Demanding applications such as gas turbine control require reliable operation in hazardous environments. Diakont’s industry-leading line of explosion-proof electric servo actuators are used to increase efficiency, safety, and reliability in the gas turbine industry for applications such as: • Inlet guide vane (IGV) control • Nozzle guide vane (NGV) control • Fuel valve control Diakont’s electric servo actuators provide exceptional service lifetime while requiring minimal maintenance. Diakont’s linear and rotary actuator configurations both use advanced roller screw technology which ensures an operation lifetime of 20 years or more. Also, Diakont’s robust actuators only require re- lubrication maintenance once every four years. Hydraulic systems have historically been used in the turbine control industry. However, hydraulic systems present issues of complexity, maintenance costs, and space challenges due to the need for auxiliary hydraulic components. Diakont’s electric servo actuators deliver a direct replacement for hydraulic systems and provide a more compact, more cost-effective, and safer solution. IGV/NGV Actuator Feedback Sensor Synchronous Motor Roller Screw Fuel Valve Fail-Safe Actuator Diakont electric servo actuators incorporate progressive technology, including precisely machined roller screws and high-force permanent magnet synchronous motors (PMSM). These components are integrated into a single unit, thus providing exceptional performance in a compact footprint. Diakont’s explosion-proof smart control unit provides the ability to control actuators with an analog or CAN interface and facilitates easy actuator integration, potential fault detection, and troubleshooting service. Gas Turbine Control Electric Servo Actuators High Performance Solutions Low Maintenance with a Long Service Life Hydraulic Replacement Compact Design Smart Control Unit North America 3853 Calle Fortunada San Diego, CA 92123 +1-858-551-5551 phone [email protected] Europe 2 Uchitelskaja St. St. Petersburg, Russia 195274 +7-812-324-6637 phone [email protected] Via Achille Grandi nc.10/12 52100 Arezzo, Italy +39-0575-250332 phone [email protected] 1. Most compact actuators of comparable performance in the turbine control industry 2. Low maintenance with a long service life 3. Ideal for replacing maintenance heavy/complex hydraulic systems 4. High durability in severe operating environments 5. Smart control unit for simple integration and troubleshooting