This document is co-confidential between FURUNO & ARI.
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
0
This training application has been developed by ARI.
ARI and the ARI logo are trademarks of ARI. All other trademarks and copyrights are
acknowledged.
Visit us: www.arisimulation.com
RECORD OF CHANGES
VER REV DATE PREPARED BY REMARKS
1.0 0 6th Sept ‘14 JG User Manual for the application (FMD-
3100 FMD-3200/3300).
1.1 0 15th Sept ’14 JG Tutorial for Control Unit 3100 added.
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
1
CONTENTS 1 STARTING UP ...................................................................................................... 2
1.1 NEW USER .................................................................................................................................. 3
1.2 USER LOGIN ............................................................................................................................... 4
1.3 ECDIS FMD – 3100 FMD – 3200/3300 CBT ...................................................................... 5
2 UNDERSTANDING THE USER INTERFACE ........................................................... 7
2.1 TUTORIAL .................................................................................................................................... 7
2.2 HELP ............................................................................................................................................. 8
2.3 MULTIPLE CHOICE TEST ........................................................................................................... 9
2.4 VALIDATION AND CERTIFICATION ..................................................................................... 10
2.5 PAUSE ........................................................................................................................................ 12
2.6 EXIT ............................................................................................................................................. 12
3 ANNEXURE: GROUP, CHAPTER & SECTION CLASSIFICATION (TREE STRUCTURE) .......................................................................................................................... 13
3.1 TRAINING – FMD 3100 FMD 3200/3300 ........................................................................ 13
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
2
1 STARTING UP
The application is packaged in the DVD/USB flash drive. It would contain a folder with a setup file
for the application. In case the application does not run automatically, the user must run the setup
by double clicking on it.
Fig. 1. Running the application
This will initiate the installation process for the application. The process would include running a
background check of the availability of flash player and the .NET framework. If these are not
available on the system, the installation process would also include initiating the installation of the
same. Once the pre-requisites for running the application are confirmed, the application will be
launched.
The screen which comes up as the application launches is shown below. This is the login screen.
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
3
Fig. 2. Login Screen
The user must click on the help button provided on the top right corner. This will open the user
manual for reference. Minimize and close buttons have their usual purpose.
The user can enter the login details; a valid user id and password, if these have already been
created. In case, the user has logged in for the first time, he/she needs to register himself/herself
and create the user id and password.
To register, the user needs to click on ‘Create new user’.
1.1 NEW USER
The user clicks on ‘Create new user’. The following screen with ‘Personal Details Form’ comes up.
The user needs to fill the details as necessary and click on ‘Submit’ to register. Since all the fields
are mandatory, the user needs to fill every detail.
‘Help’ button
‘Close’ button
‘Minimize’ button
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
4
Fig. 3. Personal Details Form
After entering the details in the form, the user must click on ‘Submit’. If all the details have been
entered, the user will be created successfully by the application, after accepting the license
agreement terms. Consequently, a message will be displayed, as shown below.
Fig. 4. Message box: Successful user creation
The user must click on ‘OK’. This will direct the user to the login page of the application, where the
recently created User ID and password will be used to login.
1.2 USER LOGIN
The login screen which comes up is shown below. The user must enter the ID and password details
to login.
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
5
Fig. 5. Login screen
After entering the details, the user must click on ‘Login’. With this, the user is ready to take the
training ECDIS FMD-3100 FMD-3200/3300 and start reading the tutorials.
1.3 ECDIS FMD – 3100 FMD – 3200/3300 CBT
Once the user has login the application, he/she can proceed with the tutorials. In order to aid sequential learning, the user is required to go through every tutorial completely, at least the first time. Once the user has gone through a tutorial till the end and has clicked on ‘Close’ button, the next tutorial will be unloacked. For every section/tutorial that has been unlocked, there appears a green indication adjacent to the same.
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
6
Fig. 6. Tutorial
The text box is movable and can be minimized too. The text box can be moved by clicking and dragging it to the desired location. To minimize the text box, the user can click on the minimize button provided on the top right corner of the text box.
