259 Gauge Gauge Air Gauge Feeler Gauges Taper Gauge Gauges Gauges Pin & Ring Gauge Thread Plug & Thread Ring Gauge Welding Gauges Item No. WG-1 (M) WG-2 (L) Throat Thickness of Fillet Weld Measurement Accuracy ±0.4mm ±0.2mm Accuracy Angle ±0.7° ±0.7° Accuracy (mm) ±0.4mm ±0.4mm Weight 79g 91g APPLICATION • For measuring weld fillet weld, bead weld etc. MATERIAL • Stainless steel (SUS410) FEATURES • Ef f iciency for welding and quality control • Tough and portable (with plastic bag) WG-1 Front Front Back Back WG-2 Blade 70 14 41 Rotator Body 67 Body Rotator 70.5 56.8 46.8 WG-1 DIMENSION Miscellaneous Measuring Practical Measuring Undercut Measuring (WG-2 Only) Angle Scale Beveling Angle (10mm) Opening Diameter (WG-1 : Under 3.5mm) (WG-2 : Under 5.0mm) Welding Bar Diameter Welding Stick Diameter (WG-1 : Under 10mm) (WG-2 : Under 20mm) Step Difference • Plate Thickness (Under 20mm) General Angle Length (Under 40mm) Root Opening Thickness Root Face Measuring Bead Weld Fillet Weld (Width, Height) Bead Weld (Height) Fillet Weld (Throat Thickness) CAPABILITIES WG-2 SPECIFICATIONS www.sumipol.com
13
Embed
Gauges - · PDF fileTaper Gauge Gauges Gauges Root Limit Gauge APPLICATION • Use for measuring root gap of T joint or facing joint, leg length (height) of fillet weld and excess
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
259
Gauge
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
GaugesPin&
Ring Gauge
Thread Plug &Thread Ring
Gauge
Welding Gauges
Item No.
WG-1 (M)WG-2 (L)
Throat Thickness of FilletWeld Measurement Accuracy
±0.4mm±0.2mm
Accuracy Angle
±0.7°±0.7°
Accuracy (mm)
±0.4mm±0.4mm
Weight
79g91g
APPLICATION• For measuring weld f illet weld, bead weld etc.
MATERIAL• Stainless steel (SUS410)
FEATURES• Ef f iciency for welding and quality control• Tough and portable (with plastic bag)
WG-1
Front
Front
Back
Back
WG-2
Blade
7014 41
Rotator
Body
67
Body
Rotator
70.5
56.8
46.8
WG-1
DIMENSION
MiscellaneousMeasuring
PracticalMeasuring
UndercutMeasuring(WG-2 Only)
AngleScale
Beveling Angle
(10mm)
Opening Diameter(WG-1 : Under 3.5mm)(WG-2 : Under 5.0mm)
Welding Bar DiameterWelding Stick Diameter(WG-1 : Under 10mm)(WG-2 : Under 20mm)
FEATURES• Use for measuring during the welding processes• Very convenient to the welding processes with steel frame assembly such as general welding, ship building, and bridge construction, etc.• Easy reading scale
Welding Gauges
APPLICATION• For wide variety welding measurement (Height of bead weld, Height of f illet weld, Throat thickness of f illet weld, Undercut depth, Beveling angle, Plate thickness and Root opening)
MATERIAL• Stainless steel (SUS410)
APPLICATION• For wide variety welding measurement (Height of bead weld, Height of f illet weld, Throat thickness of f illet weld, Undercut depth, Beveling angle, Plate thickness and Root opening)
MATERIAL• Stainless steel (SUS410)
FEATURES• Use for measuring during the welding processes• Additional function for measurement of plate thickness, width of bead weld, external diameter of circular work piece and swelling of pressure welding of reinforcing iron, etc.• Bead stride width: 53 mm• Beveling angle range (0-70°)• Easy reading scale
Item No.WGU-7MWGU-8M
Weight150g190g
SPECIFICATIONS
Front
Back
WGU-7M WGU-8M
Front
Back
(WGU-7M)DIMENSION
MEASUREMENT FUNCTION
(WGU-8M)DIMENSIONVernier 95
117
105
78
4282
BodyRotator
Vernier
Body 53Rotator
70
Height of fillet weld & bead weld4 Throat thickness of filletweld (0~15mm)
External diameter of circular workpieceswelling of pressure welding etc.(WGU-8M : External Ø of circular workpiece up to 30mm)(WGU-9M : External Ø of circular workpiece up to 50mm)
APPLICATION• For wide variety welding measurement (Height of bead weld, Height of fillet weld, Throat thickness of fillet weld, Undercut depth, Beveling angle, Plate thickness and Root opening)
MATERIAL• Stainless steel (SUS420J2)
FEATURES• Measurement of thickness, width of bead welding and additional function for measurement of external diameter of circular work piece and swelling of pressure welding of reinforcing iron, etc.• Bead stride width: 53 mm• Beveling angle range (0-70°)• Function of undercut measurement is more accurate than previous items with the sharpness grinding of gauge head
117
10578
53
Vernier
BodyRotator
DIMENSION
Item No.
