GA Series - Flowserve€¦ · GA Series Gear Pumps provide high efficiency, pu se free pumping even under the most challenging conditions . C- General Info UTIOfl OPERATION GA double-helical

GA Series Heavy-Duty Gear Pumps

For Smooth, Efficient Handling of Viscous Products

Piganne/ tobviiac

4('Ill' IY1111111

widol ■ used l)ocau.c of their depelidabilih.

effivienev and relati‘ 1,11‘. 1•114.

lIl-,elf-primiw , and wt'll over

wide rangc nf fluid ftniporalurrs and

mdre COMI11011 attlidS

hanifird are:

%sphalt and Crude Oil

Chemicals and Pharmaceuticals

Chocolate and Confectionery Products

- Fuel Oils and Greases

Molasses and Sugar liy-products

Lube Oils and Greases

Paints, Lacquers and Varnishes

Printing Inks and Dyes

1)ulp and Paper Liquors

Soaps and Detergents

Solvents ainl Walte Oils

Ingersoll-Dresser Pumps

Marine Service GAs are well-suited for en room service on 44,40„ticv

, .

where supplymgJl aitl cation is operation. Petrochemicals

ring, blending and i aiI viscous 34.1,.(1-'k6it as crude oil,

fiffrgatsgs and grease are petztOfiltargrothly and efficiently with double-helical design.

e. • s

'cal of

Process Industries GA pumps are ideally suited for transfer, loading and,), movement of liquids i_nti) ark throughout manufablin processes. Paints and plastic4 these -liquids.

Food Products Handling high-temperature,

ear-sensitive

'9ge4- fr --As are ideal applications for the smooth-running G fOitttp4dng oils, syrups and chocolate are exemplary positive-di'Spit food products.

OEM Applications Manufacturers typically employ GA pumps in filtration equipment, as lubrication uni for large mac

7ery and foam s GA's deptif4 .

'a plus for OEMs.

GA Series Gear Pumps provide high efficiency, pu se free pumping even under the most challenging conditions

C-

General Info UTIOfl

OPERATION

GA double-helical gear pumps utilize precision-machined herringbone gears for smooth, high-efficiency operation.

This family of heavy-duty pumps covers a wide spectrum of requirements:

• Pressures to 500 psi • Flows to 120 gpm • Temperatures to 650°F • Speeds to 1800 rpm • Viscosities to 10,000+ ssu

Shaft and gears are supported at both ends, virtually eliminating shaft deflection, even while accommodating heavy, highly viscous loads.

BENEFITS/ADVANTAGES Ingersoll-Dresser Pumps' GA models are designed and built to outperform industrial pumps of all types. In comparisons with lobe-type, three-screw, vane-type and others, the GA emerges superior:

I Easier to maintain: • Handles higher pressures and viscosities

without special modifications • Has only one seal to maintain • More tolerant of dirt and grit

I Less complex than other pumps: • Direct drive — no gear reduction • Able to run "dry" for short periods —

greater margin for error

I Pulse-free operation

I Lower overall cost

I Uncontested warranty

GA pumps are available nationwide from stock through local distributors.

