EPD Nº Registro: S-P-00811 DECLARACIÓN AMBIENTAL PRODUCTO ® ABN INSTAL CT FASER RD Ficha técnica Technical data sheet 01/2021 V.2 SISTEMA DE TUBERÍAS PARA INSTALACIONES HIDROSANITARIAS PIPING SYSTEM FOR HIDRAULIC LINES UNE 100030
EPDNº Registro: S-P-00811DECLARACIÓNAMBIENTALPRODUCTO
®
ABN INSTAL CT FASER RD Ficha técnicaTechnical data sheet
01/2021V.2
SISTEMA DE TUBERÍAS PARA INSTALACIONES HIDROSANITARIASPIPING SYSTEM FOR HIDRAULIC LINES
UNE 100030
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Reglamentos y normativas |
El producto |
Usos principales | Main uses
Ventajas | Benefits
Características diferenciadoras | Differentiating features
Lugares de aplicación | Application sites
Gama de producto | Product range
Tipos de unión | Joining techniques
Accesorios | Fittings
Valores técnicos | Technical data
Valores ambientales | Environmental data
Normas | Standards
Certificados | Approvals
Aplicaciones de la normativa | Application of standards
Información complementaria | Additional information
Standards and regulations
The product
Índice I Table of contents
La gama de producto ABN//INSTAL CT FASER RD cumple las exigencias de los reglamentos y normas que le son de aplicación en las instalaciones hidrosanitarias.
The ABN // INSTAL CT FASER RD product range complies with the the regulations and standards that apply to hydraulic lines.
Prevención y control de la proliferación y
diseminación de Legionella en instalaciones.
UNE 100030
R.D.140Criterios Sanitarios de la
Calidad del Agua deConsumo Humano
R.D.865Criterios higiénico-sanitarios
para la prevención y control de la legionelosis
R.D.314/2006R.D.732/2019
R.D.1027/2007R.D.1826/2009R.D. 238/2013RITE 2019 (propuesta de modificación)
R.D.140/2003 R.D.865/2003
UNE 100030/2017
REGLAMENTOS Y NORMATIVAS REGULATIONS AND STANDARDS
Descripción tipo Text for tenders
EL PRODUCTO | THE PRODUCT
Ficha técnica ABN//INSTAL CT FASER RD | 01/2021Technical data sheet ABN//INSTAL CT FASER RD V2
TUBO POLIPROPILENO PP RCT FASER RD
Tubería ABN//INSTAL CT Faser RD, libre de halógenos, fabricada en PPR CT XP multicapa, para agua fría, A.C.S., calefacción y climatización, resistente a los procesos de desinfección, aditivo antimicrobiano, protección anti-incrustaciones, microfibras anti-dilataciones y protección UV. Serie ----, SDR ----, de diámetro exterior --- mm y espesor --- mm. Capa interna
y capa externa color verde RAL 6024 con banda blanca RAL 9003. I/p.p. codos, tes y demás accesorios. 100% ecológico, reciclable, con Declaración Ambiental de Producto (DAP),
y certificado por AENOR tubería, accesorios y sistema. Instalado según normativa vigente.
color blanco RAL 9003
clasificación ORO con el certificado C2C (CRADLE TO CRADLE)
PP RCT FASER RD POLYPROPYLENE PIPE
ABN // INSTAL CT Faser RD pipe, halogen free, manufactured in multi-layer PPR CT XP, for potable water application, heating and air-conditioning systems, resistant to disinfection processes, with antimicrobial additive, anti-incrustation protection, microfibers that prevent lineal expansion and UV protection. ---- series, SDR ----, external diameter of --- mm and thickness of --- mm. White internal layer and external layer with white strips. Proportional share of bends, t-pieces. 100% ecological and recyclable, with Environmental Product Declaration (EPD), GOLD classification with C2C certificate (CRADLE TO CRADLE) and Certificate of Compliance by AENOR for pipes, fittings and systems. Installed as standards.
green RAL 6024
Capa externa color verde RAL 6024 con bandas blancas RAL 9003 en PPR CT XP, resistente a los rayos UV. External layer in green RAL 6024 with white strips RAL 9003, manufactured in PPR CT XP, resistant to UV.
