Underground Distribution Fuse Service Equipment Street Lighting Cutouts Rated at 25A for single phase supplies. W T Henley has a choice of two slim-line single phase models, incorporating either a single pole or double pole switching action. Both of these are manufactured from glass re-inforced flame retardant materials, designed to be robust yet lightweight, incorporating a low force lever release system. All the Street Lighting Cutouts are designed to meet the requirements of BS 7654:2010 and are configured for SNE or CNE cables as required. Each is designed with a drip proof hood. These units not only allow the looping in and out of single phase supplies but when used in conjunction with our optional terminals and shrouds, will also suit a 3- phase supply. All W T Henley cut-outs are designed to accept offset tag type fuse-links (LST) and are supplied complete with fixing screws and cable entry bushes. At the heart of maintaining the supply to street lighting luminaires are robust and reliable fused Cutouts. • IPC (Insulated Piercing Connector) version requiring no stripping of Insulation. • Padlocking ‘dead’ facility available. • Supplied with incoming/outgoing bushes. • Looping in /out. • Suits Aluminium or Copper conductors. • Armour termination kit available. WT Henley Limited - Silverkey, Church Manorway, Belvedere, Erith, Kent DA8 1EX, England - www.wt-henley.com Telephone: +44 (0) 1322 444500 - Facsimile: +44 (0) 1322 444502 - Email: [email protected]SICAME GROUP • Slim-line compact designs – ideal for modern lighting columns and other street furniture with space restrictions where internal space is restricted. • Fuse carriers accept offset tag type fuselinks to BS 88 Pt1/IEC 269-1. • Both single and double pole isolation available. • Kit available to enable use of 3-phase supplies. • CNE or SNE versions.
2
Embed
Fuse Service Equipment Street Lighting Cutouts - ITE Street Lighting Cutouts 2012.pdf · Fuse Service Equipment Street Lighting Cutouts Rated at 25A for single phase supplies. ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
UUnnddeerrggrroouunndd DDiissttrriibbuuttiioonn
Fuse Service Equipment
Street Lighting CutoutsRated at 25A for single phase supplies.
W T Henley has a choice of two slim-linesingle phase models, incorporating eithera single pole or double pole switchingaction. Both of these are manufacturedfrom glass re-inforced flame retardantmaterials, designed to be robust yetlightweight, incorporating a low force leverrelease system.
All the Street Lighting Cutouts aredesigned to meet the requirements of BS7654:2010 and are configured for SNE orCNE cables as required. Each is designedwith a drip proof hood.
These units not only allow the looping inand out of single phase supplies but whenused in conjunction with our optionalterminals and shrouds, will also suit a 3-phase supply.
All W T Henley cut-outs are designed toaccept offset tag type fuse-links (LST) andare supplied complete with fixing screwsand cable entry bushes.
At the heart of maintaining the supply to street lightingluminaires are robust and reliable fused Cutouts.
• IPC (Insulated Piercing Connector)version requiring no stripping ofInsulation.
• Padlocking ‘dead’ facility available.
• Supplied with incoming/outgoingbushes.
• Looping in /out.
• Suits Aluminium or Copperconductors.
• Armour termination kit available.
WT Henley Limited - Silverkey, Church Manorway, Belvedere, Erith, Kent DA8 1EX, England - www.wt-henley.comTelephone: +44 (0) 1322 444500 - Facsimile: +44 (0) 1322 444502 - Email: [email protected]
SICAME GROUP
• Slim-line compact designs – ideal formodern lighting columns and otherstreet furniture with space restrictionswhere internal space is restricted.
• Fuse carriers accept offset tag typefuselinks to BS 88 Pt1/IEC 269-1.
• Both single and double pole isolationavailable.
• Kit available to enable use of 3-phasesupplies.
• CNE or SNE versions.
Low force lever release style
Overall Dimensions
Height: 150mm
Width: 67mm
Projection: 49mm
Wiring Facilities
Basic Cutout accepts single phase cables only.
Terminals suitable for terminating up to 25mm²Solid Aluminium or stranded Copper conductors.
To use with 3 phase cables
This requires additional loop in connectors andterminal shrouds. For each cutout it is necessaryto use 4 loop-in connectors plus 4 shrouds.
Loop in/out Connector Terminals
Incoming – Loop in/out up to 35mm² aluminiumor copper conductors.
Outgoing – two ways for up to 16mm² StrandedCopper.
For armoured cables up to 16mm² 4-core
An armour bond kit is available, comprising: -clamp, ferrules, lead-strips and fixing screws.Suitable for loop in/out cables.
Product Code Description54715-18 SNE Single Pole54715-20* CNE Single Pole54715-22 CNE Double Pole54715-40** SNE Single Pole with IPC54715-41** CNE Single Pole with IPC54718-15 Armour Bond Kit54718-20 Loop In Connector54718-25 Terminal Shroud
Original style
Overall Dimensions
Height: 145.5mm
Width: 73.9mm
Projection: 56.9mm
Wiring Facilities
Basic Cutout accepts single phase cables only.
Terminals suitable for terminating up to 25mm²Solid Aluminium or 16mm² stranded Copperconductors.
To use with 3 phase cables
This requires additional loop in connectors andterminal shrouds. For each cutout it is necessaryto use 4 loop-in connectors plus 4 shrouds.
Loop in/out Connector Terminals
Incoming – Loop in/out up to 35mm² aluminiumor copper conductors.
Outgoing – two ways for up to 16mm² StrandedCopper.
For armoured cables up to 16mm² 4-core
An armour bond kit is available, comprising: -clamp, ferrules, lead-strips and fixing screws.Suitable for loop in/out cables.
Product Code Description
54715-03 Type 1 Cutout (SNE)
54715-04 Type 2 Cutout (CNE)
54718-20 Loop In Connector
54718-25 Terminal Shroud
54718-15 Armour Bond Kit
54718-30 Spare Fuse Carrier
Low Force Lever Release model
Low Force Lever Release modelwith clear cover
Original model
General Note The equipment detailed in this publication should be installed by a suitably qualified person. WT Henley Limited reserves the right to make changesin product specification without notice or liability. All information is subject to WT Henley’s own data and is considered accurate at time of going to print.