ength. Loc

North Amerka Sales

East USA Phillipsburg, New Jersey Tel: 800.414.1454

908.859.7000 Fax: 908.859.7890

East Canada Cambridge, Ontario Tel: 519.740.9891 Fax: 519.740.2021

Gulf Coast USA Houston, Texas Tel: 800.414.9434

713.803.4400 Fax: 713.803.4499

Midwest USA Franklin Park, Illinois Tel: 800.414.9434

708.451.3990 Fax: 708.451.3909

West Canada Calgary, Alberta Tel: 403.259.2505 Fax: 403.259.2593

West USA Santa Fe Springs, California Tel: 800.464.0136

310.903.2688 Fax: 310.941.2228

Central and South America Sales

Area Management Houston, Texas Tel: 713.803.4400 Fax: 713.803.4497

Chile and Pen, Santiago Tel: 2.236.1455 Fax: 2.236.1414

Colombia Bogota Tel: 1.285.3547 Fax: 1.285.3845

Mexico Tlalnepantla Tel: 5.390.2517 Fax: 5.390.4031

Venezuela Caracas Tel: 02.239.0068 Fax: 02.239.9761

Europe, Middle East and Africa Sales

Area Management Gateshead, UK Tel: 91.487.5051 Fax: 91.491.5535

Algeria Algiers Tel: 2.56.21.38

2.56.18.34

Austria Brunn Tel: 2236/31530 Fax: 2236/34994

Egypt Cairo Tel: 2.417.30.15

2.417.30.16 2.291.92.38

Fax: 2.662.034

France Paris, France Tel: 1.41.16.21.21 Fax: 1.49.00.03.19

Germany Hamburg Tel: 40.69.689.0 Fax: 40.69.689.243

69.689.310

Iran Tehran Tel: 21.802.9567 Fax: 21.802.9840

Italy Tel: 362.612.433

362 .612 .438 Fax: 362.303.396

Lebanon Beirut Tel: 1.601.781 Fax: 1.601.782

Netherlands Hoofddorp Tel: 2503.40204 Fax: 2503.39702

Roma& Bucharest Tel: 1.638.2384 Fax: 1.312.8370

Russia Moscow Tel: 502.220.3047

502.290.3522 502.203.1715 502.203.0055

Fax: 095.220.3036 095.200.1284

Saudi Arabia Al-Khobar Tel: 3.895.2716

3.898.0028 Fax: 3.895.2716

Spain Madrid Tel: 4.370.995 Fax: 4.377.250

United Arab Emirates Dubai Tel: 4.370.995 Fax: 4.377.250

United Kingdom Croydon, UX Tel: 81.688.77.33 Fax: 81.680.18.07

Asia Pacific Sales

Singapore (covering Philippines, Malaysia, Brunei, Thailand, Indonesia, Vietnam, India & Bangladesh) Tel: 567.7811 Fax: 569.7800

PR China 8, Hong Kong Beijing Tel: 1.499.1859 Fax: 1.493.0969

Japan Tokyo Tel: 03.3732.6121 Fax: 03.3732.6126

Korea Seoul Tel: 02.277.2302 Fax: 02.277.2305

Taiwan Taipei Tel: 2.718.8121 Fax: 2.719.3281

2.718.4260

Parts, Servke & Repairs Sales

East USA Cleveland, Ohio Tel: 800.404.6454

216.642.1494 Fax: 216.642.5741

East Canada Cambridge, Ontario Tel: 519.740.9891 Fax: 519.740.2021

West USA Houston, Texas Tel: 800.694.1118

713.803.4400 Fax: 713.803.4499

West Canada Calgary, Alberta Tel: 403.259.2505 Fax: 403.259.2593

World Headquarters Liberty Corner, New Jersey

USA

Customer Servkes Moosic, Pennsylvania USA

Customer Service Locations Baton Rouge, Louisiana Brantford, Ontario Charlotte, North Carolina Chicago, Illinois Cleveland, Ohio Edmonton, Alberta Fairfield, New Jersey Gateshead, U.K. Greer, South Carolina

Houston, Texas Lakeland, Florida La Mirada, California Pittsburgh, Pennsylvania St. Louis, Missouri Scranton, Pennsylvania Singapore Vancouver, Washington Walpole, Massachusetts

Manufacturing Sites

Argentina Buenos Aires

Austria Brunn

Brazil Rio de Janeiro

Canada Brantford, Ontario

Colombia Mosquera, Cund

Entlkild Gateshead Newark

Fume Arnage Orleans

Germany Hamburg Berlin

Italy Desio Caserta

Spcin Arganda Coslada

USA Chesapeake, Virginia Hastings, Nebraska Huntington Park, California Memphis, Tennessee Phillipsburg, New Jersey Statesville, North Carolina Taneytown, Maryland

Ingersoll-Rand • Padfic • Worthington • Pleuger • Sdenco • Jeumont-Sdmeider Pumps

Representative

Information Center: 253 E. Washington Avenue Washington, NJ 07882

800.728.7867

Ingersoll-Dresser Pumps Nothing contained within this brochure is intended to extend any warranty or representation, expressed or implied, regarding the products described herein. Any such warranties or other terms or conditions of sale of products shall be in accordance with Ingersoll-Dresser Pumps standard terms and conditions of sale for such products, which are available upon request.

