Sinterite | 310 State Street, St. Marys, PA 15857 | 814-834-2200 | www.sinterite.com VACUUM BRAZING FURNACES Our Humpback Continuous Atmosphere Furnace is an inclined mesh belt conveyor furnace designed to allow large door openings while providing extremely low furnace dewpoints. This combination assures minimal gas consumption and maximized operational cost savings. Parts up to 24” high can be processed without negative effects on the furnace atmosphere integrity. Moreover, the addition of our exclusively manufactured HyperCooler Accelerated Cooling System will reduce the amount of time the stainless steel dwells in the sensitization temperature range of 815-425°C (1500-800°F). Improving corrosion resistance versus product cooled via standard cooling methods. For Applications Requiring: LOW DEWPOINT • HIGH GRADE STAINLESS STEEL Straight Through Continuous Furnaces offer continuous product throughput and complete process flexibility. Each section of the furnace has been carefully engineered for ease of equipment operation, maintenance and long life under full production capacities. A folded and compressed ceramic fiber blanket insulation is used to reduce shrinkage and gaps, providing economy, reliability and efficiency. The belt drive is sized to minimize stress and extend operating life. Heavy duty steel construction provides a rigid shell to reduce flexing and provide support for components. Cooling sections are supported on free moving rollers to accommodate muffle growth, reducing stress and extending muffle life. Controls, instrumentation and components are selected from international suppliers to give you dependable operation and readily available replacement parts. CONVEYOR BELT HUMPBACK CONVEYOR For Applications Requiring: CARBON STEEL • 304 STAINLESS STEEL ATMOSPHERE BRAZING FURNACES