WGU-9M
Iron Diameter(mm)
Ø 19 ~ 35
Magni�cation
1/4, 1.0 ~ 1.6
Weight
190g
SPECIFICATIONS
Swelling length measuring
d
D=1.4d UP
D
MEASUREMENT FUNCTION
WGU-9MFront Back
L=1.1d UP
Swelling length measuring
L
dcore gap of pressured surface measuring
d
d UP= 14
www.sumipo
l.com
262
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
Gauges
Pin&Ring G
auge
Thread Plug &Thread Ring
Gauge
Tel. 0-2762-3000 www.sumipol.com
Welding Gauges
APPLICATION• For undercut depth and length measurement (Scale range: 0~2mm)
MATERIAL• Stainless steel (SUS410)
FEATURES• Easy to measure depth and length of undercut• Screw type of gauge head can be adjusted to zero-point.• 0 Adjustment : Press this gauge to the measuring sample. Turn the measuring piece to adjust 0 on the condition, which the three points are all straight on the sample.• Measurement : After 0 adjustment, put the measuring piece on the undercut, then the spring will be lifted and the graduation indicated is the depth of undercut
Item No.WGU-2S
Weight100g
SPECIFICATIONS
DIMENSION FIGUREScale for undercut length measurement
(linear measurement)
Gauge head
Long slotMeasurement base
(fixed type)
Measurement base(portable type)
Scale for undercut depthmeasurement
www.sumipo
l.com
263
Gauge
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
GaugesPin&
Ring Gauge
Thread Plug &Thread Ring
Gauge
Welding Gauges
Digital Welding Gauges
APPLICATION• Use for measuring the size of f illet weld and bead weld
MATERIAL• Stainless steel
FEATURES• Made of stainless steel which is easy for anti-rust coating• Beveling angle of 60°,70°,80° and 90°
APPLICATION• Use for measuring the size of f illet weld and bead weld
MATERIAL• Stainless steel
FEATURES• Easy to read with digital display• Beveling angle of 60°, 70°, 80° and 90°• Master gauge attached• Hold function available
DIMENSION FIGURE
Item No.Maximum Measurement Range of Fillet WeldMaximum Measurement Range of Bead WeldAccuracyMinimum ResolutionWeight
AWG-1011mm8mm±0.2mm0.1mm80g
Item No.Maximum Measurement Range of Fillet WeldMaximum Measurement Range of Bead WeldMinimum ResolutionAccuracy Repeat AccuracyMaximum Response SpeedWorking Temperature
APPLICATION• Use for measuring bevelling angle of T joint (interior angle), bevelling angle of facing joint (interior angle), leg length (height), and throat thickness of fillet weld
MATERIAL• SUS304
FEATURES• Indication of size limit for easy judgement (Angle step up by 2.5°, throat thickness step up by 1mm)• Provided with plastic case and ball chain
EXAMPLES OF USE
Ex.1 Bevelling angle (interior)of T joint
Ex.2 Bevelling angle (interior)of facing joint
SPECIFICATIONS
Ex.3 (Throat thickness)of f illet weld
Ex.4 Leg lengthof f illet weld
Material •Finishing
Item No.
Blank No.