Form 75104 © 1995 Ingersoll-Dresser Pump Company Printed in USA

GA Features I ngersoll-Dresser Pumps

Needle Bearings for high performance operation to 500 psi (GAR Series only).

Mechanical Seal for leak-free operation over a wide range of service conditions.

CapScrews for quick and easy pump assembly and disassembly.

Filler Plates for proper sealing under all operating conditions, guar-anteeing casing integrity. . moroNeWma

6.11 1119041A01 11001114111PP1111101110140110111111010 1fill

ndang Features

1011: filfillMODIIIMIM mumilkomilum*Aagillpot„

Herringbone Gears are precision-cut for greater face area, strength and load-carrying capability.

WiffiriligliaMpmmormamm

NOMIDNOWNI" .. U.

immel

Ingersoll-Dresser Pumps

Our Gear Pump Program

Known by the Worthington brand name before becoming part of the Ingersoll-Dresser Pumps family, our gear pumps comprise three basic series, each designed to fill a specific requirement.

• GA Our standard series for flow rates to 120 gpm, pressures to 150 psi, and temperatures to 650°F. The GA Series also includes a modified design, designated the GAR Series, for pressures to 500 psi at flows to 28 gpm.

• GR Our high performance series for flow rates to 1,050 gpm, pressures to 500 psi, and viscosity to 1,000,000 ssu.

• Gearex Our extra heavy-duty series with external timing gears for pump-ing slurries, abrasive materials, and dry running for extended periods of time. For flow rates to 800 gpm, pressures to 300 psi, and viscosities to 1,000,000 ssu.

Form 75105

GA Performance

) ngersoll-Dresser Pum s

GA Quick Selection Charts

Capacity, YP

VISCOMM 100 ssu, 20 tentis okes (Examples No. 1 fuel oil; SAE 30 at 150

Pressure, psi

- 2001)

10 25 50 75 100 150 200 300

1 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm V4/900 1/4/900 'A /900 1/4/900 1/4 /900 V4/900 'h /900 Vz /900 1/1200

3 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm V4/1800 1/4/1800 1/4/1800 Vz /1800 '/2 /1800 Vz /1800 1/4/1800 1/1800 5/1800

5 model 2 GA 2 GA 2 GA 2 GA 2 GA 2 GA 2 GAR 2 GAR 2 GAR hp/rpm 1/4/1200 1/4/1200 1/4/1200 Vz /1200 1/2/1200 3A /12 00 1/1200 3/1800 5/1800

10 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 3 GAR hp/rpm Vz /1200 Vz /1200 3/4/1200 3/4/1200 1 1/z /1800 2/1800 2/1200 5/1800 7 1/2/1800

15 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 4 GAR hp/rpm 3/4/1800 1/4/1800 1/1800 1'/z /1800 2/1800 3/1800 3/1800 5/1800 10/1800

20 model 4 GA 4 GA 4 GA 4 GA 4 GA 4 GA 4 GAR 4 GAR 4 GAR hp/rpm 1/1800 Ph /1800 2/1800 2/1800 3/1800 5/1800 5/1800 7V2/1800 10/1800

30 model 5 GA 5 GA 5 GA 5 GA 5 GA 5 GA hp/rpm 2/1800 2/1800 3/1800 3/1800 5/1800 5/1800

40 model 5 GA 6 GA 6 GA 6 GA 6 GA 6 GA hp/rpm 2/1800 3/1800 5/1800 5/1800 5/1800 71/4/1800

50 model 6 GA 6 GA 6 GA 6 GA 6 GA hp/rpm 3/1800 3/1800 5/1800 5/1800 5/1800

60 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 3/1200 3/1200 5/1200 7 1/z/1200 7 1/2/1200

70 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 3/1200 3/1200 5/1200 10/1800 10/1800 For applications in this range, refer to

80 model 7 GA 7 GA 7 GA 7 GA 7 GA Ingersoll-Dresser Pumps' sales office or hp/rpm 5/1800 5/1800 7 Y2/1800 10/1800 10/1800 distributor.

