full catalog

MEDICAL GRADE TUBINGFLUID TRANSFER TUBING

MEDICAL GRADEHEAT SHRINKABLE TUBING

LLIIMMIITTAATTIIOONNSS OOFF WWAARRRRAANNTTYY,, RREEMMEEDDYY,, AANNDD LLIIAABBIILLIITTYY

ICO RALLY warrants that products delivered are free from defects inmaterial and workmanship and meets all specifications, which are in effecton the date of shipment. ICO RALLY makes no other warranty expressedor implied. All specifications are subject to change without notice.

Responsibility for validity in final applications or products remains theresponsibility of the user. ICO RALLY encourages user testing, and willgladly provide standard product line samples for testing purposes.

All parties agree the Buyer’s sale and exclusive remedy shall be for therepair or replacement of any defective part provided by the Seller. Theessential purpose of this remedy shall be deemed fully satisfied as long asICO RALLY is willing to repair or replace the defective part.

In no event shall ICO RALLY’s liability under any claim exceed the pricepaid by the Buyer to ICO RALLY for the particular product, given rise tothe claim. ICO RALLY will not be liable under any circumstances for anyclaim or liability based on breach of warranty or breach of contract includ-ing but not limited to loss of income, loss of profits, loss of sales, loss ofuse or damage to equipment, increased costs of operation, labor or facil-ities, or claims by third parties.

No person(s) or company is authorized to make any oral or written repre-sentations on ICO RALLY’s behalf, which exceeds the foregoing.

ICO RALLY, ProFIT, ProTECT, ProFLO, ProMARK and all

product denoted with TM are trademarks or registeredtrademarks of ICO RALLY.

TEFLON is a registered trademark of E.I. du Pont deNemours and Company Corporation

TABLE OF CONTENTS

• All products are available double bagged and sealed. Please specify when ordering.• All products are available in pre-cut lengths.• Many products are available on plastic spools. Consult Factory.• Various products may be surface printed by Hot-Stamping or Thermal Heat Transfer.• Marking requirements that require an engraved print wheel will take longer on the

initial order.• Custom modifications such as continuous lengths or special packaging are available.• Non-standard colors are subject to Factory Quote.• Additional products, sizes, lengths, and configurations are available. Consult Factory.

Clear PVC Tubing..............................................................................

Clear Braided Reinforced PVC Hose....................................................

Clear Polyurethane Tubing .................................................................

Clear Polyurethane Braided Reinforced Hose .......................................

Translucent Silicone Tubing................................................................

Translucent Silicone Braided Reinforced Hose......................................

Medical Grade Silicone Tubing ...........................................................

Medical Grade Braided Reinforced Silicone Hose.................................

Teflon Tubing (PTFE).......................................................................

Heat Shrinkable Fluorinated Ethylene Propylene (FEP)...........................

Heat Shrinkable Teflon...............................................................................

Heat Shrinkable Polyolefin...........................................................................

Mini Heat Gun II & Heat Shrink Tubing Kit................................................

Medical Grade Heat Shrinkable Tubing.........................................

AUTO HEAT II Conveyor Heat Oven.....................................................

Nylon Barbed or Threaded Nylon Fittings.............................................

Premium Nylon Hose Clamps .............................................................

Stainless Steel Worm Gear Clamps.....................................................

2

2

3

3

4

4

5

5

6

7

8

9

9

11

11

12

13

13

Additional Products and Services

2575 East Bayshore Road, Palo Alto, California 94303-3110Telephone: 1-650-856-9900 Facsimile: 1-650-856-8378

www.icorally.com

1

10,

CLEAR PVC TUBING

• Manufactured from non-toxic ingredients conforming to FDA and USDA standards

• ProFLO® Clear PVC compound meets the requirements of USP class VI

• Glass-like clarity with smooth surface provides outstanding flow characteristics

• Does not impart taste or odor

• Flexible, lightweight, yet tough and abra-sion resistant

• Suitable for a wide variety of chemicals, gases, and liquids

• ProFLO® Clear PVC tubing may be auto-claved at 20 lbs. steam for 20 minutes

Hardness, Shore A: 68 + 5Tensile Strength: 2000 psiElongation at Break: 400%Brittle Temperature: -40°°FMaximum OperatingTemperature: 175°°F

ICO RALLYPart Number

InsideDiameter

OutsideDiameter

WallThickness

WorkingPSI at 70°°F

BurstPSI at 70°°F

IR-14000IR-14002IR-14004IR-14006IR-14008IR-14010IR-14012IR-14014IR-14018IR-14020IR-14024IR-14028IR-14030IR-14032IR-14036IR-14038IR-14040IR-14042IR-14046IR-14050IR-14052IR-14054IR-14056IR-14060IR-14064IR-14066IR-14068IR-14070IR-14072IR-14076IR-14080IR-14082IR-14084IR-14086IR-14088IR-14092IR-14096IR-14098IR-14100IR-14102

1/163/321/8 1/8

5/321/163/163/161/4 1/4 1/4

5/165/165/163/8 3/8 3/8 3/8

7/161/2 1/2 1/2 1/2

9/165/8 5/8 5/8 5/8 5/8

11/163/4 3/4 3/4 3/4 3/4 7/8 1"1"1"1"

1/8 5/323/161/4

11/323/16 5/163/8 3/8

7/161/2

7/161/2

9/161/2

9/165/8 3/4

11/165/8

11/163/4 1"3/4 3/4

13/167/8

15/161"1"7/8 1"

1-1/16"1-1/8"1-1/4"1-1/8"1-1/4"

1-5/16"1-3/8"1-1/2"

