
2/16

Description- Sel-supporting casing made o galvanised steel;

- Reduced height allows or easy installation into

ceiling voids;

- Side access or inspection and maintenance;

- Dierential pressure switches mounted on board (or

plug-n-play solution);

- Condensation drainage system, with side mounteddrain point to minimise height

Double Skin Sandwich Panels

- Steel panels thickness is 0.9mm/0.7mm (inner/

outer skins)

- Internal rockwool insulation thickness is 25mm.

Density is 60Kg/m3 - giving a low noise solution,

whilst optimising product weight

Exchanger

- Cross-low aluminium heat exchanger with a thermal

eiciency o up to 70%, has proven perormance asit is Eurovent certiied

Filters

- G4 class or exhaust air and resh air, but higher

ilter grades are available on request

Range

- 6 models rom 300m3/h (0.08 m3/s) up to

3600 m3/h (1.0 m3/s)

Available Configurations

Unit ormat:

Side-by-sidewithinternalby-passnoheater;

Integralpostheateroption;waterorelectric

Pre-heateroption(fittedexternally)

100% By-Pass via motorised Damper

The plate heat exchanger is complete with a bypass

damper which is itted with an actuator, giving a

100% by-pass capability - control is via our integrated

e3co Star control package.

Accessories available on request

Accessories or rost protection - Pre-Heater

ESFP round electric heater with electronic

regulation or duct mounting

Accessories or post-heating: HWLG temperate water coil (45/35 C) available

on request

Accessories or air iltration:

- F7 & F9 Optional ilter (media) is available on

request

Protective accessories:

ESWC Weather cowl c/w bird guard

ESWR External weather protective roo

1

Speciication

Application

High perormance sel regulating ventilation and energy recovery or oice and industrial applications

Thermalefficiencyupto70%(EN308),incompliancewithErP2009/125/ECdirective,usingaEuroventcertiied core.

Airfiltrationandtemperaturecontrolincluded.OndemandventilationisavailableviaPIRorCO2

sensors

Compact, plug n play units complete with integrated BMS communications (MODBUS) and touch screen HMI

Range

Available in 6 models, the e3co Star range covers low rates rom 300 to 3600 m3/h (0.08 to 1.00m3/s).e3co Star range is available in 3 variants:

e3ssential ERU with plate heat exchanger and ilters itted

e3

nhanced ERU with plate heat exchanger, ilters and post heater itted (water or electric)e3lite ERU with plate heat exchanger, ilters and post heater plus pre heater (electric)

A shining example of excellence


3/162

Speciication

Integrated Exchanger

Fans and Motors

Completewithdirectdrivencentrifugalfans;singleordoubleinletwithforwardcurvedimpellerblades

DirectdrivenviaEC(ElectronicallyCommutated)motorswithhigh-performance,thermalprotectionandbuilt in speed control. EC technology is an ecological solution guaranteeing low energy consumption and

better management and control o the operating point (air lows can be controlled rom 30 to 100 %)

ControlsUserfriendlyinterface-colourtouchscreen

Fastandeasycommissioning-savingtimeonsite

Pre-configuredcontrols.VariableAirVolume,ConstantAirVolumeandConstantPressureoptions

Plugandplaysolution

FullBMScapabilityasstandard,usinganopentableversionoftheMODBUSprotocol-easytointegrate

controls

Heat Exchanger

Cross-flowheatexchangercorewithaluminiumplatesisEUROVENTcertified

Efficiencyuptothan70%(EN308)undertypicaloperatingconditionsasstatedbelow:

Fresh air : -5C/90 % RH Return air 20C/50 % RH

Automaticdefrostfunctionisincludedtoprotecttheheatexchangercorefromtheriskoffreezing.

An optional electric pre-heater (rost heater) is also available as part o rost protection strategy

Filters

Filtersareincludedtoprovideprotectiontoothercomponents(ie,exchanger/fans)Mediaismountedwithinrunnersforeasyfitting/removal

Thee3coStar unit is equipped with G4 grade ilter media itted to the resh air intake and return air

intake. F7 & F9 grade ilter media can be itted i desired and are available as optional accessories

Benefits and Features

IntegratedventilationcontrolcanbeaccessedviaourHMI(displaypanel),whichusestouchscreen

technology, BMS communication uses a MODBUS protocol is via an RS485 port. Alternatively, the built-in

Ethernet port can be used.

