GATE EE 2011 Q. No. 1 – 25 Carry One Mark Each MCQ 1.1 Roots of the algebraic equation x x x 1 0 3 2 + + + = are (A) ( , , ) j j 1 + + − (B) ( , , ) 1 1 1 + − + (C) (,,) 000 (D) ( , , ) j j 1 − + − MCQ 1.2 With K as a constant, the possible solution for the first order differential equation dx dy e x 3 = − is (A) e K 3 1 x 3 − + − (B) e K 3 1 x 3 − + (C) e K 3 1 x 3 − + − (D) e K 3 x − + − MCQ 1.3 The r.m.s value of the current () it in the circuit shown below is (A) A 2 1 (B) A 2 1 (C) 1 A (D) A 2 MCQ 1.4 The fourier series expansion () cos sin ft a a nt b nt n n n 0 1 ω ω = + + 3 = / of the periodic signal shown below will contain the following nonzero terms GATE/EE-2011 __________________________________________________________________________________________________________ EE : ELECTRICAL ENGINEERING Page 1 __________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]SCO - 18, 2nd Floor, Sector 26, Madhya Marg Chandigarh - 160019 Ph.: 0172-5026826 | Mob: +91-98723 86826, +91-94646 43471, +91-99158 31219
46
Embed
GATE EE 2011 - GATE GURUS€¦ · MCQ 1.5 A 4 point starter is used to start and control the speed of a (A) dc shunt motor with armature resistance control (B) dc shunt motor with
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
GATE EE2011
Q. No. 1 – 25 Carry One Mark Each
MCQ 1.1 Roots of the algebraic equation x x x 1 03 2+ + + = are(A) ( , , )j j1+ + −
(B) ( , , )1 1 1+ − +
(C) ( , , )0 0 0
(D) ( , , )j j1− + −
MCQ 1.2 With K as a constant, the possible solution for the first order differential equation
dxdy e x3= − is
(A) e K31 x3− +− (B) e K3
1 x3− +
(C) e K31 x3− +− (D) e K3 x− +−
MCQ 1.3 The r.m.s value of the current ( )i t in the circuit shown below is
(A) A21 (B) A
21
(C) 1 A (D) A2
MCQ 1.4 The fourier series expansion ( ) cos sinf t a a n t b n tnn
n01
ω ω= + +3
=/ of
the periodic signal shown below will contain the following nonzero terms
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
(A) a0 and , , , , ...b n 1 3 5n 3= (B) a0 and , , , , ...a n 1 2 3n 3=
(C) a an0 and , , , , ...b n 1 2 3n 3= (D) a0 and , , , ...a n 1 3 5n 3=
MCQ 1.5 A 4 point starter is used to start and control the speed of a(A) dc shunt motor with armature resistance control
(B) dc shunt motor with field weakening control
(C) dc series motor
(D) dc compound motor
MCQ 1.6 A three phase, salient pole synchronous motor is connected to an infinite bus. It is operated at no load a normal excitation. The field excitation of the motor is first reduced to zero and then increased in reverse direction gradually. Then the armature current.(A) Increases continuously
(B) First increases and then decreases steeply
(C) First decreases and then increases steeply
(D) Remains constant
MCQ 1.7 A nuclear power station of 500 MW capacity is located at 300 km away from a load center. Select the most suitable power evacuation transmission configuration among the following options
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
MCQ 1.8 The frequency response of a linear system ( )G jω is provided in the tubular form below
( )G jω 1.3 1.2 1.0 0.8 0.5 0.3
( )G j+ ω 130c− 140c− 150c− 160c− 180c− 200c−
Gain Margin and phase margin are
(A) 6 dB and 30c (B) 6 dB and 30c−
(C) 6 dB− and 30c (D) 6 dB− and 30c−
MCQ 1.9 The steady state error of a unity feedback linear system for a unit step input is 0.1. The steady state error of the same system, for a pulse input ( )r t having a magnitude of 10 and a duration of one second, as shown in the figure is
(A) 0 (B) 0.1
(C) 1 (D) 10
MCQ 1.10 Consider the following statement(1) The compensating coil of a low power factor wattmeter compensates the effect
of the impedance of the current coil.
