FRESH AND HARDENED CONCRETE TESTING AND HARDE… · ⎘standards: en 12390–2, astm c31, c192 ♦ product code: lt- b0016 & lt- b0017 ⎘ standards: en 12350-6, astm c29, c138 ♦

⎘ STANDARDS: EN 12390-1, ASTM C39, C192

♦ PRODUCT CODE: LT- B0001 & LT- B0004





Hard plastic or steel cube moulds are manufactured in accordance to dimensions and tolerances stated in the related standards.

Steel beam moulds are manufactured in accordance to dimensions and tolerances stated in the related standards.

Two part and clamp attached base plate steel moulds are designed to be durable, resistant and easy to clean.

Hard plastic or steel cylinder moulds are manufactured in accordance to dimensions and tolerances stated in the related standards. Two part and clamp attached base plate plastic and steel moulds are designed to be durable, resistant and easy to clean.

⎘ STANDARDS: EN 12390-2


∴ Power Supply : 220V, 50–60 Hz, 1 ph


♦ PRODUCT CODE: LT- B0015

∴ Weight: 2 kg

The LİYA fixed amplitude vibrating table is a compact unit providing controlled vibro-compaction in the laboratory using cube or cylinder moulding equipment.

Vibrating tables consists of vibrating motor, control unit and clamping assembly. The table is available in two alternative sizes, 610 x 380 mm and 1260 x 620 mm. Small table accepts 4, large table accepts 8 cube, cylinder moulds or beam moulds by using clamping assembly.

The apparatus is used for determination of setting time of the mortar fraction of fresh concrete.

The apparatus consists of a spring loading device which is graduated from 2 to 150 lbs, supplied complete with a set of needle points of 650, 325, 160, 65, 32, and 16 mm2 area.

1

FRESH AND HARDENED CONCRETE TESTING

1

⇲ ⇲ CONCRETE CUBE MOULDS

⇲ ⇲ CONCRETE BEAM MOULDS

LT - B0001

LT - B0002

LT-B0009 & LT-B0010 & LT-B0011

⇲ ⇲ CONCRETE CYLINDER MOULDS

LT - B0005

LT - B0008 ⇲ ⇲ VIBRATING TABLE

LT -B0014

⇲ CONCRETE PROCTOR PENETROMETER

LT - B0015

Product Code Material Dimension

(mm) Weight

(kg)

LT -B0001 Plastic 150x150x150 2,2 LT -B0002 Steel 150x150x150 16,2 LT -B0003 Steel 100x100x100 7 LT -B0004 Steel 200x200x200 20,2

Product Code Dimension (cm)

Weight (kg)

Mould Capacity

LT -B0013 61X38X78 60 4 LT -B0014 62X126X106 155 8

Accessories and Spare Parts

LT -B0015/1 Penetrometer Needles

LİYA LABORATORY TEST EQUIPMENT

Product Code Material Dimension (mm)

Weight (kg)

LT -B0009 Steel 100x100x400 20,3 LT -B0010 100x100x500 18,5 LT -B0011 150x150x600 38,4 LT -B0012 150x150x700 40 Steel

SteelSteel

Product Code Material Dimension (mm)

Weight (kg)

LT -B0005 Steel 150x300 7,5 LT -B0006

Plastic

150x300

1,6

LT -B0007

100x200

5,2

LT -B0008

100x200

1

SteelPlastic

⎘ STANDARDS: EN 12390–2, ASTM C31, C192




⎘ STANDARDS: ASTM C403, AASHTO T197, UNI 7123


∴ Weight: 400 g

Poker Vibrator is ideal for the internal compaction of concrete specimens and a good alternative to traditional tamping bar especially when there are large numbers of specimens to be compacted. Flexible shaft length and tip diameter can be selected upon user's request.

∴ Power Supply: 220-240 V 50Hz 1ph.

Bulk Density Measures are used to determine the weight per cubic meter of freshly mixed and compacted concrete.

