc2

Hard cast iron 14-15 M 150-100 0,030xDc2 1 x ap 0,5xDc2

Superalloys 20 E 60-40 0,024xDc2 0,5 x ap 0,5xDc2

Difficult superalloys 21 E 40-20 0,024xDc2 0,5 x ap 0,5xDc2

Titanium based alloys 22 E 130-100 0,035xDc2 0,5 x ap 0,5xDc2

** Reduce ap - 20% and Feed per tooth with - 15% at ML version ** Reduce ap - 40% and Feed per tooth with - 30% at L version * E=Emulsion M=Mist spray A=Air

Plunge milling


m/minfz

mm/tooth *ap-sd ae

Soft Steel 1-2 M 250-175 0,01xDc2 2 x Dc2 0,3xDc2

Normal Steel 3-4 M 175-140 0,01xDc2 2 x Dc2 0,3xDc2

Tool Steel <48 HRc 5-6 M 140-110 0,01xDc2 2 x Dc2 0,3xDc2

Stainless Steel 8-9 M 100-75 0,007xDc2 2 x Dc2 0,3xDc2

Difficult stainless Steel 10-11 M 75-55 0,007xDc2 2 x Dc2 0,3xDc2

Soft cast iron 12-13 M 140-110 0,007xDc2 2 x Dc2 0,3xDc2

Hard cast iron 14-15 M 110-70 0,006xDc2 2 x Dc2 0,3xDc2

Superalloys 20 E 40-30 0,006xDc2 2 x Dc2 0,3xDc2

Difficult superalloys 21 E 30-15 0,006xDc2 2 x Dc2 0,3xDc2

Titanium based alloys 22 E 90-70 0,007xDc2 2 x Dc2 0,3xDc2

*ap-sd => Plunge step dept *** If mist spray is not available => use emulsion * E = Emulsion M = Mist spray A = Air

ap table

Dc2 ap

1,5 0,10

2 0,15

3 0,20

4 0,25

5 0,30

6 0,35

8 0,40

10 0,45

12 0,50

Ramping angle: 1-1,5 degrees


23

90º

87º 85º 80º 89º 89º/85º

l2 = l2by+aplp = lpby+apl3 = l3by+ap

Minimaster Shanks

Keyway shank

90ºhigh-speed

90º Shrinkfit

Dimension ap = l3 is shown on the insert pages.

24

MM08-12065.0-0000

MM08-10040.0-0007

MM08-10050.0-0007DS

MM08-16070.3-0007MM08-16085.0-0016DSMM08-16100.0-0032DS

MM08-16075.3-3012MM08-10080.0-3023DS

MM08-16120.3-5048M

MM08-32250.0-10069

MM08-16150.0-1030MMM08-12100.0-1035DSMM08-12120.0-1050DSMM08-16150.0-1050MMM08-16150.0-1050DSMM08-16150.0-1070MMM08-16150.0-1070DS

MM08-20250.0-1050DS

8

8

8

888

88

8

8

8888888

8

12

10

10

161616

1610

16

32

16121216161616

20

12

7,6

7,6

7,67,67,6

7,67,6

7,6

7,6

7,67,67,67,67,67,67,6

7,6

17

–

–

223752

2740

72

190

1025272

102102102102

202

0

7

7

71632

3,83,8

2,3

1,1

11,411,411,411,411,411,411,4

11,4

0

7

7

71632

1212

13,7

6,8

3035505050

68,768,7

53,7

65

40

50

7085

100

7580

120

250

150100120150150150150

250

65

30

39

57,66463

6157

72

181

115,6626796967676

139

0,1

0,1

0,1

0,10,40,4

0,10,2

0,2

1,2

0,30,20,10,20,30,20,3

0,8

MM08-

MM08-

MM08-

MM08-MM08-MM08-

MM08-MM08-

MM08-

MM08-

MM08-MM08-MM08-MM08-MM08-MM08-MM08-

MM08-

MM08-0524

MM08-0524

MM08-0524

MM08-0524MM08-0524MM08-0524

MM08-0524MM08-0524

MM08-0543

MM08-0524

MM08-0543MM08-0524MM08-0524MM08-0582MM08-0524MM08-0582MM08-0524

MM08-0524

MM-05044

MM-05019

–

MM-05044––

MM-05044–

MM-05044

MM-05090

MM-05044––

MM-05044–

MM-05044–

–

Part No.

Spare partsDimensions in mm

Dc

Minimaster - Shanks MM08

dmm D4 lpbyØ 8*l3by

Ø 10*l3by l2by lc Insert

Tensionscrew Sleeve

Keyway shank

90˚-shank,high speed90˚-shanks,Shrinkfit90˚- shank

87˚-shank

85˚-shank

80˚-shank

89˚-shanks

89˚/ 85˚-shanks

Please check availability in current price and stock-list.*The dimension is based on the selected insert diameter.Allen key H05-4 for sleeve to be ordered separately.

MM08

25

MM10-16065.0-0000

MM10-10045.0-0007

MM10-12060.0-0007DS

MM10-20075.3-0010MM10-16085.0-0020DSMM10-16105.0-0040DS

MM10-20085.3-3023MM10-12085.0-3024DS

MM10-20140.3-5060

MM10-32250.0-10063

MM10-16160.0-1035MMM10-12100.0-1035DSMM10-14120.0-1050DSMM10-16160.0-1055MMM10-16160.0-1055DSMM10-16160.0-1075MMM10-16160.0-1075DS