(2) The compensating coil of a low power factor wattmeter compensates the effect of the impedance of the voltage coil circuit.
(A) (1) is true but (2) is false (B) (1) is false but (2) is true
(C) both (1) and (2) are true (D) both (1) and (2) are false
MCQ 1.11 A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency of 20 Hz. The resultant system of filters will function as(A) an all – pass filter (B) an all – stop filter
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
MCQ 1.13 A three phase current source inverter used for the speed control of an induction motor is to be realized using MOSFET switches as shown below. Switches S1 to S6 are identical switches.
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
MCQ 1.15 The voltage applied to a circuit is ( )cos t100 2 100π volts and the circuit draws a current of ( / )sin t10 2 100 4π π+ amperes. Taking the voltage as the reference phasor, the phasor representation of the current in amperes is(A) /10 2 4π− (B) /10 4π−
(C) /10 4π+ (D) /10 2 4π+
MCQ 1.16 In the circuit given below, the value of R required for the transfer of maximum power to the load having a resistance of 3 Ω is
(A) zero
(B) 3 Ω
(C) 6 Ω
(D) infinity
MCQ 1.17 Given two continuous time signals ( )x t e t= − and ( )y t e t2= − which exist for t 0> , the convolution ( ) ( ) ( )z t x t y t*= is(A) e et t2−− −
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
MCQ 1.18 A single phase air core transformer, fed from a rated sinusoidal supply, is operating at no load. The steady state magnetizing current drawn by the transformer from the supply will have the waveform
MCQ 1.19 A negative sequence relay is commonly used to protect(A) an alternator (B) an transformer
(C) a transmission line (D) a bus bar
MCQ 1.20 For enhancing the power transmission in along EHV transmission line, the most preferred method is to connect a(A) Series inductive compensator in the line
(B) Shunt inductive compensator at the receiving end
(C) Series capacitive compensator in the line
(D) Shunt capacitive compensator at the sending end
MCQ 1.21 An open loop system represented by the transfer function
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
MCQ 1.22 The bridge circuit shown in the figure below is used for the measurement of an unknown element ZX . The bridge circuit is best suited when ZX is a
(A) low resistance (B) high resistance
(C) low Q inductor (D) lossy capacitor
MCQ 1.23 A dual trace oscilloscope is set to operate in the ALTernate mode. The control input of the multiplexer used in the y -circuit is fed with a signal having a frequency equal to(A) the highest frequency that the multiplexer can operate properly
(B) twice the frequency of the time base (sweep) oscillator
(C) the frequency of the time base (sweep) oscillator
(D) haif the frequency of the time base (sweep) oscillator
MCQ 1.24 The output Y of the logic circuit given below is
(A) 1 (B) 0
(C) X (D) X
Q. No. 26 – 51 Carry Two Mark Each
MCQ 1.25 Circuit turn-off time of an SCR is defined as the time(A) taken by the SCR turn to be off
(B) required for the SCR current to become zero
(C) for which the SCR is reverse biased by the commutation circuit
(D) for which the SCR is reverse biased to reduce its current below the holding current
MCQ 1.26 Solution of the variables x1 and x2 for the following equations is to be obtained by employing the Newton-Raphson iterative method.
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
2 1− − =Assuming the initial values are .x 0 01 = and .x 1 02 = , the jacobian matrix is
(A) ..
100
0 80 6
−−> H (B)
100
010> H
(C) ..
