GAMMA ENERGI PRATAMA

[email protected]

www.gammaenergi.co.id

PT GAMMA ENERGI PRATAMA


021-2138-6448 0813-7909-9977

GAMMA ENERGI PRATAMAEngineering & Inspection Solution

GET


International CertifiedTRAINING

Vibration AnalysisInstalation & CommisioningCalibration

SERVICES

PRODUCT -Pumps Specialist-Vibration Analyzer & Online Monitoring-Laser Alignment-Balancing Machine-Level Measurement-Flow Measurement-Pressure and Temperature Measurement-Valves Specialist


[email protected]




021-2138-6448 0813-7909-9977


GET

1

ABOUT US

We are the first class of solution to perform project management and supplying either instrument, electrical, mechanical to all over clients in Indonesia. We cater clients with high competence, professional project management, comprehensive services that designed for our valued client with more efficient and reliable alternative solution.

Our company ultimate goal is to contribute to the best performance on project supply and maintenance services for oil & gas, power generation, pulp & paper and mining. We run our business by :

Vibration Sensor and Accessories, Level & Pressure Instrument, Valves, Vibration Calibrator, Conveyor Belt and Air Compressor.

such Vibration Analysis Service, Condition Precission Alignment, Field Balancing and Protection System Installation & Calibration.

These courses will be presented by practicioneer and in piping & mechanical engineering, maintenance & condition monitoring, electricalinstrumentand control engineering categories.

We value our customers with high distinction of appreciation and satisfaction.We take great pride in customer service in our top quality, unique and packages. We are careful to provide the customer with their exact requirements, on time delivery and continuity of care throughout our projects.

1. Supply High Quality Technology ;

2. Perform Comprehensive Engineering Service

3. Conduct and Deliver Engineering Course ;

ACTELECElectric actuators by BERNARD CONTROLS for direct mounting on quarter-turn valves ( actuator flange to ISO 5211) with a manual gearbox of the MR type series (actuator flange to ISO 5210). Power supply: single-phase AC, three - phase or direct current. Torque switch, travel stop and limit switch box as standard.For on/off or control duties. Integrated local control or remote control.

ApplicationAll applications in water engineering, energy engineering, and industry.

Design

DesignGate valve to DIN/EN with flanged or butt weld ends, pressure sea l design, body offorged or welded construction, non-rotating stem, split wedge with flexibly mounted discs for precise alignment with the body seats. Seat/disc interface made of wear and corrosion resistant 17 % chrome steel or Stellite.

ApplicationIndustrial plants, power stations, process engineering and shipbuilding. For water and steam. Other non-aggressive fluids such as gas or oil on request.

Design

Application

Double-acting pneumatic actuator for mounting on quarter -turn valves (butterfly valves or ball valves). Actuator flange to ISO 5211. Control pressure up to 8 bar. Mounts on valve stems with square end or flat end. Force transmission via scotch-yoke kinematics provides output torques of up to 8000 Nm which are ideal for actuating quarte - turn valves.

All applications in water engineering, energy engineering, and industry.

Ama-Drainer 80 / 100Design

Application

Vertical single-stage fully floodable submersible motor pump in close - coupled design, IP68, with or without level control, max. immersion depth: 10 m.

Automatic drainage of pits, shafts, yards and cellars at risk of flooding, lowering of surface water levels, drainage, drainage of underground passages, water extraction from rivers and reservoirs.

Design

Application

Waste water pump station with solids separation system. Indirect hydraulic transport of waste water, solids separators arranged upstream of the pumps, for maximum economic efficiency, operating reliability and ease of servicing.

Municipal and industrial waste water transport. Applications with special drainage requirements, e.g. hotels, hospitals, campgrounds, etc.

ABOUT USOUR PRODUCT

[email protected]




021-2138-6448 0813-7909-9977


GET

2

AKG-A/AKGS-A

ACTAIR

AmaDS³


Accelerometers and Piezo Velocity SensorsIndustrial Accelerometers

100 mV/g Standard Size Accelerometers

Ac102Multi-Purpose Accelerometer, Top Exit Connector / Cable, 100 mV/g

Ac146Small Side Exit Sensor with built-in integral stud, 100mV/g, +/- 10% sensitivity.

