Top Banner
FREESTANDING COUNTERWEIGHT ANCHOR • Non-penetrating design does not attach to the working surface, reducing the possibility of damage • Built-in shock absorbing post provides added safety to user and structure • Fall arrest and restraint rated for one worker for jobsite versatility • For use in general concrete, steel or asphalt construction and rooftop maintenance • Approved for use on these roof types: concrete, single ply mem- brane, bitumen membrane, asphalt sanded and asphalt stone chippings • Ideal for use on flat surfaces up to a maximum of 5 degrees slope/ pitch • Counterweights are 20.3kg and come with a integral carrying handle for easy transport and set-up Freestanding Anchor Does Not Require Attachment to Working Surface and Provides a Safe and Versatile Fall Arrest Rated Tie-Off Point!
2

Freestanding Anchor Does Not Require Attachment to Working ...

Dec 01, 2021

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Freestanding Anchor Does Not Require Attachment to Working ...

F R E E S T A N D I N G C O U N T E R W E I G H T A N C H O R

• N o n - p e n e t r a t i n g d e s i g n d o e s n o t a t t a c h t o t h e w o r k i n g s u r f a c e ,

r e d u c i n g t h e p o s s i b i l i t y o f d a m a g e

• B u i l t - i n s h o c k a b s o r b i n g p o s t p r o v i d e s a d d e d s a f e t y t o u s e r a n d

s t r u c t u r e • F a l l a r r e s t a n d r e s t r a i n t r a t e d f o r

o n e w o r k e r f o r j o b s i t e v e r s a t i l i t y • F o r u s e i n g e n e r a l c o n c r e t e , s t e e l

o r a s p h a l t c o n s t r u c t i o n a n d r o o f t o p m a i n t e n a n c e

• A p p r o v e d f o r u s e o n t h e s e r o o f

t y p e s : c o n c r e t e , s i n g l e p l y m e m -b r a n e , b i t u m e n m e m b r a n e , a s p h a l t s a n d e d a n d a s p h a l t s t o n e c h i p p i n g s

• I d e a l f o r u s e o n f l a t s u r f a c e s u p t o a m a x i m u m o f 5 d e g r e e s s l o p e /p i t c h

• C o u n t e r w e i g h t s a r e 2 0 . 3 k g a n d c o m e w i t h a i n t e g r a l c a r r y i n g

h a n d l e f o r e a s y t r a n s p o r t a n d s e t - u p

Freestanding Anchor Does Not Require Attachment to Working Surface and Provides a Safe and Versatile Fall Arrest Rated Tie-Off Point!

Page 2: Freestanding Anchor Does Not Require Attachment to Working ...

©2007,

Cap

ital

Saf

ety

Counterweight Anchor Models:7255003:Freestanding Counterweight Anchor, includes

sixteen 20.3kg plates, roof post, base and D-ring7200439:Single Counterweight Only, 20.3kg

Safe and Secure Anchor The freestanding counter-weight anchor provides a tie-off point for personnel performing work on flat roofs or structures. The anchor is fall arrest rated and can be used as a single anchor point system. After set-up, simply attach your shock absorbing lanyard, self retracting lifeline or rope grab and lifeline and you are ready to go.

Non-Penetrating Design This anchor is a counter-weight type, simply placed on top of the working surface. Weighted bases are added to rubber trays that are connected to a shock absorbing tie-off post. The anchor’s freestanding design installs without penetrating the roof sheathing or surface, saving valuable time and money. In addition, the design reduces the possibility of surface damage, roof leaks and voided roof warranties.

Specialised Load Distributing Design This anchor incorporates a revolutionary shock absorbing system called LEAP™. The LEAP™ post (with tie-off point) has an integral energy absorber that deploys in a controlled manner to absorb the forces generated during a fall. This specialized design provides added safety to the at-tached worker and better distributes the forces to the anchor and structure. By limiting the forces this way, the integrity of the roof is also preserved.

Easy Installation Installation of the anchor system is simple, fast and efficient. Due to its modular design, the installer will never have to lift more than 20.3kg. In some applications, the entire system can be lifted (by forklift or crane) into place for instant set-up and use. Refer to instruction manual for complete details.

Specifications:Counterweight Plates: Cast iron, galvanized Rubber Trays: Carbon steel, PVC coating “L” Bolts: Carbon steel, galvanized Roof Post and Base: Post is painted stainless steel, the base is painted carbon steel D-ring: Forged steel, zinc plated Standards: Meets EN 795, Class E requirements.

Capital SafetyUSA: 800.328.6146 • Canada: 800.387.7484 • Asia: +65 6558 7758 • Australia: 1800 245 002 • New Zealand: 0800 212 505Europe, Middle East, Africa: +33 (0)4 97 10 00 10 • Northern Europe: +44 (0) 1928 571324www.capitalsafety.com • [email protected] Ref: A01COUNTERWTDEN Ind.0

Align rubber trays into square pattern

using notches

Step 1 Step 2 Step 3 Step 4 Step 5

Install the “L” bolts into the slots on the

rubber trays

Stack plates (weights) over bolts and onto

rubber trays

Set post and base onto the “L” bolts

and plates

Install the remain-ing four plates and tighten bolts/nuts

F R E E S T A N D I N G C O U N T E R W E I G H T A N C H O R