Full-Line Catalogue Vol. 2

Online eStore www.aaestore.com.au

P: +61 (02) 60 262 614 E-Mail: [email protected]

Aerospace MROPrecision Manufacturing

Aerospace Parts Distribution

Aerospace & Mil-Spec

Hardware and Supplies

Full-Line Catalogue Vol. 2

Hi-Lok Pins & Collars p. 63 - 82

Camlocs p. 83 - 85

Washers p. 93 - 99

Plug Buttons, Spring Pins, Retaining Rings & Cotter Pins p. 100 - 102

Nuts p. 103 - 116

Anchor Nuts & Clip Nuts p. 117 - 124

Spacers & Bushings p. 125

Grommets & Packings / O-Rings p. 126 - 133

Electrical Products p. 134 - 143

Bolts & Pins p. 12 - 29

Screws p. 30 - 44

Solid Rivets p. 55 - 62

Dzus, Tridair, Southco & Airloc p. 86 - 92

Blind Rivets, Lockbolts, Jo-Bolts & Blind Rivet Nuts p. 45 - 54

Nylon & Brass Fittings, Poly-Flo Tubing p. 152

Tube & Pipe Fittings p. 153 - 176

Valves, Reducers, Lubrication Fittings & Caplugs p. 177 - 178

Hose, Hose Fittings & Grease Fittings p. 180 - 185

Bearings & Rod Ends p. 186 - 189

Dzus Latches p. 190

Hinge, Pulleys, Cable Hardware & Safety Wire p. 191 - 195

Sheet Metal Tools & Bits p. 196 - 198

Gaskets p. 199

Hand Tools p. 200 - 202

Consumables & Hardware Kits p. 203 - 214

Inserts & Helicoils p. 144 - 148

Hose Clamps & P-Clamps p. 149 - 151

Filters, Conical Seals & Drain valves p. 179

© 2022 Australian Aerospace EngineeringAll Rights Reserved. Printed in Australia.

Catalogue Cover Image: F-35A Lightning II RAAF Base Williamtown.

Image courtesy of Department of Defence

www.aaestore.com.au

Local and International Warehouses

eStore customers can quickly and easily order hardware, knowing local and international stock levels as well as the corresponding tier price.

Sign up for a free account today!

AustraliaAlbury, NSW 2640

USA East CoastMelbourne, FL 32904

Who we are.Australian Aerospace Engineering Pty Ltd (AAE) is a Part 145 Maintenance Repair and Overhaul facility, manufacturer of aeronautical products and distributor of aerospace hardware. As an Australian owned SME, AAE has a rich 32 year history of supporting Defence and industry in Australia.

Since launching the eStore in 2017 AAE has grown to become a preferred supplier for many customers across Australasia. After 10,000 shipments of hardware to over 500 customers in Australia, New Zealand and Asia, AAE has achieved 97% On-Time Delivery and over 99% accuracy. This exceptional level of customer service is underpinned by AAE’s AS9100D, AS9110C, AS9120B and ISO9001 : 2015 quality accreditations.

Create a Free Online Account

MONROEMONROEA E R O S P A C E

Australian Aerospace Engineering is an exclusive stocking distributor for Monroe Aerospace to the Australian market, for aerospace and Mil-Spec hardware.

Like AAE, Monroe Aerospace is an AS9100D & ISO 9001:2015 certified company that is committed to customer satisfaction and continuous improvement. It is a privilege to work with Monroe and their team as we strive to offer an exceptional service.

Distributorship

[email protected] | p: +61 (02) 60262614 www.aaestore.com.au

OUR MISSION

To keep our customers flying by delivering outstanding solutions across MRO,

manufacturing and parts distribution.

Customer Testimonials

“We have enjoyed an excellent working relationship with AAE. They regularly deliver to us MRO, manufacturing, product distribution services and aviation engineering solutions. AAE are a professional outfit that have delivered outstanding solutions to Pennant Australasia and have been pivotal in helping us grow our regional capability. Great job!”

Warehouse Location

AAE’s hardware warehouse is situated in Albury, NSW. Albury is a major transport hub for rail, truck and air and has over 180 commercial flights into the airport each week. This means overnight shipment can normally be achieved across Australia through all major freight carriers.

AAE is committed to customer satisfaction, continual improvement and supplying parts and services in accordance with the company’s Quality Management System Manual and Procedures (QMS).

The QMS meets the Aerospace and Defence AS9100D, AS9110C, AS9120B, ISO9001:2015 and CASA Part 145 standards.

AAE Quality Systems

“The crew at AAE has been terrific to work with. They manage a great eCommerce website and offer fantastic customer service. Thanks for your support guys!”

“The team at AAE has successfully supported Babcock with aerospace fasteners for some time now. They have great technical knowledge and offer personalised customer service. Thanks for your support!”

“The team at AAE have been crucial to our operation at Sharp Airlines. Providing excellent customer service, professional advice and often going above and beyond – particularly when sourcing unique, time-critical parts from across the globe, and delivering them on time, every time. This, coupled with an extremely helpful and friendly team (giving that personal touch), I couldn’t recommend them highly enough. Thank you guys, keep up the great work.”

Stavros Tsolakides

Projects Director – Pennant Australasia

Bryan Sharan

Warehouse & Logistics – Toll Helicopters

Phil Haua

Stores and Logistics - Sharp Airlines

Courtney Mitchell

Babcock Australasia

Company PoliciesPricingAAE uses a tier based pricing structure that offers discounted rates as a function of volume purchased. Create an online account at aaestore.com.au to view prices and stock on hand.

PaymentAAE accepts Paypal, MasterCard and VisaCard payments online. In order to keep overall prices low, there is a purchase order minimum. Refer to aaestore.com.au for the current threshold.

ShippingIn general, orders received before the afternoon cutoff time will ship the same day. Refer to aaestore.com.au for the current cutoff time. All orders received after this time will promptly ship the following business day. Large orders may ship the following day, depending on what time the order was received. Please advise at checkout whether you want the order held and consolidated, or split shipped.

For any order processed with "Customer Account" as the shipping option (including international orders) AAE will make contact to arrange the shipment, if a preferred courier account is not held on file.

PackagingThe standard packaging comes with your PO number (if supplied), part number, description, manufacturer, lot number, and our company Goods Receipt Number. Please advise if you require any additional information on packaging, or packaging to your specifications. AAE can accommodate most packaging needs. Charges may apply for packaging requirements that significantly affect the process time of the order.

Back OrdersAAE will make every effort to ship your order complete. If any items are back ordered to you, AAE will endeavour to ship those items in a timely manner. Where possible shipments will be consolidated to reduce freight costs.

CertificationManufacturer's certifications are on file for all aerospace and Mil-Spec fasteners. All parts are shipped with an AAE certificate of conformance with the lot number and/or control number. Please advise at the time of your order if you would like a copy of the manufacturer's certification shipped with your parts. AAE reserves the right to charge an administrative fee for this service.

CAGE CodeFor Australian Government customers, AAE is a Defence Recognised Supplier with cage code Z0WH1.

Acceptance / Return of MerchandiseA Return Merchandise Authorisation (RMA) report issued by AAE must accompany any returned items. No credit will be issued on any parts returned without an RMA. AAE must be notified of any discrepancies or shortages within 7 days of receipt of your shipment for a credit to be issued. Delivery of quantities within three percent (+/-3%) of requested quantities shall be deemed a fulfilled supply. Credits and RMA's will not be issued beyond 7 days after items have been received. Parts must be in the original packaging with the original quantity sold, for a credit to be given.

AAE generally does not charge a restocking fee if the parts ordered are regular stock items. Any parts brought in specifically to fill your order, if returnable, will be subject to a 50% restocking fee. Any specialty parts ordered are non-returnable.

***PRINTED POLICIES ARE SUBJECT TO REVISION WITHOUT NOTICE. PLEASE REVIEW CURRENT TERMS AND CONDITIONS ON THE WEBSITE ***

In addition to AAE’s aerospace and Mil-Spec hardware offering, AAE supplies Maintenance, Repair and Overhaul (MRO) and precision manufacturing services to Defence and commercial industry. Now, a new and exciting service offering is the manufacture and supply of Aeroquip® hose assemblies.

What else does AAE do?

[email protected] | p: +61 (02) 60262614 www.austaerospace.com

Aerospace MRO | Precision Manufacturing | Parts Distribution | Aerospace Hose Shop

CH-47F at Mount Hagen Airport during Operation PNG Assist 2018Image courtesy of Department of Defence

Contact: [email protected] | Website: www.austaerospace.com

On the 10th of Dec 2020 AAE and Eaton signed a Memorandum of Understanding to establish a TSO approved aerospace hose shop in

Australia, supplying hose assemblies and fluid conveyance products from the Aeroquip® product line. This capability within the Australasian

region will support the Australian Defence Force and commercial industry with an important sovereign capability. AAE will be approved to

manufacture and repair a wide range of low, medium and high pressure aerospace hose assemblies, tested and certified to the highest

possible quality control requirements.

"We've engaged with Eaton as they are the world-leading OEM of fluid conveyance products, and we are excited to be launching the

Aerospace Hose Shop. Having discussed this capability with our well established customer base across Defence and industry, we are

confident our Hose Shop will be a welcomed addition to our existing product and service offerings. " Viv Johnston, Sales Manager.

Why Eaton?

Eaton’s broad portfolio of hydraulic, conveyance, fuel, pneumatic, and electrical products delivers safe, reliable and efficient solutions for

aircraft, with an emphasis on lower lifecycle costs, system integration, optimized system controls and reduced weight. Eaton components

lead the industry in reliability and can be found on virtually all major commercial and military aircraft platforms. AAE is proud to be working

with Eaton in support of Australian Defence and commercial industry, supplying the known and trusted Aeroquip® product line.

AEROSPACE HOSE SHOP

Eaton products are installed on ADF platforms including the F-35 Joint Strike Fighter, Boeing CH-47 Chinook,

F/A-18 Super Hornet and Growler, KC-30A MRTT, C27J Spartan, C-17A Globemaster, Lockheed Martin C-130 Hercules,

Hawk 127 and Sikorsky S-70 Black Hawk.

Contact us today for your hose requirements!

AUSTRALIAN AEROSPACE ENGINEERNG PRODUCT LINEFLOATING CLIP NUTSFUSESGASKETSGREASE FITTINGSGROMMETSGROMMET EDGINGHARDWARE KITSHEAT SHRINK TUBINGHI-LOK® PINS AND COLLARSHI-LOK® TOOLINGHINGESHINGE PINSHUCK® RIVETSHOSEHOSE CLAMPSINDICATOR LIGHTSINSERTS - HELICOIL® - KEENSERTS® - SANDWICH PANELJO-BOLTSKLIXON® BREAKERSKNIFE SPLICESLIGHTING/BULBSLORD COWLING MOUNTSLOCKING CLIPS, PINSLYCOMING PRODUCTSMONEL RIVETSNICROPRESS® SLEEVESNIPPLE, ELECTRICALNITRILE GLOVESNUTS - AN, MS, NAS - BARREL NUTS - CASTLE NUTS - CHECK NUTS - CLIPNUTS - EB NUTS - EXHAUST NUTS - INSTRUMENT NUTS - JAM NUTS - METRIC NUTS - NYLON CAP NUTS - PIPER CLIP NUTS - SELF LOCKING NUTS - TINNERMAN® NUTS - WING NUTS - 12 POINT NUTSNUTPLATESO’RINGSPACKINGSPANEL FASTENERSPANEL INSERTS

PATCH PLATESPOP RIVETS & TOOLINGPOTTER BRUMFIELD® BREAKERSPULLEYSPULLEY GUARD PINQUARTZ LAMPSRETAINING RINGSRIVETSRING TERMINALSSAFETY WIRESCAT / SCEET HOSESCREWLOCK ASSEMBLIESSCREWS - AN, MS & NAS - DRIVE SCREWS - FILLISTER HEAD - HEX HEAD - INSTRUMENT - OHMSC - SET SCREWS - SHEET METAL - SOCKET HEAD - TAPPING - WASHER HEADSEALED BEAM LAMPSSHACKLESSILICONE COVER GASKETSSOLDER SLEEVESSOLID RIVETSSOUTHCO® FASTENERSSPACERSSPLIT PINSSPIRAL WRAPSPRING PINSSWITCH GUARDSSWITCHESTERMINAL BOARD ASSEMBLIESTERMINAL LINKSTHIMBLES, CABLESTHIXO GREASETIE WRAPSTINNERMAN® NUTSTINNERMAN® WASHERSTOGGLE SWITCHESTOOLINGTRIDAIR® PRODUCTSTURNBUCKLE HARDWAREWARNING STREAMERSWASHERSWATER DETECTORSWIREWIRE CAPS

AERODUCT DUCTINGAEROQUIP® FIRESLEEVEAEROQUIP® FITTINGSAEROQUIP® HOSEAIRCRAFT WIREAIRLOC® FASTENERSANCHOR NUTSBEARINGSBLACK BRASS SCREWSBLIND RIVET NUTS & TOOLINGBRACKETT AIR FILTERSBOLTS - AN, MS, NASBONDING JUMPERSBUSHINGSBUTT SPLICESCABLE CUTTERSCABLE HARDWARECABLE TIESCAMLOC® FASTENERSCAMLOC® PLIERSCAPLUGSCHERRY® ALL BLIND RIVETSCHERRY® RIVET TOOLINGCIRCUIT BREAKERSCLAMPSCLECO® FASTENERSCLECO® TOOLINGCLEVIS BOLTSCLEVIS PINSCLEVIS ROD ENDSCONICAL SEALSCONTINENTAL PRODUCTSCONTROL CABLECOTTER PINSCOVER GASKETSCOWLING MOUNTSCRIMP SPLICESCURTIS DRAIN VALVESDELRON® INSERTSDRILL BITSDRILL JIGS (PLATE NUT)DRILL STOPSDYKEM® CROSSCHECKDZUS® FASTENERSELECTRICAL COMPONENTSEXHAUST GASKETSEYE BOLTSFILLISTER HEAD SCREWSFITTINGS - AN & MS - AEROQUIP® - NYLON & BRASS

The ® symbol used throughout this catalogue refers to product names covered by a registered trademark

Australian Warehouse USA WarehouseMelbourne, FL 32904

3V FASTENERSAADOXABBOTTACCURATE BUSHINGADEL WIGGINSAEROFIT PRODUCTSAEROSPACE PRODUCTSAEROTECH FASTENERSAEROSPACE RIVETAIRFASCOAIR INDUSTRIESALARINALCOAALEMITEALLFASTALL-POWER MFGALLSTATES RUBBERAMERIFASTANATASEANILLOARVANAURORA BEARINGAUTOMATIC SCREWAVDEL CHERRY TEXTRONAVIBANK MFGAVKAWSUM OUTCOMESB&B SPECIALTIESB&E MFGBASTIONBELL MEMPHISBLANC AEROBREEZEBRISTOL INDUSTRIESBURNDYBUSSMANCALIFORNIA SCREWCAM-TECH INDUSTRIESCAPLUGCATAMOUNTCBSCIRCUIT SYSTEMSCLECOCRESCENTDEUTSCHDFCIDOWELS, PINS & SHAFTSDZUSEATON

MANUFACTURER’S DIRECTORY

Australian Aerospace Engineering has manufacturer’s certification available on request for all Aerospace and Mil-Spec hardware.

Albury, NSW, 2640

EMPIREESNA/SPSETC MOLEXF.I.T.FABERFAFNIR BEARINGFASTENAIRFREEMAN COMPANYGENIEGERALD DANIELGLENAIRGREERGUARDIANHEARTLAND PRECISIONHEIMHELI-COILHI-SHEARHYDRO FITTINGHUCK (ALCOA)IDEAL FASTENERSINDIANA AIRCRAFT HARDWAREINLAND MACHINE COMPANYINTERNATIONAL SEALITW PRO BRANDSJ&M PRODUCTSKATO FASTENING SYSTEMSKAYNARKLIXONLADEAULFCLINREAD NORTHBRIDGELONG-LOKLOOSMAGNA-AIREMARSONMARTIN COMPANYMICRO PLASTICSMICRODOT INSERTMICROSWITCHMINI-MACMINOR RUBBERMOELLERMONADNOCKMONOGRAMM.R.L.NATIONAL RIVETNEW HAMPSHIRE BEARINGNMB TECHNOLOGIESNYLON MOLDING

OBM (OTT BROS)OHIO GASKETPAMCOPAOLO ASTORIPANDUITPARKER HANNIFINPB FASTENERSPERMASWAGE / NELSON/HKPILGRIM SCREWPOPPOTTER & BRUMFIELDPRECISION FORM RIVETPRECISION SHAPESR&B ELECTRONICSRALMARKRAYCHEMRBC-HEIM BEARINGRISCO, INC.ROSANSATURN FASTENERSSCHATZ BEARINGSCOVILLSCREWCORPSEASTROMSESCOSHAWSHUR-LOCKSIMMONDS / MECAEROSKY MFGSOUTHCOSPIROLSPSSTELLEX BANDY HINGESTRATOFLEXSUPERIOR WASHERTEXAS INSTRUMENTSTHOMAS & BETTSTIMKEN SUPER PRECISIONTINNERMANTORRINGTON COTRIDAIRTRI-FITTING MFGTYTON CORPUMPCOVAN PETTYVOISHANWEST COAST LOCKWASHERWESTERN WIREYOUNG ENGINEERS

NOTES

_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

NOTES

_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Aerospace Hardware and SuppliesAustralian Aerospace Engineering Pty Ltd

Data in this catalogue is for reference only. Data accuracy cannot be guaranteed. Data in this catalogue is for reference only. Data accuracy cannot be guaranteed.

CORROSION RESISTANT(10 - 32 Thread)

AN3C#A (Undrilled Shank)AN3C# (Drilled Shank)

AN3C AIRFRAME BOLT

AN3-#A (Undrilled Shank)AN3-# (Drilled Shank)

AN3 AIRFRAME BOLT(10 - 32 Thread)

DRILLED HEAD(10 - 32 Thread)

AN3H AIRFRAME BOLT

AN3H AN3HLength Grip Undrilled Drilled

DESCRIPTION

3A

4A5A

6A

7A

10A

11A

12A

13A14A

15A 16A

34

5

67

10

11

1213

14

1516

15/3217/32

21/3225/32

29/321 - 1/32

1 - 5/32

1 - 9/321 - 13/321 - 17/32

1 - 21/321 - 25/32

1/16

1/81/4

3/81/2

5/8

3/47/8

1

1 - 1/8

1 - 1/41 - 3/8

AN3C AN3CLength Grip Undrilled Drilled

DESCRIPTION

3A4A5A6A

7A

10A 11A 12A

13A

14A 15A 16A

3456

71011

12

13

1415

16

1/16

1/81/43/81/2

5/8

3/47/8

1

1 - 1/8

1 - 1/4

1 - 3/8

15/32

17/3221/3225/32

29/32

1 - 1/321 - 5/32

1 - 9/321 - 13/32

1 - 17/32

1 - 21/32

1 - 25/32

AN3H#A (Undrilled Shank)AN3H# (Drilled Shank)

1/161/8

1/43/8

1/25/8

3/4

7/81

1 - 1/81 - 1/4

1 - 3/81 - 1/2

1 - 5/81 - 3/41 - 7/8

2

2 - 1/82 - 1/4

2 - 3/82 - 1/2

2 - 5/8

2 - 3/42 - 7/8

3

3 - 1/8

3 - 1/43 - 3/83 - 1/2

3 - 5/83 - 3/4

3 - 7/84

4 - 1/84 - 1/4

15/32

17/3221/3225/32

29/32

1 - 1/321 - 5/32

1 - 9/321 - 13/32

1 - 17/321 - 21/32

1 - 25/321 - 29/322 - 1/322 - 5/322 - 9/322 - 13/32

2 - 17/32

2 - 21/322 - 25/322 - 29/32

3 - 1/323 - 5/32

3 - 9/323 - 13/32

3 - 17/32

3 - 21/323 - 25/32

3 - 29/324 - 1/324 - 5/32

4 - 9/324 - 13/32

4 - 17/324 - 21/32

3A4A5A

6A

10A11A

12A13A14A

15A

16A17A20A

21A22A

23A24A

25A26A27A30A

31A32A

33A34A

35A36A

37A40A

41A42A43A44A

45A

7A

3456

101112131415161720212223242526273031323334353637404142434445

7

Length GripAN3-

Undrilled DrilledDESCRIPTION AN3-

[email protected] Phone + 61 (02) 60262614 www.aaestore.com.au 12


Data in this catalogue is for reference only. Data accuracy cannot be guaranteed.

AN4 AIRFRAME BOLT(1/4-28 Thread)


1/161/163/165/167/169/16

11/1613/1615/16

1 - 1/161 - 3/161 - 5/161 - 7/161 - 9/16

1 - 11/161 - 13/161 - 15/162 - 1/162 - 3/162 - 5/162 - 7/162 - 9/16

2 - 11/162 - 13/162 - 15/163 - 1/163 - 3/163 - 5/163 - 7/163 - 9/16

3 - 11/163 - 13/163 - 15/164 - 1/164 - 3/164 - 5/164 - 7/164 - 9/16

4 - 11/164 - 13/164 - 15/165 - 1/165 - 3/165 - 5/165 - 7/165 - 9/16

5 - 11/165 - 13/16

15/3217/3221/3225/3229/32

1 - 1/321 - 5/321 - 9/32

1 - 13/321 - 17/321 - 21/321 - 25/321 - 29/322 - 1/322 - 5/322 - 9/32

2 - 13/322 - 17/322 - 21/322 - 25/322 - 29/323 - 1/323 - 5/323 - 9/32

3 - 13/323 - 17/323 - 21/323 - 25/323 - 29/324 - 1/324 - 5/324 - 9/32

4 - 13/324 - 17/324 - 21/324 - 25/324 - 29/325 - 1/325 - 5/325 - 9/32

5 - 13/325 - 17/325 - 21/325 - 25/325 - 29/326 - 1/326 - 5/326 - 9/32

3A4A5A6A7A

10A11A12A13A14A15A16A17A20A21A22A23A24A25A26A27A30A31A32A33A34A35A36A37A40A41A42A43A44A45A46A47A50A51A52A53A54A55A56A57A60A61A62A

AN4-GripLength Undrilled Drilled

DESCRIPTION AN4-

34567

10111213141516172021222324252627303132333435363740414243444546475051525354555657606162

AN4H AIRFRAME BOLT

(1/4-28 Thread)

AN4H#A (Undrilled Shank)AN4H# (Drilled Shank)

26A27A30A

3A4A5A6A7A

10A11A12A13A14A15A16A17A20A21A22A23A24A25A

2 - 5/162-7/162-9/16

1/161/163/165/167/169/16

11/1613/1615/16

1 - 1/161 - 3/161 - 5/161 - 7/161 - 9/16

1 - 11/161 - 13/161 - 15/162 - 1/162 - 3/16

2 - 25/322 - 29/323 - 1/32

15/3217/3221/3225/3229/32

1 - 1/321 - 5/321 - 9/32

1 - 13/321 - 17/321 - 21/321 - 25/321 - 29/322 - 1/322 - 5/322 - 9/32

2 - 13/322 - 17/322 - 21/32

Grip UndrilledDESCRIPTION AN4H#A

Length

AN4C AIRFRAME BOLTCORROSION RESISTANT(1/4-28 Thread)

AN4C#A (Undrilled Shank)AN4C# (Drilled Shank)

Length UndrilledDESCRIPTION AN4C

DrilledAN4C

Grip3A4A5A6A7A

10A11A12A13A14A15A16A17A20A21A22A23A24A26A

1/161/163/165/167/169/16

11/1613/1615/16

1 - 1/161 - 3/161 - 5/161 - 7/161 - 9/16

1 - 11/161 - 13/161 - 15/162 - 1/162 - 5/16

15/3217/3221/3225/3229/32

1 - 1/321 - 5/321 - 9/32

1 - 13/321 - 17/321 - 21/321 - 25/321 - 29/322 - 1/322 - 5/322 - 9/32

2 - 13/322 - 17/322 - 25/32

34567

1011121314151617202122232426

DRILLED HEAD




AN6H#A (3/8-24 Thread)Drilled Head, Undrilled ShankAN6C#A (3/8-24 Thread)Corrosion Resistant Steel



45/6453/6461/64

1 - 5/641 - 13/641 - 21/641 - 29/641 - 37/641 - 45/641 - 53/641 - 61/642 - 5/64

2 - 13/642 - 21/642 - 29/642 - 37/642 - 45/642 - 53/642 - 61/643 - 5/64

3 - 13/643 - 21/643 - 29/643 - 37/643 - 45/643 - 53/643 - 61/644 - 5/64

4 - 13/644 - 21/644 - 29/644 - 37/644 - 45/644 - 53/644 - 61/645 - 5/64

5 - 13/645 - 21/645 - 29/645 - 37/645 - 45/645 - 53/645 - 61/646 - 5/64

6 - 13/646 - 29/64

5A6A7A

10A11A12A13A14A15A16A17A20A21A22A23A24A25A26A27A30A31A32A33A34A35A36A37A40A41A42A43A44A45A46A47A50A51A52A53A54A55A56A57A60A61A63A

Length Grip Undrilled DrilledDESCRIPTION AN6- AN6-

567

10111213141516172021222324252627303132333435363740414243444546475051525354555657606163

1/163/165/167/169/16

11/1613/1615/16

1 - 1/161 - 3/161 - 5/161 - 7/161 - 9/16

1 - 11/161 - 13/161 - 15/162 - 1/162 - 3/162 - 5/162 - 7/162 - 9/16

2 - 11/162 - 13/162 - 15/163 - 1/163 - 3/163 - 5/163 - 7/163 - 9/16

3 - 11/163 - 13/163 - 15/164 - 1/164 - 3/164 - 5/164 - 7/164 - 9/16

4 - 11/164 - 13/164 - 15/165 - 1/165 - 3/165 - 5/165 - 7/165 - 9/16

5 - 13/16



AN5H#A (5/16-24 Thread)Drilled Head, Undrilled ShankAN5C#A (5/16-24 Thread)Corrosion Resistant Steel


4A5A6A7A

10A11A12A13A14A15A16A17A20A21A22A23A24A25A26A27A30A31A32A33A34A35A36A37A40A41A42A43A44A45A46A47A50A51A52A53A54A55A56A57A

19/3223/3227/3231/32

1 - 3/321 - 7/32

1 - 11/321 - 15/321 - 19/321 - 23/321 - 27/321 - 31/322 - 3/322 - 7/32

2 - 11/322 - 15/322 - 19/322 - 23/322 - 27/322 - 31/323 - 3/323 - 7/32

3 - 11/323 - 15/323 - 19/323 - 23/323 - 27/323 - 31/324 - 3/324 - 7/32

4 - 11/324 - 15/324 - 19/324 - 23/324 - 27/324 - 31/325 - 3/325 - 7/32

5 - 11/325 - 15/325 - 19/325 - 23/325 - 27/325 - 31/32

1/163/165/167/169/16

11/1613/1615/16

1 - 1/161 - 3/161 - 5/161 - 7/161 - 9/16

1 - 11/161 - 13/161 - 15/162 - 1/162 - 3/162 - 5/162 - 7/162 - 9/16

2 - 11/162 - 13/162 - 15/163 - 1/163 - 3/163 - 5/163 - 7/163 - 9/16

3 - 11/163 - 13/163 - 15/164 - 1/164 - 3/164 - 5/164 - 7/164 - 9/16

4 - 11/164 - 13/164 - 15/165 - 1/165 - 3/165 - 5/165 - 7/16

4567

10111213141516172021222324252627303132333435363740414243444546475051525354555657








11A12A13A14A15A16A17A20A21A22A23A24A25A26A27A30A31A32A33A34A35A36A37A40A41A42A43A44A45A46A47A50A51A52A

7/169/16

11/1613/1615/16

1 - 1/161 - 3/161 - 5/161 - 7/161 - 9/16

1 - 11/161 - 13/161 - 15/162 - 1/162 - 3/162 - 5/162 - 7/162 - 9/16

2 - 11/162 - 13/162 - 15/163 - 1/163 - 3/163 - 5/163 - 7/163 - 9/16

3 - 11/163 - 13/163 - 15/164 - 1/164 - 3/164 - 5/164 - 7/164 - 9/16


11121314151617202122232425262730313233343536374041424344454647505152

1 - 7/321 - 11/321 - 15/321 - 19/321 - 23/321 - 27/321 - 31/322 - 3/322 - 7/32

2 - 11/322 - 15/322 - 19/322 - 23/322 - 27/322 - 31/323 - 3/323 - 7/32

3 - 11/323 - 15/323 - 19/323 - 23/323 - 27/323 - 31/324 - 3/324 - 7/32

4 - 11/324 - 15/324 - 19/324 - 23/324 - 27/324 - 31/325 - 3/325 - 7/32

5 - 11/32

1 - 3/321 - 7/32

1 - 11/321 - 15/321 - 19/321 - 23/321 - 27/321 - 31/322 - 3/322 - 7/32

2 - 11/322 - 15/322 - 19/322 - 23/322 - 27/322 - 31/323 - 3/323 - 7/32

3 - 11/323 - 15/323 - 19/323 - 23/323 - 27/323 - 31/324 - 3/324 - 7/32

4 - 11/324 - 15/324 - 19/324 - 23/324 - 27/324 - 31/325 - 3/325 - 7/32

5 - 11/325 - 15/325 - 19/325 - 23/325 - 27/325 - 31/326 - 3/32

1011121314151617202122232425262730313233343536374041424344454647505152535455565760

7/169/16

11/1613/1615/16

1 - 1/161 - 3/161 - 5/161 - 7/161 - 9/16

1 - 11/161 - 13/161 - 15/162 - 1/162 - 3/162 - 5/162 - 7/162 - 9/16

2 - 11/162 - 13/162 - 15/163 - 1/163 - 3/163 - 5/163 - 7/163 - 9/16

3 - 11/163 - 13/163 - 15/164 - 1/164 - 3/164 - 5/164 - 7/164 - 9/16

4 - 11/164 - 13/164 - 15/165 - 1/165 - 3/165 - 5/165 - 7/16


10A11A12A13A14A15A16A17A20A21A22A23A24A25A26A27A30A31A32A33A34A35A36A37A40A41A42A43A44A45A46A47A50A51A52A53A54A55A56A57A60A




15/3217/3221/3225/3229/32

1 - 1/321 - 5/321 - 9/32

1 - 13/321 - 17/321 - 21/321 - 25/321 - 29/322 - 1/32

AN173 Close Tolerance Bolt(.1900-32 Thread)

34567

101112131415161720

1/161/81/43/81/25/83/47/8

11 - 1/81 - 1/41 - 3/81 - 1/21 - 5/8

3A4A5A6A7A

10A11A12A13A14A15A16A17A20A

AN173-Length Undrilled Drilled

DESCRIPTION AN173-Grip

1011121314151617202122232425262730313233

AN175-GripLength Undrilled Drilled

DESCRIPTION AN175-

1 - 3/321 - 7/32

1 - 11/321 - 15/321 - 19/321 - 23/321 - 27/321 - 31/322 - 3/322 - 7/32

2 - 11/322 - 15/322 - 19/322 - 23/322 - 27/322 - 31/323 - 3/323 - 7/32

3 - 11/323 - 15/32

9/1611/1613/1615/16

1 - 1/161 - 3/161 - 5/161 - 7/161 - 9/16

1 - 11/161 - 13/161 - 15/162 - 1/162 - 3/162 - 5/162 - 7/162 - 9/16

2 - 11/162 - 13/162 - 15/16


10A11A12A13A14A15A16A17A20A21A22A23A24A25A26A27A30A31A32A33A


567

10111213141516172021222324252627303132333435

21/3225/3229/32

1 - 1/321 - 5/321 - 9/32

1 - 13/321 - 17/321 - 21/321 - 25/321 - 29/322 - 1/322 - 5/322 - 9/32

2 - 13/322 - 17/322 - 21/322 - 25/322 - 29/323 - 1/323 - 5/323 - 9/32

3 - 13/323 - 17/323 - 21/32

3/165/167/169/16

11/1613/1615/16

1 - 1/161 - 3/161 - 5/161 - 7/161 - 9/16

1 - 11/161 - 13/161 - 15/162 - 1/162 - 3/162 - 5/162 - 7/162 - 9/16

2 - 11/162 - 13/162 - 15/163 - 1/163 - 3/16

5A6A7A

10A11A12A13A14A15A16A17A20A21A22A23A24A25A26A27A30A31A32A33A34A35A



Special Note:


10A11A12A13A14A15A16A17A20A21A22A23A

1 - 5/641 - 13/641 - 21/641 - 29/641 - 37/641 - 45/641 - 53/641 - 61/642 - 5/64

2 - 13/642 - 21/642 - 29/64

7/169/16

11/1613/1615/16

1 - 1/161 - 3/161 - 5/161 - 7/161 - 9/16

1 - 11/161 - 13/16

101112131415161720212223



Uncommon AN175 & AN176 bolts may require a leadtime and factory minimums. Stock availability may be subject to a prior sale and significant price fluctuations.








EYE BOLTAN42B (10-32 UNF-3A Thread)AN43B (1/4-28 UNF-3A Thread)"A" Following Dash # Indicates Undrilled Shank

Grip Length---

17/3221/3225/3229/32

1 - 1/321 - 5/321 - 9/32

1 - 13/321 - 17/321 - 21/321 - 25/321 - 29/322 - 1/32

---1/163/165/167/169/16

11/1613/1615/16

1 - 1/161 - 3/161 - 5/161 - 7/161 - 9/16

Length15/3217/3221/3225/3229/32

1 - 1/321 - 5/321 - 9/32

1 - 13/321 - 17/321 - 21/321 - 25/321 - 29/322 - 1/32

1/61/81/43/81/25/83/47/8

11 - 1/81 - 1/41 - 3/81 - 1/21 -5/8

3A4A5A6A7A

10A11A12A13A14A15A16A17A20A

GripAN42B AN43B3A4A5A6A7A

10A11A12A13A14A15A16A17A20A

SPECIALTY CLOSE TOLERANCE BOLTS

"A" Following Dash Number Indicates Undrilled Shank"C" Following Basic Part Number Indicates Corrosion Resistant Steel"H" Following Basic Part Number Indicates Drilled Head

Part #Length GripAN173C5

AN173C5AAN173C6A

AN173C10AAN173C12AAN174C7AAN174H5AAN174H6AAN174H7A

AN174H10AAN174H11AAN174H12AAN174H13AAN174H14AAN174H16AAN174H22AAN175C32A

AN176-26AN176-42AN176-50AN176-51

AN176H7AAN177-22AN177-26AN177-27AN177-33AN177-37AN177-42AN178-26AN178-40

5/85/83/4

11 - 1/4

7/85/83/47/8

11 - 1/81 - 1/41 - 3/8

1 - 17/321 - 3/42 - 1/4

3 - 7/322 - 9/32

4 - 11/325 - 3/64

5 - 11/649/32

2 - 5/162 - 13/162 - 15/163 - 7/16

3 - 15/164 - 5/16

2 - 13/164 - 1/16

1/41/43/85/87/8

7/163/165/167/169/16

11/1613/1615/16

1 - 1/161 - 5/16

1 - 13/162 - 11/162 - 3/16

3 - 11/164 - 7/164 - 9/16

3/161 - 11/162 - 3/162 - 5/16

2 - 13/163 - 5/16

3 - 11/162 - 1/163 - 5/16




CLEVIS PIN

Materials: “C” - CAD II Plated Steel, “R” - Chrome Plated Corrosion Resistant Steel

.219

.281

.344

.406

.469

.531

.594

.656

.719

.781

.844

.906

.9691.0311.0941.1561.2191.2811.3441.4061.4691.5311.6561.7191.7811.969

2C72C9

2C112C132C152C172C192C212C232C252C272C292C312C332C352C372C392C412C432C452C472C492C532C552C572C63

1C71C9

1C111C131C151C171C191C211C231C251C271C291C311C331C351C371C391C411C431C451C471C491C531C551C571C63

MS20392 1/8” Dia. -- --3C113C133C153C173C193C213C233C253C273C293C313C333C353C373C393C413C433C453C473C493C533C553C573C63

MS20392 1/4” Dia. MS20392 3/16” Dia.

CLEVIS BOLT

17/3219/3221/3223/3225/3227/3229/3231/32

1 - 1/321 - 3/321 - 5/321 - 7/321 - 9/32

1 - 11/321 - 13/321 - 15/321 - 17/321 - 19/321 - 21/321 - 23/321 - 27/321 - 31/322 - 17/32

3/161/4

5/163/ 8

7/161/2

9/165/ 8

11/163/4

13/167/ 8

15/161

1 - 1/161 - 1/8

1 - 3/161 - 1/4

1 - 5/161 - 3/81 - 1/21 - 5/8

2 - 3/16

8A9A

10A11A12A13A14A15A16A17A18A19A20A21A22A23A24A25A26A27A29A31A40A

89

101112131415161718192021222324252627293140

8A9A

10A11A12A13A14A15A16A17A18A19A20A21A22A23A24A25A26A27A29A31A40A

89

101112131415161718192021222324252627293140

AN24-AN23-Length GripUndrilledDrilledUndrilled Drilled

P/N Examples: AN23-#A (10-32 Undrilled Shank), AN24-# (1/4-28 Drilled Shank)

“Effective Length” measured from under the head to the top of the shank hole

AN21 (#6 Dia.) thru AN37 (1” Dia.)




NAS6204 Close Tolerance Bolt(Short .2500-28 Thread)

.062

.125

.188

.250

.312

.375

.438

.500

.562

.625

.688

.750

.812

.875

.9381.0001.0621.1251.1881.2501.3121.3751.4381.5001.5621.6251.6881.7501.8121.8751.9382.0002.1252.2502.3752.5002.6252.7502.8753.0003.1253.2503.3753.500

1D2D3D4D5D6D7D8D9D

10D11D12D13D14D15D16D17D18D19D20D21D22D23D24D25D26D27D28D29D30D31D32D34D36D38D40D42D44D46D48D50D52D54D56D

Supersedes NAS464P4 and NAS1104 Series

NAS6204-Grip ± .010Length Undrilled Drilled

Description NAS6204-

123456789

1011121314151617181920212223242526272829303132343638404244464850525456

.432

.495

.558

.620

.682

.745

.808

.870

.932

.9951.0581.1201.1821.2451.3081.3701.4321.4951.5581.6201.6821.7451.8081.8701.9321.9952.0582.1202.1822.2452.3082.3702.4952.6202.7452.8702.9953.1203.2453.3703.4953.6203.7453.870


NAS6203-# (Undrilled) NAS6203-#H (Drilled Head) NAS6203-#D (Drilled Shank)

.062

.125

.188

.250

.312

.375

.438

.500

.562

.625

.688

.750

.812

.875

.9381.0001.0621.1251.1881.2501.3121.3751.4381.5001.5621.6251.6881.7501.8121.8751.9382.0002.1252.2502.375

.385

.448

.511

.573

.635

.698

.761

.823

.885

.9481.0111.0731.1351.1981.2611.3231.3851.4481.5111.5731.6351.6981.7611.8231.8851.9482.0112.0732.1352.1982.2612.3232.4482.5732.698

Supersedes NAS464P3 and NAS1103 Series

Grip ± .010NAS6203-

123456789

1011121314151617181920212223242526272829303132343638

1D2D3D4D5D6D7D8D9D

10D11D12D13D14D15D16D17D18D19D20D21D22D23D24D25D26D27D28D29D30D31D32D34D36D38D

Description NAS6203-Length Undrilled Drilled






Supersedes NAS464P6 Series and NAS1106 Series

3456789

101112131415161718192021222324252627282930313234363840

.188

.250

.312

.375

.438

.500

.562

.625

.688

.750

.812

.875

.9381.0001.0621.1251.1881.2501.3121.3751.4381.5001.5621.6251.6881.7501.8121.8751.9382.0002.1252.2502.3752.500

.642

.704

.766

.829

.892

.9541.0161.0791.1421.2041.2661.3291.3921.4541.5161.5791.6421.7041.7661.8291.8921.9542.0162.0792.1422.2042.2662.3292.3922.4542.5792.7042.8292.954

NAS6206-Grip ±.010Length Undrilled Drilled


3D4D5D6D7D8D9D

10D11D12D13D14D15D16D17D18D19D20D21D22D23D24D25D26D27D28D29D30D31D32D34D36D38D40D

Supersedes NAS464P5 Series and NAS1105 Series


NAS6205-Grip ±.010Length Undrilled Drilled


.563

.626

.688

.750

.813

.876

.9381.0001.0631.1261.1881.2501.3131.3761.4381.5001.5631.6261.6881.7501.8131.8761.9382.0002.0632.1262.1882.2502.3132.3762.4382.5632.6882.8132.938

.125

.188

.250

.312

.375

.438

.500

.562

.625

.688

.750

.812

.875

.9381.0001.0621.1251.1881.2501.3121.3751.4381.5001.5621.6251.6881.7501.8121.8751.9382.0002.1252.2502.3752.500

23456789

101112131415161718192021222324252627282930313234363840

2D3D4D5D6D7D8D9D

10D11D12D13D14D15D16D17D18D19D20D21D22D23D24D25D26D27D28D29D30D31D32D34D36D38D40D






Supersedes NAS1303 Series

123456789

1011121314151617181920212223242526272829303132343638

NAS6603 Close Tolerance Bolt(Long .1900-32 Thread)

.062

.125

.188

.250

.312

.375

.438

.500

.562

.625

.688

.750

.812

.875

.9381.0001.0621.1251.1881.2501.3121.3751.4381.5001.5621.6251.6881.7501.8121.8751.9382.0002.1252.2502.375

.407

.470

.533

.595

.657

.720

.783

.845

.907

.9701.0331.0951.1571.2201.2831.3451.40714701.5331.5951.6571.7201.7831.8451.9071.9702.0332.0952.1572.2202.2832.3452.4702.5952.720

D1D2D3D4D5D6D7D8D9

D10D11D12D13D14D15D16D17D18D19D20D21D22D23D24D25D26D27D28D29D30D31D32D34D36D38

NAS6603-Grip ± .010Length

Description NAS6603Undrilled Drilled


123456789

1011121314151617181920212223242526272829303132343638


.062

.125

.188

.250

.312

.375

.438

.500

.562

.625

.688

.750

.812

.875

.9381.0001.0621.1251.1881.2501.3121.3751.4381.5001.5621.6251.6881.7501.8121.8751.9382.0002.1252.2502.375

.487

.550

.613

.675

.737

.800

.863

.925

.9871.0501.1131.1751.2371.3001.3641.4251.4871.5501.6131.6751.7371.8001.8631.9251.9872.0502.1132.1752.2372.3002.3632.4252.5502.6752.800



D1D2D3D4D5D6D7D8D9

D10D11D12D13D14D15D16D17D18D19D20D21D22D23D24D25D26D27D28D29D30D31D32D34D36D38

NAS6604-# (Undrilled) NAS6604H# (Drilled Head) NAS6604D# (Drilled Shank)







.890

.9541.0161.0781.1401.2031.2661.3281.3901.4531.5161.5781.6401.7031.7661.8281.8901.9532.0162.0782.1402.2032.2662.3282.3902.4532.5162.5782.7032.8282.9533.016

.312

.375

.438

.500

.562

.625

.688

.750

.812

.875

.9381.0001.0621.1251.1881.2501.3121.3751.4381.5001.5621.6251.6881.7501.8121.8751.9382.0002.1252.2502.3752.438

56789

101112131415161718192021222324252627282930313234363839

D5D6D7D8D9

D10D11D12D13D14D15D16D17D18D19D20D21D22D23D24D25D26D27D28D29D30D31D32D34D36D38D39


Description NAS6606DrilledUndrilled



.594

.657

.719

.781

.844

.907

.9691.0311.0941.1571.2191.2811.3441.4071.4691.5311.5941.6571.7191.7811.8441.9071.9692.0312.0942.1572.2192.2812.3442.4072.4692.5942.7192.8442.969

.125

.188

.250

.312

.375

.438

.500

.562

.625

.688

.750

.812

.875

.9381.0001.0621.1251.1881.2501.3121.3751.4381.5001.5621.6251.6881.7501.8121.8751.9382.0002.1252.2502.3752.500

23456789

101112131415161718192021222324252627282930313234363840

D2D3D4D5D6D7D8D9

D10D11D12D13D14D15D16D17D18D19D20D21D22D23D24D25D26D27D28D29D30D31D32D34D36D38D40








NAS1578 FLAT PAN HEAD BOLT “A” Following Basic Part # Indicates Alloy Steel“C” Following Basic Part # Indicates A-286 Corrosion Resistant“P” At the end of the #, Indicates type II, Class 2 Cadmium PlatingOffset Cruciform Recess per MS14191

Grip ± .010C3T2C3T3C3T4C3T5C3T6C3T7C3T8C3T9

C3T10C3T11C3T12

.125

.187

.250

.312

.375

.438

.500

.562

.625

.688

.750

NAS1578NAS1578.487.549.613.675.738.801.863.925.988

1.0511.113

LengthA3T2A3T3A3T4A3T5A3T6A3T7A3T8A3T9

A3T10A3T11A3T12

Basic Part Number (10-32 Dia.)

NAS1580 FLUSH HEAD BOLT 100O

“A” Following Basic Part # Indicates Alloy Steel“C” Following Basic Part # Indicates A-286 Corrosion Resistant“P” At the end of the #, Indicates type II, Class 2 Cadmium PlatingOffset Cruciform Recess per MS14191

NAS1580.125.187.250.312.375.438.500.562.625

Grip ± .010 0851SAN0851SANLength.487.549.613.675.738.801.863.925.988

A3T2A3T3A3T4A3T5A3T6A3T7A3T8A3T9

A3T10

C3T2PC3T3PC3T4PC3T5PC3T6P

------------

Basic Part Number (10-32 Dia.)

C3T2C3T3C3T4C3T5C3T6C3T7C3T8C3T9

C3T10NAS1581 FLUSH REDUCED HEAD BOLT 100O “F” Following Basic Part # Indicates Alloy Steel“C” Following Basic Part # Indicates A-286 Corrosion Resistant“P” At the end of the #, Indicates type II, Class 2 Cadmium PlatingOffset Cruciform Recess per MS14191

.125

.187

.250

.312

.375

.438

.500

.562

.625

.688

.750

.875

NAS1581 Basic Part Number (10-32 Dia.)Length

.487

.549

.613

.675

.738

.801

.863

.925

.9881.0511.1131.238

F3T2F3T3F3T4F3T5F3T6F3T7F3T8F3T9

F3T10F3T11F3T12F3T14

C3T2C3T3C3T4C3T5C3T6C3T7C3T8C3T9

C3T10C3T11C3T12C3T14

C3T2PC3T3PC3T4PC3T5PC3T6P

---------------------

NAS1581Grip ± .010

NAS1581




MS20004 thru MS20006 Internal Wrenching BoltReplaces NAS144, NAS145, NAS146

468

101214161820222426283032

.250

.375

.500

.625

.750

.8751.0001.1251.2501.3751.5001.6251.7501.8752.000

.750

.8751.0001.1251.2501.3751.5001.6251.7501.8752.0002.1252.2502.3752.500

---.938

1.0621.1881.3121.4381.5621.6881.8121.9382.0622.1882.3122.4382.562

---1.0621.1881.3121.4381.5621.6881.8121.9382.0622.1882.3122.4382.5622.688

MS200041/4-28

MS200063/8-24

Basic Part #, Thread & Total LengthGrip ± .010Dash # MS20005

5/16-24

* See note at bottom of this page

MS21250 External Wrenching Bolt12 Point Head 180 KSI Strength

.3750-24.3125-24.2500-28.1900-32Thread, First Dash # & Total Length

.375

.500

.625

.750

.8751.0001.1251.2501.3751.500

.815

.9401.0651.1901.3151.4401.5651.6901.8151.940

1.0201.1451.2701.3951.5201.6451.7701.8952.0202.145

.9741.0991.2241.3491.4741.5991.7241.8491.9742.099

.8871.0121.1371.2621.3871.5121.6371.7621.8872.012

MS21250Second Dash #

006008010012014016018020022024

-03 -04 -05 -06Grip ± .010

* See note at bottom of this page

68

1012141618202224

.375

.500

.625

.750

.8751.0001.1251.2501.3751.500

.860

.9651.1101.2351.3601.4851.6101.7351.8601.985

.9471.0721.1971.3221.4471.5721.6971.8221.9472.072

.9941.1191.2441.3691.4941.6191.7441.8691.9942.119

NAS624-.2500-28

NAS626-.3750-24

GripDash #

NAS624 thru NAS626 External Wrenching Bolt12 Point Head, 180 KSI Strength

NAS626-.3750-24

Basic Part #, Thread & Total Length* See note at bottom of this page

* Suggested nuts - NAS1804, NAS1805, 42FLW & 47FLW (see page 115, 116)

Example P/N MS21250-04016 (1/4-28 Thread with 1.000” Grip)




MS9033

12 Point Machine BoltHeat Resistant Steel

LengthMS9033 GripMS9033 (.1900 - 32 Dia.)

.438

.500

.562

.625

.688

.750

.812

.875

---------------

.125

.188

.250

-05-06-07-08-09-10-11-12

MS9432 Tee Head BoltAMS 5735,Chamfered

MS9432 (.1900- 32 Dia.)GripLengthMS9432

-04-05-06-07-08-09-10

.375

.438

.500

.562

.625

.688

.750

.114 - .134

.114 - .134

.114 - .134

.114 - .134

.114 - .134

.114 - .134

.114 - .134

MS9489

Machine BoltHexagon Head

Length GripMS9489MS9489 (.1900 - 32 Dia.)

-05-06-07-08-09-10-11-12

-04

-13-14-15

.375

.438

.500

.562

.625

.688

.750

.812

.875

.9381.0001.062

.072 - .092

.072 - .092

.072 - .092

.072 - .092

.072 - .092

.072 - .092

.072 - .020

.122 - .182

.185 - .245

.248 - .308

.310 - .370

.372 - .432

.312

.375

.438

.500

.562

.625

.688

.750

.812

.875

.9381.000

MS9556

12 Point Machine Bolt,Extended Washer Head

Length GripMS9556MS9556 (.1900 - 32 Dia.)

-03-04-05-06-07-08-09-10-11-12-13-14

.072-.092

.072-.120

.122-.182

.185-.245

.248-.308

.310-.370

.072-.092

.072-.092

.072-.092

.072-.092

.072-.092

.072-.092

MS9565

MS9565 GripLengthMS9565 (.1900-32 Dia.)

12 Point Machine BoltDrilled & Extended Washer Head

-03-04-05-06-07-08-09-10

.312

.375

.438

.500

.562

.625

.688

.750

.072-.092

.072-.120

.072-.092

.072-.092

.072-.092

.072-.092

.072-.092

.072-.092

MS9696

MS9696

12 Point Machine Bolt, Corrosion and Heat Resistant SteelExtended Washer Head

MS9696 (.1900- 32 Dia.)GripLength

-04-05-06-07-08-09-10-11

.375

.438

.500

.562

.625

.688

.750

.812.072-.120.122-.182

.072-.092

.072-.092

.072-.092

.072-.092

.072-.092

.072-.092




NAS333, NAS334

100o Close Tolerance Bolt

CPA indicates Plated Phillips RecessAdd -5 after last Dash # to indicateLength & Grip .062 Longer than Designated by DASH #

DASH# Length

---.188.312.438.562.688.812.938

1.062

LengthNAS333 NAS334

.531

.656

.781

.9061.0311.1561.2811.4061.531

.125

.250

.375

.500

.625

.750

.8751.0001.125

---.657.781.907

1.0311.1571.2811.4071.531

GripGrip-4-5-6-7

-10-11-12-13-14

.1900-32 .2500-28

NAS428

Crowned Hexagon Head Bolt,Adjusting“K” Indicates Slotted Shank“KH” Indicates Slotted Shank & Drilled Head

NAS428-NAS428-Length .1900-32 .2500-28

3A43A53A63A7

3A103A113A123A133A143A16

.500

.625

.750

.8751.0001.1251.2501.3751.5001.750

4A44A54A64A7

4A104A114A124A134A144A16

MS20074Length Grip

MS20074

Drilled Head BoltCoarse Thread

.062

.125

.250

.375

.500

.625

.750

.8751.000

-05-04-05-05-05-06-05-07-05-10-05-11-05-12-05-13

.609

.672

.797

.9221.0471.1721.2971.4221.547

Dimensions 5/16-18 Thread

-05-14

MS20074

Drilled Head BoltCoarse Thread

----04-03-04-04-04-05-04-06-04-07-04-10-04-11-04-12-04-13-04-21

Length MS20074.062.062.062.125.250.375.500.625.750.875

1.625

.344

.469

.594

.656

.781

.9061.0311.1561.2811.4062.156

MS20074-03-02-03-03-03-04-03-05-03-06-03-07-03-10-03-11-03-12-03-13-03-21

Dimensions 10-24 Thread 1/4-20 ThreadGrip

MS20073

Drilled Head BoltFine Thread

GripLength.062.062.125.250.375.500.625.750

.469

.594

.656

.781

.9061.0311.1561.281

Dimensions 10-32 Thread 1/4-28 Thread

-04-03-04-04-04-05-04-06-04-07-04-10-04-11-04-12

-03-03-03-04-03-05-03-06-03-07-03-10-03-11-03-12

MS20073MS20073

MS20033MS20034HexagonMachine Bolt1200 0 F

MS20034.2500-28Grip

1/81/43/81/2

41/6449/6457/641-1/64

Thread, Basic Part # & Length

35/6443/6451/6459/64

MS20033Dash

#-1-2-3-4

.1900-32




---------

.125

.188

.250

.312

NAS560HK

100 o Flush HeadMachine ScrewNon-Magnetic, High Temp

Dash #

-00-0-1-2-3-4-5

Grip

.348

.410

.472

.535

.598

.660

.722

.400

.463

.526

.588

.651

.713

.775

.1640-32NAS560HK2

.1900-32NAS560HK3


NAS1202NAS1203NAS1204100o Close Tolerance Bolt

GripDash #

-1-2-3-4-5-6-7-8-9

-10-11-12-13-14-15-16-17-21-22

.062

.125

.188

.250

.312

.375

.438

.500

.562

.625

.688

.750

.812

.875

.9381.0001.0621.3121.375

.338

.401

.464

.526

.588

.651

.714

.776

.838

.901

.9641.0261.0881.1511.2141.2761.3381.5881.651

.338

.401

.464

.526

.588

.651

.714

.776

.838

.901

.9641.0261.0881.1511.2141.2761.3381.5881.651

.1900-32NAS1203

.2500-28NAS1204

.378

.441

.504

.566

.628

.691

.754

.816

.878

.9411.0041.0661.1281.1911.2541.3161.3781.6281.691

.1640-32NAS1202


NAS4403NAS4404

100 o Close Tolerance Bolt,Tri-Slot Recess

Dash #

-2-3-4-5-6-7-8-9

-10-11-12-14-15

.448

.511

.573

.635

.698

.761

.823

.885

.9481.0111.0731.1981.261

---.558.620.682.745.808.870.932.995

1.0581.1201.2451.305

.125

.188

.250

.312

.375

.438

.500

.562

.625

.688

.750

.875

.938

Grip.1900-32NAS4403

.2500-28NAS4404

NAS1003 NAS1004Hexagon Head Machine BoltA 286 Corrosion Resistant Steel"A" After Dash # Indicates UNDRILLED

NAS1004NAS1003Dash #.1900-32 .2500-28

-1-2-3-4-5-7-8-9

-10

.543

.606

.669

.731

.793

.919

.9811.0431.106

Grip

.062

.125

.188

.250

.312

.438

.500

.562

.625

.606

.669

.732

.794

.856

.9821.0441.1061.169

SecondDash #

-3-4-8

Grip

.198

.260

.510

.560

.622

.872

NAS1297-3Basic Part # & Length

NAS1297

Shoulder Bolt, Hex Head.1900-32 Thread

NAS1993NAS1994100 o Reduced Head BoltTorq Set ® Recess (T)Add “C” for Corrosion ResistantAdd “P” for Aluminium Coating

.550

.613

.675

.737

.125

.188

.250

.312

-2TC2T

-4TC4TC4PT-5T

NAS1993 NAS1994.1900-32 .2500-28GripDash #

.463

.526

.588

.650


-3TC3T




NAS6703 Close Tolerance Hex Head BoltA286 CRES Corrosion Resistant SteelLong Threads “U” Indicates Unplated160 KSI Ultimate Tensile, 95 Ultimate Shear

U2U3U4U5U6U7U8U9

Grip

.125.188.250.312.375.438.500.562

.470

.533

.595

.657

.720

.783

.845

.907

.1900-32NAS6703 Length

NAS5903Tri-Wing ®Hex Head ScrewAlloy Steel, Full Thread160 KSI Ultimate Tensile

.36

.44

.50

.56

.62

.78

NAS5903.881.121.381.501.621.75

LengthNAS5903141822242628

-6-7-8-9

-10-12

Length NAS6406A102 NAS6408A17DNAS6408A84Hex Head Close Tolerance Bolt

6AL -4V Titanium Alloy, Aluminium Coated

160 - 180 KSI Ultimate Tensile95 KSI Minimum Ultimate Shear“D” Indicates Aluminium

NAS5002, NAS5003 Pan Head Close Tolerance BoltAlloy Steel, Short ThreadTri-Wing ® Recess

Dash #

-2-3-4-5-6

Grip

.125

.188

.250

.312

.375

.448

.511

.573

.635

.686

.448

.511

.573

.635

.686

.1900-32NAS5003

.1640-32NAS5002


NAS6304

NAS6304 Close Tolerance Bolt,A286 Corrosion Resistant Steel.2500-28 Thread"U" Indicates Unplated

U2U3U4U5U6U7U8U9

.125

.188

.250

.312

.375

.438

.500

.562

.495

.588

.620

.682

.745

.808

.870

.932

LengthGrip

NAS4703, NAS4704100 o Close Tolerance BoltTri-Wing® RecessReduced Head, Alloy Steel

.1900-32NAS4703

-1-2-3-4-5-6-7-8

.062

.125

.188

.250

.312

.375

.438

.500

.385

.448

.511

.573

.635

.698

.761

.823

GripNAS4704

--.495.558.620.682.745.808.870

.2500-28Dash # Thread, Basic Part # & Length

NAS6303U Hex Head, Close Tolerance Bolt,A286 Corrosion Resistant Steel.1900-32 Thread"U" Indicates Unplated

NAS6303U1U2U4U5U6U7U8U9

.062

.125

.250

.312

.375

.438

.500

.562

.385

.448

.573

.635

.698

.761

.823

.885

LengthGrip

NAS4503U, NAS4504U 100 o Close Tolerance BoltTri-Wing® RecessA286 CRES Unplated

Dash #

U2U3U4U5U6

.448

.511

.573

.635

.698

---.558.620.682.745

.125

.188

.250

.312

.375

.1900-32NAS4503

.2500-28NAS4504Grip




NAS7403100º Close Tolerance Bolt10-32 Thread, Phillips Recess,Alloy Steel, 160-180 KSI Ultimate Tensile 95 KSI Min. Ultimate Shear

234568

10111213141516171820222331

.125

.188

.250

.312

.375

.500

.625

.688

.750

.812

.875

.9381.00

1.0621.1251.2501.3751.4381.938

.448

.511

.573

.635

.698

.823

.9481.0111.0731.1351.1981.2611.3231.3851.4481.5731.6981.7612.261

LengthGripNAS7403-

NAS7503100 o Close Tolerance Bolt10-32 Thread, Cruciform Recess,A286 CRES, Short Thread160 KSI Min. Ultimate Tensile,95 KSI Min. Ultimate Shear

NAS7503-34568

12

.188

.250

.312

.375

.500

.750

.511

.573

.635

.698

.8231.073

LengthGrip

NAS8602, NAS8603100º Close Tolerance BoltReduced Head, Phillips RecessAlloy Steel, Short Thread,160 KSI Ultimate Tensile, 95 KSI Ultimate Shear

Dash #

123456789

1012

.062

.125

.188

.250

.312

.375

.438

.500

.562

.625

.750

Grip .1640-32NAS8602-

.1900-32NAS8603-

.385

.448

.511

.573

.635

.698

.761

.823

.885

.9481.073

.385

.448

.511

.573

.635

.698

.761

.823

.885

.9481.073

NAS7703

Pan Head Bolt, Close Tolerance.1900-32 Short Thread,Cruciform Recess, 160-180 KSI Min.Ultimate Tensile, 95 KSI Min. Ultimate Shear

NAS7703-12345678

.062

.125

.188

.250

.312

.375

.438

.500

.385

.448

.511

.573

.635

.698

.761

.823

LengthGrip

Dash #

23456789

1112

.448

.511

.573

.635

.698

.761

.823

.8851.0111.073

.125

.188

.250

.312

.375

.438

.500

.562

.688

.750

Grip .1640-32NAS8702-

.1900-32NAS8703-

NAS8702, NAS8703100º Close Tolerance BoltReduced Head, Phillips RecessA-286 CRES, Short Thread, "U" Indicates Unplated160 KSI Ultimate Tensile, 95 KSI Ultimate Shear

NAS8803A100º Close Tolerance Bolt6 Al - 4V Titanium AlloyPhillips Recess , Short Thread,Aluminium Coated

.448

.511

.573

.635

.698

.761

.823

.8851.0111.073



A2A3A4A5A6A7A8A9

A10A11A12A13A14

.448

.511

.573

.635

.698

.761

.823

.885

.9481.0111.0731.1351.198

LengthGrip.125.188.250.312.375.438.500.562.625.688.750.812.875

NAS8803




NAS514PLengthThread.250.312.375.500.625.750.8751.00.250.312.375.438.500.625.750.8751.00.250.312.375.438.500.625.750.8751.00.375.438.500.625.688.750.8751.00

440-4P440-5P440-6P440-8P

440-10P440-12P440-14P440-16P632-4P632-5P632-6P632-7P632-8P

632-10P632-12P632-14P632-16P832-4P832-5P832-6P832-7P832-8P

832-10P832-12P832-14P832-16P1032-6P1032-7P1032-8P

1032-10P1032-11P1032-12P1032-14P1032-16P

.1120-40(4-40)

.1380-32(6-32)

.1640-32(8-32)

.1900-32(10-32)

NAS514PMachine Screw, 100o

Flat Head, Fully Threaded,Alloy Steel

Thread Length NAS601-

.250

.312

.375

.500

.625

.750

.250

.375

.438

.500

.625

.750

.8751.00

.25

.31

.38

.44

.50

.56

.62

.75.8751.0001.2501.3751.500

4P5P6P8P

10P12P

4P6P7P8P

10P12P14P16P

4P5P6P7P8P9P

10P12P14P16P20P22P24P

NAS600, NAS601NAS602, NAS603NAS604

Pan Head, Cruciform RecessMachine ScrewFully Threaded, Alloy Steel


.25

.31

.38

.44

.50

.56

.62

.69

.75

.81

.88

.941.01.1

1.251.50

4P5P6P7P8P9P

10P11P12P13P14P15P16P18P20P24P

Length



.2500-28(1/4-28)