Negative Voltage Sensors

Ac1663 Wire Negative Voltage Accelerometer, side exit

Temperature Sensors

Temperature Measurement Sensors

Tc120Temperature Sensor; Top Exit; ° C Output

Tc124Temperature Sensor; Side Exit; ° C Output

Tk124Temperature Sensor; Side Exit; ° K Output

Hazardous Area Sensors & BarriersAccelerometer Class I Division 2 (ATEX Zone 2) Standard

Ac940Class 1 Division 2/Zone 2 Small Accelerometer, 100 mV/g, Top Exit 2 Pin Mini-MIL Connector

Accelerometer Class I Division 2 (ATEX Zone 2) Low Capacitance

Ta938Class 1, Division 2/Zone 2 Dual Output Sensor, Acceleration and Temperature, 100 mV/g, 10 mV/°C, 3 Pin Side Exit Connector With M8 Captive Bolt;

Ta931Class 1, Division 2/Zone 2 Dual Output Sensor, Acceleration and Temperature, 10 mV/g, 10 mV/°C, 3 Pin Top Exit Connector

[email protected]




021-2138-6448 0813-7909-9977


GET

3

Connection Technology Center, Inc. - CTC - offers the widest variety of high quality accelerometers,

vibration sensors cables and connectors for industrial use in condition monitoring and predictive maintenance applications. CTC produce various type cables, sensors, proximity probes, and junction boxes those compatibe and comply with many kind application and analyzer such Adash, CSI, Bentley Nevada, SKF, Comptest, DLI, Rockwell, etc.


Sensors/Transducers

FK Series

For monitoring of turbine/general-purpose rotating machinery

Used for measuring Shaft Vibration, Axial Position, Rotating Speed and Phase Mark

(Phase Reference) from small rotating machinery to large critical machinery such as turbines and compressors in plants

WK SeriesFor monitoring of general-purpose rotating machinery

Vibration/thrust conversion function incorporated into the conventional eddy - cur rent

transducer. The two wire power loop system for power and signal transmission achieves low cost vibration monitoring systems.

We have a full range of sensors/transducers with high environmental resistance and reliability to support various rotating machinery and measurement applications, allowing customers to chose the right one for the specific needs.

Condition MonitorsFrom large turbine generator protection to general-purpose rotating machinery monitoring, SHINKAWA offers monitors/systems to fit the size of your production assets. Our extensive selection of options allow for systems just right your needs.

VM-5 SeriesFor monitoring of turbines/general-purpose rotating machinery/low temp

A monitor used for monitoring Shaft Vibration, Axial Position, Eccentricity, Temperature,

Rotational Speed, etc. 8 and 10 slot rack mount types, Power source built - in standalone type are available for flexibility.

Analysis & Diagnostic SystemsOn-line analysis/diagnostic systems for rotating machinery are becoming more popular. We provide flexible, expandable systems based on our accumulated expertise as a leading monitoring system manufacturer.

infiSYS RV-200Vibration Analysis & Diagnostic System

infiSYS RV-200 is a machinery condition monitoring, analyzing, diagnosing system

which accurately acknowledges and feeds back the condition of rotating machinery

that plays a key role in production plants.

[email protected]




021-2138-6448 0813-7909-9977


GET

4


SHAFT ALIGNMENTLaser shaft alignment is the most efficient way of aligning machine shafts. Put simply, it saves time and money:increased machine availability, prolonged service life and maintenance intervals, lower power consumption!

ROTALIGN touchThe most powerful laser shaft alignment tool

SHAFTALIGN OS3Laser shaft alignment system for beginners with single-laser technology

tab@lignEasy shaft alignment check on your tablet or smartphone

VIBRATION ANALYSIS AND BALANCINGPrevent machinery failure and costly production downtimes! Our vibration measurement tools are used to check the condition of rotating equipment and detect early component wear and damage. Vibration analysis and balancing are integral parts of any condition-based and predictive maintenance programs.