010
0 80 6
−−> H (D)
1010
010−> H
MCQ 1.27 The function ( )f x x x x2 32 3= − − + has(A) a maxima at x 1= and minimum at x 5=
(B) a maxima at x 1= and minimum at x 5=−
(C) only maxima at x 1= and
(D) only a minimum at x 5=
MCQ 1.28 A lossy capacitor Cx , rated for operation at 5 kV, 50 Hz is represented by an equivalent circuit with an ideal capacitor Cp in parallel with a resistor Rp . The value Cp is found to be 0.102 μF and value of 1.25 MRp Ω= . Then the power loss and tan δ of the lossy capacitor operating at the rated voltage, respectively, are(A) 10 W and 0.0002 (B) 10 W and 0.0025
(C) 20 W and 0.025 (D) 20 W and 0.04
MCQ 1.29 Let the Laplace transform of a function ( )f t which exists for t 0> be ( )F s1 and the Laplace transform of its delayed version ( )f t τ− be ( )F s2 . Let * ( )F s1 be the complex
conjugate of ( )F s1 with the Laplace variable set s jσ ω= + . If ( )( )
( ) * ( )G s
F sF s F s
12
2 1= , then the inverse Laplace transform of ( )G s is(A) An ideal impulse ( )tδ
(B) An ideal delayed impulse ( )tδ τ−
(C) An ideal step function ( )u t
(D) An ideal delayed step function ( )u t τ−
MCQ 1.30 A zero mean random signal is uniformly distributed between limits a− and a+ and its mean square value is equal to its variance. Then the r.m.s value of the signal is
(A) a3
(B) a2
(C) a 2 (D) a 3
MCQ 1.31 A 220 V, DC shunt motor is operating at a speed of 1440 rpm. The armature resistance is .1 0 Ω and armature current is 10 A. of the excitation of the machine is reduced by 10%, the extra resistance to be put in the armature circuit to maintain the same speed and torque will be
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
MCQ 1.32 A load center of 120 MW derives power from two power stations connected by 220 kV transmission lines of 25 km and 75 km as shown in the figure below. The three generators ,G G1 2 and G3 are of 100 MW capacity each and have identical fuel cost characteristics. The minimum loss generation schedule for supplying the 120 MW load is
(A)
MW losses
MW
MW
P
P
P
80
20
20
1
2
3
= +==
(B)
MW
MW losses
MW
P
P
P
60
30
30
1
2
3
== +=
(C)
MW
MW
MW losses
P
P
P
40
40
40
1
2
3
=== +
(D)
MW losses
MW
MW
P
P
P
30
45
45
1
2
3
= +==
MCQ 1.33 The open loop transfer function ( )G s of a unity feedback control system is given as
( )G s ( )s s
K s
232
2=+
+b l
From the root locus, at can be inferred that when K tends to positive infinity,(A) Three roots with nearly equal real parts exist on the left half of the s -plane
(B) One real root is found on the right half of the s -plane
(C) The root loci cross the jω axis for a finite value of ; 0K K !
(D) Three real roots are found on the right half of the s -plane
MCQ 1.34 A portion of the main program to call a subroutine SUB in an 8085 environment is given below. hLXI D, DISPLP : CALL SUBLP+3 hIt is desired that control be returned to LP+DISP+3 when the RET instruction is executed in the subroutine. The set of instructions that precede the RET instruction in the subroutine are
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
MCQ 1.35 The transistor used in the circuit shown below has a β of 30 and ICBO is negligible
If the forward voltage drop of diode is 0.7 V, then the current through collector will be(A) 168 mA (B) 108 mA
(C) 20.54 mA (D) 5.36 mA
MCQ 1.36 A voltage commutated chopper circuit, operated at 500 Hz, is shown below.