1/321/321/321/163/321/321/163/321/163/321/8

1/163/321/8

1/163/321/8

3/161/8

1/163/321/8 1/4

3/321/163/321/8

5/323/165/321/161/8

5/323/161/4 1/8 1/8

5/323/161/4

33424468733355705560705060704050656650304045664048354050494019354044443028324550

13216817627229213222028022024028020024028016020026026420012016018026416019214010020019616076

140160176176120112128180200

CLEAR BRAIDED REINFORCEDPVC HOSE • Open mesh polyester braid encapsulated

between walls of Clear ProFLO® Tubing tobecome a single hose

• Provides higher-pressure values than unreinforced ProFLO® Clear PVC tubing

• Smooth interior permits excellent flow characteristics

• Manufactured from NON-TOXIC ingredi-ents conforming to FDA standards

• Does not impart taste or ordor

• Suitable for a wide variety of chemicals, gases, and liquids



InsideDiameter

OutsideDiameter

WallThickness


BurstPSI at 70°°F

IR-14120IR-14124IR-14126IR-14128IR-14130IR-14134IR-14138IR-14140IR-14142IR-14146IR-14148IR-14150IR-14154IR-14158IR-14160IR-14164IR-14166

0.1250.1870.2500.2500.2500.3120.3750.3750.3750.5000.5000.5000.6250.7500.7501.0001.000

0.3150.3950.4360.4540.5000.5320.5750.6000.6250.7100.7280.8500.9061.0241.1251.3001.375

0.0950.1040.0930.1020.1250.1100.1000.1120.1250.1670.1140.1750.1400.1370.1870.1500.187

465315315300400280215230265190215255200150230130185

1395945945900

1200840645690795570645770600450695390555

2

CLEAR POLYURETHANE TUBING (ETHER-BASED)

• Flexible, resilient, abrasion resistant;resistant to weathering and radiation

• Suitable for a wide variety of liquids,oils, grease, and fuels

• Contains no plasticizer which cancause flow contamination or tubehardening




InsideDiameter

OutsideDiameter

WallThickness

StandardLengths


BurstPSI at 70°°F

CLEAR POLYURETHANE BRAIDEDREINFORCED HOSE (ETHER-BASED)


InsideDiameter

OutsideDiameter

WallThickness

StandardLengths


BurstPSI at 70°°F

• Polyester braiding within the wall offlexible clear polyurethane hose

• Offers greater working and burstpressures than unreinforced poly-urethane

• Flexible, resilient, abrasion resis-tant; resistant to weathering and radiation

IR-14180IR-14186IR-14188IR-14192

IR-14196IR-14198IR-14200

IR-14204

IR-14208IR-14210IR-14212

IR-14216IR-14218IR-14220

IR-14224IR-14226IR-14228

IR-14232IR-14236IR-14240

1/161/8 1/8

3/16

1/4 1/4 1/4

5/16

3/8 3/8 3/8

1/2 1/2 1/2

5/8 5/8 5/8

3/4 7/8 1"

1/8 3/161/4

5/16

5/163/8 1/2

7/16

1/2 9/165/8

5/8 11/16

3/4

3/4 13/16

7/8

1"1-1/8"1-1/4"

1/321/321/161/16

1/321/161/8

1/16

1/163/321/8

1/163/321/8

1/163/321/8

1/8 1/8 1/8

100', 500'100', 500' 100', 500' 100', 500'

100' 100', 500' 100', 500'

100'

100', 500' 100' 100'

50', 100' 50', 100' 50', 100'

50', 100' 50', 100' 50', 100'

50', 100' 50', 100' 50', 100'

13070

13070

3065

130

65

5580

100

354560

405060

503040

400215390220

95220390

195

175250300

105140180

120160180

15095

120

IR-14250IR-14256IR-14262

IR-14266IR-14270IR-14274

IR-14278IR-14282IR-14286

0.2500.3750.500

0.6250.7501.000

1.2501.5002.000

0.4700.6300.750

0.9051.0251.300

1.7101.9302.500

0.1100.1270.125

0.1400.1370.150

0.2300.2150.250

100'100'100'

100'100'100'

100'100'100'

250190150

13010080

755040

1000760600

520400320

300200160

• Suitable for a wide variety of liquids, oils, grease, and fuels

• Contains no plasticizer which can cause flow contamination or hosehardening


3

TRANSLUCENT SILICONE TUBING

• Manufactured from FDA-sanctioned ingredients

• Translucent, natural color for visual contact with flow

• Resilient, stretchable and resilient to compression set


• Ultraviolet and ozone resistant

Hardness, Shore A: 50 + 5Tensile Strength: 1100 psiElongation at Break: 375%Brittle Temperature: -100°°FMaximum OperatingTemperature: 500°°FTear Resistance: 100 ppiFlammability UL: 94HB


InsideDiameter

OutsideDiameter

WallThickness

StandardLengths


BurstPSI at 70°°F

TRANSLUCENT SILICONEBRAIDED REINFORCED HOSE


InsideDiameter

OutsideDiameter

WallThickness

StandardLengths


BurstPSI at 70°°F

• Polyester braid incorporated within the wall of silicone hose

• Manufactured from FDA-sanctioned ingredients

• Translucent, natural color for visual contact with flow

IR-14300IR-14304IR-14308IR-14310IR-14316IR-14318IR-14320IR-14322IR-14326IR-14328IR-14332IR-14334IR-14336IR-14338IR-14342IR-14344IR-14346IR-14348IR-14352IR-14354IR-14360IR-14362IR-14364IR-14366IR-14372IR-14376IR-14378IR-14380IR-14382IR-14386IR-14388IR-14390IR-14394IR-14396