90 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/1800 5/1800 71/4/1800 10/1800 10/1800

100 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/1800 5/1800 7V2/1800 10/1800 10/1800

C9IHNITY, gp

VISCOSITY: 400 Hu, 90 tentistoke Example: No, 4 fuel oil at 70

Pressure, psi

- 1001; SM 30 at 100 - 130'F)

10 25 50 75 100 150 200 300 500

1 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm 1/4/900 1/4/900 1/4/900 1/4/900 1/4/900 1/4/900 'h /900 '/2 /900 1/1200

3 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm 1/4/1200 1/4/1800 1/4/1800 1/z/1800 Vz/1800 3/4/1800 1/4/1800 1/1800 2/1800

5 model 2 GA 2 GA 2 GA 2 GA 2 GA 2 GA 2 GAR 2 GAR 2 GAR hp/rpm V4/1200 V3/1200 1/2 /1200 1/4/1200 3/4/1200 1/1200 1'/z/1200 2/1200 3/1200

10 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 3 GAR hp/rpm 1/4 /1200 1/2/1200 3/4/1200 1/1200 1/1200 1 1/2/1200 2/1200 3/1200 7V2/1800

15 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 3 GAR hp/rpm 3/4/1800 1/1800 1'h/1800 1 1/2/1800 2/1800 3/1800 3/1800 5/1800 71/4/1800

20 model 4 GA 4 GA 4 GA 4 GA 4 GA 4 GA 4 GAR 4 GAR 4 GAR hp/rpm 1/1800 Ph /1800 2/1800 2/1800 3/1800 5/1800 5/1800 7'/z/1800 10/1800

30 model 5 GA 5 GA 5 GA 5 GA 5 GA 5 GA hp/rpm 2/1800 2/1800 3/1800 5/1800 5/1800 7V2/1800

40 model 5 GA 6 GA 6 GA 6 GA 6 GA 6 GA hp/rpm 2/1800 3/1800 5/1800 5/1800 71/4/1800 7'/J1800

50 model 6 GA 6 GA 6 GA 6 GA 6 GA 6 GA hp/rpm 3/1800 3/1800 5/1800 5/1800 7 1/z/1800 7 1/z/1800

60 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/1200 5/1200 7 1/2/1200 71/4/1200 10/1200

70 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/1200 5/1200 7'01200 71/4 /1200 15/1800 For applications in this range, refer to

80 model 7 GA 7 GA 7 GA 7 GA 7 GA Ingersoll-Dresser Pumps' sales office or hp/rpm 7 1/2/1800 10/1800 10/1800 15/1800 15/1800 distributor.

90 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 71/4 /1800 10/1800 10/1800 15/1800 15/1800

100 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 7 1/2/1800 10/1800 10/1800 15/1800 15/1800

Comity, Ilisv

VISCOSITY: 1,000 ssu, 220 sentistokes (Exam e: Ile. S fuel oil

Pressure, psi

at 951; SAE 30 at BO - 1001)

10 25 50 75 100 150 200 300 500

1 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm '/4/900 1/4 /900 'h/900 1/4/900 1/4/900 Vz /900 1/4/900 'h /900 1/900

3 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm 1/4/1800 V4/1800 1/4/1800 Y2/1800 1/4 /1800 3/4/1800 1/1800 11/4/1800 2/1800

5 model 2 GA 2 GA 2 GA 2 GA 2 GA 2 GA 2 GAR 2 GAR 2 GAR hp/rpm 'A /1200 'h /1200 'h /1200 1/2 /1200 3/4/1200 1/1200 1'/z/1200 2/1200 3/1200

10 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 3 GAR hp/rpm 1/4/1200 3h /1200 1/1200 1/1200 1 1/2/1200 1'/z/1200 2/1200 3/1200 5/1200

15 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 3 GAR hp/rpm 1/1800 1/1800 1 1/z /1800 2/1800 3/1800 5/1800 5/1800 7'h/1800

20 model 4 GA 4 GA 4 GA 4 GA 4 GA 4 GA 4 GAR 4 GAR 4 GAR hp/rpm 1'/2/1800 2/1800 2/1800 3/1800 3/1800 5/1800 5/1800 7V2/1800 10/1800

30 model 5 GA 5 GA 5 GA 5 GA 5 GA 5 GA hp/rpm 3/1800 3/1800 5/1800 5/1800 5/1800 7'/2/1800

40 model 5 GA 6 GA 6 GA 6 GA 6 GA 6 GA hp/rpm 3/1800 5/1800 5/1800 7 1/2/1800 71/4/1800 10/1800

50 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/900 5/900 5/900 7 1/2/900 7 1/z /900

60 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/1200 7 1/2/1200 71/4/1200 10/1200 10/1200

70 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/1200 71/4/1200 7 1/2/1200 10/1200 10/1200 For applications in this range, refer to

80 model 7 GA 7 GA 7 GA 7 GA 7 GA Ingersoll-Dresser Pumps' sales office or hp/rpm 10/1800 10/1800 15/1800 15/1800 15/1800 distributor.