MM10-20250.0-1055DS

10

10

10

101010

1010

10

10

10101010101010

10

16

10

12

201616

2012

20

32

16121416161616

20

16

9,6

9,6

9,59,59,5

9,59,5

9,5

9,5

9,59,59,59,59,59,59,5

9,5

17

–

–

253757

3540

90

190

1125272112112112112

202

0

7

7

102040

4,84,8

2,8

1,4

14,314,314,314,314,314,314,3

14,3

0

7

7

102040

2323

14,2

7

3535505050

71,671,6

58,3

65

45

60

7585

105

8585

140

250

160100120160160160160

250

63,2

37

50

606060

5861

76

186

12263,264,6

101,7101,7

8282

146

0,1

0,1

0,1

0,20,2

0,2w

0,20,1

0,3

1,3

0,40,20,20,20,30,30,3

0,9

MM10-

MM10-

MM10-

MM10-MM10-MM10-

MM10-MM10-

MM10-

MM10-


MM10-

MM10-0627

MM10-0627

MM10-061027

MM10-0627MM10-061027MM10-061027

MM10-0627MM10-061027

MM10-0627

MM10-0627

MM10-0651MM10-061027MM10-061027MM10-0688

MM10-061027MM10-0688

MM10-061027

MM10-061027

MM-06032

MM-06020

–

MM-06048––

MM-06048–

MM-06116

MM-06116

MM-06048––

MM-06032–

MM-06032–

–

Part No.


Dc




Tensionscrew Sleeve

Keywayshank90˚-shankhigh speed90˚-shankShrinkfit90˚-shanks

87˚-shanks

85˚-shank

80˚-shank

89˚-shank

89˚/ 85˚-shanks

Please check availability in current price and stock-list.*The dimension is based on the selected insert diameter.Allen key 6SMS795 for sleeve to be ordered separately.

26

MM12-16065.0-0000

MM12-12055.0-0008

MM12-12070.0-0008DS

MM12-20080.3-0012MM12-16095.0-0024DSMM12-16115.0-0048DS

MM12-20095.3-3027MM12-16090.0-3044DS

MM12-20150.3-5049

MM12-32250.0-10058

MM12-16170.0-1040MM12-16120.0-1045DSMM12-16170.0-1060MM12-16170.0-1060DSMM12-16170.0-1080MM12-16170.0-1080DS

MM12-20250.0-1060DS

12

12

12

121212

1212

12

12

121212121212

12

16

12

12

201616

2016

20

32

161616161616

20

16

11,5

11,5

11,411,411,4

11,411,4

11,4

11,4

11,411,411,411,411,411,4

11,4

15,3

–

–

284565

4342

99,7

190

12070

120120120120

120

0

8,5

8,5

122448

3,75,7

3,4

1,7

17,117,117,117,117,117,1

17,1

0

8,5

8,5

122448

24,824,8

14,8

7,3

40456060

74,474,4

69,9

65

55

70

8095115

9590

150

250

170120170170170170

250

63,8

45,3

61

636763

6346

101

191,6

126,871,7

106,6106,6

8787

152

0,1

0,1

0,2

0,20,30,3

0,20,3

0,3

1,3

0,40,30,20,40,40,4

0,9

MM12-

MM12-

MM12-

MM12-MM12-MM12-

MM12-MM12-

MM12-

MM12-

MM12-MM12-MM12-MM12-MM12-MM12-

MM12-

MM12-0637

MM12-0637

MM12-061037

MM12-0637MM12-061037MM12-061037

MM12-0637MM12-061037

MM12-0637

MM12-0637

MM12-0637MM12-061037MM12-0637

MM12-061037MM12-0637

MM12-061037

MM12-061037

MM-06032

MM-06020

–

MM-06048––

MM-06048–

MM-06116

MM-06116

MM-06116–

MM-06116–

MM-06116–

–

0

8,5

8,5

122448

2743,8

26,2

13

404560608080

74,3

Part No.


Dc




Tensionscrew Sleeve

Keyway shank

90˚-shank,high speed90˚-shank,Shrinkfit90˚-shanks

87˚-shank

85˚-shank

80˚-shank

89˚-shanks

89˚/ 85˚-shank


MM12

Ø 16*l3by

27

MM16-20070.0-0000

MM16-16070.0-0011M

MM16-20080.0-0011DS

MM16-25100.3-0019MM16-20150.0-0038DSMM16-20160.0-0076DSMM16-16150.0-0080DS

MM16-20115.3-3045MM16-25115.3-3035

MM16-25170.3-5056

MM16-32250.0-10047

MM16-20130.0-1045DSMM16-20190.0-1055MMM16-25170.0-1060MM16-20190.0-1075MMM16-20190.0-1075DSMM16-20190.0-1095MMM16-20190.0-1095DS

MM16-25250.0-1075DS

16

16

16

16161616

1616

16

16

16161616161616

16

20

16

20

25202016

2025

25

32

32202520202020

25

20

15,2

15,2

15,215,215,215,2

15,215,2

15,2

15,2

15,215,219

15,215,215,215,2

15,2

10

–

–

4090

100100

6559

114

190

190130110130130130130

190

0

11,3

11,3

19387680

7,67,6

4,5

2,2

2,222,8

022,822,822,822,8

22,8

0

11,3

11,3

19387680

45,735

27,4

13,6

13,655

28,675759595

87,4

70

70

80

100150160150

115115

170

250

250190170190190190190

250

69

57,2

65

77108,480,368

6976

114

202

202132,2106,7112

112,592,892,8

134

0,2

0,1

0,3

0,30,50,60,3

0,20,3

0,5

1,3

1,30,60,50,50,60,50,5

1,3

MM16-

MM16-

MM16-

MM16-MM16-MM16-MM16-

MM16-MM16-

MM16-

MM16-


MM16-

MM16-1045

MM16-1045

MM16--1045

MM16-1045MM16--1045MM16--1045MM16--1045

MM16-1045MM16-1045

MM16-1045

MM16-1045

MM16--1045MM16-1093MM16-1093MM16-1093MM16--1045MM16-10113MM16--1045

MM16--1045

MM-10030

MM-10030

–

MM-10062–––

MM-10062MM-10062

MM-10132

MM-10132

–MM-10062MM-10062MM-10062

–MM-10062

–

–

Part No.