100%bypassviaintegraldamperisfittedwithservomotorscontrolledautomaticallybyourbuilt-in

controls, which can provide FREE-COOLING and NIGHT-COOLING unctions

WidechoiceofairflowcontrolscenariosareavailabletooptimiseenergyconsumptionTemperatureprobesareincludedtomonitorsupplyair,exhaustairandexternaltemperature

Anintegratedde-icingsensorisincludedtoprotectthehotwatercoil(whereheaterisfitted)

Electric heaters are complete with a manual reset saety thermostat to protect the electric heater elements

Programmableschedulerfunctionisincludedtoallowuserstocustomisetheirownoperatingschedule

Weekly,dateperiodorsingledatescheduleoptionsareavailable.Externaltimercontrolisalsoavailable

Airpressureswitchesmonitorfiltersandprovideadirtyfilteralarmfunction

Pressureswitchesareusedwithinthecontrolofairflowsforeachfan,andprovidefanfailalarms,both

locally (on the HMI) and to the BMS

Installation

Side-by-Sideformat-designedtobecompact

Lowprofile-suitableformountinginceilingvoids

Indoororoutdoor(whenweatherroofandweathercowlsaccessoriesarefitted)


4/163

Applications

e3co Stare3co Star

OFFICES

Flkt Woods offer a highperformance product rangecovering all key elements of

the overall ventilation system.Our products are designedto secure the best overallperformance of the system as awhole, considering parameters

such as health and air quality,energy efficiency, noise, firesafety and ease of installation.

EDUCATION

High occupancy levelsduring teaching periodsrequire energy-efficient andcontrollable demand-based

management of air quality andtemperature. The comfort,health and alertness ofstaff and pupils is ensured

during the learning process,but operating costs can beminimised when these facilitiesare unoccupied.

GYMNASIUM/INDOOR SPORTS

Differing types of activityand occupancy mean abroad spectrum of functionalrequirements to ensure efficientremoval of used air and the

introduction of fresh supplies.

Systems need to contain andcontrol the periodic build upof high humidity levels andtemperature.

HEALTHCARE

For a hospital to operate atits maximum potential, it has tohave all systems workingat the optimum. This not

only applies to staff,communications and lifesupport systems, but alsoto pipework, cleaning andventilation systems.

RETAIL/SHOPPING AREAS

With high activity levelsduring the working week andweekends, its important to

make sure that all areas ofventilation are maintained andFlkt Woods has the systemsto achieve all requirements.

APARTMENTS

The purpose of ventilation is toprovide clean good quality airby removing the stale, pollutedair from our homes. The maintask is of course to ensure that

the indoor air is healthy and

safe to breathe. Ventilationtoday is also about energy andsaving energy costs by addingheat recovery to the ventilation

system.

INDUSTRY

Flkt Woods technologyis used widely in industrialprocessing plants and factoriesfor ventilation of work spaces,as vital components in high

tech manufacturing facilities,

and for maintaining delicateenvironments within hightolerance levels inpetrochemical andpharmaceutical plants.

A shining example

of excellence


5/164

Legislation

Environmental Assessment SchemesIt is now very common for new build projects to be designed to achieve environmental standards such

as those set out in LEED and BREEAM programs. Flkt Woods, with its market leading knowledge and

products in energy recovery, has helped many projects achieve the very highest levels in both of these

schemes.

Energy Performance of Buildings Directive (EPBD)

TheCommissionoftheEuropeanUnionhasrecentlyproposedarevisionoftheEPBD(EnergyPerformance

in Buildings Directive, 2002/91/EC). The objective is to further strengthen the effectiveness and impact

of the existing Directive.

The background to this initiative is to optimise energy usage. It was noted that even in member states

where the existing Directive has been successfully implemented, the Commission still identified an untapped

potential for improvements that could further reduce the energy consumption and CO2

emissions from

buildings.

Building Regulations - Part L for New (A) and Existing Buildings (B)BuildingRegulationsPartLandFoutlinetheneedforahealthierworking/indoorenvironment,withthe

aim of decreasing CO2

emissions. The eco design of our e3co Star range will allow specifiers to create

designs which incorporate the necessary energy usage reductions, whilst still providing precise control of

mechanical ventilation.

European Energy Related Products Directive (ErP)

Directive2009/125/ECwasintroducedbytheEuropeanParliamentin2009withtheaimtoset

requirements for energy-related products being placed on the European Market. The intention is to

contribute to sustainable development by increasing the energy efficiency of those products having

significant environmental impact.

As a result, a series of implementing measures have been introduced and Regulation (EU) No 327/2011

applies to fans driven by electric motors with an electrical input power of between 125 W and 500 kW.