90 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 10/1800 10/1800 15/1800 15/1800 15/1800

100 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 10/1800 10/1800 15/1800 15/1800 15/1800

Caparity, (iPtIl

VISCOSITY: 5,000 sue, 1,100 tentistakes (Examples Ile. 5 feel oil at 601, Bunker

Pressure, psi

C at arr; SAE SO at SO - 100°F)

10 25 SO 75 100 150 200 300 500

1 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm 1/4/900 1/2/900 'A /900 V4/900 'A /900 'h/900 'h /900 ' A1900 1/900

3 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm 1/4/1200 V4/1200 'h/1200 1h/1200 1/4/1200 Vz /1200 3/4/1200 1/1200 1'/2/1200

5 model 2 GA 2 GA 2 GA 2 GA 2 GA 2 GA 2 GAR 2 GAR 1 GAR hp/rpm 1/z /1200 Vz /1200 3/4/1200 3/4/1200 3/4/1200 1/1200 1'/2/1200 2/1200 3/1200

10 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 3 GAR hp/rpm 1/1200 1'/z /1200 Ph /1200 Ph /1200 1'/2/1200 2/1200 3/1200 5/1200 5/1200

15 model 4 GA 4 GA 4 GA 4 GA 4 GA 4 GA 4 GAR 4 GAR 4 GAR hp/rpm Ph /1200 2/1200 2/1200 3/1200 3/1200 3/1200 3/1200 5/1200 7'h/1200

20 model 5 GA 5 GA 5 GA 5 GA 5 GA 5 GA hp/rpm 1'/1/900 2/900 2/900 3/900 3/900 5/900

30 model 6 GA 6 GA 6 GA 6 GA 6 GA 6 GA hp/rpm 5/1200 5/1200 5/1200 5/1200 71/4/1200 7'h/1200

40 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 7 1121900 7Vz /900 7 1/2/900 7 1/z /900 10/900

50 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 71/4 /900 71/2 /900 7 1/2 /900 7' /2/900 10/900

60 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 10/1200 10/1200 10/1200 15/1200 10/1200

70 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 10/1200 10/1200 10/1200 15/1200 15/1200 For applications in this range, refer to

80 model Ingersoll-Dresser Pumps' sales office or hp/rpm distributor.

90 model hp/rpm

100 model hp/rpm

Types GA, GAR in selecting rotary pumps, viscosity must be consid- selections for specific conditions listed at four representative vis-ered as well as capacity and head. These charts give rotary pump cosities. The selections have been made for 60-cycle ac motors.

AVAILABLE OPTIONS

Model Sizes

GA • • GAR

•

itto_l A4 ..iWIIPIPMIPIPMINOMPO

Standard Materials and Options

The GA Series is available in seven basic sizes with porting from 1/2" to 2". With many options available, it is easy to custom build a pump for a particular application. These options include:

Monobloc Close-Coupled (Option FT) The mounting end of the pump is changed to allow direct connection through a bracket to a standard C-face motor. No baseplate is required.

Pressure Relief Valve (Option U) This allows short-term emergency bypass to pro-tect the pump and system from over-pressurization in case of a downstream obstruction.

Mechanical Seal (Option M)

High Pressure Design (Option R) For pressures above 150 psi, this option includes needle bearings and a modified casing to allow pressures to 500 psi. (Sizes 1 - 4 only)

Carbon Sleeve Bushings (Option D) The carbon sleeve bushings are inherently self-lubricating to extend component life when handling low lubricity fluids.

Inboard Bearing (Option MI)

With a mechanical seal, the inboard bearing pre-vents shaft deflection when using a chain or belt drive arrangement.