Capa interna color blanco RAL 9003 en PPR CT XP con aditivo resistente a la desinfección, anti-incrustaciones y antimicrobiano.
Internal layer in white RAL 9003 manufactured in PPR CT XP with a resistant to disinfection, anti-fouling and antimicrobial additive.
Capa intermedia color gris RAL 7042 en PPR CT XP con microfibras anti-dilatación.Intermediate layer in silver RAL 7042 manufactured in PPR CT XP with anti-expansion microfibers.
1
2
3
1
2
3
REDES DE DISTRIBUCIÓN DE AGUA FRÍA Y A.C.S.POTABLE WATER APPLICATION
REDES DE CLIMATIZACIÓNAIR CONDITIONING SYSTEMS
INSTALACIONES DE FLUIDOS A ALTAS Y BAJAS TEMPERATURASFLUIDS AT HIGH AND LOW TEMPERATURES FOR INDUSTRY
SISTEMAS DE CALEFACCIÓNHEATING SYSTEMS
USOS PRINCIPALES І MAIN USES
VENTAJAS | BENEFITS
CARACTERÍSTICAS DIFERENCIADORAS | DIFFERENTIATING FEATURES
LUGARES DE APLICACIÓN | APPLICATION SITES
+ +
HF
UV
MAYOR RESISTENCIA A LA TEMPERATURA Y PRESIÓN HIGHER RESISTANCE TO TEMPERATURE AND PRESSURE
BAJA CONDUCTIVIDAD TÉRMICALOW THERMAL CONDUCTIVITY
LIGEREZALIGHTNESS
RESISTENCIA A LA CORROSIÓNCORROSION RESISTANCE
MAYOR SECCIÓN HIDRAÚLICAGREATER HYDRAULIC SECTION
ECONÓMICO Y EFICIENTEECONOMIC AND EFFICIENT
LIBRE DE HALÓGENOSHALOGEN FREE
RESISTENCIA A LOS PROCESOS DE DESINFECCIÓNRESISTANCE TO DISINFECTION PROCESSES
PROTECCIÓN ANTIMICROBIANAANTIMICROBIAL PROTECTION
MICRO FIBRAS ANTI DILATACIÓNANTI-EXPANSION MICRO-FIBERS
CAPA INTERNA ANTI-INCRUSTACIONES ANTI-FOULING INTERNAL LAYER
CAPA EXTERNA DE PROTECCIÓN UVUV PROTECTION EXTERNAL LAYER
ECOLÓGICO Y RECICLABLEECOLOGICAL AND RECYCLABLE
HOTELSHOTELS
HOSPITALESHOSPITALS
CENTROS COMERCIALES
SHOPPING CENTRES
GARAJESGARAGES
EDIFICIOS INSTITUCIONALES
INSTITUTIONAL BUILDINGS
EDIFICIOS DE OFICINAS
OFFICE BUILDINGS
AEROPUERTOSAIRPORTS
EDIFICIOS RESIDENCIALES
RESIDENTIAL BUILDINGS
INSTALACIONES DEPORTIVAS
SPORTS FACILITIES
CENTROS DOCENTESTEACHING CENTERS
MUSEOSMUSEUMS
EDIFICIOS INDUSTRIALES
INDUSTRIAL BUILDINGS
CINES Y TEATROSCINEMAS AND
THEATRES
EDIFICIOSPENITENCIARIOS
PENITENTIARY CENTRES
Ficha técnica ABN//INSTAL CT FASER RD | 01/2021Technical data sheet ABN//INSTAL CT FASER RD V2
Tipo de unión | Joining techniques
CÓDIGO
Code
DOCTF32020000
DOCTF32025000
DOCTF32032000
DOCTF50040000
DOCTF50050000
DOCTF50063000
DOCTF50075000
DOCTF50090000
DOCTF50110000
DOCTF50125000
DOCTF50160000
(mm)
20
25
32
40
50
63
75
90
110
125
160
(mm)
2.8
3.5
4.4
3.7
4.6
5.8
6.8
8.2
10.0
11.4
14.6
GAMA DE PRODUCTO / PRODUCT RANGE
Serie/
SDR
3,2/7.4
3.2/7.4
3.2/7.4
5/11
5/11
5/11
5/11
5/11
5/11
5/11
5/11
(m)
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
5,8
5,8
*Longitudes de tubo bajo demanda: barras hasta 13 m*On request 42,65 ft lengths.