1/161/163/323/321/8 1/8 1/8 1/8

5/325/323/163/163/163/161/4 1/4 1/4 1/4

5/165/163/8 3/8 3/8 3/8

7/161/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4

1/8 3/165/327/323/161/4

5/163/8

9/3211/32

1/4 5/163/8

7/165/163/8

7/161/2

7/161/2 1/2

9/165/8 3/4 5/8 5/8

11/163/4 7/8

13/167/8 1"1"

1-1/8"

1/321/161/321/161/321/163/321/8

1/163/321/321/163/321/8

1/321/163/321/8

1/163/321/163/321/8

3/163/321/163/321/8

3/163/321/8

3/161/8

3/16

100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'100'

102010151020252520205

202015105

20151010101010151055

101055

105

10

30603045306075756060156060453015604530303030304530151530301515301530

IR-14420IR-14424IR-14428IR-14432IR-14436IR-14440IR-14444IR-14448IR-14452

0.1250.1870.2500.3120.3750.5000.6250.7501.000

0.3650.4470.5200.5920.6550.8000.9651.1001.360

0.1200.1300.1350.1400.1400.1500.1700.1750.180

100'100'100'100'100'100'50'50'50'

2302152051801651401159075

695645620545495420345270225


• Ultraviolet and ozone resistant

Hardness, Shore A (Core): 70 + 5Hardness, Shore A (Cover): 60 + 5Tensile Strength: 1000 psiElongation at Break: 350%Brittle Temperature: -80°°FMaximum OperatingTemperature: 350°°F

4

5

MEDICAL GRADE SILICONE TUBING (PEROXIDE-CURED)

• Silicone elastomer compound meets USP Class VI require-ments

• Compound is non-toxic and FDA-sanctioned for use with food contact surfaces

• Odorless, tasteless, and inert

• Surface properties resist sticking and encrustation, and will not support bacteria growth

• Non-reactive to body tissues and fluids

• Translucent, natural color provides visual contact with flow

• ProFLO® Medical Grade Tubing is soft, pliable, and contains no plasticizers which could leach out, causing flow contam-ination or tube hardening

Hardness, Shore A (Core): 60 + 5Tensile Strength: 1350 psiElongation at Break: 450%Brittle Temperature: -100°°FMaximum OperatingTemperature: 400°°F


InsideDiameter

OutsideDiameter

WallThickness

StandardLengths

MEDICAL GRADE BRAIDED REINFORCEDSILICONE HOSE (PEROXIDE-CURED)


InsideDiameter

OutsideDiameter

WallThickness

StandardLengths

Workingpsi at 70°°F

Burstpsi at 70°°F

• Polyester braid incorporated within the wall of silicone hose

• Silicone elastomer compound meets USP Class VI requirements

• Compound is non-toxic and FDA-sanctioned for use with food contact surfaces

• Odorless, tasteless, and inert

IR-14600IR-14604IR-14608IR-14612IR-14616IR-14620IR-14624IR-14628

0.1250.1870.2500.3120.3750.5000.7501.000

0.3650.4470.5200.5920.6550.8001.1001.360

0.1200.1300.1350.1400.1400.1500.1750.180

25'25'25'25'25'25'25'25'

2302152051801651409075

695645620545495420270225

• Non-reactive to body tissues and fluids

• Translucent, natural color providesvisual contact with flow

• ProFLO® medical grade silicone hose contains no plasticizers which could leach out, causing flow con-tamination or tube hardening

Hardness, Shore A (Core): 70 + 5Hardness, Shore A (Cover): 60 + 5Tensile Strength: 1000 psiElongation at Break: 350%Brittle Temperature: -80°°FMaximum OperatingTemperature: 350°°F

IR-14470IR-14474IR-14478IR-14482IR-14486IR-14490IR-14494IR-14498IR-14502IR-14504IR-14508IR-14512IR-14516IR-14520IR-14522IR-14526IR-14532IR-14534IR-14540IR-14542IR-14546IR-14552IR-14554IR-14560IR-14562IR-14564IR-14570IR-14572IR-14574IR-14580IR-14584

.012

.020

.025

.0301/32.040.058.0621/161/16.0783/32.1041/81/8.1323/163/161/41/41/45/165/163/83/83/81/21/21/25/83/4

.025

.037

.047

.0655/32.085.077.0951/83/16.1257/32.1921/45/16.1835/163/83/87/161/27/161/21/29/165/85/811/163/47/81"

.007

.009

.011

.0181/16.023.010.0171/321/16.0241/16.0441/163/32.0261/163/321/163/321/81/163/321/163/321/81/163/321/81/81/8

50'50'50'50'50'50'50'50'50'50'50'50'50'50'50'50'50'50'50'25'25'25'25'25'25'25'25'25'25'25'25'

6

• Lowest coefficient of friction of any solid material

• Made without plasticizers, chemically inert

• Highest service temperature of any plastic tubing (-275°°F to 500°°F)

• Teflon® tubing can be steamed or chemicallysterilized

• Teflon® tubing's non-stick property allows for transport of viscous, sticky materialswithout line clogging

• The translucent white color of Teflon® varies naturally from lot to lot; however, thequality and physical properties do not change

Hardness, Shore A: 50 to 65Tensile Strength: 3,000 to 5,000 psiElongation at Break: 200 to 400%Brittle Temperature: -400°°FMaximum OperatingTemperature: 500°°F

TEFLON TUBINGPOLYTETRAFLUOROETHYLENE (PTFE)

TRANSLUCENT


InsideDiameter

OutsideDiameter

WallThickness

StandardPut-ups

IR-15188IR-15189IR-15190IR-15191IR-15192IR-15193IR-15194IR-15195IR-15196IR-15197IR-15198IR-15199IR-15200IR-15201IR-15202IR-15203IR-15204IR-15205IR-15206IR-15207IR-15208IR-15209IR-15210IR-15211IR-15212IR-15213IR-15214IR-15215IR-15216IR-15217IR-15218