Dc




Tensionscrew Sleeve

Keyway shank

90˚-shank,high speed90˚-shank,Shrinkfit90˚-shanks

87˚-shank

85˚-shank

80˚-shank

89˚-shanks

89˚/ 85˚-shank


MM16

28

MM08-08.40-HF-MD06

MM10-10.50-HF-MD08

MM12-12.60-HF-MD10

MM16-16.60-HF-MD12

F40M

F30M

F15M

T60M

[

[

[

[

[

[

8,0

10,0

12,0

16,0

4,0

5,0

6,5

10,0

0,4

0,5

0,6

0,6

6,8

8,5

10,2

17,2

2

2

2

3

MM0612

MM0612

MM0612

MM0416

Seco Mat

group No.

Grades

F15M F30M

1 490 430

2 430 375

3 360 315

4 330 285

5 265 235

6 230 210

7 160 140

8 – 280

9 – 240

10 – 205

11 – 160

12 285 250

13 255 225

14 235 205

15 190 165

16 1300 1200

17 1100 950

20 80 70

21 50 45

22 80 70

InsertDiameter

fzfeed / tooth (mm)

�Ramping angle (°)

rpProgramming

8 mm 0,3 - 0,6 * 0,8

10 mm 0,3 - 0,7 * 1,0

12 mm 0,3 - 0,8 * 1,2

16 mm 0,3 - 0,8 8,0 1,4

Feed / Ramping angle / Programming radius

Inserts

* No limitation - centre cutting

Minimaster HFM cutting data

Cutting speed : vc (m/min) Cutting data copy milling

Inserts Part No.

Grades

Coated Others

Dimensions in mm

D R ap l3 zc-value Wrench

29

Dc

R217.21 -1416.0-R080.2 -1820.0-R100.2 -2025.0-R100.2 -2525.0-R100.3 -2532.0-R125.2 -3232.0-R125.3

R217.21 -0816.RE-R80.2 -1020.RE-R100.2A -1020.RE-R100.2HA -1225.RE-R100.3A -1225.RE-R125.2HA -1632.RE-R160.2HA -1632.RE-R125.3A -1635.RE-R125.3A -1640.RE-R160.3HA -1640.RE-R125.4A

911,416,416,42121

911,410,416,412162124

23,929

222323

2223223334

0,20,30,40,61,01,1

0,10,10,10,10,10,20,20,20,20,3

534003260029100291001970019700

53400326003260029100291001620019700188001450017600

218.19-080218.19-100218.19-125-T3218.19-160-04

T07P-3T08P-3T09P-3T15P-3

C02205-T07PC02506-T08PC03007-T09PC03508-T15P

0,91,22,03,0

dmm

141820252532

––––––––––

l2

150160170170195195

––––––––––

M

––––––

M08M10M10M12M12M16M16M16M16M16

218.19-080..218.19-100..218.19-100..218.19-100..218.19-125..218.19-125..

218.19-080..218.19-100..218.19-100218.19-100..218.19-125218.19-160..218.19-125..218.19-125..218.19-160..218.19-125..

Dc2

162025253232

16202025253232354040

l1

––35–40–

23282835354040404040

lp

105110120114139135

––––––––––

ap

0,60,70,70,71,01,0

0,60,71,00,71,51,81,01,01,81,0

For insert

Spare partsKeyLocking screw Torque value

Nm

HFM

R217.21

Part No.

Dimension in mm

Cylindrical Combimaster

Type of mounting Insert

High feed cutters

CylindricalCylindricalCylindricalCylindricalCylindricalCylindrical

Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*

30

16222732

dmm

R220.21-0040–0042R220.21-0050–0052R220.21-0063–0080R220.21-0100

16222732

D5m

35476277

Bkw

8,410,412,414,4

c

5,66,378

Dc

R220.21 -0040-R125.4A -0042-R125.4A -0050-R160.3A -0050-R160.4A -0052-R160.4A -0063-R160.4A -0063-R160.5A -0066-R160.5A -0080-R160.6 -0100-R160.7

2931363638

49,549,552,566,586,5

4434445567

0,20,20,40,40,40,50,50,60,91,4

1760017200129001290012700115001150011200102009100

Dc2

404250505263636680

100

l1

40404040405050505050

ap

1,01,01,81,81,81,81,81,81,81,8

218.19-125..218.19-125..218.19-160..218.19-160..218.19-160..218.19-160..218.19-160..218.19-160..218.19-160..218.19-160..

T09P-3T15P-3T15P-3T15P-3

C03007-T09PC03508-T15PC03508-T15PC03508-T15P

2,03,03,03,0

220.17-690220.17-691

MC6S 12x35–

For cutter

Dimension in mm

Dimensions of mounting

Forarbor

HFM

R220.21 High feed cutters

Part No.

Dimension in mm

Insert

For cutter


Values (Nm)

Dia 40–42 mmDia 50–52 mmDia 63–66–80 mmDia 100 mm

Arbor screw

31

22272727324040

––––––

ISO40

dmm

R220.21-0050-0052R220.21-0063R220.21-0066R220.21-0080R220.21-0084-0100R220.21-0125R220.21-8160

22272727324040

D5m

42506062779090

Bkw

10,412,412,412,414,416,416,4

c dhc1

6,3777899

––––––

66,7

Dc

R220.21 -0050.SC12.3A -0050-SC12.4A -0052-SC12.4A -0063-SC12.3A -0063-SC12.4A -0066-SC12.4A -0080-SC12.4A -0080-SC12.5A -0084-SC12.5A -0100-SC12.5A -0125-SC12.6A -8160-SC12.7

31313344444761616581106141

T20P-4T20P-4T20P-4T20P-4

C45011-T20PC45011-T20PC45011-T20PC45011-T20P

5,05,05,05,0

220.17-692MMC6S 12x35MC6S 16x40

–

R220.21–0050-0052R220.21–0063-0080R220.21–0084R220.21–0100-8160

Dc2

505052636366808084100125160

ap

222222222222

Dmm

222222272727272732324040

D5m

424242505060626277779090

l1

404040505050505055506363

344334455567

0,30,30,30,50,50,60,90,91,21,32,43,8

107001070010500960096009400850085008300760068006000

SCET120630T..SCET120630T..SCET120630T..SCET120630T..SCET120630T..SCET120630T..SCET120630T..SCET120630T..SCET120630T..SCET120630T..SCET120630T..SCET120630T..