The fans installed in the e3co Star product benefit from EC technology and exceed the requirements of this

regulation.

Further measures relating more generally to domestic ventilation and non-domestic ventilation are yet tobe implemented. This will also have an impact on heat recovery units. The overall performance of the

e3co Star product has been developed with this in mind. In addition, at the heart of the product, its heat

exchanger is Eurovent certified, which provides reassurance that it will deliver performance that has been

independently confirmed.

LEGISLATION

In Europe, all countries now have to design their new buildings to meet energy targets that

are set out in the Energy Performance in Buildings Directive (EPBD). All Flkt Woods Energy

Performance of Buildings Directive solutions are designed to enable full compliance with this

and other directives regarding ventilation and air conditioning.

Being a global manufacturer and supplier makes meeting legislation easier for Flkt Woods. It means that

Flkt Woods must produce solutions at standards that equal the most stringent legislation and guidelines

around. Only by doing this can we ensure that we meet relevant standards within every market.


6/165

Performance-CompositeCurves

Size 1 Size 2 Size 3 Size 4 Size 5 Size 6

Fan DataMaxInstalledPower:Wattsinput 175 x2 171 x2 465 x2 450 x2 750 x2 1000 x2

Nominal Running speed: rpm 2150 1740 1640 1085 1030 880

Fan Motor FLC: amps (note 1) 1.3 x 2 1.3 x 2 3.0 x 2 2.8 x 2 3.4 x 2 1.7 x 2

FanMotorIPrating 44 44 54 54 54 54

Motor Insulation class B B B B B B

Unit Data

Max Running temperature: C +40 +40 +40 +40 +40 +40

Min Running temperature: C (note 2) -10 -10 -10 -10 -10 -10

ElectricalSupply:V/Ph/Hz(note3) 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 415/3/50

ElectricalSupply:V/Ph/Hz(note4) 230/1/50 415/3/50 415/3/50 415/3/50 415/3/50 415/3/50

Thermal Recovery Perormance

RecoveredThermalPower:kW(note5) 2.5 3.6 6.1 7.1 11.0 16.0

Air o temperature: C 9.9 10.0 8.2 8.3 9.3 9.4

Condensate rate: l/h 0.5 0.8 0.9 1.1 2.1 3.1

Filters

Supply / Exhaust Air Filter class (note 6) G4 G4 G4 G4 G4 G4

Note 1: Starting currents are the same as ull load currents as EC motors have a sot start unction

Note 2: BasedonPre-Heaterbeingfitted,theminimuminlettemperatureis-5C

Note 3: Electrical supply when no electric heater is itted ie, e3ssential variant

Note 4: Electrical supply when integral electric heater is itted ie, e3

nhanced and e3

lite variantsNote 5: Data relates to nominal airlow rates, which are a mid-curve duty point. Thermal recovery data is based on the ollowing conditions:

External air: -5C @ 90%RH ; Return air: 20C @ 50%RH ; Nominal airlow as deined above

Note 6: F7 and F9 grade ilter media is available as an optional extra. The extra pressure drop, when F7 grade ilter media is itted is approx 40Pa


7/166

Technical Details

ESFP: Electric Pre-Heater Data (Frost Protection)

Note 7: NominalPowerbasedonnominalairflowperunitNote 8: Stated Unit Max current rating includes Fans FLC and Electric Pre-Heater ratingNote 9: Heater o temperature is based on air entering the pre-heater at -10C at nominal airlow

AirpressurelossforPre-Heaterisbetween2and5Pa

ESHE: Electric Post-Heater Data

Note 10: Stated Unit Max current rating includes Fans FLCandElectricPost-Heaterrating,butexcludestheElectricPre-HeaterratingNote 11: HeaterontemperatureisbasedairofftemperatureofPlateHeatExchangeratnominalairflow Note 12: Heater o temperatures are stated at nominal airlow

AirpressurelossforPre-Heaterisbetween2and5Pa

HWLP: Hot Water Coil (Post Heater) 82C / 71C

Heater o temperature is based on ollowing conditions: nominal air on value o 7C ; Nominal airlowValues reer to the ollowing conditions: Water Flow and Return temperatures o 82/71C; Nominal Airlow Reer to our sales oice (see backpage or contact numbers) or other design options such as alternative low and return temperatures or optional chilled water coil or heatpump system.