0.1660.1660.1660.1870.1870.1870.1870.1870.2080.2080.2080.2500.2500.2500.2500.2500.3180.3180.3180.3180.3180.3750.3750.4370.4370.5000.5000.5620.5620.6250.625

0.1860.1960.2060.2070.2170.2270.2500.3120.2280.2380.2480.2700.2800.2900.3120.3750.3420.3480.3580.3750.4370.4370.4990.5000.5620.5620.6250.6250.6870.6850.750

0.0100.0150.0200.0100.0150.0200.0300.0620.0100.0150.0200.0100.0150.0200.0300.0620.0120.0150.0200.0300.0620.0300.0620.0300.0620.0300.0620.0300.0620.0300.062

100, 250100, 250100, 250100, 250100, 250100, 25050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 100


InsideDiameter

OutsideDiameter

WallThickness

StandardPut-ups

IR-15150IR-15151IR-15152IR-15153IR-15154IR-15155IR-15156IR-15157IR-15158IR-15159IR-15160IR-15161IR-15162IR-15163IR-15164IR-15165IR-15166IR-15167IR-15168IR-15169IR-15170IR-15171IR-15172IR-15173IR-15174IR-15175IR-15176IR-15177IR-15178IR-15179IR-15180IR-15181IR-15182IR-15183IR-15184IR-15185IR-15186IR-15187

0.0120.0150.0150.0180.0180.0220.0220.0220.0270.0270.0270.0310.0340.0340.0340.0420.0420.0420.0530.0530.0530.0620.0620.0660.0660.0660.0850.0850.0850.0930.1060.1060.1060.1250.1250.1250.1250.125

0.0300.0270.0330.0300.0360.0340.0400.0460.0390.0470.0510.0930.0460.0580.0660.0540.0660.0740.0650.0770.0850.1250.1870.0820.0900.0980.1010.1090.1170.1560.1220.1300.1380.1410.1550.1650.1870.250

0.0090.0060.0090.0060.0090.0060.0090.0120.0060.0100.0120.0300.0060.0120.0160.0060.0120.0160.0060.0120.0160.0300.0620.0080.0120.0160.0080.0120.0160.0300.0080.0120.0160.0080.0150.0200.0300.062

100, 1,000100, 1,000100, 1,000100, 1,000100, 1,000100, 1,000100, 1,000100, 1,000100, 1,000100, 1,000100, 1,00050, 100

100, 1,000100, 1,000100, 1,000100, 1,000100, 1,000100, 1,000100, 1,000100, 1,000100, 1,00050, 10050, 100

100, 500100, 500100, 500100, 500100, 500100, 50050, 100

100, 500100, 500100, 500100, 250100, 250100, 25050, 10050, 100

1.67:1 FRACTIONAL HEAT SHRINK SIZES

• Available in two shrink ratios of

1.3:1 (H1.3FEP) and 1.67:1 (H1.6FEP)

• Minimum shrink temperature:

410°°F (210°°C) (1” I.D. and below)

430°°F (221°°C) ( Over 1” I.D.)

0.00150.00160.0023

0.00270.00300.0031

0.00320.00390.0043

0.00480.00680.0076

0.00840.00940.0105

0.01170.01320.0180

0.00220.00240.0034

0.00400.00450.0046

0.00480.00580.0064

0.00710.01010.0113

0.01250.01400.0156

0.01740.01960.0268

0.008 +/- 0.0020.008 +/- 0.0020.008 +/- 0.002

0.008 +/- 0.0020.009 +/- 0.0020.009 +/- 0.002

0.009 +/- 0.0020.010 +/- 0.0030.010 +/- 0.003

0.010 +/- 0.0030.011 +/- 0.0040.011 +/- 0.004

0.011 +/- 0.0040.011 +/- 0.0040.011 +/- 0.004

0.012 +/- 0.0040.012 +/- 0.0040.012 +/- 0.004

0.203 +/- 0.0510.203 +/- 0.0510.203 +/- 0.051

0.203 +/- 0.0510.229 +/- 0.0510.229 +/- 0.051

0.229 +/- 0.0510.254 +/- 0.0760.254 +/- 0.076

0.254 +/- 0.0760.279 +/- 0.1020.279 +/- 0.102

0.279 +/- 0.1020.279 +/- 0.1020.279 +/- 0.102

0.305 +/- 0.1020.305 +/- 0.1020.305 +/- 0.102

ApproximateWeight

H1.3FEP-24H1.3FEP-22H1.3FEP-20






0.0270.0320.039

0.0490.0610.072

0.0890.1140.124

0.1430.1580.180

0.1980.2260.249

0.2800.3110.349

0.690.810.99

1.251.551.83

2.262.903.15

3.634.014.57

5.035.746.32

7.117.908.86

0.0310.0360.045

0.0600.0750.092

0.1150.1410.158

0.1800.1970.225

0.2480.2900.310

0.3650.4000.440

0.780.911.14

1.521.912.34

2.923.584.01

4.575.005.72

6.307.377.87

9.2710.2011.20

lb/ft kg/m

H1.3FEP-3/8H1.3FEP-7/16H1.3FEP-1/2

H1.3FEP-5/8H1.3FEP-3/4

H1.3FEP-7/8H1.3FEP-1”