Accuracy
Weight
92
SUS304 barrel semi-gross f inishing
Fillet weld • Reinforcement ±0.1mm angle ±1°
100g
1.5
Outline
Dimension
(mm)
Measurement
Value
Indication
Full Width
Full Height
Plate Thickness
Angle Degree (Both Sides)
Throat Thickness (Front)
Leg Length (Back)
WAL2542 WAL4562
1
46
25°
27.5°
4
5
2
45
30°
32.5°
5
7
3
44
35°
37.5°
6
8
4
43
40°
42.5°
7
10
1
43
45°
47.5°
8
11
2
44
50°
52.5°
9
13
3
45
55°
57.5°
10
14
4
46
60°
62.5°
11
15
92
SUS304 barrel semi-gross f inishing
Fillet weld • Reinforcement ±0.1mm angle ±1°
120g
1.5
WAL2542
Throat thickness
LegLength
Leg Length
WAL4562
www.sumipo
l.com
265
Gauge
Gauge
AirGauge
Pin&Ring G
auge
Thread Plug &Thread Ring
Gauge
FeelerGauges
TaperGauge
Gauges
Gauges
Root Limit Gauge
APPLICATION• Use for measuring root gap of T joint or facing joint, leg length (height) of fillet weld and excess weld, and height of facing joint
MATERIAL• SUS304
FEATURES• Measure with 1mm interval• The measurement result of root thickness will be indicated with the graduation scale• Provided with plastic case & ball chain
EXAMPLES OF USE
Ex.1 Root gap of T joint Ex.2 Reinforcement height offacing joint
Ex.3 Leg length (height) offillet weld
Ex.4 Root gap of facing joint
SPECIFICATIONSItem No.Blank No.
AccuracyWeight
OutlineDimension(mm)
90202
2020± 0.1mm60g
90202
2020± 0.1mm90g
MeasurementValueIndication
Full WidthFull HeightPlate Thickness
Root Gap (Front)Leg Length • Height (Back)Root Side (Front)Plate Thickness (Back)
WRL310 WRL11181 2 3 4 1 2 3 4
3 • 416 • 17
5 • 614 • 15
7 • 812 • 13
9 • 1010 • 11
11 • 128 • 9
13 • 146 • 7
15 • 164 • 5
17 • 182 • 3
WRL310WRL1118
4mm
3mm
3mm
2mm
16mm
17mm
17m
m
18mm
Material • Finishing SUS304 barrel semi-gross f inishingSUS304 barrel semi-gross f inishing
Welding GaugeFEATURES• Made of stainless steel which is solid and anti-rust• Compact size with a hanging case, so easy to carry• Can be used to measure undercut and the swelling after pressure welding• Bead striding width 53mm
APPLICATION• Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.MATERIAL• Body : Stainless steel (SUS420J2)MADE IN• Japan
EXAMPLE OF USAGE
TWGU-8M
TWGU-8MReverse side
TWGU-8MTWGU-7MTWGU-2STWG-1TWG-2TAWG-10TDWG-20
O
O
×
O
O
O
O
O
O
×
O
O
×
×
O
O
×
O
O
O
O
O
O
O
×
×
×
×
O
O
×
O
O
×
×
O
O
×
O
O
×
×
O
O
×
O
O
×
×
O
O
×
O
O
×
×
O
×
×
×
×
×
×
Height ofBead Weld
Height ofFillet Weld
Depth ofUndercut
BevelingAngle
PlateThickness
OpeningDiameter
Round BarThickness Root Face
Throat Thicknessof Fillet Weld
MeasurementPoint
Model
SPECIFICATIONS
±0.6
Throat Thickness of Fillet
Weld Measurement Accuracy (mm)
±2
Angle Measurement
Accuracy (°)Model
TWGU-8M 1
Piece Per
Pack
Weight
(g)
156
Welding GaugeFEATURES• Made of stainless steel which is solid and anti-rust• Compact size with a hanging case, so easy to carry• Can be used to measure undercut• Easy to read with the rotor graduations on the same surface
APPLICATION• Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.MATERIAL• Body : Stainless steel (SUS430)MADE IN• Japan
EXAMPLE OF USAGETWGU-7M
TWGU-7MReverse side SPECIFICATIONS
±0.6
Throat Thickness of Fillet
Weld Measurement Accuracy (mm)
2
Angle Measurement
Accuracy (°)Model
TWGU-7M 1
Piece Per
Pack
Weight
(g)
140
Welding GaugeFEATURES• High accuracy gauge specifically use for undercut• Made of stainless steel which is solid and anti-rust• Compact size with a hanging case, so easy to carry• Maximum measurement value : 2mm• Minimum measurement value : 0.2mm
APPLICATION• Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.
