FX ARMS No. 984846.40/00 FUME XTRACTION ARMS Improving your workspace The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs. Available in Standard, Antistatic and Chemical resistant versions. Fixed or flexible mounting on bench, wall or ceiling. High quality arms in 32, 50 and 75 mm diameters. Chemical resistant Standard Antistatic
12
Embed
FX ARMS - Miltech FX brochure.pdf · FX ARMS No. 984846.40/00 FUME XTRACTION ARMS Improving your workspace The widest range to provide the optimum tailor made solutions to your fume
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
FX
AR
MS
No. 984846.40/00
FUME XTRACTION ARMSImproving your workspace
The widest range to provide the optimum tailor made solutionsto your fume and gas extraction needs.
Available in Standard, Antistatic and Chemical resistant versions.
Fixed or flexible mounting on bench, wall or ceiling.
High quality arms in 32, 50 and 75 mm diameters.
Che
mic
al r
esis
tant
Sta
ndar
dA
ntis
tatic
Top of the line, in all areasThe Nederman FX range is a superior system for fume extraction. Adaptable atany work shop, school, chemical/medical/electronic industry and laboratory. Thewide range of different arms, hoods and brackets create an outstanding platformfor tailor made solutions.
FX Standard Arms50/75
The adjustable benchbracket provides a stablemounting without havingto drill or cut the bench.
FX 50 bench mounted, with flange hood.
Ceiling brackets areavailable in four
different lengths allpowder coated and
with a 100mm ductconnection. Pictured is
the 250 mm version.
Strong powder coatedwall bracket. Duct workor hose is connecteddirectly to the 100 mmarm swivel.
Bench, wall or ceiling mounted- the choice is yours
The different mounting options ensurethe best possible positioning of the
arm, and allow it to be moved a sidewhen not in use.
Flange Hood FX 50When placed against a flat surface
this hood design creates a veryeffective capture area.
Dome Hood FX 50This 350 mm transparent hoodis ideal for the capture of lightfumes from open vessels.
FX 75, wall mounted, with angle nozzle.
Metal Hood FX 50An ideal hood for use in hotor abrasive applications.Available with built-in light.
Flexible Angle Nozzle ESDSimple, ingenious yet very effective.-The flexible nozzle gives preciseextraction for detailed work.
FX ESD Arms50/75FX ESD-Conductive fume extractionMany electronic production and repair facilities are handling ESD sensitive components.They demand static safe equipment with grounding ability. To give maximum peace ofmind for both effective fume extraction and component safety a wide range of the FXarms are available fully certified to the highest ESD standard.
FX 50 ESD, bench mounted,with flexible angle nozzle.
Electrostaticdischarge (ESD)
“A transfer ofelectrostatic
charges between bodiesat different electrostatic potentials,
caused by direct contact or inducedby electrostatic fields”.
ESD ApprovalsThe Nederman FX ESDrange consists of fullycertified arms, hoods andbrackets. All designed forsafe grounding of electrostatic charges.
Precision damperThe airflow damperin the FX 50/75 armshas a unique twin materialconstruction to give rigiditycoupled with a precision seal.This gives very effective air control even atup to 3500 Pa pressure.
Angle Nozzle FX 50 ESDThe ideal nozzle whenextraction close to the fumeor dust source is needed.
FX 75 ESD, wall mounted, with metal hood.
Flange Hood FX 50 ESDWhen placed against a flat surfacethis hood design creates a veryeffective capture area.
FX 75 PP, bench mounted,with metal hood.
FX PP Arms 75
PP-Chemically resistantManufactured from durable polypropylene and with all inside componentsbeing stainless steel the FX PP arms are ideal for fume extraction in aggressiveenvironments where chemical resistance is needed.
Metal Hood FX 75 PPPowder coated durable aluminiumwith outside diameter 250 mm.
360 degree swivel functionA full 360° rotation is acheived with asmooth low frictionswivel joint. Thisgives optimummanouverabilityand coverage.
Designed for lifeThe arm joints are constructed to givemaximum strength, smoothoperation, positivecontrol with easydismantling forinternal cleaning.
Single hand adjustment forflexibility and controlThe tensioner is supportedby ball bearings to givea distributed eventension and smoothpositive control.
Flange Hood FX 75 PPWhen placed against a flat surfacethis hood design creates a veryeffective capture area.
FX 75 PP, wall mounted, with dome hood.
Angle Nozzle FX 75 PPThe ideal nozzle whenextraction close to the fumeor dust source is needed.
Fixed or flexible,bench or wallThe FX 32 arm caneither be mounteddirectly in the benchsurface or with optionalbrackets for wall andadjustable bench mounting. Thedesign of the internal support allows the armto operate in virtually any position.
It is there when you need it The FX 32 arm is versatile in all directions and stays inposition when adjusted. Able to rotate throughout 360° thesmooth swivel means the arm has maximum coveragewithout bending or twisting the hose connection. Theoperator can easily adjust or close the air flow by slidingthe integrated damper.
FX Standard Arm 32
Compact, effective and easy to useThe FX 32 arm is a 1m long flexible extraction arm supplied with damper and swivel.It is used in schools, laboratories, electronic/medical industries and beauty salonsthroughout the world. The compact size provide an effective and localized extractionwhere space is on a premium.
FX 32 standard withflange hood, mounted
in wall bracket.
Capture Hood FX 32Increases the capture ability andworks like a small fume cabinet.
Flange Hood FX 32Transparent hood designed to
concentrate the captureto the source.
Dome Hood FX 32 Captures light vapours
from open vessels.
ESD approved arm and hoodsThe FX 32 ESD range guarantees a safe fumeextraction in facilities where ESD sensitivecomponents or equipment are handled.
32 Arm ESD FX
Capture Hood FX 32 ESDPlaced on a flat surface this hoodcreates an effective capture area.
Dome Hood FX 32 ESDMade in conductive plastic and
ideal for the capture of light fumes.
FX 32 ESD, bench mounted.
ESD Protected Area (EPA)“An area in which ESD sensitive components
can be handled with acceptable risk of damage asa result of electrostatic discharge or fields, and in
which the operator is not exposed to additional risk”.
Pa
a
a
a
a
a
a
a
b
b
b
b
b
b
c
c
c
c
FX Arm Ø a b c Range Standard ESD PP Pressure drop(mm) (mm) (mm) (mm) (incl.nozzle)