Fx draw 3 A New Hope © 2008 Efofex Software
Mar 31, 2015
Fx draw 3
A New Hope© 2008 Efofex Software
Getting Started…
Open a word document On the top menu go to Insert and then
Object (you might need to use the down arrow to find Object)
Choose fxdraw3.document from the list of options.
If you get a grey box asking you a question just click ok.
You should see a screen like this:
© 2008 Efofex Software
© 2008 Efofex Software
The basics – left hand side
The pointy thing
lines
circles
boxes
text
Colouring in
Graphs, charts and grids
Galleries
© 2008 Efofex Software
The basics – top bar
Freehand
The tick
Moving and arranging things
Colours
The grid
GAD
(Geometrically aware drawing)
© 2008 Efofex Software
TURN GAD OFF NOW BEFORE YOU HURT YOURSELF!
This one is GAD – The evil one from the dark side
Click either the cross or the grid
BUT DO IT QUICKLY…
© 2008 Efofex Software
TURN GAD OFF NOW BEFORE YOU HURT YOURSELF!
This one is GAD – The evil one from the dark side
Click either the cross or the grid
BUT DO IT QUICKLY…
NOW! NOW! NOW!
© 2008 Efofex Software
The cross makes everything you draw “freehand”
The grid makes everything you draw go to the nearest dot
Try drawing some boxes.
Click on the rectangle once, then click and drag wherever you want to draw it
Try some freehand and then using the grid
© 2008 Efofex Software
You’re all in trouble and I’m giving you lines!!!
Try drawing some lines freehand and then with the grid on…
© 2008 Efofex Software
Galleries – the fun part!
© 2008 Efofex Software
This bit’s the gallery
© 2008 Efofex Software
Galleries - The BasicsGalleries are collections of pre-drawn figures that can be used in your diagrams.
There are hundreds of images where you have almost no work to do at all.
To access the galleries you push the Gallery Select button.
© 2008 Efofex Software
When you push this button you will see a collection of images (most likelyChance Processes).
Click on one of the images and it will be surrounded by a red square.
Click OK and you will be returned to the main drawing screen.
© 2008 Efofex Software
Move over into the drawing screen and drag out a rectangle.
The image you select will be drawn into the rectangular area you sketch out.
© 2008 Efofex Software
When you wish to use a different image, push the gallery select button again and select another image.
You can select from other galleries by pushing the arrow shown below...
Take some time to play around in the galleries
© 2008 Efofex Software
The Pointy thing
It points at stuff!!
Click on the pointy thing, then use it to select one of your objects
© 2008 Efofex Software
Changing shapes You can change objects by dragging out the
green markers, or move them when they are highlighted by dragging the whole damn thing around.
You can turn things around by using the top menus:
They’re a bit moody and only get turned on when an object is highlighted Try them out and see what they do
© 2008 Efofex Software
Now look on the left hand side:Most of the buttons on the toolbar on the left hand side have a little red triangle at the bottom right.
© 2008 Efofex Software
This triangle indicates that the button hides a flyout toolbar.
To access the other tools in a toolbar, click and hold the mouse button for half a second. A toolbar will fly out.
© 2008 Efofex Software
Move across and select a new tool - then release the mouse button
The main toolbar will now show the new tool.
The flyout toolbars contain logically grouped tools. Take a little bit of time to look at all of the tools available to you.
© 2008 Efofex Software
Try drawing some circles
They all work a little differently from each other.
© 2008 Efofex Software
Adding TextText Boxesp Look on the left hand tool bar for the button.
p The flyout bar looks like this
p Text can be added to your diagram using either of the text tools.
or
p The other ones are equation boxes so don’t go there!!
p The only difference between the two tools is that the second will use the current shading to place the text in a box rather than free floating.
© 2008 Efofex Software
Select the tool and mark a rectangular area in the drawing area.
You should be left with a flashing text cursor at the top left.
You can simply type at this position.
To finish text entry, click outside the text box.
The text you type will be wrapped to fit the rectangular region you sketched out.
p Now right-click on the text box – you will see the text box properties.p Here you can change the font, modify the text, change the justification and change
the width of the margin around the text in a box.
There are also two less obvious options.
For now, you want your text to be interpreted normally, not as an equation.
© 2008 Efofex Software
Try labelling some of your objects…
© 2008 Efofex Software
Enough’s enough…
bottoms up!!