HWLG: Hot Water Coil (Post Heater) 45C / 35C

Heater o temperature is based on ollowing conditions: nominal air on value o 7C ; Nominal airlowValues reer to the ollowing conditions: Water Flow and Return temperatures o 45/35C; Nominal airlow

Electro Valve Kits

Actuator Motors used within all Electro Valve Kits are suitable or an electrical supply AC 24 V. Motors are designed to be controlled via aDC 010 V signal to provide proportional control. All actuator motors include an Actuator Return Spring

Size 1 Size 2 Size 3 Size 4 Size 5 Size 6NominalPower:kW(note7) 0.85 1.24 2.1 2.7 3.9 5.6

MaxRatedPower:kW 0.90 1.50 2.1 3.0 5.0 6.0Supply Voltage: V 230 230 230 400 400 400

SupplyPhasePh 1 1 1 3 3 3

ProportionalControl Yes Yes Yes Yes Yes Yes

Pre-Heater Absorbed Current: amps 3.9 6.52 9.13 7.5 12.5 8.64

Max Absorbed Current: amps (note 8) 6.5 9.12 15.13 13.1 19.3 12.04

Duct Connection Diameter 200 250 315 315 400 500

Heater o temperature: C (note 9) -5 -5 -5 -5 -5 -5

Size 1 Size 2 Size 3 Size 4 Size 5 Size 6NominalPower:kW 2.7 3.9 7.0 8.7 12.6 17.9

MaxRatedPower:kW 2.7 4.3 7.0 9.5 13.6 19.0Supply Voltage: V 230 415 415 415 415 415

SupplyPhasePh 1 3 3 3 3 3


Max Unit Absorbed Current: amps (note 10) 14.3 8.8 16.1 19.3 26.4 30.8

Heater on temperature: C (note 11) 9.9 10.0 8.2 8.3 9.3 9.4

Heater o temperature: C (note 12) 25 24.1 20.9 23.2 22.7 23.3

Size 1 Size 2 Size 3 Size 4 Size 5 Size 6Number o Rows 1 1 1 1 1 1

NominalPower:kW 2.8 4.7 8.1 9.6 14.1 22.8Heater o temperature: C 23.7 26.2 24.5 24.9 25.1 27.4

AirSidePressureloss:Pa 21 19 29 25 29 41

WaterSidePressureloss:KPa 1.0 5.0 15.0 4.0 9.0 5.0

Water Side Flow Rate : l/s 0.06 0.10 0.18 0.21 0.31 0.50

PipeConn.sizes:DN/inches 15 / 15 / 15 / 25 / 1 25 / 1 25 / 1


Size 1 Size 2 Size 3 Size 4 Size 5 Size 6

Valve Model : 1 row (82C / 71C) E SM PV A- 02 5 E SM PV A-0 40 E SM PV A- 10 0 E SM PV A-1 00 E SM PV A- 16 0 E SM PV A- 25 0

Kvs Value (m3/h) 0.25 0.4 1 1 1.6 2.5

PipeConn.sizes:DN 15 15 15 25 25 25

Valve Model : 2 row (45C / 35C) E SM PV A- 02 5 E SM PV A-0 40 E SM PV A- 10 0 E SM PV A-1 00 E SM PV A- 16 0 E SM PV A- 16 0Kvs Value (m3/h) 0.25 0.4 1 1 1.6 1.6

PipeConn.sizes:DN 15 15 25 25 25 25

Size 1 Size 2 Size 3 Size 4 Size 5 Size 6Number o Rows 2 2 2 2 2 2

NominalPower:kW 2.7 4.3 8.1 8.9 14.3 17.4Heater o temperature: C 22.8 24.8 24.6 23.7 25.3 22.6

AirSidePressureloss:Pa 41 37 64 48 65 71

WaterSidePressureloss:KPa 3.0 10.0 5.0 8.0 9.0 15.0

Water Side Flow Rate : l/s 0.06 0.10 0.19 0.21 0.34 0.42

PipeConn.sizes:DN/inches 15 / 15 / 25 / 1 25 / 1 25 / 1 25 / 1



8/167

Sound Levels & Conigurations

ModelSpeeds

% oDuty

Inlet Sound Power Levels (LwA)*Breakout

dB(A)@ 3m

SFPPowerSaving

%

PowerSaving(Watts)

63 Hz 125 Hz 250 Hz 500 Hz 1 KHz 2 KHz 4 KHz 8 KHzTotalLwA

Size 1

Boost Max 42 54 50 46 42 43 37 20 57 29 0.88 - -

75% 75% 42 53 48 43 41 40 34


9/16


10/169

IndividualPerformanceCurves

0

50

100

150

200

250

300

350

0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16

S

tatic

Pressure

(Pa)