R220.21 High feed cutters

For cutter

Dimension in mm


HFM

Part No.

Dimension in mm

For cutter


Values (Nm)Arbor screw

Insert

Forspindle-nose

Forarbor

32

Seco Mat.

group No.

RoughingFirst choice

Grades

MP1500 MP2500 T350M MS2500 MH1000 MK2000 MK3000 F15M F25M F30M F40M H25

1 218.19-M 505 450 390 490 – 445 410 – 375 360 340 –

2 218.19-M 445 395 345 430 – 385 360 – 330 315 300 –

3 218.19-M 370 330 285 360 – 325 300 – 275 260 250 –

4 218.19-MD 340 300 260 325 – 295 275 270 250 240 225 –

5 218.19-MD 275 245 210 265 – 240 225 220 205 195 185 –

6 218.19-MD 200 180 155 195 – 175 165 160 150 140 135 –

7 218.19-MD – – – – 160 – – 140 – 120 – –

8 218.19-M – 260 240 280 – – – – – 230 220 –

9 218.19-M – 225 210 245 – – – – – 200 190 –

10 218.19-M – 195 180 210 – – – – – 170 165 –

11 218.19-M – 150 140 165 – – – – – 135 130 –

12 218.19-MD 295 260 230 285 290 260 240 240 220 210 – –

13 218.19-MD 265 235 205 255 255 230 215 215 195 185 – –

14 218.19-MD 245 215 190 235 235 210 195 195 180 170 – –

15 218.19-MD 195 175 150 190 190 170 160 160 145 140 – –

16 218.19-E – – – – – – – – – 970 – 975

17 218.19-E – – – – – – – – – 780 – 785

20 218.19-M – – 60 75 – – – – – 60 55 –

21 218.19-M – – 40 50 – – – – – 35 35 –

22 218.19-M – – 60 75 – – – – – 60 55 –

R217/220.21 (218.19 insert type)

Cutting speed: vc (m/min) Cutting data copy milling

Insertdimension

Feed, fz

(mm/tooth)

Max ap

(mm)

Initial valuesrp

(mm)Uncut

thickness (mm)fz ap

218.19-080.. 0,3 - 0,8 0,6 0,4 0,4 1 0,30218.19-100.. 0,5 - 1,5 0,7 0,6 0,5 1,5 0,44

218.19-125.. 0,5 - 2,0 1,0 1 0,8 1,7 0,60

218.19-160.. 0,5 - 3,0 1,8 1,2 1,5 2,85 0,97

Diameter (mm)

�(°)

16 6,520 6,0

25 3,5

32 3,5

35 3,0

40 2,5

42 2,0

50 3,9

52 3,7

63 2,7

66 2,5

80 1,9

100 1,4

Feed

Ramping angle

Diameter (mm)Dc2

Dia (mm)C min

Dia (mm)C max

Max ap

(mm)

16 25 30 0,620/20HA 31 38 0,7

25 41 48 0,7

25HA 39 48 1,0

32 53 62 1,0

32HA 49 62 1,8

35 59 68 1,0

40 69 78 1,0

40HA 65 78 1,8

42 73 82 1,0

50 86 96 1,8

52 90 102 1,8

63 112 124 1,8

66 118 130 1,8

80 145 158 1,8100 185 198 1,8

Helical interpolation

Input corner (rp°)

Programming radius

Uncut thickness

33

Seco Mat.

group No.


Grades

MP1500 MP2500 T350M MS2500 MH1000 MK2000 MK3000 F15M F25M F30M F40M H25

1 218.19-M 230 215 205 220 – 215 205 – 215 195 210 –

2 218.19-M 210 205 190 210 – 205 190 – 200 180 195 –

3 218.19-M 180 170 160 175 – 170 160 – 170 155 160 –

4 218.19-MD 160 150 140 155 – 150 140 155 145 135 140 –

5 218.19-MD 145 125 115 130 – 125 115 130 125 110 110 –

6 218.19-MD 120 110 100 115 – 110 100 115 105 95 95 –

7 218.19-MD – – – – 90 – – 70 – 50 – –

8 218.19-M – 200 190 205 – – – – – 185 190 –

9 218.19-M – 175 165 180 – – – – – 155 165 –

10 218.19-M – 140 130 145 – – – – – 120 150 –

11 218.19-M – 125 120 130 – – – – – 115 120 –

12 218.19-MD 250 240 220 245 260 250 220 215 190 210 – –

13 218.19-MD 220 210 190 215 230 220 190 185 165 180 – –

14 218.19-MD 200 190 170 195 210 200 170 165 145 160 – –

15 218.19-MD 170 160 150 170 185 170 150 135 120 140 – –

16 218.19-E – – – – – – – – 1000 – 1200

17 218.19-E – – – – – – – – 600 – 800

20 218.19-M – – 55 60 – – – – – 50 50 –

21 218.19-M – – 30 40 – – – – – 30 30 –

22 218.19-M – – 55 60 – – – – – 50 50 –

R217/220.21 Cutting data plunge milling

Cutting speed: vc (m/min)

Bold figures represent first choise in each material group

Diameter( mm )

Insertdimension

fz( mm/tooth )

Max ae( mm )

16 218.19-080.. 0,09 520 218.19-100.. 0,11 7

25 218.19-100.. 0,11 7

25 218.19-125.. 0,13 9

32 218.19-125.. 0,13 9

32 218.19-160.. 0,15 11

35 218.19-125.. 0,13 9

40 218.19-125.. 0,13 9

40 218.19-160.. 0,15 11

42 218.19-125.. 0,13 9

50 218.19-160.. 0,15 11

52 218.19-160.. 0,15 11

63 218.19-160.. 0,15 11

66 218.19-160.. 0,15 11

80 218.19-160.. 0,15 11100 218.19-160.. 0,15 11

Plunging - Axial feed direction

34

Seco Mat

group No.