DIÁMETRODiameter
ESPESORthickness
(in)
0.11
0.14
0.17
0.15
0.18
0.23
0.27
0.32
0.39
0.45
0.57
LONGITUDlength
(ft)
13.12
13.12
13.12
13.12
13.12
13.12
13.12
13.12
13.12
19.00
19.00
(kg/m)
0.150
0.233
0.374
0.445
0.682
1.025
1.435
2.077
3.101
4.008
6.558
PESOweight
(lb/ft)
1.08
1.68
2.70
3.22
4.93
7.41
10.39
15.02
22.43
28.99
47.43
(in)
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
2 1/2"
3"
4"
5"
6"
•Soldadura a socket (para diámetros de 20 a 160 mm) Socket welding (for diameters from ½" to 6" )
•Soldadura a tope (para diámetros de 90 a 160 mm) Butt welding (for diameters from 3" to 6" )
•Soldadura por electrofusión (para diámetros de 20 a 160 mm) Electrofusion welding (for diameters from 1/2" to 6")
Co2
(kg)
0.56
0.86
1.39
1.65
2.53
3.80
5.32
7.71
11.50
14.87
24.33
Agua
Water
(litros)
4.96
7.71
12.38
14.73
22.57
33.92
47.48
68.73
102.61
132.62
217.00
Impacto ambiental Environmental impact
CO2RoHS
Energía
Energy
(MJ)
7.16
11.12
17.85
21.24
32.55
48.91
68.48
99.11
147.98
191.26
312.95
Compr.con RoHS
RoHScommitm.
Uso alimet.
Food use
Fin de vida útilEnd of firts life
¨Reutilizar/
Re-use
Reciclar/Recycle
¨Ciclo de
degradación/Downcycle
¨Combustión/ Combustion
¨Vertedero/
Landfill
¢
Tuberías | Pipelines
Los sistemas ABN//INSTAL CT FASER RD se unen mediante soldadura de termofusión. A continuación se indican los distintos tipos, y el rango de diámetros para cada uno de ellos:
ABN // INSTAL CT FASER RD systems are joined by thermofusion. Different techniques and the range of diameters for each of them are described below:
Termofusión | Thermofusion
Ficha técnica ABN//INSTAL CT FASER RD | 01/2021Technical data sheet ABN//INSTAL CT FASER RD V2
Accesorios | Fittings
Material | Material Color | ColourPP RCT RP Verde | Green
GAMA ACCESORIOS SOLDAR A SOCKET /
Dispone de una amplia gama de accesorios de diámetros comprendidos entre 20 a 160 mmWide range of fittings from 1/2" to 6" mm
SOCKET WELDING FITTINGS
GAMA ACCESORIOS SOLDAR A TOPE BUTT WELDING FITTINGS
La gama comprende accesorios manipulados de diámetro 90 a 160 mmThe range includes manipulated fittings of diameters 3 "to 6"
GAMA ACCESORIOS SOLDAR POR ELECTROFUSIÓNELECTROFUSION WELDING FITTINGS
Los accesorios por electrofusión disponen de una gama de 20 a 160 mmElectrofusion fittings range from ½ "to 6"
HF
UV
LIBRE DE HALÓGENOSHALOGEN FREE
RESISTENCIA A LOS PROCESOS DE DESINFECCIÓNRESISTANCE TO DISINFECTION PROCESSES
PROTECCIÓN ANTIMICROBIANAANTIMICROBIAL PROTECTION
CAPA EXTERNA DE PROTECCIÓN UV UV PROTECTION EXTERNAL LAYER
ECOLÓGICO Y RECICLABLEECOLOGICAL AND RECYCLABLE
COLECTORES Y PIEZAS ESPECIALES MANIFOLDS AND SPECIAL PARTS
CARACTERÍSTICAS DIFERENCIADORAS l DIFFERENTIATING FEATURES
3.000
250 500 500 500 500 500 250
150
250
350
250
Ø110 Ø125 Ø110 Ø110
Ø160 Ø50- 1 ½” M750750
Ø63- 2" M
1.250
ABN//INSTAL CT FASER RD FIRE Ø160 serie 5- SDR 11
Ø90
Ficha técnica ABN//INSTAL CT FASER RD | 01/2021Technical data sheet ABN//INSTAL CT FASER RD V2
Material / Material PPR CT RP + FV
Densidad / Density 905 kg/m3 según ISO 1183
Índice de fluidez en masa / Melt mass flow rate 0,30 g/10 min según ISO 1133