Volume Flow (m /s)

Boost Mode

75%

60%

45%

Trickle Mode

3

0

50

100

150

200

250

300

350

400

0 0.05 0.1 0.15 0.2 0.25 0.3

Boost Mode

75%

60%

45%

Trickle Mode

Static

Pressure

(Pa)

Volume Flow (m /s)3

e3co Star - Size 1

e3co Star - Size 2


11/1610


0

50

100

150

200

250

300

350

400

0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5

S

tatic

Pressure

(Pa)

Volume Flow (m /s)

Boost Mode

75%

60%

45%

Trickle Mode

3

Boost Mode

75%

60%

45%

Trickle Mode

0

50

100

150

200

250

300

350

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7

Static

Pressure

(Pa)

Volume Flow (m /s)3

e3co Star - Size 3

e3co Star - Size 4


12/161


Boost Mode

75%

60%

45%

Trickle Mode

0

50

100

150

200

250

300

350

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9

Static

Pressure

(Pa)

Volume Flow (m /s)3

Boost Mode

75%

60%

45%

Trickle Mode

0

50

100

150

200

250

300

350

400

0 0.2 0.4 0.6 0.8 1 1.2

Static

Pressure

(Pa

)

Volume Flow (m /s)3

e3co Star - Size 5

e3co Star - Size 6


13/1612

Control Solutions

Pa

HS air flow

LS air flow

Air flow

HS constant air flow

LS constant air flow

Air flow

Pa

CAVConstant Air Volume2 Constant Air low Options

VAVVariable Air Volume - Trickle & Boost Strategy2 Air low rates - Low Speed/High Speed

Pa HS air flow

LS air flow

Air flow

COPConstantPressureControl

VAV AQVariable Air Volume plus CO

2sensor

ProportionalairflowcontrolviaCO2sensor

The e3co Star unit has a factory-pre-set controller as standard, which can be used to configure how air flows can

be modulated:

Pa

Constant pressure

Air flow

HMI Screen OverviewAlarm indication, building parameters, operation mode,

temperature, on demand set points and alarm statuscan all be viewed and set via our touch screen HMI


14/163

Accessories

Filter media upgrade

The Filter Media grade ftted to the supply air side, can be upgraded rom G4 to F7,

or enhanced protection.

Alternatively, The Filter Media grade or the supply air side can be upgraded rom

G4 to F9, or ultimate protection.

e3co-Star units can have a number o accessories ftted:

ESDC ESMPVA

Connectors 3-Port Valve + Actuator

BDER ESMF (set o 4)

Cylindrical Duct Silencers Mounting eet

HMI extension cables ESFP

10m ESC10 Optional

25m ESC25 Pre-Heater

ESPIR BDEP-46-024

PIR Occupancy Sensor Inlet damper

and actuator

e3co-Star units can be installed outside when a weather proo kit is ftted.

ESWR: Weather Roo

ESWC Weather Cowl / Bird GuardFit to inlet and discharge spigots


15/1614

AccessoriesandProductCodes

1 2 3 4 5

e3co-Star 1 SS-R e3ssential Control optione3nhanced HW/HE

e3lite HW/HE

1 - Thermal Efficiency unit (up to 70%) - completewithautomaticcontrolandCrossFlowPlate Heat Exchanger

2 - Unit Model Code Examples:

1 Unitsize=1(0.12m3/s) e3co-Star 1 6 Unitsize=6(0.90m3/s) e3co-Star 6

3 - Unit Configuration Options:SS-R Side-by-Side format (access and controls on right side)SS-L Side-by-Side format (access and controls on left side)

4 - Unit Version Options:

e3ssential Unit with NO coils fittede3nhanced HW Hotwatercoil(POSTHeater)plusappropriatecontrolsfitted

e3nhanced HE Electricheater(POSTHeater)plusappropriatecontrolsfitted e3lite HW UnitwithElectricPRE-HeaterandhotwaterPOSTHeaterpluscontrols

e3

lite HE UnitwithElectricPRE-HeaterandElectricPOSTheaterpluscontrols

5 - Controls: VAV Variable Air Volume - Trickle and BoostVAV AQ Variable Air Volume - + Air Quality (CO