High Temperature Design (Option Y) For fluids above 350°F, this option includes special gas-kets, bushings, packing and seals to allow tempera-tures to 650°F.(Packing version shown)

To ensure positive shaft sealing with a minimum of leakage. Field conver-sion of packed pumps to mechanical seals is easily accomplished as well.

MATERIALS OF CONSTRUCTION

Item GA Series GAR Series

Cast iron Cast iron Alloy iron Carbon steel Cast iron N/A All steel Graphited Teflon or synthetic fiber Carbon on cast iron faces, Buna N elastomers, all else steel

Cast iron Cast iron Nodular iron Carbon steel Cast iron Cast iron N/A Graphited Teflon or synthetic fiber Carbon on cast iron faces, Buna N rubber bellows, all else steel

Mounting bracket Casing Gears Shafts Stuffing Box Gland Wear Plates Relief Valve Assembly Packing

Mechanical Seal

Form 75106

GA Diagrams I Ingersoll-Dresser Pumps

SUCTION & DISCHARGE PIPE TAP

SUCTION & DISCHARGE PIPE TAPS

od dbc

x h HOLES

Type GA Rotary Pumps

Pump Size a b d I m a P u y z cannettionsize

1 GA 3.11 3.94 1.81 1.62 3.56 1.00 2.38 0.56 0.68 2.75 0.31 1.06 1/2NPT

2 GA 4.21 4.25 2.33 2.12 4.62 1.25 3.00 0.62 0.50 3.38 0.06 0.94 1/4 NPT

3 GA 4.31 5.50 2.88 2.75 5.69 1.50 3.88 0.75 1.06 3.25 0.44 1.69 1 NPT

4 GA 4.94 5.50 2.88 2.75 5.69 1.50 3.88 0.75 1.06 3.25 0.44 1.69 1 NPT

5 GA 5.88 6.00 3.55 3.25 7.06 2.12 4.75 0.87 0.88 4.25 0.12 1.62 1 1/2 NPT

6 GA 6.62 6.00 3.55 3.25 7.06 2.12 4.75 0.87 0.88 4.25 0.12 1.62 1'/2NPT

7 GA 4.75 10.06 4.62 3.88 8.81 2.12 6.12 0.87 4.25 2.81 3.50 5.00 2 NPT

Type GAFT Rotary Pumps

Flange

1 GAFT 3.50 0.56 0.561 2.50 2.75 7.88 2.19 0.81 1.81 1.19 4.874 4.19 1/2NPT ,

2 GAFT 4.50 0.66 0.624 2.50 3.38 9.31 2.62 1.00 2.38 1.25 4.874 4.19 5/4NPT

3 GAFT 5.58 1.00 0.749 2.50 3.25 9.88 3.00 1.38 2.75 1.38 4.874 4.19 1 NPT

4 GAFT 5.58 1.00 0.749 2.50 3.25 10.50 3.00 1.38 2.75 1.38 4.874 4.19 1 NPT

5 GAFT 6.94 1.20 0.874 3.00 4.25 11.88 3.00 - - 6.872 6.18 1 1/2NPT

6 GAFT 6.94 1.20 0.874 3.00 4.25 12.62 3.00 - - 6.872 6.18 1 1/2 NPT

7 GAFT 8.38 1.50 0.874 3.00 2.81 14.81 7.06 - - - 6.872 6.18 2 NPT

Form 75107

Worthington pumps or OEM services

DRESSER PUMP

Worthington: Industry's broadest selection of pumps for original

cc

equipment manufacturers. Dresser offers you the widest variety of Worthington centrifugal and rotary pumps, single-stage and multi-stage, to fill your precise needs without compromise.

Our application experts fully understand the capabilities of our pumps. With their background, they can select the correct model, size, materials, impeller trim, sealing, etc. to fit your needs efficiently. The broad range of models, sizes, materials, etc. make a perfect match. All are thoroughly engineered with state-of-the-art equipment and procedures. And, all are thoroughly field-proven in thousands of applications in every variety of industry. You have assurance that you will receive the correct pump for each application.

Manufacturing is performed to the highest standards of quality assurance.

With our large inventory of units and parts, and the ability to fine-tune our production, you can be assured we can serve your continu-ing and recurring delivery requirements to your satisfaction.