6P8P

10P12P14P16P

3/81/25/83/47/81

NAS603-ThreadNAS387100o Oval HeadMachine ScrewRecessed Head,Fully Threaded

NAS387LengthThread1/25/83/47/81

1/25/83/47/81

1/25/83/47/81

1-1/81-1/2

632-8P632-10P632-12P632-14P632-16P832-8P

832-10P832-12P832-14P832-16P1032-8P

1032-10P1032-12P1032-14P1032-16P1032-18P1032-24P

.1120-40(4-40)

.1380-32(6-32)

.1900-32(10-32)

.1900-32(10-32)

.1640-32(8-32)

.1380-32(6-32)

.1640-32(8-32)




CORROSION RESISTANTThread Size LengthMS24693-

CARBON STEEL

C1C2C3C4C5C6C7C8C9

C10C23C24C25C26C27C28C29C30C31C32C33C34 ---C46C47C48C49C50C51C52C53C54C55C56C58

C268C269C270C271C272 ---C273C274C275C276C277C278C280C281C282C284C286

3/161/4

5/163/8

7/161/25/83/47/81

3/161/4

5/163/8

7/161/25/83/47/81

1-1/81-1/41-1/21/4

5/163/8

7/161/25/83/47/81

1-1/81-1/41-1/21/4

5/163/8

7/161/2

9/165/83/47/81

1 - 1/81 - 1/41 - 1/21 - 5/81 - 3/4

22 - 1/2

MS24693 (AN507)

100 0 Flat HeadMachine Screw, Non-Structural Example P/N MS24693-C52 (8-32 Thread Corrosion Resistant with 3/4” Length)

MS24693-S1S2S3S4S5S6S7S8S9

S10S23S24S25S26S27S28S29S30S31S32S33S34S36S46S47S48S49S50S51S52S53S54S55S56S58

S268S269S270S271S272 ---S273S274S275S276S277S278S280S281S282S284S286

AN507-440R3440R4440R5440R6440R7440R8

440R10440R12440R14440R16632R3632R4632R5632R6632R7632R8

632R10632R12632R14632R16632R18632R20632R24832R4832R5832R6832R7832R8

832R10832R12832R14832R16832R18832R20832R241032R41032R51032R61032R71032R81032R9

1032R101032R121032R141032R161032R181032R201032R241032R261032R281032R321032R40

Course Thread 1/4-20 Screws available MS24693-S91 thru MS24693-S110 (Alt: AN507-448R14 thru AN507-518R20)Fine Thread 1/4-28 Screws available MS24693-S292 thru MS24693-S310 (Alt: AN507-518R24 thru AN507-616R12)

.1120-40(4-40)

.1380-32(6-32)

.1640-32(8-32)

.1900-32(10-32)




MS24693 (AN507)

100 0 Flat HeadMachine Screw, Non-Structural

100 EA. AN526C632R4 THRU C632R12100 EA. AN526C832R4 THRU C832R16

100 EA. AN526C1032R6 THRU C1032R16

100 EA. MS51957-30 AND MS51957-45100 EA. MS51958-63 AND MS51958-64

100 EA. MS24693-C4 THRU MS24693-C8

100 EA. MS24693-C24 THRU MS24693-C30100 EA. MS24693-C46 THRU MS24693-C52

100 EA. MS24693-C270 THRU MS24693-C276

100 EA. MS24694-C3 THRU MS24694-C7100 EA. MS24694-C48 THRU MS24694-C52

100 EA. AN526C632R6 THRU C632R12100 EA. AN526C832R6 THRU C832R12100 EA. AN526C1032R6 THRU C1032R12100 EA. MS24693-C24 AND MS24693-C30100 EA. MS24693-C46 THRU MS24693-C54100 EA. MS24693-C270 THRU MS24693-C276100 EA. MS24694-C5 THRU MS24694-C9100 EA. MS24694-C48 THRU MS24694-C54

Thread Size Length

3/87/161/25/83/47/81

1 - 1/4

MS24693-S292S293S294S295S296S297S298S300

MS24693-C292C293C294C295C296 -- -- --

CORROSION RESISTANTCARBON STEEL

TRUSS BINDING FILLISTER OVAL ROUND FLAT PAN FLAT

o o

WASHER HEX

FASTENER HEAD STYLES

STAINLESSSCREW KIT #1



NON-STRUCTURALSCREW KIT #1


100 EA. MS24693-S24 THRU MS24693-S30100 EA. MS24693-S48 THRU MS24693-S52100 EA. MS24693-S270 THRU MS24693-S274

100 EA. MS24693-C24 THRU MS24693-C30100 EA. MS24693-C48 THRU MS24693-C52100 EA. MS24693-C270 THRU MS24693-C274


AN526-632R6 THRU -632R12AN526-832R6 THRU -832R12AN526-1032R6 THRU -1032R12AN526C632R6 THRU C632R12AN526C832R6 THRU C832R12AN526C1032R6 THRU C1032R12

100 EA. AN526-632R4 THRU -632R12100 EA. AN526-832R4 THRU -832R12100 EA. AN526-1032R6 THRU -1032R16100 EA. MS24693-S2 THRU MS24693-S8100 EA. MS24693-S24 THRU MS24693-S30

100 EA. MS24693-S46 THRU MS24693-S54

100 EA. MS24693-S270 THRU MS24693-S276

100 EA. MS35206-213 THRU MS35206-219100 EA. MS35206-226 THRU MS35206-232

100 EA. MS35206-241 THRU MS35206-249

100 EA. MS35207-261 THRU MS35207-267

82 100

100 EA.100 EA.100 EA.100 EA.100 EA.100 EA.

.2500-28(1/4-28)




Thread Size Length GripMS24694-

3/323/323/323/323/325/327/329/32

11/3213/3215/3217/3219/3221/3223/3225/3227/3229/3231/32

1 - 1/327/647/647/647/647/647/643/161/4

5/163/8

7/161/2

9/165/8

11/163/4

13/167/8

15/161

1 - 1/161 - 1/8

1 - 3/161 - 1/4

1 - 5/161 - 3/8

1 - 7/161 - 9/16

1 - 11/161 - 13/16

1 - 7/81 - 15/16

9/3211/3213/3215/3217/3219/3221/3223/3225/3227/3229/3231/32

1 - 1/321 - 3/321 - 5/321 - 7/321 - 9/32

1 - 11/321 - 13/321 - 15/32

9/3211/3213/3215/3217/3219/3221/3223/3225/3227/3229/3231/32

1 - 1/321 - 3/321 - 5/321 - 7/321 - 9/32

1 - 11/321 - 13/321 - 15/321 - 17/321 - 19/321 - 21/321 - 23/321 - 25/321 - 27/321 - 29/322 - 1/322 - 5/322 - 9/32

2 - 11/322 - 13/32

C1C2C3C4C5C6C7C8C9

C10C11C12C13C14C15C16C17C18C19C20C46C47C48C49C50C51C52C53C54C55C56C57C58C59C60C61C62C63C64C65C66C67C68C69C70---------------------

MS24694 (AN509)1000 Flat Head ScrewStructural Machine ScrewExample P/N MS24694-S53 (10-32 Thread Carbon Steel Screw with 1/4” Grip and 23/32 “ Length)

CORROSION RESISTANTCARBON STEELMS24694-

S1S2S3S4S5S6S7S8S9

S10S11S12S13S14S15S16S17S18S19S20S46S47S48S49S50S51S52S53S54S55S56S57S58S59S60S61S62S63S64S65S66S67S68S69S70S71S72S74S76S78S79S80

AN5098R48R58R68R78R88R9

8R108R118R128R138R148R158R168R178R188R198R208R218R228R2310R410R510R610R710R810R9

10R1010R1110R1210R1310R1410R1510R1610R1710R1810R1910R2010R2110R2210R2310R2410R2510R2610R2710R2810R2910R3010R3210R3410R3610R3710R38

.1640-32(8-32)

.1900-32(10-32)




Thread Size Length GripMS24694-

9/649/649/643/161/4

5/163/8

7/161/2

9/165/8

11/163/4

13/167/8

15/161

1 - 1/16 1 - 1/81 - 3/161 - 1/41 - 3/8

1 - 7/161 - 1/2

17/3219/3221/3223/3225/3227/3229/3231/321-1/321-3/321-5/321-7/321-9/32

1 - 11/321 - 13/321 - 15/321 - 17/321 - 19/321 - 21/321 - 23/321 - 25/321 - 29/321 - 31/322 - 1/32

C95---

C97C98C99

C100C101C102

------------------------------------------------

MS24694 (AN509)100 0 Flat Head Screw,Structural Machine Screw


MS24694-S95S96S97S98S99

S100S101S102S103S104S105S106S107S108S109S110S111S112S113S114S115S117S118S119

AN509416R8416R9

416R10416R11416R12416R13416R14416R15416R16416R17416R18416R19416R20416R21416R22416R23416R24416R25416R26416R27416R28416R30416R31416R32

100 ea. MS24694-S3 Thru MS24694-S9

100 ea. MS24694-S48 Thru MS24694-S58100 ea. AN525-832R6 Thru AN525-832R16100 ea. AN525-10R6 Thru AN525-10R16

100 ea. MS27039-0804 Thru MS27039-0812100 ea. MS27039-1-06 Thru MS27039-1-16

100 ea. NAS517-3-2 Thru NAS517-3-8

STRUCTURAL SCREWKIT #2

100 ea . MS24694-S3 Thru MS24694-S7100 ea. MS24694-S48 Thru MS24694-S54

100 ea. NAS517-3-2 Thru NAS517-3-8100 ea. AN525-832R6 Thru AN525-832R12

100 ea. AN525-10R6 Thru AN525-10R12

100 ea. MS27039-0808 And MS27039-1-08100 ea. MS27039C0808 And MS27039C1-08


100 ea. MS24694-S3 Thru MS24694-S7100 ea. MS24694-S48 Thru MS24694-S54100 ea. MS24694-C3 Thru MS24694-C7

100 ea. MS24694-C48 Thru MS24694-C54100 ea. NAS517-3-3 Thru NAS517-3-8

100 ea. AN525-832R6 Thru AN525-832R12100 ea. AN525-10R6 Thru AN525-10R12

100 ea. MS27039-0806 Thru MS27039-0812100 ea. MS27039-1-06 Thru MS27039-1-12100 ea. MS27039C0808 And MS27039C1-08


Part # Length GripPE21101-3-1SDPE21101-3-2CPPE21101-3-2SDPE21101-3-3CPPE21101-3-3SDPE21101-3-4CP

Part # Length GripPE21101-3-4SDPE21101-3-6CPPE21101-3-6SDPE21101-3-8SDPE21101-3-10SD

13/3215/3215/3217/3217/3219/32

19/3223/3223/3227/3229/32

1/43/83/81/25/8

1/151/81/8

3/163/161/4

“S” Indicates Steel Alloy“D” Indicates Cadmium Plated Steel Alloy“C” Indicates Corrosion Resistant Steel“P” Indicates Passivated, Corrosion Resistant Steel

(Image of: PE21101-3-10SD)

(Image of: PE21101-3-6 CP)

PE21101130° Flat Head Screw,Torq Set Recess10-32 Thread

®

.2500-28(1/4-28)




.0860-56(2-56)

LengthThread23456789

11121314151617

12018192021232526272829303132333435

125363738414243444546474849505152636465

3/161/4

5/163/8

7/16 1/25/83/41/8

3/161/4

5/163/8

7/161/2

9/165/83/47/81

1-1/23/161/4

5/163/8

7/161/25/83/47/81

1 - 1/41 - 3/81 - 1/21 - 3/4

21/4

5/163/8

7/161/25/83/47/81

1 - 1/41 - 1/21 - 3/4

1/25/83/4

MS51957-

MS51957 MS51958Pan Head Machine Screw,Phillips, Non-Structural,Corrosion Resistant

Thread Length AN526- AN526

Corrosion ResistantCarbon Steel

C440R6C440R8C632R4C632R5C632R6C632R7C632R8

---C632R10C632R12C632R14C632R16

---C832R4C832R5C832R6C832R7C832R8C832R9

C832R10C832R12C832R14C832R16

---C832R20

---C1032R4C1032R5C1032R6C1032R7C1032R8C1032R9

C1032R10C1032R12C1032R14C1032R16C1032R20

---------

3/81/21/45/163/87/161/29/165/83/47/81

1 - 1/41/45/163/87/161/29/165/83/47/81

1 - 1/81 - 1/41 - 1/2

1/45/163/87/161/29/165/83/47/81

1 - 1/41 - 3/81 - 1/2

2

AN526Truss HeadMachine ScrewNon-Structural

440R6440R8632R4632R5632R6632R7632R8632R9

632R10632R12632R14632R16632R20832R4832R5832R6832R7832R8832R9

832R10832R12832R14832R16832R18832R20832R241032R41032R51032R61032R71032R81032R9

1032R101032R121032R141032R161032R201032R221032R241032R32

NAS1100 Pan Head Machine ScrewFull Thread, Offset Cruciform Recess

Length

3-43-63-73-83-93-103-123-143-16

NAS1100-.1360-32

.250

.375

.438

.500

.563

.625

.750

.8751.00

NAS1100-.1640-32

NAS1100-.1900-32

06-406-606-706-8---------------

------

08-708-8---

08-1008-12

------

.1900-24(10-24)

Thread MS51958-6061626364656667686970

5/163/8

7/161/25/83/47/81

1 - 1/41 - 1/21 - 3/4

Length

.1120-40(4-40)

.1380-32(6-32)

.1640-32(8-32)

.1900-32(10-32)

.1380-32(6-32)

.1640-32(8-32)

.1900-32(10-32)

.1120-40(4-40)




Thread Length MS35206- AN515-1/4

5/163/8

7/161/25/83/4

3/161/4

5/163/8

7/161/25/83/47/81

1 - 1/41 - 1/2

1/83/161/4

5/163/8

7/161/25/83/47/81

1 - 1/81 - 1/41 - 1/21 - 3/4

23/161/4

5/163/8

7/161/25/83/47/81

1 - 1/41 - 1/21 - 3/4

22 - 1/45/163/8

7/161/25/83/41

203204205206207208209212213214215216217218219220221222223224225226227228229230231232233234328235236237238240241242243244245246247248249250251252253254260261262263264265267

MS35206 (AN515)

Pan Head, Machine Screw,Non-Structural, Course Thread60 KSI Min Ultimate Tensile

2R42R52R62R72R8

2R102R124R34R44R54R64R74R8

4R104R124R144R164R204R246R26R36R46R56R66R76R8

6R106R126R146R166R186R206R246R286R328R38R48R58R68R78R8

8R108R128R148R168R208R248R288R328R36

1024R51024R61024R71024R8

1024R101024R121024R16

1/43/81/23/4

5/163/81/25/81/4

5/163/8

7/161/25/83/47/81

1 - 1/41 - 1/21 - 3/4

22 - 1/42 - 1/2

33/8

7/161/25/83/47/81

(AN520)

226228230232242243245246259260261262263264265266267268269270271272273275277278279280281282283

AN520-MS35207-LengthThread6R46R66R8

6R128R58R68R8

8R1010R410R510R610R710R8

10R1010R1210R1410R1610R2010R2410R2810R3210R3610R4010R48416R6416R7416R8

416R10416R12416R14416R16

MS35207

NAS623Pan Head, Machine Screw,Cross Recess, Short Thread,160 KSI, Alloy Steel

Thread.338.401.464.526.588.651.714.776.9011.026.338.401.464.526.588.651.714.776.838.9011.0261.1511.276

2-12-22-32-42-52-62-72-82-102-123-13-23-33-43-53-63-73-83-93-103-123-143-16

Grip NAS623-Length.062.125.188.250.312.375.438.500.625.750.062.125.188.250.312.375.438.500.462.625.750.8751.000

Pan Head, Machine Screw,Non-Structural, Fine Thread60 KSI Min Ultimate Tensile

.1120-40(4-40)

.1380-32(6-32)

.1640-32(8-32)

.1900-32(10-32)

.1640-32(8-32)

.0860-56(2-56) .1640-36

(8-36)

.1900-24(10-24)

.1900-32(10-32)

.2500-28(1/4-28)

.1380-40(6-40)




Grip MS27039-LengthThread0804080508060807080808090810081108120813081408150816081708180819082008221-041-051-061-071-081-091-101-111-121-131-141-151-161-171-181-191-201-211-221-231-241-251-261-271-281-301-321-384-054-064-074-084-094-104-114-124-134-144-154-16

.281

.344

.406

.469

.531

.594

.656

.719

.781

.844

.906

.9691.0311.0941.1561.2191.2811.406.281.344.406.469.531.594.656.719.781.844.906.9691.0311.0941.1561.2191.2811.3441.4061.4691.5311.5941.6561.7191.7811.9062.0312.406.344.406.469.531.594.656.719.781.844.916.9691.031

MS27039Structural Machine Screw,Crossed-Recessed, Alloy Steel,125 KSI Min Ulimate Tensile

------------

.094

.156

.219

.281

.344

.406

.469

.531

.594

.656

.719

.781

.844

.969------------

.062

.125

.188

.250

.312

.375

.438

.500

.563

.625

.688

.750

.813

.875

.9381.0001.0621.1251.1881.2501.3121.4381.5631.938

------------

.062

.125

.188

.250

.312

.375

.438

.500

MS27039CStructural Machine Screw,Cross-Recessed, Corrosion Resistant,130 KSI Min Ultimate Tensile

C0805C0806C0807C0808C0809C0810C0812C0813C0814C0816C1-05C1-06C1-07C1-08C1-09C1-10C1-11C1-12C1-13C1-14C1-16C1-17C1-18C1-20C1-21

Grip MS27039LengthThread---------

.094

.156

.219

.344

.406

.469

.594---------

.062

.125

.188

.250

.312

.375

.438

.563

.625

.688

.813

.875

.344

.406

.469

.531

.594

.656

.781

.844

.9061.031.344.406.469.531.594.656.719.781.844.9061.0311.0941.1561.2811.344

Grip MS27039LengthThreadDD0806DD0807DD0808DD0810DD0812DD0814DD0816DD1-06DD1-07DD1-08DD1-09DD1-10DD1-12DD1-14DD1-16DD1-18DD1-20DD1-24DD1-26DD1-28DD1-30DD1-32

.406

.469

.531

.656

.781

.9061.031.406.469.531.594.656.781.9061.0311.1561.2811.5311.6561.7811.9062.031

MS27039DD Structural Machine Screw,2024 Aluminium Alloy,62 KSI Min Ultimate Tensile

------

.094

.219

.344

.469

.594------

.062

.125

.188

.312

.438

.563

.688

.8131.0621.1881.3121.4381.563

.1640-32(8-32)

.1900-32(10-32)

.2500-28(1/4-28)

.1640-32(8-32)

.1900-32(10-32)

.1640-32(8-32)

.1900-32(10-32)




5/163/87/161/29/165/8

11/163/47/81

1 - 1/81 - 1/41 - 3/81 - 1/21 - 5/8

1/45/163/87/161/29/165/8

11/163/47/81

1 - 1/81 - 1/41 - 3/81 - 1/21 - 5/81 - 3/47/161/29/165/83/47/81

1 - 1/41 - 1/2

AN525Washer Head ScrewStructural, Alloy Steel

1/321/321/161/85/327/329/3211/3215/3219/3223/3227/3231/321-3/321-7/321/321/321/321/161/85/327/329/3211/3215/3219/3223/3227/3231/321-3/321-7/321-11/32

1/161/85/327/3211/3215/3219/3227/321-3/32

832R5832R6832R7832R8832R9832R10832R11832R12832R14832R16832R18832R20832R22832R24832R2610R410R510R610R710R810R910R1010R1110R1210R1410R1610R1810R2010R2210R2410R2610R28416R7416R8416R9416R10416R12416R14416R16416R20416R24

Thread Length Grip AN525-

NAS517Close Tolerance100o Flat Head Screw

NAS517-Length GripThread------

.125

.188

.250

.312

.375

.438

.500

.625

.688

.750

.812

.875

.9381.000

---------

.125

.188

.250

.312

.375

.438

.500

.562

.625

.688

.750

.812

.875

.9381.0001.1251.2501.3751.5001.625

---.125.188.250.312.375.438.500.562.625.688.750.812.875

1.000.250.312.375.438.500.562.625.688.750

1.000

.406

.469

.531

.594

.656

.719

.781

.844

.9061.0311.0931.1561.2191.2811.3431.406.343.406.469.531.594.656.719.781.844.906.969

1.0311.0931.1561.2191.2811.3431.4061.5311.6561.7811.9062.031.531.594.656.719.781.844.906.969

1.0311.0931.1561.2191.2811.3431.468.781.844.906.969

1.0311.0931.1561.2191.2811.531

2-02-12-22-32-42-52-62-72-82-102-112-122-132-142-152-163-003-03-13-23-33-43-53-63-73-83-93-103-113-123-133-143-153-163-183-203-223-243-264-04-24-34-44-54-64-74-84-94-104-114-124-134-144-165-45-55-65-75-85-95-105-115-125-16

.3125-24(5/16-24)

AN525DWasher HeadMachine Screw,Structural, Aluminium

Thread Length Grip AN5251/321/161/25/327/329/3211/32

3/87/161/29/165/8

11/163/4

D10R6D10R7D10R8D10R9

D10R10D10R11D10R12

.1640-32(8-32)

.1900-32(10-32)

.2500-28(1/4-28)

.2500-28(1/4-28)

.1900-32(10-32)

.1640-32(8-32)

.1900-32(10-32)




Thread Length MS35214- AN515B

AN520BMS35215-1032R81032R101032R121032R161032R201032R24

555657596061

Thread Length

440R4440R5440R6440R7440R8440R10440R12440R16632R5632R6632R7632R8632R10632R12632R14632R16632R20632R24632R28632R32832R6832R8832R10832R12832R14832R16832R20832R24832R32

MS35214 (AN515B)MS35215 (AN520B)Pan HeadBlack Brass, Instrument Screw

1213141516171820242526272829303132333435404243444546474850

1/2”5/8”3/4”1”

1-1/4”1-1/2”

1/4”5/16”3/8”5/16”1/2”5/8”3/4”1”

5/16”3/8”7/16”1/2”5/8”3/4”7/8”1”

1-1/4”1-1/2”1-3/4”

2” 3/8”1/2”5/8”3/4”7/8”1”

1-1/4”1-1/2”

2”

(Cour se Thread)(Fine Thread)

MS24693-BB(AN507B)

1/4”3/8”1/2”5/8”3/4”1”

1/4”5/16”3/8”7/16”1/2”5/8”3/4”7/8”1”

1-1/8”1-1/4”1-1/2”

2”3/8”1/2”5/8”3/4”7/8”1”

1-1/4”1-1/2”

2”1/2”5/8”3/4”1”

BB2BB4BB6BB7BB8BB10BB24BB25BB26BB27BB28BB29BB30BB31BB32BB33BB34BB36BB40BB48BB50BB51BB52BB53BB54BB56BB58BB62BB272BB273BB274BB276

440R4440R6440R8440R10440R12440R16632R4632R5632R6632R7632R8632R10632R12632R14632R16632R18632R20632R24632R32832R6832R8832R10832R12832R14832R16832R20832R24832R321032R81032R101032R121032R16

Thread Length MS24693- AN507B

Thread Length MS24693-5/16”3/8”3/8”1/2”1/2”5/8”3/4”

MS24693-#B1000 Flush Head Machine ScrewCorrosion Resistant Steel,Black Oxide Coating

4-40

6-32

8-32

10-32

3B4B

26B28B50B51B274B

LengthThread13B14B15B16B17B20B27B29B30B32B33B34B43B44B45B46B47B

MS51957-

Thread MS51958

MS51957-#BMS51958-#BPan Head Machine Screw, Phillips,Corrosion Resistant, Black Oxide Coating

Length

1/4”5/16”3/8”7/16”1/2”7/8”5/16”7/16”1/2”3/4”7/8”1”

3/8”7/16”1/2”5/8”3/4”

(Course Thread)

(Fine Thread)

62B63B64B65B

7/16”1/2”5/8”3/4”

1000 Flush HeadBlack Brass, Instrument Screw

.1640-32(8-32)

.1900-32(10-32)

.1900-32(10-32)

.1900-32(10-32)

.1640-32(8-32)

.1120-40(4-40)

.1380-32(6-32)

.1120-40(4-40)

.1380-32(6-32)

.1640-32(8-32)

.1120-40(4-40)

.1380-32(6-32)




A4-4A4-5A4-6A4-7A4-8A4-12

–––

A6-3A6-4A6-5A6-6A6-7A6-8A6-10A6-12A6-16A6-24A8-4A8-5A8-6A8-7A8-8A8-10A8-12A8-14A8-16A10-4A10-5A10-6A10-7A10-8A10-10A10-12A10-16

131415161719202122252627282930313234364142434445464748495960616263646567

MS35265, MS35266Fillister Head, Machine Screw,Drilled, SlottedMS35265 - Course Thread, UNCMS35266 - Fine Thread, UNF

1/4”5/16”3/8”7/16”1/2”5/8”3/4”7/8”1”

1-1/4”

A10-4A10-5A10-6A10-7A10-8A10-10A10-12A10-14A10-16

----

59606162636465666768

Thread Size Length1/4”5/16”3/8”7/16”1/2”3/4”7/8”1”

1-1/4”3/16”1/4”5/16”3/8”7/16”1/2”5/8”3/4”1”

1-1/2”1/4”5/16”3/8”7/16”1/2”5/8”3/4”7/8”1”

1/4”5/16”3/8”7/16”1/2”5/8”3/4”1”

Length

AN500MS35265-

AN501MS35266-Thread Size

Length

NAS1101 Flat Fillister HeadFull Thread Machine ScrewOffset Cruciform Recess

06-606-8

Thread NAS1101-

.1360-32.1640-32

.375

.500

.500

.438

.500

.563

.625

.7501.001.25

08-83-73-83-93-103-123-163-20

5/8”3/4”

AN503Fillister Head Screw,Drilled, SlottedCourse Thread, UNC

AN503-8

-6-8

-10-12-18-24

-4-6-8-10-12-14-16

1/4”3/8”1/2”5/8”

1/4”3/8”1/2”5/8’’3/4”7/8”1”

3/8”1/2”5/8”3/4”

1-1/8”1-1/2”

Thread Length AN503-6

Thread Length

Thread Length

-4-6-8-10

AN503-10

Length AN503-416-10-12

Thread

AN502Fillister Head Screw,Drilled, SlottedFine Thread, UNF

1/4”3/8”1/2”5/8”3/4”7/8”1”

1-1/8”

-4-6-8

-10-12-14-16-18

Length AN502-10Thread

.1120-40(4-40)

.1380-32(6-32)

.1640-32(8-32)

.1900-32(10-32)

.1900-32(10-32)

.1380-32(6-32)

.1900-32(10-32)

.1640-32(8-32)

.1900-24(10-24)

.1900-24(10-24)

.2500-20(1/4-20)




NAS1351, NAS1352MS16995, MS16996, MS16997, MS16998Socket Head Screw - Undrilled

ThreadNAS1352- MS16997- NAS1352 MS16995-

02-4P02-6P02-8P02-10P02-12P

234––

C02-4C02-6C02-8C02-10C02-12

234––

1/43/81/25/83/4

04-4P04-6P04-8P04-10P04-12P

910111213

C04-4C04-6C04-8C04-10C04-12

910111213

1/43/81/25/83/4

06-4P06-6P06-8P06-10P06-12P

1819202122

C06-4C06-6C06-8C06-10C06-12

1617181920

1/43/81/25/83/41

08-4P08-6P08-8P08-10P08-12P08-16P

303132333436

C08-4C08-6C08-8C08-10C08-12C08-16

–2526272830

Thread NAS1351- MS16998- NAS1351 MS16996-3/81/25/83/41

3-6P3-8P3-10P3-12P3-16P

2627282931

C3-6C3-8C3-10C3-12C3-16

910111213

3/81/25/83/41

1-1/41-1/2

4-6P4-8P4-10P4-12P4-16P4-20P4-24P

40414243454647

C4-6C4-8C4-10C4-12C4-16C4-20C4-24

–212223242526

1/43/81/25/83/4

STAINLESS STEELALLOY STEELLength

Length

.0860-56(2-56)

NAS1351, NAS1352MS24673, MS24674, MS24677, MS24678Socket Head Screw - Drilled

Thread NAS1352- MS24677- NAS1352 MS24674-3/81/25/83/4

06H6P06H8P06H10P06H12P

789

10

C06H6C06H8

C06H10C06H12

2345

3/81/25/8

08H6P08H8P08H10P

141516

C08H6C08H8

C08H10

789

Thread NAS1351-3/81/25/83/4

3H6P3H8P3H10P3H12P

9101112

C3-6C3-8

C3-10C3-12

1234

3/81/25/83/41

4H6P4H8P

4H10P4H12P4H16P

1920212224

–C4H8C4H10C4H12C4H16

–9

101112

NAS1351

STAINLESS STEELALLOY STEELLength

MS24673-MS24678-Length

.1120-40(4-40)

.1380-32(6-32)

.1640-32(8-32)

.2500-28(1/4-28)

.1900-32(10-32)

.1380-32(6-32)

.1640-32(8-32)

.2500-28(1/4-28)

.1900-32(10-32)




MS35308 Hex Head Cap ScrewCorrosion Resistant SteelPassivated, 1/4-28 Thread

Length.500.562.625.750

Length.8751.001.251.50

Part # Part #MS35308-303MS35308-304MS35308-305MS35308-306

MS35308-307MS35308-308MS35308-310MS35308-312

NAS1802Hex Head ScrewFull Thread, Cruciform RecessA286 CRES Steel

Length 4-40 Dia.NAS1802

-04-6-04-7-04-8

.375

.437

.500

6-32 Dia.NAS1802

10-32 Dia.NAS1802

-06-6-06-7-06-8

-3-6-3-7-3-8

NAS1801Hex Head ScrewFull Thread, Cruciform RecessAlloy Steel

Length 4-40 Dia.NAS1801

-04-4-04-5-04-6-04-7-04-8-04-9

-04-10-04-12

----04-16

---------------------

.250

.312

.375

.437

.500

.563

.625

.750

.8751.001.121.25

1.3751.50

1.6251.75

1.875

8-32 Dia.NAS1801

10-32 Dia.NAS1801

-06-4-06-5-06-6-06-7-06-8-06-9

-06-10-06-12

---------------------------

-08-4-08-5-08-6-08-7-08-8-08-9

-08-10-08-12-08-14-08-16-08-18-08-20-08-22-08-24

---------

-3-4-3-5-3-6-3-7-3-8-3-9

-3-10-3-12-3-14-3-16-3-18-3-20-3-22-3-24-3-26-3-28-3-30

6-32 Dia.NAS1801

Length1/4

5/163/8

7/161/2

9/165/83/47/81

1-1/42

6-32 Dia.NAS1096

1-41-51-61-71-81-9

1-101-121-141-16------

2-42-52-62-72-82-9

2-102-122-142-16------

3-43-53-63-73-83-9

3-103-123-143-163-203-32

8-32 Dia.NAS1096

10-32 Dia.NAS1096

NAS1096Hex Head Recessed ScrewFully Threaded,125 -145 KSI Ultimate Tensile

A6H3A6H4A6H5A6H6D6H2D6H3D6H4D6H5

A4H2A4H3A4H4A4H5D4H2D4H3D4H4D4H5

4-40 Dia.AN565

6-32 Dia.AN565

8-32 Dia.AN565

A8H2A8H3A8H4A8H5A8H6D8H3D8H4D8H6

A1032H4A1032H5A1032H6D1032H4D1032H5D1032H6D1032H8D1032H9

AN565 Set Screws, Hex Socket HeadLength in 1/16 of an inchAdd Point Style Type after Base #“A” after Base # for Flat Point“D” after Base # for Cup Point

Cup PointFlat Point

10-32 Dia.AN565

Grip LengthNAS115323456789

10

.125

.188

.250

.312

.375

.438

.500

.562

.625

.401

.464

.526

.588

.651

.714

.776

.838

.901

Steel CorrosionResistant

TitaniumAlloyNAS1153

100° Close Tolerance Machine ScrewShort Thread, Offset Cruciform160 KSI Min Ultimate TensileAvailable in Steel, Titanium Alloy, & Corrosion Resistant Material Codes:A Dash “ - ” after Base # designates Steel“E” after Base # designates A286 Corrosion Resistant Steel“V” after Base # designates Titanium Alloy (6Al-4V)Finish Codes:Steel: No Code Letter after Dash # for Cad Plate, Type 2, Class 2 per QQ-P-416Corrosion Resistant: No Letter after Dash # designates Passivated per QQ-P-35Letter “P” after Dash # designates Cad Plate, Type 2, Class 2 per QQ-P-416Letter “A” after Dash # designates Aluminium Coating per NAS4006Titanium Alloy: No Code Letter after Dash # designates No PlatingLetter “A” after Dash # designates Aluminium Coating per NAS4006




MS35190-

MS35190 (AN505)MS35191 (AN510)Machine Screw, 82° Flat HeadCarbon Steel, Tensile Min. 60 KSI

Thread Length AN505-.250.312.375.438.500.625.250.375.500.625.750.312.375.438.500.625.750

1.000Thread Length MS35191- AN510-

.250

.375

.500

.625

.750

221222223224225226234236238239240250251252253254255257

268270272273274

440R4440R5440R6440R7440R8

440R10632R4632R6632R8

632R10632R12832R5832R6832R7832R8

832R10832R12832R16

1032R41032R61032R8

1032R101032R12

NAS1623 100° Flat Head Machine Screw10-32 Short Thread Offset Cruciform

NAS1623 Length Grip-2-3-4-5-6

.401

.464

.526

.588

.651

.125

.188

.250

.312

.375

Length

NAS1102100° Flat HeadFull Thread Machine ScrewOffset Cruciform RecessAdd “E” after Base # for CRES Steel

3-4---3-63-73-8

3-103-123-143-163-203-243-28

NAS1102-.1360-32

.250

.312

.375

.438

.500

.625

.750

.8751.001.251.501.75

NAS1102-.1640-32

NAS1102-.1900-32

---06-506-6---

06-806-10

------------------

------

08-608-708-8

08-1008-12

---08-16

---------

Dia..058Length

MS21318Drive Screw

1/83/161/4

5/16

Dia..073

Dia..098

Dia..114

MS21318-1MS21318-2

--------

MS21318-13MS21318-14MS21318-15

----

----MS21318-20MS21318-21MS21318-22

MS21318-7MS21318-8MS21318-9

----

MS21207 (CAD II PLATING)NAS548P (CAD I PLATING)100° Flat Head Tapping Screw

Diam. Length MS21207- NAS548P1/43/81/23/81/25/83/47/83/81/25/83/43/81/25/83/4

No. 4

No. 6

No. 8

No. 10

4-44-64-86-66-86-106-126-148-68-88-108-1210-610-810-1010-12

4-44-64-86-66-86-106-126-148-68-88-108-1210-610-810-1010-12

4R44R64R8

4R104R126R46R66R8

6R106R126R148R68R8

8R108R1210R610R8

10R1010R1210R16

Diam. Length MS51861- AN530-1/43/81/25/83/41/43/81/25/83/47/83/81/25/83/43/81/25/83/41

No. 4

No. 6

No. 8

No. 10

1214151617222425262728343536374445464748

MS51861 (AN530)

Pan Head Tapping Screw,

MS51861 Type A Point

AN530 Type B PointAdd “C ” after Dash # forCorrosion Resistant (MS51861 ONLY)

.1120-40(4-40)

.1380-32(6-32)

.1640-32(8-32)

.1900-32(10-32)




6X1/2FHA S/S1000

8X1/2FHA S/S 100 0

10X1/2FHA S/S 1000

Stainless

FLAT HEAD 100 0

Sheet Metal ScrewsStainlessType “A” Point

OHMSC Oval HeadMachine Screw, Stainless

Length OHMSC440R4440R6440R8

440R10440R12440R16

OHMSC OHMSC OHMSC1/43/81/25/83/4

1

632R4632R6632R8

632R10632R12632R16

832R4832R6832R8

832R10832R12832R16

1032R41032R61032R8

1032R101032R121032R16

Steel Stainless

6X1/2FHB

6X3/4FHB

8X1/2FHB

8X3/4FHB

10X1/2FHB

10X3/4FHB

FLAT HEAD 820

Sheet Metal ScrewsType "B" Point

6X1/2FHB S/S

6X3/4FHB S/S

8X1/2FHB S/S

8X3/4FHB S/S

10X1/2FHB S/S

10X3/4FHB S/S

6X3/8PHB6X1/2PHB6X5/8PHB6X3/4PHB8X1/2PHB8X5/8PHB8X3/4PHB

8X1PHB10X1/2PHB10X5/8PHB10X3/4PHB

10X1PHB

Steel Stainless6X3/8PHB S/S6X1/2PHB S/S6X5/8PHB S/S6X3/4PHB S/S8X1/2PHB S/S8X5/8PHB S/S8X3/4PHB S/S

8X1PHB S/S10X1/2PHB S/S10X5/8PHB S/S10X3/4PHB S/S

10X1PHB S/S

PAN HEADSheet Metal ScrewsType "B" Point

OVAL HEADSheet MetalScrews

Steel Stainless4X3/8OHA4X1/2OHA4X5/8OHA4X3/4OHA6X3/8OHA6X1/2OHA6X5/8OHA6X3/4OHA

6X1OHA8X1/2OHA8X5/8OHA8X3/4OHA

8X1OHA10X1/2OHA10X5/8OHA10X3/4OHA

10X1OHA

4X3/8OHA S/S4X1/2OHA S/S4X5/8OHA S/S4X3/4OHA S/S6X3/8OHA S/S6X1/2OHA S/S6X5/8OHA S/S6X3/4OHA S/S

6X1OHA S/S8X1/2OHA S/S8X5/8OHA S/S8X3/4OHA S/S

8X1OHA S/S10X1/2OHA S/S10X5/8OHA S/S10X3/4OHA S/S

10X1OHA S/S

SHEET METAL SCREWPhillips Recess

4X1/4THA4X3/8THA4X1/2THA4X5/8THA4X3/4THA6X3/8THA6X1/2THA6X5/8THA6X3/4THA6X1THA

8X3/8THA8X1/2THA8X5/8THA8X3/4THA8X1THA

10X1/2THA10X5/8THA10X3/4THA10X1THA

4X1/4FHA4X3/8FHA4X1/2FHA4X5/8FHA4X3/4FHA6X3/8FHA6X1/2FHA6X5/8FHA6X3/4FHA6X1FHA

8X3/8FHA8X1/2FHA8X5/8FHA8X3/4FHA8X1FHA

10X1/2FHA10X5/8FHA10X3/4FHA10X1FHA

4X1/4PHA4X3/8PHA4X1/2PHA4X5/8PHA4X3/4PHA6X3/8PHA6X1/2PHA6X5/8PHA6X3/4PHA6X1PHA

8X3/8PHA8X1/2PHA8X5/8PHA8X3/4PHA8X1PHA

10X1/2PHA10X5/8PHA10X3/4PHA10X1PHA

Pan Head Type “A” PointStainless Steel Stainless

4X1/4THA S/S4X3/8THA S/S4X1/2THA S/S4X5/8THA S/S4X3/4THA S/S6X3/8THA S/S6X1/2THA S/S6X5/8THA S/S6X3/4THA S/S6X1THA S/S

8X3/8THA S/S8X1/2THA S/S8X5/8THA S/S8X3/4THA S/S8X1THA S/S

10X1/2THA S/S10X5/8THA S/S10X3/4THA S/S10X1THA S/S

4X1/4FHA S/S4X3/8FHA S/S4X1/2FHA S/S4X5/8FHA S/S4X3/4FHA S/S6X3/8FHA S/S6X1/2FHA S/S6X5/8FHA S/S6X3/4FHA S/S6X1FHA S/S

8X3/8FHA S/S8X1/2FHA S/S8X5/8FHA S/S8X3/4FHA S/S8X1FHA S/S

10X1/2FHA S/S10X5/8FHA S/S10X3/4FHA S/S10X1FHA S/S

4X1/4PHA S/S4X3/8PHA S/S4X1/2PHA S/S4X5/8PHA S/S4X3/4PHA S/S6X3/8PHA S/S6X1/2PHA S/S6X5/8PHA S/S6X3/4PHA S/S6X1PHA S/S

8X3/8PHA S/S8X1/2PHA S/S8X5/8PHA S/S8X3/4PHA S/S8X1PHA S/S

10X1/2PHA S/S10X5/8PHA S/S10X3/4PHA S/S10X1PHA S/S

Truss HeadSteel

Flat Head 820

Stainless Steel




POP RIVETSNon-Structural,Commercial Grade, Domed

.032 - .125

.126 - .250

.063 - .125

.126 - .187

.188 - .250

.251- .312

.313 - .375

.062 - .125

.126 - .187

.188 - .250

AD32ABSAD34ABS

AD42ABSAD43ABSAD44ABSAD45ABSAD46ABSAD52ABSAD53ABSAD54ABS

5/32

1/8

3/32

AB3-2AAB3-4A

AB4-2AAB4-3AAB4-4AAB4-5AAB4-6AAB5-2AAB5-3AAB5-4A

Aluminium Rivet / Aluminium Mandrel - SMALL FLANGEGrip Range POP MarsonDiameter

AVEX RIVETSNon-Structural,Aluminium Body, Steel Stem

5/32

1/8

1/8

5/32

Diameter.046 - .250

.031 - .187

.125 - .312

Grip Range

.125 - .312

.031 - .187

Part #1604-0412

1691-0410 New Rev.1661-0410 Old Rev.

1692-0410 New Rev.1641-0410 Old Rev.

1692-04141661-0512

1601-0410 New Rev.1693-0410 Old Rev.

1693-04141693-0512

Rivet StyleCountersunk Flange

Large Flange

Small Flange

Lo-Profile Head

Large Flange Head

Countersunk Head

Grip Range POP Marson.032 - .125.126 - .187.188 - .250.313 - .375

ABL4-2ABL4-3ABL4-4ABL4-6ABL5-45/32

1/8

AD42BSLFAD43BSLFAD44BSLFAD46BSLFAD54BSLF

Aluminium Rivet / Steel Mandrel - LARGE FLANGEDiameter

.188 - .250

Grip Range POP Marson.032 - .125.126 - .250.063 - .125.126 - .187.188 - .250.251- .312.313 - .375.062 - .125.126 - .187.188 - .250

AD32BSAD34BSAD42BSAD43BSAD44BSAD45BSAD46BSAD52BSAD53BSAD54BS

5/32

1/8

Aluminium Rivet / Steel Mandrel - SMALL FLANGE

3/32 AB3-2AB3-4AB4-2AB4-3AB4-4AB4-5AB4-6AB5-2AB5-3AB5-4

Diameter

Grip Range POP Marson.032 - .125.126 - .187.188 - .250

AD42ABSLFAD43ABSLFAD44ABSLF

5/32

1/8ABL4-2AABL4-3AABL4-4A

Aluminium Rivet / Aluminium Mandrel - LARGE FLANGE

ABL5-4AAD54ABSLF.188 - .250

Diameter

®

.251 - .375 AD36ABS AB3-6A




NUTSERT9505 Series, Splined BodyCarbon Steel, Cadmium Plate

Part #Thread

4-40

6-32

8-32

10-24

Amin.

9505-04

9505-06

9505-08

9505-10

L+ .05M

max.

.185

.185

.185

.185

.385

.385

.385

.385

Material Thickness

.1875

.2187

.2500

.2812

.1935

.2210

.2570

.2900

.1935

.2280

.2656

.2968

.1935

.2280

.2656

.2968

G Dim..03-.09

G Dim..091-.124

G Dim..125-.186

G Dim..187 - >

* Recommended min. hole size C

.182

.214

.245

.276

100

100

Grip Range Mfg. Part # MS27130

NAS1330, MS27130Blind Rivet Nuts, Countersunk Head, Internal Thread*Keyed (K) and Unkeyed

KEYED

NAS1330A6-106A8-106

NAS1330A06-106NAS1330A08-106

A87A93

MS27130.065 - .106

NAS1330

.065 - .106A6K106A8K106

NAS1330A06K106NAS1330A08K106

A87KA93K

Grip Range Mfg. Part #

Thread

8-326-32

8-326-32

.065 - .106

.065 - .106

UNKEYED

Thread

Grip Range Mfg. Part # MS27130---

A6-75A6-120A8-75

A8-120A10-80S10-80

AEA10-140

A1A7A8

A13A14A25S25---

NAS1329, MS27130Blind Rivet Nuts, Flat Head, Internal Thread* Keyed (K) and, Unkeyed

Mfg. Part #Grip RangeA6K-75

A6K-120A6K-160A8K-75

A8K-120A8K-160A10K-80

A10K-130A10K-180

A7KA8KA9K

A13KA14KA15KA25KA26KA27K

KEYED

.010 - .060

.010 - .075

.075 - .120

.010 - .075

.075 - .120

.010 - .080

.010 - .080

.080 - .140

.010 - .075

.075 - .120

.120 - .160

.010 - .075

.075 - .120

.120 - .160

.010 - .080

.080 - .130

.130 - .180

NAS1329A04-60NAS1329A06-75

NAS1329A06-120NAS1329A08-75

NAS1329A08-120NAS1329A3-80NAS1329S3-80

---

NAS1329

NAS1329A06K75NAS1329A06K120NAS1329A06K160NAS1329A08K75NAS1329A08K120NAS1329A08K160NAS1329A3K80

NAS1329A3K130NAS1329A3K180

NAS1329

10-32

8-32

6-32

10-32

8-32

6-32

4-40

Thread

Thread

MS27130

UNKEYED

*Note: May include Rivnut® brand blind rivet nuts




NAS1750NAS1751

Jo Bolts, Blind FastenerInternally Threaded, External Sleeve

.094 - .156

.157 - .217

.220 - .281

.282 - .344

.345 - .406

.407 - .469

.470 - .531

NAS1750-08L208L308L408L508L608L708L8

NAS1750-3L23L33L43L53L63L73L8

.094 - .156

.157 - .217

.220 - .281

.282 - .344

.345 - .406

.407 - .469

.470 - .531

NAS1751-08L208L308L408L508L608L708L8

NAS1751-3L23L33L43L53L63L73L8

NAS17501000Flush Head

NAS1751Protruding Head

Diameter

.200

Diameter

.200

Diameter

.164

Diameter

.164

Grip Range

Grip Range

.094 - .156

.157 - .217

.220 - .281

.282 - .344

.345 - .406

.407 - .469

.470 - .531

NAS1670-08L208L308L408L508L608L708L8

NAS1670-3L23L33L43L53L63L73L8

Grip Range Diameter

.200.164

Diameter

1000 Flush HeadNAS1670


“L” after First Dash # indicates Self-Locking Feature

NAS1669


“L” after First Dash # indicates Self-Locking Feature“DL” after First Dash # indicates Self-Locking and Drive Nut Features

Grip Range.094 - .156.157 - .217.220 - .281.282 - .344.345 - .406.407 - .469.470 - .531.532 - .594.595 - .656

NAS1669-08L208L308L408L508L608L708L808L908L10

NAS1669-3L23L33L43L53L63L73L83L9

3L10

NAS1669-4L24L34L44L54L64L74L84L9---

Diameter

.200 062.

.200 062.

Protruding Head

NAS1669- NAS1669-3DL23DL33DL43DL53DL6

------------

08DL208DL308DL408DL508DL6

------------

Diameter Diameter

461.

461.




MS90354-0502-0503-0504-0505-0506-0507-0508

MS90354 MS90354S0502S0503S0504S0505S0506S0507S0508

U0502U0503U0504U0505U0506U0507U0508

MS90354 MS90354 MS90354-0602-0603-0604-0605-0606-0607-0608

S0602S0603S0604S0605S0606S0607S0608

U0602U0603U0604U0605U0606U0607U0608

.094

.156

.219

.281

.344

.406

.469

.157

.220

.282

.345

.407

.470

.523

.094

.156

.219

.281

.344

.406

.469

5/32

3/16

.157

.220

.282

.345

.407

.470

.523

Diameter

MS90354

Blind Rivet, Protruding HeadHigh Strength, Alloy Steel 112 KSI

"-" after basic part # denotes installation with a double action tool."S" after basic part # denotes fastener installed with a single action tool."U" after basic part # denotes single action fasteners installed with a single action tool.

Maximum GripMinimum Grip

Minimum Grip

1ST DASH NUMBER (DIAMETER) NOM.SIZE

-05-06

DOUBLE ACTION SINGLE ACTION

S05S06

5/323/16

Maximum Grip

MS90353

Blind Rivet, 1000

Flush HeadHigh Strength, Alloy Steel 112 KSI

*Alternate: CR7310

MS90353-0503-0504-0505-0506-0507-0508

MS90353 MS90353S0503S0504S0505S0506S0507S0508

U0503U0504U0505U0506U0507U0508

MS90353-0603-0604-0605-0606-0607-0608

MS90353 MS90353S0603S0604S0605S0606S0607S0608

U0603U0604U0605U0606U0607U0608

.156

.219

.281

.344

.406

.469

.220

.282

.345

.407

.470

.523

5/32

3/16

.156

.219

.281

.344

.406

.469

.220

.282

.345

.407

.470

.523

"-" after basic part # denotes installation with a double action tool."S" after basic part # denotes fastener installed with a single action tool."U" after basic part # denotes single action fasteners installed with a single action tool.

1ST DASH NUMBER (DIAMETER)NOM.SIZE

-05-06

DOUBLE ACTION SINGLE ACTION

S05S06

5/323/16

Diameter Maximum GripMinimum Grip

Diameter Maximum GripMinimum Grip

Diameter

*Alternate: CR7311

*NOTE: Cherry part number alternates may use a different lock washer and require a different pulling head nose piece. Check relevant datasheets on the AAE eStore before selecting an alternate part number.




NAS1080 CollarSwage-Locking for Pull Type Lockbolts

Shear TensionNAS Part #

“–” indicates 2024 Aluminium“AT” indicates 2219 Aluminium Alloy

NAS Part #Nom.Size

Total Length

NAS1080C06NAS1080E06NAS1080G06NAS1080AG06

.164

.190

.250

Nom.Size

Total LengthMin. Max.Max.Min.

NAS1080-05NAS1080AT05NAS1080R05

.170

.233

.305

.200

.263

.335

“C” indicates 2024 Aluminium“E” indicates Carbon steel

Top ViewType C Type ETop View

“R” indicates Carbon steel

NAS1080C08NAS1080E08NAS1080G08NAS1080AG08

“G” indicates 2024 Aluminium alloy“AG” indicates 2219 Aluminium

NAS1080-06NAS1080R06NAS1080-08NAS1080R08

.190

.250

.185

.220

.230

.236

.250

.205

-02-03-04-05-06-07-08-09-10

Grip DashNumber Max. Grip

NAS1465 (.164 Dia.)NAS1466 (.190 Dia.)NAS1468 (.250 Dia.)Pin, Swage Locking, Steel,Standard & Protruding Tension Head, Pull-Type

Grip RangeMin. Max.

.125

.188

.250

.312

.375

.438

.500

.562

.625

.095

.157

.220

.282

.345

.407

.470

.532

.595

.156

.219

.281

.344

.406

.469

.531

.592

.656

-02-03-04-05-06-07-08-09-10


Grip RangeMin. Max.

.125

.188

.250

.312

.375

.438

.500

.562

.625

.095

.157

.220

.282

.345

.407

.470

.532

.595

.156

.219

.281

.344

.406

.469

.531

.592

.656

NAS1456 (.190 Dia.) NAS1458 (.250 Dia.)

Pin, Swage LockingSteel, Standard100 o Tension Head, Pull Type

-02-03-04-05-06-07-08-09-10


NAS1446 (.190 Dia.) NAS1448 (.250 Dia.)Pin Swage LockingSteel, StandardProtruding Head, Shear Pull Type

Grip RangeMin. Max.

.125

.188

.250

.312

.375

.438

.500

.562

.625

.062

.126

.189

.251

.313

.376

.439

.501

.563

.125

.188

.250

.312

.375

.438

.500

.562

.625

-02-03-04-05-06-07-08-09-10


NAS1436 (.190 Dia.) NAS1438 (.250 Dia.)Pin, Swage LockingSteel, Standard100o Shear Head, Pull Type

Grip RangeMin. Max.

.125.188.250.312.375.438.500.562.625

.062.126.189.251.313.376.439.501.563

.125.188.250.312.375.438.500.562.625




4-014-024-034-044-054-064-074-084-09

--5-025-035-045-055-065-075-085-09

--6-026-036-046-056-066-076-086-09

4-014-024-034-044-054-064-074-084-095-015-025-035-045-055-065-075-085-096-016-026-036-046-056-066-076-086-09

.025 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.501 - .562

.031 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.501 - .562

.037 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.501 - .562

.173

.140

.201

Diameter CR3243-CR3242-Grip Range

.173

.140

.201

Diameter Grip Range.025 - .062.063 - .125.126 - .187.188 - .250.251 - .312.313 - .375.376 - .437.438 - .500.501 - .562.031 - .062.063 - .125.126 - .187.188 - .250.251 - .312.313 - .375.376 - .437.438 - .500.501 - .562.037 - .062.063 - .125.126 - .187.188 - .250.251 - .312.313 - .375.376 - .437.438 - .500.501 - .562

CHERRYMAX RIVETCR3212, CR3213CR3242, CR3243Alloy Steel StemAluminium Rivet

CR3212 Nominal Dia.CR3242 Oversize Dia.

1000 Flush Head

.025 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.501 - .562

.031 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.501 - .562

.563 - .625

.037 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.501 - .562

.563 - .625

.626 - .687

---4-024-034-044-054-064-074-084-09

--5-025-035-045-055-065-075-085-095-10

--6-026-036-046-056-066-076-086-096-106-11

4-014-024-034-044-054-064-074-084-095-015-025-035-045-055-065-075-085-095-106-016-026-036-046-056-066-076-086-096-116-12

5/32

1/8

Grip Range CR3212- CR3213-Diameter

3/16

CR3213 Nominal Dia.CR3243 Oversize Dia.

Universal Head

5/32

1/8

Grip RangeDiameter

3/16

.025 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.501 - .562

.031 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.501 - .562

.563 - .625

.037 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.501 - .562

.563 - .625

.626 - .687

®




Universal Head

Grip Range CR2249-CR2248-4-014-024-034-044-054-065-025-035-045-055-066-026-036-046-056-06

1/8

5/32

4-014-024-034-044-054-065-025-035-045-055-066-026-036-046-056-06

.020 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

Diameter

3/16

CHERRYLOCK BULBED RIVETCR2248CR2249

Alloy Steel StemAluminium Sleeve

CR2248

1000 Countersunk

CR2249

CHERRYLOCK BULBED RIVETCR2245

Aluminium Rivet8740 Steel StemUnisink Head

.045 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

1/8

CR2245-

4-014-02

4-034-04

4-05

Grip RangeDiameter

NAS1919MNAS1921M

Diameter Grip Range NAS1919.063 - .125.126 - .187.188 - .250.251 - .312.080 - .125.126 - .187.188 - .250.251 - .312

M04-02M04-03M04-04M04-05M05-02M05-03M05-04M05-05

.125

.156

M04S02M04S03M04S04M04S05M05S02M05S03M05S04M05S05

.125

.156

Diameter Grip Range NAS1921M04-02M04-03M04-04M04-05M05-02M05-03M05-04M05-05

.125

.156

M04S02M04S03M04S04M04S05M05S02M05S03M05S04M05S05

.125

.156

100° Flush Head, Blind Rivet,Bulbed, Monel,Mechanically-LockedSpindle "S" after first dash numberindicates for use with single action, non-shifting tooling

.063 - .125

.126 - .187

.188 - .250

.251 - .312.080 - .125.126 - .187.188 - .250.251 - .312

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.080 - .125

.126 - .187

.188 - .250

.251 - .312

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.080 - .125

.126 - .187

.188 - .250

.251 - .312

NAS1919

NAS1921

Grip Range CR2239-CR2238-

---

4-02

4-03

4-04

4-05

1/8

4-01

4-02

4-03

4-04

---

Diameter

CHERRYLOCK BULBED RIVETCR2238CR2239

Inconel 600 Stem5056 Aluminium SleeveMonel Lock Ring

.045 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

CR2238

CR2239

100° Flush Head

Universal Head

Grip Range CR2163-CR2162-4-024-034-045-025-035-045-05

1/8

5/32

4-024-034-045-025-035-045-05

Diameter

CHERRYLOCK RIVET(WIREDRAW)CR2162CR2163

7075 Aluminium Stem2017 Aluminium Sleeve

CR2162

1000 Flush Head

CR2163

Universal Head

.063 - .125

.126 - .187

.188 - .250

.063 - .125

.126 - .187

.188 - .250

.251 - .312

® ®

®

®




Grip Range CR9117-

3/32

1/8

3-023-033-044-024-034-04

.063 - .125

.126 - .187

.188 - .250

.063 - .125

.126 - .187

.188 - .250

Diameter

CHERRY RIVET CR9117Serrated StemPull ThroughAluminium RivetSteel Stem

Grip Range CR2662-

3/32

3-023-033-043-053-06

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

Diameter

CHERRY RIVET CR2662WiredrawCountersunk HeadA286 Stem and Sleeve

CR2672 Replaces CR1122 SeriesA286 Stem & Sleeve

.063 - .125

.126 - .187

.188 - .250

.251 - .312

3-023-033-043-05

3/32

Diameter CR2672-Grip

CCR274

Cherry Nutplate RivetUniversal Head

Dia. CCR274 CCR274Grip Range

.046 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

SS3-01SS3-02SS3-03SS3-04SS3-05SS3-06SS3-07SS3-08

CS3-01CS3-02CS3-03CS3-04CS3-05CS3-06CS3-07CS3-08

3/32

Carbon Steel Corrosion Resistant

CHERRY "Q" RIVETS

AAPQ5052 Aluminium Rivet7178 Aluminium Mandrel

Diameter Grip Range Part #

1/8.063 - .125.126 - .187.188 - .250

AAPQ-42AAPQ-43AAPQ-44

CR9163Universal Head

CHERRY RIVETCR9162CR9163

Self-Plugging,Serrated StemAluminium Stem& Rivet

CR91621000 Flush Head

Grip Range CR9163-CR9162-4-014-024-034-044-054-065-025-035-045-055-066-026-036-046-056-06

1/8

5/32

4-014-024-034-044-054-065-025-035-045-055-066-026-036-046-056-06

.025 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

Dia.