0.02330.03660.0400

0.06310.0929

0.12660.1439

0.03470.05450.0595

0.09390.1382

0.18840.2141

0.015 +/- 0.0040.020 +/- 0.0040.020 +/- 0.004

0.025 +/- 0.0040.030 +/- 0.004

0.035 +/- 0.0040.035 +/- 0.004

0.381 +/- 0.1020.508 +/- 0.1020.508 +/- 0.102

0.635 +/- 0.1020.762 +/- 0.102

0.889 +/- 0.1020.889 +/- 0.102

0.3830.4480.510

0.6370.764

0.8911.020

9.7311.4013.00

16.2019.40

22.6025.90

0.5000.5800.666

0.8301.000

1.1701.330

12.7014.7016.90

21.1025.40

29.7033.78

1.3:1 AWG HEAT SHRINK SIZES

1.3:1 FRACTIONAL HEAT SHRINK SIZES

0.00450.00460.00580.0086

0.01400.02830.0540

0.06390.12600.2200

0.00660.00680.00860.0127

0.02070.04180.0797

0.09430.18600.3248

0.008 +/- 0.0030.010 +/- 0.0030.010 +/- 0.0020.010 +/- 0.002

0.012 +/- 0.0020.015 +/- 0.0040.020 +/- 0.004

0.025 +/- 0.0050.030 +/- 0.0050.030 +/- 0.005

0.203 +/- 0.0760.254 +/- 0.0760.254 +/- 0.0760.254 +/- 0.076

0.305 +/- 0.0760.381 +/- 0.1020.508 +/- 0.102

0.635 +/- 0.1270.762 +/- 0.1270.762 +/- 0.127

H1.6FEP-3/32H1.6FEP-1/8H1.6FEP-3/16H1.6FEP-1/4

H1.6FEP-3/8H1.6FEP-1/2H1.6FEP-3/4

H1.6FEP-1”H1.6FEP-1-1/2H1.6FEP-2”

0.0560.0750.1150.150

0.2250.3000.450

0.6000.9001.200

1.421.912.923.81

5.727.62

11.43

15.2422.8630.48

0.0930.1250.1880.250

0.3750.5000.750

1.0001.5002.000

2.363.184.766.35

9.5312.7019.05

25.4038.1050.80

HEAT SHRINKABLEFLUORINATED ETHYLENE PROPYLENE (FEP)

7

Inside DiameterMinimum

as suppliedProduct

DescriptionWall Thickness Maximum

after heating

Inside DiameterMaximum

after heating

• Provided in 4-foot lengths or coils

• Standard color is translucent

• Can be used with virtually all

industrial chemicals, solvents, and

other corrosive materials.

in mm in mmin mm

APPLICATIONSHFEP has the performancecharacteristics of Teflon®, butnearly half the recovery tem-perature. HFEP is ideal in tem-perature sensitive applicationswhere a high strength tubingproduct with excellent chemi-cal/solvent resistance andhigh abrasion resistance isrequired.

HEAT SHRINKABLE TEFLON

THIN WALL

0.0090.0090.0090.010

0.0100.0120.012

0.0120.0120.012

0.0120.0150.015

0.0150.0150.015

(0.23)(0.23)(0.23)(0.25)

(0.25)(0.30)(0.30)

(0.30)(0.30)(0.30)

(0.30)(0.38)(0.38)

(0.38)(0.38)(0.38)

HTX-30HTX-28HTX-26HTX-24

HTX-22HTX-20HTX-18

HTX-16HTX-14HTX-12

HTX-10HTX-8HTX-6

HTX-4HTX-2HTX-0

0.0150.0180.0220.027

0.0320.0390.049

0.0610.0720.089

0.1120.1410.178

0.2240.2780.347

(0.38)(0.46)(0.56)(0.69)

(0.81)(0.99)(1.24)

(1.55)(1.83)(2.26)

(2.84)(3.58)(4.52)

(5.69)(7.06)(8.81)

0.0340.0380.0460.050

0.0550.0600.076

0.0930.1200.150

0.1910.2400.302

0.3700.4300.470

(0.86)(0.97)(1.17)(1.27)

(1.40)(1.52)(1.93)

(2.36)(3.05)(3.81)

(4.85)(6.10)(7.67)

(9.40)(10.92)(11.94)

STANDARD WALL

0.0120.0120.016

0.0160.0160.016

0.0160.0160.016

0.0160.0160.020

0.0200.0200.020

0.0200.0200.020

0.0200.0200.020

(0.30)(0.30)(0.41)

(0.41)(0.41)(0.41)

(0.41)(0.41)(0.41)

(0.41)(0.41)(0.51)

(0.51)(0.51)(0.51)

(0.51)(0.51)(0.51)

(0.51)(0.51)(0.51)

HSX-24HSX-22HSX-20

HSX-18HSX-16HSX-15

HSX-14HSX-13HSX-12

HSX-11HSX-10HSX-9

HSX-8HSX-7HSX-6

HSX-5HSX-4HSX-3

HSX-2HSX-1HTX-0

0.0270.0320.039

0.0490.0540.067

0.0720.0800.089

0.1010.1120.124

0.1410.1580.178

0.1980.2240.249

0.2780.3110.347

(0.69)(0.81)(0.99)

(1.24)(1.37)(1.70)

(1.83)(2.03)(2.26)

(2.57)(2.84)(3.15)

(3.58)(4.01)(4.52)

(5.03)(5.69)(6.32)

(7.06)(7.90)(8.81)

0.0500.0550.060

0.0760.0850.110

0.1200.1300.150

0.1700.1910.205

0.2400.2700.302

0.3200.3700.390

0.4300.4500.470

(1.27)(1.40)(1.52)

(1.93)(2.16)(2.79)

(3.05)(3.30)(3.81)

(4.32)(4.85)(5.21)

(6.10)(6.86)(7.67)

(8.13)(9.40)(9.90)

(10.92)(11.43)(11.94)

4X FRACTIONAL SIZES

0.0090.0100.012

0.0120.0150.015

0.0150.0150.015

(0.23)(0.25)(0.30)