Grades

MP1500 MP2500 T350M MS2500 F40M

1 SCET120630T-M14 510 450 395 490 340

2 SCET120630T-M14 445 395 345 430 300

3 SCET120630T-M14 370 330 285 360 250

4 SCET120630T-MD16 340 300 260 330 230

5 SCET120630T-MD16 275 245 215 265 185

6 SCET120630T-MD16 200 180 155 195 135

7 SCET120630T-MD16 65 – – – –

8 SCET120630T-M14 330 260 245 280 220

9 SCET120630T-M14 285 225 210 245 190

10 SCET120630T-M14 245 195 180 210 165

11 SCET120630T-M14 190 150 140 165 130

12 SCET120630T-MD16 295 265 230 285 200

13 SCET120630T-MD16 265 235 205 255 180

14 SCET120630T-MD16 245 215 190 235 165

15 SCET120630T-MD16 195 175 150 190 130

16 SCET120630T-M14 – – – – –

17 SCET120630T-M14 – – – – –

20 SCET120630T-M14 – – 65 75 55

21 SCET120630T-M14 – – 40 50 35

22 SCET120630T-M14 – – 65 75 55

Dia(mm)

Insertdimension

fzmm/tooth

Max ap(mm)

Initial values

rp(mm)

UncutThickness (mm)fz ap

50-160 SCET120630T 0,5 - 3,0 2 1,2 1,5 4,4 1,1

Initial values

Dia(mm)

�(°)

50 2,30

52 2,20

63 0,90

66 0,85

80 0,80

84 0,80

100 0,75

125 0,70

160 0,65

Ramping angle

Milling cutter diameter C min / ap max C max / ap max

220.21-SC12 Ø Dc mm Ø Dc2 mm Ø C min ap max Ø C max ap max

Ø 50 31 50 81 1 98 1

Ø 52 33 52 85 1 102 1

Ø 63 44 63 107 1 124 1

Ø 66 47 66 113 1 130 1

Ø 80 61 80 141 1 158 1

Ø 84 65 84 149 1 166 1

Ø 100 81 100 181 1 198 1

Ø 125 106 125 231 1 248 1

Ø 160 141 160 301 1 318 1


Bold figures represent first choice in each material group.

R220.21 (SCET120630T - insert type)

Cutting speed: vc (m/min) Cutting data copy milling

35

R217.21 (218.19-100T-MD08-LF, CBN200)

PCBN cutting data milling Cutting speed: vc (m/min)

Seco Material Group No.

Rec. ap(mm)

PCBN machining First choice

Grade

CBN200

7 0,3 218.19-100T-MD08-LF 400/700

13 0,5 218.19-100T-MD08-LF

500/150014 0,5 218.19-100T-MD08-LF

15 0,5 218.19-100T-MD08-LF

Dia(mm)

Insertdimension

fzmm/tooth

Max ap(mm)

rp(mm)

Uncutthickness (mm)

20-25 218.19-100T-MD028-LF 0,4/1,0 0,7 1,5 0,44

Feed and depth recommendation

Dia(mm)

�(°)

20 6,0

25 3,5

Ramping angle


Milling cutter diameter C min/ap max C max/ap max

R217.21 Ø Dc mm Ø Dc2 mm Ø C mm ap max Ø C max ap max

Ø20 11,4 20 31,4 1 38 0,7

Ø25 16,4 25 41,4 1 48 0,7

36

Dc

R217.29 -2532.0-06.2.140

R217.29 -3232.3-06.3.060 -3240.3-06.4.075

R217.29 -0432.2-06.3.060 -0440.2-06.4.085 -0450.2-06.4.060

R217.29 -1224.RE-06.2A -1225.RE-06.2A -1232.RE-06.2A -1232.RE-06.3A -1632.RE-06.2A -1632.RE-06.3A -1635.RE-06.2A -1635.RE-06.3A -1635.RE-06.4A -1640.RE-06.3A -1640.RE-06.4A -1642.RE-06.4A -1642.RE-06.5A

20

2028

202838

12132020202023232328283030

2

34

344

2223232343445

0,8

0,60,7

0,70,91,1

0,20,20,20,20,20,20,30,30,30,30,30,30,3

15600

1560014000

156001400012500

18100177001560015600156001560015000150001500014000140001360013600

R217.29-.. T15P-3C03508-T15P

dmm

25

3232

–––

–––––––––––––

l2

196

120135

162187162

–––––––––––––

l3

140

4975

538560

–––––––––––––

RP..1204

RP..1204RP..1204

RP..1204RP..1204RP..1204

RP..1204RP..1204RP..1204RP..1204RP..1204RP..1204RP..1204RP..1204RP..1204RP..1204RP..1204RP..1204RP..1204

Dc2

32

3240

324050

24253232323235353540404242

l1

–

8499

–––

35354040404040404040404040

lp

140

6075

608560

–––––––––––––

lc

161

7070

108,5108,5108,5

–––––––––––––

M

–

––

M16M16M16

M12M12M12M12M16M16M16M16M16M16M16M16M16

ap

6

66

666

6666666666666

For cutter

Spare partsKey*Locking screw

HFM

217.29-06

Part No.

Dimension in mm

Cylindrical

Type of mounting

Cyl/Weldon Morse taper Combimaster

Tool angles: �o = -12°–- -2° �p = +4° �f = 12°–- -2°

Cylindrical

Cyl/WeldonCyl/Weldon

Morse No.4Morse No.4Morse No.4

Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*Combimaster*

37

1622

dmm

R220.29-0040–0044R220.29-0050

1622

D5m

3547

Bkw

8,410,4

c

5,66,3

Dc

R220.29 -0040-06.3A -0040-06.4A -0044-06.4A -0050-06.3A -0050-06.4A -0050-06.5A

282832383838

344345

0,20,20,20,30,30,3

140001400013300125001250012500

Dc2

404044505050

l1

404040404040

ap

666666

RP..1204RP..1204RP..1204RP..1204RP..1204RP..1204

T15P-3T15P-3

C03508-T15PC03508-T15P

220.17-690220.17-691

R220.29-0040–0044R220.29-0050

For cutter

Dimension in mm


Forarbor

HFM

220.29-06

Part No.