3/16

.064 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

SS4-02SS4-03SS4-04SS4-05SS4-06

CS4-02CS4-03CS4-04CS4-05CS4-06

CCR264

Cherry Nutplate Rivet1000 Countersunk Head

Dia. CCR264 CCR264Grip Range

.046 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

SS3-01SS3-02SS3-03SS3-04SS3-05SS3-06SS3-07SS3-08

CS3-01CS3-02CS3-03CS3-04CS3-05CS3-06CS3-07CS3-08

3/32

Carbon Steel Corrosion Resistant

1/8

®

®

®

®

CHERRYLOCK ‘A’ RIVET®

Dia. 3/32” thru 1/4” available

Dia. 3/32” thru 1/4” available




CR9179Self-Plugging Rivet2117 Aluminium Stem2017 Aluminium Sleeve

.063 - .125

.126 - .187

.188 - .250

4-024-034-04

1/8

Diameter CR9179-Grip Range

CHERRYMAX RIVETCR3245

Unisink Head/ Oversize DiameterAlloy Steel Stem,Aluminium Alloy Sleeve

.033 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.173

.140

CR3245-4-014-024-034-044-054-064-075-025-035-045-055-065-075-086-026-036-046-056-066-07

Grip RangeDiameter

.201

CR3524

Corrosion Resistant StemMonel Sleeve1000 Flush Shear Head

CHERRYMAX RIVET

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.065 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.080 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

5/32

1/8

CR3524-4-024-034-044-054-065-025-035-045-055-066-026-036-046-056-06

Grip RangeDiameter

3/16

CR3224Corrosion Resistant StemAluminium Alloy Sleeve100 0 Flush Shear Head

CHERRYMAX RIVET

Diameter Grip Range CR3224-4-024-034-044-054-064-074-085-025-035-045-055-065-075-086-026-036-046-056-066-076-08

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.065 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.080 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

1/8

5/32

3/16

CHERRYMAX RIVETCR3214Alloy Steel StemAluminium Alloy Sleeve100 0 Flush Shear Head

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.501 - .562

.065 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.501 - .562

.080 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.126 - .187

.188 - .250

.251 - .312

.313 - .375

5/32

1/8

CR3214-4-024-034-044-054-064-074-084-095-025-035-045-055-065-075-085-096-026-036-046-056-066-076-088-038-048-058-06

Grip RangeDiameter

3/16

1/4

® ®

®

®




.045 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.031 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

CR3552- CR3553-4-014-024-034-044-054-065-015-025-035-045-055-065-076-026-036-046-056-06

Grip Range

CHERRYMAX RIVETCR3552CR3553

Corrosion Resistant StemMonel RivetOversize Diameter

4-014-024-034-044-054-065-015-025-035-045-055-065-076-026-036-046-056-06

CR3552 - 100 0 Flush Head

CR3553 - Universal Head

.173

.140

Diameter

.201

CHERRYMAX RIVETCR3252CR3253

Corrosion Resistant StemAluminium Alloy RivetOversized Diameter



.025 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.031 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.173

.140

CR3252- CR3253--

4-024-034-044-054-064-074-08

--5-025-035-045-055-065-075-086-026-036-046-056-066-076-08

Grip RangeDiameter

.201

4-014-024-034-044-054-064-074-085-015-025-035-045-055-065-075-086-026-036-046-056-066-076-08

CR3523-CR3522-

CR3522CR3523CorrosionResistant StemMonel Rivet

---4-024-034-044-054-064-074-08---

5-025-035-045-055-065-075-08---

6-026-036-046-056-066-076-08

4-014-024-034-044-054-064-074-085-015-025-035-045-055-065-075-086-016-026-036-046-056-066-076-08

CHERRYMAX RIVET

.025 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.031 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.037 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

1/8

5/32

Diameter Grip Range

3/16

CR3522 - 1000 Flush Head




4-014-024-034-044-054-064-074-085-025-035-045-055-065-075-086-026-036-046-056-066-076-08

1/8

5/32

Diameter Grip Range CR3223-

CHERRYMAX RIVET CR3222CR3223CorrosionResistant StemAluminium Alloy Rivet

CR3222-

3/16

4-014-024-034-044-054-064-074-085-025-035-045-055-065-075-086-026-036-046-056-066-076-08

.025 - .062

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

.063 - .125

.126 - .187

.188 - .250

.251 - .312

.313 - .375

.376 - .437

.438 - .500

® ®

® ®




MS20426 - 1000 Flush Head

MS20426ADSolid Rivet2117-T4, Aluminium Alloy

Diameter Length MS204261/8

5/323/167/321/4

9/325/16

11/323/8

13/327/161/2

9/165/8

11/163/47/81

1 - 1/41 - 1/2

1/85/323/167/321/4

9/325/16

11/323/8

13/327/161/2

9/165/8

11/163/4

13/167/8

15/161

1 - 1/161 - 1/81 - 1/41 - 3/81 - 1/21 - 3/4

1/8

3/32

AD3-2AD3-2.5AD3-3AD3-3.5AD3-4AD3-4.5AD3-5AD3-5.5AD3-6AD3-6.5AD3-7AD3-8AD3-9AD3-10AD3-11AD3-12AD3-14AD3-16AD3-20AD3-24AD4-2AD4-2.5AD4-3AD4-3.5AD4-4AD4-4.5AD4-5AD4-5.5AD4-6AD4-6.5AD4-7AD4-8AD4-9AD4-10AD4-11AD4-12AD4-13AD4-14AD4-15AD4-16AD4-17AD4-18AD4-20AD4-22AD4-24AD4-28

Diameter Length MS20426

5/32

3/16

AD5-2AD5-3AD5-3.5AD5-4AD5-4.5AD5-5AD5-5.5AD5-6AD5-6.5AD5-7AD5-8AD5-9AD5-10AD5-11AD5-12AD5-13AD5-14AD5-16AD5-20AD5-22AD5-24AD6-3AD6-4AD6-5AD6-6AD6-7AD6-8AD6-9AD6-10AD6-11AD6-12AD6-13AD6-14AD6-15AD6-16AD6-18AD6-20AD6-24AD8-4AD8-5AD8-6AD8-7AD8-8AD8-10AD8-11AD8-12AD8-22AD8-32

1/4

1/83/167/321/4

9/325/16

11/323/8

13/327/161/2

9/165/8

11/163/4

13/167/81

1 - 1/41 - 3/81 - 1/23/161/4

5/163/8

7/161/2

9/165/8

11/163/4

13/167/8

15/161

1 - 1/81 - 1/41 - 1/2

1/45/163/8

7/161/25/8

11/163/4

1 - 3/82




MS20470ADSolid Rivet2117-T4, Aluminium Alloy

MS20470 - Universal HeadDiameter Length MS20470

1/85/323/167/321/4

9/325/16

11/323/8

13/327/16

15/321/2

17/329/165/8

11/163/47/81

1 - 1/41/8

5/323/167/321/4

9/325/16

11/323/8

13/327/16

15/321/2

9/165/8

11/163/4

13/167/8

15/161

1 - 1/161 - 1/8

1 - 3/161 - 1/41 - 3/81 - 1/2

1/8

3/32

AD3-2AD3-2.5AD3-3AD3-3.5AD3-4AD3-4.5AD3-5AD3-5.5AD3-6AD3-6.5AD3-7AD3-7.5AD3-8AD3-8.5AD3-9AD3-10AD3-11AD3-12AD3-14AD3-16AD3-20AD4-2AD4-2.5AD4-3AD4-3.5AD4-4AD4-4.5AD4-5AD4-5.5AD4-6AD4-6.5AD4-7AD4-7.5AD4-8AD4-9AD4-10AD4-11AD4-12AD4-13AD4-14AD4-15AD4-16AD4-17AD4-18AD4-19AD4-20AD4-22AD4-24


5/32

3/16

AD5-2AD5-3AD5-3.5AD5-4AD5-4.5AD5-5AD5-5.5AD5-6AD5-6.5AD5-7AD5-7.5AD5-8AD5-9AD5-10AD5-11AD5-12AD5-13AD5-14AD5-16AD5-20AD5-22AD6-3AD6-4AD6-5AD6-6AD6-7AD6-8AD6-9AD6-10AD6-11AD6-12AD6-13AD6-14AD6-15AD6-16AD6-18AD6-20AD6-24AD8-4AD8-5AD8-6AD8-7AD8-8AD8-9AD8-10AD8-12AD8-14AD8-16

1/4

1/83/167/321/4

9/325/16

11/323/8

13/327/16

15/321/2

9/165/8

11/163/47/81

1 - 1/81 - 1/41 - 3/83/161/4

5/163/8

7/161/2

9/165/8

11/163/4

13/167/8

15/161

1 - 1/81 - 1/41 - 1/2

1/45/163/8

7/161/2

9/165/83/47/81




MS20470 UNIVERSAL HEADMS20426 100o FLUSH HEAD

MS20426E, MS20470E

Solid Rivet, 7050-T73 Aluminium Alloy

Diameter Length

5/32

3/16

1/45/163/87/161/25/81/45/163/87/161/29/165/8

E5-4E5-5E5-6E5-7E5-8E5-10E6-4E6-5E6-6E6-7E6-8E6-9E6-10


3/16

5/32

1/45/163/87/161/25/81/45/163/87/161/29/165/8

E5-4E5-5E5-6E5-7E5-8E5-10E6-4E6-5E6-6E6-7E6-8E6-9E6-10

.188

.250

.312

.375

.438

.500

.125

.188

.250

.312

.375

.438

.500

.125

LengthDiameter

NAS1200M

Solid Rivet, 100 0 FlushShear Head, Monel

.156

M4-3M4-4M4-5M4-6M4-7M4-8M5-2M5-3M5-4M5-5M5-6M5-7M5-8

.250

.312

.375

.188

.250

.312

.375

.438

.500

.250

.312

.375

.438

.500

.125

LengthDiameter

NAS1097KE

1000 Flush Shear Head,7050-T73 Aluminium Alloy

.156

.188

KE4-4KE4-5KE4-6KE5-3KE5-4KE5-5KE5-6KE5-7KE5-8KE6-4KE6-5KE6-6KE6-7KE6-8

NAS1097NAS1200

MS20470 UNIVERSAL HEADMS20426 100o FLUSH HEAD

MS20426D, MS20470D

Solid Rivet, 2017-T4 Aluminium Alloy

D4-4D4-5D4-6D4-7D4-8D5-4D5-5D5-6D5-7D5-8D5-9D5-10D6-6D6-7D6-8D6-9D6-10


5/32

3/16

1/8

1/45/163/87/161/21/45/163/87/161/29/165/83/87/161/29/165/8


1/8

3/16

5/32

D4-4D4-5D4-6D4-7D4-8D5-4D5-5D5-6D5-7D5-8D5-9D5-10D6-6D6-7D6-8D6-9D6-10

1/45/163/87/161/21/45/163/87/161/29/165/83/87/161/29/165/8




Dia. Length MS20426100o FLUSH HEAD

MS20470UNIVERSAL HEAD

3/161/4

5/163/8

7/161/25/83/4

3/161/4

5/163/8

7/161/2

9/165/83/41

1 - 1/43/161/4

5/163/8

7/161/2

9/165/83/41

1 - 1/41/4

5/163/8

7/161/2

9/165/83/41

1/45/163/8

7/161/25/8

3/16

5/32

1/8

3/32

MS20426A MS20470A

Solid RivetSoft Rivet, 1100-FAluminium Alloy

A3-3A3-4A3-5A3-6A3-7A3-8A3-10A3-12A4-3A4-4A4-5A4-6A4-7A4-8A4-9A4-10A4-12A4-16A4-20A5-3A5-4A5-5A5-6A5-7A5-8A5-9A5-10A5-12A5-16A5-20A6-4A6-5A6-6A6-7A6-8A6-9A6-10A6-12A6-16A8-4A8-5A8-6A8-7A8-8A8-10

A3-3A3-4A3-5A3-6A3-7A3-8A3-10A3-12A4-3A4-4A4-5A4-6A4-7A4-8A4-9A4-10A4-12A4-16A4-20A5-3A5-4A5-5A5-6A5-7A5-8A5-9A5-10A5-12A5-16A5-20A6-4A6-5A6-6A6-7A6-8A6-9A6-10A6-12A6-16A8-4A8-5A8-6A8-7A8-8A8-10

1/4

B3-3B3-4B3-5B3-6B3-7B3-8B3-9B3-10B3-12B3-16B4-3B4-4B4-5B4-6B4-7B4-8B4-9B4-10B4-12B4-16B5-4B5-5B5-6B5-7B5-8B5-9B5-10B5-12B5-14B6-4B6-5B6-6B6-7B6-8B6-9B6-10B6-11B6-12B6-16B8-6B8-7B8-8B8-10B8-12

3/161/45/163/87/161/29/165/83/41

3/161/45/163/87/161/29/165/83/41

1/45/163/87/161/29/165/83/4 7/81/45/163/87/161/29/165/8

11/163/41

3/87/161/25/83/4

B3-3B3-4B3-5B3-6B3-7B3-8B3-9B3-10B3-12B3-16B4-3B4-4B4-5B4-6B4-7B4-8B4-9B4-10B4-12B4-16B5-4B5-5B5-6B5-7B5-8B5-9B5-10B5-12B5-14B6-4B6-5B6-6B6-7B6-8B6-9B6-10B6-11B6-12B6-16B8-6B8-7B8-8B8-10B8-12

Dia. Length MS20426100o FLUSH HEAD

MS20470UNIVERSAL HEAD

MS20426B MS20470B

Solid Rivet5056-H32Aluminium Alloy

3/16

5/32

1/8

3/32

1/4




MS20615Monel RivetUniversal Head

Length MS20615-Diameter

3/32

1/8

5/32

3/16

1/83/161/45/163/87/161/29/165/83/41/83/161/45/163/87/161/29/165/83/47/81

1/83/161/45/163/87/161/29/165/83/41

1/45/163/87/161/25/83/47/8

3M23M33M43M53M63M73M83M93M103M124M24M34M44M54M64M74M84M94M104M124M144M165M25M35M45M55M65M75M85M95M105M125M166M46M56M66M76M86M106M126M14

MS20613 Solid Rivet, Universal HeadCorrosion Resistant (C)Carbon Steel (P)

Length MS20613-Diameter

3/32

1/8

3/161/45/163/81/23/161/41/45/165/163/87/161/21/29/165/163/81/2

3C33C43C53C63C84C34C44P44C54P54C64P74C84P84C95C55C65C8

5/32

MS20427F Solid Rivet 100o CountersunkCorrosion Resistant (F)

LengthDiameter

3/32

1/8

3/161/4

5/163/8

7/161/2

3/161/4

5/163/8

7/161/23/8

7/161/2

F3-3F3-4F3-5F3-6F3-7F3-8F4-3F4-4F4-5F4-6F4-7F4-8F5-6F5-7F5-8

5/32

MS20427

MS20427MMonel Rivet

Countersunk1000

Length MS20427Diameter

3/32

1/8

5/32

3/16

1/85/323/161/4

5/163/8

7/161/21/8

3/161/4

5/163/8

7/161/2

9/165/83/41

3/161/4

5/163/8

7/161/2

9/165/8

11/163/41

5/163/8

7/161/25/83/41

M3-2M3-2.5M3-3M3-4M3-5M3-6M3-7M3-8M4-2M4-3M4-4M4-5M4-6M4-7M4-8M4-9M4-10M4-12M4-16M5-3M5-4M5-5M5-6M5-7M5-8M5-9M5-10M5-11M5-12M5-16M6-5M6-6M6-7M6-8M6-10M6-12M6-16




Diameter Length NAS1097 Diameter Length NAS1097.250.312.375.438.500.250.312.375.438.500

NAS1097D 100o FLUSH SHEAR HEAD

.156

.125

.188

NAS1097D100o Flush Shear Head,2017-T4 Aluminium Alloy

D4-4D4-5D4-6D4-7D4-8D5-4D5-5D5-6D5-7D5-8

.1875

.250

.312

.375

.438

.500

.562

.625

.7501.00

D6-3D6-4D6-5D6-6D6-7D6-8D6-9D6-10D6-12D6-16

Diameter Length NAS1097 Diameter Length NAS1097.125.188.250.312.375.438.500.562.625.7501.00.125.188.219.250.281.312.344.375.407.438.500.562.625.6875.750.8751.001.25.125.188.219.250.281.312.344.375.407.438.500.562.625.688.7501.001.25

NAS1097AD 100o FLUSH SHEAR HEAD

.250

.125

.094

.156

.188

NAS1097AD

100o Flush Shear Head,2117-T4 Aluminium Alloy

AD3-2AD3-3AD3-4AD3-5AD3-6AD3-7AD3-8AD3-9AD3-10AD3-12AD3-16AD4-2AD4-3AD4-3.5AD4-4AD4-4.5AD4-5AD4-5.5AD4-6AD4-6.5AD4-7AD4-8AD4-9AD4-10AD4-11AD4-12AD4-14AD4-16AD4-20AD5-2AD5-3AD5-3.5AD5-4AD5-4.5AD5-5AD5-5.5AD5-6AD5-6.5AD5-7AD5-8AD5-9AD5-10AD5-11AD5-12AD5-16AD5-20

.125

.188

.250

.281

.312

.344

.375

.407

.438

.500

.562

.625

.688

.750

.8125

.875

.9381.001.2501.5001.750.250.312.375.438.500.562.625.688.750.813.875.9381.001.25 -- -- -- -- -- --

AD6-2AD6-3AD6-4AD6-4.5AD6-5AD6-5.5AD6-6AD6-6.5AD6-7AD6-8AD6-9AD6-10AD6-11AD6-12AD6-13AD6-14AD6-15AD6-16AD6-20AD6-24AD6-28AD8-4AD8-5AD8-6AD8-7AD8-8AD8-9AD8-10AD8-11AD8-12AD8-13AD8-14AD8-15AD8-16AD8-20 -- -- -- -- -- --




AD4-3AD4-4AD4-5AD4-6AD4-7AD4-8AD4-9AD4-10AD4-12AD5-4AD5-5AD5-6AD5-7AD5-8AD5-9AD5-10AD5-12AD6-4AD6-5AD6-6AD6-7AD6-8AD6-9AD6-10AD6-12

AD4-3AD4-4AD4-5AD4-6AD4-7AD4-8AD4-9AD4-10AD4-12AD5-3AD5-4AD5-5AD5-6AD5-7AD5-8AD5-9AD5-10AD5-12AD6-4AD6-5AD6-6AD6-7AD6-8AD6-9AD6-10AD6-12

Diameter Length NAS1241

.219

.172

.140

NAS1241 Solid Rivet, Oversize Diameter100 o Flush Shear Head2117-T4 Aluminium AlloyMS20426 Repair

Diameter Length NAS1242.188.250.312.375.438.500.562.625.750.188.250.312.375.438.500.562.625.750.250.312.375.438.500.562.625.750

.219

.172

.140

NAS1242Solid Rivet, Oversize DiameterUniversal Head2117-T4 Aluminium AlloyMS20470 Repair

S4579428AD (McDonnell Part #) AF138AD (Allfast Part #)

100 o Crown Flush Shear Head2117-T4 Aluminium Alloy

Diameter Length Part # Diameter Length Part #

.250

.312

.375

.500

.125

.094

S4579428AD3-4

S4579428AD3-5

S4579428AD3-6

S4579428AD3-8

.188

.250

.312

.375

.438

.500

.562

.625

AF138AD6-3AF138AD6-4AF138AD6-5AF138AD6-6AF138AD6-7AF138AD6-8AF138AD6-9

AF138AD6-10

.156

AF138AD5-3AF138AD5-4AF138AD5-5AF138AD5-6AF138AD5-7AF138AD5-8AF138AD5-9

AF138AD5-10

.188

.250

.312

.375

.438

.500

.562

.625

.188

.250

.312

.375

.438

.500

.562

.625

S4579428AD4-3

S4579428AD4-4

S4579428AD4-5S4579428AD4-6

S4579428AD4-7

S4579428AD4-8

S4579428AD4-9S4579428AD4-10

.188

.188

.250

.312

.375

.438

.500

.562

.625

.750

.250

.312

.375

.438

.500

.562

.625

.750

.250

.312

.375

.438

.500

.562

.625

.750

AF138AD3-4

AF138AD3-5

AF138AD3-6

AF138AD3-8

AF138AD4-3

AF138AD4-4

AF138AD4-5AF138AD4-6

AF138AD4-7

AF138AD4-8

AF138AD4-9AF138AD4-10

S4579428AD6-3S4579428AD6-4S4579428AD6-5S4579428AD6-6S4579428AD6-7S4579428AD6-8S4579428AD6-9S4579428AD6-10

S4579428AD5-3S4579428AD5-4S4579428AD5-5S4579428AD5-6S4579428AD5-7S4579428AD5-8S4579428AD5-9S4579428AD5-10

Allfast P/N Allfast P/N




RIVETS PER POUND REFERENCE TABLE

THE ABOVE QUANTITIES ARE FOR YOUR CONVENIENCE AND ARE APPROXIMATED

Dia. 163456

MS20426 (Aluminium) LENGTH1513 143 4 5 6 7 8 9 01 11 12

5500307718501200

4900275416701090

342019301190790

402522651390910

297516751040700

26351485925620

23601330830560

21401200755510

19501100690465

18001000640430

1683940595404

1555875555375

1460820520350

1370775490330

29901565935630

26451390840570

23751260760520

21501145690475

19601055645440

1800970600400

1680900550380

1575850500350

1460790490335

1380745465315

1300700440300

Dia. 163456

MS20470 (Aluminium) LENGTH3 4 5 6 7 8 9 01 11 21 31 41 51

404020651210745

343517801050700

446022401300880

Dia. 163456

MS20427 (Monel) LENGTH1531 413 4 5 6 7 8 9 01 11 21

19251075660450

1510845520360

1045590370254

1230690430297

905510325220

800450285195

720405255176

650365230160

595335210145

550310195135

500285180125

475265165117

445245158110

420220148100

860435255165

750390235151

675365215138

610325195128

565300182118

525280170112

490260160105

460245150100

43023014095

40521513390

38020512681

Dia. 163456

MS20615 (Monel) LENGTH3 4 5 6 7 8 9 01 11 21 31 41 51

1170565325203

980490290182

1370660375230

1180665420285

1020575365250

905510320220

815480285200

735410260180

670375240165

620350220153

570320205141

535300190132

500280180125

475255167116

Dia. 163456

MS20427 (Corrosion Resistant)3 4 5 6 7 8 9 01 11 21 31 41 51

1705955585405

1390780485335

21751215745510

Dia. 163456

MS20613 (Corrosion Resistant) LENGTH1531 413 4 5 6 7 8 9 01 11 21

1550745425261

1320640385229

970490292186

1100555325209

855440265171

760400240156

690365223145

640340206133

595315192127

555295180119

520278168112

485259159105

455245150100

43023014295

376521201310870

327518451145765

290016301020680

26001465915610

23551320830560

21601210765515

20001120705475

19101038655440

1710965610415

1600900570390

1510850540365

Dia. 163456

NAS1097 (Aluminium) LENGTH3 4 5 6 7 8 9 01 11 21 31 41 51

5300303018451200

4430249515301010

5900337520451330

LENGTH




Max Grip

HL18PB5-2HL18PB5-3HL18PB5-4HL18PB5-5HL18PB5-6HL18PB5-7HL18PB5-8HL18PB5-9HL18PB5-10HL18PB5-11HL18PB5-12HL18PB5-13HL18PB5-14HL18PB5-15HL18PB5-16

1/83/161/45/163/87/161/29/165/8

11/163/4

13/167/8

15/161

8-32 Thread5/32 Nominal Diameter


1/4-28 Thread1/4 Nominal Diameter



HL19 HI-LOK1000 Flush Shear Head95,000 PSI Shear MIN160,000 - 180,000 PSI,Tensile Strength, Alloy Steel

Max GripHL19PB5-2HL19PB5-3HL19PB5-4HL19PB5-5HL19PB5-6HL19PB5-7HL19PB5-8HL19PB5-9HL19PB5-10HL19PB5-11HL19PB5-12HL19PB5-13HL19PB5-14HL19PB5-15

1/83/161/45/163/87/161/29/165/8

11/163/4

13/167/8

15/16




.1635

.1625

.1895

.1885

.2495

.2485

FirstDash #

-5

-6

-8

Nom.Dia.

.1595

.1570

.1840

.1810

.2440

.2410

.2612

.2564

.3016

.2966

.3948

.3898

ADia.

BRef.

DDia.

TDDia. H Thread Double Shear

Pounds Min.Tension

Pounds Min.

1,290

2,000

3,700

4,010

5,380

9,300

5/32

3/16

1/4

.312

.325

.395

.0410

.0390

.0470

.0450

.0610

.0590

8-32 UNJC-3A

10-32 UNJF-3A

1/4-28 UNJF-3A

HL19PB6-2HL19PB6-3HL19PB6-4HL19PB6-5HL19PB6-6HL19PB6-7HL19PB6-8HL19PB6-9HL19PB6-10HL19PB6-11HL19PB6-12HL19PB6-13HL19PB6-14HL19PB6-15


HL18 HI-LOKProtruding Shear Head95,000 PSI Shear MIN160,000 - 180,000 PSI,Tensile Strength, Alloy Steel

.1635

.1625

.1895

.1885

.2495

.2485

FirstDash #

-5

-6

-8

Nom.Dia.

.262

.242

.315

.295

.412

.387

ADia.

BRef.

DDia.

TDDia.

GRef. H Thread Double Shear

Pounds Min.Tension

Pounds Min.

1,940

2,500

4,300

4,010

5,380

9,300

.020

.025

.030

5/32

3/16

1/4

.312

.325

.395

.047.037.055.045.069.059

8-32 UNJC-3A

10-32 UNJF-3A

1/4-28 UNJF-3A

.1595

.1570.1840.1810.2440.2410

®

®




HL21 HI-LOK100 0 Flush Tension Head160,000 - 180,000 PSI,Tensile StrengthAlloy Steel

Max Grip

HL21PB5-2HL21PB5-3HL21PB5-4HL21PB5-5HL21PB5-6HL21PB5-7HL21PB5-8HL21PB5-9HL21PB5-10HL21PB5-11HL21PB5-12HL21PB5-13HL21PB5-14

1/83/161/45/163/87/161/29/165/8

11/163/4

13/167/8




.1635

.1625

.1895

.1885

.2495

.2485

FirstDash #

-5

-6

-8

Nom.Dia.

.1595

.1570

.1840

.1810

.2440

.2410

.3304

.3256

.3813

.3765

.5066

.5018

ADia.

BRef.

DDia.


Pounds Min.Tension

Pounds Min.

2,180

3,180

5,820

4,010

5,380

9,300

5/32

3/16

1/4

.312

.325

.395

.0700

.0680

.0805

.0785

.1080

.1060

8-32 UNJC-3A

10-32 UNJF-3A

1/4-28 UNJF-3A



HL20 HI-LOKProtruding Tension Head160,000 - 180,000 PSITensile StrengthAlloy Steel

Max Grip


1/83/161/45/163/87/161/29/165/8

11/163/4

13/167/8

15/16




.1635

.1625

.1895

.1885

.2495

.2485

FirstDash #

-5

-6

-8

Nom.Dia.

.1595

.1570

.1840

.1810

.2440

.2410

.322

.306

.377

.357

.440

.415

ADia.

BRef.

DDia.

TDDia.


Pounds Min.Tension

Pounds Min.

2,180

3,180

5,820

4,010

5,380

9,300

.030

.035

.045

5/32

3/16

1/4

.312

.325

.395

.060

.055

.074

.064

.090

.077

8-32 UNJC-3A

10-32 UNJF-3A

1/4-28 UNJF-3A



®

®




Max Grip

HL63PB6-2HL63PB6-3HL63PB6-4HL63PB6-5HL63PB6-6HL63PB6-7HL63PB6-8HL63PB6-9HL63PB6-10HL63PB6-11HL63PB6-12

1/83/161/45/163/87/161/29/165/8

11/163/4


1/4-28 Thread17/64 Nom. Dia.

ThreadDouble ShearPounds Min.

TensionPounds Min.

2,000

3,700

6,130

10,490

10-32 UNJF-3A

1/4-28 UNJF-3A

NOTE: Use HL19PB6

HL63 HI-LOK100 0 Flush Shear Head

HL63PB8-2HL63PB8-3HL63PB8-4HL63PB8-5HL63PB8-6HL63PB8-7HL63PB8-8HL63PB8-9HL63PB8-10HL63PB8-11HL63PB8-12

.2026

.2016

.2651

.2641

FirstDash #

-5

-6

-8

Nom.Dia.

.3016

.2966

.3948

.3898

ADia.

BRef.

TDDia.

13/64

17/64

.325

.395

.035

.045

GRef.

.025

.015

.025

.015

RDia.

.074

.064

.080

.077

HD

Dia.

.1840

.1810.2440.2410

Max Grip


1/83/161/45/163/87/161/29/165/8

11/163/4

13/167/8

15/161



FirstDash #

-5

-6

-8

Nom.Dia.

.315

.295

.412

.387

ADia.

BRef.

DDia.

TDDia.


Pounds Min.Tension

Pounds Min.

.025

.030

13/64

17/64

.325

.395

.055

.045

.069

.059

10-32 UNJF-3A

1/4-28 UNJF-3A

NOTE: Use HL18PB6.025.015.025.015

RDia.


6,130

10,490

2,500

4,300

.2026

.2016

.2651

.2641

.1840

.1810

.2440

.2410

HL62 HI-LOKProtruding Shear Head1/64 Oversize for HL1895,000 PSI Shear MIN.Alloy Steel, 160,000 - 180,000PSI Tensile Strength

®

1/64 Oversize for HL1995,000 PSI Shear MIN.Alloy Steel, 160,000 - 180,000PSI Tensile Strength

®




HL65 HI-LOK100 0 Flush Tension Head1/64 Oversize for HL21Alloy Steel160,000 - 180,000PSI Tensile Strength

Max Grip

HL65PB6-2HL65PB6-3HL65PB6-4HL65PB6-5HL65PB6-6HL65PB6-7HL65PB6-8HL65PB6-9HL65PB6-10HL65PB6-11HL65PB6-12HL65PB6-13

1/83/161/45/163/87/161/29/165/8

11/163/4

13/16



.0750

.0730

.1013

.0993

HL65PB8-2HL65PB8-3HL65PB8-4HL65PB8-5HL65PB8-6HL65PB8-7HL65PB8-8HL65PB8-9HL65PB8-10HL65PB8-11HL65PB8-12HL65PB8-13

.2026

.2016

.2651

.2641

FirstDash #

-5

-6

-8

Nom.Dia.

.1840

.1810

.2440

.2410

.3813

.3765

.5066

.5018

ADia.

BRef.

DDia.

TDDia. Thread Double Shear

Pounds Min.Tension

Pounds Min.

10-32 UNJF-3A

1/4-28 UNJF-3A

NOTE: Use HL21PB6

H

3,180

5,820

6,130

10,490

.325

.395

13/64

17/64

NOTE: Use HL20PB6

HL64 HI-LOKProtruding Tension Head1/64 Oversize for HL20Alloy Steel160,000 - 180,000PSI Tensile Strength

.2026

.2016

.2651

.2641

FirstDash #

-5

-6

-8

Nom.Dia.

.1840

.1810

.2440

.2410

.377

.357

.440

.415

ADia.

BRef.

DDia.

TDDia.

GRef. H Thread Tension

Pounds Min.

3,180

5,820

6,130

10,490

.035

.045

13/64

17/64

.325

.395

10-32 UNJF-3A

1/4-28 UNJF-3A

.074

.064.090.077

Max Grip


1/83/161/45/163/87/161/29/165/8

11/163/4

13/167/8



Double ShearPounds Min.


®

®




HL219 HI-LOK

100 0 Flush Shear Head1/32 Oversize for HL1995,000 PSI Shear160,000 - 180,000 PSITensile Strength

Max Grip

HL219-6-3HL219-6-4HL219-6-5HL219-6-6HL219-6-7HL219-6-8HL219-6-9HL219-6-10HL219-6-11HL219-6-12

3/161/45/163/87/161/29/165/8

11/163/4



13/64

7/32

9/32

.0470

.0449

.0610

.0589


.2182

.2172

.2807

.2797

FirstDash #

-5

-6

-8

Nom.Dia.

.1840

.1810

.2440

.2410

.3303

.3253

.4260

.4210

ADia.

BRef.

DDia.

TDDia. Thread Double Shear

Pounds Min.Tension

Pounds Min.

7,100

11,800

.325

.395

10-32 UNJF-3A

1/4-28 UNJF-3A

NOTE: Use HL63PB6

H

2,000

3,700

HL218 HI-LOK Protruding Shear Head1/32 Oversize for HL1895,000 PSI Shear160,000 - 180,000 PSITensile Strength

Max Grip


3/161/45/163/87/161/29/165/8

11/163/4

10/32 Thread7/32 Nominal Diameter

.1840

.1810

.2440

.2410

.315

.295

.412

.387

10-32 UNJF-3A

1/4-28 UNJF-3A

.025

.015

.025

.015


.2182

.2172

.2807

.2797

FirstDash #

-5

-6

-8

Nom.Dia.

ADia.

BRef.

DDia.

TDDia.


Pounds Min.Tension

Pounds Min.

7,10011,800

.025

.030

13/64

7/32

9/32

.325

.395

NOTE: Use HL62PB6

RRad.

2,5004,300


.055

.045

.069

.059

®

®




HL221 HI-LOK100 0 Flush Tension Head1/32 Oversize for HL2195,000 PSI Shear160,000 - 180,000 PSITensile Strength

Max Grip


3/161/45/163/87/161/29/165/8

11/163/4



.0684

.0664

.0948

.0928


.2182

.2172

.2807

.2797

FirstDash #

-5-6

-8

Nom.Dia.

.1840

.1810

.2440

.2410

.3813

.3765

.5066

.5018

ADia.

BRef.

DDia.

TDDia.

Thread Double ShearPounds Min.

TensionPounds Min.

13/64

7/32

9/32.325.395

10-32 UNJF-3A

1/4-28 UNJF-3A

NOTE: Use HL65PB6

H

3,1805,820

7,10011,800

HL220 HI-LOKProtruding Tension Head1/32 Oversize for HL2095,000 PSI Shear160,000 - 180,000 PSITensile Strength

Max Grip


3/161/45/163/87/161/29/165/8

11/163/4




.2182

.2172

.2807

.2797

FirstDash #

-5

-6

-8

Nom.Dia.

.1840

.1810

.2440

.2410

.390

.370

.460

.435

ADia.

BRef.

DDia.

TDDia.


Pounds Min.Tension

Pounds Min.

3,180

5,820

7,100

11,800

.035

.045

13/64

7/32

9/32

.325

.395

10-32 UNJF-3A

1/4-28 UNJF-3A

NOTE: Use HL64PB6.074.064.090.077

®

®




.1650

.1640

.1895

.1885

FirstDash #

-5

-6

Nom.Dia.

.1595

.1570

.1840

.1810

.2922

.2874

.3536

.3486

ADia.

BRef.

DDia.

TDDia. F H Thread Double Shear

Pounds Min.Tension

Pounds Min.

-2

-3

2,100

3,100

.004

.005

.312

.325

8-32 UNJC-3A

10-32 UNJF-3A

.0534

.0514

.0688

.0667

HL325 HI-LOK1000 Flush Shear HeadMS20426 Head StyleInterference Application180,000 - 200,000 PSITensile Strength

Min. GripLength

4,560

6,100

HL326 HI-LOK

Protruding Tension HeadInterference Application160,000 - 180,000 PSITensile Strength

.1650

.1640

.1895

.1885

FirstDash #

-5

-6

Nom.Dia.

.1595

.1570

.1840

.1810

.322

.306

.377

.357

ADia.

BRef.

DDia.

TDDia.


Pounds Min.Tension

Pounds Min.

-2

-2

2,180

2,750

.030

.035

5/32

3/16

.312

.325

8-32 UNJC-3A

10-32 UNJF-3A

.065

.055

.074

.064

Min. GripLength

4,010

5,380

5/32

3/16

Max Grip

HL325-5-2HL325-5-3HL325-5-4HL325-5-5HL325-5-6HL325-5-7HL325-5-8HL325-5-9HL325-5-10

1/83/161/4

5/163/8

7/161/2

9/165/8




Max Grip


1/83/161/4

5/163/8

7/161/2

9/165/8




®

®




Max Grip

HL328-5-2HL328-5-3HL328-5-4HL328-5-5HL328-5-6HL328-5-7HL328-5-8HL328-5-9

HL328-5-10

1/83/161/45/163/87/161/29/165/8



HL328 HI-LOK

Protruding Shear HeadInterference Application108,000 PSI Shear Min180,000 - 200,000 PSITensile Strength

.1650

.1640

.1895

.1885

FirstDash #

-5

-6

Nom.Dia.

.1595

.1570.1840.1810

.262

.242.315.295

ADia.

BRef.

DDia.

TDDia.


Pounds Min.Tension

Pounds Min.

-2

-2

.020

.025

5/32

3/16

8-32 UNJC-3A

10-32 UNJF-3A

.047.037.055.045

Min. GripLength

4,580

6,100

.312

.325

2,200

2,900


HL327 HI-LOK

100 0 Flush Tension HeadMS24694 Head StyleInterference Application160,000 - 180,000 PSITensile Strength

.1650

.1640

.1895

.1885

FirstDash #

-5

-6

Nom.Dia.

.1595

.1570

.1840

.1810

.3304

.3256

.3813

.3765

ADia.

BRef.

DDia.

TDDia. H Thread Tension

Pounds Min.

-2

-3

2,180

2,750

5/32

3/16

.312

.325

8-32 UNJC-3A

10-32 UNJF-3A

.0694

.0674

.0805

.0785

Min. GripLength

4,010

5,380


Max Grip

HL327-5-3HL327-5-4HL327-5-5HL327-5-6HL327-5-7HL327-5-8HL327-5-9

HL327-5-10

3/161/45/163/87/161/29/165/8




®

®




HL23 HI-LOK

100 0 Flush Shear HeadAluminium Alloy45,000 PSI Shear Strength

Max Grip


1/83/161/4

5/163/8

7/161/2

9/165/8



.1635

.1625.1895.1885

FirstDash #

-5

-6

Nom.Dia.

.1595

.1570

.1840

.1810

.2922

.2874

.3536

.3486

ADia.

BRef.

DDia.


Pounds Min.Tension

Pounds Min.

860

1150

1700

2540

5/32

3/16

.312

.325

.0540

.0520

.0688

.0667

8-32 UNJC-3A

10-32 UNJF-3A


HL22 HI-LOK

Protruding Shear HeadAluminium Alloy45,000 PSI Shear Strength

Max Grip


HL22-5-10

1/83/161/45/163/87/161/29/165/8



.1635

.1625.1895.1885

FirstDash #

-5

-6

.1595

.1570.1840.1810

ADia.

BRef.

DDia.

TDDia.


Pounds Min.Tension

Pounds Min.

940

1240

1760

2540

.030

.035

5/32

3/16

.312

.325

.060

.045

.074

.055

8-32 UNJC-3A

10-32 UNJF-3A


Nom.Dia.

.262

.242.315.295

®

®




HL40 HI-LOK

Protruding Shear HeadA-286 High Temp Alloy1/16 th Grip Variation

FirstDash #

-5

Nom.Dia.

.315

.295

ADia.

BRef.

D Diameter TDDia.

GRef. H Thread

Double ShearPounds min.

TensionPounds min.

5,380.0253/16 10-32

without coating with coating

.1895

.1890.1895.1885

.1840

.1810.055.045 2,500-6

.262

.242 4,010.0205/32 8-32.1635.1630

.1635

.1625.1595.1570

.047

.037 1,940

Max Grip

HL40-4-2HL40-4-3HL40-4-4HL40-4-5HL40-4-6HL40-4-7HL40-4-8

1/83/161/4

5/163/8

7/161/2



HL40-5-2HL40-5-3HL40-5-4HL40-5-5HL40-5-6HL40-5-7HL40-5-8

HL40-6-2HL40-6-3HL40-6-4HL40-6-5HL40-6-6HL40-6-7HL40-6-8


-4.240.225 2,840.0201/8 6-32.1375

.1370.1375.1365

.1335

.1310.042.032 1,350.294

.312

.325

HL30 HI-LOK

Protruding Shear Head431 Stainless Steel

Max Grip

HL30-5-2HL30-5-3HL30-5-4HL30-5-5HL30-5-6

1/83/161/45/163/8



HL30-6-2HL30-6-3HL30-6-4HL30-6-5HL30-6-6

FirstDash #

-5

Nom.Dia.

.315

.295

ADia.

BRef.

D Diameter TDDia.


Pounds min.Tension

Pounds min.

7,060.0253/16 10-32


.1895

.1890.1895.1885

.1840

.1810.055.045 3,000-6

.262

.242 .0205/32 8-32.1635.1630

.1635

.1625.1595.1570

.047

.037 2,000.325 5,280

.325

®

®




Max Grip

HL48-5-2HL48-5-3HL48-5-4HL48-5-5HL48-5-6

1/83/161/45/163/8



HL48-6-2HL48-6-3HL48-6-4HL48-6-5HL48-6-6

HL48 HI-LOK

Protruding Shear HeadA-286 High Temp Alloy1/16 th Grip Variation

FirstDash #

-5

Nom.Dia.

.377

.357

ADia.

BRef.

D Diameter TDDia.


Pounds min.Tension

Pounds min.

5,380.0353/16 .325 10-32


.1895

.1890.1895.1885

.1840

.1810.074.084 3,180-6

.322

.308 4,010.0305/32 .312 8-32.1635.1630

.1635

.1625.1595.1570

.060

.055 2,180

HL41 HI-LOK

100o Flush Shear HeadA-286 High Temp Alloy95,000 PSI Shear Min.

Max Grip

HL41-5-2HL41-5-3HL41-5-4HL41-5-5HL41-5-6HL41-5-7HL41-5-8HL41-5-9HL41-5-10HL41-5-11HL41-5-12HL41-5-13HL41-5-14HL41-5-15



1/83/161/45/163/87/161/29/165/8

11/163/4

13/167/8

15/16


HL41-6-10HL41-6-11HL41-6-12HL41-6-13HL41-6-14HL41-6-15

---HL41-4-3HL41-4-4HL41-4-5HL41-4-6HL41-4-7HL41-4-8HL41-4-9

HL41-4-10HL41-4-11HL41-4-12HL41-4-13HL41-4-14

---


FirstDash #

-5

Nom.Dia.

.3016

.2966

ADia.

BRef.

D Diameter TDDia. H Double Shear

Pounds min.Tension

Pounds min.

5,380


.1895

.1890.1895.1885

.1840

.1810.0470.0449 2,000-6

.2612

.2564 4,0105/32 8-32.1635.1630

.1635

.1625.1595.1570

.0410

.0390 1,750

-4 .2219.2171 2,8406-321/8 .1375

.1370.1375.1365

.1335

.1310.0354.0334 950

Thread

.294

3/16

.312

.325 10-32

®

®




HL51 HI-LOK

100 o Reduced Flush ShearAlloy Steel, 3/32 Grip Variation95,000 PSI Shear Min.160,000 - 180,000 PSITensile Strength

Max GripHL51-5-2HL51-5-3HL51-5-4HL51-5-5HL51-5-6HL51-5-7HL51-5-8HL51-5-9

1/83/161/45/163/87/161/29/16

.1635

.1625.1895.1885

FirstDash #

-5

-6

Nom.Dia.

.1595

.1570.1840.1810

.2612

.2564.3036.2966

ADia.

BRef.

DDia.


Pounds Min.Tension

Pounds Min.

1,290

2,000

5/32

3/16

.342

.355

8-32 UNJC-3A

10-32 UNJF-3A

.0410

.0390.0470.0450

4,010

5,380




HL50 HI-LOK

Protruding Shear HeadAlloy Steel, 3/32 Grip Variation95,000 PSI Shear Min.160,000 - 180,000 PSITensile Strength

Max Grip


1/83/161/4

5/163/8

7/161/2

9/16




.1635

.1625

.1895

.1885

FirstDash #

-5

-6

Nom.Dia.

.1595

.1570

.1840

.1810

.262

.242.315.295

ADia.

BRef.

DDia.

TDDia. H Thread Tension

Pounds Min.

1,940

2,500

5/32

3/16

.342

.355

8-32 UNJC-3A

10-32 UNJF-3A

.047

.037.055.045

4,010

5,380


®

®




HST10AG HI-LOK

Protruding Shear HeadTitanium, 1/16th Grip Variation95,000 PSI Shear Min.“AG” Hi-Kote 1 Aluminium coating perHi Shear Spec. 294 and cetyl alcohollube per Hi Shear spec. 305

Max Grip1/83/161/45/163/87/161/29/16



HST10AG5-2HST10AG5-3HST10AG5-4HST10AG5-5HST10AG5-6HST10AG5-7HST10AG5-8HST10AG5-9


HST11AG HI-LOK

100° Reduced Flush Shear HeadTitanium, 1/16th Grip Variation95,000 PSI Shear Min.“AG” Hi-Kote 1 Aluminium coating perHi Shear Spec. 294 and cetyl alcohollube per Hi Shear spec. 305

Max Grip

1/83/161/45/163/87/161/29/16



FirstDash #

-5

-6

TensionPounds Min.

1,940

2,500

Double ShearPounds Min.Thread

8-32 UNJC-3A

10-32 UNJF-3A

Nom.Dia.

5/32

3/16

.020

.025

.1635

.1630

.1895

.1890

.1595

.1570

.1840

.1810

D Dia. TDDia.

.262

.242

.315

.295

ADia.

BRef.

.280

.290

4,010

5,380

.047

.037

.055

.045

HGRef.w/out lube w/ lube

.1635

.1625

.1895

.1885

FirstDash #

-5

-6

TensionPounds Min.

1,650

2,000


8-32 UNJC-3A

10-32 UNJF-3A

5/32

3/16

.2612

.2564

.3016

.2966

ADia.

4,010

5,380

.0410

.0390

.0470

.0450

H



.1635

.1630

.1895

.1890

.1595

.1570

.1840

.1810

D Dia. TDDia.w/out lube w/ lube

.1635

.1625.1895.1885

BRef.

.280

.290

Nom.Dia.

®

®




HLT912AP5-81/2 HLT912AP6-8

HLT912 HI-LOK

Protruding Tension HeadTitanium, 1/16th Grip Variation95,000 PSI Shear Min.160,000 PSI Tensile Min.“AP” Hi-Kote1 Aluminium coating perHi Shear Spec. 294 and cetyl alcohollube per Hi Shear spec. 305

Max Grip

HLT912AP5-3HLT912AP5-4HLT912AP5-5HLT912AP5-6HLT912AP5-7

3/161/4

5/163/8

7/16

.1635

.1625

.1895

.1885

FirstDash #

-5

-6

Nom.Dia.

.322

.306.377.357

ADia.

BRef.

DDia.


Pounds Min.Tension

Pounds Min.

2,180

3,180

.328

.341

8-32 UNJC-3A

10-32 UNJF-3A

.065

.055

.074

.064

4,010

5,380



HLT912AP6-3HLT912AP6-4HLT912AP6-5

GRef.

.030

.035

.1595

.1570.1840.1810

5/32

3/16

HLT912AP6-6HLT912AP6-7

HLT900 HI-LOK

100° Flush Special Shear HeadTitanium, 1/16th Grip Variation95,000 PSI Shear Min.“AP” Hi-Kote1 Aluminium coating perHi Shear Spec. 294 and cetyl alcohollube per Hi Shear spec. 305

Max Grip

HLT900AP6-3HLT900AP6-4HLT900AP6-5HLT900AP6-6HLT900AP6-7HLT900AP6-8

3/161/45/163/87/161/2

FirstDash #

-6

-8



HLT900AP8-3HLT900AP8-4HLT900AP8-5HLT900AP8-6HLT900AP8-7HLT900AP8-8

TensionPounds Min.

2,400

4,500


10-32 UNJF-3A

1/4-28 UNJF-3A

Nom.Dia.

3/16

1/4

ADia.

5,380

9,300

ZMax.015

.015

.1895

.1885.2495.2485

DDia.

BRef.

.341

.416

.3277

.4283

.2963

.3969

A1Dia. H

.047

.037.055.045

.1840

.1810.2440.2410

TDDia.

®

®




HL111 HI-LOK

1000 Flush Shear HeadTitanium, 95,000 PSIShear Minimum1/64 Oversized for HL11

FirstDash #

-5

Nom.Dia.

.3016

.2966

ADia.

BRef.

D Diameter TDDia. H Thread Double Shear

Pounds min.Tension

Pounds min.

6,13013/64 .325 10-32


.2026

.2021

NOTE: Use HL11VAZ6.2026.2016

.1840

.1810.055.045 2,500-6

The 2nd Dash # indicates GripLength in 1/16th’s of an inch

HL110 HI-LOK

Protruding Shear HeadTitanium, 95,000 PSIShear Minimum1/64 Oversized for HL10

FirstDash #

-5

Nom.Dia.

.315

.295

ADia.

BRef.

D Diameter TDDia.


Pounds min.Tension

Pounds min.

6,130.02513/64 .325 10-32


.2026

.2021

NOTE: Use HL10VAZ6.2026.2016

.1840

.1810.055.045 2,500-6


HL11 HI-LOK

100 0 Flush Shear HeadTitanium95,000 PSI Shear Minimum

FirstDash #

-5

Nom.Dia.

ADia.

BRef.

D Diameter TDDia. H Thread Double Shear

Pounds min.Tension

Pounds min.without coating with coating

-6 .3016.2966 5,3803/16 .325 10-32.1895

.1890.1895.1885

.1840

.1810.047.045 2,000

.2612

.2564 4,0105/32 .312 8-32.1635.1630

.1635

.1625.1595.1570

.041

.039 1,650

.3948

.3898 9,3001/4 .395 1/4-28.2495.2490

.2495

.2485.2440.2410

.061

.059 3,700-8


HL10 HI-LOK

Protruding Shear HeadTitanium95,000 PSI Shear Minimum

FirstDash #

-5

Nom.Dia.

.315.295

ADia.

BRef.

D Diameter TDDia.


Pounds min.Tension

Pounds min.

5,380.0253/16 .325 10-32


.1895

.1890.1895.1885

.1840

.1810.055.045 2,500-6

.262

.242 4,010.0205/32 .312 8-32.1635.1630

.1635.1625

.1595

.1570.047.037 1,940

.412

.387 9,300.0301/4 .395 1/4-28.2495.2490

.2495

.2485.2440.2410

.069

.059 4,300-8


®

®

®

®




HL18HL19HL20HL21HL22HL23HL30HL40HL41HL48HL50HL51HL62HL63

HL64HL65HL218HL219HL220HL221HL325HL326HL327HL328HL10VAZHL11VAZHL110VAZHL111VAZ

HL75, HL87HL75, HL87HL84HL84HL93HL93HLT77HL386HL386HLT77HL70, HL79, HL82, HL94HL70, HL79, HL82, HL94HL79, HL82, HL94HL79, HL82, HL94

RECOMMENDED COLLARSHL70, HL79, HL82, HL94HL70, HL79, HL82, HL94HL75, HL86, HL87HL75, HL86, HL87HL77HL77HL70, HL79, HL82, HL94HL70, HL79, HL82, HL94, HL97, HL297HL70, HL79, HL82, HL94HL75, HL78, HL86HL83, HL90HL83, HL90HL79, HL82, HL94HL79, HL82, HL94

Hi-Lok Pin Recommended Collars Hi-Lok Pin Recommended Collars

HL70HL75HL77HL79HL82HL84HL86HL87HL90HL93HL94HLT77

Part # Material Application DescriptionHI-LOK COLLARS

SHEARTENSIONSHEARSHEARSHEARSHEARTENSIONTENSIONSHEARTENSIONSHEARSHEAR

STANDARD COLLAR FOR HL18 AND HL19SELF ALIGNING COLLAR ASSEMBLYFOR USE ON STANDARD SIZE ALUMINIUM ALLOY PINSFOR USE ON STANDARD AND 1/64 OVERSIZE HI-LOK PINSSELF ALIGNING COLLAR ASSEMBLYFOR USE ON 1/32 OVERSIZE HI-LOK PINSFOR USE ON HL20 AND HL21FOR USE ON 1/64 OVERSIZE HI-LOK PINSFOR USE ON HL50 AND HL51FOR USE ON 1/32 OVERSIZE HI-LOK PINSFOR USE ON STANDARD AND 1/64 OVERSIZE HI-LOKSFOR USE ON HL325 AND HL328

2024-T6 ALUMINIUM ALLOY303 STAINLESS STEEL2024-T6 ALUMINIUM ALLOY2024-T6 ALUMINIUM ALLOYALUM. COLLAR, STAINLESS STEEL WASHER2024-T6 ALUMINIUM ALLOY303 STAINLESS STEEL303 STAINLESS STEEL2024-T6 ALUMINIUM303 STAINLESS STEEL

303 STAINLESS STEEL2024-T6 ALUMINIUM

Material noitpircseD niPelytS daeH

HI-LOK & COLLAR QUICK REFERENCE GUIDE

HL10HL11HL18HL19HL20HL21HL22HL23HL30HL40HL41HL48HL50HL51HL62HL63HL64HL65

HL110HL111HL218HL219HL220HL221HL325HL326HL327HL328

HLT900HLT912

StudPROTRUDING SHEAR1000 FLUSH SHEARPROTRUDING SHEAR1000 FLUSH SHEARPROTRUDING TENSION1000 FLUSH TENSION HEADPROTRUDING SHEAR HEAD1000 FLUSH SHEAR HEADPROTRUDING SHEAR HEADPROTRUDING SHEAR HEAD1000 FLUSH SHEAR HEADPROTRUDING TENSION HEADPROTRUDING SHEAR HEAD1000 FLUSH SHEAR HEADPROTRUDING SHEAR HEAD1000 FLUSH SHEAR HEADPROTRUDING TENSION HEAD1000 FLUSH TENSION HEADPROTRUDING SHEAR HEAD1000 FLUSH SHEAR HEADPROTRUDING SHEAR HEAD1000 FLUSH SHEAR HEADPROTRUDING TENSION HEAD1000 FLUSH TENSION HEAD1000 FLUSH SHEAR HEADPROTRUDING TENSION HEAD1000 FLUSH TENSION HEADPROTRUDING SHEAR HEAD1000 FLUSH SHEAR SPECIALHEADPROTRUDING TENSION HEAD

6AL-4VTITANIUM

ALLOY STEEL

7075-T6ALUMINIUM ALLOY

431 STAINLESS STEEL

A-286 HIGH TEMP ALLOY

ALLOY STEEL

6AL-4VTITANIUM

ALLOY STEEL

STANDARD SHANK DIAMETER

1/16 GRIP VARIATION

3/32 GRIP VARIATION1/64 OVERSIZE FOR HL181/64 OVERSIZE FOR HL191/64 OVERSIZE FOR HL201/64 OVERSIZE FOR HL211/64 OVERSIZE FOR HL101/64 OVERSIZE FOR HL111/32 OVERSIZE FOR HL181/32 OVERSIZE FOR HL191/32 OVERSIZE FOR HL201/32 OVERSIZE FOR HL21

LEAD IN RADIUSINTERFERENCE APPLICATION

6AL-4VTITANIUM

STANDARD SHANK DIAMETER1/16 GRIP VARIATION

®

®




HL70 COLLAR

Shear ApplicationAluminium Alloy

HL75 COLLAR

Self-Aligning Collar AssemblyTension Application303 Stainless Steel

HL77 COLLAR


HL70

.292

.288

.307

.303

.412

.408

.518

.512

.173

.166

.200

.192

.261

.252

.325

.314

ADIA.

BDIA. L

15-25

25-35

60-80

130-160

1400

1600

3000

5000

8-32 UNJC-3B

10-32 UNJF-3B

1/4-28 UNJF-3B

5/16-24 UNJF-3B

5/32

3/16

1/4

5/16

-5

-6

-8

-10

HL75PIN.

NOM.DIA.

THREADA

DIA. BUTSLBS.MIN.

TORQUE OFFIN. LBS.

5/32

3/16

1/4

5/16

-5A

-6A

-8A

-10A

HL75-5W - Washer Only, HL75-5AW - Collar/Washer Combination

L



.365

.355

.475

.465

.620

.610

.095

.085

.120

.110

.130

.120

.457

.427

.552

.522

.672

.642

HL77

.292

.288

.307

.303.412.408.518.512

.173

.166.200.192.261.252.325.314

.447

.427

.457

.437.552.532.672.652

PIN.NOM.DIA.

THREAD ADIA.

BDIA. L

UTSLBS.MIN.

TORQUE OFFIN. LBS.

10-20

20-30

55-70

100-125

1400

1600

3000

5000

8-32 UNJC-3B

10-32 UNJF-3B

1/4-28 UNJF-3B

5/16-24 UNJF-3B

5/32

3/16

1/4

5/16

-5

-6

-8

-10

TENSIONPRELOAD LBS.

MIN.

350

500

1000

1650

.365

.355.095.085

.457

.427 2300

2750

5000

8300

30-40

40-50

115-130

200-250

8-32 UNJC-3B

10-32 UNJF-3B

1/4-28 UNJF-3B

5/16-24 UNJF-3B

TORQUE OFFIN. LBS.

.447

.427

.457

.437

.552

.532

.672

.652

PIN.NOM.DIA.

THREADUTS LBS. MIN.




HL79 COLLAR

Shear ApplicationAluminium AlloyFor Use on Standard and1/64 Oversized Hi-Loks

HL82 COLLAR

Shear Application, Self AligningAluminium Collar, Stainless Washer

“AW” suffix for collar washer combination“PB” Inclusion for CAD II Plated Washer

HL79

.322

.318

.422

.418

.538

.532

.212

.208

.272

.268

.336

.330

.457

.437

.552

.532

.672

.652

PIN.NOM.DIA.

THREAD ADIA.

BDIA. L

UTSLBS.MIN.

TORQUE OFFIN. LBS.

25-35

60-80

130-160

1600

3000

5000

10-32 UNJF-3B

1/4-28 UNJF-3B

5/16-24 UNJF-3B

5/32

13/64

17/64

21/64

-5

-6

-8

-10

HL82

.365

.355

.365

.355

.475

.465

.620

.610

.445

.445

.570

.690

PIN.NOM.DIA.

THREAD ADIA.

BDIA. L

UTSLBS.MIN.

TORQUE OFFIN. LBS.

22-32

32-42

75-90

140-170

1400

1600

3000

5000

8-32 UNJC-3B

10-32 UNJF-3B

1/4-28 UNJF-3B

5/16-24 UNJF-3B

5/32

3/16

1/4

5/16

-5##

-6##

-8##

-10##

NOTE: FOR 5 DIAMETER HI-LOKS USE HL70-5

.420

.400

.420

.400

.540

.520

.647

.627

M

.095

.085

.095

.085

.120

.110

.130

.120

HL78

.287

.283

.307

.303

.412

.408

.173

.166

.212

.208

.272

.268

ADIA.

BDIA. L

30-40

40-50

110-130

2,300

2,750

5,000

5/32

3/16

1/4

-5

-6

-8

HL78 COLLAR

Tension ApplicationA-286 High Temp. Alloy1/16th Grip Variation

.447

.427.457.437.552.532

UTSLBS.MIN.

TORQUE OFFIN. LBS.

PIN.NOM.DIA.

THREAD

8-32 UNJC-3B

10-32 UNJF-3B

1/4-28 UNJF-3B

“A” suffix for collar only, “W” for washer only

Example Part #: HL82-6APBW, HL82-8A, HL82-5AW, HL82-5W




HL90 COLLAR


HL90

.292

.288

.307

.303

.173

.166

.200

.192

.447

.427

.457

.437

THREADA

DIA.B

DIA. L TORQUE OFFIN. LBS.

15-25

25-35

1,400

1,600

8-32 UNJC-3B

10-32 UNJF-3B

5/32

3/16

LP5A

LP6A

UTS LBS.MIN.

PIN.NOM. DIA.

HL87 COLLARTension Application303 Stainless SteelFor Use on 1/64 Oversized Hi-LoksNOTE: For HL87-5 Diameter Pin, Use HL86-5

HL87

.307

.303

.412

.408

.518

.512

.212

.208

.272

.268

.336

.330

.457

.437

.552

.532

.672

.652

PIN.NOM. DIA. THREAD A

DIA.B

DIA. L UTS LBS.MIN.

TORQUE OFFIN. LBS.

40-50

115-130

200-250

2,750

5,000

8,300

10-32 UNJF-3B

1/4-28 UNJF-3B

5/16-24 UNJF-3B

13/64

17/64

21/64

-6

-8

-10

HL86 COLLAR

Tension Application303 Stainless Steel

HL86

.287

.283

.307

.303

.412

.408

.518

.512

.173

.166

.200

.192

.261

.252

.325

.314

.447

.427

.457

.437

.552

.532

.672

.652

PINNOM. DIA.

THREAD ADIA.

BDIA.

L UTS LBS.MIN.

TORQUE OFFIN. LBS.

30-40

40-50

115-130

200-250

2,300

2,750

5,000

8,300

8-32 UNJC-3B

10-32 UNJF-3B

1/4-28 UNJF-3B

5/16-24 UNJF-3B

5/32

3/16

1/4

5/16

-5

-6

-8

-10

HL84 COLLAR

Shear ApplicationAluminium AlloyFor Use on 1/32 Oversized Hi-Loks

HL84

.335

.325

.430

.420

.580

.570

.227

.223

.290

.286

.353

.347

.457

.437

.552

.532

.672

.652


DIA.B

DIA. L UTS LBS.MIN.

TORQUE OFFIN. LBS.

25-35

60-80

130-160

1,600

3,000

5,000

10-32 UNJF-3B

1/4-28 UNJF-3B

5/16-24 UNJF-3B

-6

-8

-10

7/32

9/32

11/32

HL86W# (self aligning) HL86-#

HL87W# (self aligning) HL87-#




HLT77 COLLAR


HLT77

.292

.288.307.303.412.408

.179

.175.205.201.265.261

.447

.427.457.437.550.530

THREAD ADIA.

BDIA. L TORQUE OFF

IN. LBS.

15-25

25-35

60-80

1,400

1,600

3,000

8-32 UNJC

10-32 UNJF

1/4-28 UNJF

5/32

3/16

1/4

-5

-6

-8

PIN.NOM. DIA.

UTS LBS.MIN.

HL97

.240

.235

.287

.283

.307

.303

.147

.143

.173

.166

.200

.195

L

10-20

15-25

25-35

1,350

1,940

2,500

6-32 UNJC-3B

8-32 UNJC-3B

10-32 UNJF-3B

1/8

5/32

3/16

-4

-5

-6

HL97 COLLARShear ApplicationA-286 High Temp. Alloy1/16th Grip Variation

.420

.400

.447

.427

.457

.437


DIA.B

DIA.UTS LBS.

MIN.TORQUE OFF

IN. LBS.

HL94 COLLARShear Application303 Stainless SteelFor Use on Standardand 1/64 Oversized Hi-Loks

HL94

.292

.288

.322

.318

.422

.418

.538

.532

.173

.166

.212

.208

.272

.268

.336

.330

.447

.427

.457

.437

.552

.532

.672

.652

THREAD ADIA.

BDIA. L TORQUE OFF

IN. LBS.

2,300

2,750

5,000

8,300

8-32 UNJC-3B

10-32 UNJF-3B

1/4-28 UNJF-3B

5/16-24 UNJF-3B

5/32

13/64

17/64

21/64

-5

-6

-8

-10

15-25

25-35

60-80

130-160

PIN.NOM. DIA.

UTS LBS.MIN.

HL93 COLLARTension Application303 Stainless SteelFor Use on 1/32 Oversize Hi-Loks

HL93

.332

.328

.427

.423

.578

.572

.457

.437.552.532.672.652

THREAD ADIA.

BDIA. L TORQUE OFF

IN. LBS.

40-50

115-130

200-250

2,750

5,000

8,300

10-32 UNJF-3B

1/4-28 UNJF-3B

5/16-24 UNJF-3B

7/32

9/32

11/32

-6

-8

-10

.227.223.290.286.353.347

UTS LBS.MIN.

PIN.NOM. DIA.




CAMLOC RECEPTACLEFOR 2600 / 2700 SERIES

Monadnock receptacles have the same Fit, Form & FunctionRivet Hole

212-12212-12D212-12N212-12A212-12S

212-12SD

PlainCountersunk

Plain

Dimpled

Material

Stainless Steel

Aluminium

Monadnock #112770111277021127726112770711277111127712

Part #Silicon Bronze(Cad Plated)

212-12NNarrow Width

212-12, 212-12D, 212-12A212-12A, 212-12SD

2600-1S2600-2S2600-3S2600-4S2600-5S2600-6S2600-7S2600-8S

2600-1SW2600-2SW2600-3SW2600-4SW2600-5SW2600-6SW2600-7SW2600-8SW

STAINLESS STEELWingedSlotted

Total Panel ThicknessUsing 212-12 Receptacle

.030-.059

.060-.089

.090-.119

.120-.149

.150-.179

.180-.209

.210-.239

.240-.269

---26S51-226S51-326S51-426S51-526S51-626S51-726S51-8

Phillips

CAMLOC 2600 SeriesProtruding Head Stainless Steel

MONADNOCKSlotted 1126007-#Phillips 1126008-#Winged 1126014-#

26S8-226S8-326S8-426S8-526S8-626S8-726S8-826S8-9

26S8-1026S8-1126S8-1226S8-1426S8-1526S8-16

CARBON STEELPhillipsSlotted

.060-.089

.090-.119

.120-.149

.150-.179

.180-.209

.210-.239

.240-.269

.270-.299

.300-.329

.330-.359

.360-.389

.420-.449

.450-.479

.480-.509

2600-22600-32600-42600-52600-62600-72600-82600-9

2600-102600-112600-122600-142600-152600-16


CAMLOC 2600 SeriesProtruding Head Carbon Steel

MONADNOCKSlotted 1126000-#Phillips 1126004-#

*see Stainless Steel (below) for Winged Stud

---.540-.569 2600-18

®

®

®




CAMLOC RETAININGRINGS FOR 2600/2700 SERIES

Monadnock has same Fit, Form & Function

2600-SW2600-SW2

2600-LW2600-LW-7

27S5-1

Part # Type MaterialStainless Steel

Cad. PlatedCad. Plated

Stainless Steel

Split RingSplit RingSolid RingSolid Ring

2600-SW2600-SW22600-LW

2600-LW-7

Monadnock #1127722112772311277001127746

27S5-1 Solid Ring Cad. Plated 1127301

.060-.089

.090-.119

.120-.149

.150-.179

.180-.209

.210-.239

.240-.269

.270-.299

.300-.329

CAMLOC 2700 SeriesFlush Head Stainless SteelMONADNOCKSlotted 1127003-#, Phillips 1127009-#

Part # Slotted

2700-2S2700-3S2700-4S2700-5S2700-6S2700-7S2700-8S2700-9S2700-10S

Part # Phillips

27S3-2S27S3-3S27S3-4S27S3-5S27S3-6S27S3-7S27S3-8S27S3-9S

--


Slotted Part #

Phillips Part #

2700-22700-32700-42700-52700-62700-72700-82700-9

2700-102700-112700-122700-132700-142700-152700-162700-172700-182700-19

.060-.089

.090-.119

.120-.149

.150-.179

.180-.209

.210-.239

.240-.269

.270-.299

.300-.329

.330-.359

.360-.389

.390-.419

.420-.449

.450-.479

.480-.509

.510-.539

.540-.569

.570-.599

CAMLOC 2700 SeriesFlush Head Carbon SteelMONADNOCKSlotted 1127000-#, Phillips 1127004-#

27S3-227S3-327S3-427S3-527S3-627S3-727S3-827S3-9

27S3-1027S3-1127S3-1227S3-1327S3-14

----------


®

®

®




CAMLOC RETAINING RINGSFOR 4002 SERIESHeavy Duty Series

Part # MaterialCad PlatedStainless

Alloy Steel, Cad PlatedSpring Steel, Cad Plated

Stainless Steel

R4G40G26-1

R4T(Hi Shear)4002-SW

4002-SW-SS

R4G40G26-1

R4T

Monadnock #11429021142905114291311427031142721

4002-SW4002-SW-SS

.237

.231

.443

.431

.025

.015

Max PanelThickness Part # Material

.065

.065

.074

.074

.094

.094

.117

.117

.072

4002-N4002-NS4002-G

4002-GS4002-O

4002-OS4002-H

4002-HS4002-N3

Cad PlatedStainless

Cad PlatedStainless

Cad PlatedStainless

Cad PlatedStainless

Cad Plated4002-G

4002-GS4002-H

4002-HS

CAMLOC GROMMETSFOR 4002 SERIESHeavy Duty Series Monadnock has same Fit, Form & Function

Monadnock #

1142901-21142903-21142900-11142904-11142901-31142903-31142900-21142904-21142922-1

4002-N34002-N4002-NS4002-O

4002-OS

. 197. 187 .128 . 170

. 622 . 872

.197 .248

CAMLOC RECEPTACLEFOR 4002 SERIESSilicon Bronze

Part # Rivet Hole214-16

214-16D214-16S

214-16SD244-16

244-16D244-16S

PlainCountersunk

Plain, FloatingCountersunk

Plain, FloatingCountersunk

Plain, Floating

MaterialSilicone

Bronze, Cad Pltg.

