FREUDENBERG FCCT KG Höhner Weg 2-4, 69465 Weinheim, Germany, www.freudenbergfcct.com FAX +49 6201 88 4489 E-MAIL fuelcell @ freudenberg.de CONTACT FREUDENBERG FCCT KG YOUR ADVANTAGES n Engineered profile seal beads optimized for low compression forces n Ability to compensate tolerances n Rapid gasket design change n Secure in-house fuel cell stack development n Ideal prototype sealing solution for single cells or stacks n No moulding tool investment necessary n Application of latest fuel cell compatible seal materials FREUDENBERG ICE CUBE SEALING FREUDENBERG’S LOW-COST ANSWER TO PROVIDE A QUICK, PROTOTYPE-LEVEL, ENGINEERED SEALING SOLUTION. For operation temperature to 120° C: n Polyolefin 35 FC - PO 100 or n Silicone 43 FC - LSR 100 For temperatures up to 200° C: n 65 FC - FKM 100 or n 60 FC - FKM 200 n 400 x 300 mm n 0.35 mm n 0.50 mm n 0.80 mm n other thicknesses on request Thickness tolerance of sheet +/- 0.05 mm n standard minimum seal width is 4 mm n for smaller seal width please contact us FUEL CELL APPLICABLE SEAL MATERIALS MAXIMUM AVAILABLE SIZES AVAILABLE THICKNESSES RECOMMENDED SEAL WIDTH Ice Cube sealing design made of 35 FC - PO 100
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Freudenberg FCCT Kg Höhner Weg 2 -4, 69465 Weinheim, Germany, www.freudenbergfcct.com FAX +49 6201 88 4489 e-MAIL fuelcell @ freudenberg.de
COnTACT
Freudenberg FCCT Kg
YOur AdvAnTAges
n Engineered profile seal beads optimized for low compression forcesn Ability to compensate tolerancesn Rapid gasket design changen Secure in-house fuel cell stack developmentn Ideal prototype sealing solution for single cells or stacksn No moulding tool investment necessaryn Application of latest fuel cell compatible seal materials
Freudenberg ICe Cube seALIng
Freudenberg’s LOw-COsT Answer TO prOvIde
A quICK, prOTOTYpe-LeveL, engIneered seALIng sOLuTIOn.
For operation temperature to 120° C: n Polyolefin 35 FC - pO 100 or n Silicone 43 FC - Lsr 100
For temperatures up to 200° C: n 65 FC - FKM 100 or n 60 FC - FKM 200
n 400 x 300 mm
n 0.35 mm n 0.50 mm n 0.80 mmn other thicknesses on request Thickness tolerance of sheet +/- 0.05 mm
n standard minimum seal width is 4 mmn for smaller seal width please contact us
FueL CeLL AppLICAbLe seAL MATerIALs
MAXIMuM AvAILAbLe sIzes
AvAILAbLe ThICKnesses
reCOMMended seAL wIdTh
Ice Cube sealing design made of 35 FC - PO 100
COnTACT
Freudenberg FCCT Kg
COMpArIsOn OF ICe Cube seALIng And FLAT seALIng deFOrMATIOn
MATerIAL 35 FC - pO 100
ICe Cube seALIng
MATerIAL 35 FC - pO 100
ICe Cube seALIng
MATerIAL 60 FC - FKM 200
reALIzIng LOw COMpressIOn FOrCes – see deFOrMATIOn Curves beLOw
All values represent averages which are subject to normal production tolerances. The given values are based on a limited number of tests on standard test pieces (2 mm sheets) produced in the laboratory. The data from finished parts can deviate from above values depending on the manufactories process and the component geometry. The data represents our present empirical values. It is incumbent on the person placing the order to examine whether it is suitable for its intended purpose, before using the product. All questions regarding the guarantee of this product are in line with our terms and conditions, inasmuch as statutory provisons do not plan for something else.
Freudenberg ICe Cube seALIng
Freudenberg’s LOw-COsT Answer TO prOvIde
A quICK, prOTOTYpe-LeveL, engIneered seALIng sOLuTIOn.
ICE C
UB
E 1
24300
pressure [Mpa]
900
800
700
600
500
400
300
200
100
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Thic
kne
ss [
µm]
pressure [Mpa]
0.80 mm
0.50 mm
0.35 mm
Freudenberg FCCT Kg Höhner Weg 2 -4, 69465 Weinheim, Germany, www.freudenbergfcct.com FAX +49 6201 88 4489 e-MAIL fuelcell @ freudenberg.de