Dimension in mm

For cutter

Spare partsKey*Locking screw Arbor screw

Tool angles: �o = -3°–- -2° �p = +4° �f = 3°–- -2°

38

2227

dmm

R220.29-0052–0063R220.29-0066

2227

D5m

4762

Bkw

10,412,4

c

6,37

Dc

R220.29 -0052-06.4A -0052-06.5A -0062-06.6A -0063-06.4A -0063-06.5A -0063-06.6A -0066-06.6A

40405051515154

4564566

0,30,30,30,40,40,40,7

12300123001120011200112001120010900

Dc2

52526263636366

l1

40404040404050

ap

6666666

RP..1204RP..1204RP..1204RP..1204RP..1204RP..1204RP..1204

T15P-3T15P-3

C03508-T15PC03508-T15P

220.17-692MC6S 12x35

R220.29-0052–0063R220.29-0066

For cutter

Dimension in mm


Forarbor

HFM

220.29-06

Part No.

Dimension in mm

For cutter


Tool angles: �o = -2°–- 0° �p = +4° �f = -2°–- 0°

39

273240

dmm

R220.29-0075–0080R220.29-0092–0112R220.29-0137

273240

D5m

627790

Bkw

12,414,416,4

c

789

Dc

R220.29 -0075-06.6A -0080-06.6A -0080-06.7A -0092-06.7A -0112-06.7A -0137-06.8A

63686880100125

667778

0,91,01,01,01,62,8

102001000010000920084007600

Dc2

75808092112137

l1

505050505063

ap

666666

RP..1204RP..1204RP..1204RP..1204RP..1204RP..1204

T15P-3T15P-3

C03508-T15PC03508-T15P

MC6S 12x35–

R220.29-0075–0092R220.29-0112–0137

For cutter

Dimension in mm


Forarbor

HFM

220.29-06

Part No.

Dimension in mm

For cutter


Tool angles: �o = -4°–- 0° �p = +4° �f = -4°–- 0°

40

Dc

R217.29 -1632.RE-08.2A -1640.RE-08.3A

1624

23

0,20,3

1220010900

R217.29-1632..R217.29-1640..

T20P-4T20P-4

C05010-T20PC05013-T20P

Dc2

3240

l1

4040

M

M16M16

RP..1605RP..1605

ap

88

For cutter

Spare partsKey*Locking screw

HFM

217.29-08

Part No.

Dimension in mm

Combimaster

Tool angles: �o = -4°–- -3° �p = -7°–- -5° �f = -4°–- -3°

41

2227

dmm

R220.29-0050–0063R220.29-0066–0080

2227

D5m

4762

Bkw

10,412,4

c

6,37

Dc

R220.29 -0050-08.3A -0052-08.4A -0063-08.4A -0063-08.5A -0066-08.5A -0066-08.6A -0080-08.5A -0080-08.6A

3436474750506464

34455656

0,40,40,60,60,60,60,91,0

97009600870087008400840077007700

Dc2

5052636366668080

l1

5050505050505050

ap

88888888

RP..1605RP..1605RP..1605RP..1605RP..1605RP..1605RP..1605RP..1605

T20P-4T20P-4T20P-4

C05013-T20PC05013-T20PC05013-T20P

220.17-692M220.17-692

MC6S 12x35

R220.29-0050–0052R220.29-0063R220.29-0066–0080

For cutter

Dimension in mm


Forarbor

HFM

220.29-08

Part No.

Dimension in mm

For cutter


Tool angles: �o = -2°–- 0° �p = 0° –- +4° �f = -2°–- 0°

42

324040

dmm

R220.29-0100R220.29-0125R220.29-8160

324040

Dc

R220.29 -0100-08.6MA -0100-08.7A -0125-08.6MA -0125-08.8A -8160-08.7M -8160-08.9

8484109109144144

676879

1,21,22,42,43,83,9

680068006100610054005400

Dc2

100100125125160160

l1

505063636363

ap

888888

RP..1605RP..1605RP..1605RP..1605RP..1605RP..1605

T20P-4T20P-4T20P-4T20P-4T20P-4T20P-4

C05018-T20PC05013-T20PC05018-T20PC05013-T20PC05018-T20PC05013-T20P

SRP1604M0–

SRP1604M0–

SRP1604M0–

R220.29-0100–08.6R220.29-0100–08.7R220.29-0125–08.6R220.29-0125–08.8R220.29-8160–08.7R220.29-8160–08.9

CA5010–

CA5010–

CA5010–

H05-4–

H05-4–

H05-4–

––

ISO 40

D5m

779090

Bkw

14,416,416,4

c

899

dmc1

––

66,7

For cutter

Dimension in mm


Forarbor

HFM

220.29-08

Part No.