VIBXPERT IIThe expert in data collection, vibration analysis and field balancing

VIBSCANNER 2The high-speed vibration data collector

Fluke 810On-site vibration analysis: at a glance

EDDY CURRENT TESTING

EDDYCHEK 610High-performance eddy current testing system for complex quality and process control tasks

EDDYCHEK 605 compactThe economic eddy current testing system for reliable quality and process control

EDDYSENSORSpecial sensor for basic detection problems

POWER MONITORINGThree-phase power monitoring detects changes in key electrical variables. Early screening of your assets helps identify the causes and reduce wear and damage.

Fluke 3540 FC Three-Phase Power MonitorDetects power fluctuations and prevents wear

The system for monitoring the electrical equipment can be used stationary and mobile

[email protected]




021-2138-6448 0813-7909-9977


GET

5


Adash Ltd. wants to offer tools and software for vibration diagnostics to all kind of customers according to their needs and budget. We want our customers to actively benefit from the features offered by our products instead of putting our tools into shelf.

Portable Vibration Devices

A4910 LUBRIVibration Meter, Analyzer and DataA4900 VIBRIO

Collector in OneMonitoring and Control of Lubrication Process+ Vibration Data Collector

A4400 Va4 PRO IIVa4 Pro II is a professional 4/4 channel signal analyzer built especially for vibration analyst who has the highest expectations of their equipment.

Online Monitoring Systems

A3900 II1 - Channel Online Monitoring SystemThe A3900 is a simple one channel online monitoring system. Measured value is displayed on the front panel and can be transferred to the control system through 4-20 mA current loop output. Green, yellow and red LEDs informs you about the machine/bearing vibration state. The A3900 unit includes one programmable output “ALARM” relay

A3800The A3800 is a compact size on-line monitoring and diagnostic system. Every factory has some critical machines on which the whole production rely on. Such a machinery should not be checked by portable devices on regular basis but they should be monitored continuously in order to know their “health” anytime. Information about vibration and related process values such as temperature, gives you and advantage of planned machinery repairs and decreases unexpected shut downs which are extremely expensive for your factory.

Software for Vibration DiagnosticsDDS SoftwarePowerfull Tool for Data Storing and Data EvaluationThe DDS (Digital Diagnostics System) software represents a powerful tool for storage and evaluation of vibration and technical diagnostics data. It allows the user to connect and work with data collected by portable data collectors and on-line monitoring systems. In the full configuration, it includes all the functions necessary for data transfer, analysis and data storage.

Others

Connect any vibration meter or analyzer to A4802 Sensor Simulator and check whether it measures correctly. The Sensor Simulator generates stable voltage signal on 80 Hz and 8 kHz. Setup your device to 100 mV/g input sensor sensitivity and you should see value of 10 mm/s in velocity measurement and 0.5 g in acceleration measurement.

A4802 SENSOR SIMULATOR

We offer wide range of acceleration sensors. Single axis sensors are available with most common 100 mV/g sensitivity and 10, 50, 500 mV/g sensitivity. Triaxial acceleration sensor compatible with VA3Pro, VA4Pro, VA5Pro and A4404 available too.

In order to measure for example Orbit measurements, we are able to supply proximity probes (eddy current probes) which measures displacement.

ACCESSORIESwide range of accessories needed for your vibration measurements

[email protected]




021-2138-6448 0813-7909-9977


GET

6


[email protected]




021-2138-6448 0813-7909-9977


GET

7

AT-2050 Accelerometer Test System

Our newest product in the Portable Vibration Calibrator lineup, the AT-2050 Accelerometer Test System is designed to provide precision calibration of velocity pickups, transmitters, IEPE accelerometers, piezoelectric accelerometers, both single-ended charge accelerometers and differential output charge accelerometers, piezo resistive (PR) accelerometers, and variable capacitance (VC) accelerometers. AT-2050 is the only calibrator capable of measuring these signals directly without external equipment or external charge signal converter. AT-2050 is a fully self contained, loop controlled, system with a vibration exciter and amplifier.