Stainless Steel

SteelCad Plated

Stainless Steel214-16 244-16

Monadnock #1142700114270111427101142711114270611427161142717

CAMLOC 4002 SeriesHeavy Duty Carbon Steel & Stainless Steel

STAINLESSSTEEL

PIN.NOM. DIA.

PhillipsSlotted

Panel ThicknessUsing Receptacles

.081-.110

.111-.140

.141-.170

.171-.200

.201-.230

.231-.260

.261-.290

.291-.320

.321-.350

.351-.380

.381-.410

.411-.440

.441-.470

.471-.500

.501-.530

.531-.560

.051-.080

.081-.110

.111-.140

.141-.170

.171-.200

.201-.230

.231-.260

.261-.290

.291-.320

.321-.350

.351-.380

.381-.410

.411-.440

.441-.470

.471-.500

.501-.530

4002-24002-34002-44002-54002-64002-74002-84002-9

4002-104002-114002-124002-134002-144002-154002-164002-17

40S5-240S5-340S5-440S5-540S5-640S5-740S5-840S5-9

40S5-1040S5-1140S5-1240S5-1340S5-1440S5-1540S5-1640S5-17

4002-2S4002-3S4002-4S4002-5S4002-6S4002-7S4002-8S4002-9S

4002-10S4002-11S4002-12S4002-13S4002-14S

---------

40S5-2S40S5-3S40S5-4S40S5-5S40S5-6S40S5-7S40S5-8S40S5-9S

40S5-10S40S5-11S40S5-12S40S5-13S40S5-14S

---------

PhillipsSlotted

*S = .63 + (.03 x Dash No.)

Monadnock EquivalentStainless SteelSlotted 1142002-#Phillips 1142012-#

244-16

Carbon Steel Slotted 1142000-#Phillips 1142005-#

214-16

®

®

®

®




MARK IV TRIDAIR STRUCTURAL PANEL FASTENERSFeatures:♦ Superior strength♦ Positive stud bolt hold-out♦ Grommet design for composite metal♦ Grommet is great for gasketed applications, provides hard seat surface, superior load transfer and counterbore for retaining ring.♦ Retaining ring is replaceable and no tool is necessary to install♦ Unthreaded lead on stud bolt offers probing ability♦ Accommodates large variations in grip

STUD BOLT ASSEMBLYCA21037-4-#HS (1/4 size)CA21037-6-#HS (3/8 size)

RETAINING RINGCA21037-#R

FLAT BEAM NUT RECEPTACLESCA21021 (1/4 size)

GROMMETCA21038-#-#

CA21024 (3/8 size)

Second Dash # G - GripMin. Max.

- 4 SizeLength

-6 SizeLength

- 2- 4- 6- 8

.150

.291

.431

.571

.290

.430

.570

.710

.9721.1121.2521.392

1.1701.2101.3501.490

CA21037 - 4 - 10 HSHex Socket RecessL = 1.532;grip max = .8501/4 sizeBasic Part Number

FirstDash #

ThreadSize

ADia.

CDia.

DDia.

- 4

- 6

.2500-282 Lead

.3750-242 Lead

.440

.430.564.554

.375

.505Max. / Min.

.2495

.2470.3745.3730

Max. / Min.

sample part number

NominalSize Part # A

Dia. Finish

1/4

3/8

.355

.480

Passivated

Cad Plated, Type IIClass 2

CA21037-4R

CA21037C-4R

CA21037-6R

CA21037C-6R

Passivated

Cad Plated, Type IIClass 2

Nom.Size Part # L A C E

1/4

3/8

CA21038-4-1

CA21038-4-2

CA21038-4-3

CA21038-6-1

CA21038-6-2

CA21038-6-3

.105

.125

.145

.505max.

.630max.

.255max.

.395max.

.310

.465

Grip

.085

.105

.125

.085

.105

.125

.115

.135

.155

®




TRIDAIR STRUCTURAL PANEL FASTENERSFX10-1558SERIESFlush Head Style

FX10-15010SERIESFully RetractableFlush Head Style

RECEPTACLE ASSEMBLIESFX10-1502SERIES

HOLD-OUT GROMMETFX10-15009SERIESCorrosion Resistant

FX10-15030-1P CORROSION RESISTANT STEEL

RETAINING RINGFX10-1525Corrosion Resistant

Part #FX10-1525

AIRLOC FASTENERS AND SKYLOC FASTENERSFlush Head Length .609 Head Dia. 9/16

PINS RECEPTACLE GROMMET

LubricantCoating

Per MIL-L-25681

A*Ref.Part #Locking

Feature

FX10-1502High** Prevailing

Torque Eliptical None

.128

GD Dia. EAPart #

.500.630 .050FX10-15009-1

Basic StudAssemblyPart #

FX10-1558-1P

FX10-1558-2P

.35

.42

.41

.48

.150

.221

.220

.290

.010

.013

Weightlbs / ea.

Grip Range

Min MaxB

Ref.A

Ref.

StudAssemblyPart #

FX10-15010-1P .42 .41 .230 .290 .013

Weightlbs/ ea.

Grip Range

Min MaxB

Ref.A

Ref.

.171 - .180

.181 - .190

.191 - .200

.201 - .210

.221 - .230

.231 - .240

Stainless Steel.367.377.387.397.417.427

Grip A Steel98265-2-18098265-2-19098265-2-20098265-2-21098265-2-23098265-2-240

SK294186-2-180SK294186-2-190SK294186-2-200SK294186-2-210SK294186-2-230SK294186-2-240

SteelPart #

99947P130

Part #99836

SK99836S

MaterialSteel

Stainless295250-1

SteelPart #

®

®




WING HEADDZUS Stud

121J-W#-Z3CT

1/4AJW4-25AJW4-30AJW4-35AJW5-30AJW5-40AJW5-50

.100

.100

.150

.125

.190

.250

.250

.300

.350

.300

.400

.5005/16

Part # A B LH N TS W

.562

.437

.235

.200

.062

.050

1.125

.875

.437

.312

Alternate #

FLUSH HEADDZUS Stud

Alternate #126J-#-Z3CT

1/4

Part #FJ4-30FJ4-35FJ4-40FJ5-30FJ5-40FJ5-50

.150

.175

.200

.200

.225

.250

A B L.300.350.400.300.400.500

5/16

C G H N S

.437

.562

.050

.062

.200

.250

28°

30°

.100

.125

RETAININGSPRING

SX520SSSX523SSSX510SS

StudPart #345

StudSR3SSSR4SSSR5SS

Part #345

RETAININGRING

127H-3127H-4127H-5

GP3BGP4BGP5B

HALF GROMMET

Part #GP-Thermoplastic GH-Aluminium

Part #GH3GH4GH5

127P-3B127P-4B127P-5B

Alt. # Alt #

SPRING RECEPTACLES

StudSize

S3-150S3-175S3-200S3-225S4-200S4-225S4-250

S5A-200S5A-225S5A-250

Part #Rivet

Hole Space

.150

.175

.200

.225

.200

.225

.250

.200

.225

.250

3

4

5

5/8”

3/4”

1”

3150-Z3Y3175-Z3Y3200-Z3Y3225-Z3Y4200-Z3Y4225-Z3Y4250-Z3Y

A5200-Z3CTA5225-Z3CTA5250-Z3Y

Alt. #1219- Height

FULL GROMMETS

PanelThickness GA GF

.015 - .025

.026 - .050

.051 - .094

.026 - .050

.051 - .075

.031 - .062

.063 - .094

.095 - .125

GA3-175GA3-200GA3-250

GA4-250

GA4-275

GA5-312GA5-350GA5-375

---------

GF4-150

GF4-175

GF5-175GF5-225GF5-250

3

4

5

StudSize

Alt. #1271-317532003250

4250

4275

531253505375

Alt. #1276-

---------

4150

4175

517552255250

Part #AJ3-25AJ3-30AJ3-35AJ3-40AJ3-45AJ4-25AJ4-30AJ4-35AJ4-40AJ4-45AJ4-50AJ5-30AJ5-35AJ5-40AJ5-45AJ5-50

.075

.100

.150

.200

.225

.100

.100

.150

.200

.225

.250

.125

.125

.190

.190

.250

A B H.250.300.350.400.450.250.300.350.400.450.500.300.350.400.450.500

HEADDZUS Stud

121J-#-Z3CTC G L SN T

25°

28°

30°

3/16

1/4

5/16

.150

.200

.250

.038

.050

.080

.062

.085

.102

.312

.437

.562

.075

.100

.125

Alternate #

SLOTTED ®

®

®

GA# DommedGF# Flush




GH5 (Alt: 127H-5) RF5-5 (Alt: 2500-18F-5-C3C)

Stud Shank DimensionsL

StudA5B

T TotalThickness

DZUSA3.5T Series(A35T, A3-1/2T)

.031 - .060

.061 - .090

.091 - .102

.121 - .150

.151 - .180

.181 - .210

.211 - .240

.241 - .270

.271 - .300

.301 - .330

.331 - .360

Stud Shank DimensionsL

.290

.320

.350

.380

.410

.440

.470

.500

.530

.560

.590

StudA3.5B

T TotalThickness

.170

.170

.210

.250

.290

.290

.330

.370

.410

.410

.450

T6T9T12T15T18T21T24T27T30T33T36

Floating Receptacle

Rigid Receptacle

RF35 (Class A)Alternate # 2350-18F-ZCT

SpacerRetaining Spring

SX551SS

Snap Ring

SR35SS (1219-R35-SS)

GH Half Grommet

A5T

.021 - .050

.051 - .080

.081 - .110

.111 - .140

.141 - .170

.171 - .200

.201 - .230

.231 - .260

.261 - .290

.291 - .320

.321 - .350

.351 - .380

.350

.380

.410

.440

.470

.500

.530

.560

.590

.620

.650

.680

.170

.210

.250

.250

.290

.330

.370

.370

.410

.450

.490

.490

T5T8

T11T14T17T20T23T26T29T32T35T38

Floating Receptacle

R5 (Class B)2500-18-Z3CT

Rigid Receptacle

RF5 (Class A)2500-18F-Z3CT

Spacer

Retaining Spring

SX510SS

Snap Ring

SR5SS (1219-R5-SS)

GH Half Grommet

DZUSA5T Series

A3.5T

GA5 Series (Alt: 1271-#)

GA Full Grommet

R35 (Class B) 2350-18-Z3CT

DZUS TOOLING•For replacement of Dzus

studs with grommets•Will not set winged studs

Part # StudTP835ATP835BTP835CTP835DTP835E

AJ3AJ4FJ4AJ5FJ5

TP835A TP835BOld Style TP835C TP835D TP835E

Alternate Part #2351-20-##-Z3CT (Zinc Trivalent Chromate)2351-20-##-C3C (Cadmium Electroplated)

2501-20- ## -Z3CT (Zinc Trivalent Chromate)2501-20- ## -C3C (Cadmium Electroplated)

RF35-5 (Alt: 2350-18F-5-Z3CT)GH35 (Alt: 127H-35)

TP835BNew Style

Alternate #

Alternate Part #

Alternate #

Alternate #

®

Includes 2 x RF5-5 Spacers

Includes 2 x RF35-5 Spacers

®

®




Typical Assembly

PR35-1 FLAT STRIP

PR35 RIGHT-ANGLE STRIPFor mounting against a support member at right angle to thefastened panel or removable part. Material: Strip is aluminiumalloy (6061-T6). Wire is stainless steel Type 316.Available in 3, 5, 7, and 9 foot lengths.

PFSC35-#Alt. # 3506-SC#A-C3C

PF35-#Alt. # 3506-38-C3C

3 Foot LengthPR35SX3

Alt. # 3590-S35 Foot Length

PR35SX5Alt. # 3590-S5

For mounting against a support member in aplane with the fastened panel or removable part.Material: Strip is aluminium alloy(6061-T6),Wire is stainless steel Type 316.Available in 3, 5, and 7 foot lengths.

3 Foot LengthPR35-1S3

Alt. # 3595-S35 Foot Length

PR35-1S5Alt. # 3595-S5

Flat Strip

PFSC 35STUD ASSEMBLY

Panel ThickPFSC35-37APFSC35-38A

PFSC35-38AZBBPFSC35-39APFSC35-40A

PFSC35-44A

.050 - .059

.060 - .069

.060 - .069

.070 - .079

.080 - .089

.120 - .129

.070

.080

.080

.090

.100

.140

3506-SC37A-Z3CT3506-SC38A-Z3CT3506-SC38A-Z3BT3506-SC39A-Z3CT

3506-SC40A-Z3CT

3506-SC44A-Z3CT

Alternate

TP35AHTHand-squeeze tool for PFSC35pre-assembledfasteners.

CAPTIVE ¼-TURNFASTENERS• ¼-Turn fastening action offers operating convenience,predictable clamping force, and locked vibrationresistance.• Panel line fasteners combine those features with theversatility of continuous and closely-spaced panelfastening points, and the ease of flare-in studinstallation.• Receptacle strips are installed to frame out the consoleopening, serving as offset supports for the stud panel.Continuous stud holes and installation rivet holes areavailable every 3/8”.

RIGHT ANGLESINGLE HOLERECEPTACLE PRB3.5Alternate # 3518-B

Typical Studs

Stud Assembly B Dim

PFSC35-41AZBT 3506-SC41A-Z3BT .090 - .099 .110

AAE-TP35AHTConfined space tool. Hand-squeezeContact AAE for details.

CT - Zinc trivalent clearBT - Zinc trivalent black




Ø 5.6(.22)

Ø 9.5(.38) Max.

0.51(.020) 4.8

(.19)Approx.

EJECTORSPRING43-13-1-24

CLIP-ONRECEPTACLE82-47-113-15

WASHERS

82-43-201-38Black Synthetic Rubber

82-46-101-39Thermoplastic Cupped Wear Washer

RETAINERS82-32-101-20

Split Ring - Stainless

82-32-201-20Push-On - Stainless

82-32-301-12Thermoplastic - Black

18(.71)

0.64(.025)

7.1(.28)

7.9(.31)

15.9(.63)

For welding82-35-303-15

Rivet must not interfere with spring.

Ø 11.2(.44)

19 (.750)

9.5 (.38)

26.6 (1.05)5.66(.223)

3.2(.125)

For riveting- without base

Steel82-35-295-15Stainless82-35-295-20

Ø 11.9 (.47)

19 (.750)Countersink or dimple

Ø 2.6 (.098)

Swell rivet shank to

9.5 (.38)

26.2 (1.03)5.7(.22)

3.2(.125)

Ø 5.2 (.205)Ø 2.6 (.102)Ø 7.9 (.31)

Spring plate

Ø 2.7 (.107 )+.010-.000

+0.25-0.00

LEAF SPRING RECEPTACLES

For riveting- with base

82-35-302-15

Ø 11.9 (.47)

19 (.750)Countersink or dimple

Ø 2.6 (.098)

Swell rivet shank toØ 2.7 (.107 )

9.5 (.38)

26.2 (1.03)5.7(.22)

3.2(.125)

Ø 5.2 (.205)Ø 2.6 (.102)Ø 7.9 (.31)

+.010-.000

+0.25-0.00

Spring plate

NO. 82 STUD SELECTION CHARTTotal Material Thickness Stud Size

.090 - .109

.110 - .129

.130 - .149

.150 - .169

.170 - .189

.190 - .209

.210 - .229

100120140160180200220

SOUTHCONo. 82 Series1/4 Turn FastenersOval Head

DACROTISED STAINLESSSlotted Phillips Slotted PhillipsPart # Part # Part # Part #

82-11-100-1682-11-120-1682-11-140-1682-11-160-1682-11-180-1682-11-200-1682-11-220-16

82-19-100-1682-19-120-1682-19-140-1682-19-160-1682-19-180-1682-19-200-1682-19-220-16

82-11-100-2082-11-120-2082-11-140-2082-11-160-2082-11-180-2082-11-200-2082-11-220-20

82-19-100-2082-19-120-2082-19-140-2082-19-160-2082-19-180-2082-19-200-2082-19-220-20

(.375)

®




CLIP-ON RECEPTACLE15.1(.59)

11.1(.44)

20.6(.81)

0.8 (.03)10.3(.41) 1.6±0.8

(.06±.03)

26.2(1.03)

85-47-101-15

25.4 (1.000)38 (1.50)

Ø 14.3(.56)

9.3(.367)

14.3(.56)

4 (.155)

25.4 (1.000)38 (1.50)

Ø 14.3 (.56)

9.3(.367)

14.3(.56)

4 (.156)

3.1(.128)

Ø

3.3(.130)

Ø

BaseCountersink or dimple

LEAF SPRING RECEPTACLESFor riveting85-35-295-15 - Steel85-35-295-20 - Stainless

For welding85-35-296-15

EJECTOR SPRINGØ

14-18-150-24/5Ejector Spring 6.9

(.27)Ø

14.3(.562) Max.

0.9 (.035)

WASHERS

85-43-201-38Sealing Washer

85-46-101-39Cupped Natural Wear Washer

85-46-101-41Cupped Black Wear Washer

85-46-103-39Flat Wear Washer

RETAINERS85-34-101-20

Split Ring, Stainless

85-34-201-20Push-On, Stainless

85-34-301-12Nylon, Black

SOUTHCO NO. 85STUD SELECTION CHART

Total Material Thickness Stud Size.090 - .109.110 - .129.130 - .149.150 - .169.170 - .189.190 - .209.210 - .229.230 - .249.250 - .269.270 - .289.290 - .309

100120140160180200220240260280300

SOUTHCO(.562)

DACROTISED STAINLESSPart # Part #

85-11-120-1685-11-140-1685-11-160-1685-11-180-1685-11-200-1685-11-220-1685-11-240-1685-11-260-16

85-11-120-2085-11-140-2085-11-160-2085-11-180-2085-11-200-2085-11-220-2085-11-240-2085-11-260-20

No. 85 Series1/4 Turn FastenersSlotted, Oval Head

® ®




D2LD2D3LD3D4LD4D5D6LD6D8LD8D10LD10D416LD416D516LD516D616LD616D716LD716D816LD816D916LD916D1016LD1016D1216LD1216D1416LD1416D1616LD1616 ---

ALUMINIUM ALLOY CORROSION RESISTANTBLACK OXIDE COATING

ANODISED ALUMINIUMELECTRICALLY NONCONDUCTIVE

NAS1149 NAS1149 AN960 NAS1149AN960DN216HDN232HDN316HDN332HDN416HDN432HDN542HDN616HDN632HDN816HDN832HD0316HD0363HD0416HD0463HD0516HD0563HD0616HD0663HD0716HD0763HD0816HD0863HD0916HD0963HD1016HD1063HD1216HD1290HD1416HD1490HD1616HD1690H ---

KD2LKD2

KD3LKD3

KD4LKD4KD5

KD6LKD6

KD8LKD8

KD10LLKD10LKD10

KD416LKD416

KD516LKD516

KD616LKD616

KD716LKD716

KD816LKD816

KD916LKD916

KD1016LKD1016

KD1216LKD1216

KD1416LKD1416

KD1616LKD1616

DN216KDN232KDN316KDN332KDN416KDN432KDN542KDN616KDN632KDN816KDN832KD0316KD0332KD0363KD0416KD0463KD0516KD0563KD0616KD0663KD0716KD0763KD0816KD0863KD0916KD0963KD1016KD1063KD1216KD1290KD1416KD1490KD1616KD1690K

XC2LXC2

XC3LXC3

XC4LXC4XC5

XC6LXC6

XC8LXC8

XC10LLXC10LXC10

XC416LXC416

XC516LXC516

XC616LXC616

XC716LXC716

XC816LXC816

XC916LXC916

XC1016LXC1016

XC1216LXC1216

XC1416LXC1416

--- ---

CN216BCN232BCN316BCN332BCN416BCN432BCN542BCN616BCN632BCN816BCN832BC0316BC0332BC0363BC0432BC0463BC0532BC0563BC0632BC0663BC0732BC0763BC0832BC0863BC0932BC0963BC1032BC1063BC1232BC1290BC1432BC1490B --- -- -

AN960

AN960 / NAS1149 CROSS REFERENCE CHARTCARBON STEEL

2L2

3L3

4L45

6L6

8L8

10L10

416L416

516L516

616LL616L616

716L716

816L816

916L916

1016L1016

1216L1216

1416L1416

1616L1616

ANODISED ALUMINIUMCORROSION RESISTANT STEELNAS1149 AN960 NAS1149 AN960 NAS1149AN960FN216PFN232PFN316PFN332PFN416PFN432PFN542PFN616PFN632PFN816PFN832PF0332PF0363PF0432PF0463PF0532PF0563PF0616PF0632PF0663PF0732PF0763PF0832PF0863PF0932PF0963PF1032PF1063PF1232PF1290PF1432PF1490PF1632PF1690P

C2LC2

C3LC3

C4LC4C5

C6LC6

C8LC8

C10LC10

C416LC416

C516LC516

C616LC616

C716LC716

C816LC816

C916LC916

C1016LC1016

C1216LC1216

C1416LC1416

C1616LC1616

---

CN216RCN232RCN316RCN332RCN416RCN432RCN542RCN616RCN632RCN816RCN832RC0332RC0363RC0432RC0463RC0532RC0563RC0632RC0663RC0732RC0763RC0832RC0863RC0932RC0963RC1032RC1063RC1232RC1290RC1432RC1490RC1632RC1690R - --

JD2LJD2

JD3LJD3

JD4LJD4JD5

JD6LJD6

JD8LJD8

JD10LLJD10LJD10

JD416LJD416

JD516LJD516

JD616LJD616

JD716LJD716

JD816LJD816

JD916LJD916

JD1016LJD1016

JD1216LJD1216

JD1416LJD1416

JD1616LJD1616

DN216JDN232JDN316JDN332JDN416JDN432JDN542JDN616JDN632JDN816JDN832JD0316JD0332JD0363JD0416JD0463JD0516JD0563JD0616JD0663JD0716JD0763JD0816JD0863JD0916JD0963JD1016JD1063JD1216JD1290JD1416JD1490JD1616JD1690J

(MOST AN960 SERIES WASHERS SOLD BY AAE ARE DUAL CERTIFIED TO BOTH AN960 AND NAS1149 SERIES)




AN960Airframe Washer,Anodised AluminiumAnodised per MIL-A-8625

AN960KD#LAN960KDThinThick

KD4KD6KD8

KD10KD416KD516KD616KD716KD816

# 4# 6# 8# 101/45/163/87/161/2

To Fit DiaKD4LKD6LKD8LKD10L

KD416LKD516LKD616LKD716LKD816L

AN960Airframe Washer,Black Oxide CoatedCorrosion Resistant Steel

AN960XC#LAN960XCThinThick

XC4XC6XC8XC10

XC416XC516XC616XC716XC816

# 4# 6# 8# 101/4

5/163/8

7/161/2

To Fit DiaXC4LXC6LXC8L

XC10LXC416LXC516LXC616LXC716LXC816L

AN960Airframe Washer,Aluminium

ANODISED FINISH NATURAL FINISHAN960D#AN960JD#LAN960JD AN960D#L

ThinThickThinThickD3D4D6D8D10

D416D516D616D716D816D916D1016

---

# 3# 4# 6# 8

# 101/45/163/87/161/29/165/83/4

To Fit Dia

JD3JD4JD6JD8JD10JD416JD516JD616JD716JD816JD916

JD1016JD1216

D3LD4LD6LD8L

D10LD416LD516LD616LD716LD816LD916L

D1016L ---

JD3LJD4LJD6LJD8L

JD10LJD416LJD516LJD616LJD716LJD816LJD916L

JD1016LJD1216L

AN960Airframe Washer

CARBON STEEL

Thin ThickThick ThinAN960C AN960C#L

CORROSION RESISTANTAN960# AN960-#LTo Fit Dia.

2346810

416516616716816916101612161416

# 2# 3# 4# 6# 8# 101/4

5/163/8

7/161/2

9/165/83/47/8

C2C3C4C6C8C10

C416C516C616C716C816C916C1016C1216C1416

(MOST AN960 SERIES WASHERS SOLD BY AAE ARE DUAL CERTIFIED TO BOTH AN960 AND NAS1149 SERIES)

2L3L4L6L8L10L416L516L616L716L816L916L

1016L1216L1416L

C2LC3LC4LC6LC8LC10LC416LC516LC616LC716LC816LC916L

C1016LC1216LC1416L




Part #

A B

MS9549-08

MS9549-09

MS9549-10

Part # NominalSize

A Dia.+ .005

B Dia.+ .005

.164

.190

.250

.184

.213

.276

.375

.438

500

MS9549 Flat WasherCorrosion ResistantSteel, AMS 5510

CA3105Fairing Washer AssemblyNon-structural

6-32

8-32

10-32

Thread Length CA3105-632-6632-8832-8

832-101032-81032-9

1032-101032-111032-12

3/81/21/25/81/2

9/165/8

11/163/4

NAS1169Structural Washer1000 Dimpled Washer

DiameterNAS1169 NAS1169 NAS1169 NAS1169

#6#8

#10# 416

-6-8

-10-416

-6L-8L

-10L-416L

C6C8

C10C416

C6LC8L

C10LC416L

CORROSION RESISTANTCARBON STEELNAS1169 NAS1169

ALUMINIUM

DD6DD8

DD10DD416

DD6LDD8L

DD10LDD416L

C4C5C6C7C8C9

C10C12

-4-5-6-7-8-9

-10-12

MS20002MS20002COUNTERSUNK

1/4 5/16 3/8

7/16 1/2

9/16 5/8 3/4

To Fit Dia

MS20002High Strength Washer

PLAIN

AN970Wide Area Washer

AN970Bolt SizeAN3AN4AN5AN6AN7AN8AN9

AN10

-3-4-5-6-7-8-9

-10

AN970C3SC4SC5SC6S

C#S FOR 304CORROSION

RESISTANT STEEL(SPECIAL)

CARBON STEEL

TINNERMAN WASHER100o Countersunk. RoHS Compliant.Dash # -193 is New Revision / Supersedes Dash -24A

To Fit Dia.

#6 #8

#10 #10

Thickness

.012 .017 .020 .028

Part #A3236-012-193A3135-017-193A3235-020-193A3235-028-193

Part #EC1075-012-06SSEC1080-017-08SSEC1085-020-10SS

-------------

STAINLESS STEEL

®




INTERIOR FINISHING WASHER601-# & 603-#

To Fit Dia.

#4 #6 #8

#10

-4-6-8

-10

603Flush

601Countersunk

-4-6-8

-10

MS35338 (AN935)Split Washer“M” Indicates Zinc Yellow

MS35338-40M-41M-42M-43M-44M-45M-46M-47M-48M

AN935-4-6-8

-10-416-516-616-716-816

MS35338-135-136-137-138-139-140-141----------


MS35335 (AN936B)LockwasherExternal Tooth

To Fit Dia. #4 #6 #8

#10 1/4

5/16 3/8

7/16 1/2

MS35335 AN936 B4 B6 B8

B10 B416 B516 B616 B716 B816

-29-30-31-32-33-34-35-36-37

To Fit Dia. CORROSION RESISTANT

#2#4#6#8

#101/4

5/163/8

7/161/2

9/16

MS35333 (AN936A)Lockwasher, Internal Tooth“P” Designates Cad II Plating

A2CA4CA6CA8C

A10CA416CA516CA616CA716CA816CA916C

6970717273747576777879

AN936MS35333-35P36P37P38P39P40P41P42P43P44P45P

AN936A2A4A6A8

A10A416A516A616A716A816A916

CARBON STEELMS35333-

Part #FLUSH

NAS391B4PNAS391B6PNAS391B8P

NAS391B10P

NAS390NAS391Interior Finishing Washer

To Fit Dia.

#4 #6 #8

#10

Part #COUNTERSUNK

NAS390B4PNAS390B6PNAS390B8P

NAS390B10P




140-001-#Aluminium Washer

Thickness.140.167.203.140.110

.032

.040

.040

.032

.032

.438

.500

.625.3125.3125

Part #140-001-1140-001-3140-001-5140-001-9

140-001-11

O.D.I.D.

A1638-5Vulcanized FibreBone White

ThicknessTo Fit Dia..190 .031

NAS549F6NAS549F8

NAS549F10

#6#8

#10

Part #To Fit Diameter

NAS549Non-Metallic WasherInsulating, ElectricalAbsence of " F " indicates Phenolic Paper"F " after basic # indicates Fibre Insulation"L " indicates .031” Thickness

NAS549FL6NAS549FL8

NAS549FL10

Part #NAS549L6NAS549L8

NAS549L10

Part #

-06-08-09-10-11

.125

.164

.190

.250

.312

MS9321Diameter

MS9321Corrosion ResistantWasher

MS9320Nickel Cad PlatedSteel Washer

.164

.190

.250

.312

.375

-08-09-10-11-12

Diameter MS9320

MS9582Key WasherCorrosion Resistant,2700 Locking

MS9582Diameter-09-10-11

.190

.250

.312

MS9581Key WasherCorrosion Resistant,90 0 Locking

MS9581Diameter-09-10

.190

.250

-09-10-11

.190

.250

.312

MS9276Diameter

MS9276Key WasherCorrosion Resistant,1800 Locking

AN975Taper Pin Washer

#10#1/4

#5/16

AN975-3AN975-4AN975-5

To Fit Diameter Part #

Rivet Dia.1/8”

3/32”1/8”

5/32”3/16”




MS21206Plain or 45° Countersunk DesignAlloy Steel, Cadmium Plate Type II, Class 2

SizeCountersunk

MS21206B

MaxD

MaxI.D.

Max#101/4

5/16

3/81/2

C3C4C5

C6C8

.372

.470

.573

.679

.898

.195

.255

.318

.380

.505

.290

.350

.412

.507

.632

B

.D.I .D.I .D.I .D.I.D

NAS1197-6L-8L-10L

-416L

-516L-616L

NAS1197

NAS1197Aluminium Alloy Washer

I.D.#6#8

#101/4

5/163/8

-6-8

-10-416

-516-616

THICKNESS THICKNESS.016.016.016.016

.016

.016

.032

.032

.063

.063

.063

.063

NAS1515Nylon Washer “H”Teflon Washer “M”Thickness .063 / .031 (L)

NYLON WASHERTo Fit Dia.

.1120 .1380 .1640 .1900 .2500

H04LH06LH08LH3LH4L

H04H06H08H3H4

M04LM06LM08LM3LM4L

M04M06M08M3M4

NAS1515 NAS1515 NAS1515 NAS1515TEFLON WASHER

.032 THICKNESS .063 THICKNESSNAS1252NAS1252

# 4 # 6 # 8 # 10# 1/4

To Fit Dia.-4L-6L-8L

-10L-416L

-4H-6H-8H

-10H-416H

NAS1252Aluminium Washer

NAS620Flat WasherThickness .032 / .016 (L)

CORROSION RESISTANTCARBON STEELTo Fit Dia.

.1120

.1380

.1640

.1900

.2500

-4-6-8

-10-416

-4L-6L-8L

-10L-416L

C4C6C8

C10C416

C4LC6LC8L

C10LC416L

ALUMINIUM ALLOY

A4A6A8

A10A416

NAS620A4A6A8

A10A416

NAS620 NAS620 NAS620 NAS620 NAS620

0.062”Thick

PlainMS21206

-3-4-5

-6-8 Countersunk Type




Light washer ½ T(see above)

NAS1587High Temp. Washer (1200°F)Plain & Countersunk

Dash#

ThreadSize

A3C-3-4-5-6-7-8

.1900

.1900

.2500

.3125

.3750

.4375

.5000

.469

.469

.531

.593

.687

.781

.875

.195

.195

.256

.320

.383

.446

.509

.062N/A.078.078.078.078.078

N/A.032.062.062.062.062.062

NAS1587CCountersunk

NAS1587Plain

AOutside

Dia.

BInsideDia.

CCsk.Dia.

45°T

A

B

D

BC

A

.270N/A.339.401.489.550.612

TThickness

Csk.

Dash number designates thread sizeAdd “C” after dash number for countersunkAdd “L” after dash number for plain light washer.Thickness = ½ T (Not applicable to countersunk washer).

DThickness

Csk.

MS21299Washer, Plain & Countersunk

NominalSize

Dash # Csk Plain

.1900

.2500

.3125

.3750

.4375

.5000

C3C4C5C6C7C8

-3-4-5-6-7-8

.382

.486

.593

.707

.826

.945

.193

.253

.316

.378

.441

.503

.285

.345

.407

.502

.564

.627

AOutside

Diameter

BInside

Diameter

CCsk.

Diameter

B

A

0.057 - 0.069

Countersunk Plain

0.057 - 0.069

B C

A

45°

345

43678

429

1011121314151617

.125

.125

.156

.156

.156

.188

.219

.219

.250

.281

.312

.344

.375

.406

.438

.469

.500

.250

.312

.312

.250

.375

.375

.438

.500

.562

.625

.734

.688

.875

.8121.0

.9221.25

.022

.032

.035

.016

.049

.049

.049

.049

.065

.065

.065

.065

.083

.065

.083

.065

.083

MS27183Flat WasherSteel (Cad II Plating)

AMS27183- CB

B

A

C

MS15795Flat WasherCorrosion Resistant Steel

AMS15795- C801802803804805806845856807841846847849808842809810811812

B.078.094.125.125.156.156.172.172.188.188.203.203.203.219.219.250.281.312.344

.188

.250

.250

.312

.312

.375

.281

.312

.375

.438

.375

.562

.625

.438

.500

.562

.625

.734

.688

.020

.020

.022

.032

.035

.049

.031

.031

.049

.049

.020

.032

.040

.049

.049

.065

.065

.065

.065

B

A

C




PLUG BUTTON OLD NAS451-#CRS1008 / 1010 STEEL

Reference OnlyNAS451-#

Part # Hole HeadDiameter

HeadThickness

# ofProngs

0.3750.391

.037-.078

.078-.0930.5000.500

0.0620.062 6

NAS451-7NAS451-8

SS48192SS51003SS51043SS51051SS48152SS48172

NAS451-10NAS451-11NAS451-43NAS451-16

0.4380.4690.5000.625

.037-.047

.083-.125

.037-.062

.062-.078

0.6560.6250.6560.797

0.0780.0620.0780.078

SS50727SS51026SS48165SS51045SS50685SS48155

SS50726SS51058SS48132SS50834SS50841SS50890

NAS451-46NAS451-17NAS451-48NAS451-18NAS451-49NAS451-56

NAS451-30NAS451-31NAS451-54NAS451-55NAS451-33NAS451-58

0.6880.7500.7500.8120.8750.875

1.2501.3751.3751.5001.6251.750

.037-.062

.037-.093

.078-.109

.048-.078

.094-.171

.031-.093

.062-.093

.037-.078

.109-.141

.038-.141

.062-.078

.037-.094

0.8750.9380.9381.0631.0631.063

1.4381.5621.5621.6411.7971.938

0.0780.0940.0940.0620.0780.062

0.0940.0940.0940.0940.1250.125

8

12

PanelThickness

MS27980 SNAP FASTENERSStyle 2, Available in Bright Brass, Gov’t Black, & Nickel Plate

MS27980-6Socket

MS27980-1Button

Eyelets

MS27980-7Stud

** When ordering Snap Fasteners **At the end of the part # place a:

B for Gov’t Black finishN for Nickel Plate finish

Leave blank for Brass finish

Part # Size A Dim.MS27980-8MS27980-9

MS27980-10

123

9/32”11/32”13/32”

Stud - Machine ScrewBase

Part #MS27980-12MS27980-13MS27980-14

5/16”3/8”5/8”

A Dim.

Stud-Eyelet Combo

Size123

Size 1 Size 2 Size 3

Size 2 & 3 Not avail. in brass

MS27980-26MS27980-27

11/32”25/64”

Length Size12

Part #

P/N suffix “-K2915” for Zinc Plate

SS48143 NAS451-51 1.000 .062-.093 1.156 0.078




Length 1/16” Dia.

MS9245Cotter PinCorrosion & HeatResistant Steel

1/4”5/16”3/8”

7/16”1/2”

9/16”5/8”3/4”7/8”1”

1-1/8”1-1/4”1-1/2”

2”

1/8” Dia.MS9245-21MS9245-22MS9245-23MS9245-24MS9245-25MS9245-26MS9245-27MS9245-28MS9245-29MS9245-30

--------------------

3/32” Dia.--------------------

MS9245-42-----

MS9245-44MS9245-45MS9245-46MS9245-47MS9245-48MS9245-49

----------

---------------------------------------------

MS9245-64----------

MS9245-68MS9245-71

MS16562Spring Pin,Tubular, Slotted

Length

.250

.312

.375

.438

.500

.562

.625

.750

.8751.00

Corrosion Resistant Steel Carbon SteelDiameter & Dash #

.094 .125 .188 .094 .125-209-210-211-212-213-214-215-216----

-218

--------

-219-220-221----

-223-224----

-226

------------

-233-234----

-235-236--------

----22-23----25-26-27-28-29-30

-------31-32-33-34-35-36-37-38

Dia. & Dash #.062-190-191-192-193-194-195-196------------

MS16624MS16625Retaining RingsCirclips

Basic InvertedMS16624

-1025-1031-1037-1040-1043-1050-1062-1066-1087

-1100-4025-4031-4037-4043-4050-5012-5012-1-5018-1

-1025-1031-1037-1043-1050-1062-1068-1090-1112

-1118-1125-1143-1150-1168-1187-1200-1206-4125

MS16624 MS16625

Basic InternalMS16625

MS14155Washer, RecessedCountersunk Both Sides

Used with WheelBolts and NutsUp To & Including 180 KSI

1/45/163/8

7/161/2

.500

.615

.761

.873

.999

.253

.316

.378

.441

.503

.342

.404

.499

.561

.624

-4-5-6-7-8

D+ .002

I.D.+ .005

NominalSize VB

+ .005MS14155

.119 + .005

.119 + .005

.151 + .007

.151 + .007

.156 + .007

I.D. D B

V 45°+ 1°

45°+ 1°

NAS513Washer-Rod EndLocking

1/4-285/16-243/8-24

1/2-205/8-18

-4-5-6

-8-10

NAS513Terminal Thread Size

NAS1193Locking DevicePositive Index

ADia.

BDia..44

.50

.56

.63

C

.211

.270

.321

.380

.260

.323

.385

.448

NAS1193

K4C

K5C

K6C

K7C

To Fit Dia.

.2500-28

.3125-24

.3750-24

.4375-20

Refer to AAE eStore datasheet for size information




COTTER PIN MS24665(AN380, AN381)

---1/2”3/4”1”

1-1/4”1-1/2”1/4”1/2”3/4”1”

1/4”3/8”

7/16”1/2”3/4”1”

1-1/4”1-1/2”1-3/4”

2’2-1/2”

3”1/2”3/4”1”

1-1/4”1-1/2”1-3/4”

2”1/2”3/4”1”

1-1/4”1-1/2”1-3/4”

2”2-1/4”2-1/2”

3”1/2”3/4”1”

1-1/4”1-1/2”1-3/4”

2”2-1/4”2-1/2”

3”1-1/4”1-1/2”1-3/4”

2”2-1/2”2-3/4”

3”3-1/2”

4”

---579

10---65697173---------

132134136138140142143144145208210212214216218219281283285287289291292293294295349351353355357359360361362363421423425426428429430431432

---1-21-31-41-51-6---------------2-1---2-22-32-42-52-62-72-8

2-102-12---------------------3-23-33-43-53-63-73-83-9

3-103-124-24-34-44-54-64-74-8---

4-104-125-55-65-75-8

5-105-115-125-145-16

1/32

3/64

1/16

5/64

Diameter CARBON STEEL CORRISION RESISTANT STEEL

18222426272882868890

101110121013151153155157159161162163164227229231233235237238298300302304306308309310311312366368370372374376377378379380439441443444446447448449450

1-41-8

1-121-161-201-24---

15-815-1215-16

2-52-62-72-8

2-122-162-202-242-282-322-402-4825-8

25-1225-1625-2025-2425-2825-32

3-83-123-163-203-243-283-323-363-403-484-8

4-124-164-204-244-284-324-364-404-485-205-245-285-325-405-445-485-565-64

Length MS24665- AN380- MS24665- AN381-

5/32

3/32

1/8




ThreadSize AN310 AN310

C3C4C5C6C7C8C9

C10

-3-4-5-6-7-8-9

-10

10-321/4-28

5/16-243/8-24

7/16-201/2-20

9/16-185/8-18

Corrosion ResistantCarbon Steel

AN310

-3-4-5-6-7-8-9

-10

AN310Castellated Nut

ThreadSize

B H

10-321/4-28

5/16-243/8-24

7/16-201/2-20

9/16-185/8-18

.375

.438

.500

.563

.625

.750

.8751.000

7/161/2

37/6421/3223/32

7/81-1/641-5/32

1/49/32

21/6413/3229/649/16

39/6423/32

2,2104,0806,500

10,10013,60018,50023,60030,100

Uts. Min Lbs.Steel

A

HB

.016

+ .002- .010

A

AN320 AN320Carbon Steel Corrosion Resistant

6-408-32

10-321/4-28

5/16-243/8-24

7/16-201/2-20

9/16-185/8-18

-1-2-3-4-5-6-7-8-9

-10

C1C2C3C4C5C6C7C8C9

C10

AN320

-1-2-3-4-5-6-7-8-9

-10

AN320Shear Castellated Nut

ThreadSize

B H

.1380-40

.1640-32

.1900-32

.2500-28

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.6250-18

.313

.344

.375

.438

.500

.563

.625

.750

.8751.000

.359

.391

.438

.500

.578

.656

.719

.8751.0161.156

.156

.156

.188

.188

.188

.219

.219

.250

.313

.313

----

1,1052,0403,2505,0506,8009,250

11,80015,050

Uts. Min Lbs.Steel

30º

ThreadSize

+ .002- .010

A

HB.016

A




DashNo.

345

67

8

91012

204590

125225300400

6001,100

ThreadSize

MIL-S-8879

C

.1900-32

.2500-28

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.6250-18

.7500-16

1,0001,8002,9004,1005,0005,6007,800

10,00015,500

.367

.430

.492

.553

.679

.741

.865

.9281.052

.410

.482

.552

.622

.766

.837

.978

1.0511.191

Min

.376

.439

.502

.564

.690

.752

.877

.9401.064

A B

.203

.265

.390

.173

.235

.360

.234 .204

.328 .298

Min MinMaxMax

MS17826Self Locking Castellated Nut, Shear ApplicationLow Height, Nonmetallic (Nylon) Insert, 2500 F

B

C

A30º ±

MS17825Self Locking Castellated Nut, Tension Application (125 KSI)Nonmetallic (Nylon) Insert, 2500 F

DashNo.

-3-4

-5-6

-7-8-9

-10-12

3580

225325

575900

1,100

1,6002,800

ThreadSize

MIL-S-8879

CTest

WrenchingTorque

(Inch Lbs.)Min

.1900-32

.2500-28

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.6250-18

.7500-16

1,9503,500

5,5009,000

12,20016,60021,200

27,40040,000

.367

.430

.492

.553

.679

.741

.865

.9281.052

.410

.482

.552

.622

.766

.837

.978

1.0511.191

.376

.439

.502

.564

.690

.752

.877

.9401.064

A B

.265

.296

.343

.421

.468

.578

.624

.734

.828

UltimateTensile

StrengthLbs. MinMinMin MinMax Max

A

B

C

30º ± 5º

.235

.266

.313

.391

.438

.548

.594

.704

.798

A

B

C

B

C

A

TestWrenching

Torque(Inch Lbs.)

Min

UltimateTensile

StrengthLbs. Min




Dash No.

-3-4-5-6-7-8-9

-10

H W

.252

.315

.378

.440

.504

.566

.692

.755

.243

.305

.367

.429

.492

.554

.678

.741

ThreadSize

MIL-S-8879

C

L3L4L5L6L7L8L9L10

NonDryLube

.1900-32

.2500-28

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.6250-18

Max MinMax MinMin Min

.203

.203

.203

.234

.234

.265

.328

.328

.173

.173

.173

.204

.204

.235

.298

.298

.291

.386

.482

.539

.600

.725

.815

.875

.277

.348

.419

.480

.552

.623

.765

.836

DryLube Max

.325

.420

.520

.579

.645

.770

.850

.910

A B

MS14145

Self-Locking Castellated Nut, Shear ApplicationBlack Moly Coat or CAD II Plated , Thin, Lightweight, 4500 F

Thread Size

MS14144

Self Locking Castellated Nut, Tension Application (160 KSI)Black Moly Coat or CAD II Plated, Lightweight, 4500 F

Dash No.

-3-4-5-6-7-8-9

-10

H W

.252

.315

.378

.440

.504

.566

.692

.755

.243

.305

.367

.429

.492

.554

.678

.741

ThreadSize

MIL-S-8879

C

L3L4L5L6L7L8L9L10

NonDryLube

.1900-32

.2500-28

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.6250-18

Min

.265

.296

.343

.421

.468

.578

.624

.734

.235

.266

.313

.391

.438

.548

.594

.704

.291

.386

.482

.539

.600

.725

.815

.875

.277

.348

.419

.480

.552

.623

.765

.836

DryLube Max

.325

.420

.520

.579

.645

.770

.850

.910

A B

MS14144

Min Max Min Max Min

Black Moly (Dry Film Lube) CAD II Plated

Black Moly (Dry Film Lube)




Carbon Steel

440A632A832A

1032A428A524A624A720A820A918A

1018A

N04N06N08N3N4N5N6N7N8N9N10

4-406-328-32

10-321/4-28

5/16-243/8-24

7/16-201/2-20

9/16-185/8-18

C04C06C08C3C4C5C6C7C8------

Corrosion ResistantThreadSize MS21083MS20364-MS21083

Aluminium

D04D06D08D3D4D5D6D7D8------

MS21083

MS21083

D04D06D08D3D4D5D6D7D8D9D10

B

.251

.313

.345

.376

.439

.502

.564

.690

.752

.877

.940

.243

.305

.336

.367

.430

.492

.553

.679

.741

.865

.928

ThreadSize

MIL-S-8879 MinMax MinMax Min.125.141.188.188.219.266.282.328.328.375.407

.094

.110

.157

.157

.188

.235

.251

.298

.298

.344

.376

.1120-40

.1380-32

.1640-32

.1900-32

.2500-28

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.6250-18

.268

.339

.374

.410

.482

.552

.622

.766

.837

.9781.051

AL Alloy Steel Cres.


C04C06C08C3C4C5C6C7C8C9C10

MS21083Self Locking Nut, Low Height, Nylon Insert, 250o F

A C

AB

C

Carbon Steel

440A632A832A

1032A428A524A624A720A820A918A

1018A

N04N06N08N3N4N5N6N7N8N9

N10

4-406-328-32

10-321/4-28

5/16-243/8-24

7/16-201/2-20

9/16-185/8-18

C04C06C08C3C4C5C6C7C8------

Corrosion ResistantThreadSize MS21044MS20365-MS21044

Aluminium

D04D06D08D3D4D5D6D7D8------

MS21044

MS21044

D04D06D08D3D4D5D6D7D8D9D10

B

.251

.313

.345

.376

.439

.502

.564

.690

.752

.877

.940

.243

.305

.336

.367

.430

.492

.553

.679

.741

.865

.928

ThreadSize

MIL-S-8879 MinMax MinMax Min

.157

.188

.281

.281

.360

.360

.469

.469

.610

.704

.766

.133

.160

.219

.208

.240

.271

.318

.435

.575

.623

.732

.1120-40

.1380-32

.1640-32

.1900-32

.2500-28

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.6250-18

.268

.339

.374

.410

.482

.552

.622

.766

.837

.9781.051

AL Alloy Steel Cres.


C04C06C08C3C4C5C6C7C8C9C10

MS21044Self Locking Nut, Regular Height, Nylon Insert, 250o F

A C

B

C

A




REPLACED BYMS20500-428

Part # MaterialThread

22022STD1410

64396721247

5/16-245/16-18

1/4-28

BRASS

STEEL

Engine

CONTINENTAL

LYCOMING

MISC. NUTSPart #

AN3066-12BACN10JC8BACN10YD2BACN10YD3BACN10YD4

GYN145H22-4

EXHAUSTMANIFOLDNUTS

NewCommercial #

ThreadSize

Pal NutSuffix ‘S0G’ and -214are interchangeable

Old #MS27151

10 - 321/4 - 28

5/16 - 243/8 - 24

7/16 - 20

RM103200S0GRF142800S0GRF516240S0GRF382400S0GRL716200S0G

-7-13-16-19-21

MS20500Self Locking NutHeat Resistant, Corrosion Resistant, 1200o F, Silver Plated

DashNo.

-1032-428-524-624

H W

.376

.439

.502

.564

.367

.430

.492

.553

ThreadMIL-S-8879

NMin

.210

.273

.336

.398

Max MinMax Min.202.280.312.421

.413

.488

.557

.628

10-321/4-28

5/16-243/8-24

.250

.328

.360

.469

C

NAS679CHexagon NutSelf-Locking A286 CRES"C#M" Indicates 450o Use, Dry Film Lube"C" Indicates Silver Plated for 800o Use"W" Indicates Internal Wrenching Feature

NAS679CThread Size6-32 C06M

C08MC08MWC3MWC3W

C4MWC4W

8-32

10-32

1/4-285/16-24 C5

NAS679Self Locking Nut, Low Height"A" After Base # Indicates All Metal"W" Indicates Internal Wrenching Feature"C" Indicates A286 CRES, Silver Plated for 800o F"M" Indicates Dry Film Lubricant for 450o F

Dash No. B450o FMax MinMax

.1120-40

.1380-32

.1640-32

.1900-32

.2500-28

.3125-24

.3750-24

.4375-20

.289

.361

.390

.430

.506

.580

.650

.790

STEEL CRESC04C06C08C3C4C5C6C7

A C

.240

.302

.334

.365

.430

.492

.553

.679

.252

.314

.346

.377

.439

.502

.564

.690

.125

.141

.188

.188

.219

.266

.282

.328

800 o F

C04MC06MC08MC3MC4MC5MC6MC7M

A04A06A08A3A4A5A6A7

ThreadSize

NAS679AThread Size4-406-328-32

10-321/4-28

5/16-243/8-24

7/16-20

A04WA06WA08WA3WA4WA5A6A7

CRES




AN121501, AN121502, AN121503Plain Nut, Steel AMS 6322(Old AN360 Engine Nut)

B HThreadSize Min Max Min

.190-32

.250-28.3125-24

.367

.430

.492

.376

.439

.502

.419

.491

.561

.156

.219

.266

A

AN121501AN121502AN121503

Part #B

A

H

.016

MS21046CAll Metal 800 o Full Height

Thread Size MS21046C04C06C08C3C4C5C6C7C8

4-406-328-32

10-321/4-28

5/16-243/8-24

7/16-201/2-20

MS21045LAll Metal, Dry Film Lube

Thread Size MS21045L04L06L08L3L4L5L6L7L8

4-406-328-32

10-321/4-28

5/16-243/8-24

7/16-201/2-20

440632832

1032428524624---

AN363-720820918

1018

04060834567

---89

10

C04C06C08C3C4C5C6C7---C8------

Carbon Steel

4-406-328-32

10-321/4-28

5/16-243/8-24

7/16-207/16-201/2-20

9/16-185/8-18

Corrosion ResistantDry Film LubeThread

SizeMS21045AN363-MS21045- F

A

C

B

MS21045 (AN363)Self Locking Nut, Regular Height, All Metal, 450o F

Dash Number

-04-06-08-3-4-5-6-7-8-9

-10

B

.243

.305

.336

.367

.430

.492

.553

.679

.741

.865

.928

.615

ThreadSize

MIL-S-8879 MinMax MinMax Min.167.188.250.250.328.360.469.469.610.705.766.469

.133

.160

.219

.208

.240

.271

.318

.435

.575

.623

.732

.453

.1120-40

.1380-32

.1640-32

.1900-32

.2500-28

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.6250-18

.4375-20

.268

.339

.374

.410

.482

.552

.622

.766

.837

.9781.051.705

DryLubricant

CorrosionResistant

C04C06C08C3C4C5C6C7C8C9

C10

A C

L04L06L08L3L4L5L6L7L8L9

L10

Min

F

AN363-720

Non-DryLubricant

.044

.072

.091

.085

.116

.123

.153

.178

.221

.243

.274

.178

.243

.305

.336

.367

.430

.492

.553

.679

.741

.865

.928

.615

B

C

A

F

A

B

H




AN316

-4-5-6-7-8-9

-10

ThreadSize

BApprox. H

1/4-285/16-243/8-24

7/16-201/2-20

9/16-185/8-18

.438

.500

.563

.625

.750

.8751.00

1/237/6421/3223/32

7/81-1/641-5/32

1/85/323/167/321/4

9/325/16

AN316Hexagon Jam Nut, Low HeightAdd suffix R for Right Hand ThreadAdd suffix L for Left Hand Thread

TensileStrength

2,0403,2505,0506,8009,250

11,80015,050

AN316-Thread Size10-321/4-28

5/16-243/8-24

7/16-201/2-20

9/16-185/8-18

(Use AN315)4R5R6R7R8R9R

10R

AN316-(Use AN315)

4L5L6L7L8L9L

10L

A

H

B

30º

A+.002-.010

AN315Hexagon Plain NutAdd suffix R for Right Hand ThreadAdd suffix L for Left Hand Thread

AN315-Thread Size10-321/4-28

5/16-243/8-24

7/16-201/2-20

9/16-185/8-18

3R4R5R6R7R8R9R

10R

AN315-3L4L5L6L7L8L9L

10L

AN315C3RC4RC5RC6R------------

AN315

-3-4-5-6-7-8-9

-10

ThreadSize

BApprox

H

10-321/4-28

5/16-243/8-24

7/16-201/2-20

9/16-185/8-18

.375

.438

.500

.563

.625

.750

.8751.000

7/161/2

37/6421/3223/32

7/81-1/641-5/32

9/643/16

15/649/32

21/643/8

27/6415/32

TensileStrength

Steel2,2104,0806,500

10,10013,60018,50023,60030,100

A

B

H

30º

.016

A+.002-.010

A

B

H

A

H

B




MS35650Plain Hex NutFine Thread

Thread Size

4-486-408-36

10-321/4-28

5/16-243/8-24

Dash Number

-342-362-382-302

-3252-3312-3382

Cres.Steel

G H

.098

.114

.130

.130

.193

.225

.257

.087

.102

.117

.117

.178

.208239

ThreadSize

F

-344-364-384-304

-3254-3314-3384

CarbonSteelCAD

Brass

-345-365-386-305

-3255-3315-3385

.1120-48

.1380-40

.1640-36

.1900-32

.2500-28

.3125-24

.3750-24

Max MinMax MinMax Min

.289

.361

.397

.433

.505

.650

.722

.275

.344

.378

.413

.482

.621

.692

.250

.312

.344

.375

.437

.562

.625

.241

.302

.332

.362

.423

.545

.607

MS35650-342362382302

325233123382

MS35650-344364384304

325433143384

MS35650-345B365B386B305B

3255B3315B3385B

Brass, Black OxideCorrosion ResistantSteel

MS35649Plain Hexagon NutCoarse Thread

Dash Number

-222-242-262-282-202

-2252-2312

Cres.Steel

G H

.066

.098

.114

.130

.130

.193

.225

.057

.087

.102

.117

.117

.178

.208

ThreadSize

F

-224-244-264-284-204

-2254-2314

CarbonSteelCAD

Brass

-225-245-265-286-205

-2255-2315

.0860-56

.1120-40

.1380-32

.1640-32

.1900-24

.2500-20

.3125-18

Max MinMax MinMax Min

.217

.289

.361

.397

.433

.505

.650

.205

.275

.344

.378

.413

.482

.621

.187

.250

.312

.344

.375

.437

.562

.180

.241

.302

.332

.362

.423

.545

MS35649-Thread Size

2-564-406-328-32

10-241/4-20

5/16-18

222242262282202

22522312

MS35649-224244264284204

22542314

MS35649-225B245B265B286B205B

2255B2315B

Brass, Black OxideCorrosion ResistantSteel




DASHNO.524624

SPS Part #22FH52422FH624

22FHSelf Locking Flexloc Nut, HexagonRegular Height, Carbon Steel 450o F

SMin

W

.492

.553

TThread

HMax

.312-24

.375-24.492.553

.561

.631.150.210

.353

.482

CMin.

BMin Dia.

.502

.564

T

C

WB

HS

Max Min

DashNo.632832

1032428524624

SMin

W

.305

.336

.367

.430

.492

.553

ThreadSize

HMax

.138-32

.164-32

.190-32

.250-28

.312-24

.375-24

.305

.336

.367

.430

.492

.553

.347

.383

.419

.481

.561

.631

.036

.070

.065

.075

.097

.108

.141

.188

.188

.219

.266

.282

27FT Self Locking Hexagon Nut, Thin, Carbon Steel 450o F

CMin

BMin Dia.

.313

.345

.376

.439

.502

.564

SPSPart #

For Ref. OnlyMS20364-

27FT63227FT832

27FT103227FT42827FT52427FT624

632C832C

1032C428C524C624C

HS

B

C

W

Max Min

NAS1291Self Locking NutLow Height, Lightweight

NAS1291Thread

Size8-32

10-321/4-28

5/16-243/8-24

7/16-201/2-205/8-18

C08MC3MC4MC5MC6MC7MC8MC10M

Dash Number

.1380-32

.1640-32

.1900-32

.2500-28

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.6250-18

H WThread

Size B

"M" indicates Dry Film Lube"C" indicates Corrosion Resistant Steel

450 o F A800 o FSTEEL A286 CRES A286 CRES

-------------------7-8-9-10

C06MC08MC3MC4MC5MC6MC7MC8MC9M

C10M

------------------C7C8C9

C10

.141

.115

.188

.125

.188

.154

.219

.204

.266

.251

.282

.267

.328

.313

.410

.350

.480

.420

.550

.490

.244

.290

.330

.420

.520

.620

.708

.814

.9121.014

.055

.060

.065

.090

.120

.125

.160

.225

.320

.365

.190

.181

.221

.213

.252

.243

.316

.304

.378

.367

.440

.430

.504

.494

.566

.556

.692

.680

.755

.743

NAS1291 - - - - -

C7C8

C10

SteelNAS1291

------7-8

-10

Corrosion Resistant 800°FCorrosion Resistant 450°F




MS21043Self Locking NutHeat Resistant, Reduced Hexagon, Reduced HeightCorrosion Resistant, 800o F, Silver Plated

DashNo.

H

.158

.190

.221

.252

.316

.378

.440

.150

.181

.213

.243

.304

.367

.430

ThreadSize

CMin

.206

.244

.290

.330

.420

.520

.620

Min.125.141

.219

.266

.282

.103

.115

.125

.154

.204

.251

.267

4-406-328-3210-321/4-28

5/16-243/8-24

.171

.207

.244

.277

.347

.419

.491

AMaxDia.

.188

-04-06-08-3-4-5-6

W

MaxMinMax

.188

MS21042Self Locking Nut, Reduced Hexagon, Reduced HeightNon-Corrosion Resistant Steel 450 o

MS21042Thread Size

2-564-406-328-32

10-321/4-28

5/16-243/8-24

-02-04-06-08-3-4-5-6

.0860-56

.1120-40

.1380-32

.1640-32

.1900-32

.2500-28

.3125-24

.3750-24

L02L04L06L08L3L4L5L6

-02-04-06-08-3-4-5-6

DashNo.

ThreadSize

CMin

AMaxDia.