To further serve our OEM customers, our worldwide network of qualified distributors are also available to you. They, too, carry inventories of units and parts, and have the ability to establish special stocking and delivery programs according to your schedules.

Typical Applications OEM Industrial dishwashers Industrial laundry equipment Cooking oil filtration Package irrigation systems Lease automated custody transfer

(LACT) units Heat transfer equipment Air scrubber systems Water purification & filtration Reverse osmosis High pressure washdown packages Main & auxiliary oil circulation

packages Hospital & laboratory sterilization

systems Package boiler feed systems Packaged cooling tower systems Corn processing systems Polystyrene extrusion systems Portable oil scrubber systems Evaporator packages Steam cleaner systems

Photos— Upper Left Worthington pumps are designed utilizing the latest state-of-the-art engineering techniques that assure the utmost in product reliability. CAD (Computer Assisted Design), FEM (Finite Element Method) are but two of the tools that assist our engineers in their efforts to build efficiency and reliability into every product.

Left Center The Chesapeake plant maintains extensive inventories of complete units and parts to assure prompt delivery to customers and distributors.

Lower Left Chesapeake not only maintains a large inventory of parts, but also utilizes part of the plant as a 'quick' response center. This allows us to machine parts on an emergency basis to meet customers' requirements.

D-800 cast iron centrifuga . 1)

D-500

n

• Capacities to 1200 gpm • Heads to 650 ft. O 1 to 60 HP O ANSI liquid end • NEMA standard motors O Low NPSH inducer options

• Capacities to 800 gpm O Heads to 300 feet O Greater corrosion resistance O Single mechanical seals

Worthington D-800 pumps available in frame mounted (D-814) or in the close coupled (0-824) (horizontal, and vertical in-line D-834) configurations, offer you 19 sizes with capacities to 1500 gpm, heads to 400 feet, in sizes from 1" through 4". Applicable for pumping water and a variety of other fluids including solvents, light oils, non-corrosive chemicals, coolants and brine, the 0-800 is a line of cast iron, end suction pumps designed with a combination of features that ensure long-term reliability, high efficiency and ease of maintenance.

0-800's back pull-out design allows for easy maintenance by providing access to internal pump components, and its top centerline discharge arrangement eliminates air entrapment and bending moments on pump supports, and simplifies piping layout. Other 0-800 features include:

Capacities to 1500 gpm Heads to 400 feet Discharge sizes 1 to 4 inches

O Efficient closed impellers • Pre-set mechanical seal

Worthington 0-511/512 and 0-520 end-suction pumps represent a highly standardized line, engineered to meet a broad range of commercial and industrial services. Available in close-coupled or frame-mounted models with either threaded connections (C.I.) or flanged connections (316 S.S.), the pumps are designed for durability, efficiency and economy.

Closed-impeller design offers high efficiencies across a broad range covering 1/3 to 3 HP. Closed-iMpellers also eliminate the need for troublesome clearance adjustments.

Frame-mounted (D-510) and close-coupled (D-520) Sizes 1 to 1-1/2 inch Capacities to 175 gpm

- Heads to 110 feet Cast iron and stainless steel Centerline discharge — back pull-out design

C

DSS-800 rolled stainless c, D-1093194 dose-coup "1.04111111if

cc The cold rolled stainless steel used in the casing, impeller and stuffing box cover of the DSS-800 pump offer greater corrosion resistance, and is ideal for application for a wide range of process liquids. The stainless steel components are made of Cr Ni Mo which is more elastic than cast metal. The casing is approximately 7mm thick and is further compression-hardened during the deep drawing process.

Worthington 0-1093/94 pumps utilize the same casings, impellers and stuffing boxes as the Worthington 0-1091. The pump is a close-coupled design, requiring only as much as half the space as the frame-mounted counterpart. It features standard ductile or modular iron construction, assuring extended life in the most difficult applications. All 316 stainless steel construction is also available. Standard NEMA, motors, readily available from a variety of manufac-turers are standard. The close-coupled design requires no final coupling alignment and requires no bearing frame or coupling maintenance during operation.