(0.30)(0.38)(0.38)

(0.38)(0.38)(0.38)

HFX-5/64HFX-1/8HFX-1/4

HFX-3/8HFX-1/2HFX-5/8

HFX-3/4HFX-1”HFX-1-1/4

0.0250.0370.063

0.0960.1440.178

0.2240.2780.347

(0.64)(0.94)(1.60)

(2.44)(3.66)(4.52)

(5.69)(7.06)(8.81)

0.0780.1250.250

0.3750.5000.625

0.7501.0001.250

(1.98)(3.18)(6.35)

(9.53)(12.70)(15.88)

(19.05)(25.40)(31.75)

APPLICATIONSTeflon tubing is primarily foruse in high thermal and diffi-cult environmental applica-tions, or where a low coeffi-cient of friction is required.Teflon provides excellentelectrical insulation and hasexcellent chemical and sol-vent resistance.

• Tough, semi-rigid, thin-wall construction

• Available in shrink ratios of1.5:1 (HSX,HTX) and 4:1 (HFX)

• Longitudinal shrinkage is less than 10%

• Standard Operating Temperature:-100°°F to 500°°F (-75°°C to 260°°C)

• Minimum shrink temperature: 500°°F (350°°C)

• Provided in 4-foot lengths

• Standard color is natural

• A 750°°F heat gun is recommended

8


as supplied (mm)Product

Description


after heating (mm)

Wall ThicknessMaximum

after heating (mm)



Description


after heating (mm)


after heating (mm)



Description


after heating (mm)


after heating (mm)

WARNINGCaution should be exercisedwhen heat shrinking Teflon.The excessive heat requiredfor shrinking can do damageto heat sensitive solder jointsor parts being covered.

HIX-3/64HIX-1/16HIX-3/32HIX-1/8

HIX-3/16HIX-1/4HIX-3/8

HIX-1/2HIX-3/4HIX-1”

HIX-1-1/4HIX-1-1/2HIX-2

HIX-3HIX-4HIX-5

0.0230.0310.0460.063

0.0930.1250.188

0.2500.3750.500

0.6250.7501.000

1.5002.0002.500

(0.58)(0.79)(1.17)(1.60)

(2.36)(3.18)(4.76)

(6.35)(9.53)

(12.70)

(15.88)(19.05)(25.40)

(38.10)(50.80)(63.50)

0.0460.0630.0930.125

0.1880.2500.375

0.5000.7501.000

1.2501.5002.000

3.0004.0005.000

(1.17)(1.60)(2.36)(3.18)

(4.76)(6.35)(9.53)

(12.70)(19.05)(25.40)

(31.75)(38.10)(50.80)

(76.20)(101.60)(127.00)

100, 200100, 200100, 200100, 200

100, 200100100

20, 10020, 10020, 48

20, 4820, 48

20

8, 248, 24

8

0.0160.0170.0200.020

0.0200.0250.025

0.0250.0300.035

0.0400.0400.045

0.0500.0550.060

(0.40)(0.43)(0.50)(0.50)

(0.50)(0.63)(0.63)

(0.63)(0.76)(0.89)

(1.01)(1.01)(1.14)

(1.27)(1.40)(1.52)

HIX6-3/64HIX6-1/16HIX6-3/32HIX6-1/8

HIX6-3/16HIX6-1/4HIX6-3/8

HIX6-1/2HIX6-3/4HIX6-1”

HIX6-1-1/4HIX6-1-1/2HIX6-2

HIX6-3HIX6-4N/A

40363228

242016

14128

653

21

N/A

10001000500500

500250200

150250250

100125125

505050

9

HEAT SHRINKABLE POLYOLEFIN

APPLICATIONSHIX is the most popular gen-eral purpose heat-shrinkabletubing used for insulating,jacketing, bundling, and iden-tification. HIX is mechanicallytough and has good abrasionand solvent resistance.Longitudinal shrinkage is lessthan 6%.

• Standard Operating Temperature:-55°°C to 135°°C

• 2:1 shrink ratio

• Minimum shrink temperature: 121°°C

• Provided in 4-foot, or 6-inch lengths, or on spools

• Standard colors are black, white, red, blue, yellow, green, and clear

MINI HEAT GUN II®® & HEAT SHRINK TUBING KIT



Description


after heating (mm)


after heating (mm)

Product Description

(6” pcs.)

*Std. 4-ftLengthsft / pkg

Std.Spools

ft / spool

Std. 6-inLengths

pcs / pkg

The MMIINNII HHEEAATT GGUUNN IIII is ICO RALLY’s most compact andlightweight UL Recognized heat gun. Powered by stan-dard 110V AC power, it boasts a nozzle temperature of610°F. When not in use, you can hang the MMIINNII HHEEAATTGGUUNN IIII out of your way with its convenient workbenchstorage loop.

The heat gun is sold as a kit with 60, six-inch pieces of ourmost popular HIX heat shrink tubing. Sizes include 1/8”,3/16”, 1/4”, 3/8”, and 1/2” (assorted colors).

The ICO RALLY part number for the MMIINNII HHEEAATT GGUUNN IIII &Heat Shrink Tubing Kit is IR-25252.


as supplied (mm)


BlackProduct

Description


after heating (mm)


after heating (mm)

MEDICAL GRADE HEAT SHRINKABLE TUBINGHSMG-C

(HIGH-TEMPERATURE FLUOROPOLYMER)

APPLICATIONSDesigned for electrical insula-tion and strain relief of components that are exposedto high temperatures duringactual performance or sterili-zation. All sizes are manu-factured with a thin-wall construction for applicationswhere space between components is minimal.