Coeficiente de dilatación térmica lineal / Lineal expansion coefficient 0,035 mm/m ºC
Módulo de elasticidad / Elastic modulus 900 Mpa según ISO 527
Coeficiente de conductividad térmica/ Thermal expansion coefficient 0.24 w/mk según DIN 52612
Fabricación / Production EN ISO 15874/DIN 8077/DIN 8078
Presiones con 50 años de funcionamiento según DIN 8077 (SF: 1,25)Working pressures for 50 years according to DIN 8077 (SF: 1.25)
Serie
3.2
5
*Para esta temperatura son 25 años /25 years for this temperature
bar
31.7
20.3
psi
459.8
294.4
20ºC/68ºF
bar
17.7
11.3
psi
256.7
163.9
60ºC/140ºF
bar
14.9
9.5
psi
216.1
137.8
70ºC/158ºF
bar
12.7
8.1
psi
184.2
117.5
80ºC/176ºF*
La gama ABN//INSTAL CT FASER RD (tubería + accesorios) están libres de halógenos.
The ABN // INSTAL CT FASER RD range (pipe + fittings) are halogen-free.
Valores técnicos | Technical values
Ficha técnica ABN//INSTAL CT FASER RD | 01/2021Technical data sheet ABN//INSTAL CT FASER RD V2
Etapa del productoProduct
stage
Mat
eria
prim
aR
aw m
ater
ials
Tran
spor
teTr
ansp
ort
Fabr
icac
ión
Man
ufac
turin
g
Tran
spor
teTr
ansp
ort
Inst
alac
ión
en o
bra
Cons
tuct
ion
inst
alla
tion
Uso
Use
Man
teni
mie
nto
Mai
nten
ance
Rep
arac
ión
Rep
air
Rem
plaz
oR
epla
cam
ent
Rem
odel
ació
nR
efur
bish
men
t
Uso
ope
raci
onal
de
ener
gía
Ope
ratio
nal e
nerg
y us
e
Uso
ope
raci
onal
de
agua
Ope
ratio
nal w
ater
use
De c
onst
rucc
ión
- dem
olic
ión
De-c
onst
ruct
ion
- dem
oliti
on
Proc
esam
ient
o de
resi
duos
W
aste
pro
cess
ing
Tran
spor
teTr
ansp
ort
Elim
inac
ión
Disp
osal
Pote
ncia
l de
reut
iliza
ción
- re
cupe
raci
ón -
reci
claj
eR
euse
- R
ecov
ery
- R
ecyc
ling
- pot
entia
l
Transporte e instalaciónConst. process
stage
Final del ciclo de vidaEnd of life stage
Etapa de recuperación de recursos
Resource recovery stage
A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 B6 B7 C1 C2 C3 C4 D
Etapa de usoUse stage
MND ( módulo no declarado | module non declared)
Valores ambientales | Environmental values
SYSTEM BOUNDARIES
Boundary for the LCA has been set in a cradle-to-gate approach, thus therefore only Modules A1-A3 (mandatory) has been addressed.
The objective of this EPD is address the environmental footprint of manufacturing both ABN//INSTAL CT FASER RD family pipes. These pipes are intended for a wide number o applications, leading to a great variability of cases for both Construction and end of life stages, which are outside the outreach of ABN Pipes.
Our piping system do not require any maintenance or replacement during its service life (over 50 years).
Due to this, all stages downstream the manufacturing process has been excluded from the lifecycle, and thus, according to the PCR instructions, only A1-A3 modules have been addressed.
According to PCR and General Programme Instructions, recycling of non-compliant products have been omitted, as this material is grinded and re-used in the same process.
LÍMITES DEL SISTEMA
La frontera para el ACV se ha establecido en un enfoque desde la cuna hasta la puerta, por lo tanto, solo se han abordado los módulos A1-A3 (obligatorio).