Producer of the world’s most advanced portable vibration calibrator capable of measuring sensitivity readings for voltage, IEPE, charge accelerometers, and transmitters without external equipment or add-on accessories. Perfect for your all of your testing and vibration monitoring needs.

The World’s Most Innovative Portable Calibrators

AT-2040 Portable Vibration CalibratorIntroducing the AT-2040 Portable Vibration Calibrator and Transducer Test Set, the industry’s highest quality next-generation portable vibration calibrator. We used customer input and technological breakthroughs to develop an industry-leading design with superior accuracy.

The AT-2040 features full-automatic test mode, sensor simulation, a built-in sensor signal conditioner, and custom sensors that can be configured to fit every need.

AT-2035 Accelerometer Calibrator

AT-2030AT-2040

AT-2035 is a premium portable vibration calibrator capable of creating PDF certifications for most common sensor types. AT-2035 is the ideal calibrator for operators needing quick and reliable accelerometer calibration, as well as system checkout. AT-2035 offers a mix of features taken from our standard portable calibration shaker, , and our executive-class portable vibration calibrator, .

AT-2030 Calibration ShakerFor customers interested in a portable calibration shaker table without sensor inputs, we offer the AT-2030.The AT-2030 portable calibration shaker table is designed for simple accelerometer and vibration transducer calibration without the need for advanced features.AT-2030 is a variable frequency, variable amplitude, battery operated portable shaker capable of calibrating accelerometers, transducers, and proximity probes. Applications are producing a known vibration signal in gs, mils, or ips for sensor, wiring, instrumentation, and system checkout in vibration condition monitoring applications.

AT-2050

AT-2040

AT-2035

AT-2030

Proximity Probe Calibration Kit

Proximity Probe Calibration KitUsed for Proximity Probe Calibration and Validation.

Includes the following:* Proximity Probe Arm Sizes:

6mm8mm10mm1/43/8

*Mounting Legs Sizes:1 ½?2?3?

Proximity Probe Mounting BarMicrometer with non-rotating spindleHigh Quality Large KnobsPanel AdapterMagnetic Adapter4041 Steel TargetCompatible with:

* AT-2030* AT-2035* AT-2040


Safeguard Your Machinery with SIL 2 Vibration MonitorsProtect your critical machinery and on-site personnel with SIL 2 rated vibration monitors from PCH Engineering.

Even a few hours’ downtime in critical machinery can mean a great loss in production and man hours – not to mention the cost of repairs and spare parts. Monitoring vibrations gives you early warning of any misalignments. This helps prevent machine

A vibration monitoring solution to fit every OEM customerAs an OEM customer, you can get a vibration monitor that is customised to your machine.

Our vibration monitors are used by a large number of machine manufacturers in the wind, cement, energy, food and chemical industries, each with their own particular requirements.

PCH 1072 Vibration Monitor (1-Channel)The PCH 1072 is the new generation of high quality low cost vibration monitors, which can be used in many rotating machine applications. The standard version is a 1 channels monitor with a frequency range from 0.7Hz to 1kHz. It offers user selectable filters and selection between acceleration, velocity or displacement.

PCH 1073 Vibration Monitor (1-Channel)The PCH 1073 is the new generation of high quality low cost vibration monitors, which can be used for surveillance of vibration levels in machinery and detecting unbalance and bearing faults

PCH 1420 Vibration Monitor (2-Channel)The PCH 1420 is a digital multipurpose monitor with 2 input channels for IEPE or 3-wire API678 accelerometers, configurable alarm levels, 4-20 mA outputs and delivered for DIN rail mounting or within an IP67 casing. This version comes in a ruggedized IP67 casing and replaces our well-known PCH 1008 Vibration Monitor

PCH 1420 Vibration Monitor (4-Channel)PCH 1420 operates with 2 simultaneously running frequency bands and 4 vibration input channels. This vibration monitor has a frequency range from 0.7 Hz to 11.5 kHz and will typically monitor the 10-1000 Hz area (ISO 10816-3), and the high-frequency area 2-10 kHz.

