GANTREX Inc. / GANTREX CANADA Inc. www.Gantrex.com [email protected] Quality on Track ® A Member of the GANTRY GROUP Rail Load Measurement Services Current Problem: No simple system exists to measure forces exerted on crane rails Forces are currently only analyzed through theory Very difficult to accurately predict lateral and vertical forces hence support designs may be inadequate Gantrex Solution: A simple and economical solution to measure the forces generated by the crane operation Measurements of the lateral and vertical forces exerted on the rail Provides a Force Histogram graph of lateral forces for analysis, and pressure maping of vertical load (if required) Temporary Installation of Gantrex measuring device: • Fast and easy to install on site, usually 1-2 hours • that doesn’t require any handling of the rail while it is measuring Load measurements are obtained autonomously without operation interference, or personnel risk. Main Characteristics Based on the new RailLok ™ range. Measurement accuracy: +/- 5% Range of the lateral forces measured: from 0 to 300 kN Service currently available to measure the following rails: • A75, A100, A120, A150, MRS 87A, MRS 125, 104CR, 135CR, 175CR and 171CR, (other rails request) Measuring device is compact and low profile; Suitable for narrow beams and crane’s with guide rollers) Waterproof system Can work autonomously for 24 hours Track Expertise Track Geometry For more information, contact your local Gantrex representative