HW

ACROSSFLATS

Max.138.171.207.244.277.347.419.491

.167

.206

.244

.290

.330

.420

.520

.620

.100

.125

.141

.188

.188

.219

.266

.282

.080

.103

.115

.125

.154

.204

.251

.267

.127

.158

.190

.221

.252

.316

.378

.440

.122

.150

.181

.213

.243

.304

.367

.430

with Dry Film Lube without Dry Film LubeMS21042

Min Min Max

without Dry Film Lube

with Dry Film Lube




.4375-20

.5000-20

.5625-18

.6250-18

.7500-16

.8750-141.000-12

AB

C DNAS1022

A7

A8A9

A10

A12A14A16

.328

.328

.375

.407

.422

.485

.578

.790

.8701.0101.080

1.2301.4401.660

.458

.531

.594

.656

.787

.9131.039

Min.690

.752

.877

.940

1.0641.2521.440

Max.679

.741

.865

.928

1.0521.2391.427

Thread Size

NAS1022Self Locking NutHexagon Low HeightLow Strength Steel 450° F

MS21245Self Locking NutHexagon, Thin450° F, 80 KSI

ThreadSize

.4375-20

.5000-20

.5625-18

.6250-18

.7500-16

.8750-14

MS21245

L7L8L9

L10

L12L14

MS21245

NON-DRYLUBE

DRYLUBE

-7-8

-9-10

-11-12

.448

.521

.584

.646

.777

.903

.478

.551

.614

.676

.807

.933

.765

.836

.978

1.050

1.1921.405

A CD

.328

.328

.375

.407

.422

.485

Min Max.458.531.594

.656

.787

.913

FW

Min Max.690.752

.877

.940

1.0641.252

.679

.741

.865

.928

1.0521.239

C

W

F

MFGID

30°+ 5°

88° MIN

A

E

D

E2

C

F

B

H

.016 + .010PART # HERE

LOCATIONOPTIONAL

THREAD T COUNTERSINKOPPOSITE END ONLY 110° TOOUTSIDE DIA. OF THREAD

CHAMFER ON BOTTOMFACE 15° TO DIMENSION BOPTIONALMS21025

Castellated Hexagon NutAlloy Steel 450° F

B C D E F

1.2501.2501.500

1.7502.1252.250

.531

.500

.562

.562

.562

.656

.219

.250

.250

.312

.312

.312

.156

.156

.156

.156

.172

.172

1.4481.4481.732

2.0212.4542.596

ThreadSize Pitch

.9375-161.000-161.250-16

1.500-161.750-162.000-16

.8969

.9594.1.2094

1.45941.70941.9594

MS21025

-15-16-20

-24-28-32

A

BC

B

E_




AN256Right Angle NutSelf-Locking, 250°F

ThreadSize6-328-3210-32

Part #Aluminium Steel

AN256-6AN256-8

AN256-10

AN256F6AN256F8AN256F10

.281

.031 MAX

.469

.141 RAD

NUT-SELF.468

REF.859

.250 + .003

.313

30°

90°

.062 MIN

PLATE

LOCKING INSERT

.063 RAD

FROM TURNINGSECUREDNUT SHALL BE

CORNER MAYBE SQUARE

.098 - .000+ .005

2 REQD

F22NKM, F22NKTMHex Nut with Nylon CapCadmium II plated

Part #

6-328-32

10-326-328-32

10-32

F22NKM-62F22NKM-82F22NKM-02

F22NKTM-62F22NKTM-82F22NKTM-02

Approx.Height

.297

.353

.363

.249

.308

.308

NKM NKTM

KFN600K-Fast Nut, 6 Point, Shear Pin7075 Aluminium Alloy {QQ-A-225/9} or7175 Aluminium Alloy {QQ-A-430}

KFN600 Thread

.1640-32

.1900-32

.2500-28

.3125-24

-08-3-4-5

A B C D

.200

.226

.286

.348

W TensileStrength

1,4001,6003,0005,000

.216

.247

.309

.371

.242

.277

.348

.419

.273

.295

.398

.497

.290

.320

.420

.535

H

.270

.280

.340

.430

M

.107

.107

.112

.122

S

.060

.070

.090

.160

LOCATIONIDENTIFICATIONMANUFACTURER’S

UPPER THREAD FORMED

SELF-LOCKING ACTIONOUT-OF-ROUND TO PROVIDE

A D

M

C

WH

B

S

KFN587K-Fast Nut, 6 Point, Self-Locking7075 Aluminium Alloy {QQ-A-225/9}

KFN587

A D

M

C

W H

UPPER THREAD FORMED

SELF-LOCKING ACTIONOUT-OF-ROUND TO PROVIDE

LOCATIONMFG. ID.

Thread

.1640-32

.1900-32

.2500-28

.3125-24

-08-3-4-5

A C D H

.230

.240

.280

.325

W TensileStrength

1,4001,6003,0005,000

.216

.247

.309

.371

.171

.198

.259

.322

.242

.277

.348

.419

.290

.304

.410

.515

M

.087

.087

.092

.097

D

3 places

B

A

NAS1423Drilled Jam Nut“LH” Suffix IndicatesLeft Hand Thread

NAS1423-3

-4-5-6-8-10-12

Thread.375

.438

.500

.563

A CB D.1900-32

.2500-28

.3125-24

.3750-24

.411

.484

.555

.628

.053

.056

.058

.060

.125

.125

.125

.125.5000-20.6250-18

.7500-16

.7501.000

1.125

.8441.128

1.271

.093

.093

.125

.156

.203

.250

D2

ADia.

C

D2D

ADia.

3 placesC

B

A

NAS509Drilled Jam Nut“C” Indicates A286 CRES“L” Indicates Left Hand Thread

NAS509 Thread.1900-32.2500-28.3125-24.3750-24.4375-20.5000-20

-3-4-5-6-7-8

A C B D.375.438.500.563.625.750

.053

.056

.058

.060

.063

.093

.411

.484

.555

.628

.700

.844

.156

.188

.219

.250

.281

.313

ThreadSize




NAS1805Self-Locking Nut, Extended WasherDouble Hexagon, Full HeightA286 CRES, 180 KSI, 450 o F and 800o

FNo Letter Indicates Unplated, Passivated"L" Indicates Dry Film Lubricant, Cadmium Plated"P" Indicates Silver Plated, No Lubricant

DashNo.

-3-4

-4L-4P-5

-5L-5P-6

-6L-6P-7

-7L-8

HMax

W

.243

.305

.305

.305

.367

.367

.367

.430

.430

.430

.553

.553

.616

ThreadSize

C

.1900-32

.2500-28

.2500-28

.2500-28

.3125-24

.3125-24

.3125-24

.3750-24

.3750-24

.3750-24

.4375-20

.4375-20

.5000-20

.339

.434

.434

.434

.532

.532

.532

.631

.631

.631

.729

.729

.828

.299

.394

.394

.394

.492

.492

.492

.591

.591

.591

.689

.689

.788

Max Min.190.250.250.250.312.312.312.375.375.375.438.438.500

.277

.347

.347

.347

.418

.418

.418

.490

.490

.490

.631

.631

.703

BDia.Min

ADia.

.251

.313

.313

.313

.376

.376

.376

.439

.439

.439

.564

.564

.627

NAS1804Self-Locking Nut, Extended WasherDouble Hexagon, Full HeightAlloy Steel - 180 KSI, 450o F

DashNo.

-3-4-5-6

-6N-7-8

HMax

W

.243

.305

.367

.430

.430

.553

.616

ThreadSize

CMin

.1900-32

.2500-28

.3125-24

.3750-24

.3750-24

.4375-20

.5000-20

.339

.434

.532

.631

.631

.729

.828

.299

.394

.492

.591

.591

.689

.788

Max Min.190.250.312.375.375.438.500

.277

.347

.418

.490

.490

.631

.703

BDia.Min

ADia.

.251

.313

.376

.439

.439

.564

.627

Suffix ‘N’ for No Black Moly Lube

NAS9926Self-Locking Nut, Double Hexagon (12 Point)Low Height, 160 KSI, 450Cadmium Plated, A286 CRES

Dash No.-3L-4L-5L-6L

HThread Size C.1900-32.2500-28.3125-24.3750-24




EB - DOUBLE HEX NUTHigh Tensile 180 KSI (2500 F)

ESNAPart #

EB-048

EB-054EB-064EB-070

EB-080EB-098

.531

.593

.687

.781

.875

.968

.090

.090

.099

.107

.118

.127

ThreadSize

CRef.

.2500-28

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.376 - .367

.439 - .430

.502 - .492

.564 - .553

.627 - .616

.690 - .679

.420

.491

.562

.633

.704

.774

.334

.396

.453

.516

.563

.625

AMax

BMin

D FRef.+.000

-.010

DHN35-4DHN35-5DHN35-6DHN35-7

DHN35-8DHN35-9

BRISTOLPart #

6,98011,10017,10023,200

30,90039,200

UltimateTensileStrengthLbs. Min

42FLW (CAD I PLATED)47FLW (CAD II PLATED)Double Hexagon, FlexlocSelf-Locking Alloy SteelFlanged, 180 KSI Lightweight 4500 F

DashNo.

428524624720820918

1018

W

.376

.439

.502

.564

.627

.690

.783

.367

.430

.492

.553

.616

.676

.772

ThreadSize

CMin

.444

.547

.654

.753

.863

.9381.050

Max Min.419.491.561.631.703.775.881

.290

.363

.438

.506

.549

.600

.650

.250-28

.312-24

.375-24

.437-20

.500-20

.562-18

.625-18

.414

.517

.624

.713

.823

.8981.000

AMax

BMin

HMax

7,27011,50017,10023,20030,90039,10049,100

AxialStrengthLbs. Min

A

C

W

H

B

PH135M - METRIC NUTS / K-NUTSCAD Plated, Dry Film Lubricant1100 MPa (235 0 C)

Part #

345

5.4

7

8.5

1.21.52.32.3

3.34

ThreadSize

HMax

M3 x 0.5

M4 x 0.7M5 x 0.8M6 x 1.0

M8 x 1.25M10 x 1.5

4.25.36.57.6

10.913.2

4567

1012

68

9.210.5

13.616.6

AMax W

CMin F

SMin

3PH135M4PH135M5PH135M6PH135M

8PH135M10PH135M

10.5 4.5M12 x 1.5 15.5 1419.812PH135M

Part #

7.2

9

3.23.8

ThreadSize

HMax

M8 x 1.0M10 x 1.25

10.913.2

1012

13.616.6

AMax W

CMin

SMin

8100PH135M10125PH135M

10.8 4.5M12 x 1.25 15.5 1419.912125PH135M




MS25082Hexagon NutThin Electrical

ThreadMS25082-2-3

-12-4

-13

.1640-32

.1900-32

.2500-28

H.078.078.078.089.078

C.194.220.220.280.280

B.388.423.282.495.352

A.338.369.246.433.307

NAS578-4A-5A-6A-7A-8A

H CD J.625.688.750.8751.000

.275

.335

.400

.464

.527

.406

.469

.531

.594

.656

.453

.500

.594

.672

.750

H.406.469.531.594.656

NAS578Floating BarrelNut Retainer

NutElementSpacing

Max #of Nut

Element3-63-73-83-9

3-103-113-123-16

.750

.8751.0001.1251.2501.3751.5002.000

9682726457524836

Part #MS21063L

MS21063Gang ChannelSelf Locking Nuts, FloatingLow Height, Steel, 125KSI, 250

o F,

.190-32 Thread, 6 Ft. Length

NAS577BFloating Barrel NutSelf Locking,180 KSI

NAS577B Thread Hole Min / Max

.2500-28

.3125-24

.3750-24

.4375-20

.5000-20

4A5A6A7A8A

.513

.575

.669

.763

.857

.531 - .535

.594 - .599

.688 - .693

.781 - .788

.875 - .882

A D.406.468.531.625.703

.625

.688

.750

.8751.000

B

AB

THREAD

D

.0625 MIN

SOUTHCOCowling Mount82-35-306-10

J7444-14

J7444-24J7444-36

Part #

LORD COWLINGMOUNTS

ThreadShur-LokPart #

Max. EdgeDistance

InstallationHole Size

PanelThickness

SHUR-LOKCLIP NUT

ThreadShur-LokPart #

Max. EdgeDistance

InstallationHole Size

PanelThickness

SL210-06-1SL210-06-2SL210-08-2SL210-3-1SL210-3-2SL210-3-3

SL211-06-1SL211-08-1SL211-3-1SL213-08-1SL215-3-1

SL210 SL211 SL213 SL215

6-326-328-32

10-3210-3210-32

6-328-3210-328-3210-32

.250

.250

.250

.250

.250

.250

.190 - .229

.190 - .229

.190 - .229

.218 - .261

.218 - .261

.218 - .261

.020 - .060

.060 - .125

.060 - .125

.020 - .060

.060 - .125

.125 - .187

.375

.375

.375

.500

.620

.190 - .229

.190 - .229

.218 - .261

.190 - .229

.218 - .261

.020 - .125

.020 - .125

.020 - .125

.020 - .160

.020 - .160

®

®




MONADNOCK CLIP NUTS

ThreadPart #

130061130062130068

.020 - .090

.020 - .090

.140 - .230

.515

.665

.740

10-3210-3210-32

SheetThicknessA±.015 Nominal Edge

Margin.350 - .500.510 - .650.600 - .710

.095

.095

.235

.015

.015

.120

C Max.B Min. C Min. K Max. L Max.

.000

.000

.010

.338

.338

.338

.281

.281

.281

130061, 130062, 130068

ThreadPart # SheetThickness

Nom. EdgeMargin

294667

294667 6-32 .030 - .062 . 280 - .310

ThreadPart #

130007130008

.095

.075.020 - .090.020 - .070

.015

.015.520.395

8-328-32

SheetThickness

Nom. EdgeMargin

.310 - .500

.250 - .380

130007, 130008

A B C

ThreadPart #

13100000-213100000-313100000-413100000-513100000-6

.130

.163

.190

.190

.280

.220 - .230

.220 - .230

.220 - .230

.220 - .230

.220 - .230

.300

.395

.520

.665

.749

10-3210-3210-3210-3210-32

RecommendedInstallation Hole Dia.

Nominal EdgeDistance

.020 - .120

.020 - .090

.020 - .120

.020 - .120

.140 - .250

.281

.375

.500

.625

.705

Mounting SheetThickness

B±.010

A±.010

13100000-#

Thread Part #

13080000-313080000-413080000-5

.163

.190

.190

.192 - .202

.192 - .202

.192 - .202

.395

.520

.665

8-328-328-32

RecommendedInstallation Hole Dia.

B±.010

A±.010

Nominal EdgeDistance

.375

.500

.625

Mounting SheetThickness.020 - .120.020 - .120.020 - .120

13080000-#




MS21051 - ONE LUG NUTPLATE

MS21051 - Available without Dry Film LubeMS21052 - One Lug Nutplate Corrosion Resistant

MS21051

6-326-328-328-32

10-3210-321/4-28

.935

.935

.935

.935

.950

.950

.993

.297

.297

.297

.297

.328

.328

.414

.344

.344

.344

.344

.344

.344

.344

.312

.312

.312312.312.312.312

L06L06KL08

L08KL3

L3KL4

with Dry Film Lube

.171

.171

.250

.250

.250

.250

.281

A

B

J C

ThreadSize

A CMax Max Max

HeightBMax

JMax

MS21049 - TWO LUG, LOW HEIGHT 100o COUNTERSUNK

MS21049 - Available without Dry Film Lube MS21050 etalptuN thgieH woL ,guL owT - Corrosion Resistant

MS210498-328-32

10-3210-321/4-28

.948

.948

.948

.9481.260

.422

.422

.453

.453

.619

.344

.344

.344

.344

.500

.688

.688

.688

.6881.00

L08L08K

L3L3KL4

with Dry Film Lube

.272

.272

.281

.281

.340A

B

J

C

ThreadSize

A CMax Max Max

HeightBMax

JMax

MS21047 - TWO LUG, LOW HEIGHT NUTPLATE

MS21047.948.948.948.948.948.948

1.2601.292

.265

.265

.297

.297

.328

.328

.414

.505

.344

.344

.344

.344

.344

.344

.500

.500

.688

.688

.688

.688

.688

.6881.001.00

L06L06KL08

L08KL3

L3KL4L5

with Dry Film Lube

.171

.250

.250

.250

.250

.250

.281

.328

6-326-328-328-32

10-3210-321/4-28

5/16-24

A

B

J

C

ThreadSize

A CMax Max Max

HeightBMax

JMax

MS21047 - Available without Dry Film LubeMS21048 - Two Lug Nutplate Corrosion Resistant

“K” Suffix Indicates Countersunk or Dimpled Riveting Holes






A

J

C

B

MS21061 - ONE LUG, FLOATING NUTPLATE

MS21061 - Available without Dry Film LubeMS21062 - One Lug, Floating Nutplate tnatsiseR noisorroC

1.0511.0511.0511.0511.0511.0511.306

.422

.422

.422

.422

.422

.422

.531

.344

.344

.344

.344

.344

.344

.500

MS21061.203.203.250.250.250.250.281

L06L06KL08

L08KL3

L3KL4

with Dry Film Lube

6-326-328-328-32

10-3210-321/4-28

ThreadSize

A CMax Max Max

HeightBMax

MS21059 - TWO LUG, LOW HEIGHT, FLOATING NUTPLATE

MS21059 - Available without Dry Film LubeMS21060 - Two Lug, Low Height, Floating tnatsiseR noisorroC

MS210594-406-326-328-328-32

10-3210-321/4-281/4-28

5/16-243/8-24

.948

.948

.948

.948

.948

.948

.9481.2921.2921.2921.292

.416

.416

.416

.416

.416

.416

.416

.516

.516

.609

.680

.344

.344

.344

.344

.344

.344

.344

.500

.500

.500

.500

L04L06

L06KL08

L08KL3

L3KL4

L4KL5L6

.688

.688

.688

.688

.688

.688

.6881.001.001.001.00

with Dry Film Lube

.175

.203

.203

.250

.250

.250

.250

.281

.281

.328

.344

A J

C

B

ThreadSize

A C JMax Max Max Max

HeightBMax

J

AC

MS21055 - CORNER NUTPLATE

MS21055 - Available without Dry Film LubeMS21056 - Corner Nutplate Corrosion Resistant

MS21055with Dry Film Lube

L06L08

L08KL3

L3KL4

6-328-328-32

10-3210-321/4-28

.637

.637

.637

.653

.653

.852

.344

.344

.344

.344

.344

.500

.486

.486

.486

.486

.486

.707

.171

.250

.250

.250

.250

.281

ThreadSize

A C JMax Max Max Max

Height







A

J

C

MS21073 - CORNER, LOW HEIGHT MINIATURE NUTPLATE

L04L06L08L3

L3KL4L5

.448

.463

.497

.526

.526

.603

.757

4-406-328-32

10-3210-321/4-28

5/16-24

.203

.218

.234

.250

.250

.281

.359

.287

.308

.331

.354

.354

.398

.508

MS21074 - - Corner, Low Height Miniature Corrosion Resistant(NAS698C) Reference MS21073 for Sizes

MS21073.143.171.250.250.250.281.328

ThreadSize

A with Dry Film LubeC JMax Max Max Max

Height

MS21071 - ONE LUG, LOW HEIGHT MINIATURE NUTPLATE

MS21071

MS21071 - Available without Dry Film LubeMS21072 - One Lug, Low Height Miniature Corrosion Resistant

L04L06

L06KL08

L08KL3

L3KL4

.260

.265

.265

.297

.297

.328

.328

.414

.667

.684

.684

.716

.716

.745

.745

.822

4-406-326-328-328-32

10-3210-321/4-28

.203

.218

.218

.234

.234

.250

.250

.281

.143

.171

.171

.250

.250

.250

.250

.281

A

B

JC

ThreadSize

A with Dry Film LubeB CMax Max Max Max

Height

MS21069 - TWO LUG, LOW HEIGHT MINIATURE NUTPLATE“K” Suffix Indicates Countersunk or Dimpled Riveting Holes

MS21069 - Available without Dry Film LubeMS21070 - Two Lug, Low Height Miniature Corrosion Resistant

MS21069.406.437.437.468.468.500.500.562.718

L04L06

L06KL08

L08KL3

L3KL4L5

.143

.171

.171

.250

.250

.250

.250

.281

.328

4-406-326-328-328-32

10-3210-321/4-28

5/16-24

.630

.661

.661

.692

.692

.724

.724

.7861.006

.260

.265

.265

.297

.297

.328

.328

.414

.505

ThreadSize

A with Dry Film LubeB J

A

B

J

Max Max Max MaxHeight



MS21073 - Available without Dry Film Lube




MS21086

L08L3L4

.234

.250

.281

.486

.521

.591

8-3210-321/4-28

MS21086 - SIDE BY SIDEREDUCED RIVET SPACING NUT PLATE

.250

.250

.281

.297

.328

.414

.219

.219

.219

A

B J

C

A B C JThreadSize Max Max Max Max

HeightMax

MS21081

-06-08-3-4

.486

.486

.486

.707

.344

.344

.344

.500

.703

.703

.703

.906

6-328-32

10-321/4-28

MS21081 - CORNER NUTPLATEWITH NYLON INSERT

.234

.297

.312

.375

.406

.406

.406

.514

A

B

J

C

A B C JThreadSize Max Max Max Max

HeightMax

MS21080 - ONE LUG NUTPLATEWITH NYLON INSERT

MS21080

8-3210-321/4-28

1.0311.0311.062

.406

.406

.516

.344

.344

.344

.312

.312

.312

-08-3-4

.297

.312

.375

A

B

J CA B C JMax Max Max Max

ThreadSize

HeightMax

BThreadSize Max Max Max MS21078

6-328-3210-32

.984

.984

.984

.406

.406

.406

.344

.344

.344

.688

.688

.688

-06-08-3

MS21078 - TWO LUG NUTPLATEWITH NYLON INSERT

MaxA C J

.234

.297

.312

HeightA

B

JC

Max

MS21075 - Available Without Dry Film LubeMS21076 - Two Lug, Low Height Miniature Corrosion Resistant

L04NL06NL08NL3NL4NL5N

AThreadSize MS21075

B C

.651

.682

.707

.739

.8011.010

4-406-328-32

10-321/4-28

5/16-24

.203

.218

.234

.250

.281

.359

.315

.357

.367

.416

.500

.581

with Dry Film Lube

MS21075 - TWO LUG, LOW HEIGHT MINIATUREFLOATING NUTPLATE

.153

.171

.250

.250

.281

.328

.406

.437

.468

.500

.562

.718

A

B

JC

JMax Max Max Max Max

Height




NAS1870 - TWO LUG FLOATING,DEEP COUNTERBORE

B C JThreadSize Max Max Max

10-3210-3210-32

.948

.948

.948

.688

.688

.688

A

-3-2-3-3-3-4

HeightMax

NAS1870

.312

.375

.438

.250

.250

.250

.344

.344

.344

A

C

J

B

0.416

Max

NAS1474 - TWO LUG, FLOATING,CAPPED NUTPLATE, WITH REDUCED RIVET SPACING

B C JThreadSize Max Max Max Max

6-328-3210-32

1/4-28

.840

.840

.8401.000

.443

.443

.443

.635

.295

.295

.295

.376

.590

.590

.590

.752

A

A06A08A3A4

HeightMax NAS1474

.405

.405

.405

.560

–C08C3C4

NAS1474AJ

C

B

NAS1473 - TWO LUG, FLOATING,CAPPED NUTPLATE

CThreadSize Max Max

8-3210-321/4-28

5/16-24

.344

.344

.500

.500

MaxA B J NAS1473

A08A3A4A5

HeightMax

.640

.640

.755

.823

.688

.6881.0001.000

AJ

C

B

NAS1473

C08C3C4C5

.989

.9891.2961.296

.568

.568

.668

.762

Max

MS33737 - INSTRUMENT MOUNTING NUTPanel

Range

.062

.093

.125

.187

.250

.312

.375.375+

.438

.469

.500

.562

.625

.688

.750

.750

9C10C11C12C13C14C15C16C

MS33737- For Ref. OnlyNAS487-

1314151617182021

MaxA

METRIC - TWO LUG FLOATING METRIC - TWO LUG FLOATING, MINATURE

Part #

4JSF50009MLN29679AM3 M3 x 0.5

M4 x 0.7M5 x 0.8M6 x 1.0

HoleSpacing

17171922

ThreadSize

Alt Part #

5JSF50009M6JSF50009M

3JSF50009MLN29679AM4LN29679AM5LN29679AM6

M4 x 0.7M5 x 0.8M6 x 1.0

HoleSpacing

121416

ThreadSize

Part #

4JSMF50209M5JSMF50209M6JSMF50209M




NAS1791 - TWO LUG, SELF-LOCKING,FLOATING, VARIABLE COUNTERBORE NUTPLATEReplaceable Nut Element,125 KSI, 450°F & 800°FThread

Size

10-32

NAS1791

A3-1A3-2A3-3A3-4A4-1A4-2A4-3A4-4

HeightMax.640.640.755.823.640.640.755.823

NAS1791

C3-1C3-2C3-3C3-4C4-1C4-2C4-3C4-4

AMax

BMax

HMax

C+ .005

J+ .002

.948 .445 .344 .484 .688

1/4-28 1.292 .547 .500 .584 1.00

TINNERMANNUTPLATE

Tinnerman Part #A6195-6Z1DA6195-8Z1D

#6#8

Screw Size

TinnermanPart #

TINNERMAN NUT“Flat” Type

A1776-4Z1DA1777-6Z1DA1778-8Z1D

A1779-10Z1D

ScrewSize

#4#6#8

#10

NAS446-1--

NAS446-4NAS446-5

.500

.630

.625

.875

.312

.437

.437

.500

ALength

BWidthFor Ref. Only

TinnermanPart #

TINNERMAN NUT“U” Type

A1784-6Z1DA1785-6Z1DA1786-8Z1D D1274-8-1

A1789-8Z1DA1348-8Z1DA1787-8Z1DA1788-8Z1D

A1758-10Z1DA1787-10Z1DA1932-8Z1D

ScrewSize#6#6#8#8#8#8#8#8

#10#10#8

NAS395-6NAS395-7

NAS395-12NAS395-14NAS395-16NAS395-17NAS395-18

---NAS395-24

------

.610

.840

.530

.500

.610

.730

.840

.840

.620

.840

.580

.440

.440

.500

.500

.440

.500

.440

.440

.440

.440

.500

BWidth

ALengthFor Ref. Only

®

®

®

Tinnerman Part #A6196-6Z1DA6196-8Z1D

#6#8

Screw Size




NAS75 - BUSHINGS Bushings Plain, Press Fit

Length3/321/8

5/323/167/321/4

9/325/16

11/323/8

13/327/16

15/321/2

NAS75-5

----004---

-006-007-008-009-010-011-012-013-014-015---

NAS75-3

-003-004-005-006-007-008-009-010---

-012-013-014---

-016

NAS75-4

-003-004-005-006-007-008-009-010-011-012-013------

-016

Length3/321/8

5/323/167/321/49/325/16

11/323/8

13/327/16

15/321/2

Length3/321/8

5/323/167/321/4

9/325/16

11/323/8

13/327/16

15/321/2

NAS43HT NAS43HT3/8

7/161/23/4

3/321/8

10/643/161/4

3-243-283-323-484-64-84-104-124-16

0-83-83-103-123-143-163-183-203-22

1/81/8

10/643/167/321/4

9/325/16

11/32

NAS43HT - SPACERS"HT" Indicates Heat TreatedAlloy Steel CAD II Plated

LengthLength

.214 ID / .312 OD (#8 & #10 Screws & Bolts)

1/165/643/327/161/81/8

5/323/163/167/32

15/641/41/4

9/325/16

NAS43DD - SPACERS"FC" Indicates Chemical Film Finish"N" Indicates Gray Anodised Finish

Length42FC44FC48FC48N52N54FC56FC58FC64FC64N80N96FC112FC128FC

NAS43DD3-11/3223/64

3/83/8

13/327/16

15/321/21/2

17/3635/649/16

19/325/85/8

Length8FC10FC12FC16FC20FC24FC26FC28FC30FC32FC36FC40FC42FC48FC64FC

NAS43DD4-

O.D. I.D.O.D. I.D.

ODID

.188

.312

.312

.312

.312

.312

.312

.312

.312

.1315

.2140

.2140

.2140

.2140

.2140

.2140

.2140

.2140

.312

.312

.312

.312

.2140

.2140

.2140

.2140.250 .2765.250 .2765.250 .2765.250 .2765.250 .2765

.376 OD / .250 ID.314 OD / .190 ID .439 OD / .313 ID

ID OD

45 Deg Chamfer

Alloy Steel CAD II Plated

ODID

NAS43DD3-4FC5FC6FC7FC8FC8N10FC12FC12N14FC15FC16FC16N18FC20FC

22FC23FC24FC24N26FC28FC30FC32FC32N34FC35FC36FC38FC40FC40N

NAS43DD3-21/3211/16

3/43/4

13/1627/32

7/829/32

11

1-1/41-1/21-3/4

2

Length.277 OD / .250 ID (1/4” Bolts)

1/85/323/161/4

5/163/8

13/327/16

15/321/2

9/165/8

21/323/41

Length




MS35489 - GROMMETS

AN931 - Alternate #No Code (after dash #) - Synthetic RubberX (after dash #) - Silicone Rubber

MS35489- AN931- B - Hole C - Groove A - Outside F - Thickness

A

C

F

B

.188

.188

.188

.250

.250

.188

.188

.188

.188

.188

.188

.250

.250

.250

.312

.312

.312

.250

.312

.250

.312

.250

.312

.312

.250

.312

.312

.250

.375

.375

.250

.375

.438

.438

.438

.438

.438

.218

.281

.250

.250

.250

.312

.375

.375

.375

.312

.375

.375

.438

.438

.500

.500

.312

.438

.375

.312

.344

.7501.2501.250.438.438.750.750.875.6251.0001.2501.250.8121.0001.062.656.8751.250.9381.0001.0621.0621.5001.0621.1251.5001.3121.3751.6251.8121.6252.0001.7502.2502.125.3441.000.438.875.6251.000.8121.000.8751.250.9381.0621.3121.8121.7502.125.625.875.625

.188

.250

.5621.0001.000.312.312.562.562.625.438.7501.0001.000.562.750.812.500.6251.000.688.750.812.8121.250.812.8751.2501.0001.0621.2501.4381.2501.6251.3751.8751.750.250.750.312.625.438.750.562.750.6251.000.688.8121.0001.4381.3751.750.438.625.438

.125

.125

.125

.125

.125

.188

.188

.188

.188

.188

.250

.250

.250

.250

.312

.312

.312

.375

.375

.375

.438

.500

.500

.500

.500

.562

.625

.625

.688

.750

.750

.750

.875

.8751.0001.0001.500.125.500.188.188.250.250.312.312.375.375.438.500.688.7501.0001.500.250.375.250

----

2-92-16

--3-5--

3-9--

3-104-74-124-16

--5-95-125-13

--6-106-167-11

--8-13

--8-209-1310-1410-2011-1612-1712-2012-2314-2014-2616-2216-3024-28

----

A3-5A3-10A4-7A4-12A5-9A5-12A6-10A6-16A11-16A8-13B2-9

A12-23A16-22A24-28B4-7B6-10C4-7

140123

3X4

4X134

134X5678

8X9

10118141111213

14914

14X151617181920

1352122

121232427

1421503334353638394041424348505256646993




MS28775 - Packing / O'Ring MS28775 - Packing / O'Ring

212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244247258260261266267269275325326327328329330331332333334335336337338339340341343

.139

.210

.859

.921

.9841.0461.1091.1711.2341.2961.3591.4211.4841.6091.7261.8501.9802.1102.3342.3592.4842.6092.7342.8592.9843.1093.2343.3593.4843.6093.7343.8593.9844.1094.2344.6095.9846.5076.7117.9848.2048.73410.481.4251.6001.7251.8501.9752.1002.2252.3502.4752.6002.7252.8552.9753.1003.2253.3503.4753.725

Inside Dia. MS28775-ThicknessInside Dia. MS28775-Thickness004005006007008009010011012013014015016017018019020021022023024025026027028029110111112113114115116117118119120121122123124125126127128129130131132133134135136137138140141142143144145146147148155202210211

.070

.102

.113

.145

.176

.208

.239

.301

.364

.426

.489

.551

.614

.676

.739

.801

.864

.932

.9891.0511.1141.1761.2391.3011.3641.489.362.424.487.549.612.674.737.799.862.924.9871.0491.1121.1741.2371.2991.3621.4241.4871.5491.5491.6741.7371.7991.8621.9251.9872.0502.1122.1752.3002.3622.4252.4872.5502.6122.6752.7373.987.234.734.796

.103

.070

.139




TubingO.D.

InsideDia.Thickness MS28778

1/8

3/16 1/4

5/16

3/8 1/2 5/8

3/4 7/8

11-1/4

.239

.301

.351

.414

.468

.644

.755

.9241.047

1.1711.475

-2

-3-4

-5

-6-8-10

-12-14

-16-20

.064

.072

.078

.087

.097

.116

.118

MS28778 - Packing / O’Ring

Material - Nitrile 90

3/16

1/4

5/16

3/8

1/2

.2960

.3430

.4060

.4680

.6400

-3

-4

-5

-6

-8

.094

MS28777

Back Up WasherMaterial - Leather

TubingO.D.

InsideDia.Thickness MS28777

I.D. MS28774-004-006-007-008-010-011-012-013-014-015-016-018-019-022-026-110-111-112-113-114-116-117-127-128-133-136-210-211-212-213-214-215-216-217-221-222-223-224-226-227-228-230-326-327-328-329-330-331-332

.100

.148

.171

.202

.265

.327

.390

.455

.518

.580

.643

.768

.8301.0231.273.398.452.515.577.648.765.832

1.4591.5221.834

2.022.766.828.891.953

1.0161.0781.1411.2031.4591.5221.6471.7722.0222.1472.2722.5221.6381.7631.8882.0132.1382.2682.393

.182

.184

.052

.054

Width

.045.052

.118

.120

.065

.075

.085

.087

MS28774Back Up RetainerMaterial - Teflon

Thickness

Rod O.D. Scraper O.D. ThicknessPart #

MS28776

Scraper Piston RodMaterial - Metal

.094

.094

.094

2.282

2.407

2.532

2

2-1/8

2-1/4

MS28776M2-21

MS28776M2-22

MS28776M2-23

Cross-section of MS28776

MS28773Back Up RetainerMaterial - Teflon

1/45/163/81/25/83/41

Nom. Tube O.D.Width.117.117.121.125.131.169.169

MS28773 Thickness.061.061.061.061.073.073.073

-04-05-06-08-10-12-16




Thickness MS29512Tubing O.D.

MS29513 - Packing / O'RingMS29513

.070

.103

-005-006-007-008-009-010-011-012-013-014-015-016-017-018-019-020-021-022-023-024-025-026-027-029-031-034-110-111-112-113-114-115-116-117-118-119-120-121-122-123-126-127

Thickness Inside Dia.

Thickness and Inside Diameter Dimensions Deviate ± .003 to ± .005Larger O'Ring Dimensions Deviate ± .01 on I.D.

1.5491.6121.6741.7371.7991.8621.9251.9872.0502.1122.737

.734

.859

.921

.9841.0461.1091.1711.2341.2961.3591.4841.6091.7341.8591.9842.1092.4842.6092.7342.8592.9843.1093.2343.3593.4843.7343.8594.1091.7253.100

.103

.139

-129-130-131-132-133-134-135-136-137-138-148-210-212-213-214-215-216-217-218-219-220-222-223-224-225-226-227-230-231-232-233-234-235-236-237-238-240-241-243-327-338

Inside Dia.

.210

MS29512 - Packing / O’Ring

.101

.114

.145

.176

.208

.239

.301

.364

.426

.489

.551

.614

.676

.739

.801

.864

.926

.9861.0511.1141.1761.2391.3011.4891.7392.114.362.424.487.549.612.674.737.799.862.924.987

1.0491.1121.1741.3621.424

Thickness MS29513

Thickness.064.064.072.072.078.082.087

MS295121/8

3/161/4

5/163/8

7/161/2

-02-03-04-05-06-07-08

Tubing O.D..097.097.116.116.116.118

9/165/83/47/81

1-1/4

-09-10-12-14-16-20




MS9385 - Packings / O'RingsMS9385

-03-04-05-06-07-08-09-12

Thickness and Inside Diameter Dimensions Deviate ±.003 to ±.005Larger O'Ring Dimensions Deviate ±.01 on I.D.

MS29561 - Packing / O'Rings

Inside Dia. MS29561Thick-008-010-011-012-013-014-015-017-020-021-022-024-025-026-110-111-112-113-114-115-116-119-121-135-138-210-212-213-214-215-218-219-230-232-234-235-236-237-238-239-244-248

.176

.239

.301

.364

.426

.489

.551

.676

.864

.926

.9891.1141.1761.239.362.424.487.549.612.674.737.9241.0491.9252.112.734.859.859.9841.0461.2341.2962.4842.7342.9843.1093.2343.3593.4843.6094.7344.234

.139

.070

.103

M25988/1 - Packings / O'Rings

M25988/1-010-011-012-015-016-017-022-026-037-111-115-134-138-142-152-153-212-235-271-382-902-903-904-906-908-912-916-928

M25988/2-032M25988/2-904M25988/3-009M25988/3-013M25988/3-014M25988/4-010M25988/4-904



-010-011-012-013-014-015-016-018-020-024-110-111-112-117-130-135

M83461/1-136-141-210-212-215-216-218-222-224-226-227-236-326-328-330

M83461/1

M83248/1 M83248/1


-002-003-004-006-007-008-009-010-011-012-013-014-015-016-017-018-019-020-021-022-023-024-025-026-027-028-029-030-031-032-033-034-035-036-037-038-039-040-041-043-110-111-112-113-114-115-116-117-118-119-120-121-122-123-125-126-127-128-129-130-131-133-134-135-136-137-138-139

-140-141-142-143-144-145-146-151-152-153-154-157-158-159-162-208-210-212-213-214-215-216-217-218-219-220-222-224-226-227-228-230-231-232-234-235-236-237-238-239-240-241-242-243-244-246-247-248-249-251-254-258-259-264-266-277-278-902-903-904-905-906-907-908-910-912-916-920




S9412 - Packings / O'Rings

S9412-136-139-212-552-553-554-555-556-558

S9412-010-011-012-013-014-015-021-028-032

AS3208 - Packings / O'Rings

AS3208-06-08-10

AS3208-03-04-05

AS3582-012-013-014-116-119


AS3578-010-016-017-034-035-038-251-268-903-904-905-906-908

AS3578 - Packings / O'Rings(Supersedes MS9021)


AS3209-008-009-010-011-012-013-014-015-016-017-018-019-020-022-024-025-028-029

-030-038-040-043-113-114-115-116-120-122-126-139-140-143-145-146-214-224

AS3209


-007-008-010-011-012-013-014-015-016-017-018-019-020-022

-023-024-028-031-041-111-113-116-119-122-123-124-126-158

AS3085 AS3085

AS3084 - Packings / O’Rings

-03-04-05-06-08-12

AS3084

NAS1523Packing with Retainer"C" after Base Part # indicates

Corrosion Resistant Retainer"-" after Base Part # indicates Steel Retainer"R" after Dash # indicates Fluorinated Silicone

Materials Per MIL-R-25988"Y" after Dash # indicates Buna -N Material Per

MIL-R-7362 Type I"AA” after Base Part # indicates Aluminium Alloy

-08Y-3R-3YAA3RC3RC3Y-4R-4YAA4RC4NC4RC4Y-5YC5R.301.5935/16

NAS1523.375

Screw Size O.D.#8

I.D..156

.190

.240

.438

.500

#10

1/4

NAS1611Pre FormedO'Ring Packing

NAS1611-009

-009A-010

-010A-012

-012A-014A-015

-017A-018A-020A-024A-026A-028A-110

-110A-111-112-114-116-117-120

-132A-214A-216A-218-220-223

-228A-260A

NAS1611

NAS1612 - Packings / O’RingsNAS1612I.D.

-2A-3A-4A-5A-6A-8A-10A-12A

.239

.301

.351

.414

.468

.644

.755

.924

1/83/161/45/163/81/25/83/4

O.D.

NAS617 - Packings / O’RingsNAS617

1/83/161/45/163/81/25/83/41

1-1/4

-2-3-4-5-6-8-10-12-16-20

Thickness Tubing O.D..064.064.072.072.078.087.097.116.116.118




DrawingNumber

TemperatureRange, oF Description

Compound

NumberAN6227B

AN6230B

NAS1593

MS9020

MS9021

MS9068

MS9385

MS9386

MS9388

MS28775

MS28778

MS29512

MS29513

MS29561

M25988/1

M25988/3

M25988/4

M83248/1

M83248/2

NAS617

NAS1611

NAS1612

S9412

S9413

AMS 7271

AMS 7271

AMS 3304

AMS 7267

AMS 7267

AMS 7278

MIL-P-25732

MIL-P-5510

MIL-P-5315

MIL-P-5315

MIL-R-7362

N/A

N/A

-65 to 275

-65 to 275

-20 to 400

-65 to 225

-65 to 225

-80 to 450

-80 to 500 in air

-80 to 500 in air

-20 to 400

-65 to 275

-65 to 212

-65 to 200

-65 to 200

-65 to 257

-80 to 350

-80 to 350

-80 to 350

-20 to 400

-20 to 400

-65 to 257

-65 to 300

-65 to 300

N/A

N/A

NAS1613Class 1

NAS1613Class 2

MIL-R-83248Class 1

MIL-R-83248Class 2

MIL-R-25988Class 1, Grade 80

MIL-R-7362Type 1



MIL-P-5516Class B

MIL-P-5516Class B

MIL-R-25897Type 1, Class 1

PACKING, O'Rings for use in hydraulic systems and shock absorbers using

and aerospace applications

gaskets with hydrocarbon fuels.

PACKING PREFORMED - AMS 7271, O'Rings - Fuel and low temperature resistant.

PACKING PREFORMED - AMS 3304, O'Ring - For air and gases. Static seals only.

GASKET - STRAIGHT THREAD TUBE FITTING, BOSS - Silicone rubber.

RINGS, SEALING, SILICONE RUBBER - Heat Resistant. Low Compression Set.

RINGS, SEALING - High Temperature Fluid Resistant, Fluorocarbon Type.

PREFORMED PACKING O'Rings for hydraulic systems

PREFORMED PACKING STRAIGHT THREAD TUBE FITTING BOSS. O'Ringfor + 160 o

PREFORMED PACKING, HYDROCARBON FUEL RESISTANT, TUBE FITTING,O'Rings of the sizes shown in MS29512 and one grade only.

PREFORMED PACKING, HYDROCARBON FUEL RESISTANT, O'Ring of the sizesshown on MS29513 and one grade only.PREFORMED PACKING, SYNTHETIC LUBRICANT RESISTANT O'Ring for

FLUOROSILICONE O'Rings - Oil and Fuel Resistant



FLUOROCARBON O'Rings - High Temperature, Fluid and Compression Set Resistant.

FLUOROCARBON O'Rings - High Temperature, Fluid and Compression Set Resistant

PREFORMED PACKING, STRAIGHT THREAD TUBE FITTING BOSS O'Ring

PREFORMED PACKING, O'Ring, PHOSPHATE ESTER RESISTANT. Dash numberscorrespond to AS568A Universal Series.

PACKING PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS,PHOSPHATE ESTER RESISTANT. Dash numbers correspond to MS28778

GARRETT PART NUMBERS: For O'Rings used in fuel systems. Blue in color.

GARRETT PART NUMBER: For O'Rings used in the propeller section of the engine.Blue in color.

Packings / O'RingsGovernment and Military Specifications




O'RING KIT #110 pcs. of each





ASSORTED O'RING KIT #110 pcs. of each

ASSORTED O'RING KIT #210 pcs. of each

ASSORTED O'RING KIT #3This kit contains all parts from:

ASSORTED O'RING KIT #4This kit contains all parts from:

MS28775-006 THRU MS28775-015

MS28775-110 THRU MS28775-116

MS28775-210 THRU MS28775-235

MS28775-238, MS28775-260

MS28775-327 THRU MS28775-330

MS28778-2

MS28778-3

MS28778-4

MS28778-5

MS28778-6

MS28778-8

MS29512-04

MS29512-05

MS29512-06

MS29512-08

MS29512-10

MS29512-12

MS29513-010

MS29513-011

MS29513-012

MS29513-017

MS29513-020

MS29513-111

MS29513-137

MS29513-138

MS29513-232

MS29513-238

MS29513-338

M83248/1-010

M83248/1-011

M83248/1-012

M83248/1-013

M83248/1-014

M83248/1-024

M83248/1-113

M83248/1-114

M83248/1-115

M83248/1-214

M83248/1-904

M83248/1-905

M83248/1-906

M83248/1-908

MS28778-2MS28778-3MS28778-4MS28778-5MS28778-6MS28778-7MS28778-8MS28778-10MS28778-12

MS28775-006MS28775-007MS28775-008MS28775-009MS28775-010MS28775-011MS28775-012MS28775-013MS28775-014MS28775-015

MS29512-02

MS29512-04

MS29512-05

MS29512-06

MS29512-08

MS29512-10

MS29512-12

MS29513-010

MS29513-011

MS29513-214

MS29513-232

MS29513-238

MS29513-338


MS29513-010MS29513-011MS29513-214MS29513-232MS29513-338

MS28778-2MS28778-3MS28778-4MS28778-5MS28778-6MS28778-7MS28778-8MS28778-10MS28778-12MS29512-02MS29512-04MS29512-05MS29512-06MS29512-08MS29512-10MS29512-12

M83248/1-010M83248/1-011M83248/1-012M83248/1-013M83248/1-014M83248/1-015M83248/1-016M83248/1-017M83248/1-018M83248/1-113M83248/1-904M83248/1-905M83248/1-906M83248/1-908

O'Ring Kit #1

O'Ring Kit #2

O'Ring Kit #3

O'Ring Kit #1

O'Ring Kit #2O'Ring Kit #3O'Ring Kit #4


AS3084-03AS3084-04AS3084-05AS3085-014AS3085-015

AS3085-016

AS3085-017AS3085-018

AS3085-028AS3085-041AS3085-113AS3208-04AS3209-009

AS3578-251

AS3582-012AS3582-013




FUSESGlass Enclosed

FUSE HOLDERS

Standard, Single Element, Glass tube, Fast-acting to protect sensitive instruments andradio.

AGC SERIES MDL SERIES

SEALED BEAM LAMPSLanding and Taxi Lighting

HKPStandard for 1/4" x 1-1/4" Fuses

431345094522455145524553455745594570

45804581458745914594459545964626

AGC-1/8AGC-1/4AGC-1/2AGC-3/4

AGC-1AGC-1-1/2

AGC-2AGC-3AGC-4

Part # Amps1/81/41/23/4

11-1/2

234

5

10

15

20

30

AGC-5AGC-7

AGC-7-1/2AGC-10AGC-15AGC-20AGC-25AGC-30AGC-35

57

7-1/2101520253035

Part # Amps Amps

Sealed Beam Lamps

HRJIn-Line Fuseholderfor SFE and 1/4" xvarious length fuses(Includes SFE-20 Fuse)

Slow Blow, Dual Element. Fuse link operates onvery high overloads to avoid needless blows.Thermal cutout functions on low overload.

Lamp #17771940

1495X1939X68386839

A4174-24M6363/2-2

MINIATURE & SUBMINIATURE BULBSPanel, Warning and Tail Lighting

Amps

)sehcni 4/1-1 x 4/1()sehcni 4/1-1 x 4/1(

Slow Blow TypePart #

Slow Blow TypePart #

MDL-1/2

MDL-1

MDL-2

MDL-3

MDL-4

MDL-5

MDL-10

MDL-15

MDL-20

MDL-30

1/2

1

2

3

4

FUSES & FUSE HOLDERS

LIGHTING - LAMPS & BULBS

Q4509Q4554Q4559

Q4559XQ4591Q4566Q4681Q4631

Quartz Lamps303304

305

307308

313

327

328330

334

356387

1495

1683




MS27488CONNECTORSEALING PLUGS

Part # Contact Size Color Code

22

20

16

12

8

Black

Red

Blue

Yellow

MS27488-22-1

MS27488-20-1

MS27488-16-1

MS27488-12-1

MS27488-8-1 Red

M39029CONNECTOR CONTACTSPart # Fits Series

PIN

SOCKET

PIN

SOCKET

SOCKET

SOCKET

PIN

MIL-T-81714TERMINALJUNCTION

MIL-C-26482 SER IIMIL-C-81703 SER III

MIL-C-83723 SER I & III



MIL-C-81659SERIES II R

MIL-C-81569SERIES II

INACTIVE NEW DESIGN

MIL-T-81714TERMINAL

JUNCTION SYSTEM

MIL-T-5015 SERIESMS3450

MIL-C-83723 SER II

MIL-T-5015 SERIESMS3450

MIL-C-83733 SER II

Part # Fits Series

M39029/31-229

M39029/31-240

M39029/31-241

M39029/32-248

M39029/32-259

M39029/32-260

M39029/56-348

M39029/56-351

M39029/56-352

M39029/56-353

M39029/57-354

M39029/57-357

M39029/57-358

M39029/57-359

M39029/58-360M39029/58-363

M39029/58-364

M39029/58-365

M39029/63-368

M39029/75-416

M39029/75-417

M39029/75-422

M39029/76-424

PIN

PIN

SOCKET

SOCKET

SOCKET(SHIELDED)

SOCKET(SHIELDED)

PIN(SHIELDED)

1620

20

16

20

20

22

20

16

1222

2016

12

22

20

16

12

20

12

12

12

16

MIL-C-26482 SER IMIL-C-26500MIL-C-26518

MIL-C-38999SERIES

I,III, & IV

MIL-C-38999SERIES

I,III, & IV

MIL-C-38999 SERIESI, II, III, & IV

MIL-C-38999SERIES

I,III, & IV

MIL-C-24308MIL-C-38999 SER I-IV

MIL-C-55302/69MIL-C-83733

MIL-C-24308MIL-C-38999 SER II

MIL-C-83733

PIN

M39029/4-113

M39029/1-100

M39029/1-101M39029/1-102

M39029/1-103M39029/4-110

M39029/4-111

M39029/5-115M39029/5-116

M39029/5-117

M39029/5-118

M39029/5-119

SOCKET

MIL-C-83723 SER IIIMIL-C-83733



16

1614

12

20

1612

2016

161212

M39029/10-141

M39029/10-142

22

20

22

20

2220

16

16

12

16

1612

M39029/11-144M39029/11-145

M39029/12-148

M39029/12-149

M39029/22-191

M39029/22-192

M39029/22-193

M39029/29-212

M39029/29-213

M39029/30-217

M39029/30-218M39029/30-219

20

20

M81969INSERTION/EXTRACTIONTOOL

M81969/1-01M81969/1-02M81969/1-03M81969/1-04

M81969/14-01M81969/14-02M81969/14-03M81969/14-04

222016

22D22201612

Green/WhiteRed/WhiteBlue/White

Green/WhiteGreen/WhiteRed/WhiteBlue/White

Yellow/White

Part # Contact Size Color Code

M81969/14-10M81969/14-11

20 Red/Orange20 Red/White




M81714/12-#D

A Dia.Max

BodyB Dia.Max

LMax

M81714/12-22DM81714/12-20DM81714/12-16DM81714/12-12D

M39029/1-100M39029/1-101M39029/1-102M39029/1-103

M 81969/14-02M 81969/14-02M 81969/14-03M 81969/14-04

.400

.400

.500

.620

.275

.275

.300

.370

1.5521.5521.9221.922

C+ .01

Type

1 or 21 or 21 or 21 or 2

.13

.13

.18

.25

Terminal junction blocks, Sectional,Wire in-line junctions, Double, Series I

Type 1 Type 2

B B

Bussing Indicators

A

L

A

B

Part Number ExampleDash Number

Military Part # Indicator NumberSpecification Sheet Number

Component SizeClass

M 81714/12 - ** D - *Type Designator

Part # Contact

Part #Installation/

Removal Tool

Terminal junction blocks, Sectional,Wire in-line junctions, Single, Series I

M81714/11-#D

ContactPart #

Installation/Removal Tool Part # A Dia.

+ .025

BodyB Dia.Max

LMax

M81714/11-22DM81714/11-20DM81714/11-16DM81714/11-12D

M39029/1-100M39029/1-101M39029/1-102M39029/1-103

M81969/14-0 2M81969/14-0 2M81969/14-0 3M81969/14-0 4

.250

.250

.281

.344

.225

.225

.256

.319

1.5521.5521.9221.922

A B

L

Part Number ExampleDash Number

Military Part # Indicator NumberSpecification Sheet Number

SizeClass

M 81714/ 11 - ** D

M24308/26Female screwlock assembly for miniature,rectangular, electric, rack and panelM24308/26-1F - Contains 2 jack screws, 4 flat washers, 2 lockwashers, and 2 nuts (see image below)M24308/26-1Z - Contains 1 screw, 2 flat washers,

1 lockwasher and 1 nut

M24308/25Male screwlock assembly. Electric, miniature,rectangular, polarized shell, rack and panel

Suffix A=P ure electrodeposited aluminiumF=Cadmium finishK =Zinc nickel

P=Passivated stainless steelT=Nickel fluorocarbon polymerNone=Zinc




MS25083Bonding Jumpers

MS25083- MS25083- MS25083- MS25083-1BB71BB82AA32AA42AA52AA62AA72AA82AB32AB42AB5

2AB62AB72AB82BB22BB32BB42BB52BB62BB72BB82BB10

2BC42BC52BC62BC72BC82BC95BB45BB55BB65BB7

5BB85BB95BB105BB125BB156DD56DE7

7AB107BB67BB8

SPIRAL WRAPPer MIL-P-20693 Type IOperating Temp - 85 0 C to 93 0 C

SPN Diameter

1/2234

1/169/323/81/2

.015

.025

.035

.035

WallThickness

Nom.O. D.

.125

.250

.375

.500

PitchSPBOld # Old #New # New #

SPN - Natural/Nylon SPB - Black/U/V Resistan Polyethylene SPT - Teflon - Call for Pricing

SW40SW41SW42SW43

SPB-1/8SPB-1/4SPB-3/8SPB-1/2

SW20SW21SW22SW23

SPN-1/8SPN-1/4SPN-3/8SPN-1/2

D142Solder Sleeves

Part #D142-50D142-51D142-52

F Dim.E Dim..055.100.160

.125

.200

.300

D436Mini-SealCrimp Splices

Part #20-2616-2012-18

AWG SizeD436-36D436-37D436-38

TERMINAL END SPLICEClosed End Wire Cap,PIDG Series,Tin Plated Copper,Nylon Insulated

Part #324484324485324486

Color CodeAWG Size26-1622-1616-14

ClearRedBlue

Conductors

M27500TEFZEL CABLEShielded & Jacketed, MIL-W-22759

M27500-16TG1T1418TG1T1420TG1T1420TG2T1422TG1T1422TG2T1422TG3T14

1112123

AWG Size16182020222222

AIRCRAFT WIREPer MIL-W-22759/16(-9 suffix indicates white) ( -0 suffix indicates black)

Part # AWG SizeM22759 / 16-22-9M22759 / 16-20-9M22759 / 16-18-9M22759 / 16-16-9M22759 / 16-14-9

2220181614

Part # AWG SizeM22759 / 16-12-9

M22759 / 16-10-9M22759 / 16-8-9

M22759 / 16-6-9

12

108

6

MS Part #M81824/1-1M81824/1-2M81824/1-3




Nylon 6/6 WeatherResistant Cable TiesRecommended for outdoor use

Part # Body Width LengthTY5244MXTY526MX

TY5272MX

.140

.140

.270

14.5011.108.75

Tensile Strength30 lb.30 lb.50 lb.

TY-Rap® MountingHead Cable Ties TY533MX TY534MX TY535MX

Part # Body Width Mounting HoleTY533MXTY534MXTY535MX

.091

.140

.184

4.006.007.80

#4#8

#10

Tensile Strength184050

Length

TY-Rap®

IdentificationCable Ties

TY551M TY553M

Part # Max Dia. Length.625.6251.75

TY551MTY553MTY546M

3.604.007.25

Marking Pad Size1 x .313

.813 x .3595 x .875

Tensile Strength18 lb.18 lb.50 lb.

TY546M

MS3367Tie Wraps / Thomas & BettsUse T&B Part # for Metal ClipFor Clear use (-9), For Black use (-0)

WidthMS3367 Max Dia. Length(inches)

TensileStrength

50 lb.50 lb.

120 lb.18 lb.30 lb.

120 lb.50 lb.

.190

.192

.310 .100

.146

.310

.192

714

13-1/83-1/25-1/4

3011-3/8

1-3/44

3-1/25/8

1-1/483

-1-9-2-9-3-9-4-9-5-9-6-9-7-9

MS3367

-1-0-2-0-3-0-4-0-5-0-6-0-7-0

T & BPart #

T & BPart #

TY25MTY28MTY27MTY23MTY24MTY29M

TY253M

TY25MXTY28MXTY27MXTY23MXTY24MXTY29MX

TY253MX

MS25171-1S2S3S4S

MS25171-#SNipple, Electrical

MS25274Wire Cap

ColorMS25274 AWB Size328307328308

328309

Amp Part #

REDBLUE

YELLOW

-2-3

-4

22-1816-14

12-10

Length1.382.502.502.50

®




MS3320Circuit BreakerSeries 2TC2

Miniature,Trip Free

MS Part #Klixon Part #2TC2-12TC2-22TC2-32TC2-52TC2-7.52TC2-10

2TC2-152TC2-20

MS3320-1MS3320-2MS3320-3MS3320-5

MS3320-7.5MS3320-10MS3320-15MS3320-20

KlixonCircuit BreakersSeries 7274

Low AmperageHigh Performance

MS Part #Klixon Part #7274-2-17274-2-2

7274-2-37274-2-4

7274-2-57274-2-7.57274-2-107274-2-15

MS26574-1MS26574-2

MS26574-3MS26574-4

MS26574-5MS26574-7.5MS26574-10MS26574-15

MS Part #Klixon Part #7274-11-17274-11-1.57274-11-27274-11-2.57274-11-37274-11-47274-11-57274-11-7.57274-11-107274-11-15

MS22073-1MS22073-1.5MS22073-2MS22073-2.5MS22073-3MS22073-4MS22073-5MS22073-7.5MS22073-10 -----

KlixonCircuit BreakersSeries 7277-2

Low amperagegeneral application

Part #

7277-2-1/27277-2-1

7277-2-2

7277-2-2-1/27277-2-3

7277-2-4

Rating (A)

1/212

2.5

3

4

5

7.5

10

15

20

Part #

7277-2-5

7277-2-7-1/2

7277-2-10

7277-2-15

7277-2-20

Rating (A)

Potter & BrumfieldCircuit BreakersSeries W31

Combination single poleswitch and circuit breaker

Part #

W31-X2M1G-2

W31-X2M1G-5

W31-X2M1G-7.5

W31-X2M1G-10

W31-X2M1G-15

W31-X2M1G-20

Rating (A)

2

5

7.5

10

15

20

W31-X2M1G-25

W31-X2M1G-30

W31-X2M1G-35

W31-X2M1G-40

W31-X2M1G-50

25

30

35

40

50

Part # Rating (A)

Potter & BrumfieldCircuit BreakersSeries W58Single pole with recessed resetbutton. Red band around resetbutton for visible trip indication.

Part # Rating (A)

1

2

3

4

5

7

W58-XC4C12A-8

W58-XC4C12A-10

W58-XC4C12A-15

W58-XC4C12A-20

W58-XC4C12A-25

W58-XC4C12A-30

Part # Rating (A)

8

10

15

20

25

30

W58-XC4C12A-1

W58-XC4C12A-2

W58-XC4C12A-3

W58-XC4C12A-4

W58-XC4C12A-5

W58-XC4C12A-7

Potter & BrumfieldCircuit BreakersSeries W23Single Pole with white bandaround body of reset button thatis visible if breaker trips.

Part #

W23-X1A1G-.5

W23-X1A1G-1W23-X1A1G-2W23-X1A1G-3

W23-X1A1G-5W23-X1A1G-7.5

W23-X1A1G-10

Rating (A)

1/2

123

57.5

10

W23-X1A1G-15

W23-X1A1G-20W23-X1A1G-25W23-X1A1G-30

W23-X1A1G-35W23-X1A1G-40

W23-X1A1G-50

Part # Rating (A)

15

202530

3540

50

(7274-2 Style) (7274-11 Style)

®

®

®

® ®




HEAT SHRINK TUBINGPer MIL-I-23053/5 (Sold in 4 Ft. Sections)Add "-0" to indicate BlackAdd "-9" to indicate WhiteAdd "-C" to indicate Clear

M23053/5-102-( )M23053/5-103-( )M23053/5-104-( )M23053/5-105-( )M23053/5-106-( )M23053/5-107-( )M23053/5-108-( )M23053/5-109-( )M23053/5-110-( )

M23053/5-202-( )M23053/5-203-( )M23053/5-204-( )M23053/5-205-( )M23053/5-206-( )M23053/5-207-( )M23053/5-208-( )M23053/5-209-( )M23053/5-210-( )

1/163/321/83/161/43/81/23/41

.0625

.0938.125.1875.25

.375.5.751

.031

.046

.062

.093

.125

.187.25.375.5

Part #For Black & White

Part #For Clear Diameter Before Shrink After Shrink

Inner Diameter

MS21266Grommet Edging (1 Ft. Lengths)

-1N-2N-3N-4N

.015-.052

.052-.085

.085-.128

.128-.192

.150

.175

.220

.325

.056

.090

.131

.195

MS21266 SheetThickness

AWidth

BWidth

MS25041Indicator LightPress to Test

MS25041With Dimmer

MS25041Without Dimmer Lens Color

ColorlessRed

GreenYellow

Blue

-5-6-7-8

-11

-1-2-3-4

-10

MS25223 & MS25224Switch Guard

Part # Type Mounting Panel Thickness1 Hole1 Hole3 Hole1 Hole

.050-.248

.050-.248

.050-.081

.050-.248

MS25223-2MS25224-1MS25224-2MS25224-3

MS25223 MS25224

2 Position, 1 Pole

-22-29-30-23

MS24523MS24524Toggle SwitchEnvironmentally SealedMaintained and Momentary Toggle Action

2 Position, 2 Poles 3 Position, 2 Poles

MS24523 MS24524 MS24524KeywayPosition

OppositeKeyway

KeywayPosition

OppositeKeyway

KeywayPosition

OppositeKeyway

CentrePosition

OFFOFF*1-2*1-2

-22-30-23-26

-21

-31

-27

2-32-3OFF2-3

OFF

OFF

OFF

OFF1-2, 4-5*1-2, 4-51-2, 4-5*

2-3, 5-6OFF

2-3, 5-62-3, 5-6

1-2, 4-5

1-2, 4-5*

1-2, 4-5*

2-3, 5-6

2-3, 5-6

2-3, 5-6*These positions only are momentary. All other positions are maintained.MS35058 (One Pole) and MS35059 (Two Pole) are inactive for new design.