A PCH Vibration Monitor to Go with Your Proximity ProbesAll PCH Proximity Probe Monitors measure the dynamic vibrations as well as the GAP distance to target.

The SIL 2 vibration monitors from PCH support API 670 Eddy Current probes / Proximity probes for the monitoring of rotating shafts on turbines, rotary atomizers and general machinery equipped with sleeve bearings.

[email protected]




021-2138-6448 0813-7909-9977


GET

8


IRD® Balancing ProductsIRD® Balancing offers a complete range of Balancing Products. A wide range of features are available to cover all of the requirements of precision balancing, including comparison to established tolerances and printing a certificate to document the balancing results. Whether your needs call for balancing rotating equipment on site or on a balancing machine, IRD® Balancing can provide the solution.

295 Series Technical Data Sheet

Model 295 SeriesFor Use with Soft-Bearing Balancing MachinesEnhanced Operator Tools & ReportsEasy to Use Interface

IRD Balancing / Vibration Instruments

246 Technical Data Sheet

Model 246For Use with Soft-Bearing Balancing MachinesPortable Design for Use in On-Site Balancing Digital Readout

236 Technical Data Sheet

Model 236For use with Soft or Hard-Bearing MachinesCost-effective, high performance solution.Digital Readout

Vibration Meters

206 Vibration MeterSingle channel vibration meter with accelerometerPortable, simple to use meter for measuring overall vibration on rotating machineryFollows the 10 - 1,000 Hz overall RMS velocity range recommended by ISO 10816

258V Series II Vibration AnalyzerA single instrument for a range of service, maintenance & diagnostic

applications

258V Technical Data Sheet

Options: 1, 2, 3, or tri-axial channel sensors

Soft-Bearing Balancing Machines

Our soft bearing balancing machines offer a wide range of capabilities. The smallest machine has a balance sensitivity of 0.00002 oz-in (0.015 g-mm). Our largest machine has a capacity of 280,000 lbs (127,000 kg). Here at IRD®, we strive to provide what the customer needs, but we know there are always special cases. That's why we even sell parts like modular suspension work supports, roller work supports, and kits for user fabrication.

To measure machinery or structural vibration, a transducer is needed to convert the mechanical motion into an equivalent electrical signal. Each sensor has distinct advantages in certain situations and limitations in other, so it is important to select the most suited transducer or sensor for your job. Equally, important is selecting the appropriate parameter of vibration amplitude for measurement. IRD® has a wide range of transducers and accelerometers available to help you obtain accurate, reliable data, whether your concern is vibration monitoring, analysis, or dynamic balancing.

Sensors

[email protected]




021-2138-6448 0813-7909-9977


GET

9


KROHNE is a world-leading manufacturer and supplier of solutions in industrial process instrumentation.KROHNE offers supporting products and services for one-stop-shopping and in industries as widespread as oil & gas, water & wastewater, chemical & petrochemical, food & beverage, power, minerals & mining and marine.

FlowmetersComplete portfolio for volume flow, mass flow, density and concentration measurement

Level transmittersFor continuous level and interface measurement – contact and non-contact

Temperature assembliesWith measuring insert (RTD or TC)

Pressure transmittersFor absolute, gauge and differential pressure measurement

Analytical systemsComplete liquid analysis solutions with integrated sensor, transmitter and process connection

Wireless communicationFor remote data transmissionIndustrial wirelessKRL 70Radioline gateway for continuous data transfer

AccessoriesFor process instrumentation

OPTITEMP TT-CON EXTransmitter configuration kit for PC configuration of OPTITEMP transmitters

Archived productsArchive for discontinued products

VFC 070Vortex flow converter for combination with VFM 4000 flow

OPTISYS TUR 1050Optical turbidity measuring system for potable water applications

[email protected]




021-2138-6448 0813-7909-9977


GET

10


PRESSURE TEMPERATURETRX Temperature Transmitter EST120 temperature

& level monitoring transmitter

GRAIN MONITORING SYSTEM

HubLinkWIRELESS

BRD/BDV Series Diaphragm ValvePNERUMATIC PRODUCTS

EDX Speed MonitorSAFETY PRODUCTS

PB/PM Bargraph_Digital display Panel MeterDIGITAL METER

HUMY Continuous online moisture measuring system

FS700E/FS710E Dust monitoring for filter break

FineTek Quality Center Testing Laboratory is certified by National Taiwan Accreditation Foundation with Accreditation No. 3086 for flow meter testing, which is complied with ISO/IEC 17025: 2005 regulations, and being recognized by ilac-MRA.