• Tough, flexible, very-thin-wall con-struction


• Conforms to USP Class VI, no heavymetals

• Compatible with autoclave (limited cycles), gamma, ETO, and dry heatsterilization



• Provided in cut pieces, coils, or onplastic spools.

IR-15230IR-15234IR-15238IR-15242IR-15246IR-15250IR-15254

HSMG-C-1/16"HSMG-C-3/32"HSMG-C-1/8"HSMG-C-3/16"HSMG-C-1/4"HSMG-C-3/8"HSMG-C-1/2"

0.063 (1.6) 0.093 (2.4)0.125 (3.2)0.187 (4.7)0.250 (6.4)0.375 (9.5)0.500 (12.7)

0.031 (0.8)0.046 (1.2)0.062 (1.6)0.093 (2.4)0.125 (3.2)0.187 (4.7)0.250 (6.4)

0.010 (0.25)0.010 (0.25)0.010 (0.25)0.010 (0.25)0.012 (0.30)0.012 (0.30)0.012 (0.30)


as supplied (mm)

ICO RALLYPart NumberTranslucent

Product Description


after heating (mm)


after heating (mm)

MEDICAL GRADE HEAT SHRINKABLE TUBINGHSMG-A

(HIGH-TEMPERATURE, SEMI-RIGID FLUOROPOLYMER)

APPLICATIONSDesigned for electrical insula-tion and strain relief of components that are exposedto high temperatures duringactual performance or sterili-zation. All sizes are manu-factured with a thin-wall construction for applicationswhere space between components is minimal.

• Tough, semi-rigid, thin-wall con-struction



• Compatible with autoclave, gamma,ETO, steam, and dry heat sterilization



• Provided in cut pieces or multiples of 4-foot lengths

IR-15258IR-15260IR-15262IR-15264IR-15268IR-15270IR-15272

HSMG-A-1/16"HSMG-A-3/32"HSMG-A-1/8"HSMG-A-3/16"HSMG-A-1/4"HSMG-A-3/8"HSMG-A-1/2"

0.063 (1.6) 0.093 (2.4)0.125 (3.2)0.187 (4.7)0.250 (6.4)0.375 (9.5)0.500 (12.7)

0.031 (0.8)0.046 (1.2)0.062 (1.6)0.093 (2.4)0.125 (3.2)0.187 (4.7)0.250 (6.4)

0.010 (0.25)0.010 (0.25)0.010 (0.25)0.010 (0.25)0.013 (0.33)0.013 (0.33)0.013 (0.33)

10

• Flexible, also available in colors, subject to minimums



• Compatible with gamma and ETOsterilization



• Provided in cut pieces, coils, or onplastic spools.

MEDICAL GRADE HEAT SHRINKABLE TUBINGHSMG-E

(FLEXIBLE POLYOLEFIN TUBING)

APPLICATIONSDesigned for electro-surgicalinstruments requiring excel-lent electrical insulation andresistance to abrasion andharmful solvents. Also usedfor strain relief, color-coding,and identification of medicalcomponents and devices.


as supplied (mm)


Clear


BlackProduct

Description


after heating (mm)

IR-15280IR-15290IR-15300IR-15310IR-15320IR-15330IR-15340

IR-15380IR-15390IR-15400IR-15410IR-15420IR-15430IR-15440

HSMG-E-1/16"HSMG-E-3/32"HSMG-E-1/8"HSMG-E-3/16"HSMG-E-1/4"HSMG-E-3/8"HSMG-E-1/2"

0.063 (1.6) 0.093 (2.4)0.125 (3.2)0.187 (4.7)0.250 (6.4)0.375 (9.5)0.500 (12.7)

0.031 (0.8)0.046 (1.2)0.062 (1.6)0.093 (2.4)0.125 (3.2)0.187 (4.7)0.250 (6.4)

0.017 (0.43)0.020 (0.51)0.020 (0.51)0.020 (0.51)0.025 (0.64)0.025 (0.64)0.025 (0.64)


after heating (mm)

APPLICATIONS

Shrinking thermally reactivepolymer tubing.

Re-flowing solder pastesduring the production ofSurface Mount Technology onprinted circuit boards.

Accelerating the curing ordrying of epoxies, adhesives,and coatings.

Maximum temperature 350°°CMaximum belt speed 25 feet/minute.

ICO RALLY’s AUTO HEAT II conveyor ovens offer an economical system designed and engineered to address the manyheat-process requirements of today’s industry. These ovens provide a particular value in laboratory, prototype, low-to-medium volume production operations.

Items processed through AUTO HEAT II OVENS are surrounded by a 360-degree thermal wash, exposing all surfaces toidentical temperatures evenly and consistently throughout the length of the process tunnel.

AUTO HEAT II OVENS are manufactured clean room ready. External surfaces are sealed with an easy-to-clean epoxycoating. Internal surfaces, as well as conveyor belts, rollers, gears, and blower sleeves, are stainless steel. All seams aresealed with a high-termperature RTV compound.

11

• Precision molded from glass-fiber reinforced nylon

• Lightweight, compact, easy to install and connect

• High impact strength

• Excellent chemical resistance

Brittle Temperature: -40°°FMaximum OperatingTemperature: 200°°F

NYLON BARBED FITTINGSTHREADED NYLON PIPE FITTINGS



HoseI.D.

HoseI.D.

NationalPipe Thrd.

NationalPipe Thrd.


HoseI.D. (L)

NationalPipe Thrd.

HoseI.D. (R)

Male Elbow Male Adapter Male Tee

Barbed Elbow Barbed Connector

Barbed Tee


HoseI.D. (L)

HoseI.D. (R)

HoseI.D. (C)


HoseI.D. (L)

HoseI.D. (C)


HoseI.D.