The minimized text box is shown in the image below.
Fig. 7. Tutorial – Minimized Textbox
The text box can be restored by clicking on ‘Restore Up’ button located on the top right corner of the minimized text box.
‘Restore Up’ button
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
7
2 UNDERSTANDING THE USER INTERFACE
The ECDIS FMD-3100 FMD-3200/3300 CBT interface presents the tutorials in the form of a tree
structure on the left hand side. In case of lower resolution, the tree structure will be dock-able. The
tree structure will be then available on mouse hover on left side.
2.1 TUTORIAL
A tutorial can be played by clicking on the corresponding name in the tree structure.
Fig. 8. Home Screen
The user can see the tree structure of the contents of training, including the groups; with each group
containing a number of chapters, each chapter containing a number of sections and each section
having various contents. Each content is a topic, corresponding to which there is a tutorial which can
be played by the user.
When the tutorial is being played, the user sees a text box, which contains a textual description
regarding the tutorial. Also, in order to navigate through the tutorial, certain buttons are provided.
The controls available are as follows:
‘Play’ button: This button is used to play the current animation.
‘Replay’ button: This button is used to replay the tutorial from start.
‘Previous’ button: This button is used to go to the previous animation in the tutorial.
‘Next’ button: This button is used to go to the next animation in the tutorial.
‘Close’ button: This button is available only when the user reaches at the end of the
tutorial. It is used to close the tutorial and consequently unlock the next tutorial.
‘Minimize’ button: This button is used to minimize the text box.
‘Previous’ button
‘Replay’ button
‘Next’ button
‘Play’ button
‘Minimize’ button
Tree Structure: Group/
Chapter/Section/ Content
‘EXIT’ button ‘Pause’ button
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
8
2.2 HELP
To aid the training course, the user has been provided with the Help button. This button is available on the top right corner of the application and is being denoted by a question mark - ‘?’ (Refer image below). The user can click on this button at any time of the training.
Fig. 9. Help Button
Clicking on this button will present the screen as shown below. Besides the user manual, there are other documents which are available during the training.
Fig. 10. Help available
‘Help’ button
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
9
Clicking on ‘Documents available during training’ will open another window, as shown below. This is the list of documents available. To open a document, the user must click on the same.
Fig. 11. Help: List of documents available during training
To open the user manual for the training application, the user must click on ‘ECDIS FMD-3100 FMD-3200/3300 CBT User Manual’.
‘Close’ and ‘Back’ buttons are provided on the windows to close and go back to the previous screen, respectively.
2.3 MULTIPLE CHOICE TEST
In order to complete the training, the user needs to answer the questions in the MCT correctly. MCT
will be available once the user has completed all the tutorials.
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
10
Fig. 12. MCT
2.4 VALIDATION AND CERTIFICATION
After the user has passed the assessment test for the course, he/she needs to proceed with issuance of the certificate. To get the certificate issued valid license key needs to be entered in the system. Consequently, the user must click on ‘Validation and Certification’ available in the tree structure. The following screen is visible.
Fig. 13. Validation and Certification: License Key
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
11
The user must enter the license key available for the course. To get the key validated, the user must click on ‘Go’. If the key is valid, a new window opens, where the ship owner details need to be added.
Fig. 14. Validation and Certification: Ship Owner Details
Fig. 15. Validation and Certification: Ship Owner Details added
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
12
Fig. 16. Validation and Certification: Details added successfully
Confirm the details by clicking on ‘Yes’ and proceed.
After validating the key and adding the ship owner, the user must download a training details file. This file can be downloaded by clicking on the ‘Download File’ button available. The user can save the file in the desired location and then send it to the training administrator for authentication of the license key and hence, generating the training certificate.
Clicking on the‘Email’ button will open the email client (if configured). The downloaded training details file should be attached to the same and e-mailed to the administrator. Emailing the training details file to the training administrator will complete the training formalities on the user’s part.