THOMAS & BETTS STA-KON® TERMINALS

Non-Insulated Ring F71

F4-14F71

1/4"

1/4"

Part # AWG Range Bolt Hole

4-3

F4-14

Nylon Insulated Ring

RD8-10RD8-38RF4-10RF4-14RF4-516RF4-38RG2-10RG2-14RG2-38

9-8-7

4-3

2-1

#103/8"#101/4"5/16"3/8"#101/4"3/8"


2RA182RB142RC10

22-1816-1412-10

Part # AWG Range

Sta-Kon® NylonInsulated Splices -Butt Type - InsulationSupport

Ty-Rap® Two DirectionMounting Base

Part # Alternate ScrewSize

MaxWidth Length

TC5828 TC828-T13 #8 .390 .875

2RAA2RBB2RCC

22-1816-1412-10

Part # AWG Range

Sta-Kon® NylonInsulated Splices -Aircraft System Splices

Vinyl Insulated Ring -Insulation Support

18RA-614RB-614RB-8

10RC-10

22-16

18-14

12-10

#6#6#8

#10

Part # AWGRange

BoltHole

RA857RB857RB867RC367

Alternate

Sta-Kon® WristlockDisconnect

RA18D RB14D

RA18DRB14D

22-1816-14

Part # AWG Range

Sta-Kon® NylonInsulated Ring -Insulation Grip

RZ22-4RZ22-6RZ22-8RZ22-10RA18-4RA18-6RA18-8RA18-10RA18-14RB14-4RB14-6RB14-8RB14-10RB14-14RC10-6RC10-8RC10-10RC10-14

26-22#4#6#8#10#4#6#8#101/4#4#6#8#101/4#6#8#101/4


22-16

18-14

12-10




M83519

M83519/1 (No wire) M83519/2 (With wire)

Part #M83519/1-1M83519/1-2M83519/1-3M83519/1-4M83519/1-5

M83519/2-2M83519/2-3M83519/2-4M83519/2-5M83519/2-6M83519/2-7M83519/2-8

A + .07 B Min. C Min. D Min. Part #.650.650.650.750.750

0.0750.1050.1700.2350.275

0.1050.1450.2000.2550.300

0.3250.3250.3250.3250.325

.650

.650

.750

.750

.650

.650

.650

0.1050.1700.2350.2750.0750.1050.170

0.1450.2000.2550.3000.1050.1450.200

0.3250.3250.3250.3250.3250.3250.325

Terminal ShieldSolder StyleInsulated Heat Shrinkable

A + .07 B Min. C Min. D Min.

TypeM7928/5-2M7928/5-3M7928/5-4M7928/5-5

------

3239753205593205623205703244632448

24 - 20 AWG22 - 18 AWG16 - 14 AWG12 - 10 AWG22 - 18 AWG16 - 14 AWG

PIDG / TRANS.PIDG / RED

PIDG / BLUEPIDG / YELLOW

PIDG / REDPIDG / BLUE

Butt SpliceButt SpliceButt SpliceButt SpliceKnife SpliceKnife Splice

M7928/5Butt Splice, Knife Splice

MIL Part # AMP Part # Style / ColorWire Size

M7928/5-Butt Splice

Knife Splice

MS25036Ring Terminal, Insulated

MS25036- AMP Part # Terminal Size Style/ColorStud Size148101102149103150104105152106153108154110156112157113115116117118120121123124125

32055336149518633205513615332057132057232057332415932056151864-151864-232056332056432056836161320569320576322128322049322003322004322051324048322053324051322011

#4#6#6#8#101/45/163/8#4#6#8#101/43/8#8#101/45/16#101/45/163/81/45/161/45/163/8

22 - 18 AWG22 - 18 AWG22 - 18 AWG22 - 18 AWG22 - 18 AWG22 - 18 AWG22 - 18 AWG22 - 18 AWG16 - 14 AWG16 - 14 AWG16 - 14 AWG16 - 14 AWG16 - 14 AWG16 - 14 AWG12 - 10 AWG12 - 10 AWG12 - 10 AWG12 - 10 AWG

8 AWG8 AWG8 AWG8 AWG6 AWG6 AWG4 AWG4 AWG4 AWG

PIDG / REDPIDG / REDPIDG / REDPIDG / REDPIDG / REDPIDG / REDPIDG / REDPIDG / RED

PIDG / BLUEPIDG / BLUEPIDG / BLUEPIDG / BLUEPIDG / BLUEPIDG / BLUE

PIDG / YELLOWPIDG / YELLOWPIDG / YELLOWPIDG / YELLOW

AMPLI-BOND / REDAMPLI-BOND / REDAMPLI-BOND / REDAMPLI-BOND / RED

AMPLI-BOND / BLUEAMPLI-BOND / BLUE

AMPLI-BOND / YELLOWAMPLI-BOND / YELLOWAMPLI-BOND / YELLOW




A1B1

A3B3

MS3373 Used on MS27212

-1

-2

-3

NUT

LOCKWASHER

FLATWASHER

TYPICAL INSTALLATION

INSULATIONSTRIP

TERMINALBOARD

INSULATINGSTRIP

.090 + .000- .006

TYPE C

TYPE A

TYPE B

MS3373Insulating Mountingfor MS27212 terminal board

MS18029-21MS18029-22MS18029-23

MS18029-##KnobNOTE: Knob assembly comes with the retaining ring

Knob Assembly Internal Thread.138-32

.1900-32

.2500-28

MS18029-1S(N)MS18029-2S(N)MS18029-3S(N)

MS18029-#S#Plastic Laminate Cover Assembly (Type S)for MS27212 terminal board,Available with or without Knobs(N) indicates number of studs

Assembly P/NWith Knobs Stud Size

.138-32

.1900-32

.2500-28

MS18029-11S(N)MS18029-12S(N)MS18029-13S(N)

Assembly P/NWithout Knobs

MS25226-2-(N)MS25226-4-(N)MS25226-6-(N)

MS25226Terminal Connecting LinkBus Bar, Copper, Cadmium Plated

Part # Stud SizeNo. 6

No. 101/4

(N) indicates the number of stud holes required to be compatible withstuds on MS27212

MS27212-1-(N)MS27212-2-(N)MS27212-3-(N)

MS27212Terminal Board AssemblyMolded-In StudDiallylisophthalate Plastic

Assembly No. Thread Max. # of Studs.138-32.1900-32.2500-28

20168

(N) indicates the number of studs in assembly, used in conjunctionwith MS18029 Cover Assembly and MS25226 Terminal ConnectingLink Bus Bar.

MS16624-1040MS16624-1040MS16624-1062

Retaining Ring

C3

A3B3C3

C3




PANEL INSERTS102 Series - Thru Bolt

Plug and Sleeve Dash Number SelectionSelect Sleeve and Plug Dash Number from Table B bydetermining the thickness closest to the panel being used.

Example:Requirements: #10 Thru-Bolt, Aluminium Alloy,Non-Flush Head for a .375 overall panel.From table select: -0 Plug = TYEP102F10-0

-06 Sleeve = TYES102F10-06

HeadStyle D - Flush F - Non-Flush C - Flush, C’sink Hole

Plug

Sleeve

* See Table B

Part Number SelectionTwo part numbers-Sleeve & Plug-are required.Example:

TYE S 1 0 2 F 10 - 08TYE P 1 0 2 C 10 - 1

Length Dash Number: See Table BSize: See Table A

Head Style: C = Flush Head, Countersunk Hole D = Flush Head F = Non-Flush Head

Type: Thru-BoltMaterial:0 = Aluminium Alloy

Part Type: P = Plug, S = Sleeve

Size

810

AHole Dia

BBody Dia

CHead Dia

DC’Sink Dia

E°Head Angle

.169

.194.278.309

.500

.625.332.382

13°13°

Table A

Typical Assembly

Series 102, Thru-Bolt Plug & Sleeve assembly.

Young Eng.Part #

DelronPart #

PartType

HeadStyle

GHeight

-04-06-08-10-12

PlugDash #

SleeveDash # H

G .085 .116

-0 -1

.250

.375

.500

.625

.750

.165

.290

.415

.540

.665

.281

.406

.531

.656

.781

= Panel Thickness

Table B

TYEP102C10-0TYEP102D10-0TYEP102D10-1TYEP102F10-0

TYES102D10-04TYES102D10-06TYES102D10-08TYES102D10-10TYES102F10-04TYES102F10-06TYES102F10-08

HoleDiameter

P102C10-0P102D10-0P102D10-1P102F10-0

S102D10-04S102D10-06S102D10-08S102D10-10S102F10-04S102F10-06S102F10-08

PlugPlugPlugPlug

SleeveSleeveSleeveSleeveSleeveSleeveSleeve

Flush, C’Sunk HoleFlushFlush

Non-Flush

FlushFlushFlushFlush

Non-FlushNon-FlushNon-Flush

.085

.085

.116

.085

.165

.290

.415

.540

.165

.290

.415

.194

.194

.194

.194

.194

.194

.194

.194

.194

.194

.194

HHeight

Young Eng.Part #

DelronPart #

PartType

HeadStyle

HoleDiameter




InternalThread Int. Length

ExternalThread Ext.

NAS1394Insert, LightweightSelf-Locking &Non Self-Locking,Threaded Metal

"-" Indicates Alloy Steel,“C” Indicates Corrosion Resistant SteelAdd an "L" after Dash # for Self-Locking

NAS1395Insert, Heavy DutySelf-Locking &Non Self-Locking,Threaded Metal

"-" Indicates Alloy Steel,“C” Indicates Corrosion Resistant SteelAdd an "L" after Dash # for Self-Locking

Length

.2500-20

.3125-18

.3750-16

.4375-14

NAS1395

.1380-32

.1640-32

.1900-32

.2500-28

NAS1394NAS1394

.250

.3125

.3125

.375

C06L

C08L

C3L

C4L

.1640-32

.1900-32

.2500-28

.3125-24

.2500-20

.3125-18

.3750-16

.4375-14

.250

.3125

.375

.4375

C08

C3

C4

C5

C08L

C3L

C4L

C5L

NAS1130

Tangless Insert, Helical CoilScrew Thread, Free Running, Self-LockingType 304 Corrosion Resistant Steel

Insert Color Identification:- No Finish, Free Running: None- No Finish, Self-Locking: Red (Dye)- Dry Film Lube, Free Running: Dark Gray- Dry Film Lube, Self-Locking: Dark

-02-10-02L10-04-10-04L10-06-10-06L10-08-10-08L10-3-10-3L10-4-10-4L10-4F10

-4FL10

NAS1130

NominalThread

.086-56

.112-40

.138-32

.164-32

.190-32

.250-20

.250-28

.086

.112

.138

.164

.190

.250

.250

No Letter after the First Dash # designates: Free Running“L” after the First Dash # designates: Self-LockingAdd a “D” after the Second Dash # to designate: Dry Film LubricantAdd a “P” after the Second Dash # to designate: Cadmium PlatingNo Letter after the Second Dash # designates: No Finish

-02-15-02L15-04-15-04L15-06-15-06L15-08-15-08L15-3-15-3L15-4-15-4L15-4F15

-4FL15

Length NAS1130

.129

.168

.207

.246

.285

.375

.375

-02-20-02L20-04-20-04L20-06-20-06L20-08-20

----3-20-3L20-4-20

----4F20

-4FL20

Length NAS1130

.172

.224

.276

.328

.380

.500

.500

Length NAS1130

.215

.280

.345

.410

.475

.625

.625

Length NAS1130

.258

.336

.414

.492

.570

.750

.750

Length

Free Running Insert Self-Locking Insert* Note - Length dimensions are for reference only

-02-25----04-25

----06-25

----08-25-08L25-3-25-3L25-4-25

----4F25

---

-02-30---

-04-30---

-06-30-06L30-08-30

----3-30-3L30-4-30

----4F30

-4FL30

Thread Int. Thread Ext.




-101-101L-102

-102L-103

-103L-201

-201L-202

-202L-203-203L

MS51830Insert, Mini & LightweightLocked In, Key LockedCorrosion Resistant SteelAlternate # - NAS1394"A" in lieu of “-” for Alloy Steel"L" after Dash # for Internal Thread Lock

MS51831Insert, Heavy DutyLocked In, Key LockedCorrosion Resistant SteelAlternate # - NAS1395"A" in lieu of “-” for Alloy Steel"L" after Dash # for Internal Thread Lock

InternalThread

LengthExternalThread MS51830

.138 - 32

.112 - 40 .170

.312.190 - 32

.3125 - 24

InternalThread

LengthExternalThread

.3750 - 16

MS51831

-202-202L

-203L

-204L

.5000 - 13

.5625 - 12.3750 - 24

.2500 - 28

.1900 - 32 .312

.375

.437

.500

.4375 - 14

.170.2160 - 28

.1900 - 32

.3125 - 18

.250 - 28

.3125 - 24

.3750 - 16

.4375 - 14

.375

.437

LockingTabs

2

2

2

2

4

LockingTabs

2

2

4

4

-201-201LA201L

.086 - 56 .120.1640 - 32 2

MS21209Helicoil Insert"C" indicates Coarse Thread"F" indicates Fine Thread"L" indicates Dry Film Lube"P" indicates Cadmium Plating

C0210C0410C0410LC0410PC0610C0610LC0610PC0810C0810LC0810PC1-10C4-10

Length MS21209MS21209MS21209Coarse

Thread, UNC




MS21209Length

F0610F0810F1-10F1-10LF1-10PF4-10F4-10LF4-10PF5-10F6-10

Length MS21209MS21209MS21209Fine

Thread, UNFF0615F0815F1-15F1-15LF1-15PF4-15F4-15LF4-15PF5-15F6-15

F0625F0825F1-25F1-25LF1-25PF4-25F4-25LF4-25PF5-25F6-25

F0620F0820F1-20F1-20LF1-20PF4-20F4-20LF4-20PF5-20F6-20

MS21209Length

.138

.164

.190

.250

.312

.375

.345

.410

.475

.625

.781

.938

.276

.328

.380

.500

.625

.750

.207

.246

.285

.375

.469

.562

.138-40

.164-36

.190-32

.250-28

.3125-24.375-24

.086-56

.112-40

.138-32

.164-32

.190-24

.250-20

.086

.112

.138

.164

.190

.250

.129

.168

.207

.246

.285

.375

.172

.224

.276

.328

.380

.500

.215

.280

.345

.410

.475

.625

LengthLength

LengthLength

®




NAS1832 - INSERTBlind Threaded / Sandwich Panel

No letter after Basic Part # indicates Carbon SteelAdd "C" after Basic Part # for Corrosion Resistant"M" after Second Dash # indicates Dry Film Lubricant

INSERTS

NAS1833 - INSERTThru Threaded / Sandwich Panel

No Letter after Basic Part # indicates Carbon SteelAdd "A" after Basic Part # for AluminiumAdd "C" after Basic Part # for Corrosion Resistant

ThreadPart #NAS1832-08-3NAS1832-08-3MNAS1832-08-4NAS1832-08-6NAS1832-3-3NAS1832-3-3MNAS1832-3-4NAS1832-3-5NAS1832-3-6NAS1832-3-7NAS1832-4-4

.375

.375

.500

.750

.375

.375

.500

.625

.750

.875

.500

.1640-32

.1900-32

.2500-28

Length (L) J

.367

.367

.467

ThreadPart #NAS1833-08-250NAS1833-08-375NAS1833-08-500NAS1833-3-250NAS1833-3-300NAS1833-3-375NAS1833-3-500NAS1833-3-750

.250

.375

.500

.250

.300

.375

.500

.750

.1640-32

.1900-32

Length (L) J

.367

.367

Clearance HolePart #NAS1834-08-250NAS1834-08K250NAS1834-08K375NAS1834-08-500NAS1834-08K500NAS1834-3-250NAS1834-3K250NAS1834A3-250NAS1834-3-375NAS1834-3K375NAS1834-3K400NAS1834-3-500NAS1834-3K500NAS1834-3K750NAS1834-4-375NAS1834-4-500NAS1834-4K500NAS1834-4-750NAS1834-4K750

.250

.250

.375

.500

.500

.250

.250

.250

.375

.375

.400

.500

.500

.750

.375

.500

.500

.750

.750

.168 - .174

Length (L) J

.367

.367

.195 - .201

.256 - .263 .467

NAS1834 - INSERTCountersunk and Thru ClearanceHole Sandwich Panel

Suffix "K" after 1st Dash # indicates Countersunk"A" after Basic Part # indicates Aluminium"C" after Basic Part # indicates Corrosion Resistant




NAS1835 - INSERTMolded In, Blind ThreadedFloating Sandwich Panel

No Letter after Basic Part # indicates Carbon Steel"A" after Basic Part # indicates Aluminium Alloy Housing"C" indicates Corrosion Resistant"M" indicates Solid Film Lubricant

NAS1836 - INSERTBlind Threaded / Lightweight, Sandwich Panel

No Letter after Basic Part # indicates Carbon Steel"A" after Basic Part # indicates Aluminium Alloy Housing"C" indicates Corrosion Resistant

ThreadPart #NAS1835-08NAS1835C08NAS1835-3MNAS1835A3NAS1835-3

.1640-32

.1900-32

L

.37

.43

J

.500

.500

A

.685

.685

.219

.250

.281

.343

.375

.437

.469

.500

.219

.250

.281

.312

.343

.343

.375

.406

.437 .465 .500 .620

.219

.219

.250

.281

.312

.343

.375

.375

.406

.437

.500

.563

.620

ThreadPart #NAS1836-06-07NAS1836-06-08NAS1836-06-09NAS1836-06-11NAS1836-06-12NAS1836-06-14NAS1836-06-15NAS1836-06-16NAS1836-08-07NAS1836-08-08NAS1836-08-09NAS1836-08-10NAS1836-08-11NAS1836C08-11NAS1836-08-12NAS1836-08-13NAS1836-08-14NAS1836-08-15NAS1836-08-16NAS1836-08-20NAS1836-3-07NAS1836-3C07NAS1836-3-08NAS1836-3-09NAS1836-3-10NAS1836-3-11NAS1836-3-12NAS1836C3-12NAS1836-3-13NAS1836-3-14NAS1836-3-16NAS1836-3-18NAS1836-3-20

.1380-32

.1640-32

Length (L)

.1900-32




DiameterMin Max Dash #7/161/2

9/1611/1613/1615/161-1/161-5/161-9/16

1-13/162-1/162-5/162-9/16

2-13/163-1/163-5/163-9/164-1/164-5/165-1/8

5-9/16

06S 08S 10S 12S 16S 20S 24S 28S 32S 36S 40S 44S 48S 52S 56S 60S 64S 72S 80S 88S 96S

Dash # 06H 08H 10H 12H 16H 20H 24H 28H 32H 36H 40H 44H 48H 52H 56H 60H 64H 72H 80H 88H 96H

Q200M - HOSE CLAMPS

QS200M#SAll StainlessSlotted Safety Collar

QS200M#HAll Stainless

Slotted Hex Head ScrewQS200M#S QS200M#H

MS35842 - HOSE CLAMP

Low Pressure

AN737 - HOSE CLAMPS

DiameterMin Max Part #7/327/161/2

9/16

5/825/3229/321-1/16

6504650665086510

Part #66046606

6608 / 36086610

Heavy Duty Stainless

HOSE CLAMPSMiniature

DiameterMin Max7/161/2

9/1611/16 13/1615/161-1/161-5/161-9/16

1-13/162-1/162-5/162-9/16

2-13/163-1/163-5/163-9/164-1/164-5/165-1/8

5-9/16

25/3229/321-1/161-1/41-1/21-3/4

2 2-1/42-1/22-3/4

33-1/43-1/23-3/4

44-1/44-1/2

55-1/2

66-1/2

Dash # 06H 08H 10H 12H 16H 20H 24H 28H 32H 36H 40H 44H 48H 52H 56H 60H 64H 72H 80H 88H 96H

Q100M - HOSE CLAMPS

QS100M#HCarbon SteelSlotted Hex Head Screw

QS100M#H

25/3229/321-1/161-1/41-1/21-3/4

22-1/42-1/22-3/4

33-1/43-1/23-3/4

44-1/44-1/2

55-1/2

66-1/2

Hose Diameter RangeMin Max7/16

11/161-1/16

1-13/162-9/163-5/164-1/8

25/321-1/4

22-3/43-1/24-1/4

7

-10-11-12-13-14-15-16

MS35842

Diameter

7/161/2

9/1611/1613/1615/1661/64

11-5/64

1-21/641-3/81-5/81-7/82-1/8

2-13/322-5/8

2-29/323-1/8

22242630343844464856586674829198

107114

AN737TW

11/163/4

13/1615/161-1/161-3/161-3/8

1-7/161-1/21-3/4

1-13/162-1/162-5/162-9/16

2-27/323-1/16

3-11/323-9/16

Min Max




23456789

10

To Fit Diameter MS21919WDG MS21919WDG21222324252627282930323435363840424448

1-5/161-3/8

1-7/161-1/2

1-9/161-5/8

1-11/161-3/4

1-13/161-7/8

22-1/8

2-3/162-1/42-3/82-1/2

2-21/322-3/4

3

1/8 3/16 1/4

5/16 3/8

7/16 1/2

9/16 5/8

11/16 3/4

13/167/8

15/161

1-1/161-1/8

1-3/161-1/4

23456789

1011121314151617181920

Dia.1/8

3/161/4

5/163/8

7/161/2

9/165/8

11/16

3/413/16

7/815/16

11-1/161-1/81-1/41-3/81-1/2

MS21919WCH12131415161718202224

MS21919WCH Dia.23456789

1011

MS21919WHSteel Band,White Silicone Cushion(4000 F)

Dia.11/16

3/413/16

7/815/16

11-11/16

1-1/81-1/4

111213141516171820

MS21919WH Dia.

MS21919WDF Aluminium Band,Nitrile Cushion(212 0 F)

To Fit Dia.1/8

3/161/4

5/163/8

7/161/25/83/4

MS21919WDF2345678

1012

MS21919WCJCorrosion Resistant Band,Fluorosilicone Cushion(4500 F)

To Fit Dia.1/8

3/161/4

5/163/8

7/161/2

9/165/8

11/163/4

MS21919WCJ23456789

101112

MS21919WDG - CUSHION CLAMPAluminium Band,Chloroprene Cushion (212Use “DG” to remove locking wedge feature (W)

0 F)

MS21919WCHCorrosion Resistant Band,White Silicone Cushion (4000 F)

To Fit Diameter

MS21919WH1/8

3/161/4

5/163/8

7/161/2

9/165/8




Dia.1/8

3/161/4

5/163/8

7/161/2

9/16

5/811/16

3/413/16

7/815/16

11-1/8

MS25281R10R11R12R13R14R15R16R18

MS25281 Dia.R2R3R4R5R6R7R8R9

AN743-12

AN742Clamp, Plain, Steel,"D" after Base # is Aluminium

AN742-1/8

3/161/4

5/163/8

7/161/2

9/165/8

11/163/4

23456789

101112

To Fit Diameter

M85052/2Clamp, LoopFluid Resistant, Tube

AN742D1/8

3/161/4

5/163/8

7/161/2

9/165/8

11/163/4

23456789

101112

To Fit Diameter

MS25281Wire Loop Clamp,Plastic

AN743BracketSupport Clamp

AN743-13

AN735DClamp LoopType BondingAluminium

AN735D.125

.1875.250.313.375

.4375.500.625.688.7501.00

2345678

10111216

Fits Dia.

23456789

101112

M85052/2-

AN735D1.251.881.251.351.50

1.6251.6881.7501.8752.0002.500

1819202224262728303240

Fits Dia.

Clamp KeeperSpring steel, notched on both ends.Assists the user threading a nutonto the clamp screw.

MA12-02588




NYLON FITTINGSImperial Eastman Nylo-Seal Flareless Tube Fittings. Nowrenches, flaring tools, benders or other tools are usedfor installation. The nut revolves around the sleeves as itis tightened, prevented twisting and weakening of theplastic tubing. For use with Poly-Flo tubing.

Part #259N04261N04262N04264N04265N04

266N04x02268N042x02269N04x02271N04x02272N04x02

282N04

DescriptionInsert

Nut/SleeveUnion

Union TeeUnion Elbow

Female ConnectorMale Connector

Male ElbowMale Run Tee

Male Branch TeeBulkhead Union

BRASS FITTINGSImperial Eastman Brass Flareless Tube Fittings. Thenut revolves around the sleeve as it is tightened,preventing twisting and weakening of the plastictubing. For use with Poly-Flo tubing.

261P04262P04264P04

266P04X02268P04X02269P04X02272P04X02

Nut/SleeveUnion

Union TeeFemale Connector

Male ConnectorMale Elbow

Male Branch Tee

POLY-FLO TUBING POLY-FLOTUBE CUTTERImperial Eastman Poly-Flo Tubing. No

wrenches, flaring tools, benders or other toolsare used for installation. To be used withImperial Eastman Nylon and Brass Fittings.

Part # Description

44PN44PB

44PGN44PO

Clear Poly-Flo TubingBlue Poly-Flo Tubing

Green Poly-Flo TubingOrange Poly-Flo Tubing

Part # Description

307-FP Poly-Flo Tube Cutter

NORPRENEBLACKTUBING0023-071

0716-1530711-1530701-1530716-0150711-0150706-015

Tee ConnectorElbow ConnectorInline Connector

TeeElbowInline

DescriptionUsed with 1/4" hose or tubing.

20x40N86220x40N66240N462

271N04x02 272N04x02

20x40P27220x40P86220x40P662

Description

0711-153 0701-153

0706-015 0716-015 0711-015

259N04 261N04 262N04

265N04

269N04x02

264P04

The "Snip," plastic tube and hoseshear is a compact tool designed toevenly cut Poly-Flo tubing. Shear isspring loaded with a replaceablehardened steel blade.

Norprene thermoplastic elastomer tubingis a rubber-like black tubing that will notweaken or crack, even after years of heator ozone exposure. For use with inserttype fittings.

Part #

Part # 0716-153

269P04x02

262P04261P04

282N04

NYLON INSERTFITTINGS

® ®




AN804 - TEE

37° Flared Tube, BulkheadTee / Bulkhead on RunAN804D# (Aluminium)AN804-# (Steel)AN804J# (Corrosion Resistant)

Dash No.AN804 Tube O.D. Thread Size

234568

1012

.125

.188

.250

.312

.375

.500

.625

.750

.312-24

.375-24

.437-20

.500-20

.562-18

.750-16

.875-141.062-12

AN806 - PRESSURE PLUG

37° Flared TubeAN806D# (Aluminium)AN806-# (Steel)AN806J# (Corrosion Resistant)

M-.047

Q-.047 V

S-.047

1.4061.4371.5781.6091.7972.0942.3752.656

.766

.828

.891

.9531.0621.2501.4531.656

.828

.891

.953.1.0161.0781.3441.5471.766

.312

.375

.437

.500

.562

.750

.8751.602

5/16 - 243/8 - 247/16 - 201/2 - 209/16 - 183/4 - 167/8 - 14

1-1/16 - 121-5/16 - 12


234568

101216

1/83/161/4

5/163/81/25/83/41

A B C

41/6443/6447/6449/6413/1615/161-7/641-13/641-9/32

9/165/8

49/64

.438

.500

.563

.750

.8751.1251.375

15/32

17/32

13/16

QAcrossWrenchPads V M

S

A

B C

Alternate: AS5168

Alternate: AS1033




D

30º

F L

K.125

B

.073

THREAD TPer MIL-S-7742

CHAMFER 45º

E

AN814 - BLEEDER PLUG

Screw ThreadAN814-#D (Aluminium)AN814-# (Steel)AN814-#J (Corrosion Resistant)

Add an “L” at end of Part # for Lockwire Holes

5/16-243/8-24

7/16-201/2-20

9/16-183/4-167/8-14

1- 1/16-121- 5/16-121- 5/8-12


234568

10121620

1/83/161/4

5/163/81/25/83/41

1-1/4

BDia. LD

7/329/32

11/3213/3215/32

5/83/4

15/161-3/161-1/2

35/64

KE

.563

.625

.688

.750

.8131.0001.1251.3751.6251.875

.250

.313

.364

.427

.482

.660

.773

.9451.1951.507

5/163/8

7/161/2

9/163/47/8

1-1/81-3/81-5/8

9/16

5/8

23/32

25/32

1

+.004

+.005

+.016

5/1621/64

3/8

27/6415/32

17/32

19/32

AN807 - ADAPTER

Straight, Tube 37° Flared to HoseAN807-#D (Aluminium)AN807-# (Copper Alloy)AN807-#J (Corrosion Resistant)

Dash No.AN807

Tube O.D. andHose I.D. Thread Size

468

101216

1/43/81/25/83/41

7/16-209/16-183/4-167/8-14

1-1/16-121-5/16-12

A

2-13/162-61/643-7/64

3-17/643-31/643-31/64

A

THREAD T

DRILL DEPTH 1-5/8 FOR -8THROUGH -24 SIZES

FITTING END INACCORDANCEWITH MS33657,STYLE E, FORTUBE SIZE SPECIFIED.

FDia.+.002-.003

Alternate: AS5180

Alternate: AS5169




AN816 - ADAPTER

Straight, Pipe to 37° FlaredAN816-#D (Aluminium)AN816-# (Steel)AN816-#J (Corrosion Resistant)

.125

.250

.125

.250

.125

.250

.375

.500

.250

.375

.500

.750

.500

.7501.000.750

1.000

Dash No.AN816

Tube O.D. Flared EndThread Size

234

4-45

5-46-26

6-66-878

1010-1212-812

12-1616-12

16

1/83/16

Pipe ThreadANPT

G M+0161.0161.0471.1091.3751.1411.3751.1871.3751.4061.625

.4375-20

+.003-.004

+.004

+.005

1/4

.3125-24

.3750-24

5/16

3/8

1/2

5/8

3/4

1

.5000-20

.5625-18

.7500-16

.8750-14

1.0625-12

1.3125-12

.438

.500

.563

.562

.563

.625

.750

.875

.813

.938

1.125

1.375

1.500

1.8281.844

2.1872.0312.219

1.953

M G

AN815 - UNION

Male to Male, 37° FlaredAN815-#D (Aluminium)AN815-# (Steel)AN815-#J (Corrosion Resistant)

5/16-243/8-24

7/16-201/2-20

9/16-183/4-167/8-14

1 1/16-121 5/16-12

Dash No.AN815

Tube O.D. Thread Size

234568

101216

1/83/161/4

5/163/81/25/83/41

E M

.563

.625

.688

.750

.8131.0001.1251.3751.625

1-3/81-9/16

1-53/642-7/642-3/16

1-7/32

1-1/4

E

Alternate: AS5174

Alternate: AS5194

M




AN818 - NUT

Flared Tube NutAN818-#D (Aluminium)AN818-# (Steel)AN818-#J (Corrosion Resistant)

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.7500-16

.8750-141.0625-121.3125-12

Dash No.AN818 Tube O.D.

ThreadMIL-S-8879

234568

101216

.125

.188

.250

.312

.375

.500

.625

.7501.000

A Dia.+.003-.000

C Dia.+.000-.010

O

.180

.242

.305

.374

.440

.570

.698

.8341.089

.375

.437

.562

.625

.687

.8751.0001.2501.500

MJ

.312

.375

.400

.484

.500

.578

.688

.750

.766

.542

.604

.620

.683

.724

.849

.9741.0211.131

+.003-.004

+.010

+.005

.375

.438

.563

.625

.688

.8751.0001.2501.500

MS20819 - SLEEVE

Flared Tube FittingMS20819-#D (Aluminium)MS20819-# (Steel)

Dash No.MS20819- Tube O.D.

234568

101216

1/83/161/4

5/163/81/25/83/41

.130

.193

.255

.318

.380

.505

.631

.7561.006

.172

.234

.297

.366

.432

.562

.690

.8261.081

.267

.329

.383

.445

.502

.682

.797

.9721.222

.438

.500

.562

.656

.688

.781

B Dia.+.003-.000

C Dia.+.000-.010

G Dia.+.000-.010

M+.016

.344

.406

J

MO

35o

M

G C B

90º CORNERSHALLBE SHARP

MS20819-#J (Corrosion Resistant)

Alternate: AS5176, AN819

Alternate: AS5175




MS20822 - ELBOW 90°

Pipe to 37° Flared TubeMS20822-#D (Aluminium)MS20822-# (Steel)MS20822-#J (Corrosion Resistant)

Dash No.MS20822-

Tube O.D.Thread

234

4-45

5-46-26

6-66-88

1010-1212-812

12-1616-12

16

1/83/16

ANPTV

S+.047-.000

Pipe Thread End

.312

.375

.438

.562

.500

.562

.750

.875

.750

.875

1.062

1.312

.766

.828

.8911.031.953

1.031

Q+.047-.000

1/4

5/16

3/8

1/2

5/8

3/4

.312-24

.375-24

.437-20

.500-20

.562-18

.750-16

.875-14

1.062-12

1.312-12

1/8

1/41/81/41/81/43/81/23/81/23/41/23/41

3/41

1.0621.1881.3121.2501.453

1.812

1.6561.781

1.625

.719

1.562

.7811.062.781

1.062.875

1.0941.1881.4381.2191.469

1.5941.9381.7191.969

Q V

S

ACROSSWRENCHPADS

1

Dash No.AN821- Tube O.D.

234568

1012

1/83/161/4

5/163/81/25/83/4

49/6453/6457/6461/641-1/161-1/4

1-29/641-21/32

5/163/8

7/161/2

9/163/47/8

1-1/16

Thread Q

Q

Q VACROSSWRENCHPADSAN821 - ELBOW 90°

37° Flared TubeAN821-#D (Aluminium)AN821-# (Steel)AN821-#J (Corrosion Resistant)

5/16-243/8-247/16-201/4-209/16-183/4-167/8-14

1-1/16-12

V


Alternate: AS1034




MS20823 - ELBOW 45°

Pipe to 37° Flared TubeMS20823-#D (Aluminium)MS20823-# (Steel)MS20823-#J (Corrosion Resistant)

Dash No.MS20823- Tube O.D.Thread

234

5

68

10

12

16-1216

1/8

3/161/4

5/163/8

1/2

5/83/4

ANPTV

.312

.375

.438

.500

.562

.750

.8751.062

S

1.453

Q+.047-.000

MS33677STYLE

1

5/16-243/8-24

7/16-201/2-20

9/16-18

3/4-167/8-14

1-1/16-12

1-5/16-12 1.312

1/8

1/43/81/2

B

B

.703

.750

.812

.969

1.0941.266

.500

.844

.9381.156

1.1881.2501.469

.625

.641

AN824 - TEE

37° Flared TubeAN824-#D (Aluminium)AN824-# (Steel)AN824-#J (Corrosion Resistant)

Dash No.AN824-

Tube O.D.

234568

1012

16

1/83/161/4

5/163/81/25/83/4

1

5/16-243/8-24

7/16-201/2-20

9/16-183/4-167/8-14

1-1/16-12

1/5-16-12

47/6451/6455/6459/641-1/321-7/32

1-27/641-5/8

1-25/32

15/321/2

11/1625/3229/32

1-3/32

Thread Q+3/64

-0

WApproximate

VApproximate

5/16

3/8

3/4

1

5/163/8

7/161/2

9/163/47/8

1-1/16

1-5/16

VPIPE THREAD P

FITTING END IN ACCORANCEWITH MS33466, STYLE GFOR TUBE SIZE SPECIFIED

THREAD T

S

45º

Q

A

BA

Pipe Thread End

Q

ACROSSWRENCHPADS

Q Q V

W

W

Alternate: AS1035





MS20826 - TEE

Pipe to TubePipe Thread on RunMS20826-#D (Aluminium)MS20826-# (Steel)MS20826-#J (Corrosion Resistant)

Dash No.MS20826-

Tube O.D.Thread

234

568

1012

16-12

16

1/83/161/4

5/163/81/25/83/4

ANPT

.312

.375

.438

.500

.562

.750

.8751.062

1.781

Q+.047-.000

1

5/16-243/8-24

7/16-20

1/2-209/16-183/4-167/8-14

1-1/16-12

1-5/16-12 1.312

1/8

1/43/81/2

1

.734

.797

.859

.9221.0311.2191.4221.625

.688

1.062

1.1881.4381.5621.6881.938

.750

3/4

V+.016-.000

S+.047-.000

Q

Q S

V

Pipe Thread End

MS20825 - TEE

Pipe to TubePipe Thread on SideMS20825-#D (Aluminium)MS20825-# (Steel)MS20825-#J (Corrosion Resistant)

Dash No.MS20825-

Tube O.D.Thread

234568

1012

1/83/161/4

5/163/81/25/83/4

ANPT

.312

.375

.438

.500

.562

.750

.8751.062

Pipe Thread End

5/16-243/8-24

7/16-201/2-20

9/16-183/4-167/8-14

1-1/16-12

1/8

1/43/8

1/23/4

.734

.797

.859

.9221.0311.2191.4221.652

.688

1.0621.1881.438

1.562

.750

PIPE THREAD P

Q QV

S

THREAD T

Q+.047-.000

V+.016-.000

S+.047-.000

Alternate: AN825

Alternate: AN826




1-9/321-7/16

1-37/64

AN827 - CROSS

Flared TubeAN827-#D ( Aluminium)AN827-# (Steel)AN827-#J (Corrosion Resistant)

Dash No.AN827-

Tube O.D.

4

5

6

8

1/4

5/16

3/8

1/2

7/16-20

1/2-20

9/16-18

3/4-16

55/64

59/64

1-1/32

1-7/32

7/16

1/2

9/16

3/4

Q+3/64

-0VThread

AN832 - UNION

Flared Tube - 3/8 Bulkhead& UniversalAN832-#D (Aluminium)AN832-# (Steel)AN832-#J (Corrosion Resistant)

Tube O.D.

234

56

8

10

12

16

1/83/16

1/45/163/8

1/2

5/8

3/4

1

5/16-243/8-24

7/16-201/2-20

9/16-18

3/4-16

7/8-14

1-1/16-12

1/5-16-12

.563

.625

.688

.750

.813

1.0001.125

1.375

1.625

2-7/32

2-29/64

2-23/32

3-1/323-5/64

Thread E H K

1-7/64

1-13/64

1-53/641-55/64

2-3/64

1-3/4

Dash No.AN832-

3/8

15/32

1/2

11/16

W

DRILL 2 HOLES THRUPER MS33656

Q Q VTHREAD T

Q

Q

90º

W

THREAD T

E

K

THREAD RELIEF1-1/2 THREADS

1/32

W

H

Alternate: AS5406

Alternate: AS1036




AN833 - ELBOW

Flared Tube andBulkhead Universal, 90°AN833-#D (Aluminium)AN833-# (Steel)AN833-#J (Corrosion Resistant)

Dash No.AN833-

Tube O.D.

234

5

6

81012

1/83/161/4

5/16

3/8

1/25/83/4

1-13/321-7/16

1-37/64

1-39/64

1-51/64

2-3/322-3/8

2-21/32

53/6457/6461/64

1-1/64

1-5/64

1-11/321-35/641-49/64

5/163/8

7/16

1/2

9/16

3/47/8

1-1/16

ThreadM

+3/64-0

Q+3/64

-0V

5/16-243/8-24

7/16-20

1/2-20

9/16-18

3/4-167/8-14

1-1/16-12

AN834 - TEE

Bulkhead andUniversal Flared TubeAN834-#D (Aluminium)AN834-# (Steel)AN834-#J (Corrosion Resistant)

Dash No.AN834-

Tube O.D.

234568

1012

1/83/161/4

5/163/81/25/83/4

1-13/321-7/16

1-37/641-39/641-51/642-3/322-3/8

2-21/32

53/6457/6461/641-1/641-5/64

1-11/321-35/641-49/64

5/163/8

7/161/2

9/163/47/8

1-1/16

Thread V

5/16-243/8-24

7/16-201/2-20

9/16-183/4-167/8-14

1-1/16-12

5/163/8

7/161/2

9/163/47/8

1-1/16

GDia.

V

Q

M

Q

90º

M+3/64

-0Q

+3/64-0

Q

Q

VM

90º

G

Alternate: MS24394, AS1038

Alternate: AS1039




AN837 - ELBOW

Flared TubeUniversal, 45o

AN837-#D (Aluminium)AN837-# (Steel)AN837-#J (Corrosion Resistant)

Dash No.AN837- Tube O.D.

2

34568

10

1/8

3/161/4

5/163/81/25/8

1 - 43/64

1 - 15/162 - 11/64

45/643/4

13/16

31/321-3/32

5/16

3/87/161/2

9/163/47/8

Thread V

5/16 - 24

3/8 - 247/16 - 201/2 - 20

9/16 - 183/4 - 167/8 - 14

AN838 - ELBOW

Flared Tube to Hose, 90o

AN838-#D (Aluminium)AN838-# (Copper Alloy)AN838-#J (Corrosion Resistant)

Dash No.AN838-

HoseI.D.

4

6

8

10

12

1/4

3/8

1/2

5/83/4

1-27/321-15/16

2-1/32

2-3/322-1/4

1-9/16

1-47/64

2-1/322-9/32

2-9/16

7/169/16

3/4

7/8

1-1/16

ThreadD

+3/64-0

F+3/64

-0K

7/16-209/16-18

3/4-16

7/8-14

1-1/16-12

TubeO.D.

1 - 3/8

1 - 17/32

41/64

1/4

3/81/2

5/8

3/4

M V

Q

45º

D K

F

90º± 2.5º

M+3/64

-0

Q+3/64

-0

Alternate: AS1040

Alternate: AS5181




2-5/64

2-11/32

2-3/8

2-37/64

2-13/32

2-5/8

2-5/8

.437

.625

.750

.937

1.000

1.125

1.250

AN840 - ADAPTER

Straight,Pipe to HoseAN840-#D (Aluminium)AN840-# (Copper Alloy)AN840-#S (Steel)

HoseI.D.

4

6

8

10

11

12

16

1/4

3/8

1/2

5/8

3/4

3/4

1

1/8

1/4

3/8

1/2

3/8

3/4

3/4

Pipe ThreadANPT

B+1/32

-0C L

25/64

19/32

19/32

49/64

19/32

25/32

25/32

Dash No.AN840-

AN842 - ELBOW

Pipe to Hose, 90 o

AN842-#D (Aluminium)AN842-# (Copper Alloy)AN842-#S (Steel)

HoseI.D.

46

8

10

1216

1/43/8

1/2

5/83/4

1

1/81/4

3/8

1/2

25/321-3/32

1-3/16

1-13/64

Pipe ThreadANPT

B+1/32

-0C

M+3/64

-07/165/83/4

15/16

1-25/321-29/32

1-63/64

2-11/64

Dash No.AN842-

1-1/8 2-13/641-19/323/4

BC

K

DRILLDEPTH R

M C

LCHAMFER45º X Q

PIPE THREAD(MIL-P-7105)

30º±5º

FITTING END INACCORDANCE WITHMS33658

30º±5º

90º±2-1/2º

B

Alternate: AS5183




AN844 - ELBOW

Pipe to Hose, 45 o

AN844-#D ( Aluminium)AN844-# (Copper Alloy)AN844-#S (Steel)

HoseI.D.

468

101216

1/43/81/25/83/41

1/81/43/81/2

5/87/8

59/641-5/32

Pipe ThreadNPT

B+3/64

-07/165/8

3/415/16

1-5/81-11/161-23/321-25/32

Dash No.AN844-

AN893 - BUSHING

Female Straight to Male StraightScrew Thread ReducerAN893-#D ( Aluminium)AN893-# (Steel)AN893-#J (Corrosion Resistant)

Tube O.D.

123456789

101112

121131415

15116

3/8

5/163/81/23/41

1-1/43/81/23/41

1-1/41/25/83/41

1-1/45/83/4

Thread Tube O.D. Thread M

.750

.8131.0001.3751.6251.875.813

1.0001.3751.6251.8751.0001.1251.3751.6251.8751.1251.375

Dash No.AN893-

1-7/64

G

OverallExternallyThreaded End

InternallyThreaded End

5/16

1/4

1/2

.4375-20

.5000-20

.5625-18

.7500-16

1/2-209/16-183/4-16

1-1/16-121-5/16-121-5/8-129/16-183/4-16

1-1/16-121-5/16-121-5/8-123/4-167/8-14

1-1/16-121-5/16-121-5/8-127/8-14

1-1/16-12

25/32

31/32

1-7/64

31/32

1-11/641-7/32

31/32

1-3/81-11/32

M

C

B

45º ±2-1/2º

M

G

M+3/64

-0C

3/4 1-13/64 1-1/8 1-13/64

Alternate: AS5186

Alternate: AS5172




AN910 - COUPLING

Female to Female Pipe ThreadAN910-#D (Aluminium)AN910-# (Copper Alloy)

PipeThread

1

23

46

810

1/8

1/43/8

1/23/4

11-1/4

27/32

1-1/81-7/32

1-19/321-5/8

.625

.813

.938

1.1881.375

1.7502.125

B+1/32

-0K

Dia.P

Dia.

.327

.423

.557

.688

.897

1.1281.471

37/64

25/3259/64

1-5/321-23/64

1-11/162-3/32

Dash No.AN910-

1-15/16

CB—2

P

B

K

PIPE THREAD, BOTH ENDS

C

AN894 - BUSHING

Female Straight to Male 37°Screw Thread ExpanderAN894D-# (Aluminium)AN894-# (Steel)AN894J-# (Corrosion Resistant)

Tube O.D.

3/8

3/16

5/161/4

5/163/81/4

5/163/81/2

Thread Tube O.D. Thread E

.625

.750

1.000

1.125

Dash No.AN894

1-3/16

D

OverallExternally Threaded EndInternally Threaded End

5/16

1/4

1/2

.8750-14

.5625-18

.375-24

.500-20.4375-20.500-20

.5625-18

.4375-20.500-20

.5625-18.750-16

1-19/64

1-1/21-25/64

1-3/81-37/64

.688

.813

1-35/64

1-43/641-21/321-41/64

1-3/4

.5000-20

.3125-24

.7500-16

.4375-201/4

.3750-243/16

5/8

.4375-20

3-24-24-35-46-46-58-48-58-6

10-410-510-610-8

1/8

ED

THREAD INTERNAL

Alternate: MS24398, AS5173

Alternate: AS4859




ExternalPipe Thread

Dash No.AN912-

InternalPipe Thread C

123456789

101112

AN912 - BUSHING

PipeAN912-#D (Aluminium)AN912-# (Copper Alloy)AN912-#J (Corrosion Resistant)

1/81/41/83/81/41/81/23/81/43/41/2

3/8

1/4

3/8

1/2

3/4

1

25/32

1-1/64

1-1/16

1-1/4

.937

1.125

1.375

.625

.750

+.004

+.005

.327

.423

.327

.557

.423

.327

.688

.557

.423

.897

.688

.557

+.000-.016

+.000-.019+.000-.016+.000-.028

+.000-.019+.000-.016

+.000-.034+.000-.028

+.000-.019

+.000-.049

+.000-.034+.000-.028

B

K

AINTERNALPIPE THREAD(MIL-P-7105)

30°+ 5°

INTERNALPIPE THREAD

(MIL-P-7105)

T

C

AN911 - NIPPLE

PipeAN911-#D (Aluminium)AN911-# (Copper Alloy)AN911-#J (Corrosion Resistant)

BLL

K

30°+ 5°

C

FITTING END INACCORDANCEWITH MS33677,STYLE C, PIPETHREAD P

Dash No.AN911- LC

KDia.

1/8

1/4

3/8

1/2

3/4

1

1-1/4

Pipe ThreadANPT

1

2

3

4

6

8

10

31/32

1-7/16

1-15/32

1-27/32

1-29/32

2-5/16

2-11/32

.438

.625

.750

.938

1.125

1.375

1.750 +.016

+.005

+.004

+.003-.004 .203

.279

.418

.508

.727

.914

1.256

49/64

25/32

31/32

63/64

25/64

25/64

+.003-.004+.004+.003-.004+.004+.003-.004

+.004

+.004

KDia.

FITTING END INACCORDANCE WITHMS33677, STYLE C,FOR APPLICABLEPIPE THREAD

B±1/32

B±1/32

Alternate: AS4861

Alternate: AS4860




AN915 - ELBOWAlternate: AS4855

Pipe 45 o


Int. & Ext. PipeThread ANPT

1

2

3

4

6

1/8

1/4

3/8

1/2

3/4

39/64

57/64

15/16

1-11/64

1-11/32

5/8

13/16

15/16

1-3/16

1-3/8

CM

+3/64-0

PDia.

37/64

25/32

59/64

1-5/32

1-23/64

Dash No.AN914-

55/64

1-7/32

1-19/64

1-39/64

1-47/64

Pipe Internal andExternal Thread, 90 o


1

2

3

4

6

8

1/8

1/4

3/8

1/2

3/4

1

15/32

5/8

23/32

29/32

31/32

1-1/8

5/8

13/16

15/16

1-3/16

1-3/8

1-3/4

UApproximate

5/16

7/16

1/2

5/8

3/4

7/8

Dash No.AN915-

23/32

1-3/64

1-1/16

1-11/32

1-3/8

1-23/32

37/64

25/32

59/64

1-5/32

1-23/64

1-11/16

B C

P

M

90°

PIPE THREAD

C

M

45º

U

B+3/64

-0

M+3/64

-0P

Dia.CB

+3/64-0

PIPE THREAD

PIPE THREAD

PIPE THREAD

Int. & Ext. PipeThread ANPT


PB




Internal PipeThread ANPT

1

2

3

4

6

.125

.250

.375

.500

.750

.641

.891

.969

1.234

1.344

.625

.813

.936

1.188

1.375

.578

.781

.922

1.156

1.359

Dash No.AN916-

Pipe Internal Thread, 90o


1

2

3

4

6

8

1/8

1/4

3/8

1/2

3/4

1

1-9/32

1-25/32

1-15/16

2-15/32

2-11/16

3-1/4

37/64

25/32

59/64

1-5/32

1-23/64

1-11/16

Dash No.AN917-

Pipe Internal ThreadAN917-#D (Aluminium)AN917-# (Copper Alloy)AN917-#J (Corrosion Resistant)

5/8

13/16

15/16

1-3/16

1-3/8

1-3/4

P90º

P

B

P— RADIUS2

B

CACROSSWRENCH

PADS

P 90º

P

B

K

CACROSSWRENCH

PADS

PIPE THREAD INACCORDANCEWITH MIL-P-7105

B—2

B—2

PDia.

B+3/64

-0C

PDia.

CB

+3/64-0

Internal PipeThread ANPT


AN917 - TEEAlternate: AS4857




Tube O.D.0123456789

1011121314151617181920212223

5/8

3/161/41/8

3/161/4

5/161/8

3/161/4

5/163/81/43/81/21/4

5/163/81/25/81/45/83/4

Thread (T) Tube O.D. Thread (R) S1-11/64

1-1/41-9/32

1-23/641-19/641-21/64

Dash No.AN919-

5/811/1637/6439/64

E WSmall EndLarge End

1/2

3/16

3/4

7/16-20

3/4-16

7/8-14

1-1/16-12

5/8

1-27/641-29/64

23/32

51/64

57/64

1/8

3/8-247/16-205/16-243/8-24

7/16-201/2-20

5/16-243/8-24

7/16-201/2-20

9/16-187/16-209/16-183/4-16

7/16-201/2-20

9/16-183/4-167/8-14

7/16-207/8-14

1-1/16-12

5/16-241/4

5/16

3/8

1

3/8-24

1/2-20

9/16-18

1-5/16-12

1-17/32

1-21/32

1-13/32

1-3/4

1-51/64

1-57/642

1-27/322-3/642-5/32

.625

.688

1.375

.813

1.000

1.125

.750

1.625

Internal Pipe Thread ANPT

123468

1/81/43/81/23/41

1-9/321-25/321-15/162-15/322-11/163-1/4

5/813/1615/161-3/161-3/81-3/4

B+3/32

-0C P

Dia.37/6425/3259/641-5/32

1-23/641-11/16

Dash No.AN918-

Pipe Internal ThreadAN918-#D (Aluminium)AN918-# (Steel)AN918-#J (Corrosion Resistant)

External ThreadFlared Tube, 37° FlareAN919-#D (Aluminium)AN919-# (Steel)AN919-#J (Corrosion Resistant)

WE

S

THREAD (T)

THREAD (R)

15º ± 5ºto dimension E

AN918 - FEMALE CROSSAlternate: AS4858

AN919 - REDUCER (MALE TO MALE)Alternate: AS5174




TubeO.D.

234568

1012162024

1/83/161/4

5/163/81/25/83/41

1-1/41-1/2

5/16-243/8-24

7/16-201/2-20

9/16-183/4-167/8-14

1-1/16-121-5/16-121-5/8-121-7/8-12

.563

.625

.688

.750

.8131.0001.1251.3751.6251.9382.188

Thread EA

.629

.699

.771

.842

.9141.1271.2701.5551.8272.1842.465

Dash No.AN924-

Tube, Bulkhead andUniversal NutAN924-#D (Aluminium) AN924-# (Steel)

B

+ .003- .004

+ .016

+ .020

7/32

1/4

17/645/16

23/64

13/32

TubeO.D.

234568

101216

1/83/161/4

5/163/81/25/83/41

.263

.325

.378

.441

.503

.683

.799

.9741.224

5/327/329/32

11/3227/6435/6443/6413/161-1/16

BDia.+ .000_ .003

CDia.

H

17/32

9/165/8

Dash No.AN929-

AN929 - CAP ASSEMBLY

Pressure SealFlared Tube FittingAN929-# (Aluminium)AN929-#J (Corrosion Resistant)

3/4

7/8

G

A

B

ETYP

THREAD T(MIL-S-8879)

15º ±5º TO G DIA

H

C

B

GDia..500.562.625.687.750.937

1.0621.2741.5241.8382.093

AN924-#J (Corrosion Resistant)

AN924 - NUTAlternate: AS5178




Tube nut with groovefor O-RingAN6289D# or AS5179D## (Aluminium)AN6289-# or AS5179-## (Steel)AN6289J# or AS5179J## (Corrosion Resistant)

TubeO.D.

234568

101216

1/83/161/4

5/163/81/25/83/41

5/16-243/8-247/16-201/2-209/16-183/4-167/8-14

1-1/16-121-5/16-12

.563

.625

.688

.750

.8131.0001.1251.3751.625

Thread FA

.65

.72

.79

.87

.941.151.301.591.88

Dash No.AN6289

1/4

9/32

B

Tube, Internal ThreadAN938D# (Aluminium)AN938-# (Steel)

TubeO.D.

4568

10

1/45/163/81/25/8

7/16-201/2-20

9/16-183/4-167/8-14

11/163/4

13/161-1/161-3/16

ThreadC

Dia.K

+3/32-0

SApprox.

3/4

1-1/161-3/16

Dash No.AN938

13/161-1/161-3/16

RApprox.

1-5/8

22-5/16

HApprox.

1/2

11/163/4

9/167/81-1/23/4

19/6411/3225/64

7/16

R

CR

90º

MACROSS PADS C

S

K—2

K—2

SPAD DETAIL

K

THREAD T

MAX DEPTH

A

A

F

B

A

15º +5º

THREAD T

AN938 - TEEAlternate: AS5192

AN6289 - NUTAlternate: AS5179




B

A

AA—2

THREAD T

A—2

L

SThread T

Drill DepthThread T

Fitting end in accordance withMS33514, Style E,Except as shown

Groove corners at the centre of hex± .031 groove to be .030deep x 90º ± 5ºto identify as a special part

E

N

Fitting end inaccordance withMS33656, Style E,Except as shown

.688

.781

.875

MS21900 - ADAPTER

Adapter, FlarelessTube to a Flared TubeMS21900D# (Aluminium 2024)MS21900-# (Steel)MS21900J# (Corrosion Resistant)MS21900W# (Aluminium 7075)MS21900V#P (CRES Steel, Cad Plated)

TubeO.D.

34568

1012

3/161/4

5/163/81/25/83/4

.3750-24

.4375-20

.5000-20

.5625-18

.7500-16

.8750-141.0625-12

.625

.688

.750

.8131.0001.1251.375

Thread SE

1.1561.1881.1561.2811.4691.6881.938

Dash No.MS21900

THRU

N

THRU.563

MS20813-1 - CAPPneumatic Valve Cap, High Pressure

Square HeadSafety Wire HoleMS20913-#D (Aluminium)MS20913-# (Copper)MS20913-#S (Steel)

0123468

1/16-271/8-271/4-183/8-181/2-143/4-14

1-11-1/2

.188

.281

.375

.438

.563

.625

.813

ThreadNPT

A+.002 / -.010 L

.188

.250

.281

.312

.375

.438

.500

Dash No.MS20913-

.484

B

.625

.641

.797

.312

.328

MS20913 - PLUGAlternate: AS4863




Flareless TubeMS21902D# (Aluminium 2024)MS21902-# (Steel)MS21902J# (CRES Steel 304)MS21902W# (Aluminium 7075)MS21902V#P (CRES Steel, Cad Plated)

234568

1012

1/83/161/4

5/163/81/25/83/4

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.7500-16

.8750-141.0625-12

ThreadMIL-S-8879

M

.563

.625

.688

.750

.8131.0001.1251.375

Dash No.MS21902

1.063

E(REF)

1.1881.3751.5631.750

1.0631.094

MS21904 - ELBOW

Flareless Tube, 90 o

MS21904D# (Aluminium 2024)MS21904-# (Steel)MS21904J# (CRES Steel 304)MS21904W# (Aluminium 7075)MS21904V#P (CRES Steel, Cad Plated)

TubeO.D.

234568

1012

1/83/161/4

5/163/81/25/83/4

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.7500-16

.8750-141.0625-12

3/413/16

7/815/161-1/321-1/4

1-13/321-9/16

ThreadMIL-S-8879

5/163/8

7/161/2

9/163/47/8

1-1/16

Dash No.MS21904

1/2

5/83/47/8

5/16

TubeO.D.

3/8

EM

THREADMIL-S-8879

WApproximateV

Q+3/64

-0

QW

Thread T

Thread T

V

Q

W

MS21902 - UNIONAlternate: AS5230




5/165/163/81/21/25/83/47/8

MS21907 - ELBOW

Bulkhead Universal45o Flareless TubeMS21907D# (Aluminium 2024)MS21907-# (Steel)MS21907J# (Corrosion Resistant)MS21907W# (Aluminium 7075)MS21907V#P (CRES Steel, Cad Plated)

TubeO.D.

234568

1012

1/83/161/4

5/163/81/25/83/4

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.7500-16

.8750-141.0625-12

1.2811.328

1.5621.8122.0472.250

ThreadMIL-S-8879

M+.047

-0V

.625

.656

.687

.719

.812

.9691.0621.250

Dash No.MS21907

1.453

Q+.047

-0.312.375.437.500.562.750.875

1.062

MS21908 - ELBOW

Bulkhead Universal90o Flareless TubeMS21908D# (Aluminium 2024)MS21908-# (Steel)MS21908J# (CRES Steel 304)MS21908W# (Aluminium 7075)MS21908V#P (CRES Steel, Cad Plated)

TubeO.D.

234568

1012

1/83/161/4

5/163/81/25/83/4

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.7500-16

.8750-141.0625-12

1-5/161-25/64

1-1/21-17/321-11/161-31/32

2-1/42-15/32

ThreadMIL-S-8879

M+3/64

-0V

25/3229/3215/161-1/321-1/161-5/161-1/21-5/8

Dash No.MS21908

Q+3/64

-0W

Approximate

5/163/8

7/161/2

9/163/47/8

1-1/16

M

Q

M

V

AcrossPads

W

THREAD T

90º

Q

VACROSS PADS

W




MS21913 - PLUG

Hex Head, Flareless TubeMS21913D# (Aluminium 2024)MS21913-# (Steel)MS21913J# (CRES Steel 304)MS21913W# (Aluminium 7075)MS21913V#P (CRES Steel, Cad Plated)

TubeO.D.

234568

101216

1/83/161/4

5/163/81/25/83/41

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.7500-16

.8750-141.0625-121.3125-12

3/8

9/165/8

ThreadMIL-S-8879

A+-3/64

-0C

9/1639/6441/6443/6423/3227/3263/641-1/321-1/16

Dash No.MS21913

B

.500

.563

.625

.812

.9681.1251.375

7/16

1/2

11/16

.438

MS21914 - CAP

Pressure Seal,Flareless Tube FittingMS21914-#D (Aluminium 2024)MS21914-# (Steel)MS21914-#J (CRES Steel 304)MS21914-#W (Aluminium 7075)MS21914V#P (CRES Steel, Cad Plated)

TubeO.D.

234568

101216

1/83/161/4

5/163/81/25/83/41

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.7500-16

.8750-141.0625-121.3125-12

ThreadMIL-S-8879

A+.010

CDia.

+.005.600.672.745.845.885.935

1.0621.0821.218

Dash No.MS21914

B(REF)

.720

.767

.893

.977

.9651.0771.2101.2081.189

H+.010

L(REF)

--

.600

.700

.740

.790

.917

.9371.073

.256

.318

.371

.434

.490

.670

.786

.9601.210

.375

.438

.562

.625

.688

.8751.0001.2501.500

B

C

CThread 15º ± 5º Both SidesA

A

C

HL (REF)

Thread

NutMS21921Free toSwivel

Insert

Retainer configurationand size shall beconfined within the hexlimits of the nut

B (REF)




.256

.299

.359

.422

.484

.619

.750

.9381.156

MS21921 - NUT

Sleeve Coupling, FlarelessMS21921-#D (Aluminium 2024)MS21921-# (Steel)MS21921-#J (CRES Steel 304)MS21921-#W (Aluminium 7075)MS21921V#P (CRES Steel, Cad Plated)

234568

101216

1/83/161/4

5/163/81/25/83/41

.3125-24

.3750-24

.4375-20

.5000-20

.5625-18

.7500-16

.8750-141.0625-121.3125-12

ThreadMIL-S-8879

A+.010

C+.005

-000.53.58.72.76.80.86.98

1.001.05

Dash No.MS21921

B+.010

.375

.438

.562

.625

.688

.8751.0001.2501.500

H

.18

.365

.427

.552

.615

.677

.865

.9901.2401.490

.14

.10

.22

.24

.26

MS21922 - SLEEVE

Coupling, FlarelessMS21922-# (Steel)MS21922#C (CRES Steel)

TubeO.D.

-2-3-4-5-6-8

-10-12-16

1/83/161/4

5/163/81/25/83/41

Steel

A+.01

E+.003-.000

.41

.45

.52

.59

.66

.75

.80

.75

.80

Dash No.MS21922 D

G+.004-.000

H

.175

.252

.309

.373

.435

.585

.707

.8361.086

.129

.193

.255

.318

.380

.506

.633

.7581.008

.164

.226

.294

.360

.419

.546

.682

.8171.065

Corrosion Res.2C3C4C5C6C8C

10C12C16C

EDH

G

A

TubeO.D.

H

B

THREAD T

A

90º± 5º

CDIA

20º ± 5º




B

30º ± 5º

THREAD T

90º

E1.063REF

+.031.063

A

- .0.375

+.003-.001

Thread

-1

-2

A+.01 EDash No.

AN6204 B

.375-24

.250-28

.278.190

.188

.43

.734

.531+.000-.005

AN6204Hydraulic Bleeder Valve

MS28889-2Valve, AirHigh Pressure Charging5000 PSI

MS29526-2Cap, PressureFuel ServicingNominal 2.5” Dia.Non-Flush Type

MS20271Universal Joint

NominalSize

MS20271B6MS20271B8

MS20271B10MS20271B12

Part #

2.002.3122.7503.187

NAS516-1ALubrication Fitting1/8 Inch Drive,Flush Type

NAS1564D6-4ReducerFlared Tube

Length

.375

.500

.625

.750

Thread TubeReduction A B C D

Dia.E

Dia.F

Dia.G

Dia.