Dimension in mm

For cutter

Spare partsKey*Locking screw Anvil

Tool angles: �o = 0° �p = +4° �f = 0°

Anvil screw Key

Forspindle-nose

43

Seco Matgroup No. Roughing

First choice

Grades

MP1500 MP2500 T350M MS2500 MK3000 F25M F40M

1 T350M 480 425 370 – 390 355 320

2 T350M 420 370 325 – 340 310 280

3 T350M 350 310 270 – 285 255 235

4 MS2500 320 280 245 310 260 235 215

5 MS2500 260 230 200 250 210 190 175

6 MP2500 190 170 145 185 155 140 125

7 – – – – – – – –

8 F40M 310 245 230 265 240 230 205

9 F40M 270 215 200 230 210 200 185

10 F40M 230 180 170 195 180 170 155

11 F40M 180 140 130 155 140 130 120

12 MK3000 280 245 215 – 225 205 185

13 MK3000 250 220 190 – 200 185 165

14 MK3000 230 205 175 – 185 170 155

15 MK3000 185 165 145 – 150 135 125

16 F40M – 1145 1000 – 1050 955 870

17 F40M – 925 805 – 850 770 700

20 MS2500 – 65 60 70 60 60 55

21 MS2500 – 40 35 45 40 35 35

22 MS2500 – 65 60 70 60 60 55

InsertSize

Insertdesignation

fzmm/tooth

Max ap(mm)

Initial values

fz ap

12 mm RPHT1204M0T-M15 0,3-1,5 2,5 0,6 2,0

16 mm RPHT1605M0T-M18 0,4-2,0 3,0 0,7 2,5

Feed

HFM cutting speed and feed recommendations

RPHT1204M0T-M15, RPHT1605M0T-M18 Cutting speed: vc (m/min) Cutting data copy milling

44

Cutterdesignation

Dia (mm)Dc2

Dia (mm)C min

Dia (mm)C max

Max ap(mm)

R217/220.29 - 06 16 25 30 2,5

20 28 38 2,5

24 36 46 2,5

25 38 48 2,5

32 52 62 2,5

35 58 68 2,5

40 68 78 2,5

42 72 82 2,5

44 76 86 2,5

50 88 98 2,5

52 92 102 2,5

62 112 122 2,5

63 114 124 2,5

66 120 130 2,5

75 138 148 2,5

80 148 158 2,5

92 172 182 2,5

112 212 224 2,5

137 262 272 2,5

R217/220.29 - 08 32 48 62 3,0

40 64 78 3,0

50 84 98 3,0

52 86 102 3,0

63 110 124 3,0

66 116 130 3,0

80 144 158 3,0

100 184 198 3,0

125 234 248 3,0

160 304 318 3,0

Cutterdesignation

Dia (mm)Dc2

� ( ° )

R217/220.29 - 06 16 30,0

20 30,0

24 90,0

25 90,0

32 14,7

35 12,0

40 9,3

42 4,2

44 7,9

50 6,4

52 6,0

62 4,7

63 4,6

66 4,3

75 3,6

80 3,3

92 2,8

112 2,2

137 1,7

R217/220.29 - 08 32 90,0

40 20,0

50 15,5

52 13,0

63 9,5

66 8,5

80 6,0

100 5,0

125 3,5

160 2,5

HFM cutting speed and feed recommendations

Helical interpolation Cutting data copy milling

45

12041605

s

12,016,0

D

4,765,56

D sRPH. 0,013 0,025

RPHT 1204M0T-M15

RPHT 1605M0T-M18

F40M

F30M

F25M

F15M

T350

M

MS2

500

MP1

500

MH

1000

MP2

500

MK

3000

MK

2000

MK

1500

[

[

[

[

[

[

[

[

[

[

[15°

15°

0,20

0,29

0°

15°

M15

M18

HFM inserts

RP..12

Size

Dimensions in mmTolerances: (± mm)

Inserts Part No.

Grades

Coated

Prot. chamfer

Cuttingrake

Widthmm Angle

[ Stock standardSubject to change refer to current price and stock-list

46

-080.-100.-125.-150.-160.

5,507,068,90

10,6011,18

D D R s218.19- 0,01 0,01 0,013-0,07

218.19 -080-E04 -100-E06 -125-T3-E06 -160-04-E07

218.19 -100T-ME05 -125T-T3-ME07 -160T-04-ME08 218.19 -080T-M04 -100T-M06 -125T-T3-M07 -150T-04-M08 -160T-04-M08

218.19 -080T-MD04 -100T-MD08 -125T-T3-MD08 -125T-T3-MD10 -160T-04-MD09 -160T-04-MD11

[

F40M

F30M

F25M

F15M

T350

M

MS2

500

T25M

MP1

500

MH

1000

MP2

500

MK

3000

MK

2000

[[[[

[[

[[[ [

[[

[[[ [

[

[

[[[ [

[[

[

[

[[

[

[

[[[ [

[

[

[[[ [

[[

[

[

[[

[[[[[

[

[

[

[

[

[[ [

[

[

[

[

[

20°20°20°20°

20°20°20°

10°10°10°10°10°

0°0°0°0°0°0°

––––

0,060,080,09

0,050,060,080,090,09

0,050,080,080,090,090,11

––––

20°20°20°

20°20°20°20°20°

20°31°20°31°20°31°

E04–E09

ME07–ME12

CB

N20

0

H25

2,382,783,974,764,76

s

810

12,51516

R

M04–M12

MD04–MD09

0,40,80,81,2

0,80,81,2

0,40,80,81,21,2

0,40,80,80,81,21,2

810

12,516

1012,516

810

12,51516

810

12,512,51616

HFM inserts

218.19

Size


Inserts Part No.

GradesProt. chamfer

Cuttingrake

Widthmm Angle


r�R

47

1206

s

12,7

l

6,35

D s mSCE. 0,025 0,025 0,025 SCM. 0,08 0,13 0,13

SCET 120630T-M14

SCET 120630T-MD16

F40M

F30M

F25M

F15M

T350

M

MS2

500

MP1

500

MH

1000

MP2

500

MK

3000

MK

2000

MK

1500

[

[

[

[

[

[[

[

[

[[15°

15°

0,12

0,12

15°

15°

M14/MD163,0

3,0

HFM inserts

SC..12

Size


Inserts Part No.