IR-15020IR-15022IR-15026IR-15028IR-15030IR-15036IR-15038IR-15042IR-15044IR-15046IR-15048IR-15050IR-15054IR-15056IR-15058IR-15060IR-15064IR-15066IR-15068IR-15072IR-15074IR-15078IR-15080IR-15082

3/163/161/4 1/4 1/4

5/165/163/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 1"1"1"

1/8 1/4 1/8 1/4 3/8 1/4 3/8 1/8 1/4 3/8 1/2 3/4 1/4 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4 1/2 3/4 1"

IR-14830IR-14834IR-14838IR-14842IR-14846IR-14850IR-14854

1/8 3/161/4

5/163/8 1/2 3/4

IR-14866IR-14874IR-14878IR-14880IR-14882IR-14886IR-14892IR-14896IR-14900IR-14904IR-14908IR-14912

1/8 3/161/4 1/4 1/4

5/163/8 1/2 1/2 5/8 3/4 1"

1/8 3/161/4 3/8 1/2

5/163/8 3/8 1/2 5/8 3/4 1"

1/8 3/161/4 3/8 1/2

5/163/8 3/8 1/2 5/8 3/4 1"

IR-14950IR-14952IR-14956IR-14958IR-14960IR-14966IR-14968IR-14972IR-14974IR-14976IR-14978IR-14980IR-14984IR-14986IR-14988IR-14990IR-14994IR-14996IR-15000IR-15002IR-15006IR-15008IR-15010

3/163/161/4 1/4 1/4

5/165/163/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 3/4 3/4 1"1"1"

1/8 1/4 1/8 1/4 3/8 1/8 1/4 1/8 1/4 3/8 1/2 3/4 1/4 3/8 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1"

IR-15090IR-15092IR-15096IR-15098IR-15100IR-15104IR-15106IR-15112IR-15114IR-15116IR-15120IR-15124

3/163/161/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 1"

1/8 1/4 1/8 1/4 3/8 1/4 3/8 1/4 3/8 1/2 3/4 3/4

3/163/161/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 1"

IR-14800IR-14804IR-14808IR-14810IR-14812IR-14816IR-14820IR-14824

1/4 3/8 1/2 1/2 1/2 5/8 3/4 1"

1/4 3/8 1/4 3/8 1/2 5/8 3/4 1"

12

PREMIUM NYLONHOSE CLAMPS

STAINLESS STEELWORM GEAR CLAMPS


DescriptionColor: White

Inside DiameterClamping Range

Min. (A) Max. (A)

ProfileWidth

(B)

ProfileThickness

(C)


DescriptionAll Stainless

Inside DiameterClamping Range

Min. (A) Max. (A)

ProfileWidth

(B)

ProfileThickness

(C)

IR-14640IR-14642IR-14644IR-14646IR-14648IR-14650IR-14652IR-14654IR-14656IR-14658IR-14660IR-14662IR-14664IR-14666IR-14668IR-14670IR-14672

NHC-1/4" NHC-5/16"NHC-3/8"NHC-7/16"NHC-1/2"NHC-9/16"NHC-5/8"NHC-11/16"NHC-3/4"NHC-7/8"NHC-1"NHC-1-1/8"NHC-1-5/16"NHC-1-1/2"NHC-1-11/16"NHC-1-7/8"NHC-2"

.246

.300

.360

.410

.475

.538

.597

.670

.730

.870

.9531.0311.2501.4061.5931.7901.870

.290

.350

.406

.468

.536

.608

.665

.780

.830

.9751.0931.1871.4251.6101.8122.1102.125

.218

.218

.218

.250

.218

.250

.250

.218

.218

.218

.250

.312

.312

.343

.343

.343

.406

.062

.046

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

IR-14680IR-14682IR-14684IR-14688IR-14690IR-14692IR-14694IR-14696IR-14698IR-14700IR-14702IR-14704IR-14706IR-14710

SSHC-3/8"SSHC-1/2"SSHC-9/16"SSHC-5/8"SSHC-5/8"SSHC-3/4"SSHC-3/4"SSHC-1"SSHC-1"SSHC-1-1/4"SSHC-1-1/4"SSHC-1-1/2"SSHC-2"SSHC-3"

.250

.437

.500

.562

.562

.687

.687

.937

.9371.1871.1871.2501.5622.562

.625

.687

.9061.0621.0621.2501.2501.5001.5001.7501.7502.0002.5003.500

.312

.312

.312

.312

.562

.312

.562

.312

.562

.312

.562

.562

.562

.562

.022/.024

.022/.024

.022/.024

.022/.024

.021/.023

.022/.024

.021/.023

.022/.024

.021/.023

.022/.024

.021/.023

.021/.023

.021/.023

.021/.023

Premium Nylon Hose Clamps provide asuperior seal on hose or tubing products through an interlocking design.

As the interlocking grooves are ratchetedtogether, the clamping diameter of thefastener is aligned in parallel, creating auniform clamping surface.

Clamps may be removed by separatingthe clamping halves in a perpendiculardirection at the seal.

Standard worm drive construction.Slotted Hex Head Screw.

BAND: AISI Type 301 Stainless SteelHOUSING: AISI Type 301 Stainless SteelSCREW: AISI Type 305 Stainless Steel

Passive

13

DISTRIBUTED BY:

Cat. No. 07/05 BC

ICO RALLY2575 East Bayshore RoadPalo Alto, California 94303-3210Telephone 1-650-856-9900Facsimile 1-650-856-8378www.icorally.com

Please contact your ICO RALLY representative for additional information.

full catalog

Documents

additional products

various products

reinforced silicone

ico rallys liability

medical grade silicone

ico rallys behalf

long asico rally

reinforced pvc hose