G4 Control and Management Solution for Data- Centers and Computer Rooms.

G4

Control and Management Solution for Data-Centers and Computer Rooms

The G4

• Perfect “All Built In” solution for control, management and monitoring computer rooms and data-centers.

• An unique integrated solution that ensures full control of equipments, real time detection of faults and immediate notifications to users.

• Works on LAN/WAN network,

• Includes GSM modem

Features

• Accepts input from up to 5 temperature sensors.

• 8 inputs dry contacts.

• 4 outputs dry contacts.

• RS232 serial connection for power devices (UPS / rectifiers).

• Ethernet line interface 10/100 Base auto detect. Network protocols : TCP/IP, UDP/IP, HTTP, SNMP v2, DNS, PPP, SMTP, TELNET,MODBUS client .

• Internal cellular modem support GPRS/GSM – Dual or Quad band.

•Antenna and SIM card connection.

•

G4 main screen

AC Fail

Air Condition stop operationAir condition start operation

ShutdownServers

Motion detector

GPRS/SMS Control and Notification

Leak detectionand notification

High temperature

Smoke detector

Door / Window open

Alarm

Change your point of view

AC Recovered

Wake-upServers

SNMP trap

Server room

Control and monitor of IT equipments

• Reading and analysis information through SNMP of IT equipments like: servers, switches, printers, …

• Features analyzed: CPU load, virtual and physical memory used, used and free space capacity for all SNMP (RFC2790 ) supported equipments.

• Check Availability of equipment by ping requests.

• Automatic shutdown up to 32 servers in UPS AC failure or a critical event defined by user –for more than 32 need additional Gamatronic’s software called “PSM”.

• Wake up servers in the way of “WAKE ON LAN” - (Bios configuration) and wake with delay availability.

• SNMP trap to management centers use SNMP manager like: What‘s Up, HP Open View, CA.

• SNMP restriction to set/get by community and IP – G4 may use as a server/client SNMP.

IT monitoring screen

IT Monitoring - Configuration Screen

Monitoring power systems

• G4 performs real time verification of Gamatronic and other UPS’s and power systems manufacturers.

• immediate alarm notification such as:

AC fail, Low battery, on Battery… .

• G4 notifies and operates accordingly:

=> Shutdown server for prevent damage to IT equipments and data bases,

=>send SMS/EMAIL/SNMP trap to relevant users.

POWER + monitoring screen

POWER + monitoring screen

Dry contacts

• Work with relays that define the status to normally open/close

• G4 will detect every changes of these states and immediately notify users .

DRY IN:

• 8 dry contacts inputs to receive alarms from different sensors such as: Air conditions, doors, smoke detectors, fire detector ,flood and more.• Contacts can be enable/disable in certain hour during the day according to

user preferences.

DRY OUT:

• 4 dry contacts outputs for remote activation of different devices like:Back up air condition, lamp, alarm, gates and more.

• Contacts can be activated automatically in one of following cases:

1) status’ change of a certain dry contact IN.2) High temperature alarm.3) IT alarm.4) UPS alarm.

Dry contacts screens

Environment Temperature

• G4 can monitor up to 5 temperature measurements sensors (one is provided by default).

• All sensors can be configured with high/low limit ,description name and Hysteresis that prevent falsehood notifications when the sensor is in the limit between the normal and critical temperature.

Environment temperature – main screen

Control via SMS

• The G4 can send notifications up to 10 mobile phone numbers. These numbers may also have a full control on the unit.

• A “status” SMS command reply a short answer of Fail/OK on following parameters:IT monitoring, environment, dry contacts, UPS .

• All critical commands will require SMS password and a flag authorization in the WEB interface – near all phone number ,

• user can mark the number he wants to authorize full control option.

• User can choose to receive a status notification from G4 from time to time.

Critical commands example:

• Shutdown server, wake up server, change dry contact status (open, close, pulse), get the G4’s IP.

The Control via SMS

Additional features

• Hardware is not dependent to an external server. • Built- In AJAX based web interface - enables accessibility thru every remote

internet browser.

• Event group- user can define a group of events he wants and refer them to a particular phone target.

• Internal 256 event log available through web server or SNMP.

• GPRS communication: where the LAN/WAN network isn’t accessible.

• Can operates with the Gamatronic “PSM AC UNIVERSAL” software to increase the shutdown target to more than 32 devices.

• Can operates with Gamatronic “GEMSI software” for monitoring several G4 units and other UPS models.

GeMSi Software - Main screen

GeMSi main screen, shows real time status of all regions and sites, alarm counter and direct connection to alarmed unit.

Units in specific site, real time status & name, right click shows all information about the unit.

GeMSi Software

Thank you