Bulk Density Measures manufactured from heavy gauge steel complying with the related standard. Coated against corrosion.

The apparatus is designed for determination of setting time of fresh concrete for field andlaboratory use. Stainless steel plunger 32.3 mm² (1/20 inch²) area; plunger graduated 0-5 MPa.

⎘ STANDARDS: EN 12350-5, BS 1881-105


⎘ STANDARDS: EN 12350–2, BS 1881: 102, ASTM C143


The test set is used for concrete mixes of high workability. The test determines flow index as an arithmetic mean of the diameter of the specimen after working on a flow table.

The apparatus consists of a double steel table, the upper table measuring 700x700 mm and hinged at one side to the lower table. The top table is inscribed and all parts are protected against corrosion. The stainless steel cone has a top 130 mm dia., base 200 mm dia., and is 200 mm high. Supplied complete with wooden tamping rod.

The Slump test method is used for the determination of the consistency, the medium and high workability of fresh concrete.

The set consists of slump cone, slump cone funnel, 600 mm long x 16 mm diameter tamping rod which is hemispherical at both ends, base plate, rubber mallet and steel rule. Supplied either galvanized or paint coated to prevent corrosion.

⇲

1

⇲

2

POKER VIBRATOR⇲ ⇲

LT - B0016

BULK DENSITY MEASURE⇲ ⇲

LT - B0018 & LT-B0022

CONCRETE POCKET PENETROMETER⇲ ⇲

LT - B0032

FLOW TABLE⇲ ⇲

LT - B0023


Weight (kg)

LT -B0023 20x20x40 5

Product Code Capacity (Lt)

Weight (kg)

LT -B0018 3 4,5 LT -B0019 7 7,5 LT -B0020 10 8,8 LT -B0021 15 10,4 LT -B0022 30 18,9



Dimension

(mm) Weight

(kg)

LT -B0016 Ø38x400 18000 10 LT -B0017 Ø27x100 12000 5

Product Code Frequency

Product Code

LT -B0023 Flow Table Test Set LT -B0024 Flow Table LT -B0025 Flow Cone LT -B0026 Wooden Tamper

Product Name

⇲ ⇲ SLUMP TEST SET

Product Code

Product Name Dimension (mm)

Weight (kg)

LT -B0038 Slump Test Set 5 LT -B0039 Slump Cone Ø200XØ100X300 LT -B0040 Slump Cone Funnel LT -B0041 Slump Tray LT -B0042 Tamping Rod 16X600 LT -G0161 Rubber Mallet LT -G0175 Steel Ruler 300

LT - B0038

⎘ STANDARDS: EN 12350–7, ASTM C231


∴ Weight : 3,5 kg

The apparatus is used to determine air content of fresh concrete. It consists of a flanged 7 liter capacity cylindrical vessel and cover assembly incorporating a pressure gauge air pump and valves.

The meter measures up to 22% entrained air with an accuracy of ±0.25% at full scale. It is appropriate for aggregates size of maximum 50mm. The instrument can be calibrated and it is supplied complete with straight edge and tamping rod.

⎘ STANDARDS for Concrete Samples:

ASTM C31, C39, C192, C617, EN 12390-1, 12390-3

⎘ STANDARDS for Core Samples:

ASTM C42, C397, EN 12390-1, 12390-3, 12504-1

♦ PRODUCT CODE: LT-B0077

Automatic Grinding Machine is quickly becoming the chosen alternative to the traditional rubber or sulphur capping method used by Quality Construction Labs.

Can be used to grind concrete specimens, natural stones, tiles, block pavers, ceramic materials etc.

This machine is ideal for commercial testing labs and large producers who need to prepare a lot of cylinders for testing or wait times associated with capping compounds.

Not only is it a safer and healthier option, it also provides a better result in surface finish as well as flatness.

Cut Precision Plane and Parallel to within 0.05 mm.

Test period is 90-120 second adjustable.

Assemblies of the device in contact with water are made of stainless steel.