El objetivo de esta EPD es abordar la huella ambiental de la fabricación de tuberías de la familia ABN// INSTAL CT FASER RD. Estos tubos están diseñados para un gran número de aplicaciones, lo que conduce a una gran variabilidad de casos tanto para la construcción como para el final de la vida útil, que están fuera del alcance de ABN Pipe.
Nuestro sistema de tuberías no requiere ningún mantenimiento o reemplazo durante su vida útil (más de 50 años).
Debido a esto, todas las etapas posteriores al proceso de fabricación se han excluido del ciclo de vida y, por lo tanto, de acuerdo con las instrucciones de PCR, solo se han abordado los módulos A1-A3.
Según el PCR (Product Construction Rules) y las instrucciones generales del programa, se ha omitido el reciclaje de productos no conformes, ya que este material se tritura y se reutiliza en el mismo proceso.
Ficha técnica ABN//INSTAL CT FASER RD | 01/2021Technical data sheet ABN//INSTAL CT FASER RD V2
Las siguientes tablas muestran el impacto ambiental del sistema de tuberías FASER, desglosado en los tres módulos (materias primas, transporte y producción). Para todas las categorías analizadas, los resultados muestran que la producción de materia prima es el principal contribuyente al impacto ambiental del sistema de tuberías FASER, seguido de la producción y el transporte de las tuberías.
PARÁMETRO/ PARAMETER
Potencial de calentamiento global (GWP)Global warming potential (GWP)
Potencial de agotamiento la capa de ozono estratosferíco (ODP) Depletion potential of the stratospheric ozone layer (ODP)Potencial de acidificación (AP)Acidification potential (AP)
Potencial de eutrofización (EP)Eutrophication potential (EP)
Potencial de formación del ozono troposférico (POCP)Potencial formation of troposferic ozone (POCP)
Potencial de agotamiento abiótico - ElementosAbiotic Potential Depletion- Elements
Potencial de agotamiento abiótico - Recursos fósilesAbiotic Potential Depletion- Fossil resources
Potencial de escasez de aguaWater scarcity potential
UNIDAD/ UNIT
kg CO eq.2
kg CFC 11 eq.
kg S0 eq.2
3kg PO eq4
kg C H eq2 4
kg Sb eq.
MJ, net calorific value
3m eq.
A1
2.22
3.14E-08
2.58E-02
6.84E-03
1.28E-03
2.70E-04
66.15
0.72
A2
0.38
6.92E-08
9.44E-04
1.18E-04
5.94E-05
1.14E-06
6.00
0.04
A3
0.31
2.79E-08
1.59E-03
2.55E-04
2.07E-04
1.07E-06
6.10
0.16
TOTAL
2.91
1.29E-07
2.83E-02
7.21E-03
1.54E-03
2.73E-04
78.25
0.91
UNIDAD DECLARADA PARA TODOS LOS DATOS MOSTRADOS: 1 kg de sistemas de tuberías
DECLARED UNIT FOR ALL DATA SHOWN:1 kg of piping systems
The next tables show the environmental impact of the ENERGY piping system, broken down in three modules (raw materials, transport and production). For all categories analysed, results show that raw material production is the main contributor to the environmental impact of FASER piping system, followed by pipe production and transportation.
Valores ambientales | Environmental performance
Ficha técnica ABN//INSTAL CT FASER RD | 01/2021Technical data sheet ABN//INSTAL CT FASER RD V2
Con respecto al consumo de energía, la producción de materia prima es la etapa más intensiva en energía primaria no renovable, mientras que la producción de tuberías es el principal consumidor de energía primaria de fuentes renovables.
Recursos de energía primaria RenovablesPrimary energy resources. Renewable
Recursos de energía primaria no renovablesPrimary energy resources. Non-renewable
Use como transporte de energíaUse as energy carrierUso como materia primaUse as raw materialsTOTAL
Use como transporte de energíaUse as energy carrierUso como materia primaUse as raw materialsTOTAL
Mj, valor calorífico netoMj, net calorific value
Mj, valor calorífico netoMj, net calorific value
kg
Mj, valor calorífico netoMj, net calorific value
3m
1.46
0
1.46
70.49
0
70.49
0
0
0
2.08E-02
0.07
0
0.07
6.10
0
6.10
0
0
0
1.16E-03
8.10
0
8.10
6.71
0
6.71
0
0
0
4.43E-03
9.63
0.02
9.63
83.30
0
83.30
0
0
0
2.64E-02
Material secundarioSecondary material
Combustibles secundarios renovablesRenewable secondary fuels
Combustibles secundarios no renovablesNon-renewable secondary fuels
Uso neto de agua dulceNet use of fresh water
PARÁMETRO/ PARAMETER UNIDAD/ UNIT A1 A2 A3 TOTAL
Regarding energy consumption, the production of raw materials is the most intensive stage in non-renewable primary energy, while the production of pipes is the main consumer of primary energy.