Certifications:FineTek products adhere to international IEC standards and have received various approvals from international testing labs. Various products approved by UL (USA), ABS (USA), ATEX (PTB,Germany), GL(Germany), NEPSI (China), 3C(China), CE (Europe), CMC(China) etc.

SCX Tuning Fork Level Switch EAX Ultrasonic Level

POINT SWITCH LEVEL TRANSMITTERSFX Paddle Type Level Switch

FLOW MEASUREMENT

ECX Pressure Level Transmitter

[email protected]




021-2138-6448 0813-7909-9977


GET

11


CS-1000 is a Float Type Level Switch installing on the side of a tank and it is used for the process performing of alarm function when feeding and discharging of a tank with ON / OFF contact signal. It has an advantage of strong structure and long life cycle. It make mainly use of Petrochemistry plant

LEVEL > FLOAT > CS-1000

Thermal Flowmeters use a constant temperature differential (ÄT) technology to measure mass flow rate of air and gases. The thermal mass flow sensor consists of two Resistance Temperature Detectors (RTD’s).

FLOW > THERMAL > FT1

APPLICATION*Waste Water Treatment Plants (WWTP)*Aeration Air*Bio Gas*HVAC/Building Automation*Natural Gas and Air Applications*Boiler, Furnace, Oven manufactures etc

FLOW > THERMAL > FT2A-09I-SS-ST-E4-BO-G4

APPLICATION*Waste Water Treatment Plants (WWTP)*Aeration Air*Bio Gas*HVAC/Building Automation*Natural Gas and Air Applications*Boiler, Furnace, Oven manufactures etc.

FLOW > THERMAL > FT3

HAPT-Series is averaging pitot tube for flow measurement. Pitot tubes are normally used to measure flow velocities at a point. However, averaging pitot tubes are advantageous in that they can measure the average flow velocity in the entire pipe line to be measured instead of obtaining the flow velocity at a point. HAPT-Series have advantages such as lower pressure loss, longer life

FLOW > AVERAGINGPITOT TUBE (HITBAR) HAPT-2F

MicroTREK Guided Wave Radar Level Transmitter is designedfor continuous level measuring of conductive or non-conductiveliquids,pulps and solid

APPLICATION● Liquids,powders,granules with εr≥1.4● Medium with turblent surface,dense dust,vapour or

pressurized gas layers above the product surface● For all tank shapes,for narrow vessels● Heavy industrial applications

Guided microwave MicroTREKHBA-418-4

[email protected]




021-2138-6448 0813-7909-9977


GET

12


SCHUH TECHNOLOGY established in the year 1990 by a group of engineers with highly committed to provide Accuracy, Warranty and Quality instrumentation products and services, mainly pressure and temperature gauges. Since then, with sincere desire to be the best, we continues our successful strategy by collaborating with our Customers and Partners to develop high-

performance , safety and innovative range of products and services for most application.

[email protected]




021-2138-6448 0813-7909-9977


GET

13


Tel-Tru is a manufacturer of bimetal and digital industrial thermometers as well as other temperature instruments and related accessories. Our instruments are used in sanitary, industrial, OEM, HVAC, and food service applications and equipment worldwide.

Temperature Products

SANITARY BIMETAL DIGITAL RTDs TEMPERATURE TRANSMITTERS

CALIBRATORS THERMOWELLS

[email protected]




021-2138-6448 0813-7909-9977


GET

14

GAS ACTUATED VAPOR TENSION

Pressure Products

Pressure Gauges Sanitary Pressure Gauges Pressure Transmitters Accessories

Specialty Products Compost Thermometer Custom Dials Photo Developing

ThermometerMotorcycle and

ATV Accessories


VEGA is active in over 80 countries with its globe-spanning network of subsidiaries and distributors. The company and its products have all the necessary certificates and approvals for worldwide application. This applies to the technical safety as well as the quality of the products and services.

