Futura Soft Close Undermount Drawer Slides

I2-1V15.1

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C

Length Extension Closing TypeMaximum

Cabinet Depth - Inside

Minimum Cabinet Depth -

Inside

WCIItem # Salice Item # Price/Pair

12" (305mm) Full Smove Soft Close 14⅜" 12 13/16" 165427 A7555/305CP6Contact

WalzCraft ‟Customer Support”

15" (381mm) Full Smove Soft Close 17 7/16" 15⅞" 166764 A7555/381CP618" (457mm) Full Smove Soft Close 20⅜" 18⅞" 160720 A7555/457CP621" (533mm) Full Smove Soft Close 23⅜" 21⅞" 160721 A7555/533CP6

Additional lengths available - 9" (229mm). Please contact our Customer Support Team for more information.

Futura Soft Close Undermount Drawer Slides• Full extension with Smove soft close fully integrated in the runner.• Load capacity: 75 lbs dynamic/100 lbs static.• Compatible with ½" and ⅝" drawer box side wall thicknesses only.• Requires eight #6 FHP screws for fixing to cabinet (must be ordered separately - see Section I3).• Drawer height adjustment (+3mm) with A710.610 Front Locking Clips. Compatible with all gen- erations of Futura slides.• Drawer height (+2.5mm), depth (+/-2.0mm) and side (+/-1.5mm) adjustment with A750.010 Front Locking Clips. Compatible with 2012 or later Futura slides.• Front locking clips and rear mounting brackets must be ordered separately (Front locking clips require four #6 x ⅝ FHP screws per pair and rear mounting brackets require two #6 x ⅝" FHP screws per bracket, must be ordered separately - see Section I3). Salice Undermount Drawer Slides are only compatible with Salice Front Locking Clips.• Minimum inside drawer width of 8" when using either version of front locking clips.• Requires drawer box notching option NHH1.• Please see www.saliceamerica.com for additional information and technical specifications.• When ordering, please use WalzCraft's Hardware Order Form #13.

Drawer Slides by SALICE

Description WCI Item # Salice Item # PriceFront Locking Clips-left & right (pair). These are also available installed; for this option and pricing see “Release Clip Note # 1” on page I2-3. 160722 A710.610

Contact WalzCraft ‟Customer

Support

Front Locking Clips-left & right (pair). These are also available installed; for this option and pricing see “Release Clip Note # 1” on page I2-3. 170367 A750.010

Rear Mounting Bracket (Socket)-Regular - 2" wide, metal (each)* 160723 AGSKXC5Rear Mounting Bracket (Socket)-Narrow - 17/16" wide, metal (each)* 160724 AGSKXR5* When mounting the brackets (used to support the drawer slides) to the cabinet back, the different width brackets provide flexibility when encountering different cabinet side thicknesses and the proximity of the cabinet side to the inside opening of face frame.

Futura A7555 Front Locking Clips (pair) - A710.610 Front Locking Clips (pair) - A750.010

Rear Mounting Bracket - Regular AGSKXC5 Rear Mounting Bracket - Narrow AGSKXR5 NHH1 - Drawer Box Notching

Hardware

I

I2-2V15.1.com

®® 99.7% American MadeC

Length Extension Closing TypeMaximum

Cabinet Depth - Inside

Minimum Cabinet Depth -

Inside

WCIItem # Salice Item # Price/Pair

21" (533mm) Full Push Soft Close 23⅜" 21⅞" 165444 A7557/533CP6Additional lengths available - 12" (305mm), 15" (381mm), 18" (457mm). Please submit requests to our Customer Support Team.