7/16-20 3/8 - 1/4 .969 .172 .550 .441 .172 .432 .502

Suffix “A” for Steel Alloy, CAD Plated




Part # Tube Size To Fit Thread

Part # To Fit Thread


CAPLUGSCD SERIES

Threaded Plastic Capsfor Flared Fittings

PD SERIES

Threaded Plastic Plugsfor Flared Fittings

ASC SERIES

Aluminium Caps forThreaded Flared Fittings

EC SERIES

Electric-Static-Free Capsfor Threaded Connector

EP SERIES

Electro-Static-Free Plugsfor Threaded Connector

ASP SERIES

Threaded Aluminium Plugsfor 37

o Flared Fittings

PDE SERIES

Threaded Plastic PlugsFor Flareless Tubes andNut Assemblies

ADP SERIES

Threaded Aluminium Plugsfor Flareless Tube andHose Assemblies


Part # To Fit Thread


CD-3CD-4CD-5CD-6CD-8CD-10CD-12CD-16

3/161/4

5/163/81/25/83/41

3/8-247/16-201/2-20

9/16-183/4-167/8-14

1-1/16 -121-5/16 -12

PD-20PD-30PD-40PD-50PD-60PD-80PD-100PD-120

1/83/161/4

5/163/81/25/83/4

5/16-243/8-24

7/16-201/2-20

9/16-183/4-167/8-14

1-1/16 -12

ASC-4ASC-5ASC-6ASC-8ASC-10ASC-12ASC-16

1/45/163/81/25/83/41

7/16-201/2-20

9/16-183/4-167/8-14

1-1/16 -121-5/16 -12

Part # Tube Size To Fit ThreadASP-4ASP-5ASP-6ASP-8ASP-10ASP-12ASP-16

1/45/163/81/25/83/41

7/16-201/2-20

9/16-183/4-167/8-14

1-1/16 -121-5/16 -12

EC-6EC-8EC-10EC-12EC-14EC-16

3/81/25/83/47/81

EP-8EP-10EP-12EP-14EP-16EP-20

1/4-285/8-243/4-207/8-201-20

1-1/4-18

PDE-4PDE-5PDE-6PDE-8PDE-10PDE-12PDE-16

1/45/163/81/25/83/41

7/16-201/2-20

9/16-183/4-167/8-14

1-1/16 -121-5/16 -12

ADP-4ADP-5ADP-6ADP-7ADP-8ADP-10ADP-12

1/45/163/8

7/161/25/83/4

7/16-201/2-20

9/16-185/8-183/4-167/8-14

1-1/16 -12





AN6235Filter Element

1J7-2Airbourne FilterFor Vacuum Systems

Filter replacement element Part # D9-18-1

1J7-1Airbourne FilterFor Vacuum Systems

Filter replacement element Part # D9-18-1

BRACKETTAIR FILTERS

TYPE II - Foam elementon outside of steelscreen cylinder or oval

CCA-1550CCA-1600CCA-1650CCA-3400CCA-4850CCA-7450

CapacityGPM

Part #

1-7/8

4-5/83-7/16

AN6235-1A

AN6235-2AAN6235-3A

A+1/16

-0

B+1/64

DIA

CAND

CDIA

25/6441/6457/64

53/641-1/81-5/8

1/23

6

Packing"O" - RingHydraulicAN6227-7

AN6227-12AN6227-17

Part #BA-3

BA-16BA-104

BA-2205LBA-4106BA-4108

CURTIS DRAIN VALVESQuick Opening for Oil andFuel System

Part # Thread Size1/8” NPT1/4” NPT3/8” NPT

1/2” I.D. Hose1/8” NPT1/8” NPT

CCA-3400 CCA-4850 CCA-7450Material - BrassLength - 1.643”Action - Spiral,

Lock Open

Material - BrassCadmium-PlatedLength - 1.358”Action - Spiral

Lock Open

Material - BrassCadmium-PlatedLength - 1.358”Action - Spiral

Lock Open

CCA-1550 CCA-1600 CCA-1650Material - BrassLength - 1.358”

Action - Push to OpenTurn to Lock Open

Material - BrassLength - 1.690”


Material - BrassLength - 1.920”


BA-5110BA-5110ABA-6108BA-7112

BA-8103-1BA-8110

CONICAL SEALSAP50 & AS4824AP50 & AS4824 Conical seals have the same fit, form and function.

AS4824FittingSize

AP50Nickel Copper Nickel Copper

-4-5-6-8

-10

AP50N04AP50N05AP50N06AP50N08AP50N10

AP50C04AP50C05AP50C06AP50C08AP50C10

AS4824N04AS4824N05AS4824N06AS4824N08AS4824N10

AS4824C04AS4824C05AS4824C06AS4824C08AS4824C10




AS15001-4PAS15001-1P

GREASE FITTINGSAS15001P, AS15002PAS15003P, AS15006P

AS15001-2P AS15001-3P

AS15003-1P AS15006-1PAS15002-1P AS15002-3P

MS51523B4

Tee, Tube to Swivelon Run, 37º Flared

Thread Tube O.D. Length

7/16 - 20 1/4 1.890

GC-5 - CAPLUG

Grease cap with retaining collar.Securely snaps over fittings toseal out dirt and moisure

A Dia.

0.234 0.47

B Dia.

AAE-HELI-R#

P/N: AAE-HELI-RS1 (Solar / Electric)P/N: AAE-HELI-R1 (Electric)

Hybrid power - solar / electricEco friendly plywood constructionFlat-packed and ready to build,no glue necessary & battery is included!

Refer to website for current version

Length Width Height

8.0 3.5 3.5

Rotor Dia. Power

AAA Batt. / Sun 10 / 10

Fun Factor

7.0

‘Redge’




B C

306-2

306-3

306-4

306-6

306-8

306-10

.125

.188

.250

.375

.500

.625

.344

.406

.469

.594

.750

.875

300

250

200

150

150

150

.88

1.00

1.04

1.15

1.37

1.57

.40

.44

.47

.54

.67

.72

.34

.32

.35

.38

.43

.51

471-2D

471-3D

471-4D

471-6D

471-8D

471-10D

A

Hose Straight Hose Fitting

Part # Part # MaxA

MaxB

MaxC

InsideDia.

OutsideDia.

Nom.P.S.I.

471, MS27404 STRAIGHT HOSE FITTING

AEROQUIP 306 LOW PRESSURE HOSE & FITTINGS

306 HOSE CONSTRUCTION (MIL-H-5593):

OPERATING TEMP: -65°F to +160°F

APPLICATION:

IDENTIFICATION: Black cover, a yellow indicator stripe with symbol “LP”, manufacturer’s code, size, anddate of manufacture (quarter year/year). 180° from this is “Aeroquip 306” in a whitestripe. All markings are spaced 6 inches apart.

Air or vacuum instrument systems, automatic pilots & lines to pressure guages used with these systems (specified in MS33620).

Inner tube is made of a seamless synthetic rubber compound reinforced by a single cottonbraid. Outer cover is also synthetic rubber compound.

®

B C

5/16-24

3/8-24

7/16-20

9/16-18

3/4-16

Thread

7/8-14





Part # Part # MaxA

MaxB

MaxC

InsideDia.

OutsideDia.

Nom.P.S.I.

491, 451, MS24587 STRAIGHT HOSE FITTING

AEROQUIP 303 MEDIUM PRESSURE HOSE & FITTINGS

303 HOSE CONSTRUCTION (MIL-H-8794):


APPLICATION:

IDENTIFICATION:

303-3

303-4

303-5

303-6303-8

303-10

303-12

.453

.516

.578

.672

.766

.922

1.078

3,000

3,000

3,000

2,0002,000

1,750

1,500

491-3

491-4

491-5

491-6491-8D

491-10D

491-12D

1.43

1.51

1.64

1.792.22

2.42

2.70

.65

.65

.74

.77

.94

1.0

1.0

.32

.35

.38

.38

.43

.51

.57

B

.125

.188

.250

.313

.406

.500

.625

A

C

Inner tube is made of a seamless synthetic rubber compound reinforced by asynthetic-impregnated single wire braid over a single cotton braid. Outer cover issynthetic impregnated oil-resistant braid.

Medium pressure hydraulic, pneumatic, fuel, oil and coolant systems (specified in MS33620).

Grey-black braided cover, a yellow marking with symbol “MIL-H-8794”, size, date of manufacture (quarter year/year) and hose manufacturer’s code. 90° from this is a yellow indicator stripe with “Aeroquip 303”. All markings are spaced 9 inches apart.

®

Thread

5/16-24

3/8-24

7/16-20

9/16-183/4-16

7/8-14

1-1/16-12

Angled fittings also available. Base Part #: 980005, 980006, 980136, 980137




AEROQUIP FIRE SLEEVE

AeroquipPart #

AE102-8AE102-9AE102-10AE102-11AE102-12AE102-13AE102-14AE102-16AE102-18AE102-20

Specially developed to meet the fire resistance requirements ofFAATSO-C53 or TSO-C75. Uniform layer of fibreglass tubing impregnatedand overlaid with a flame resistant silicone rubber. The silicone rubber will not soften, peel, blister or harden after contact with MIL-H-5606, distilled water, MIL-L-7808, MIL-L-6082, or Skydrol 500.

-65°F to +500°F

Outer surface is orange in color, with a simple black layline consisting of “Aeroquip AE102/624-size-code” every 10 inches.

Can be used for all fuel, oil, hydraulic, fire extinguisher and propeller feathering lines. Use 900591B Clamps to secure firesleeve material.

1/29/165/8

11/163/4

13/167/81

1-1/81-1/4

900591B-1C900591B-2C900591B-2C900591B-2C900591B-2C900591B-2C900591B-2C900591B-3C900591B-3C900591B-3C

InsideDia.

Use withClamp*

Use w/ Hose303*

Use w/ Hose601*

-3-4-5----6----8-10-12---

-4-5-6----8-------10-12---

Use w/ HoseAE246*

-4-------6----8

-10-12------

Use w/ Hose666*

Weightlbs. per ft

.112

.122

.142

.158

.166

.175

.187

.195

.226

.248

-5-6-8----10---

-12---------

Use w/ HoseMIL-H-6000*

---1/4---

3/81/2---5/83/4------

BAND-IT CLAMPS

Use with Aeroquip Firesleeve

900591B-1C900591B-2C900591B-3C

AeroquipPart #

Band-ItPart #JS242JS252JS253

AERODUCT DUCTINGSCAT - One ply silicone rubber impregnation with

SCEET - Two ply silicone rubber impregnation withhelical copper-coated wire inside with wire between plies from -80° F to +500° F. (Red). Available in 11 ft. lengths.

Inside Diameter SCAT Part # SCEET Part #3/4”1”

1-1/4”1-1/2”1-3/4”

2”2-1/2”

3”

SCAT-3SCAT-4SCAT-5SCAT-6SCAT-7SCAT-8SCAT-10SCAT-12

SCEET-3SCEET-4SCEET-5SCEET-6SCEET-7SCEET-8SCEET-10SCEET-12

®

helical copper-coated high carbon steel wire inside from -80° F to +500° F. (Red). Available in 11 ft. lengths.

AE102-6 3/8 900591B-1C --- --- --- .096-4---AE102-7 7/16 900591B-1C --- -3 --- .104------

AE102 - FIRESLEEVE

OPERATING TEMP: APPLICATION:

IDENTIFICATION:

*Clamp and hose part numbers are suggestions only and suitability may vary depending on application.




601-3

601-4

601-6

601-8

601-10

601-12

.141

.204

.329

.415

.539

.665

.398

.462

.571

.673

.820

.961

1500

1500

1500

1250

1250

1250

1.30

1.33

1.51

1.79

1.94

2.01

.64

.65

.76

.94

.99

1.00

.34

.37

.38

.43

.50

.57

816-3

816-4

816-6D

816-8D

816-10D

816-12D


Part # Part # MaxA

MaxB

MaxC

InsideDia.

OutsideDia.

Nom.P.S.I.

816, M83798/1 STRAIGHT HOSE FITTING

AEROQUIP 601 / AE701 HOSE & FITTINGS

601 / AE701 HOSE CONSTRUCTION (MIL-H-83797):


APPLICATION:

IDENTIFICATION:

Fuel, engine oil, coolants. The hose retains its flexibility over a long period and has unlimited shelf life. Not intended for vacuum applications.

Inner tube is made from seamless elastomeric chlorinated polyethylene (CPE). The synthetic rubber inner tube has two layers of stainless steel wire braid reinforcement.

®

3/8-24

7/16-20

9/16-18

3/4-16

7/8-14

Thread

1-1/16-12

Basic HoseP/N: 601 / AE701

+ Braided ChafeguardP/N: AE501

+ Integral Fire SleeveP/N: AE401

Angled fittings also available. Part #: 8846-##, 8891-##

Thread




MIL-DTL-6000 OIL AND COOLANT HOSE

MIL-DTL-6000D-1/4MIL-DTL-6000D-3/8MIL-DTL-6000D-1/2MIL-DTL-6000D-5/8MIL-DTL-6000D-3/4MIL-DTL-6000D-1

.250

.375

.500

.625

.7501.0

.585

.713

.840

.9651.091.34

250250250250250250

Part # InsideDiameter

OutsideDiameter

OperatingP.S.I.

TubeSize1/43/81/25/83/41

ProofP.S.I.

BurstP.S.I.

500500500500500500

100010001000100010001000

Construction: Inner tube is made of a seamless synthetic rubber compound reinforced by high strength mildew resistant yarn. Outer cover consists of a polychloroprene rubber reinforced and compounded.

Operating Temp: -40°F to +250°FApplication: Designed to handle the effects of oil, alcohol, coolant, and water.

Lightweight and flexibility make MIL-DTL-6000 great for use on the hard-to-reach spots in tight engine compartments.

Identification: Black cover, shall have a red stripe consisting of the (CAGE) code and a whitestripe consisting of the size, cure date in quarter and year, and specification.

Australian Aerospace Hose Shop

High Pressure PTFE (TeflonTM) Hose (AE246) - 3000 PSI

Medium Pressure PTFE (TeflonTM) Hose (666, 667, AE240) - 1500 PSI

Medium Pressure Rubber Hose (303, 302A) - 350 PSI to 3000 PSI

Low Pressure Rubber Hose (306) - 150 PSI to 300 PSI

Synthetic Rubber Hose (601 / AE701) wire reinforced - 200 PSI to 1000 PSI

Protective Sleeving

FAA 8130 Release Certificates available for our hose assemblies

Hose Shop Capability Overview

AAE is an Eaton Authorised Distributor and isworking to establish a TSO approved aerospace hose shop in Australia, supplying the Aeroquip® product line of hose products and assemblies.

This sovereign capability will directly supportAustralian Defence and commercial industry acrossa broad range of aerospace platforms.

www.austerospace.com.au [email protected]




0 - 0.5

0 - 1.0

No-Load RotationalBreakaway TorqueOscillating

Load (lbs) "K" TypeStandardAxialRadial

Static LimitLoad (lbs) WT.

Lb. Max(Ref)

-3

-4

-5A

-6

MS14101

Bearing, Self-Lubricating,Self-Aligning, Narrow,Grooved, Outer Ring

MS14101

.1900

.2500

.3125

.3750

.5625

.6562

.7500

.8125

.293

.364

.419

.475

.218

.250

.281

.312

B+.0000-.0005

D+.0000-.0005

H+.005

MMIN

P+.000-.015

QMIN

W+.000-.002

E+.000-.010

10

9

.025

.035

.281

.343

.375

.406

.500

.594

.660

.702

0.25 - 5.0

0.25 - 8.0

39756040

8750

10540

150

430

700

1100

1500

3320

5460

6600

.020

.030

.040

0 - 0.5

0 - 1.0




Lb. Max(Ref)

-4

-5

-6

MS14102

Bearing, Self-Lubricating,Self-Aligning, Narrow,Chamfered, Outer Ring

MS14102

.2500

.3125

.3750

.6250

.6875

.8125

.300

.360.46

.327

.317

.406

B+.0000-.0005

D+.0000-.0005

H+.005

MMIN

QMIN

W+.000-.002

.437

.437

.500

0.25 - 5.0

0.25 - 8.0

55009400

13700

17701640

2630

4900

6050

8310

.031

.035

.060

15

148

0 - 0.5

0 - 1.0



Static LimitLoad (lbs)

WT.Lb. Max

(Ref)

-4

-5-6

-10

MS14103

Bearing, Self-Lubricating,Self-Aligning, Wide,Grooved Outer Ring

MS14103

.2500

.3125

.3750

.6250

.6250

.6875

.8125

1.1875

.300

.360

.466

.747

.327

.317.406

.567

B+.0000-.0005

D+.0000-.0005

H+.005

MMIN

P+.000-.015

QMIN

W+.000-.002

E+.000-.010

.025

.035

.437.563

.625

.7121.087

0.25 - 5.0

0.25 - 8.0

5500

9400

1370029000

1770

1640

26306130

4900

6050

831020250

.031

.035

.060

.160.500.750

15

14

812




0 - 0.5

0 - 1.0




Lb. Max(Ref)

-3

-4

-5-6

MS14104

Bearing, Self-Lubricating,Self-Aligning, Narrow,Chamfered Outer Ring

MS14104

.1900

.2500

.3125

.3750

.5625

.6562

.7500

.8125

.293

.364

.419

.475

.218

.250

.271

.312

B+.0000-.0005

D+.0000-.0005

H+.005

MMIN

QMIN

W+.000-.002

.281

.343

.375

.406

0.25 - 5.0

0.25 - 8.0

3975

6040

875010540

150

430

7001100

1500

3320

54606600

.020

.020

.030

.040

10

10

109

-2-4-6-7-8-9

MS21151 A+ .031

BoreSize

Nom.

B+ .0000- .0003

C+ .031

D+ .010

MS21151

Bearing, Double RowRod End External ThreadSelf-Aligning, Anti Friction"C" After Dash #Indicates Key Slot

ENom.

RadiusH

+ .010ThreadUNJF-31

OMin.Dia.

N+ .015_ .000

W+ .000_ .005

#10#10#10#101/41/4

1.3751.3751.8121.5631.8751.875

.1900

.1900

.1900

.1900

.2500

.2500

.750

.750

.9381.00

1.1251.125

.781

.781

.781

.781

.938

.938

.422

.390

.562

.344

.469

.469

.328

.328

.438

.328

.438

.438

.005

.005

.005

.005

.005

.005

.276

.276

.307

.276

.340

.340

.1900-32RH

.3750-24RH

.2500-28RH

.2500-28RH

.3750-24RH.3750-24LH

.437

.437

.500

.437

.593

.593

MS21153

Bearing, Double RowInternal ThreadSelf-Aligning, Anti Friction"C" After Dash #Indicates Locking Slot

-1-3

-5

-6-7

MS21153A

+ .031BoreSize

Nom.

B+ .0000- .0003

C+ .031

D+ .010

ENom.

Radius

H+ .010

ThreadUNJF-31

OMin.Dia.

N+ .015_ .000

W+ .000_ .005

#10#10

#10

1/41/4

1.3751.375

1.375

1.4691.469

.1900

.1900

.1900

2500.2500

.750

.750

.750

.750

.750

.781

.781

.781

.938

.938

.390

.390

.390

.468

.468

.328

.328

.328

.436

.436

.005

.005

.005

.005

.005

.276

.276

.276

.340

.340

.2500-28RH

.2500-28RH

.2500-28LH

.3125-24RH

.3125-24LH

.437

.500

.437

.593

.593

KBead orHex Dia.

JDia.+ .010

.375

.375

.375

.436

.436

Bead .438Bead .438

Bead .438

Hex .438Hex .438




MS27640

Airframe BearingAntifriction, Heavy Duty

MS27641

Airframe BearingAntifriction Intermediate Duty

BBORE(b)

+.0000-.0005

-3A

-4-5

-6

WWIDTHINNER

RING (a)+.000-.005

KP3LKP4KP5

KP6

MSDash #

MS27640

MFG.P/N

.1900

.2500

.3125

.3750

.6250

.90141.2500

1.4375

.245

.484

.558

.620

.203

.335

.375

.469

.280

.390

.469

.591

HWIDTHOUTERRING (a)

+.000-.005

A

SHOULDERDIAMETER

INNERAPPROX

EINNER

RING BORECHAMFER

+.015-.000

RADIALLIMITLOAD

RATINGLBS CASE II

COUTER

(c) RING ODCHAMFER

+.015-.000

RADIAL LOADRATING (LBS)

FOR AVERAGE LIFE OF 10,000COMPLETE 90° CYCLES

.005

.015

.010

.032

188026805620

7910

90012002500

3500

DOUTSIDE

DIAMETER(a) (b)+.0000-.0005

THRUSTLIMITLOAD

RATINGLBS CASE I

145020303970

5410

170024104900

6540

BBORE

+.0000-.0005

-3

-4-5-6

-8-10

WWIDTHINNERRING+.000-.005

KP3A

KP4AKP5AKP6A

KP8AKP10A

MSDash #

MS27641

MFG.P/N

.1900

.2500

.3125

.3750

.5000

.6250

.6250

.7500

.8125

.8750

1.1251.375

.297

.281

.297

.313

.375

.406

.297

.380

.415

.495

.616

.768

HWIDTHOUTERRING+.000-.005

ASHOULDERDIAMETER

INNERAPPROX

EINNER

RING BORECHAMFER

+.015-.000

RADIALLIMITLOAD

RATINGLBS CASE II

COUTER

(c) RING ODCHAMFER

+.015-.000


FOR AVERAGE LIFE OF 10,000COMPLETE 90° CYCLES (e)

.005

.005

.015

.015

.015

.015

1560

188021902500

39106700

700

90010001100

17003000

DOUTSIDE

DIAMETER+.0000-.0005

THRUSTLIMITLOAD

RATINGLBS CASE I

1250

145016001710

25504360

1500

169018201920

28704980

.234

.219

.234

.250

.313

.344

.016

.016

.016

.016

.016

.032

MS27643

Airframe BearingAntifriction, Self-AligningLight and Heavy Duty

AXIALPLAYINCHMAX

BBORE

+.0000-.0005

-3

-4

-5


DSP3

DSP4

DSP5

MSDash #

MS27643

MFG.P/N

.1900

.2500

.3125

.7774

.9014

1.250

.500

.687

.812

.304

.430

.515


ASHOULDERDIAMETER

INNERAPPROX

EINNER

RING BORECHAMFER

+.015-.000

RADIALLIMITLOAD

RATINGLBS CASE II

COUTER

(c) RING ODCHAMFER

+.015-.000



.005

.005

.015

1420

1780

3740

200

300

600

DOUTSIDE


THRUSTLIMITLOAD

RATINGLBS CASE I

1220

1600

3300

1420

1780

3740

.392

.454

.656

.022

.032

.032

.0055

.0055

.0060




MS27645


AXIALPLAYINCHMAX

BBORE

+.0000-.0005

-3A-4A-5A-6A-3-4-5-6

WWIDTHINNERRING

+.000-.005

KSP3LKSP4AKSP5AKSP6AKSP3KSP4KSP5KSP6

MSDash #

MS27645

MFG.P/N

.1900

.2500

.3125

.3750

.1900

.2500

.3125

.3750

.6250

.7500

.8125

.8750

.7774

.90141.2501.438

.245

.281

.297

.313

.297

.484

.558

.620

.253

.321

.381

.453

.290

.390

.561

.607

HWIDTHOUTER

RING+.000-.005

ASHOULDERDIAMETER

INNERAPPROX

EINNER

RING BORECHAMFER

+.015-.000

RADIALLIMITLOAD

RATINGLBS CASE II

COUTER

(c) RING ODCHAMFER

+.015-.000



.005

.005

.015

.016

.005

.005

.015

.015

550900

10001120900

141021902980

100200200200200300300400

DOUTSIDE


THRUSTLIMITLOAD

RATINGLBS CASE I

480770815990770123018902580

5509009501120900123021902980

.303

..219

..234

.250

.270

.335

.375

.469

.016

.016

.016

.016

.022

.032

.032

.032

.023

.025

.028

.030

.023

.025

.028

.030

MS27646

Airframe BearingAntifriction, Extra Light Duty

BBORE

+.0000-.0005

-38-39

-41


MSDash #

MS27646

.6250

.7500

1.0625

1.0651.1875

1.5000

.281

.281

.281


ASHOULDERDIAMETER

INNERAPPROX

RADIALLIMITLOAD

RATINGLBS CASE II



DOUTSIDE


THRUSTLIMITLOAD

RATINGLBS CASE I

.250.250

.250

.777

.895

1.216

32803750

5000

15001700

2200

18201900

2020

19902050

2170

.015

.015

.015

E AND CCORNER CHAMFER

x 45°(c) (b)

+.020-.000

MS27647


BBORE

+.0000-.0005

-4A-4-5-6-8

WWIDTHINNERRING

+.000-.005

MSDash #

MS27647

.2500

.2500

.3125

.3750

.5000

.6250

.7500

.87501.0631.438

.562

.875

.9381.1881.500

.338

.372

.466

.570

.709

HWIDTHOUTERRING

+.000-.005

ASHOULDERDIAMETER

INNERAPPROX

EINNER

RING BORECHAMFER

+.015-.000

RADIALLIMITLOAD

RATINGLBS CASE II

COUTER

(c) RING ODCHAMFER

+.015-.000



.005

.005

.005

.005

.005

1400270051408440

15520

500900

160026004700

DOUTSIDE


THRUSTLIMITLOAD

RATINGLBS CASE I

9601850232037406520

10502070260042207610

.500

.750

.8131.0631.375

.016

.016

.016

.016

.032

Without lubrication groove With lubrication groove




37-10-051-2037-10-061-20Black Rubber HandleKeeper and Bracket 302 Stainless SteelRivet 5056 Aluminium37-10-061-10Black Rubber HandleKeeper and Bracket 1010 Steel, Zinc PlateChromate Plus Sealer

SOUTHCO LATCHES

KM610 SERIESLatch Mounts Flush with PanelFinger Touch Release For Easy OpeningSlam Close to LockFlush Mount for Panel Thickness.032, .051 and .064 InchesKM610-32, KM610-51, KM610-64

CAMLOC LATCHES

Length Height BracketWidth

11/163/4

2-1/162-11/16

9/16

45/64

Dash #

-051--061-

TL800ASteel, Zinc Plated with Yellow FinishWorking Strength 300 Lbs.

TL800ASSStainless SteelWorking Strength 300 Lbs.

TL800GSteel, Zinc Plated with Yellow FinishWorking Strength 100 Lbs.

TL800GSSStainless SteelWorking Strength 100 Lbs.

TL803BSteel, Zinc Plated with Yellow FinishWorking Strength 45 Lbs.

TL803BSSStainless SteelWorking Strength 45 Lbs.

TL800-7Steel, Zinc Plated with Yellow FinishStrike

TL800-7SSStainless Steel Strike

DZUS LATCHES

®

®

®




MS20219-1MS20219-2MS20219-3MS20219-4MS20220-1MS20220-2MS20220-3MS20220-4MS24566-1BMS24566-2BMS24566-3BMS24566-4BMS24566-5B

1/16, 3/321/16, 3/321/16, 3/321/16, 3/32

1/8, 5/32, 3/161/8, 5/32, 3/161/8, 5/32, 3/161/8, 5/32, 3/161/16, 5/64, 3/321/16, 5/64, 3/321/8, 5/32, 3/161/8, 5/32, 3/16

3/16, 1/4

1.3121.7501.7502.6251.7503.0004.2505.5001.2502.5002.0003.5005.000

ADia.

CDia.

EDia.

Allowable LoadLimit (Lbs.)

1.0001.4381.4382.3121.2552.5003.7505.000.972

2.2221.5103.0104.374

.373

.423

.769

.423

.465

.474

.474

.474

.297

.332

.390

.390

.591

.2500

.2500

.6250

.2500

.3125

.3125

.3125

.3125

.1900

.1900

.2500

.2500

.3750

.438

.438

.438

.438

.625

.625

.625

.625

.297

.297

.484

.484

.625

48048048092050016802500250018550045012002000

Pulley Cable Size

MS20001Hinge,StructuralExtruded6 Ft. Length

MS20257Hinge, Continuous(P) Anodised Aluminium(C) Corrosion Resistant6 Ft. Length

MS20001A

WIDTHTHICKNESS

MAX MINMAX MIN-2-7200-3-7200-4-7200-5-7200-6-7200

1.0621.2501.5001.7502.000

.056 .044

.630

.724

.850

.9751.102

.612

.706

.830

.9551.078

MS20257CRES

AWIDTH(OPEN) AL ALLOY

THICKNESSCRESALUMINIUM

-1-7200-2-7200-3-7200-4-7200-5-7200-6-7200

P1-7200P2-7200P3-7200P4-7200P5-7200P6-7200

C1-7200C2-7200C3-7200C4-7200C5-7200C6-7200

.7501.0621.2501.5002.0002.000

.032

.040

.051

.064

.031

.037

.050

.062

MS20253Hinge Pin, 6 ft.Passivated

MS20253PHinge Pin, 6 ft.Cad Plated

.062

.089

.117

.179

.129

1-72002-72003-72004-72005-7200

Diameter MS20253-.062.089.117.179.129

P1-7200P2-7200P3-7200P4-7200P5-7200

Diameter MS20253

AIRCRAFT PULLEYSMS20219 - Secondary Control PulleyMS20220 - Flight Control PulleyMS24566 - Anti-friction Bearing, Control Pulley (AN210)

A2G

G

DDia.

BDia.

NOTE: Hinge shipments are considered oversize shipments that incur additional freight charges.




MS20667 Cable Dia.Length

AN155Dash #

MS21251Dash #

Length(In.)Thread Dia.

-8S-8L-16S-16L-32S-32L-46S-46L

-B2S-B2L-B3S-B3L-B5S-B5L-B6S-B6L

6-40

1/4-28

.250

.344

.438

10-32

2.2504

2.2504

2.2504

2.2504

5/16-24 .500

MS21251(AN155)Turnbuckle Barrel

MS20668(AN668)Eye End

MS20667(AN667)Fork End

MS21260(AN669)Stud Terminal,Long Wire Rope

MS20663CBall and Double Shank

COMPLETETURNBUCKLEASSEMBLIES

MS21260(AN669)Turnbuckle End Short

CableDia.1/163/321/8

5/323/16

Thread

6-4010-321/4-281/4-285/16-24

Length

3.673.864.284.664.78

MS21260

-L2RH-L3RH-L4RH-L5RH-L6RH

-L2LH-L3LH-L4LH-L5LH-L6LH

Left RightCable

Dia.1/163/321/85/323/16

Thread

6-4010-321/4-281/4-28

5/16-24

Length

2.792.983.403.783.90

MS21260

-S2RH-S3RH-S4RH-S5RH-S6RH

-S2LH-S3LH-S4LH-S5LH-S6LH

Left Right

MS20663

480920

2,0002,8004,200

C2C3C4C5C6

Hole Size

.073.104.139.169.201

Cable Dia.

1/163/321/85/323/16

1.5721.9452.3522.6553.071

-2-3-4-5-6

Pin HoleDia..190.190.190.250.313

1/163/321/85/323/16

MS20664

480920

2,0002,8004,200

C2C3C4C5C6

Hole Size

.073.104.139.169.201

Cable Dia.

1/163/321/85/323/16

Min. BreakingStrength (Lbs.)

-2-3-4-5-6

Pin HoleDia..190.190.190.250.313

Cable Dia.

1/163/321/85/323/16

Length

1.802.162.603.003.19

MS20668

MS20664CBall and ShankCable End

Min. BreakingStrength (Lbs.)




MS21252(AN161)Turnbuckle Fork

MS21254(AN165)Pin Eye1st letter following dash # indicates right or left.

MS21255(AN170)Cable Eye1st letter following dash # indicates right or left.Last letter indicates short (S) or long (L).

MS21259

Stud End

MS21252 AN161 Length Cable Dia. G DThread-2RS-2LS-3RS-3LS-4RS-4LS-5RS-5LS

-8RS-8LS-16RS-16LS-22RS-22LS-32RS-32LS

1.5001.5001.6251.6251.8441.8441.8441.844

1/16 .109 .190

.2501/8 or 5/32 .218

1/8 .195

6 - 40

1/4 - 28

.190651.23/310 - 32

.1901/4 - 28

MS21254 AN165 Length Cable Dia. J DThread-2RS-2LS-3RS-3LS-5RS-5LS

-8RS-8LS-16RS-16LS-32RS-32LS

1.500 1.500 1.625 1.625 1.750 1.750

6 - 40 1/16 .125 .190

.188 .1903/3210 - 32

5/32 .2191/4 - 28 .250

MS21255 AN170 Length Cable Dia. J DThread Size-2RS-2LS-3RS-3LS-5RS-5LS

-8RS-8LS-16RS-16LS-32RS-32LS

1.5001.5001.6251.6251.7501.750

6 - 40 1/16 .125 .188

.188 .2193/3210 - 32

1/4 - 28 5/32 .219 .281

MS21259RH Thread

MS21259LH Thread

-2RH-3RH-4RH-5RH-6RH

-2LH-3LH-4LH-5LH-6LH

Cable Dia.

1/163/321/85/323/16

Thread Size

6 - 4010 - 321/4 - 281/4 - 28

5/16 - 24

2.65 3.00 3.59 3.79

4.002

Length

Last letter indicates short (S) or long (L).

Last letter indicates short (S) or long (L).1st letter following dash # indicates right or left.




Part # Alt. Part # LengthAA55487-2AA55487-3AA55488-1AA55488-2

AN415-2AN415-3AN416-1AN416-2

1-15/161-9/321-1/16

3/4

.080

.0295

.051

.041

Wire Dia.AN415 AN416

AA55487 / AA55488(AN415 / AN416)

Locking Pins

MS21256

Locking ClipStainless Steel

AN100

Cable Thimble

NICOPRESS SLEEVEMS51844

18- Unplated Copper28 - Plated Copper

To FitCable Dia.

Unplated Plated

1/163/321/85/32

1/16 DIA.3/32 DIA.1/8 DIA.

5/32 DIA.

48092017002400

CONTROL CABLEPer MIL-W83420

1/16 DIA.3/32 DIA.

7 X 7 Cable

7 X 19 Cable

S/S Max. Load (Lbs.)

S/S Max. Load (Lbs.)

480920

MS21256 Length-1-2-3

1.0781.9552.015

To FitCable Dia. Part #

Steel StainlessPart #

1/16 - 5/643/32 - 1/8

5/323/16

AN100C3AN100C4AN100C5AN100C6

MS51844 Alt. Part #-22-23-24-25

28-1-C28-2-G28-3-M28-4-P

MS51844 Alt. Part #-42-43-44-45

18-1-C18-2-G18-3-M18-4-P

NAS559

Lock Rod-End

NAS559 Thread O.D. A B-1-2-3

1/4 & 5/163/8

7/16 & 1/2

.036

.036

.049

.250

.281

.344

A

B

Close-up view of 7x7 cable Close-up view of 7x19 cable

AN100-3AN100-4AN100-5AN100-6

®

AA55488-3 AN416-3 .080 2.15

Part # Stainless Part # Gal.7X7 1/16 S/S 7X7 1/16 GAL7X7 3/32 S/S 7X7 3/32 GAL

7X19 1/16 S/S7X19 3/32 S/S

7X19 1/16 GAL7X19 3/32 GAL

7X19 1/8 S/S7X19 5/32 S/S

7X19 1/8 GAL7X19 5/32 GAL

Part # Stainless Part # Gal.




AN115Shackle

NAS427Pulley Guard Pin

NAS427K-6-9-10-11-12-13-14-16

LengthNAS427KLength.38.56.62.69.75.81.881.00

MS27975Clevis Rod End

AN665Clevis TypeTie Rod

AN490HTRod EndThreaded

MS20995Safety Wire

-18-20-21-24-26-34-42-46

1.121.251.311.501.622.122.622.88

MS27975

-1-2-3-4

HoleDia.Type Fork

.250

.250

.188

.188

WIDENARROW

WIDENARROW

UltimateAxial Load

3800 lbs.2850 lbs.4700 lbs.3500 lbs.

Part #

AN490HT6PAN490HT8P

DiameterThread

.375

.5001/4-28 3/8

1/2

TubeSize

AN665

-21R-34R-46R

DDia.

ThreadSize

.190

.250

.313

10 - 321/4 - 285/16 - 24

BLength

1.5371.8131.875

AN115

-8-16-21-32

Strength(Lbs.)

ADia..188.188.188.250

800160021003200

MS20995 MS20995MS20995N20N21N25N32N40N41

CU20CU21CU25CU32CU40CU41

C20C21C25C32C40C41

.020

.021

.025

.032

.040

.041

Wire Dia.Corrosion

Resistant (C) Copper (CU) Nickel-CopperAlloy (N)

MDia.1/41/41/43/8

M

AD

N

B

H

J

NAS1756-24Warning Streamer

N




CORNER NUT PLATE(Miniature)

AIT518-SA .112 .203AIT518-SB .139 .218AIT518-SC .164 .234AIT518-SD .191 .250

ONE LUG NUT PLATE

Bolt Ref.Part #

AIT518G .139AIT518H .164AIT518J .191AIT518K .248

STRAP DUPLICATORS - LENGTH 6 - 1/4"

ONE LUG NUT PLATE(Miniature)

AIT518-PAAIT518-PBAIT518-PCAIT518-PDAIT518-PE

BUSHING TYPE

Part # SizeTPMM250-1 #40TPMM250-2 #30TPMM250-3 #21TPMM250-5 #10TPMM250-7 #F

NUT PLATE / ANCHOR NUT DRILL JIGS

PRECISION DRILL GAUGE

TP565AFractional size gauge 1/16" to 1/2" in 64ths.

TP565BDrill & tap gauge #1 to #60, including table for tapsize, tap drill & body drill for machine screws from2-56 to 1/4"-28.TP565CLetter A-Z size gauge

INVERTED TYPE

Part # SizeTPMM255-1 #40TPMM255-2 #30TPMM255-3 #21TPMM255-5 #10TPMM255-7 #F

PUNCH TYPE

Part # SizeTPMM260-1 #40TPMM260-2 #30TPMM260-3 #21TPMM260-5 #10

TWO LUG NUT PLATE(Miniature)

TWO LUG NUT PLATE

Part #

AIT518A .139 .344 .688AIT518B .164 .344 .688AIT518C .191 .344 .688AIT518D .248 .500 1.000

CORNER NUT PLATE

AIT518S #8 .344 .164AIT518T #10 .344 .191AIT518U 1/4" .500 .248AIT518V* 5/16" .500 .372

Drill size #40*Drill size #30

AIT518-NA .112 .203 .406AIT518-NB .139 .218 .436AIT518-NC .164 .234 .468AIT518-ND .191 .250 .500AIT518-NE .248 .281 .562

TPA5610

TPA5611TPA5612

9

136

1/4" to 3/4"

1/8" to 1/2"

3/16" to 1/2"

3/8”1/4”

1/4”

Number ofHole Sizes

HoleSizes

ShankSizePart #

UNIBIT® DRILLHigh Speed Steel, 1/4" ShankDrills through metal and plasticAutomatically de-burrs drilled hole

StepDepth1/16"

1/32"1/16"

APilot Dia. Pilot Dia. A B Part # Bolt Ref. A C

Drill size #40 Drill size #40

Part # Pilot Dia. A B

Drill size #40

#6#8#101/4”

.344.344.344.344

Drill size #40Bolt Ref.Part # APilot Dia.

#6#8

#101/4”

#4.122.139.164.191.248

.203

.218.234.250.281

Drill size #40

Part # Bolt Ref.APilot Dia.

#6#8

#10

#4




CLECO FASTENERS

STANDARD SIDE CLAMP

C-3/32C-1/8

C-5/32C-3/16

ZINCCOPPER

BLACKBRASS

3/321/8

5/323/16

#40#30

#21#10

Color Code Diameter Drill SizeCSG 1/2 x 1/2CSG 3/4 x 1/2CSG 1/2 x 1CSG 3/4 x 1

1/23/41/23/4

1/21/211

2-3/162-7/162-3/162-7/16

Gap Reach LengthPart # Part #

INSERT BITS - TRI-WING

Part# Part#Point Size1/4" Hex Shank, Overall Length 2-3/8"1/4" Hex Insert, Overall Length 1-1/4"

Point Size Point SizeTW-2TW-3TW-4TW-5

#4#6#8#10

#4#6#8#10

#4#6#8#10

TW-2-2 3/8TW-3-2 3/8TW-4-2 3/8TW-5-2 3/8

POWER BIT

Part#1/4" Hex Insert, Overall Length 1"

TWD-2TWD-3TWD-4TWD-5

INSERT BITS - PHILLIPS / TORQ-SETTORQ-SET

1/4" Hex Shank, Overall Length 1" 1/4" Power Bit

440-#

1/4" Hex Insert,Limited Clearance

446-#

1/4" Hex Insert

491X492X493X

491AX492AX493AX

Part# Point Size123123

Length1-15/161-15/161-15/16

2-1/22-1/22-1/2

Part#Point Size23468

10

446-1X

446-2X

446-3X

Part#1

2

3

Point SizePart#

1

2

3

Point Size

440-1X

440-2X

440-3X

212-2212-3212-4212-6212-8

212-10

AIRCRAFT DRILL BITSPer NAS907 Specifications135° Split Point

COBALT

Size

Size

Size

Size3/321/85/323/161/4

Extension Bits6" Overall Length

#10#16#20#21#27#30#40

3/321/85/323/161/4

HIGH SPEED STEEL

Jobber Length

Part #

Part #

01-010HSS

02-063HSS02-065HSS02-067HSS02-069HSS02-073HSS

Jobber Length

Drill bit manufacturer's part number may vary

#10#16#20#21#27#30#40

Part #

Part #

Part #

Part #

01-01001-01601-02001-02101-02701-03001-040

02-06302-06502-06702-06902-073

05-20905-21505-21905-22005-22605-22905-239

04-10204-10404-10604-10804-112

®

®

01-016HSS01-020HSS01-021HSS01-027HSS01-030HSS01-040HSS

C-27 GREEN #27 #27

Size

Size

#10#16#20#21#27#30#40

3/321/85/323/161/4

THREADED DRILLS - HIGH SPEED STEELSize

Size

Short

Short3/321/85/323/161/4

10-04010-03010-02110-02710-01610-010

11-10311-10511-10711-10911-113

#40#30#21#27#16#10

Stubb

Stubb

Long

Long

10-34010-33010-32110-32710-31610-310

11-30311-30511-30711-30911-313

10-24010-23010-22110-22710-21610-210

11-20311-20511-10711-20911-213

Per NAS965 Type ‘D’135° Split Point

Suffix Part # with ACR for serrated tip insert bits (Anti-Camout Ribs)




Description

8-32 Bottom

10-32 Taper

10-32 Plug

10-32 Bottom

AEROSPACE TAPS

Part # Description

23-40823-40923-41023-41123-412

6-32 Taper6-32 Plug

6-32 Bottom8-32 Taper8-32 Plug

Part #

23-413

23-417

23-418

23-419

30-635

30-63630-63330-63930-641

Zinc

CopperZinc

BlackBrass

Part # ColorDrillSize

HoleDiameter

DRILL STOPSReduces risk of damage by controllingdepth of drilled hole.

.099

.130

.146

.161

.195

#40

#30#27#21#10

1234

.0980

.1280

.1875

.2500

15-30115-30215-30315-304

2"2-1/4"2-1/2"2-3/4"

OverallLength

Flute EndLength

Nom. Dia.Small End

ShankDia.Part # Size

.0810

.1100

.1650

.2240

13/16"7/8"

1-1/16"1-1/4"

A/C TAPER ROUTERHi-Speed R.H. Helix, R.H. CutTaper - 1/4” per ft.

18-03818-04218-02118-043

#40#30#27#21

.0980

.1280

.1440

.1590

Part # DecimalEquivalent

18-04518-04818-04418-027

Part #

3/16#13#101/4

.1875

.1850

.1935

.2500

DecimalEquivalent

38-301Tin38-302Tin38-303Tin38-304Tin

1/83/81/81/8

Part # Number of Hole Sizes

HoleSizes

STEP DRILLSTitanium Nitride coated

1/8 to 1/23/16 to 1/21/4 to 3/4

3/16 to 7/8

1369

12

StepDepthSize

1234

ShankSize1/41/41/81/8

TOGGLE CLAMPSSqueeze Action,1/4-20 Spindle Thread,Neoprene Spindle

04-99210

04-9921104-99215

100 lbs.

200 lbs.200 lbs.

2-5/16”

1-1/4”1-1/4”

6-7/8”

4-5/16”4-5/16”

Part #OverallLength

JawGap

JawReach

HoldingCapacity

1-1/16”

1-1/16”1-1/16”

04-99210

51299-4011299-40

COBALT STOVE BURNER DRILLSNAS937, Jobber Length8% Cobalt, 135° Split Point

13-SB1013-SB1613-SB2113-SB2713-SB3013-SB40

#10#16#21#27#30#40

2-7/16”2-3/16”2-1/8”1-7/8”1-5/8”1-3/8”

3-5/8”3-3/8”3-1/4”

3”2-3/4”2-3/8”

.1935

.1770

.1590

.1440

.1285

.0980

Part # OverallLength

FluteLength

DrillSize

DecimalEquivalent

HSS STOP COUNTERSINKS 82°Three Flute, Integral Pilot1/4-28 Threaded Shank

27-25127-25227-25327-254

#40#30#27#21

.0980

.1280

.1440

.1590

Part # DecimalEquivalent

27-26327-25627-25727-265

Part #

3/16#13#101/4

.1875

.1850

.1935

.2500

DecimalEquivalent

HSS STOP COUNTERSINKS 100°Three Flute, Integral Pilot1/4-28 Threaded Shank

PilotSize

PilotSize

PilotSize

PilotSize

1/2” Body Diameter 1/2” Body Diameter




MS35769 (AN900)Gasket - Copper, Annular

25689

10111213151718

45678910---11121314

1/45/163/87/161/29/165/85/8

11/163/4

13/167/8

1/29/165/8

11/163/4

13/167/81

15/161

1-1/161-1/8

MS35769- AN900- A Dia. B Dia.

AS3491-01 (MS9134-01)Gasket - Engine Accessory Drive

AS3491-01ABCD

0.562”0.844”0.938”1.219”


AS3493-01A Dia.B Dia.C Dia.

6.000”5.000”4.188”

Thickness3/32”3/32”3/32”3/32”3/32”3/32”3/32”5/64”3/32”3/32”3/32”3/32”

AN901Suffix ‘A’ AluminiumSuffix ‘C’ Copper

Tube O.D.1/4

5/163/81/25/83/41

-4A-5A-6A-8A

-10A-12A-16A

-4C-5C-6C-8C

-10C------

AN901 AN901

MS35769- AN900- A Dia. B Dia. Thickness202124262931353942464851

151617181920222426272829

15/161

1-1/161-1/81-3/161-1/41-3/81-1/21-5/8

1-11/161-3/4

1-13/16

1-3/161-1/41-5/161-3/81-7/161-1/21-5/81-3/41-7/8

1-15/162

2-1/16

3/32”3/32”3/32”3/32”3/32”3/32”3/32”3/32”3/32”3/32”3/32”3/32”

B


AS3492-01ABCDE

1.109”1.656”1.768”1.875”2.112”

MS9371MS9372

Gasket, Corrosion & HeatResistant Steel Tubing,Silver Plated

Part #MS9371-07

MS9371-11MS9371-16

MS9372-016

MS9372-017

MS9372-019MS9372-021

.375

.500

.812

.531

.562

.625

.688

A

Surface roughness lay must be indirection shown for this distance - both sides

Tube Size.034 - .037

.034 - .037.034 - .037

.061 - .064

.061 - .064

.061 - .064

.061 - .064

Part # A Tube Size

A

Weld




CHERRY RIVET GAUGE269C3

CHERRYMAX /CHERRYLOCK RIVETING TOOLS

CHERRY HAND RIVETERG27• Lightweight hand riveter• Can install most aluminium Cherrymax

blind rivets up to 1/8" diameter• Includes pulling head• Rugged plastic case

G29• Lightweight, compact• Installs Cherry nutplate rivets• Equipped with 728A9-3 nose piece to

install 3/32 rivets• Can install 1/8 rivets with 728A9-104

nose piece also included

G29

G27CHERRY PNEUMATIC RIVETERG747• Lightweight, ergonomic• Air powered• Installs -4, -5 and -6 dia.

Cherrymax rivets• Can install 3/32" nutplate rivets

with H747-3NPR pulling head• Sold without pulling head

FOR INSTALLING 1/8", 5/32" & 3/16"CHERRYMAX RIVETSH701B-456 STRAIGHT• For use with G747 RivetersH753A-456 RIGHT ANGLE• For use with G747 RivetersH781-456 OFFSET• For use with G747 Riveters

• Strong & lightweight withinlaid steel blades

• Resharpenable blades thatreplace easily when necessary

• Cuts both straight and curves

• Weight 0.40 lb.• Polished mechanical jaws• Forged steel construction and hardened cushion grip handles• Ideal for kit builders• 9-1/2” length

FLUTING PLIERS

TP722

POP RIVET TOOLPS15-CS

• Installs Pop rivets up to 3/16”• Durable and Heavy Duty

AVIATION SNIPSCOMBINATION

TP51K (12" O.A.L., 1 lb)

• This unique lightweight designallows cutting to be fast and easy

TP51 Cuts left, red grips, .80 lb.TP52 Cuts right, green grips, .80 lb.TP53 Cuts straight, yellow grips, .80 lb.

BLIND RIVET NUT TOOL(Rivnut® / Nutsert Tool)CN/12• Installs aluminium blind rivet nuts

including Rivnut® brand. Sizes 6-32, 8-32, 10-32, 10-24, & 1/4• Quick change mandrels

Dash# Height Spaces Width

-1-2-3-4

1-5/8"3"

1-3/4"3"

3113

10

1-1/8"1-1/8"1-1/4"1-1/4"

• Plain dash # for aluminium.• C before dash for corrosion-resistant

steel.• F before dash for aluminium foil decal.• P before dash for plastic plate.

IDENTIFICATION PLATESMS27253

ALUMINIUM SNIPSTP792 (12" O.A.L., 1 lb)TP793 (14" O.A.L., 1.31 lbs.)

® ®

(S)




FELCO CABLE CUTTERSC-7

• Cutter up to 3/16 diameter cable

• Cuts clean and leaves no frayed ends

SWAGING TOOLTP64

• Swages 1/16, 3/32, 1/8 cable

• Wrench used to tighten bolts

CLECO PLIERSTP74V

• Installs 3/32, 1/8, 5/32,3/16 Clecos

DZUS TOOLING

• For replacement of Dzus studs withgrommets

• Will not set winged studs

SAFETY WIRE TWISTERSTP68SR (9”) & TP68SR-6 (6”)

• Three-in-one tool: Plier, Twister & Cutter

• Automatic Spring Return

NICOPRESS SLEEVE SWAGING TOOLHS-5• Swaging sizes 1/16, 3/32

1/8, 5/32, 3/16

Part #M81969/1-01M81969/1-02

M81969/14-01M81969/14-02M81969/14-03M81969/14-04M81969/14-10M81969/14-11

EXTRACTING TOOLS

Part # StudTP835ATP835BTP835CTP835DTP835E

A1 #3A1 #4F1 #4A1 #5F1 #5

CAMLOC PLIERS4P3

• Installs 2600, 2700,4002 Series Camlocs

RIVET CUTTERTP96

• Cuts 3/32 to 1/4 rivets• Hardened cutting edges• Rubber Grips

WRENCH TYPE BLIND RIVET NUT HEADERL845 Old Part # C845

• For Field Repair• Mandrels available for

sizes 4-40, 6-32, 8-32, 10-32• Mandrel Part #

60-1000 (thread size)

®

®

®

® ®




HI-LOK INSTALLATION/REMOVAL TOOLS

HI-LOK TOOL ASSEMBLYATHA - Tool kit Part # - which contains

Ratchet, Socket, & Hex Key.ATHS - Socket Part #ATRR250 - Ratchet 1/4” Sq. Driver ATHK062 - Hex Key Part #

DOUBLE BOX RATCHET WRENCHATBR - For installation of collarsonto threaded pinsATBRO -

Part #

ATBR2125ATBR2528

1/4"9/32"

3/8"

C R Radius S Radius

19/64" 21/64"

B

7/32"1/4"

4-1/4"

SocketHex

SocketPart #

RatchetDimensions

ATRR250

ATHS187

ATHS218

ATHS250

1-1/4"

A

5" 15/64" 7/16" 3/8"

B C D E

3/16"

7/32"

1/4"

RatchetPart #

HexKeySize

HexKey

Part #

1/16” ATHK062

CompleteAssembly

Part #

ATHA1

ATHA2

ATHA3

HI-LOK GAUGE2-612

COLLAR REMOVAL TOOLREM100 - Removes all threaded collars.Also will remove 'rounded-off' nuts.

Part #

REM100-56REM100-56REM100-8

R LHPin Dia.

-5-6-8

Nom.Pin Dia.

5/32"3/16"1/4"

0.250.250.31

0.280.280.35

5.605.605.80

0.420.420.55

COLLAR REMOVAL SOCKETSOMAR100 - Tool has 3 'teeth'that bite into collar to unscrew.

Part #

OMAR100-5OMAR100-6OMAR100-8

A C

-5-6-8

Nom.Pin Dia.

5/8"5/8"

13/16"

0.250.250.31

W

DA

®

25 o�set version of theratchet above. All dimensions for o�setwrench are the same as ATBR.

0

HI-LOK PIN PROTRUSION GAUGE2-1522




Tubes / Kits (8 tubes)

• Low Sweat Technology

Shell Water Detectors

• 10 detectors per tube• Reverse action syringe

ThixO Aviation GreaseThixoSyn Avi / Thixo#2

• Available in 425g Tubes & 17kg pales

Dykem Crosscheck / Torque Seal833##

• 1 ounce tubes

Part #8331483315833168331783318833198332083321

Acid Brushes

• 3/8” Width bristle brush• 1/2” (H0143), 3/8” (H0147) trim length horse hair• General purpose disposable brush

®

CONSUMABLE PRODUCTS

Premium Nitrile Gloves

• Applications including helicopter rotor shafts, splines and hub assemblies

• 24 Month Shelf Life• Meets BMS8-45 Type II

• Tamper proof nuts, fasteners & assemblies

ColourOrangeGreen

RedYellow

BlueWhitePinkGray

• Hi-Visibility for FOD control• Powder Free

• Excellent Chemical Resistance

• S, M, L, XL Available

Box / Carton (10 Boxes)

PART #: SWD-TUBE / SWD-KIT PART #: SWD-SYRINGE

• Detect presence of water in Jet Fuel

PART #: NITRILE-GLOVE-####

H0143, H0147Plastic AN Bolt GaugeAN Bolt Gauge P

®




ASSORTED HARDWARE KITS

MS20426AD3-4

MS20426AD3-5

MS20426AD3-6

MS20426AD4-3

MS20426AD4-4

MS20426AD4-5

BLIND RIVET NUT KITQuantity of 50 each

A6-75A6-120A8-75

A8-120A10-80

A6K75A6K120A8K75

A8K120A10K80

GROMMET KITQuantity of 10 each

MS35489-1 THRU -22MS35489-118, -134, -135

CLAMP KIT25 MS21919WDG2 THRU -16

TINNERMAN KITQuantity of 50 each

COTTER PIN KITQuantity of 100 each



SHEET METAL SCREW KITQuantity of 100 each

4 X 1/44 X 3/84 X 1/24 X 5/84 X 3/4

6 X 1/46 X 3/86 X 1/26 X 5/86 X 3/4

8 X 3/88 X 1/28 X 5/88 X 3/48 X 1

10 X 1/210 X 5/810 X 3/410 X 1

KIT #1KIT #2KIT #3KIT #4KIT #5KIT #6KIT #7

TRUSS HEADTRUSS HEADFLAT HEADFLAT HEADOVAL HEADOVAL HEADPAN HEAD

ZINCSTAINLESS

ZINCSTAINLESS

ZINCSTAINLESSSTAINLESS

CAPLUG KITQuantity of 50 each

GASKET KIT10 EA. MS35769-2, 6, 8, 9, 10, 13, 15, 18 ,24, 5125 EA. MS35769-31, 4850 EA. MS35769-11, 21

RING TERMINAL KITQuantity of 25 each

MS25036-110, 112, 113, 115, 148, 149, 153, 154, 156, 157M7928/5-2, 3, 4, 5

SPACER KITQuantity of 25 each with suffix “FC” for Chemical Film Finish

NAS43DD3-8, 12, 16, 20, 24, 28, 32, 34, 36, 40, 48, 64

SOLID RIVET KIT #3COMBINATION OF KITS #1 & 2

SOLID RIVET KIT #1Quantity of 1 pound of each

SOLID RIVET KIT # 2Quantity of 1 pound of each

MS20470AD3-4

MS20470AD3-5

MS20470AD3-6

MS20470AD4-3

MS20470AD4-4

MS20470AD4-5

MS20470AD4-6

MS20470AD4-8

MS20470AD5-6

MS20470AD5-8

MS20470AD6-6

MS20470AD6-8

CD3CD4CD5CD6CD8

CD10CD12

PD20PD30PD40PD50PD60PD80PD100PD120

A1348-8Z1DA1758-10Z1DA1776-4Z1DA1777-6Z1DA1778-8Z1D

A1779-10Z1DA1784-6Z1D

A1785-6Z1DA1786-8Z1DA1787-8Z1DA1787-10Z1DA1788-8Z1DA1789-8Z1D

MS20426AD4-6

MS20426AD4-8

MS20426AD5-6

MS20426AD5-8

MS20426AD6-6

MS20426AD6-8

sdf

AAE kits do not include compartment bins or cases. AAE kits include manufacturer name and lot numbers for traceability purposes. All kits consist of hardware considered to be common in the industry.

Alternate part numbers may be supplied. Please allow a minimum of 1 week to ship.




