FROM SINGLE COMPONENT O COMPLETE … Steel.pdf · Stainless Steel 304L Fitting ASTM A403, WP304L Pipe ASTM A312, A358 TP304L Plate ASTM A240 TP304L Forged ASTM A182 F304L …

www.canadoilgroup.comWorld Class Provider of Piping Solutions

TM

O I L & G A S P O W E R G E N E R AT I O N R E F I N I N G P E T R O C H E M I C A L C H E M I C A L P R O C E S S W AT E R T R E AT M E N T

304L/316L/317L/321/347Stainless Steel

Canadoil Group manufactures Stainless steel 304L/316L/ 317L/321/347 welded pipe, fitting, piping systems and pressure vessels. These products provide excellent corrosion and mechanical properties for use in extreme service conditions and environments.

PIPING SOLUTIONS

FROM SINGLECOMPONENT

TO COMPLETEENGINEERED PIPING

SYSTEMSCANADOIL GROUP

IS THE ONE-STOP-SHOP

Please visit our website for your regional sale offices

Canadoil GroupE-mail: [email protected]

Stainless Steel 304L

Fitting ASTM A403, WP304LPipe ASTM A312, A358 TP304LPlate ASTM A240 TP304LForged ASTM A182 F304LUNS. No S30403

INDUSTRIES SERVED

STANDARDProduct Type

Stainless Steel 304L/316L/317L/321/347

PRODUCT CHARACTERISTICSStainless Steel 304L

Non-hardenable except by cold workingSusceptible to chloride stress corrosion crackingGood corrosion resistanceResistance to oxidation High strength with low weight Stainless Steel 321

Stabilized to permit use in 800-1500°F (426-815°C) range without harmful carbide precipitationTitanium stabilized 18-8 stainless steelImproved intergranular corrosion resistanceExcellent for high temperature service in carbide precipitation rangeSusceptible to chloride stress corrosion cracking

Oil & Gas, Power generation, Refining, Petrochemical, Chemical process, and Water treatment

Canadoil Group has developed its manufacturing capabilities to provide ultimate piping solutions using superior materials to serve the growing industry needs.

Stainless Steel 316LExtra low carbon version of type 316 eliminate harmful carbide precipitation due to weldingAn austenitic chromium-nickel stainless steel with improved corrosion/heat resistance, adaptable for welding, brazing and where other short-time, high temperature conditions are encounteredSusceptible to chloride stress corrosion crackingNon-hardenable, non-magnetic in the annealed condition and slightly magnetic when cold workedImproved corrosion resistance to chloridesCorrosion/heat resistance

Stainless Steel 317LExtra low carbon variation of T- 317 for weldedAn austenitic chromium-nickel molybdenum steel with improved chloride pitting resistance over Type 316Susceptible to chloride stress corrosion cracking

Stainless Steel 347

Characteristics similar to type 321. Stabilized by Cb and TaHigh creep and rupture properties

Stainless Steel 316L

Fitting ASTM A403, WP316LPipe ASTM A312, A358 TP316LPlate ASTM A240 TP316LForged ASTM A182 F316LUNS. No S31603

Stainless Steel 317L

Fitting ASTM A403, WP317LPipe ASTM A312, A358 TP317LPlate ASTM A240 TP317LForged ASTM A182 F317LUNS. No S31703

Stainless Steel 321

Fitting ASTM A403, WP321Pipe ASTM A312, A358 TP321Plate ASTM A240 TP321Forged ASTM A182 F321UNS. No S32100

Stainless Steel 347

Fitting ASTM A403, WP347Pipe ASTM A312, A358 TP347Plate ASTM A240 TP347Forged ASTM A182 F347UNS. No S34700

The data contained in this publication is for informational purposes only and may be revised at any time without prior notice. The data is believed to be accurate and reliable, but Canadoil makes no representation or warranty of any kind (express or implied) and assumes no liability with respect to the accuracy or completeness of the information contained herein. Although the data is believed to be representative of the product, the actual characteristics or performance of the product may vary from what is shown in this publication. Nothing contained in this publication should be construed as guaranteeing the product for a particular use or application.

CANADOIL PRODUCTS

Diameter 250 mm (10”) - 3048 mm (120”)Thickness 6.35mm (1/4”) - 100 mm (4”)Length 3 meters (72” - 120”), 12 meters (10” - 72”), 15 meters (16” - 72”)

ELBOW

Diameter 406.4mm (16”) - 2600mm (102”)Thickness 6mm (1/4”) - 150mm (6”)

Diameter 406.4mm (16”) - 2600mm (102”)Thickness 6mm (1/4”) - 150mm (6”)

TEE REDUCER

CAP

Diameter 406.4mm (16”) - 2600mm (102”)Thickness 6mm (1/4”) - 150mm (6”)

PIPE

Diameter 406.4mm (16”) - 2600mm (102”)Thickness 6mm (1/4”) - 150mm (6”)

PRESSURE VESSEL

Diameter 406.4mm (16”) - 8000mm (320”)Thickness 6mm (1/4”) - 150mm (6”)

Used for exhaust manifolds, expansion joints, high temperature chemical process heat exchanger tubes, and recuperator tubesGood strength and toughness at cryogenic temperatures

APPLICATIONS FOR STAINLESS STEELHeat exchangers, feedwater heaters, condensers, and evaporators Corrosion resistance to sour crudes