Futura “Push” Undermount Drawer Slides • PUSH: This new opening system for handle-less drawers is fully integrated in the runner. A slight "push" on the drawer front is sufficient for the drawer to self-open. • Full extension runner. • Load capacity: 75 lbs dynamic/100 lbs static. • Compatible with ½" and ⅝" drawer box side wall thicknesses only. • Requires eight #6 FHP screws for fixing to cabinet (must be ordered separately - see Section I3). • Drawer height adjustment (+3mm) with A710.610 Front Locking Clips. Compatible with all generations of Futura slides. • Drawer height (+2.5mm), depth (+/-2.0mm) and side (+/-1.5mm) adjustment with A750.010 Front Locking Clips. Compatible with 2012 or later Futura slides. • Front locking clips and rear mounting brackets must be ordered separately (Front locking clips require four #6 x ⅝ FHP screws per pair and rear mounting brackets require two #6 x ⅝" FHP screws per bracket, must be ordered separately - see Section I3). Salice Undermount Drawer Slides are only compatible with Salice Front Locking Clips. • Minimum inside drawer width of 8" when using either version of front locking clips. • Requires drawer box notching option NHH1. • Please see www.saliceamerica.com for additional information and technical specifications. • When ordering, please use WalzCraft's Hardware Order Form #13.

Description WCI Item # Salice Item # PriceFront Locking Clips-left & right (pair). These are also available installed; for this option and pricing see “Release Clip Note # 1” on page I2-3. 160722 A710.610

Contact WalzCraft ‟Customer

Support

Front Locking Clips-left & right (pair). These are also available installed; for this option and pricing see “Release Clip Note # 1” on page I2-3. 170367 A750.010

Rear Mounting Bracket (Socket)-Regular - 2" wide, metal (each)* 160723 AGSKXC5Rear Mounting Bracket (Socket)-Narrow - 17/16" wide, metal (each)* 160724 AGSKXR5* When mounting the brackets (used to support the drawer slides) to the cabinet back, the different width brackets provide flexibility when encountering different cabinet side thicknesses and the proximity of the cabinet side to the inside opening of face frame.

Futura A7557 Front Locking Clips (pair) - A710.610 Front Locking Clips (pair) - A750.010

Rear Mounting Bracket - Regular AGSKXC5 Rear Mounting Bracket - Narrow AGSKXR5 NHH1 - Drawer Box Notching

HardwareDrawer Slides by SALICE

I

I2-3V15.1

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C

Length Extension Closing Type Color WCI Item # Salice Item # Price/Pair18" (450mm) Single Self-Closing White 160715 A208/45.1 Contact

WalzCraft ‟Customer

Support20" (500mm) Single Self-Closing White 160716 A208/50.122" (550mm) Single Self-Closing White 160717 A208/55.1

Additional lengths available - 10" (250mm), 12" (300mm), 14" (350mm), 16" (400mm), 24" (600mm). Please contact our Customer Support Team for more information.

Description WCI Item # Salice Item # Price/EachRear Mounting Brackets (Socket) for A208 drawer slide, right 160718 ASO208NANDR Contact

WalzCraft ‟Customer

SupportRear Mounting Brackets (Socket) for A208 drawer slide, left 160719 ASO208NANDL

• Single extension (3/4), white epoxy coated self closing drawer slides. • Load capacity: 75 lbs dynamic/100 lbs static. • Compatible with all drawer box side wall thicknesses. • Requires eight #6 FHP screws for fixing to cabinet (must be ordered separately see page I3-1). • Rear mounting brackets must be ordered separately (two #6 x ⅝" FHP screws per bracket required - must be ordered separately - see page I3-1). • Does not require any drawer box notching.. • Please see www.saliceamerica.com for additional information and technical specifications. • When ordering, please use WalzCraft Order Form #5.

A208 Drawer Runners

Rear Mounting Brackets

Rear mount sockets

Single Extension Epoxy Drawer Runners

Front Locking Clips (Release Clips) Installation Notes

1) Installation

The Salice Front Locking Clips (A710.610 or A750.010) required for the Futura Soft Close and Futura Push Undermount Drawer Slides can also be installed by Walzcraft.A710.610 = Charge per pair, installed (includes cost of clips).A750.010 = Charge per pair, installed (includes cost of clips).