Valores ambientales | Environmental performance
Con respecto a la producción de residuos en el proceso, la mayoría de los residuos generados durante el proceso están catalogados como residuos no peligrosos.
Residuos peligrosos (kg)Hazardous waste (kg)
Residuos no peligrosos (kg)Non-hazardous waste (kg)
Residuos radioactivos (kg)Radioactive waste (kg)
PARÁMETRO/ PARAMETER A1 A2 A3 TOTALRegarding the production of waste in the process, most of the waste produced during the process is classified as non-hazardous waste.
En el cuadro adjunto se detallan los valores obtenidos en las distintas categorías y la certificación general.
Certificación ambiental Cradle to Cradle
The attached table details the values obtained in the different categories and the general certification.
Cradle to Cradle environmental certificate
8.23E-05
1.35E-01
1.68E-05
3.44E-06
2.73E-01
3.93E-05
8.99E-05
6.43E-02
1.56E-05
9.48E-05
4.73E-01
7.17E-05
Ficha técnica ABN//INSTAL CT FASER RD | 01/2021Technical data sheet ABN//INSTAL CT FASER RD V2
Normas | Standards
–UNE EN ISO 15874. Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013).
–RP 01.78 - AENOR Particular Regulation of the Certificate of AENOR Compliance for Systems Random Polypropylene pipeline with modified crystal structure (PP-RCT) and fiberglass (FV) for hot and cold water installations in the interior of the building structure.
•DIN 8077. RCT. Dimensions.
•DIN 8078. Polypropylene (PP) pipes - PP-H, PP-B, PP-R, PP-RCT. General quality requirements and testing.
–Royal Decree 140/2003, of 7 February, which establishes sanitary criteria for the quality of water for human consumption.
•UNE 100030. Guidelines for prevention and control of proliferation and spread of Legionella in facilities.
•UNE EN 15804 + A1. Sustainability of construction works - Environmental product declarations. Core rules for the product category of construction products.
•UNE EN ISO 14040. Environmental management - Life cycle assessment - Principles and framework.
•UNE EN ISO 14044. Environmental management - Life cycle assessment - Requirements and guidelines
•UNE EN ISO 14025. Environmental labels and declarations - Type III environmental declarations - Principles and procedures.
Polypropylene (PP) pipes –PP-H, PP-B, PP-R, PP-
El sistema ABN//INSTAL CT FASER RD está diseñado, producido, ensayado y certificado según las siguientes normas:The ABN // INSTAL CT FASER RD system is designed, manufactured, tested and certified according to the following standards:
–UNE EN ISO 15874. Sistemas de canalización en materiales plásticos para instalaciones de agua caliente y fría. Polipropileno (PP). Parte 1: Generalidades. (ISO 15874-1:2013).
•RP 01.78. Reglamento Particular del Certificado de Conformidad AENOR para Sistemas de canalización en Polipropileno Random con estructura cristalina modificada (PP-RCT) y fibra de vidrio (FV) para instalaciones de agua caliente y fría en el interior de la estructura de los edificios.
•DIN 8077. Tubos de polipropileno (PP) –PP-H, PP-B, PP-R, PP-RCT. Dimensiones.
•DIN 8078. Tubos de polipropileno (PP) - PP-H, PP-B, PP-R, PP-RCT. Requisitos y pruebas generales de calidad.
–RD 140/2003. Real Decreto 140/2003, de 7 de febrero, por el que se establecen los criterios sanitarios de la calidad del agua de consumo humano.
•UNE 100030. Prevención y control de la proliferación y diseminación de Legionella en instalaciones.
•UNE EN 15804 +A1. Sostenibilidad en la construcción. Declaraciones ambientales de producto. Reglas de categoría de producto básicas para productos de construcción.