C C GA/GR heavy duty rotary pumps

WD low flow, high head, multi-stage ring section pumps DP-900 non-metallic chemical pumps

Worthington DP-900 non-metallic pumps have been designed in full accordance with ANSI B73.1 specifications. They've been engineered and constructed to withstand corrosion from a wide range of liquids. They are hydraulically efficient, impact resistant and have excellent mechanical strength.

Most DP-900 major parts are constructed of our corrosion resistant reinforced epoxy resin materials.

• Capacities to 400 gpm • Heads to 450 feet • Meets ANSI B73.1 specs • Integral impeller/sleeve combination • Wide variety of sealing options

Specially developed for high-pressure, low-flow applications, Worthington's WD multi-stage ring-section pump optimizes hydraulic performance, conserves energy, minimizes the cost of the driver and reduces maintenance. A completely modular pump, it is quickly assembled from a varying number of identical stages - up to 16 as a practical limit - to closely match the requirements of each specific application.

Designed for low NPSH requirements, (lower still with its optional first-stage inducer), the WD reduces system costs by minimizing piping and suction tank requirements, and eliminating wasteful "pump and motor oversizing." The WD's design (it allows for flexible positioning of the suction

and discharge flanges independently of each other) and its compact size make it an excellent choice where space is limited and headroom at a premium, as in many OEM applications.

• Heads to 1600 feet • Capacities to 400 gpm • High efficiency • Up to 16 stages • Low NPSH - optional inducer • Alternate nozzle positions

Worthington's LR line offers you 29 horizontal sizes from 1-1/2" through 10". They provide a wider range of hydraulic coverage than other typical horizontal split-case pumps and end-suction designs. Split-case pumps minimize the effects of radial load by allowing the radial thrust to be shared equally by the bearings at each end of the shaft.

The Worthington split-case line is a single-stage, double-suction impeller design. Double-suction impellers offer two advantages: reduced NPSH requirements up to 30%, and balanced axial thrust for longer bearing life.

The model LLR, single-suction, two-stage designs are available in 1-1/2-4" sizes. They feature two single-suction impellers placed back-to-back to minimize axial thrust. Radial thrust is balanced through the use of opposed volutes. Impellers are firmly secured to the shaft by use of a key and nut.

• Capacities to 19,000 gpm • Heads to 1000 feet • Sizes 1-1/2 to 10 inches • Type LR - single-stage • Type LLR - two-stage • Closed double-suction impeller

Worthington GA/GR pumps are simple external gear designs with only two moving parts to ensure long life and ease of maintenance. They are capable of handling a variety of liquids and varied conditions of service.

Worthington GA/GR pumps feature double helical or herringbone gear teeth which provide maximum face area allowing better load-carrying ability, greater strength and minimum hydraulic shock.

The smaller-capacity rotaries are often incorporated as vital parts of larger machines or pumping units: oil burners, oil filtration systems, oil transfer assemblies, lube oil consoles, machine tools, laundry equipment, packaging machinery

(including hot-melt process), diesel engines, gear reducers, pressure spray outfits, hydraulic systems, and for lube, fuel or bilge pumping on smaller marine craft.

• Pressures to 500 p.s.i. • Capacities to 1100 gpm • GR sizes 1-1/2 to 6 inches • Smooth running herringbone gears • Temperatures to: GA 450 F; GR 500 F • GA - flange and frame-mounted,

belt-drive option • GR - direct drive

LR/LLR centrifugal horizontal split-case pumps

Your Local Contact Is:

ORESEP PUIVIP (IY-RESS-72)

Dresser Pump Division Dresser industries, Inc. 815 Live Oak Drive Chesapeake, VA 23320

2011-B1 790 TPC

Worldwide distribution assures availability of pumps, parts and service.

An extensive network of Dresser Pump sales offices and Worthington pump distributors, located in every major trading area, is your assurance that there is a Dresser Pump, Worthington representative near you for prompt, local service when you need it.

Worthington pump distributors are factory trained specialists in pumping equipment. They can offer you expert assistance on pump application, selection, installation, operation, and maintenance.

Local availability is another benefit of selecting and using Worthington pumps. Worthington distributors carry large inventories of pumps and parts. In most cases, immediate shipment can be assured. And service is always nearby for prompt reaction to your specific needs.

You can locate the Dresser Pump sales office or Worthington distributor in your area by consulting your local telephone directory.