Lecture 5 - Cadkey 1 Fundamentals of Engineering – Honors – ENGR H191 Question of the Day What is the Name of the Bridge in this Clip? ANSWER: The Tacoma Narrows Bridge Bridge.mpeg
Lecture 5 - Cadkey 1
Fundamentals of Engineering – Honors – ENGR H191
Question of the Day
What is the Name of the Bridge in this Clip?
ANSWER:
The Tacoma Narrows Bridge
Bridge.mpeg
Lecture 5 - Cadkey 2
Fundamentals of Engineering – Honors – ENGR H191
Question of the Day (Part 2)What was the Cause of the Failure?
ANSWER:
A lack of damping in the design
Lecture 5 - Cadkey 3
Fundamentals of Engineering – Honors – ENGR H191
Topics For Today
Scales and Scaling
Alternate Views
CK5 Problem #2 – Title Block
Quiz – Multi-view and pictorial drawings
Lecture 5 - Cadkey 4
Fundamentals of Engineering – Honors – ENGR H191
Scaling a Drawing
Scaling a drawing is a process for making an object fit the dimensions of the display media
Scales are tools convenient to use when creating a drawing with a standard scale (conversion factor)
Lecture 5 - Cadkey 5
Fundamentals of Engineering – Honors – ENGR H191
Types of Scales
Architect’s A measurement = 1’ 0” typically,
divisions are feet and inches
Civil Engineer’s 1” = 10’s of feet, divisions are 0.1’
Mechanical Engineer’s Some unit – 1”
Lecture 5 - Cadkey 6
Fundamentals of Engineering – Honors – ENGR H191
Architect’s Civil Engineer’s Mechanical Engineer’s
Scales Scales Scales
Full size 1” = 0’1” 1” = 10.0’ 2” = 1”
Quarter size3” = 1’-0” 1” = 20.0’ 1 ½” = 1”
One-eighth 1½” = 1’-0” 1” = 30.0’ 1” = 1”
One-twelfth 1” = 1’-0” 1” = 40.0’ 3/4” = 1”
1/2” = 1’-0” 1” = 50.0’ 1/2” = 1”
3/8” = 1’-0” 1” = 60.0’ 1/4” = 1”
1/4” = 1’-0” 1” = 80.0’ 1/8” = 1”
3/16” = 1’-0” 1” = 100.0’1/8” = 1’-0”3/32” = 1’-0”
Three Common Types of Scales
Lecture 5 - Cadkey 7
Fundamentals of Engineering – Honors – ENGR H191
Architect’s Scale –Major Unit = 1 foot Divisions = inches
Civil Eng. Scale –Major Unit 1 inch = 10’s of feet
Divisions = tenths
Mech. Eng. Scale –Major Unit = 1 inch Divisions = fraction of an inch
Lecture 5 - Cadkey 9
Fundamentals of Engineering – Honors – ENGR H191Types of Scales by Construction
Lecture 5 - Cadkey 10
Fundamentals of Engineering – Honors – ENGR H191
Open-divided
Full-divided
Type of Scale by Presentation
Lecture 5 - Cadkey 12
Fundamentals of Engineering – Honors – ENGR H191
Conventional and Alternative View Arrangements
Review of “Conventional” Arrangement
Demonstration of “Alternative” Arrangement for Right Side View
Lecture 5 - Cadkey 13
Fundamentals of Engineering – Honors – ENGR H191Convention on Labeling of Views
Lecture 5 - Cadkey 14
Fundamentals of Engineering – Honors – ENGR H191Conventional Arrangement of Views
Lecture 5 - Cadkey 15
Fundamentals of Engineering – Honors – ENGR H191Unfolding of Coordinate Planes - Conventional
Lecture 5 - Cadkey 16
Fundamentals of Engineering – Honors – ENGR H191
R 1
R 2
Alternate Arrangement of Views for the Right Side
Lecture 5 - Cadkey 18
Fundamentals of Engineering – Honors – ENGR H191
Border Line
Title Block
Today’s CADKEY Project (CK5 #2)
Lecture 5 - Cadkey 19
Fundamentals of Engineering – Honors – ENGR H191
Establish a File Name Format– i.e. EG H191 Proj #1
and/or EG H191 Dwg #7
Title Block Information
Lecture 5 - Cadkey 20
Fundamentals of Engineering – Honors – ENGR H191
Parts and Patterns
The borderline and title block are saved as a pattern file so that they may be added to a part file. A part file can be composed of one part and multiple patterns. The reverse is not true. Once you have done your title block you can use it again and again by simply changing the title, date, Dwg # and File Name.
Lecture 5 - Cadkey 21
Fundamentals of Engineering – Honors – ENGR H191
Today’s Assignment
Dwg 9 – CK5 #2 Title Block and Patterns with CAEG Due at end of class today
Dwg 10 – ML-1 Missing Line Problems with pictorials
Use Multi-view Sketch Paper and/or Isometric Sketch Paper
Due at beginning of the next lecture