Quick User Guide Gaming Case
Quick User Guide
Gaming Case
Table of Contents
Thank you for purchasing a Rosewill Computer CasePlease read the instruction manual before using and retain it for your future reference.
1
• Product Overview
Disassembly ...................................................... 02
Accessory Box ................................................... 03
• Installation Guide
1. Open the Unit ................................................ 04
2. Install the Power Supply ................................ 05
3. Install Motherboard ........................................ 06
4. Install Add-on Card ........................................ 07
5. Install 3.5”/2.5” HDD/SDD ............................. 08
6. Care ............................................................... 09
7. Options .......................................................... 10
• Specifications Table ........................................... 12
Front I/O Cable Pinout ....................................... 13
Front I/O ............................................................. 13
2
Quick User GuidePRISM S500Gaming Case
Product Overview
Disassembly (components vary by country)
Cooling Fan
HDD Cage
SSDPlates
Side Panel
Cooling FanDust Filter
Front View Right Side View Rear View Left Side View
210 mm
477
mm
475 mm
SSD/HDDPlateGlass Panel
3
Quick User GuidePRISM S500Gaming Case
Accessory Box
Image Part Name Qty Function/Component
Screw-A (6-32 x 6mm) 5 PSU
Screw-B (6-32 x 5mm) 22Motherboard
3.5” HDD
Screw-C (M3 x 5mm) 20 2.5” SSD
Standoff 9Motherboard(Pre-Installed)
Nut Setter 1Standoff Installation
(Optional: Standoffs are Pre-Installed)
Cable Tie 10 Cable Management
Velcro Strap 4 Cable Management
Micro Fiber Towel 1 Tempered Glass Cleaning
4
Quick User GuidePRISM S500Gaming Case
Installation Guide1. Open the Unit1-1. Loosen the thumbscrews and take off panel R and L (Figure 1).
1
• Simply loosen screws to remove side panel
5
Quick User GuidePRISM S500Gaming Case
2
2. Install the Power Supply2-1. Set the power supply unit (PSU) at the top of the case and secure with Screw-A (Figure 2).
6
Quick User GuidePRISM S500Gaming Case
3. Install Motherboard3-1. Secure the motherboard down onto the pre-installed standoff with Screw-B (Figure 3).
3
7
Quick User GuidePRISM S500Gaming Case
4. Install Add-on Card4-1. Loosen the screws to open the cover panel/slot cover (Figure 4a).
4-2. Install the add-on card and secure with screws (Figure 4b).
4a
4b
8
Quick User GuidePRISM S500Gaming Case
5a
5d
5f 5g 5h
5e
5c
5-2. Secure the 3.5" drive onto the tray/plate with Screw-B (Figure 5d/5e).
5-3. Secure the 2.5” drive onto the tray with Screw-C (Figure 5f/5g/5h).
* If drive is installed on 5e or 5g, water cooling radiator cannot be added.
5-4. Put the tray/plate back onto the chassis and secure with screws.
5. Install 3.5”/2.5” HDD/SDD 5-1. Take out the 3.5”/2.5” HDD/SDD trays/plates from the chassis (Figure 5a/5b/5c).
5b
9
Quick User GuidePRISM S500Gaming Case
6a
6-2. Clean the dust filters on the bottom regularly to ensure adequate airflow (Figure 6b).
6. CareTo prevent damage, keep all panels closed and secured.
6-1. Put the side panels back in place and secure with thumbscrews (Figure 6a).
6b
10
Quick User GuidePRISM S500Gaming Case
7. Options7-1. LED Light Mode Press LED light button briefly: RGB 1 (steady-rainbow) > RGB 2 (flowing-rainbow) > RGB 3 > RGB 4 > RGB 5 (seven-
color-breath) > RGB 6 (seven-color-one-way-billboard) > (seven-color-two-way-billboard) > Red > Green > Blue > White > Yellow > Cyan > Pink
Press LED light button and hold for >1.5 seconds: LED light turns off.
7-2. Liquid Cooling Radiator Installation Installing water cooling radiator on the side: a. Unscrew to remove the drives plate (Figure 7a).
b. Secure the radiator with screws (Figure 7b).
7a
7b
11
Quick User GuidePRISM S500Gaming Case
d. Secure the radiator with screws and put the dust filter back (Figure 7d).
Installing water cooling radiator on the bottom: c. Remove the bottom dust filter (Figure 7c).
7c
7d
12
Quick User GuidePRISM S500Gaming Case
Specifications Table
Model
Model Name PRISM S500
Specifications
Type ATX Mid Tower
Color Black
Case Material Steel / Tempered Glass
With Power Supply No
Power Supply Mounted Top
Motherboard Compatibility E-ATX, ATX, Micro ATX
With Side Panel Window Yes / Tempered Glass Side Panel
Expansion
External 5.25" Drive Bays 0
Internal 3.5" Drive Bays 3 (0)
Internal 2.5" Drive Bays 2 (5)
Expansion Slots 7
Front Ports
Front Ports2 x USB 3.0HD Audio In/OutLED Light Control
Cooling System
120 mm Fans3 x Bottom RGB LED (Pre-Installed)2 x Side (Optional)1 x Rear RGB LED (Pre-Installed)
Physical Specifications
Dimensions 8.27” x 18.7” x 18.5” (W x H x D)
Weight 17.6 lbs
13
Quick User GuidePRISM S500Gaming Case
Front I/O Cable Pinout
Front I/O
USB 3.0 CONNECTOR HD Audio CONNECTOR
Mic.
HD Audio
USB 3.0
LED Switch
Power
Features
• Tempered Glass Side Panel• Pre-Installed 4 x 120mm RGB LED Fans• I/O Ports: 2 x USB 3.0, HD Audio In/Out, LED Light Control• Supports up to 2 x 120mm Fans / 240mm Water-Cooling Radiator on the side, 3 x 120mm Fans
/ 360mm Water-Cooler on the bottom, 1 x 120mm Fan at the rear• Supports up to 160mm tall CPU Cooler• Supports up to 440mm Graphics Card• Easy-Access Bottom Dust FilterNOTICE: Please make sure your motherboard is equipped with on-board USB 3.0 socket before purchasing
PRISM S500_A
Technical Support [email protected] 1-800-575-9885
----------------------------------------------------------------------------------Thank you for purchasing a quality Rosewill product.
Please register your product at www.rosewill.comfor complete warranty information and support for your product.