2.5 PAUSE
This button is provided to pause the animation or freeze the application. Clicking on this button will pause a running animation, disable any other control on the tutorial and will not allow any selection from the tree structure.
2.6 EXIT
To exit the application, the user can click on this button.
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
13
3 ANNEXURE: GROUP, CHAPTER & SECTION CLASSIFICATION
(TREE STRUCTURE)
3.1 TRAINING – FMD 3100 FMD 3200/3300
GROUP 1: GENERAL
CHAPTER 1 FAMILIARIZATION WITH AVAILABLE FUNCTIONS
Section 1 INTRODUCTION
Introduction
Start Up and Shutdown
Control Unit – 3200/3300
Control Unit – 3100
Instant Access Knob
Mouse Function
Section 2 INFORMATION BARS
Icons
Status Bar
Instant Access Bar – Common bar
Instant Access Bar – Chart maintenance
Instant Access Bar – Voyage planning
Section 3 INFORMATION BOXES
Sensor Information Box
Own Ship Function Box
Overlay/NAV Tools Box
EBL and VRM Boxes
Section 4 NICE TO KNOW FUNCTIONS
Menu
Standby
Alert list and Alert log
Datum
Customize
Save Button
CHAPTER 2 MANUALS, SOFTWARE AND HARDWARE
Section 1 MANUALS
Operator’s Manual
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
14
Operator’s Guide
Operator’s Manual on pdf
ECDIS Chart 1
Section 2 HARDWARE & SOFTWARE
Hardware & Maintenance
Operating System, Firewall, Antivirus& Software
GROUP 2: PRE-DEPARTURE
CHAPTER 3 SENSORS
Section 1 SENSORS
Kalman Filter
Sensors
Position Event
Dead Reckoning
Section 2 CONNECTED EQUIPMENT
Fall Back
Safety Message
NAVTEX
Common Consistent Reference Point (CCRP)
Section 3 ECDIS MINDSET
ECDIS Mindset
CHAPTER 4 VISUAL SETTINGS AND SAFETY CONTOUR
Section 1 VISUAL SETTING
DISP Setting
User Profiles
CHAPTER 5 DOCUMENTATION AND FILE HANDLING
Section 1 MOB & EVENT
User Event
Man Over Board
Section 2 RECORDS
Voyage Log
Details Log
Alert Log
Danger Target Log
Chart Usage Log
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
15
Playback
Screenshot
CHAPTER 6 CHART HANDLING
Section 1 CHART PRESENTATION
Manage Charts
Cell Status
License
Section 2 LOADING &UPDATNG CHARTS
Load & Update ENC
Update RNC
Chart Legend
Section 3 ADDITIONAL CHART FEATURES
Manual Updates
Delete Chart
Chart Viewing Dates
T&Ps
AIO
CHAPTER 7 PREPARATIONS AND PLANNING
Section 1 ROUTE PLANNING
Ship and Route Parameters
Route Plan
User Chart and Notes
Section 2 ROUTE PLANNING TOOLS
Route Bank
SAR
Hard Copy
Section 3 OVERLAYS
User Chart
Notes
GROUP 3: DURING VOYAGE
CHAPTER 8 MONITORING
Section 1 MONITORING
Route Monitor
Section 2 ETA
ECDIS FMD-3100 FMD-3200/3300 CBT: USER MANUAL
16
ETD and ETA
Chart Alert
Section 3 MODES OF USING ECDIS
Navigation, Pilot on board, standby
Section 4 MOB & EVENT MARKS
Man Over Board
Event
Section 5 NAVTEX UPDATES
Manual Updates with information from NAVTEX
GROUP 4: AFTER VOYAGE
CHAPTER 9 ARRIVAL
Section 1 ARRIVAL
Voyage Log
Chart Usage Log
Standby
GROUP 5: EXAMINATION
CHAPTER 10 EXAMINATION
Section 1 EXAMINATION
Multiple Choice Test
Validation & Certification
Goodbye and Contact information