If the maximum value of load current is 10 A, then the maximum current through the main ( )M and auxiliary ( )A thyristors will be(A) 12 Ai maxM = and 10 Ai maxA =
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
triangular matrix [ ]L and an upper triangular matrix [ ]U . The properly decomposed [ ]L and [ ]U matrices respectively are
(A) 14
01−> H and
10
12−> H (B)
24
01−> H and
10
11> H
(C) 14
01> H and
20
11−> H (D)
24
03−> H and
.10
1 51> H
MCQ 1.38 The two vectors [1,1,1] and [ , , ]a a1 2 where a j21
23= − +c m, are
(A) Orthonormal (B) Orthogonal
(C) Parallel (D) Collinear
MCQ 1.39 A three-phase 440 V, 6 pole, 50 Hz, squirrel cage induction motor is running at a slip of 5%. The speed of stator magnetic field to rotor magnetic field and speed of rotor with respect of stator magnetic field are(A) zero, 5 rpm− (B) zero, 955 rpm
(C) 1000 rpm, 5 rpm− (D) 1000 rpm, 955 rpm
MCQ 1.40 A capacitor is made with a polymeric dielectric having an rε of 2.26 and a dielectric breakdown strength of 50 kV/cm. The permittivity of free space is 8.85 pF/m. If the rectangular plates of the capacitor have a width of 20 cm and a length of 40 cm, then the maximum electric charge in the capacitor is(A) 2 μC (B) 4 μC
(C) 8 μC (D) 10 μC
MCQ 1.41 The response ( )h t of a linear time invariant system to an impulse ( )tδ , under initially relaxed condition is ( )h t e et t2= +− − . The response of this system for a unit step input ( )u t is(A) ( )u t e et t2+ +− −
(B) ( ) ( )e e u tt t2+− −
(C) ( . . ) ( )e e u t1 5 0 5t t2− −− −
(D) ( ) ( )e t e u tt t2δ +− −
MCQ 1.42 The direct axis and quadrature axis reactances of a salient pole alternator are 1.2 p.u and 1.0 p.u respectively. The armature resistance is negligible. If this alternator is delivering rated kVA at upf and at rated voltage then its power angle is(A) 30c (B) 45c
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
It the state Q QA B of the counter at the clock time tn is ‘10’ then the state Q QA B of the counter at t 3n + (after three clock cycles) will be(A) 00 (B) 01
(C) 10 (D) 11
MCQ 1.47 A clipper circuit is shown below.
Assuming forward voltage drops of the diodes to be 0.7 V, the input-output transfer characteristics of the circuit is
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
Statement for Linked Answer Questions: 54 & 55A solar energy installation utilize a three – phase bridge converter to feed energy into power system through a transformer of 400 V/400 V, as shown below.
The energy is collected in a bank of 400 V battery and is connected to converter through a large filter choke of resistance 10 Ω.
MCQ 1.54 The maximum current through the battery will be(A) 14 A (B) 40 A
(C) 80 A (D) 94 A
MCQ 1.55 The kVA rating of the input transformer is(A) 53.2 kVA (B) 46.0 kVA
(C) 22.6 kVA (D) 7.5 kVA
Q. No. 56 – 60 Carry One Mark Each
MCQ 1.56 There are two candidates P and Q in an election. During the campaign, 40% of the voters promised to vote for P , and rest for Q . However, on the day of election 15% of the voters went back on their promise to vote for P and instead voted for Q.25% of the voters went back on their promise to vote for Q and instead voted for P . Suppose, P lost by 2 votes, then what was the total number of voters?(A) 100 (B) 110
(C) 90 (D) 95
MCQ 1.57 Choose the most appropriate word from the options given below to complete the following sentence:It was her view that the country’s problems had been____by foreign technocrats, so that to invite them to come back would be counter-productive.(A) Identified (B) ascertained
(C) Texacerbated (D) Analysed
MCQ 1.58 Choose the work from the options given below that is most nearly opposite in meaning to the given word:Frequency(A) periodicity (B) rarity
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
MCQ 1.59 Choose the most appropriate word from the options given below to complete the following sentence: Under ethical guidelines recently adopted by the Indian Medical Association, human genes are to be manipulated only to correct diseases for which_____treatments are unsatisfactory.(A) Similar (B) Most
(C) Uncommon (D) Available
MCQ 1.60 The question below consists of a pair of related words followed by four paris of words. Select the pair that best expresses the relation in the original pair:Gladiator : Arena(A) dancer : state
(B) commuter : train
(C) teacher : classroom
(D) lawyer : courtroom
Q. No. 61 – 65 Carry Two Mark Each
MCQ 1.61 The fuel consumed by a motorcycle during a journey while traveling at various speeds is indicated in the graph below.