•UNE EN ISO 14040. Gestión ambiental. Análisis del ciclo de vida. Principios y marco de referencia.
•UNE EN ISO 14044. Gestión ambiental. Análisis del ciclo de vida. Requisitos y directrices.
•UNE EN ISO 14025. Etiquetas y declaraciones ambientales. Declaraciones ambientales tipo III. Principios y procedimientos.
Ficha técnica ABN//INSTAL CT FASER RD | 01/2021Technical data sheet ABN//INSTAL CT FASER RD V2
Certificados | Approvals
Certificado de Conformidad AENOR : ESPECIFICACIÓN TÉCNICA 001.78
Certificate of conformity AENOR: TECHNICAL SPECIFICATION TO RP
Certificado de Conformidad AENOR : ESPECIFICACIÓN TÉCNICA 001.78
Certificate of conformity AENOR: TECHNICAL SPECIFICATION TO RP
001.78
Certificado AENOR – UNE EN ISO 15874
AENOR Product Certificate-UNE EN 15874
RD 140/2003 - Real Decreto 140/2003.
Royal Decree 140/2003
Declaración ambiental de producto EPD Environmental Product Declaration EPD
Certificado Cradle to Cradle
Cradle to Cradle Certificate
Ficha técnica ABN//INSTAL CT FASER RD | 01/2021Technical data sheet ABN//INSTAL CT FASER RD V2
Sección HS4 - SUMINSTRO DE AGUA
Cumplimiento del Real Decreto 140/2003
Resistentes a la corrosión interior
No deben de presentar incompatibilidad electroquímica entre si
La instalación de suministro de agua debe de tener características adecuadas para evitar el desarrollo de gérmenes patógenos y no favorecer el desarrollo de la biocapa
La temperatura de ACS en los puntos de consumo debe estar comprendida entre 50 ºC y 65 ºC
ABN//INSTAL CT FASER RD
Dispone del ensayo Real Decreto 140/2003
Es resistentes a la corrosión interior
No presenta incompatibilidad electroquímica
Dispone de un tratamiento antimicrobiano que reduce la formación de biofilm e impide el desarrollo de gérmenes patógenos.
Soportan temperaturas superiores a las exigidas (95ºC)
EXIGENCIAS DEL CTE - Documento Básico Salubridad
Aplicación de la normativa | Application of standards
Real Decreto 865/2003, Criterios higiénico-sanitarios para la prevención y control de la legionelosis.
Artículo 1. Objeto
Este real decreto tiene como objeto la prevención y control de la legionelosis mediante la adopción de medidas higiénico-sanitarias en aquellas instalaciones en las que la Legionella es capaz de proliferar y diseminarse.
Los sistemas de tuberías ABN//INSTAL CT FASER RD tienen incorporado un tratamiento antimicrobiano que ayuda a reducir las bacterias coliformes y la legionella.
ABN//INSTAL CT FASER RD es apto para soportar los tratamientos tanto térmicos como químicos indicados en dicho regalmento
A continuación se realiza una pequeña síntesis de las exigencias normativas para las instalaciones y cómo contribuye ABN//INSTAL CT FASER RD a su cumplimiento.Below you can find a brief summary of the regulatory requirements for the facilities and how ABN // INSTAL CT FASER RD contributes to their compliance.
Ficha técnica ABN//INSTAL CT FASER RD | 01/2021Technical data sheet ABN//INSTAL CT FASER RD V2
Válido hasta el 31 de diciembre de 2018
Manufacturedin
Spain
PIPE SYSTEMS
CENTRAL
CTRA. BAÑOS DE ARTEIXO, 28PARQUE EMPRESARIAL AGRELA15008 A CORUÑA (ESPAÑA)
T. +34 902 202 532F. +34 902 253 240
PLANTA DE PRODUCCIÓN (con certificación)
PARQUE EMPRESARIAL MEDINA ONAUTOVÍA A-6, KM 15247400 MEDINA DEL CAMPO(VALLADOLID)
Distribuidor/ Distributor
TUBGrupo Sectorial Tuberías Plásticas de
Miembro de:
Página 1Página 2Página 3Página 4Página 5Página 6Página 7Página 8Página 9Página 10Página 11Página 12Página 13Página 14Página 15Página 16