LEVEL

VEGAPULS C 11Wired radar sensor for continuous level measurementFor simple measuring tasks, IP66/IP68, Type 6P

VEGAPULS C 11 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations, rain overflow basins and level monitoring. In bulk solids the sensors are used in small bulk solids silos or open

VEGAPULS 64Radar sensor for continuous level measurement of liquidsAll-round radar instrument with 80 GHz – the frequency of the future

The VEGAPULS 64 is a sensor for continuous level measurement of liquids. With small tanks or in case of narrow space the small process fittings offer special advantages. The very good

signal focusing enables the use in vessels with many installations such as e.g. stirrers and heating spirals

SWITCHINGVEGAPOINT 23Compact capacitive limit switch with tube extensionFor the detection of water-based liquids

VEGAPOINT 23 is a limit switch with remote switching point for detection of water-based liquids. The optional universal connection for hygiene adapters ensures reduced installation effort and leaner stock keeping and perfectly meets the requirements for hygienic processes in the food, beverage and pharmaceutical industries. It can be used without adjustment in the application.

VEGASWING 61Vibrating level switch for liquidsFor liquids (density: > 0.5 ... 2.5 g/cm³) – compact version

The VEGASWING 61 is a universal level switch for use in all liquids. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. The instrument can be used as empty or full detector, as approved overfill protection, dry run protection or pump protection in vessels and pipelines. The VEGASWING 61 offers maximum reliability in a wide application range.

DENSITY

VEGABAR 81Pressure transmitter with chemical sealWith chemical seal, for high temperatures

The VEGABAR 81 is a pressure transmitter with chemical seal for pressure and level measurement. The chemical seal systems of VEGABAR 81 adapted to the process, ensure a reliable measurement even with highly corrosive and hot products.

SOLITRAC 31Radiometric sensor for continuous level measurementRod detector

The SOLITRAC 31 is a radiation-based sensor with PVT rod detector for continuous measurement of liquids and bulk solids. It is suitable for level measurement under extreme process conditions, with critical product features or in aggressive products.

VEGADIF 85Differential pressure measurement for all mediaWith metallic measuring diaphragm

The VEGADIF 85 is a universal differential pressure transmitter for measurement of liquids, gases and vapours. Typical application areas are level measurement in pressurized vessels as well as flow measurement in combination with effective pressure transmitters.

MINITRAC 31Radiometric sensor for density measurementPoint detector

The Minitrac 31 is a radiation-based sensor for non-contact density measurement of liquids and bulk solids. The Minitrac 31 determines the density in a non-contact fashion. It is mounted external to the pipeline or vessel walls.

[email protected]




021-2138-6448 0813-7909-9977


GET

15

INTERFACE


[email protected]




021-2138-6448 0813-7909-9977


GET

16

We are always ready to adopt the latest technology and various disciplines in order to advance and become a reliable and credible valves supplier in the industry.