The distances covered during four laps of the journey are listed in the table below
Lap Distance (kilometers) Average speed(kilometers per hour)
P 15 15Q 75 45R 40 75S 10 10
From the given data, we can conclude that the fuel consumed per kilometer was least during the lap(A) P (B) Q
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
MCQ 1.62 Three friends, R , S and T shared toffee from a bowl. R took /1 3rd of the toffees, but returned four to the bowl. S took /1 4th of what was left but returned three toffees to the bowl. T took half of the remainder but returned two back into the bowl. If the bowl had 17 toffees left, how many toffees were originally there in the bowl?(A) 38 (B) 31
(C) 48 (D) 41
MCQ 1.63 Given that ( ) /f y y y= 6 @ and q is any non-zero real number, the value of ( ) ( )f q f q− − is(A) 0 (B) 1−
(C) 1 (D) 2
MCQ 1.64 The sum of n terms of the series 4+44+444+... is(A) (4/81) [ ]n10 9 1n 1 − −+ (B) (4/81) [ ]n10 9 1n 1 − −−
MCQ 1.65 The horse has played a little known but very important role in the filed of medicine. Horses were injected with toxins of diseases until their blood build up immunities. Then a serum was made from their blood. Serums to flight with diphtheria and tetanus were developed this way.It can be inferred from the passage that horses were(A) given immunity to diseases
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
• The given function ( )f t is an even function, therefore b 0n =
• ( )f t is a non zero average value function, so it will have a non-zero value of a0
a0 /( )
Tf t dt
21 /T
0
2=
^ h# (average value of ( )f t )
• an is zero for all even values of n and non zero for odd n
an ( ) ( ) ( )cosT f t n t d t2 T
0ω ω= #
So, fourier expansion of ( )f t will have a0 and an , , ,n 1 3 5f3=
Hence (D) is correct option.
SOL 1.5 The armature current of DC shunt motor
Ia RV E
a
b= −
at the time of starting, E 0b = . If the full supply voltage is applied to the motor, it will draw a large current due to low armature resistance.A variable resistance should be connected in series with the armature resistance to limit the starting current.A 4-point starter is used to start and control speed of a dc shut motor.Hence (A) is correct option
SOL 1.6 The Back emf will go to zero when field is reduced, so Current input will be increased. But when Field increases (though in reverse direction) the back emf will cause the current to reduce.Hence (B) is correct option.
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
SOL 1.8 Gain margin is simply equal to the gain at phase cross over frequency ( pω ). Phase cross over frequency is the frequency at which phase angle is equal to 180c− .
From the table we can see that ( )G j 180p c+ ω =− , at which gain is 0.5.
GM 20( )
logG j
1p
10 ω= e o
20 0.51 6log dB= =b l
Phase Margin is equal to 180c plus the phase angle gφ at the gain cross over frequency ( gω ). Gain cross over frequency is the frequency at which gain is unity.
From the table it is clear that ( )G j 1gω = , at which phase angle is 150c− PMφ 180 ( )G j gc + ω= + 180 150 30c= − =
Hence (A) is correct option.
SOL 1.9 We know that steady state error is given by
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
The first half of the circuit is a differential amplifier (negative feedback) Va ( )Vi=−Second op-amp has a positive feedback, so it acts as an schmitt trigger.Since Va Vi=− this is a non-inverting schmitt trigger.Threshold value
VTH 6 V212= =
VTL 6 V=−
Hence (D) is correct option.
SOL 1.13 Only option C allow bi direction power flow from source to the drive
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
For maximum power transfer Rth , should be minimum.
Rth RR
66 0= + =
R 0=Note: Since load resistance is constant so we choose a minimum value of Rth
Hence (A) is correct option.
SOL 1.17 ( )x t e t= −
Laplace transformation
( )X s s 11= +
( )y t e t2= −
( )Y s s 21= +
Convolution in time domain is equivalent to multiplication in frequency domain.