100 EA. AN526-632R4 THRU -632R12100 EA. AN526-832R THRU -832R12100 EA. AN526-1032R6 THRU -1032R16100 EA. MS24693-S2 THRU S8100 EA. MS24693-S24 THRU S30100 EA. MS24693-S46 THRU S54100 EA. MS24693-S270 THRU S276100 EA. MS35206-213 THRU -219100 EA. MS35206-226 THRU -232100 EA. MS35206-241 THRU -249100 EA. MS35207-261 THRU -267

NON STRUCTURALSCREW KIT #2100 EA. MS24693-S24 THRUS30

100 EA. MS24693-S48 THRUS52

100 EA. MS24693-S270 THRUS274

100 EA. MS24693-C24 THRUC30

100 EA. MS24693-C48 THRUC52

100 EA. MS24693-C270 THRU C274



100 EA. MS24693-C4 THRU C8

100 EA. MS24693-C24 THRU C30

100 EA. MS24693-C46 THRU C52

100 EA. MS24693-C270 THRU C276

100 EA. MS24694-C3 THRU C7

100 EA. MS24694-C48 THRU C52

BLACK BRASSSCREW KIT

100 EA. MS35214-14, 16, 20

100 EA. MS35214-25 THRU-33

100 EA. MS35214-42 THRU-47

100 EA. MS24693-BB2, 6, 26, 28

100 EA. MS24693-BB30 THRU BB36

100 EA. MS24693-BB50, 52, 54, 58


100 EA. AN526C632R4 THRU C632R12

100 EA. AN526C832R6 THRU C832R16

100 EA. AN526C1032R6 THRU C1032R16

100 EA. MS51957-30 AND MS51957-45

100 EA. MS51958-64 AND MS51958-65

INSTRUMENT SCREW/NUT KIT100 EA. MS24693-BB28 THRU BB36

100 EA. MS24693-BB50 THRU BB54

100 EA. MS35214-14 THRU -16

100 EA. MS35214-25 THRU -33

100 EA. MS35214-42 THRU -46

25 EA. MS33737-9C THRU -16C

CHERRYMAXRIVET KIT #1

100 EA. CR3212-4-02100 EA. CR3212-4-03100 EA. CR3212-4-04100 EA. CR3213-4-02100 EA. CR3213-4-03100 EA. CR3213-4-04100 EA. CR3242-4-02100 EA. CR3242-4-03100 EA. CR3242-4-04100 EA. CR3243-4-02100 EA. CR3243-4-03100 EA. CR3243-4-04

STAINLESSSCREW KIT #3100 EA. AN526C632R6 THRU C632R12

100 EA. AN526C832R6 THRU C832R12

100 EA. AN526C1032R6 THRU C1032R12

100 EA. MS24693-C24 AND MS24693-C30

100 EA. MS24693-C46 THRU C54

100 EA. MS24693-C270 THRU C276

100 EA. MS24694-C5 THRU C9

100 EA. MS24694-C48 THRU C54

CLEVIS PIN KIT

5 EA. MS20392-1C7 THRU -1C35

5 EA. MS20392-2C7 THRU -2C45

5 EA. MS20392-3C11 THRU -3C41

100 EA. MS24665-132

100 EA. MS24665-283

CHERRY NUTPLATERIVET KIT

100 EA. CCR264CS3-02

100 EA. CCR264CS3-03

100 EA. CCR264CS3-04

100 EA. CCR264SS3-02

100 EA. CCR264SS3-03

100 EA. CCR264SS3-04

CHERRYMAXRIVET KIT #2

100 EA. CR3212-5-02100 EA. CR3212-5-03100 EA. CR3212-5-04100 EA. CR3213-5-02100 EA. CR3213-5-03100 EA. CR3213-5-04100 EA. CR3242-5-02100 EA. CR3242-5-03100 EA. CR3242-5-04100 EA. CR3243-5-02100 EA. CR3243-5-03100 EA. CR3243-5-04

100 EA. AN526-632R6 THRU AN526-632R12

100 EA. AN526-832R6 THRU AN526-832R12

100 EA. AN526-1032R6 THRU AN 526-1032R12

100 EA. AN526C632R6 THRU AN526C 632R12

100 EA. AN526C832R6 THRU AN526C832R12

100 EA. AN526C1032R6 THRU AN526C1032R12

** This kit no longer contains: AN526-632R9

NON STRUCTURALSCREW KIT #1

®® ®




“AN” BOLT KIT #1(UNDRILLED)

25 EA. AN3-3A THRU AN3-12A15 EA. AN3-13A THRU AN3-22A

10 EA. AN3-23A THRU AN3-30A

25 EA. AN4-3A THRU AN4-12A10 EA. AN4-13A THRU AN4-26A 5 EA. AN4-27A THRU AN4-35A

“AN” BOLT KIT #2(DRILLED)

25 EA. AN3-3 THRU AN3-12





“AN” BOLT KIT #3(UNDRILLED)





“AN” BOLT KIT #4(DRILLED)





50 EA. AN310-5

50 EA. AN310-6100 EA. MS24665-132

100 EA. MS24665-283

25 EA. AN3-3A THRU AN3-12A15 EA. AN3-13A THRU AN3-24A25 EA. AN3-3 THRU AN3-1215 EA. AN3-13 THRU AN3-2025 EA. AN4-4A THRU AN4-12A10 EA. AN4-13A THRU AN4-20A10 EA. AN4-4 THRU AN4-2010 EA. AN5-5A THRU AN5-20A10 EA. AN5-5 THRU AN5-2010 EA. AN6-5A THRU AN6-20A10 EA. AN6-5 THRU AN6-20

100 EA. AN960-4 THRU AN960-616100 EA. AN960-4L THRU AN960-616L100 EA. AN960C4 THRU AN960C616

100 EA. AN960C4L THRU AN960C616L100 EA. AN960JD4 THRU AN960JD616

100 EA. AN960JD4L THRU AN960JD616L100 EA. AN970-3 AND AN970-450 EA. AN970-5 AND AN970-6100 EA. MS35333-36 THRU MS35333-42100 EA. MS35335-29 THRU MS35335-35

100 EA. MS35338-40 THRU MS35338-46

100 EA. MS21044N06 THRU MS21044N4100 EA. MS21045-06 THRU MS21045-4

25 EA. AN310-3 AND AN310-4

25 EA. AN320-3 AND AN320-425 EA. MS17825-3 25 EA. MS17826-3 AND MS17826-4

100 EA. AN315-3R AND AN315-4R100 EA. MS35649-242, -262, -282

100 EA. MS35650-302 AND -3252100 EA. MS21042L06 THRU MS21042L4

25 EA. NAS679A06W THRU NAS679A4W

25 EA. MS21047L06, L08, L325 EA. MS21059L06, L08, L3

25 EA. MS21061L08 AND MS21061L325 EA. MS21071L06, L08, L325 EA. MS21075L06N, L08N, L3N

WASHER KIT #2

100 EA. AN960-4 THRU AN960-616

100 EA. AN960-4L THRU AN960-616L

100 EA. AN970-3

100 EA. NAS1515H06L, 08L, 3L

100 EA. SKIN WASHER #6, #8, #10

100 EA. SKIN WASHER S/S #6, #8, #10

100 EA. 601-4, -6, -8, -10

100 EA. 603-6, -8, -10

25 EA. AN310-3 THRU AN310-6

25 EA. AN320-3 THRU AN320-6

100 EA. AN315-3R THRU AN315-6R

100 EA. AN316-4R THRU AN316-6R

100 EA. MS35649-242, -262, -282

100 EA. MS35650-302, -3252, -3312

SELF LOCKING NUT KIT NUTPLATE KIT

25 EA. MS21047L06, L08, L325 EA. MS21049L08, L325 EA. MS21051L06, L08, L325 EA. MS21055L06, L08, L325 EA. MS21059L06, L08, L325 EA. MS21061L06, L08, L325 EA. MS21071L06, L08, L325 EA. MS21073L06, L08, L325 EA. MS21075L06N, L08N, L3N

CASTLE/PLAIN NUT KIT(NON-SELF LOCKING)

WASHER KIT #1“AN” ASSORTED BOLT KIT

100 EA. MS21044N06 THRU MS21044N6100 EA. MS21045-3 AND MS21045-4

50 EA. MS21045-5 AND MS21045-6100 EA. MS21083N06 THRU MS21083N4

50 EA. MS21083N5 AND MS21083N6100 EA. MS21042L06 THRU MS21042L4

50 EA. MS21042-06 THRU MS21042-4

100 EA. MS21044N06 THRU MS21044N4

100 EA. MS21045-06 THRU MS21045-4

100 EA. MS21083N06 THRU MS21083N4

25 EA. AN310-3 AND AN310-4

25 EA. AN320-3 AND AN320-4

100 EA. AN315-3R AND AN315-4R

25 EA. NAS679A06W THRU NAS679A4W

25 EA. MS21047L06, L08, L3

25 EA. MS21059L06, L08, L3

25 EA. MS21075L06N, L08N, L3

ASST. NUT/NUTPLATEKIT #2

ASST. NUT/NUTPLATEKIT #1

MS17825-4ANDAND AN970-4




THOMAS & BETTSTIE WRAP KIT

100 EA. AN960-6100 EA. AN960-8100 EA. AN960-10100 EA. AN960-416100 EA. AN960-516100 EA. AN960-616

WASHER/COTTER PIN KIT100 EA. AN960-6L100 EA. AN960-8L100 EA. AN960-10L100 EA. AN960-416L100 EA. AN960-516L100 EA. AN960-616L

100 EA. MS24665-132100 EA. MS24665-134100 EA. MS24665-136100 EA. MS24665-283100 EA. MS24665-285100 EA. MS24665-360

100 EA. AN960C6100 EA. AN960C8100 EA. AN960C10100 EA. AN960C416100 EA. AN960C516100 EA. AN960C616

WASHER/COTTER PIN KIT STAINLESS STEEL100 EA. AN960C6L100 EA. AN960C8L100 EA. AN960C10L100 EA. AN960C416L100 EA. AN960C516L100 EA. AN960C616L

100 EA. MS24665-151100 EA. MS24665-153100 EA. MS24665-155100 EA. MS24665-300100 EA. MS24665-302100 EA. MS24665-304

MS24693 KIT

100 EA. TY25M100 EA. TY28M100 EA. TY27M

100 EA. MS21044N04100 EA. MS21044N06100 EA. MS21044N08100 EA. MS21044N3100 EA. MS21044N4

50 EA. MS21044N525 EA. MS21044N6

100 EA. MS21045-04100 EA. MS21045-06100 EA. MS21045-08100 EA. MS21045-3

50 EA. MS21045-425 EA. MS21045-525 EA. MS21045-6

MS21045 NUT KIT

100 EA. MS21083N04100 EA. MS21083N06100 EA. MS21083N08100 EA. MS21083N3100 EA. MS21083N4

50 EA. MS21083N525 EA. MS21083N6

100 EA. MS21042L04100 EA. MS21042L06100 EA. MS21042L08100 EA. MS21042L3100 EA. MS21042L4100 EA. MS21042-04100 EA. MS21042-06100 EA. MS21042-08100 EA. MS21042-3100 EA. MS21042-4

MS21042 NUT KITMS21083 NUT KIT

MS21044 NUT KIT

100 EA. TY23M100 EA. TY24M100 EA. TY253M

MS24694 KIT100 EA. MS24694-S2 THRU MS24694-S13100 EA. MS24694-S47 THRU MS24694-S58

AN525 KIT100 EA. AN525-832R6 THRU AN525-832R12100 EA. AN525-10R6 THRU AN525-10R16

100 EA. AN52 6C632R6 THRU AN526C632R12100 EA. AN526C832R6 THRU AN526C832R12100 EA. AN526C1032R6 THRU AN526C 1032R12

100 EA. MS27039C0807 THRU C0809100 EA. MS27039C0812100 EA. MS27039C1-07 THRU MS27039C 1-11

MS27039 S/S KIT

Structural Screw Kits are on Page 34

AN526 S/S KIT

100 EA. MS24693-S2 THRU MS24693-S8100 EA. MS24693-S24 THRU MS24693-S30100 EA. MS24693-S46 THRU MS24693-S52100 EA. MS24693-S270 THRU MS24693-S276

®




AN806D2 AN818-2D AN924-3D AN929-2 MS20819-2DAN806D3 AN818-3D AN924-4D AN929-3 MS20819-3D

AN806D4 AN818-4D AN924-5D AN929-4 MS20819-4DAN806D5 AN818-5D AN924-6D AN929-5 MS20819-5D

AN806D6 AN818-6D AN924-8D AN929-6 MS20819-6DAN806D8 AN818-8D AN929-8 MS20819-8D

FITTING KIT #1Quantity of 5 each


MS20813-1MS21913-4MS21913-5MS21913-6MS21913D4MS21913D5


AN806D4 AN924-4D MS20819-4D 471-2DAN806D6 AN924-6D MS20819-6D 471-4DAN806D8 AN924-8D MS20819-8D 471-6DAN818-4D AN929-4 MS20822-4D 491-4AN818-6D AN929-6 MS20823-4D 491-6AN818-8D AN929-8 MS20823-6D 491-8D


MS21913D6MS21914-4MS21914-5MS21914-6MS21914-4DMS21914-5D

MS21914-6DMS21921-4DMS21921-6DMS21922-4MS21922-6

AN815-2DAN815-3DAN815-4DAN815-5D

AN815-6DAN815-8D

AN816-3DAN816-4DAN816-5DAN816-6D

AN821-4DAN824-4D

AN824-6DAN833-4DAN833-6D

MS20822-3D

MS20822-4DMS20822-5D

MS20822-6DMS20823-4DMS20823-6DMS20825-4D

MS20825-6DMS20826-4D


AN806D4 AN924-4D MS20819-4DAN806D6 AN924-6D MS20819-6DAN806D8 AN924-8D MS20819-8DAN818-4D AN929-4 MS20822-4DAN818-6D AN929-6 MS20823-4DAN818-8D AN929-8 MS20825-4D




100 EA. MS24693-C26 THRU MS24693-C30100 EA. MS24693-C48 THRU MS24693-C52100 EA. MS24693-C272 THRU MS24693-C274100 EA. AN526C632R6 THRU AN526C632R12100 EA. AN526C832R6 THRU AN526C832R12100 EA. AN526C1032R6 THRU AN526C1032R12100 EA. MS27039C0808 THRU MS27039C0810100 EA. MS27039C1-08 THRU MS27039C1-10100 EA. MS24694-C3 THRU MS24694-C7100 EA. MS24694-C50 THRU MS24694-C54100 EA. MS24665-151100 EA. MS24665-153100 EA. MS24665-155100 EA. MS24665-300100 EA. MS24665-302100 EA. MS24665-304100 EA. AN960C6100 EA. AN960C8100 EA. AN960C10100 EA. AN960C416100 EA. AN960C6L100 EA. AN960C8L100 EA. AN960C10L100 EA. AN960C416L100 EA. EC1075-012-06SS100 EA. EC1080-017-08SS100 EA. EC1085-020-10SS100 EA. MS35333-71100 EA. MS35333-72100 EA. MS35333-73100 EA. MS35333-74100 EA. MS35338-136100 EA. MS35338-137100 EA. MS35338-138100 EA. MS35338-139100 EA. 601-6100 EA. 601-8100 EA. 601-10

FBO STAINLESS STARTER KIT #1 (128 Pieces)25 EA. AN3C3A THRU AN3C10A25 EA. AN4C4A THRU AN4C10A25 EA. MS21059L0625 EA. MS21059L0825 EA. MS21059L325 EA. MS21060L0625 EA. MS21060L0825 EA. MS21060L325 EA. MS21075L06N25 EA. MS21075L08N25 EA. MS21075L3N25 EA. MS21076L08N25 EA. MS21076L3N25 EA. AN310C325 EA. AN310C425 EA. AN320C325 EA. AN320C425 EA. MS21044C0625 EA. MS21044C0825 EA. MS21044C325 EA. MS21045C0625 EA. MS31045C0825 EA. MS21045C325 EA. MS35489-10 THRU MS35489-1225 EA. MS35489-13425 EA. MS35489-1425 EA. A6K7525 EA. A8K7525 EA. A10K8025 EA. A6-7525 EA. A8-7525 EA. A10-8010 EA. MS21919WDG2 THRU MS21919WDG1210 EA. MS35769-1110 EA. MS35769-2110 EA. MS35769-3110 EA. MS35769-48

FBO STAINLESS STARTER KIT #2 (77 Pieces)100 EA. MS24693-C26 THRU MS24693-C30100 EA. MS24693-C48 THRU MS24693-C52100 EA. MS24693-C272 THRU MS24693-C274100 EA. AN526C632R6 THRU AN526C632R12100 EA. AN526C832R6 THRU AN526C832R12100 EA. AN526C1032R6 THRU AN526C1032R12100 EA. MS24694-C3 THRU MS24694-C7100 EA. MS24694-C50 THRU MS24694-C54100 EA. MS24665-151100 EA. MS24665-153100 EA. MS24665-155100 EA. MS24665-300100 EA. MS24665-302100 EA. MS24665-304100 EA. AN960C6100 EA. AN960C8100 EA. AN960C10100 EA. AN960C416

100 EA. AN960C6L100 EA. AN960C8L100 EA. AN960C10L100 EA. AN960C416L100 EA. EC1075-012-06SS100 EA. EC1080-017-08SS100 EA. EC1085-020-10SS

25 EA. AN3C3A THRU AN3C10A25 EA. AN4C4A THRU AN4C10A25 EA. AN310C325 EA. AN310C425 EA. AN320C325 EA. AN320C425 EA. MS21044C0625 EA. MS21044C0825 EA. MS21044C325 EA. MS21045C0825 EA. MS21045C3




100 EA. MS24693-S26 THRU MS24693-S30100 EA. MS24693-S48 THRU MS24693-S52100 EA. MS24693-S272 THRU MS24693-S274100 EA. AN526-632R6 THRU AN526-632R12100 EA. AN526-832R6 THRU AN526-832R12100 EA. AN526-1032R6 THRU AN526-1032R12100 EA. AN525-832R6 THRU AN525-832R12100 EA. AN525-10R6 THRU AN525-10R12100 EA. MS24694-S4 THRU MS24694-S9100 EA. MS24694-S50 THRU MS24694-S54100 EA. MS24665-132100 EA. MS24665-134100 EA. MS24665-136100 EA. MS24665-151100 EA. MS24665-153100 EA. MS24665-155100 EA. MS24665-283100 EA. MS24665-285100 EA. MS24665-287100 EA. MS24665-300100 EA. MS21044N06100 EA. MS21044N08100 EA. MS21044N3100 EA. MS21044N4100 EA. MS21045-06100 EA. MS21045-08100 EA. MS21045-3100 EA. AN960-6100 EA. AN960-8100 EA. AN960-10100 EA. AN960-416100 EA. AN960-6L100 EA. AN960-8L100 EA. AN960-10L100 EA. AN960-416L100 EA. MS35333-37 THRU MS35333-40100 EA. MS35335-31 THRU MS35335-33100 EA. MS35338-41 THRU MS35338-44

FBO STARTER KIT #1 (173 Pieces)25 EA. AN3-3A THRU AN3-12A25 EA. AN4-4A THRU AN4-12A25 EA. MS21047L0625 EA. MS21047L0825 EA. MS21047L325 EA. MS21059L0625 EA. MS21059L0825 EA. MS21059L325 EA. MS21075L06N25 EA. MS21075L08N25 EA. MS21075L3N25 EA. AN310-325 EA. AN310-425 EA. AN320-325 EA. AN320-425 EA. A6K7525 EA. A8K7525 EA. A10K8025 EA. A6-7525 EA. A8-7525 EA. A10-8010 EA. AN3-3 THRU AN3-1210 EA. AN4-4 THRU AN4-1210 EA. MS35489-10 THRU MS35489-1210 EA. MS35489-13410 EA. MS35489-1410 EA. MS21919WDG2 THRU MS21919WDG1210 EA. MS35769-1110 EA. MS35769-2110 EA. MS35769-3110 EA. MS35769-4810 EA. MS28775-010 THRU MS28775-01310 EA. MS28775-111 THRU MS28775-11610 EA. MS29513-01010 EA. MS29513-11110 EA. MS29513-138

100 EA. MS24693-S26 THRU MS24693-S30100 EA. MS24693-S48 THRU MS24693-S52100 EA. MS24693-S272 THRU MS24693-S274100 EA. AN526-632R6 THRU AN526-632R12100 EA. AN526-832R6 THRU AN526-832R12100 EA. AN526-1032R6 THRU AN526-1032R12100 EA. AN525-832R6 THRU AN525-832R12100 EA. AN525-10R6 THRU AN525-10R12100 EA. MS24694-S4 THRU MS24694-S9100 EA. MS24694-S50 THRU MS24694-S54100 EA. MS24665-132100 EA. MS24665-134100 EA. MS24665-136100 EA. MS24665-151100 EA. MS24665-153100 EA. MS24665-155100 EA. MS24665-283100 EA. MS24665-285100 EA. MS24665-287

FBO STARTER KIT #2 (91 Pieces)100 EA. MS24665-300100 EA. MS21044N06100 EA. MS21044N08100 EA. MS21044N3100 EA. MS21044N4100 EA. MS21045-06100 EA. MS21045-08100 EA. MS21045-3100 EA. AN960-6100 EA. AN960-8100 EA. AN960-10100 EA. AN960-416100 EA. AN960-6L100 EA. AN960-8L100 EA. AN960-10L100 EA. AN960-416L100 EA. MS35333-37 THRU MS35333-40100 EA. MS35335-31 THRU MS35335-33100 EA. MS35338-41 THRU MS35338-44

** This kit does not contain: AN526-632R9

** This kit does not contain: AN526-632R9




FBO STARTER BIN KIT (144 Pieces)100 MS24693-S26100 MS24693-S27100 MS24693-S28100 MS24693-S29100 MS24693-S30100 MS24693-S48100 MS24693-S49100 MS24693-S50100 MS24693-S51100 MS24693-S52100 MS24693-S272100 MS24693-S273100 MS24693-S274100 AN526-632R6100 AN526-632R8100 AN526-632R10100 AN526-632R12100 AN526-832R6100 AN526-832R8100 AN526-832R10100 AN526-832R12100 AN526-1032R6100 AN526-1032R8100 AN526-1032R10100 AN526-1032R12100 AN525-832R6100 AN525-832R7100 AN525-832R8100 AN525-832R9100 AN525-832R10100 AN525-832R11100 AN525-832R12100 AN525-10R6100 AN525-10R7100 AN525-10R8100 AN525-10R9

100 AN525-10R10100 AN525-10R11100 AN525-10R12100 MS24694-S4100 MS24694-S5100 MS24694-S6100 MS24694-S7100 MS24694-S8100 MS24694-S9100 MS24694-S50100 MS24694-S51100 MS24694-S52100 MS24694-S53100 MS24694-S54100 MS24665-132100 MS24665-134100 MS24665-136100 MS24665-151100 MS24665-153100 MS24665-155100 MS24665-283100 MS24665-285100 MS24665-300100 MS21044N06100 MS21044N08100 MS21044N3100 MS21044N4100 MS21045-06100 MS21045-08100 MS21045-3100 MS21045-4100 MS21083N06100 MS21083N08100 MS21083N3100 MS21083N4100 AN310-3

100 AN310-4100 AN320-3100 AN320-4100 AN960-6100 AN960-8100 AN960-10100 AN960-416100 AN960-6L100 AN960-8L100 AN960-10L100 AN960-416L100 MS35333-37100 MS35333-38100 MS35333-39100 MS35333-40100 MS35335-31100 MS35335-32100 MS35335-33100 MS35335-34100 MS35338-41100 MS35338-42100 MS35338-43100 MS35338-44

25 MS21047L0625 MS21047L0825 MS21047L350 MS21059L0650 MS21059L0850 MS21059L350 MS21075L06N50 MS21075L08N50 MS21075L3N50 AN3-3A50 AN3-4A50 AN3-5A50 AN3-6A

50 AN3-7A25 AN3-10A25 AN3-11A25 AN3-12A25 AN4-4A25 AN4-5A25 AN4-6A25 AN4-7A25 AN4-10A25 AN4-11A25 AN4-12A25 AN3-325 AN3-425 AN3-525 AN3-625 AN3-725 AN3-1025 AN3-1125 AN3-1225 AN4-425 AN4-525 AN4-625 AN4-725 AN4-1025 AN4-1125 AN4-1250 A6K7550 A8K7550 A10K8050 A6-7550 A8-7550 A10-8025 MS35769-1125 MS35769-2125 MS35489-1125 MS35489-12

100 MS24693-S26100 MS24693-S27100 MS24693-S28100 MS24693-S29100 MS24693-S30100 MS24693-S48100 MS24693-S49100 MS24693-S50100 MS24693-S51100 MS24693-S52100 MS24693-S272100 MS24693-S273100 MS24693-S274100 AN526-632R6100 AN526-632R8100 AN526-632R10100 AN526-632R12100 AN526-832R6100 AN526-832R8100 AN526-832R10100 AN526-832R12100 AN526-1032R6100 AN526-1032R8100 AN526-1032R10

100 AN526-1032R12100 AN525-832R6100 AN525-832R7100 AN525-832R8100 AN525-832R9100 AN525-832R10100 AN525-832R11100 AN525-832R12100 AN525-10R6100 AN525-10R7100 AN525-10R8100 AN525-10R9100 AN525-10R10100 AN525-10R11100 AN525-10R12100 MS24694-S4100 MS24694-S5100 MS24694-S6100 MS24694-S7100 MS24694-S8100 MS24694-S9100 MS24694-S50100 MS24694-S51100 MS24694-S52

100 MS24694-S53100 MS24694-S54100 MS24665-132100 MS24665-134100 MS24665-136100 MS24665-151100 MS24665-153100 MS24665-155100 MS24665-283100 MS24665-285100 MS24665-300100 MS21044N06100 MS21044N08100 MS21044N3100 MS21044N4100 MS21045-06100 MS21045-08100 MS21045-3100 MS21045-4100 MS21083N06100 MS21083N08100 MS21083N3100 MS21083N4100 AN960-6

100 AN960-8100 AN960-10100 AN960-416100 AN960-6L100 AN960-8L100 AN960-10L100 AN960-416L100 MS35333-37P100 MS35333-38P100 MS35333-39P100 MS35333-40P100 MS35338-41M100 MS35338-42M100 MS35338-43M100 MS35338-44M

25 MS21047L0625 MS21047L0825 MS21047L325 MS21059L0625 MS21059L0825 MS21059L325 MS21075L06N25 MS21075L08N25 MS21075L3N

FBO STARTER BIN KIT (96 Pieces)




100 4X1/2THA S/S100 4X5/8THA S/S100 4X3/4THA S/S100 6X1/2THA S/S100 6X5/8THA S/S100 6X3/4THA S/S100 8X1/2THA S/S100 8X5/8THA S/S100 8X3/4THA S/S100 10X1/2THA S/S100 10X5/8THA S/S100 10X3/4THA S/S

SHEET METAL, S/S SCREW BIN KIT100 4X1/2FHA S/S100 4X5/8FHA S/S100 4X3/4FHA S/S100 6X1/2FHA S/S100 6X5/8FHA S/S100 6X3/4FHA S/S100 8X1/2FHA S/S100 8X5/8FHA S/S100 8X3/4FHA S/S100 10X1/2FHA S/S100 10X5/8FHA S/S100 10X3/4FHA S/S

100 4X1/2THA100 4X5/8THA100 4X3/4THA100 6X1/2THA100 6X5/8THA100 6X3/4THA100 8X1/2THA100 8X5/8THA100 8X3/4THA100 10X1/2THA100 10X5/8THA100 10X3/4THA

SHEET METAL STEEL BIN KIT100 4X1/2FHA100 4X5/8FHA100 4X3/4FHA100 6X1/2FHA100 6X5/8FHA100 6X3/4FHA100 8X1/2FHA100 8X5/8FHA100 8X3/4FHA100 10X1/2FHA100 10X5/8FHA100 10X3/4FHA

25 AN3-3A25 AN3-4A25 AN3-5A25 AN3-6A25 AN3-7A25 AN3-10A20 AN3-11A20 AN3-12A20 AN3-13A20 AN3-14A20 AN3-15A20 AN3-16A

UNDRILLED BOLT BIN KIT #1 UNDRILLED BOLT BIN KIT #2

DRILLED BOLT BIN KIT #1 DRILLED BOLT BIN KIT #2

25 AN4-3A25 AN4-4A25 AN4-6A25 AN4-7A25 AN4-10A20 AN4-11A20 AN4-12A20 AN4-13A20 AN4-14A20 AN4-15A20 AN4-16A

25 AN3-325 AN3-425 AN3-525 AN3-625 AN3-725 AN3-1020 AN3-1120 AN3-1220 AN3-1320 AN3-1420 AN3-1520 AN3-16

25 AN4-325 AN4-425 AN4-625 AN4-725 AN4-1020 AN4-1120 AN4-1220 AN4-1320 AN4-1420 AN4-1520 AN4-16

100 AN960-6100 AN960-8100 AN960-10100 AN960-416100 AN960-516100 AN960-616100 AN960-6L100 AN960-8L100 AN960-10L100 AN960-416L100 AN960-516L100 AN960-616L

WASHER BIN KIT #1100 AN960C6100 AN960C8100 AN960C10100 AN960C416100 AN960C516100 AN960C616100 AN960C6L100 AN960C8L100 AN960C10L100 AN960C416L100 AN960C516L100 AN960C616L

WASHER BIN KIT #2100 MS35333-37100 MS35333-38100 MS35333-39100 MS35333-40100 MS35338-41100 MS35338-42100 MS35338-43100 MS35338-44100 AN970-3

50 AN970-425 AN970-525 AN970-6

100 MS35333-37100 MS35333-38100 MS35333-39100 MS35333-40100 MS35338-41100 MS35338-42100 MS35338-43100 MS35338-44100 AN970-3

50 AN970-425 AN970-525 AN970-6

100 MS24665-1012100 MS24665-1013100 MS24665-132100 MS24665-134100 MS24665-136100 MS24665-138100 MS24665-140100 MS24665-151100 MS24665-153100 MS24665-155100 MS24665-157100 MS24665-210

100 AN960C6100 AN960C8100 AN960C10100 AN960C416100 AN960C6L100 AN960C8L100 AN960C10L100 AN960C416L100 MS24665-151100 MS24665-153100 MS24665-155100 MS24665-300

COTTER PIN BIN KIT WASHER/COTTER PIN S/S BIN KIT100 MS24665-212100 MS24665-22100 MS24665-229100 MS34665-231100 MS24665-283100 MS24665-285100 MS24665-287100 MS24665-289100 MS24665-300100 MS24665-302100 MS24665-360100 MS24665-362

100 MS24665-302100 MS24665-304100 EC1075-012-06SS100 EC1080-017-08SS100 EC1085-020-10SS100 MS35333-71100 MS35333-72100 MS35333-73100 MS35333-74100 MS35338-136100 MS35338-137100 MS35338-138

100 AN3-3100 AN3-4100 AN3-5

50 AN3-650 AN3-750 AN3-1050 AN3-1150 AN3-1250 AN4-450 AN4-550 AN4-650 AN4-7

25 AN4-1025 AN4-1125 AN4-1225 AN5-625 AN5-725 AN5-1020 AN5-1120 AN5-12

100 AN310-3100 AN310-4

50 AN310-5500 MS24665-132

100 AN3-3A100 AN3-4A100 AN3-5A

50 AN3-6A50 AN3-7A50 AN3-10A50 AN3-11A50 AN3-12A50 AN4-4A50 AN4-5A50 AN4-6A50 AN4-7A

25 AN4-10A25 AN4-11A25 AN4-12A

100 AN3C3A100 AN3C4A100 AN3C5A

50 AN4C4A50 AN4C5A

100 AN3H3A100 AN3H4A

50 AN4H4A50 AN4H5A




100 MS24693-S26100 MS24693-S28100 MS24693-S29100 MS24693-S48100 MS24693-S50100 MS24693-S51100 MS24693-S52100 MS24693-S272100 MS24693-S273100 MS24693-S274100 AN526-632R6100 AN526-632R8

NON-STRUCTURAL SCREW BIN KIT NON-STRUCTURAL S/S SCREW BIN KIT100 MS24693-C26100 MS24693-C28100 MS25693-C29100 MS24693-C30100 MS24693-C48100 MS24693-C50100 MS24693-C51100 MS24693-C52100 MS24693-C270100 MS24693-C272100 MS24693-C273100 MS24693-C274

100 AN526-632R10100 AN526-832R6100 AN526-832R8100 AN526-832R10100 AN526-1032R8100 AN526-1032R10100 AN526-1032R12100 MS35206-228100 MS35206-230100 MS35206-245100 MS35207-263100 MS35207-264

100 AN526C632R6100 AN526C632R8100 AN526C632R10100 AN526C632R12100 AN526C832R6100 AN526C832R8100 AN526C832R10100 AN526C832R12100 AN526C1032R8100 AN526C1032R10100 AN526C1032R12100 AN526C1032R16

100 MS27039-0804100 MS27039-0805100 MS27039-0806100 MS27039-0807100 MS27039-0808100 MS27039-0809100 MS27039-0810100 MS27039-0811100 MS27039-0812100 MS27039-1-04100 MS27039-1-05100 MS27039-1-06


STRUCTURAL PAN HEAD BIN KIT PAN HEAD BIN KIT100 MS27039-1-07100 MS27039-1-08100 MS27039-1-09100 MS27039-1-10100 MS27039-1-11100 MS27039-1-12100 MS27039-1-14100 MS27039-1-15100 MS27039-1-16100 MS27039C0808100 MS27039C0809100 MS27039C1-08


100 MS24693-S2100 MS24693-S3100 MS24693-S4100 MS24693-S6100 MS24693-S7100 MS24693-S24100 MS24693-S25100 MS24693-S26100 MS24693-S27100 MS24693-S28100 MS24693-S29100 MS24693-S30

MS24693 BIN KIT100 MS24693-C2100 MS24693-C3100 MS24693-C4100 MS24693-C6100 MS24693-C7100 MS24693-C24100 MS24693-C25100 MS24693-C26100 MS24693-C27100 MS24693-C28100 MS24693-C29100 MS24693-C30

MS24693 S/S BIN KIT100 MS24693-C46100 MS24693-C47100 MS24693-C48100 MS24693-C49100 MS24693-C50100 MS24693-C51100 MS24693-C52100 MS24693-C270100 MS24693-C271100 MS24693-C272100 MS24693-C273100 MS24693-C274

100 MS24693-S46100 MS24693-S47100 MS24693-S48100 MS24693-S49100 MS24693-S50100 MS24693-S51100 MS24693-S52100 MS24693-S270100 MS24693-S271100 MS24693-S272100 MS24693-S273100 MS24693-274

100 MS24694-S2100 MS24694-S3100 MS24694-S4100 MS24694-S5100 MS24694-S6100 MS24694-S7100 MS24694-S8100 MS24694-S9100 MS24694-S10100 MS24694-S11100 MS24694-S12100 MS24694-S13

MS24694 BIN KIT100 AN525-832R5100 AN525-832R6100 AN525-832R7100 AN525-832R8100 AN525-832R9100 AN525-832R10100 AN525-832R11100 AN525-832R12100 AN525-832R14100 AN525-832R16100 AN525-10R5100 AN525-10R6

AN525 BIN KIT100 MS24694-S47100 MS24694-S48100 MS24694-S49100 MS24694-S50100 MS24694-S51100 MS24694-S52100 MS24694-S53100 MS24694-S54100 MS24694-S55100 MS24694-S56100 MS24694-S57100 MS24694-S58

100 AN525-10R7100 AN525-10R8100 AN525-10R9100 AN525-10R10100 AN525-10R11100 AN525-10R12100 AN525-10R14100 AN525-10R16100 AN525-10R18100 AN525-10R20

50 AN525-416R825 AN525-416R10




100 AN526-632R6100 AN526-632R8100 AN526-632R10100 AN526-632R12100 AN526-832R6100 AN526-832R8100 AN526-832R10100 AN526-832R12100 AN526-1032R6100 AN526-1032R8100 AN526-1032R10100 AN526-1032R12

100 AN310-3100 AN310-4

50 AN310-525 AN310-610 AN310-7

5 AN310-8100 AN320-3100 AN320-4

50 AN320-525 AN320-610 AN320-7

5 AN320-8

TRUSS HEAD BIN KIT

CASTLE/PLAIN NUT BIN KIT

100 AN526C632R6100 AN526C632R8100 AN526C632R10100 AN526C632R12100 AN526C832R6100 AN526C832R8100 AN526C832R10100 AN526C832R12100 AN526C1032R6100 AN526C1032R8100 AN526C1032R10100 AN526C1032R12

100 AN315-3R100 AN315-4R

50 AN315-5R25 AN315-6R

100 AN316-4R50 AN316-5R25 AN316-6R

100 MS35649-242100 MS35649-262100 MS35649-282100 MS35650-302100 MS35650-3252

100 MS24694-S4100 MS24694-S5100 MS24694-S6100 MS24694-S7100 MS24694-S49100 MS24694-S50100 MS24694-S51100 MS24694-S52100 MS24694-S53100 MS24694-S54100 AN525-832R6100 AN525-832R7

STRUCTURAL SCREW BIN KIT100 AN525-832R8100 AN525-832R10100 AN525-10R7100 AN525-10R8100 AN525-10R9100 AN525-10R10100 AN525-10R12100 MS27039-0807100 MS27039-0808100 MS27039-1-08100 MS27039-1-09100 MS27039-1-10

TINNERMAN BIN KIT50 D6187-4Z150 A1784-6Z1D50 A1785-6Z1D50 A1786-8Z1D50 A1274-8-150 A1789-8Z1D50 A1348-8Z1D50 A1787-8Z1D50 A1788-8Z1D50 A1758-10Z1D50 A1350-10Z1D50 A1787-10Z1D

50 A1932-8Z1D50 A1776-4Z1D50 A1181-6Z1D50 A1777-6Z1D50 A1778-8Z1D50 A1779-10Z1D50 A6195-6Z1D50 A6195-8Z1D5 A6912-832-502

100 A3236-012-24A100 A3135-017-24A100 A3235-020-24A

10 AN806D410 AN806D510 AN806D610 AN815-4D

5 AN815-6D10 AN816-4D

5 AN816-6D10 AN818-4D10 AN818-6D

5 AN824-4D5 AN824-6D5 AN833-6D

FITTING BIN KIT10 AN929-210 AN929-310 AN929-410 AN929-510 AN929-625 MS20819-2D25 MS20819-3D25 MS20819-4D25 MS20819-5D25 MS20819-6D

5 MS20822-4D5 MS20823-6D

RING TERMINAL / WIRE CAP BIN KIT100 MS25036-101100 MS25036-102100 MS25036-103100 MS25036-106100 MS25036-108100 MS25036-112100 MS25036-148100 MS25036-149100 MS25036-150100 MS25036-153

50 MS25036-156100 M7928/5-2

100 M7928/5-350 M7928/5-425 M7928/5-5

100 32446100 32448100 MS25274-2100 MS25274-3

25 D436-3625 D436-3725 D436-3825 D142-5025 D142-51


10 MS35489-1510 MS35489-1610 MS35489-1710 MS35489-1810 MS35489-1910 MS35489-20

5 MS35489-22100 MS35769-6100 MS35769-8

50 MS35769-1125 MS35769-2125 MS35769-48

NUTPLATE BIN KIT100 MS21047L06100 MS21047L08100 MS21047L3100 MS21049L08100 MS21049L3100 MS21055L3100 MS21059L06100 MS21059L08100 MS21059L3

50 MS21059L4100 MS21061L08100 MS21061L3

100 MS21069L06100 MS21069L08100 MS21069L3100 MS21071L06100 MS21071L08100 MS21071L3100 MS21073L06100 MS21073L08100 MS21073L3100 MS21075L06N100 MS21075L08N100 MS21075L3N

100 MS21044N06100 MS21044N08100 MS21044N3100 MS21044N4

50 MS21044N525 MS21044N6

100 MS21045-06100 MS21045-08100 MS21045-3100 MS21045-4

50 MS21045-525 MS21045-6

LOCKNUT/CASTLE NUT BIN KIT100 MS21083N08100 MS21083N3100 MS21083N4100 AN310-3100 AN310-4

50 AN310-525 AN310-6

100 MS21042L06100 MS21042L08100 MS21042L3100 MS21042L4

50 MS21042L5


INSTRUMENT SCREW/NUT BIN KIT100 MS24693-BB28100 MS24693-BB30100 MS24693-BB32100 MS24693-BB34100 MS24693-BB36

25 MS33737-10C25 MS33737-11C25 MS33737-12C25 MS33737-13C25 MS33737-14C25 MS33737-15C25 MS33737-16C

GROMMET / GASKET BIN KIT®




ALPHABETICAL LISTINGAeroduct Ducting (Scat Hose) ..... 183Aeroquip® Firesleeve ....................... 183Aeroquip® Fittings .................... 180-185Aeroquip® Hose ........................ 181-185Aerospace Taps ................................... 98Air Valve ................................................ 177Aircraft Wire ........................................ 137Airloc® Fasteners .................................. 87Apex Uni-Joint .................................... 177Avex® Rivets ........................................... 45Band-It® Clamps ................................. 183Bearings ....................................... 186-189Black Brass Screws ............................... 39Bleeder Valve, Hydraulic ................. 177Blind Rivet Nuts .....................................46Brackett Air Filters ............................. 179Bolts AN .................................................. 12-18 MS .................................................. 24-26 NAS ................................................ 19-29Bonding Jumpers .............................. 137Bus Bar ................................................... 143Bushings ............................................... 125Butt Splices .......................................... 142Cable, Control ..................................... 194Cable Cutters ...................................... 201Cable Hardware ........................ 192-195Cable Thimble .................................... 194Cable Ties ............................................. 138Camloc® Pliers ..................................... 201Camloc® ........................................... 83 -85Caplugs ........................................ 178, 180Cherry® Nutplate Rivets .................... 52Cherry® Rivets ................................. 50-54Cherry® Rivet Tooling ....................... 200Cherry® “Q” Rivets ................................ 52Circuit Breakers .................................. 139Clamps ......................................... 149-151Cleco® Products ................................. 197Clevis Bolts & Clevis Pins .................... 18Clevis Rod Ends .................................. 195Conical Seal ..........................................179Connector Contacts & Plugs .......... 135Consumables ..................................... 203Cotter Pins ................................... 101-102Cowling Mounts ................................ 117Crimp Splices ...................................... 137Curtis Drain Valves ............................ 179Delron® Inserts ................................... 144Drill Bits ........................................ 196-198Drill Gauge ........................................... 196Drill Jigs ................................................. 196Drill Stops ............................................. 198Dykem Chrosscheck ......................... 203Dzus® Panel Fasteners ................. 88 -89Dzus® Mounting Strips ....................... 90Dzus® Tooling ........................................ 89Electrical Products .................... 134-143Exhaust Manifold Nuts ..................... 107Eyebolts ................................................... 17

Fairing Washer ...................................... 95Filter Element ...................................... 179Firesleeve ............................................. 183Fittings AN, MS, NAS ......................... 153-177 Aeroquip® ............................. 180-183 Nylon & Brass ............................... 152Fuel Cap ............................................... 177Fuses ...................................................... 134Gang Channel .................................... 117Gaskets ................................................. 199Gloves, Nitrile ...................................... 203Grease Fittings ................................... 180Grommets ............................................ 126Grommet Edging .............................. 140Hardware Kits ............................ 204-214Heat Shrink Tubing .......................... 140Hi-Lok® Pins & Collars .................. 63-82Hi-Lok® Tooling .................................. 202Hinges & Pins ...................................... 191Hose .............................................. 181-185Hose Clamps ....................................... 149Huck® Rivets ........................................... 48Identi�cation Plates ..........................200Indicator Lights ................................. 140Insert Bits ............................................. 197Insertion/Extraction Tool ............... 135Inserts Helicoil® Inserts .................. 145-146 Keenserts® ............................ 145-146 Panel Inserts ................................. 144 Sandwich Panel Inserts ... 147-148Insulating Strip .................................. 143Jo-Bolts ................................................... 47Klixon® Breakers ................................. 139Knife Splices ....................................... 142Latches ................................................. 190Lighting/Bulbs ................................... 134Lord Cowling Mounts ..................... 117Locking Clips/Pins ............................ 194Lubrication Fitting ........................... 177Monel Rivets ......................................... 59Nicopress® Sleeves ............................ 194Nipple, Electrical ............................... 138Norprene Tubing, Black ................. 152Nutplates .................................... 119-124Nuts 12 Point Nuts ...................... 115-116 AN, MS, NAS ........................ 103-117 Barrel Nuts .................................... 117 Castle Nuts ........................... 103-105 Continental, Lycoming ............. 107 Clip Nuts (Monadnock) ............ 118 EB Nuts (DHN35) ........................ 116 Instrument Nuts ......................... 123 Jam Nuts ...............................109, 114 Metric Nuts ................................... 116 Nylon Cap Nuts ........................... 114 Pal-Nuts ......................................... 107 Plain Nuts ............................. 108-110

Piper Clip Nuts ............................ 124 Right Angle Nuts ........................ 114 Self-Locking Nuts ............... 106-117Nutserts ................................................. 46Nylon Fittings ..................................... 152O’Rings / Packings.................... 127-133Panel Strips (Dzus) ............................. 90Plug Button .......................................... 100Poly-Flo® Tubing ................................ 152Pop Rivets ............................................... 45Pop Rivet Tooling .............................. 200Pulleys ................................................... 191Pulley Guard Pins .............................. 195Quartz Lamps ..................................... 134Retaining Rings ................................... 11Ring Terminals ........................... 141-142Rivnuts® ................................................. 46Rod Ends ............................................... 195Safety Wire ........................................... 195SCAT / SCEET ....................................... 183Screws (AN, MS, NAS) ................... 30-43Screwlock Assembly ........................ 136Sealed Beam Lamps ......................... 134Seals (Conical)..................................... 179Shackles ................................................ 195Sheet Metal Screws ............................. 44Sheet Metal Tooling.......................... 200Shur-Lok® Clipnuts ............................ 117Snap Fasteners ................................... 100Solder Sleeves .................................... 137Solid Rivets ...................................... 55-62Southco® Fasteners ...................... 91-92Spacers ................................................. 125Spiral Wrap .......................................... 137Spring Pins ............................................101Stop Countersink .............................. 198Step Drills ............................................. 198Strap Duplicators .............................. 196Strato�ex® Products ....... 180, 184, 185Structural Panel Fasteners ......... 86, 87Structural Screw Kits ........................... 34Switches ............................................... 140Switch Guards ..................................... 140T & B Sta-Kon® Terminals ................. 141Taper Router Bit ................................. 198Terminal Board Assembly ............... 143Terminal Connecting Link .............. 143Terminal Junction Block .................. 136Terminal Shield ................................... 12ThixO Grease ....................................... 203Tie Wraps .............................................. 138Tinnerman® Nutplates ..................... 124Tinnerman® Washers .......................... 95Toggle Clamps ................................... 198Tooling ......................................... 198-202Tridair® Products ........................... 86, 87Unibit® Drill Bits ................................. 196Washers ................................... 93-99, 101Water Detectors ................................. 203Wire / Wire Caps ....................... 137-138




ANAN3 ................................................................ 12AN4 ................................................................ 13AN5 ................................................................ 14AN6 ................................................................ 14AN7 ................................................................ 15AN8 ................................................................ 15AN23 ............................................................. 18AN24 ............................................................. 18AN42B, AN43B ........................................... 17AN100 .........................................................194AN115 .........................................................195AN173 .................................................... 16, 17AN174 .................................................... 16, 17AN175 .................................................... 16, 17AN176 .................................................... 16, 17AN177 ........................................................... 17AN178 ........................................................... 17AN256 .........................................................114 AN310 ........................................................103AN315 .........................................................109AN316 .........................................................109AN320 .........................................................103AN415, AN416 .........................................194AN490HT ...................................................195AN502 ........................................................... 40AN503 ........................................................... 40AN525 ........................................................... 38AN526 ........................................................... 35AN530 ........................................................... 43AN565 ........................................................... 42AN665 .........................................................195AN735 .........................................................151AN737TW ..................................................149AN742, AN743 .........................................151AN804 .........................................................153AN806 .........................................................153AN807 .........................................................154AN814 .........................................................145AN815 .........................................................155AN816 .........................................................155AN818 .........................................................156AN821 .........................................................157AN824 .........................................................158AN827 .........................................................160AN832 .........................................................160AN833 .........................................................161AN834 .........................................................161AN837 .........................................................162AN838 .........................................................162AN840 .........................................................163AN842 .........................................................163AN844 .........................................................164AN893 .........................................................164AN894 .........................................................165AN901 .........................................................199AN910 .........................................................165AN911..........................................................166AN912 .........................................................166AN914 .........................................................167AN915 .........................................................167AN916 .........................................................168AN917 .........................................................168AN918 .........................................................169AN919 .........................................................169AN924 .........................................................170AN929 .........................................................170

AN938 ........................................................ 171AN960 ...........................................................94AN970........................................................... 95AN975........................................................... 97AN6204 ..................................................... 177AN6235 ..................................................... 179AN6289 ..................................................... 171AN121501 ................................................ 108AN121502 ................................................ 108AN121503 ................................................ 108

MSMS3320 ..................................................... 139MS3367 ..................................................... 138MS3373 ..................................................... 143MS9033 ........................................................25MS9245 ..................................................... 101MS9276 ........................................................97MS9320 ........................................................97MS9321 ........................................................97MS9372 ..................................................... 130MS9385 ..................................................... 130MS9432 ........................................................ 25MS9489 ........................................................25MS9549 ........................................................95MS9556 ........................................................25MS9565 ........................................................25MS9581 ........................................................97MS9582 ........................................................97MS9696 ........................................................25MS14101 ................................................... 186MS14102 ................................................... 186MS14103 ................................................... 187MS14104 ................................................... 187MS14144 ................................................... 105MS14145 ................................................... 105MS14155 ................................................... 101MS15001(AS15001) .............................. 180MS15002(AS15002) .............................. 180MS15795 ......................................................99MS16562 ................................................... 101MS16624.................................................... 101MS16625 ................................................... 101MS16995 ......................................................41MS16996 ......................................................41MS16997 ......................................................41MS16998 ......................................................41MS17825 ................................................... 104MS17826 ................................................... 104MS18029 ................................................... 143MS20001 ................................................... 191MS20002 ......................................................95MS20004 ......................................................24MS20005 ......................................................24MS20006 ......................................................24MS20033 ......................................................26MS20034 ......................................................26MS20073 ......................................................26MS20074 ......................................................26MS20219 ................................................... 191MS20220 ................................................... 191MS20253 ................................................... 191MS20257 ................................................... 191MS20271 ................................................... 177MS20392 ......................................................18MS20426 ........................................55, 57, 58MS20427 ......................................................59

MS20470 ............................................. 56, 57, 58MS20500 .........................................................107MS20613 ........................................................... 59MS20615 ........................................................... 59MS20663 .........................................................192MS20664 .........................................................192MS20667 .........................................................192MS20668 .........................................................192MS20813 .........................................................172MS20819 .........................................................156MS20822 .........................................................157MS20823 .........................................................158MS20825 .........................................................159MS20826 .........................................................159MS20913 .........................................................172MS20995 .........................................................195MS21025 .........................................................113MS21042 .........................................................112MS21043 .........................................................112MS21044 .........................................................106MS21045 .........................................................108MS21046C ......................................................108MS21047 .........................................................119MS21048 .........................................................119MS21049 .........................................................119MS21050 .........................................................119MS21051 .........................................................119MS21052 .........................................................119MS21055 .........................................................120MS21056 .........................................................120MS21059 .........................................................120MS21060 .........................................................120MS21061 .........................................................120MS21062 .........................................................120MS21063 .........................................................117MS21069 .........................................................121MS21070 .........................................................121MS21071 .........................................................121MS21072 .........................................................121MS21073 .........................................................121MS21074 .........................................................121MS21075 .........................................................122MS21076 .........................................................122MS21078 .........................................................122MS21080 .........................................................122MS21081 .........................................................122MS21083 .........................................................106MS21086 .........................................................122MS21151 .........................................................187MS21153 .........................................................188MS21206 ........................................................... 98MS21207 ........................................................... 43MS21209 .........................................................146MS21245 .........................................................113MS21250 ........................................................... 24MS21251 .........................................................192MS21252 .........................................................193MS21254 .........................................................193MS21255 .........................................................193MS21256 .........................................................194MS21259 .........................................................193MS21260 .........................................................192MS21266 .........................................................140MS21299 ........................................................... 99MS21318 ........................................................... 43MS21900 .........................................................172




MS21902 ....................................................... 173MS21904 ....................................................... 173MS21907 ....................................................... 173MS21908 ....................................................... 173MS21913 ....................................................... 175MS21914 ....................................................... 175MS21919 ....................................................... 150MS21921 ....................................................... 176MS21922 ....................................................... 175MS22073 ....................................................... 139MS24523 ....................................................... 140MS24524 ....................................................... 140MS24566 ....................................................... 191MS24665 ....................................................... 102MS24673 & MS24674 ..................................41MS24677 & MS24678 ..................................41MS24693 ...................................................31, 32MS24693-BB ...................................................39MS24694 ...................................................33, 34MS25036 ....................................................... 142MS25041 ....................................................... 140MS25082 ....................................................... 117MS25083 ....................................................... 137MS25171 ....................................................... 138MS25223 ....................................................... 140MS25224 ....................................................... 140MS25226 ....................................................... 143MS25274 ....................................................... 138MS25281 ....................................................... 151MS26574 ....................................................... 139MS27039 ..........................................................37MS27130 ..........................................................46MS27183 ..........................................................99MS27151 ....................................................... 107MS27212 ....................................................... 143MS27488 ....................................................... 135MS27640 & MS27641 ............................... 188MS27643 & MS27645 ............................... 188MS27646 & MS27647 ............................... 189MS27975 ....................................................... 195MS27980 ....................................................... 100MS28773 & MS28774 ............................... 128MS28775 ....................................................... 127MS28776 ....................................................... 128MS28777 ....................................................... 128MS28778 ....................................................... 128MS28889 ....................................................... 177MS29512 ....................................................... 129MS29513 ....................................................... 129MS29526 ....................................................... 177MS29561 ....................................................... 130MS33737 ....................................................... 123MS35058 ....................................................... 140MS35059 ....................................................... 140MS35190 ..........................................................43MS35191 ..........................................................43MS35206 ..........................................................36MS35207 ..........................................................36MS35214 ..........................................................39MS35215 ..........................................................39MS35265 ..........................................................40MS35266 ..........................................................40MS35333 ..........................................................96MS35335 ..........................................................96MS35338 ..........................................................96MS35489 ....................................................... 126MS35649 ....................................................... 110

MS35650 ........................................................ 110MS35769 ........................................................ 199MS35842 ........................................................ 149MS51523B4 ................................................... 180MS51830 ........................................................ 146MS51831 ........................................................ 146MS51844 ........................................................ 194MS51861 ...........................................................43MS51957 & MS51958 ...................................35MS51957B & MS51958B ..............................39MS90353 ...........................................................48MS90354 ...........................................................48

NASNAS43 ............................................................. 125NAS75 ............................................................. 125NAS333 ..............................................................26NAS334 ..............................................................26NAS387 ..............................................................30NAS390 ..............................................................96NAS391 ..............................................................96NAS427 ........................................................... 195NAS428 ..............................................................26NAS446 (OLD #) ........................................... 124NAS451 (OLD #) ........................................... 100NAS509 ........................................................... 114NAS513 ........................................................... 101NAS514 ..............................................................30NAS516 ........................................................... 177NAS517 ..............................................................38NAS548 ..............................................................43NAS549 ..............................................................97NAS559 ........................................................... 194NAS560 ..............................................................27NAS577 ........................................................... 117NAS578 ........................................................... 117NAS600 thru NAS604 ...................................30NAS617 ........................................................... 131NAS620 ..............................................................98NAS623 ..............................................................36NAS624 ..............................................................24NAS625 ..............................................................24NAS626 ..............................................................24NAS679 ........................................................... 107NAS1003 ...........................................................27NAS1004 ...........................................................27NAS1022 ........................................................ 113NAS1080 ...........................................................49NAS1096 ...........................................................42NAS1097 ....................................................57, 60NAS1100 ...........................................................35NAS1101 ...........................................................40NAS1102 ...........................................................43NAS1130 ........................................................ 145NAS1149 ....................................................93, 94NAS1153 ...........................................................42NAS1169 ...........................................................95NAS1193 ........................................................ 101NAS1197 ...........................................................98NAS1200M .......................................................57NAS1202 ...........................................................27NAS1203 ...........................................................27NAS1204 ...........................................................27NAS1241 ...........................................................61NAS1242 ...........................................................61NAS1252 ...........................................................98NAS1291 ........................................................ 111

NAS1297 ...........................................................27NAS1329 ...........................................................46NAS1330 ...........................................................46NAS1351 ...........................................................41NAS1352 ...........................................................41NAS1394 ........................................................ 145NAS1395 ........................................................ 145NAS1423 ........................................................ 114NAS1436 & NAS1438 ....................................49NAS1446 & NAS1448 ....................................49NAS1456 & NAS1458 ....................................49NAS1465 & NAS1466 ....................................49NAS1468 ...........................................................49NAS1473 ........................................................ 123NAS1474 ........................................................ 123NAS1515 ...........................................................98NAS1523 ........................................................ 131NAS1564D6-4 .............................................. 177NAS1578 ...........................................................23NAS1580 ...........................................................23NAS1581 ...........................................................23NAS1587 ...........................................................99NAS1611 ........................................................ 131NAS1612 ........................................................ 131NAS1623 ...........................................................43NAS1669 & NAS1670 ....................................47NAS1750 & NAS1751 ....................................47NAS1756 .........................................................195NAS1791 ........................................................ 124NAS1801 & NAS1802 ....................................42NAS1804 & NAS1805 ................................ 115NAS1832 ........................................................ 147NAS1833 ........................................................ 147NAS1834 ........................................................ 147NAS1835 ........................................................ 148NAS1836 ........................................................ 148NAS1870 ........................................................ 123NAS1919M .......................................................51NAS1921M .......................................................51NAS1993 & NAS1994 ....................................27NAS4403 ...........................................................27NAS4404 ...........................................................27NAS4503U ........................................................28NAS4504U ........................................................28NAS4703 ...........................................................28NAS4704 ...........................................................28NAS5002 ...........................................................28NAS5003 ...........................................................28NAS5903 ...........................................................28NAS6203 & NAS6204 ....................................19NAS6205 & NAS6206 ....................................20NAS6303U ........................................................28NAS6304 ...........................................................28NAS6406 ...........................................................28NAS6408 ...........................................................28NAS6603 & NAS6604 ....................................21NAS6605 & NAS6606 ....................................22NAS6703 ...........................................................28NAS7403 ...........................................................29NAS7503 ...........................................................29NAS7703 ...........................................................29NAS8602 ...........................................................29NAS8603 ...........................................................29NAS8702 ...........................................................29NAS8703 ...........................................................29NAS8803A ........................................................29NAS9926 .........................................................115




MISC.

#PH135M Metric Nuts . . . . . . . . . ...............11618# & 28# Nicopress® Sleeve ...............19422FH Locknut ............................................11127FT Locknut ............................................11137 Series Southco® Latches .................19142FLW 12 Point Nut ................................11644P Poly-Flo® Tubing ..............................15247FLW 12 Point Nut ................................11682 Series Southco® .................................... 9185 Series Southco® .................................... 92102 Series Panel Inserts .........................144111 Series Panel Inserts .........................184127H Spacer .................................................89140-001 Washer ......................................... 97212-12 Camloc® Receptacles ................. 83214-16 Camloc® Receptacles ................. 85244-16 Camloc® Receptacles ................. 85303 Aeroquip® Hose ...............................181306 Aeroquip® Hose ...............................182471 Aeroquip® Fitting .................. 180, 182491 Aeroquip® Fitting .................. 180, 181601 & 603 Interior Washer ...................... 961271 Full Grommet ....................................891219 Snap Rings .........................................892350-18 Series Receptacle ..................... 892351-20 Series Studs ................................ 892500-18 Series Receptacle ..................... 892501-20 Series Studs ................................ 892600 Camloc® Series ................................. 832700 Camloc® Series ................................. 844002 Camloc® Series ................................. 854002 Camloc® Grommets ....................... 857274 Circuit Breakers .............................1397277 Circuit Breakers .............................13983314 thru 83321 Dykem ......................2039505 Nutsert ................................................ 4611202 & 11204 Clipnuts ........................124130007 & 130008 Clipnuts ...................118130061 & 130062 Clipnuts ...................118130068 Clipnut .........................................118294667 Clipnut .........................................118324484 thru 324486 End Splices .......137900591B-#C ...............................................18313080000 Clipnut ....................................11813100000 Clipnut ....................................118A3.5T, A5T Dzus ......................................... 89A1348 thru A1932 Tinnerman® Nuts 124A1638 Washer ............................................. 97A3135-017-193 ........................................... 95A3235-020-193 ........................................... 95A3235-028-193 ........................................... 95A3236-012-193 ........................................... 95A6195 Tinnerman® Nutplates .............124AA55487 Locking Pins ...........................194AA55488 Locking Pins ...........................194AAPQ Rivet ................................................... 52AB Marson Rivets ....................................... 45AD POP Rivets ............................................. 45AE102 Firesleeve ......................................183AJ, AJW Dzus® ............................................. 88AP50 Conical Seal ....................................180

AS O’Rings ......................................................131AS15001 & AS15002 ...................................180ADP Series Caplugs .....................................178AGC Series Fuses .........................................134AIT518 Plate Nut Drill Jigs ........................196ASC & ASP Series Caplugs ........................178BA Series Brackett Air Filters ....................179CA3105 Fairing Washer ............................... 95CA21021 & CA21024 .................................... 86CA21037 & CA21038 .................................... 86CAV & CCA Valves ........................................179CCR264 & CCR274 Rivets ............................ 52CD Series Caplugs .......................................178CR1122 Rivet ................................................... 52CR2162 & CR2163 Rivets ............................. 51CR2238 & CR2239 Rivets ............................. 51CR2245 Rivets ................................................. 51CR2248 & CR2249 Rivets ............................. 51CR2662 Rivets ................................................. 52CR2672 Rivets ................................................. 52CR3212 & CR3213 Rivets ............................. 50CR3214 Rivets ................................................. 53CR3222 & CR3223 Rivets ............................. 54CR3224 Rivets ................................................. 53CR3242 & CR3243 Rivets ............................. 50CR3245 Rivets ................................................. 53CR3252 & CR3253 Rivets ............................. 54CR3522 & CR3523 Rivets ............................. 54CR3524 Rivets ................................................. 53CR3552 & CR3553 Rivets ............................. 54CR9117 Rivets ................................................. 52CR9162 & CR9163 Rivets ............................. 52CR9179 Rivets ................................................. 53D142 .................................................................137D436 .................................................................137D1274-8-1 Tinnerman® Nut .....................124EB Nuts ............................................................116EC & EP Series Caplugs ..............................178EC Washers ...................................................... 95F22NKM ..........................................................114F22NKTM ........................................................114FJ DZUS ............................................................. 88FX10-1502 ........................................................ 87FX10-1525 ........................................................ 87FX10-1558 ........................................................ 87FX10-15009 ...................................................... 87FX10-15010 ...................................................... 87FX10-15030 ...................................................... 87GA5 Full Grommet ........................................ 89GH35 & GH5 Half Grommets ..................... 89GYN145 ............................................................107H0143 Acid Brush ........................................ 203HKP Fuse Holder ..........................................134HL10 & 11 Hi-Loks® ....................................... 77HL18 & 19 Hi-Loks® ....................................... 63HL20 & 21 Hi-Loks® ....................................... 64HL22 & 23 Hi-Loks® ....................................... 71HL30 & 40 Hi-Loks® ....................................... 72HL41 & 48 Hi-Loks® ....................................... 73HL50 & 51 Hi-Loks® ....................................... 74HL62 & 63 Hi-Loks® ....................................... 65HL64 & 65 Hi-Loks® ....................................... 66HL70, HL75, HL77 Hi-Lok® Collars ............ 79HL78, HL79, HL82 Hi-Lok® Collars ............ 80

HL84 & HL86 Hi-Lok® Collars ..................... 81HL87 & HL90 Hi-Lok® Collars ..................... 81HL93, HL94, HL97 Hi-Lok® Collars ............ 82HL93, HL94, HL97 Hi-Lok® Collars ............ 82HL110 & 111 Hi-Loks® .................................. 77HL218 & 219 Hi-Loks® .................................. 67HL218 & 219 Hi-Loks® .................................. 67HL220 & 221 Hi-Loks® .................................. 68HL325 & 326 Hi-Loks® .................................. 69HL327 & 328 Hi-Loks® .................................. 70HLT77 Hi-Lok® Collar .................................... 82HLT900 & HLT912 Hi-Loks® ........................ 76HRJ Fuse Holder ...........................................134HST10AG Hi-Loks® ......................................... 75HST11AG Hi-Loks® ......................................... 75J7444 ................................................................117KM610 ..............................................................191KFN587 ............................................................114KFN600 ............................................................114M7928/5 ..........................................................142M22759/16 Wire ..........................................137M24308/25 Male Screwlock ....................136M24308/26 Female Screwlock ................136M25988 O’Rings ...........................................130M27500 Cable ...............................................137M23053/5 Heat Shrink ...............................140M39029 Contacts ........................................135M81714 Terminal Junctions ....................136M81969 Insertion/Extraction Tool ........135M83248 O’Rings ...........................................130M83461 O’Rings ...........................................130M83519 Terminal Shield ...........................142M85052 Clamps ...........................................151MDL Series Fuses .........................................134MIL-DTL-6000 Hose ....................................183OHMSC Machine Screw .............................. 44PD & PDE Series Caplugs ..........................178PE21101-3 ........................................................ 34PR35 Right Angle Strip ................................ 90PR35-1 Flat Strip ........................................... 90PRB3.5 Receptacle ......................................... 90PFSC35 Dzus® Stud ....................................... 90QS Clamps ......................................................149R5 & RF5 Receptacles ................................... 89R35 & RF35 Receptacles .............................. 89RF5-5 & RF35-5 Spacers ............................... 89S9412 O’Ring .................................................131S4579428AD Rivets ....................................... 61SCAT & SCEET Hose ....................................183SL210 & SL211 Clip-Nuts ...........................117SL213 & SL215 Clip-Nuts ...........................117SPB, SPN, & SW Spiral Wrap .....................137SR5SS & SR35SS Snap Rings ...................... 89SX510SS & SX551SS Springs ...................... 89TC5828 Ty-Rap® Mounting Base ............141ThixOSyn & Thixo2 ...................................... 230TL800 Dzus® Latches ..................................190TP35AHT Dzus® Tool .................................... 90TP456 Taper Router Bits ............................198TP565 Drill Gauge ........................................196TPA Unibit® Drills .........................................196TPMM Strap Duplicators ...........................196TY Tie Wraps ..................................................138W23, W31, W58 Breakers ..........................139


NOTES

_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

NOTES

_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Online eStore www.aaestore.com.au

P: +61 (02) 60 262 614 E-Mail: [email protected]

Aerospace MROPrecision Manufacturing

Aerospace Parts Distribution

Australian Warehouse

Albury, NSW 2640

Full-Line Catalogue Vol. 2

Documents