The device has locking wheels for easy transport.

Used a high-quality genuine diamond cutting wheel, which is supplied, to produce an accurate, smooth finish.

Adapters of cylinders, cubes and core samples can be easily mounted and removed.

Complete with clamping adapters for 150x300 mm cylinder, 150x150x150 mm cube and min. 35 mm dia, max. 150 mm dia core sample.

Large base table for grinding contemporaneously up to;

Ÿ 3 pieces 150x300 mm cylinder samples,Ÿ 3 pieces 100x200 mm cylinder samples,Ÿ 3 pieces 150x150x150 mm cube samples,Ÿ 3 pieces min. 35 mm dia, max. 150 mm dia core samples

or contemporaneously up to;

Ÿ 1 piece150x300 mm cylinder sample,Ÿ 1 piece100x200 mm cylinder sample,Ÿ 1 piece150x150x150 mm cylinder sample or Ÿ 1 piece min. 35 mm dia, max. 150 mm dia core sample.

Technical Specifications:

Power Supply : 380 V , 50–60 Hz

Power : 1850 W

Engine Speed : 3000 rpm

1

⇲

3

⇲ ⇲ AUTOMATIC GRINDING MACHINE

LT -B0077

⇲ ⇲ AIR ENTRAINMENT METER

LT -B0058 Product Code Dimension

(cm) Weight

(kg)

LT -B0077 80x140x140 250




∴ Power Supply: 380 V, 50–60 Hz, 1 ph, 1500 W

♦PRODUCT CODE: LT- B0061

The efficient mixing of concrete is essential if quality specimens are to be manufactured. Pan type mixers are suitable for the mixing in small quantities of concrete in the laboratory. The mixer is designed to give efficient mixing of both dry and wet materials.

The mixing pan is removable and tilts for easy access to the pan and emptying on completion of the mixing operation. The total volume of the pan is 100 liters but the effective capacity of the mixer is 56 liters.

The mixer head lifts clear to provide maximum access to the pan and holds the mixing blades at a constant depth during the mixing operation. The blades can be adjusted to suit the different types and volume of materials to be mixed.

The mixer is used for efficient mixing of concrete, plaster and mosaic.

Lightweight mixer is equipped with rubber wheels which provide high portability.

Product Code Capacity

Mixing Capacity

Ext. Dimension (cm)

Weight (kg)

LT -B0061 125 100 lt 67x102x115 39 LT -B0061/1 490 350 lt 23x13x15 550 LT -B0061/3 370 250 lt 21x12x14 400

Product Code Specifications

LT -B0061 Wheeled, Electrical LT -B0061/1 Wheeled, Diesel LT -B0061/3 Wheeled, Diesel

⎘ STANDARDS: EN 12390–2, ASTM C31, C192, C511


∴ Power Supply: 220 V, 50–60 Hz, 1 ph



∴ Power Supply: 220 V, 50–60 Hz, 1 ph

The curing tank is designed for curing concrete cubes and cylinders.

The tank is made from polyethylene. Supplied c o m p l e t e w i t h thermostat controlled heater, base rack and circulator pump.

The method is a mechanised variation of the slump test and includes determination of workability of fresh concrete by performing vibration to concrete after removal of the slump cone.

The assembly is mounted upon a small vibrating table operating at a fixed amplitude and frequency. The time to complete the required vibration gives an indication of the concrete workability. The set consists of vibrating table, slump cone, graduated rod with transparent plate, filling cone and tamping rod.