( )z t ( ) ( )x t y t)=
( )Z s ( ) ( )X s Y s s s11
21= = + +b bl l
by partial fraction and taking inverse laplace transformation, we get
( )Z s s s11
21= + − +
( )z t e et t2= −− −
Hence (A) is correct option.
SOL 1.18 An air-core transformer has linear B -H characteristics, which implies that magnetizing current characteristic will be perfectly sinusoidal.Hence (C) is correct option.
SOL 1.19 Negative phase sequence relay is used for the protection of alternators against unbalanced loading that may arise due to phase-to-phase faults.Hence (A) is correct option.
SOL 1.20 Steady state stability or power transfer capability
Pmax XE V
=
To improve steady state limit, reactance X should be reduced. The stability may be increased by using two parallel lines. Series capacitor can also be used to get a
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
and LX R R C2 4 1=Quality factor of inductance which is being measured
Q RL R CX
X1 1
ω ω= =
From above equation we can see that for measuring high values of Q we need a large value of resistance R4 which is not suitable. This bridge is used for measuring low Q coils.rNote: We can observe directly that this is a maxwell’s bridge which is suitable for low values of Q (i.e. Q 10< )Hence (C) is correct option.
SOL 1.23 In the alternate mode it switches between channel A and channel B, letting each
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
through for one cycle of horizontal sweep as shown in the figure.
Hence (C) is correct option.
SOL 1.24
Y X X5=
X X XX= +
XX X X= +
X X 1= + =
Hence (A) is correct option.
SOL 1.25 Once the SCR start conducting by an forward current, the gate has no control on it and the device can be brought back to the blocking state only by reducing the
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
forward current to a level below that of holding current. This process of turn-off is called commutation. This time is known as the circuit turn-off time of an SCR.Hence (C) is correct option.
SOL 1.26 f 1 .sinx x10 0 82 1= −
f 2 10 10 0.6cosx x x22
2 1= − −Jacobian matrix is given by
J cossin
sincos
xf
xf
xf
xf
x xx x
xx x
1010
1020 10
1
1
1
2
2
1
2
2
2 1
2 1
1
2 1
22
22
22
22= = −
R
T
SSSSS
>
V
X
WWWWW
H
for 0, 1x x1 2= =
J 100
010= > H
Hence (B) is correct option.
SOL 1.27 ( )f x x x2 32= − +
( )f xl x2 2 0= − =
x 1=
( )f xm 2=− ( )f xm is negative for x 1= , so the function has a maxima at x 1= .
Hence (C) is correct option.
SOL 1.28
Power loss .
( )0 WR
V1 25 105 10
2p
rated2
6
3 2
#
#= = =
For an parallel combination of resistance and capacitor
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
SOL 1.31 Initially Eb1 V I Ra a= − 220 1 10 210 V#= − =Now the flux is reduced by 10% keeping the torque to be constant, so the current will be
Ia 11φ Ia 22φ=
Ia2 I 1a
21 φφ= 0.92 1` φ φ=
10 . 11.110 91 A#= =
Eb N\ φ
& EE
b
b
1
2 0.9NN
1 1
2 2
φφ= = N N1 2=
Eb2 0.9 0.9 2 0E 1b1 #= = 189 V=
Now adding a series resistor R in the armature resistor, we have Eb2 ( )V I R Ra a2= − + 189 . ( )R220 11 11 1= − + R 1.79 Ω=
Hence (A) is correct option.
SOL 1.32 We know that loss PG
2\
loss length\
Distance of load from G1 is 25 km Distance of load from &G G2 3 is 75 km generally we supply load from nearest generator. So maximum of load should be supplied from G1. But &G G2 3 should be operated at same minimum generation.Hence (A) is correct option.
SOL 1.33
( )G s ( )s s
K s
232
2=+
+b l
Steps for plotting the root-locus(1) Root loci starts at 0, 0 2s s sand= = =−(2) n m> , therefore, number of branches of root locus b 3=(3) Angle of asymptotes is given by
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
so, a a1 2+ + 0= ,X X1 2 are orthogonalNote: We can see that ,X X1 2 are not orthonormal as their magnitude is 1!