2) NHH1 The NHH1, Notch and Hook Hole Combination must be ordered in conjunction with front locking clips (release clips) to allow for installation.

3)Other FrontLocking Clips(Release Clips)

Salice Undermount Drawer Slides are only compatible with Salice Front Locking Clips. If ordering Blum Drawer Slide Locking Devices (Release Clips) from Section I3, you will need to order Blum Drawer Slides separately.Front locking clips (release clips) vary by manufacturer. WalzCraft can provide and install other brands upon request.

The following information is required when ordering front locking clips (release clips) that are not invento-ried by WalzCraft: • Brand and Model # of the drawer slide being used. • Manufacturer’s Part # of the Front Locking Clips (Release Clips), if available.

4) Availability Available with assembled melamine and pre-finished wood drawer boxes only. Not available with RTA (Ready to Assemble) drawer boxes.

Drawer Slides by SALICEHardware

I

I2-4V15.1.com

®® 99.7% American MadeC

1-800-237-1326 www.WalzCraft.com®

Note Page Hardware

I

I4-1V15.1

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C

Tru-TracTM 100 is a smart and economical choice for a 100-pound class, full extension ball-bearing slide solution. Designed to meet the needs of today's value-conscious cabinet makers, Tru-Trac 100 meets BHMA test standards.

Tru-TracTM 100 features a non-handed design, industry standard ½" side clearance and lever disconnect for easy drawer re- moval. Ball-bearing construction delivers a smooth operation and a positive stop bumper provides an anti-rebound feature.

• 32mm and Traditional Hole Patterns. • Non-handed Design. • Face Frame Mounting Holes. • Lever disconnect for easy drawer removal. • Full Extension. • Side mounting for frame and frameless construction. • Clearance: ½" [12.7mm] +1/32 / -0" • Height: 125/32" [45mm] • Load Capacity: 100-pound class. • Zinc Finish. • Telescopic movement on steel ball-bearings. • Compatible with ½", ⅝" and ¾" drawer box side wall thicknesses. • Comes with twelve #7x12P wood screws. • Rear mounting brackets for face frame installation must be ordered separately. Will fit left or right installation. • Does not require any drawer box notching. • When ordering, please use WalzCraft Order Form #5.

Description WCI Item # Tru-Trac Item # Price/EachRear Mounting Bracket - 27/16"W x 1⅞"H x 3 1/2"L, metal (each) 172210 KVTT401

Tru-TracTM 100 Series Side Mount Drawer Slide

Drawer Slides - Side Mount

Length Actual Length Extension Closing Type Color WCI Item # Tru-Trac Item # Price/Pair18" 17¾" (450mm) Full Positive Stop Zinc 172207 KVTT100 B18 Contact

WalzCraft ‟Customer Support”

20" 19¾" (500mm) Full Positive Stop Zinc 172208 KVTT100 B2022" 21¾" (550mm) Full Positive Stop Zinc 172209 KVTT100 B22

Additional lengths available - 10" [250mm], 12" [300mm], 14" [350mm], 16" [400mm], 24" [600mm], 26" [650mm],28" [700mm]. Please contact our Customer Support Team for more information.

Rear Mounting BracketSold Separately.