Ball Valve #400, #600

Standard : #400, #600

Type : 1 PC-Body, 2 PC-Body

Body : Forged Brass / Chrome

Connection : Screw BSPT, Reduce Bore

Ball Valve Pneumatic

Standard : JIS 10K, PN 16, PN 40, ANSI 150, ANSI 300

Type : Single Acting & Double Acting

Body : Cast Iron, Cast Steel, WCB A216, SS304, SS316

Connection : Screw BSPT, Flange End

Y-Strainer Valve

Standard : #125, #200, #600, #800, 10K, 16K, PN16

Connection : Flange End

Body : Cast Iron, Cast Steel, WCB A216, SS304, SS316

Screen : Mesh 40, 60, 80, 100, 120

Gate Valve OS & Y

Standard : JIS 10K, PN16, PN40, ANSI 150,

ANSI300, ANSI 600

Body : CI, WCB, Cast Steel, SS304, SS316


Gate Valve Bolted Bonnet

Standard : #800, #1500, #2500

Body : A105, F11, F22, SS304, SS316

Type : OS & Y

Connection : NPT, SW, BW

Gate Valve #125 / #150

Body : Brass, Bronze

Disc : Brass, Bronze

Type : Non Rising stem

Connection : Screw BSPT

Double Door Check Valve

Standard : JIS 10K, PN16, PN40, ANSI 150, ANSI 300

Body : Cast Iron, WCB, SS304, SS316

Connection : Wafer Universal

Swing Check Valve

Standard : JIS10K, PN16, PN40, ANSI 150, ANSI 300

Body : Cast Iron, Cast Steel, WCB, SS304, SS316


Lift Check Valve

Standard : PN16, PN40

Body : Cast Iron, Cast Steel, WCB


Gasket, Bolt & Nut

Standard : PN16, PN40, ANSI 150, ANSI 300, JIS 10K

Body : Carbon Steel, WCB, SS304, SS316

Flexible Metal Hose

Standard : JIS 10K, PN16, PN40, #150, #300

Below : SS304, SS316

Type : Wire Brick

Connection : Flange End CI, SS304, BW

Air Vent Head

Standard : PN10, PN16

Body : Cast Iron

Type : Single/Double Port - Floating Ball



A. CONDITION MONITORING SERVICES Condition Based Monitoring (Predictive Maintenance, PdM) continually monitors the health of machinery and provide the ability to predict not only when machine will fail, but also why it fail. Condition Monitoring for maintenance services consists of the following steps: Data acquisition, Trending, Assessment of machine condition, Faults diagnostic, Root Cause Failure Analysis,Corrective action and performance improvements

Our condition monitoring services is measurement of various parameters related to the mechanical condition of the machinery such as vibration level, bearing temperature, lube-oil condition, operating parameters, performance, etc, which make it possible to determine whether the machinery is in good or bad condition. Complete PdM technologies are included vibration, oil analysis, motor analysis, Infra-Red Thermography, Balancing and Alignment.

B. NON - DESTRUCTIVE TESTING (NDT) SERVICES NDT exactly as the name implies – testing that is performed without destroying or impacting the integrity of the items tested. A diverse range of industries use NDT to detect defects and irregularities and assess safety in equipment and assets, and the growing need to utilise NDT is a result of companies looking to extend the life of equipment, plant facilities and other assets in addition to adhering to increased regulation.

Our tailored NDT solutions are second to none to satisfy each of our customer’s needs across a wide variety of industries including oil and gas, power generation, petrochemical, aerospace, defence, marine, rail, submarine, foundries and general engineering. We offer both conventional and advanced NDT methods to provide a complete examination of components, equipment and assets.

Ultrasonic Testing (UT)Magnetic Particle Inspection (MPI)Radiographic Testing Weld/Surface Inspection Borescope Inspection

OUR SERVICES

[email protected]




021-2138-6448 0813-7909-9977


GET

17


We understand that investing in training is not only an investment in an individual, but also in the company’s future. We have developed a broad range of courses from foundation to practitioner level and evolved to become the benchmark for excellence in training for the oil and gas industry.

The diverse selection of topics covered at the different levels, make our courses invaluable for everyone from graduate engineers and support staff, to senior engineers.

[email protected]




021-2138-6448 0813-7909-9977


GET

18

OUR TRAINING

Electrical, Instrumentation & ControlMechanical & Piping EngineeringPredictive Maintenance Operation & Maintenance.International Certification.



[email protected]




021-2138-6448 0813-7909-9977


GET

19

MAJOR CLIENT

PT. Gamma Energi Pratama clients are direct end users as well as indirect through EPCI contractors and heavy fabricators. Major clients are listed below for reference:

PT. GAMMA ENERGI PRATAMA

JL. Bintara Jaya Raya No. 02, Bintara Jaya Bekasi Barat, Bekasi – Jawa Barat, Indonesia 17136Phone : 021-21386448,Fax : 021-21386448Email : [email protected] : www.gammaenergi.co.id

COMPANY ADDRESS


GAMMA ENERGI PRATAMA

Documents