Hence (B) is correct option.
SOL 1.39 The steady state speed of magnetic field
ns 1000 rpm6120 50#= =
Speed of rotor nr (1 )S ns= − .S 0 05=
nr 0.95 1000 950 rpm#= =
In the steady state both the rotor and stator magnetic fields rotate in synchronism , so the speed of rotor field with respect to stator field would be zero.Speed of rotor which respect to stator field n nr s= − 50 rpm950 1000= − =−None of the option matches the correct answer.
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
SOL 1.47 We can obtain three operating regions depending on whether the Zener and PN diodes are forward biased or reversed biased.1. 0.7v Vi #− , zener diode becomes forward biased and diode D will be off so the equivalent circuit looks like
The output vo 0.7 V=−2. When . .v0 7 5 7i1 #− , both zener and diode D will be off. The circuit is
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
Output follows input i.e v vo i=Note that zener goes in reverse breakdown(i.e acts as a constant battery) only when difference between its p-n junction voltages exceeds 10 V.3. When 5.7v V>i , the diode D will be forward biased and zener remains off, the equivalent circuit is
vo 5 0.7 5.7 V= + =Hence (C) is correct option.
SOL 1.48 vi 100 (100 )sin Vt2 π=Fundamental component of current ii1 10 (100 /3)sin t2 Aπ π= −Input power factor
pf cosII1( )
rms
rms1φ=
I ( )1 rms is rms values of fundamental component of current and Irms is the rms value of converter current.
pf /3 0.44cos10 5 2
102 2 2
π=+ +
=
Hence (C) is correct option.
SOL 1.49 Only the fundamental component of current contributes to the mean ac input power. The power due to the harmonic components of current is zero.So, Pin cosV Irms rms1 1φ=
100 10 /3cosπ#= 500 W=Hence (B) is correct option.
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
SOL 1.54 Output voltage of 3-phase bridge converter
V0 cosV3 3phπ α=
Maximum output
( )V max0 V3 3phπ= cos 1α =
3 33
400 2#
#π=
540.6 V=
Resistance of filter choke is 10 Ω, So
( )V max0 E IRchock= + .540 6 ( )I400 10= + I 14 A-
Hence A is correct option.
SOL 1.55
kVA rating V I3 3 400 6 14L L # # #π= =
7.5 kVA=Hence (D) is correct option.
SOL 1.56 Let us assume total voters are 100. Thus 40 voter (i.e. 40 %) promised to vote for P and 60 (rest 60 % ) promised to vote fore Q.Now, 15% changed from P to Q (15 % out of 40)
Changed voter from P to Q 40 610015
# =
Now Voter for P 40 6 34− =Also, 25% changed form toQ P (out of 60%)
Changed voter from Q to P 010025 6 15# =
Now Voter for P 34 15 49+ =Thus P P got 49 votes and Q got 51 votes, and P lost by 2 votes, which is given.
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
Therefore 100 voter is true value.Hence (A) is correct option.
SOL 1.57 The sentence implies that technocrats are counterproductive (negative). Only (C) can bring the same meaning.Hence (C) is correct option.
SOL 1.58 Periodicity is almost similar to frequency. Gradualness means something happening with time. Persistency is endurance. Rarity is opposite to frequency.Hence (B) is correct option.
SOL 1.59 Available is appropriate because manipulation of genes will be done when other treatments are not useful.Hence (D) is correct option.
SOL 1.60 A gladiator performs in an arena. Commutators use trains. Lawyers performs, but do not entertain like a gladiator. Similarly, teachers educate. Only dancers performs on a stage.Hence (A) is correct option.
SOL 1.61 Since fuel consumption/litre is asked and not total fuel consumed, only average speed is relevant. Maximum efficiency comes at 45 km/hr, So least fuel consumer per litre in lap Q Hence (B) is correct option.
SOL 1.62 Let total no of toffees be x . The following table shows the all calculations.
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]
__________________________________________________________________________________________________________ Visit us at www.gategurus.com | Email: [email protected]