Hardware

I

I4-2V15.1.com

®® 99.7% American MadeC

1-800-237-1326 www.WalzCraft.com®

Note Page Hardware

I

I9-1V15.1

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C

Drawer Slides by blumTANDEM plus BLUMOTION Undermount Drawer Slides - 563H

• Full extension concealed drawer runners.• Face Frame or Panel (Frameless) cabinets.• BLUMOTION soft closing.• TANDEM smooth running action.• Available in 9" to 21" lengths (3" increments).• 13mm (½") to 16mm (⅝") drawer box material thickness.• Made in the USA.• 100 lbs. static load capacity.• Four-Dimensional adjustment.• Elongated holes for depth adjustment.• Requires drawer box notching option NHH1.• Requires eight #6 x ⅝" wood screws for fixing to cabinet (must be ordered separately - see Section I3).• Locking devices and rear brackets must be ordered separately. ◦ Locking devices require four #6 x ⅝" wood screws per pair, must be ordered separately - see Section I3). ◦ Rear brackets require three #6 wood screws per bracket, must be ordered separately - see Section I3). ◦ Blum Undermount Drawer Slides are only compatible with Blum locking devices.• Please see www.blum.com or call Blum at (800) 438-6788 for additional information and technical support.• When ordering, please use WalzCraft Order Form #13 for hardware.

DrawerLength Extension Closing Type

Maximum Cabinet Depth with Rear BracketRunner Length Blum Item # WCI Item # Price

Per PairMaximum Minimum9" (229mm) Full BLUMOTION Soft Close 1125/32" (299mm) 1015/32" (266mm) 103/16" (259mm) 563H2290B10 174009

Contact WalzCraft ‟Customer Support”

12" (305mm) Full BLUMOTION Soft Close 149/16" (370mm) 1229/32" (328mm) 129/16" (319mm) 563H3050B 17401015" (381mm) Full BLUMOTION Soft Close 179/16" (446mm) 1529/32" (404mm) 159/16" (395mm) 563H3810B 17401118" (457mm) Full BLUMOTION Soft Close 209/16" (522mm) 1829/32" (480mm) 1817/32" (471mm) 563H4570B 17401221" (533mm) Full BLUMOTION Soft Close 2319/32" (599mm) 2115/16" (557mm) 219/16" (548mm) 563H5330B 174013

Undermount Drawer Slide Components NHH1 - Drawer Box Notching

Blum Technical Support: (800) 438-6788 www.blum.com

locking devices

slides / runners

rear mounting brackets(face frame only)

Hardware

I

I9-2V15.1.com

®® 99.7% American MadeC

• For TANDEM 563 series runners only.• For use when installing TANDEM runners in face frame cabinets. • Not necessary for frameless (panel) cabinet installation.• Two required per drawer.• Lateral self-alignment ⅛" (3mm).• Non-handed, one-piece stamped steel design, zinc-coated.• Use at least three #6 wood screws per bracket.• Not for use with 9" runners.

Blum Locking Device for Undermount Drawer Slides

WCI Item#172566

Rear Mounting Bracket for Undermount Drawer Slides (Face Frame Cabinet Only)

Front Locking Device and Rear Bracket

Description Blum Item # WCI Item # PriceFront Locking Device - Left & Right (pair). These are also available installed; for this option and pricing see Section I3. T51.1901 L/R 172566

Contact WalzCraft ‟Customer Support”

Rear Mounting Bracket - For Face Frame Cabinet (each) 295.3750.01 174014

TANDEM Template T65.1600.01 174015

• One right and one left required per drawer.• With side-to-side adjustment.• Captive right device and self aligning left device.• Self-adjusting drawer length tolerance.• Steel base with synthetic, spring loaded release levers.• Minimum inside drawer width of 611/16" (170mm).• Height adjustment of +⅛" (3mm).• Side adjustment of +/-1/16" (1.5mm).• Requires four #6 x ⅝" wood screws per pair.• For use with 563 series runners only.

TANDEM Template

• Essential tool for drawers using 563 series TANDEM runners.• To bore the 6MM diameter holes for rear hooks.• Pre-bore the 2.5mm diameter holes for TANDEM locking devices at the required angle.

Blum Technical Support: (800) 438-6788 www.blum.com

6 mm diameter bit

2.5 mm diameter bit with extension

Hardware

I

Drawer Slides by blum

I9-3V15.1

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C

1-800-237-1326 www.WalzCraft.com®

Note PageHardware

I