MATERIAL• Body : Stainless steel (SUS410)• Spring • Gauge head • Screw : SteelMADE IN• Japan
EXAMPLE OF USAGE
TWGU-2SUse for precision undercut measurement
(1 scale = 0.2mm)
SPECIFICATIONS
±0.1
Accuracy
(mm)
1
Piece Per
PackModel
TWGU-2S
Weight
(g)
90
www.sumipo
l.com
268
Gauge
AirGauge
FeelerGauges
TaperGauge
Gauges
Gauges
Pin&Ring G
auge
Thread Plug &Thread Ring
Gauge
Tel. 0-2762-3000 www.sumipol.com
Welding Gauge
TWG-1
TWG-1
Dimension measurement accuracy ±0.4mm
Dimension measurement accuracy ±0.2mm
Minimum reading value 0.1mm
SPECIFICATIONS
Model
TWG-1 ±0.4
Throat Thickness of Fillet Weld Measurement
Accuracy (mm)±0.4
Root Opening Measurement Accuracy (mm)
±0.7
AngleMeasurement
Accuracy (°)1
Piece Per
Pack100
Weight(g)
FEATURES• Made of stainless steel which is solid and anti-rust• Compact size with a hanging case, so easy to carry
APPLICATION• Measurement during welding process of general welding, construction, Shipbuilding, bridge construction, etc.
MADE IN• Japan
MATERIAL• Stainless steel (SUS410)
EXAMPLE OF USAGE
Welding Gauge
TWG-2
TWG-2SPECIFICATIONS
Model
TWG-2 ±0.2
Throat Thickness of FilletWeld Measurement
Accuracy (mm)±0.4
Root OpeningMeasurementAccuracy (mm)
±0.7
AngleMeasurement
Accuracy (°)1
PiecePer
Pack130
Weight(g)
FEATURES• High precision type model TWG-1• Made of stainless steel which is solid and anti-rust• Compact size with a hanging case, so easy to carry
APPLICATION• Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.
MADE IN• Japan
MATERIAL• Stainless steel (SUS410)
EXAMPLE OF USAGE
Welding Gauge
TAWG-10SPECIFICATIONS
ModelTAWG-10 ±0.2
Accuracy (mm)1
Piece Per Pack59
Weight (g)
FEATURES• Use to measure the size of bead weld • fillet throat thickness • groove angle• Compact size and light weight• Maximum measurement range of bead weld: 8mm• Maximum measuring range of fillet weld: 11mm• Minimum reading: 0.1mm• Beveling angle of: 60° • 70° • 80° • 90°
APPLICATION• Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.
MADE IN• China
MATERIAL• Stainless steel (SUS420J2)
EXAMPLE OF USAGE
Welding Gauge
TDWG-20 SPECIFICATIONSModel
TDWG-20
RepeatAccuracy (mm)
0.02
Accuracy
0 ~ 10mm (±0.03mm)/10 ~ 20mm (±0.05mm)
1
Piece PerPack
81
Weight(g)
FEATURES• Use to measure the size of bead weld • fillet throat thickness • groove angle• High accuracy digital gauge• Maximum measurement range of bead weld: 10mm• Maximum measuring range of fillet weld: 20mm• Minimum reading : 0.01mm• Beveling angle of: 60° • 70° • 80° • 90°
APPLICATION• Measurement during welding process of general welding, construction, shipbuilding, bridge construction, etc.
MADE IN• China
MATERIAL• Body : ABS resin (ABS)• Measurement face • Scale : Stainless steel (SUS420J2)
ACCESSORIES• Zero setting master right angle ruler 1 piece, SR44 button cell battery for testing 1 piece
FEATURES• Use for measuring R (radius) of edge of construction works• Integrated type of both concave and convex sectionsAPPLICATION• Use for measuring the radius of an object
FEATURES• Chamfering measurement can be easy, quick and accurate to improve work efficiency• Accuracy : ±0.03mmAPPLICATION• Use for chamfering inspection (45° chamfering)
FEATURES• Pitch of general screw can be measured easily and accurately• Accuracy : 0.25~1.3(±0.03mm) • 1.4~7.0 (±0.05mm) • 7.5~11.5(±0.07mm)
APPLICATION• Use for screw pitch
MADE IN• Japan
MATERIAL• Cold rolled steel coil (SPCC)
FEATURES• Pitch of the acme screw can be measured easily and accurately• Accuracy : 2~7mm(12 pitch~3 1/2)±0.03mm 8~16mm(3 pitch~1 1/3)±0.05mm 20mm(1 pitch)±0.05mm