2) Sensor

CAV Constant Air VolumeCOP ConstantPressure

All motors are EC type

Dia A

Length

Dia B

BDER Silencer Information

Product Coding Guide

Dia A(mm) Length(mm) Dia B mm Code

Attenuation, dB

63Hz 125Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz

200 600 300 BDER-30-020-060 -1 -3 -7 -14 -20 -26 -15 -7

200 900 300 BDER-30-020-090 -2 -3 -9 -24 -30 -36 -20 -9

200 1200 300 BDER-30-020-120 -3 -5 -14 -30 -37 -46 -25 -12

250 600 355 BDER-30-025-060 0 -2 -7 -12 -18 -23 -10 -5

250 900 355 BDER-30-025-090 -2 -2 -8 -19 -25 -32 -12 -6

250 1200 355 BDER-30-025-120 -2 -4 -11 -25 -30 -39 -14 -10

315 600 415 BDER-30-031-060 0 -2 -7 -10 -15 -20 -7 -4

315 900 415 BDER-30-031-090 -1 -2 -7 -16 -22 -24 -10 -6

315 1200 415 BDER-30-031-120 -2 -4 -10 -22 -28 -30 -12 -9

400 900 500 BDER-30-040-090 -1 -2 -6 -13 -19 -16 -8 -6

400 1200 500 BDER-30-040-120 -2 -4 -8 -18 -25 -20 -10 -8

500 900 630 BDER-30-050-090 -1 -1 -5 -11 -14 -12 -9 -6

500 1200 630 BDER-30-050-120 -1 -3 -7 -16 -20 -15 -10 -7


16/16

Flkt Woods Group - Ventilation Solutions

Flkt Woods LimitedAxial Way, ColchesterEssex, C04 5ZDUNITED KINGDOMTel: +44 (0)1206 222 555

Fax: +44 (0)1206 222 777E-mail: [email protected]

Flkt Woods OyKalevantie 39FI-20520TurkuFINLANDTel: +358 20 442 3000Fax: +358 20 442 3018E-mail: [email protected]

Flkt Woods OyHmeentie 23FI-37800ToijalaFINLANDTel: +358 20 442 3500Fax: +358 20 442 3502E-mail: [email protected]

Flkt Woods ABGesllgatan 17745 39EnkpingSWEDENTel: +46 36 19 30 00Fax: +46 171-240 97E-mail: [email protected]

Flkt Woods ABKung Hans vg12 192 68, SollentunaSwedenTel: +46 (0)771 26 26 26

Fax: +46 (0)8 626 73 10E-mail: [email protected]

Flkt Woods ABFlktvgen 2, Box 84153 22JrnaSWEDENTel: +46 8-551795 00Fax: +46 8-551744 80E-mail: [email protected]

Flkt Woods4 Avenue LaurentCELY-Batiment C - Etage 3Asnieres Sur Seine92600 FRANCETel: +33 1 80 21 07 00Fax: +33 1 80 21 07 00E-mail: [email protected]

Flkt Woods Ventilatoren GmbHAmSportplatz4DE-40882RatingenGERMANYTel: +49 2012 61038 11Fax: +49 2102 61038 18E-mail: [email protected]

Flkt Woods SpAViaPacinotti,28IT-20092, Cinisello BalsamoITALYTel: +39 02 6186 6091

Fax: +39 02 6186 0947E-mail: [email protected]

Flkt Bovent Sp. z o.o.PanattoniParkPruszkwIIul.Poudniowa2,Otarzew05-850OarwMazowieckiPOLANDTel: +48 22 392 43 43Fax: +48 22 392 43 44E-mail: [email protected]

LLC Flkt Industrial& Building Systems23,ul.ProfsojuznayaRU-117418 MoscowRUSSIATel: +7 (495) 589-31-08Fax: +7 (495) 589-31-74E-mail: [email protected]

The Flkt Woods Group is divided into three businesses:

Global Inrastructure and Industry (GII)A leader or Air Movement using ans to improve perormance o equipment and industrialprocesses

Air Climate Solutions (ACS)AworldwideHVACleaderrecognizedbyourcustomersasaproviderofsuperiorAirClimateSolutions combining Indoor Air Quality and Energy Efciency applied to specifed buildings

Ventilation Solutions (VS)A European Ventilation Specialist Servicing our customers with a complete range o

ventilation products ocused on Non residential buildings. For more specifc productinormation or Ventilation Solutions, please visit:

www.vsecatalogue.flaktwoods.com

VS/ESTB-ENG-02/0912

Flkt Woods Limited

Axial Way, Colchester, Essex, C04 5ZD

Tel 01206 222 555 Fax 01206 222 777

email [email protected] www.laktwoods.co.uk

FW e3co Star Technical Catalogue

Documents