LT -B0060

1

4

⇲ ⇲ CONCRETE MIXER (PAN TYPE) ⇲ ⇲ ⇲ ⇲ CURING TANK

LT -B0059

⇲ ⇲ VIBRO CONSISTOMETER (VEBE)

LT -B0062

⇲ ⇲ Product Code Product Name Dimension (cm)

Weight (kg)

LT -B0059 Curing Tank 100x200x80 75 LT -B0059/1

Thermostat Controlled Heater

Product Code Capacity Mixing Cap. Dimension Weight (Lt) (Lt) (cm) (kg)

LT -B0062 100 56 95x100x120 245



280x220x710

Product Code Dimension (mm)

Weight (kg)

LT -B0060 87

⇲ ⇲ CONCRETE MIXER (DRUM TYPE)

LT -B0061

Product Code Per hour capacity Power Supply Power

LT -B0061 1.0-2.0 m³ 220 V 0,6 k W LT -B0061/1 6-8 m³ LT -B0061/3 4-5 m³

⎘ STANDARDS: EN 12390-8, ISO 7031


8 .



Used for the determination of the depth of penetration of water to hardened concrete specimens under pressure.

3 and 6 specimen capacity models are available. The system can test 150x150x150 mm, 200x200x200 mm cube or 150x300mm cylinder specimens.

Pressure to the sample, up to 8 bar with 0,2 bar precision is generated by way of compressed air applied to the integral water tank and controlled by a pressure regulator; with a pressure gauge. The penetration of water is measured through the burettes supplied complete with the system. The system comprises impermeability gaskets for every cell.

The apparatus has to be fitted with the suitable air compressor with maximum working pressure of bar.

Used in conjunction with a suitable electronic balance for specific gravity determination of fresh and hardened concrete and aggregates. A purpose built robust frame designed to support the electronic balance. The lower part of the frame incorporates a moving platform, which carries the water tank allowing the test specimens to be weighed in both air and water. The balance is not included in the test set and must be ordered separately. Any type of electronic balance fitted with under-bench weighing facility can be used.

Lifting device, cradle and plastic water tank are supplied complete with frame.





⎘ STANDARDS: UNI 11044


The apparatus is used to evaluate the segregation resistance of freshly mixed self compacting concrete by the observation the flowing speed due to the difference of samples remaining period in the funnel.

The test set consists of a stainless steel funnel placed vertically on a supporting stand. The discharge orifice is equipped with a lid, which can be momentarily opened.

The L Shape Box is used for evaluation of self compactability (confined flowability) of freshly mixed self compacting concrete. The box gives the opportunity to evaluate different properties, such as filling ability, passing ability and resistance to segregation.

The U Shape Box is used to determine the confined flowability and the capacity of SCC concrete to flow within confined spaces. The box is made of galvanized steel frame consisting of four 10 mm diameter and three 13 mm diameter bars.

1

5

⇲ ⇲ ⇲ ⇲ V FUNNEL

⇲ ⇲

⇲ ⇲

LT -B0066

⇲ ⇲

⇲ ⇲ CONCRETE IMPERMEABILITY APPARATUS ⇲ ⇲ ⇲ ⇲

⇲ ⇲ ⇲ ⇲ L SHAPE BOX ⇲ ⇲ ⇲ ⇲

LT-B0057

LT-B0055

LT-B0056

LT -B0065

Product Code Dimension

(cm) Weight

(kg)

LT -B0064 / 3 sample cap. 50X50X180 97 LT -B0065 / 6 sample cap. 50X50X180 108


Weight (kg)

LT -B0055 57X92X30 6


Weight (kg)

LT -B0056 70X20X60 18


Weight (kg)

LT -B0057 28x20x68 25



⇲ ⇲ ⇲ ⇲ U SHAPE BOX ⇲ ⇲ ⇲ ⇲

LT -B0066 Specific Gravity Test Set

LT -B0066/1 Specific Gravity Frame

LT -B0067

LT -B0068

Product Code Product Name Dimension (cm)

Weight (kg)

40x50x97 25

Cradle

Water Tank

⇲ ⇲ SPECIFIC GRAVITY TEST SET

FRESH AND HARDENED CONCRETE TESTING AND HARDE… · ⎘standards: en 12390–2, astm c31, c192 ♦ product code: lt- b0016 & lt- b0017 ⎘ standards: en 12350-6, astm c29, c138 ♦

Documents