Main Page IP: 192.168.254.254. User: admin Pass: admin If this is a new install DHCP will be working so you can just connect to it. If you need to modify one installed already DHCP will be turned off so you will need to assign your computer a static IP in the range to log into it. The screen shot below is after it's already in bridge mode. Frontier - DSL Settings FRONTIER - DSL SETTINGS 1
11
Embed
Frontier - DSL Settings - alj.usalj.us/blog/wp-content/uploads/2016/10/Frontier-DSL-Settings-Spice... · Broadband Connection --> Edit Click on Edit. You see the "Protocol" is set
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Main PageIP: 192.168.254.254. User: admin Pass: admin
If this is a new install DHCP will be working so you can just connect to it. If you need tomodify one installed already DHCP will be turned off so you will need to assign yourcomputer a static IP in the range to log into it. The screen shot below is after it'salready in bridge mode.
Frontier - DSL Settings
FRONTIER - DSL SETTINGS 1
Frontier - DSL Settings
FRONTIER - DSL SETTINGS 2
My Connected Home --> Network ConnectionsClick the Action icon.
Frontier - DSL Settings
FRONTIER - DSL SETTINGS 3
Broadband Connection --> EditClick on Edit. You see the "Protocol" is set for bridge mode. This screen shot is after Ichanged it to bridge mode.
Frontier - DSL Settings
FRONTIER - DSL SETTINGS 4
VC 1 ConfigurationProtocol: Bridge and Bridge Mode: Bridge The screen shot below is after making thechanges.