Grades

Coated

Prot. chamfer

Cuttingrake

Widthmm Angle


r�

Seco Tools AB, SE-737 82 Fagersta, Sweden. Tel. +46 223 400 00.www.secotools.com

ARGENTINA Seco Tools Argentina S.A. Tel: +54 11 48 92 00 60 Fax: +54 11 47 23 86 00. AUSTRALIA Seco Tools Australia Pty. Ltd. Tel: +61 2 96 76 22 79 (local tel: 1300 55 7326) Fax: +61 2 96 76 61 58 (local fax: 1300 65 7326). AUSTRIA Seco Tools Ges.m.b.H Tel: +43 2253 210 40 Fax: +43 2253 210 4011. BELGIUM Seco Tools Benelux N.V./S.A. Tel: +32 2 389 09 60 Fax: +32 2 389 09 89. BOSNIA See Solvenia. BRAZIL Seco Tools Ind. e Com. Ltda. Tel: +55 15 2101 86 00 Fax: +55 15 2101 8606. BULGARIA See Sweden. CANADA Seco Tools Canada Inc. Tel: +1 905 693 1780 Fax: +1 905 693 1788. CHINA Seco Tools (Shanghai) Co., Ltd. Tel: +86 21 54 26 55 00 Fax: +86 21 64 85 56 85. COLOMBIA Rexco Tools Tel: +57 1 660 6030 Fax: +57 1 311 0026. CROATIA See Slovenia. CZECH REPUBLIC Seco Tools CZ s.r.o. Tel: +420 530 500 811 Fax: +420 530 500 810. DENMARK Seco Tools A/S Tel: +45 43 44 7600 Fax: +45 43 44 5030. FINLAND Seco Tools OY Tel: +358 09 2511 7200 Fax: +358 09 2511 7201. FRANCE Seco Tools France S.A. Tel: +33 2 48 67 27 27 Fax: +33 2 48 67 27 05, Seco EPB Tel: +33 3 88 71 38 89 Fax: +33 3 88 70 98 98, Seco Ets. Planche S.A. Tel: +33 4 74 83 26 54 Fax: +33 4 74 83 26 59. GERMANY Seco Tools GmbH Tel: +49 211 240 10 Fax: +49 211 240 12 75. GREECE Athens Mechanica Tel: +30 210 523 1284/5 Fax: +30 210 523 1286. HUNGARY Seco Tools KFT. Tel: +36 1 267 6720 Fax: +36 1 267 6721. INDIA Seco Tools India (P) Ltd. Tel: +91 21 3766 7300 Fax: +91 21 3766 7410. INDONESIA Seco Tools (SEA) Pte Ltd. Tel: +62 21 7918 6441/6442 Fax: +62 21 7918 6440. ITALY Seco Tools Italia S.p.A. Tel: +39 031 97 81 11 Fax: +39 031 97 85 91 (local fax: 840 000938). JAPAN Seco Tools Japan K.K. Tel: +81 3 37 33 81 11 Fax: +81 3 37 33 81 25. MACEDONIA See Slovenia. MALAYSIA Seco Tools Malaysia SDN. BHD Tel: +60 3 9059 1833 Fax: +60 3 9059 4833. MEXICO Seco Tools de Mexico Tel/Fax: +52 818 350 6311. NETHERLANDS Seco Tools Benlux N.V. Tel: +31 183 63 66 00 Fax: +31 183 66 06 01, Seco Jabro Tools b.v. Tel: +31 77 463 24 44 Fax: +31 77 463 14 54. NEW ZEALAND Seco Tools New Zealand Ltd. Tel: +64 9 415 8441 Fax: + 64 9 415 8442. NORWAY Seco Tools A/S Tel: +47 67 92 73 00 Fax: +47 67 92 73 02. PHILIPPINES See Singapore. POLAND Seco Tools (Poland) Sp. z.o.o. Tel: +48 22 637 5383 Fax: +48 22 637 5384. PORTUGAL Seco Tools Portugal, Lda. Tel: +351 256 371 650 Fax: +351 256 371 659. ROMANIA Seco Tools Romania S.R.L. Tel: +40 268 414 723 Fax: +40 268 476 772. RUSSIA Seco Tools Russia Tel: +7 495 680 1322 Fax: +7 495 680 6241. SERBIA AND MONTENEGRO See Slovenia. SINGAPORE Seco Tools (SEA) Pte. Ltd. Tel: +65 68 41 28 02 Fax: +65 68 41 28 01. SLOVAKIA Seco Tools SK s.r.o. Tel: +421 33 551 3537 Fax: +421 33 551 3538. SLOVENIA Seco Tools SI d.o.o. Tel: +386 2 450 2340 Fax: +386 2 450 2341. SOUTH AFRICA Seco Tools South Africa (Pty.) Ltd. Tel: +27 11 362 2660 Fax: +27 11 362 1893. SOUTH KOREA Seco Tools Korea Ltd. Tel: +82 41 622 9785 Fax: +82 41 622 0985. SPAIN Seco Tools España S.A. Tel: +34 93 474 5533 Fax: +34 93 474 5550. SWEDEN Seco Tools AB Tel: +46 223 400 00 Fax: +46 223 718 60. SWITZERLAND Seco Tools AG Tel: +41 32 332 78 78 Fax: +41 32 332 78 79. TAIWAN Seco Tools (SEA) Taiwan Tel: +886 2 26 57 79 18 Fax: +886 2 26 57 94 61. THAILAND Seco Tools (Thailand) Co. Ltd. Tel: +66 2 74 67 801 Fax: +66 2 74 67 802. TURKEY Seco Tools A.S. Tel: +90 216 569 74 00 Fax: +90 216 575 73 83. UKRAINE Seco Tools Ukraine Tel: +38 056 790 05 44 Fax: +38 056 790 05 43. UNITED KINGDOM Seco Tools (U.K.) Ltd. Tel: +44 1789 76 43 41 Fax: +44 1789 76 11 70. USA Seco Tools Inc. Tel: +1 586 497 50 00 Fax: +1 586 497 5627/5629. VIETNAM Seco Tools (SEA) Pte. Ltd. Tel: +84 8 91 44 393/91 43 164 Fax: +84 8 91 43 164.

02636423 ST20086178 GB SECO TOOLS AB, Grafiska Byrån Örebro/PA Group Karlstad 2008

gb_hfm_brochure_lr

Documents

picture key

high feed

trigon style

high feed

helical interpolation

face milling

cutting forces

nal nishing