8/16/2019 Freelander 3.2
1/4
Connect as below:
Serial Suite: ECU Plug:
Red to 2 Pins Red (Power Supply +12 Volt)Black to 2 Pins Black (Ground)
Piasiniengineering [email protected] – http://www.piasiniengineering.itTel: +39 0342 489060 - Fax: +39 0342 488298
mailto:[email protected]://www.piasiniengineering.it/http://www.piasiniengineering.it/mailto:[email protected]
8/16/2019 Freelander 3.2
2/4
Where to connect the flat cable:
Piasiniengineering [email protected] – http://www.piasiniengineering.itTel: +39 0342 489060 - Fax: +39 0342 488298
mailto:[email protected]://www.piasiniengineering.it/http://www.piasiniengineering.it/mailto:[email protected]
8/16/2019 Freelander 3.2
3/4
READ the ECU:
Picture
1. Connet the flat cable following the number in the picture;2. You have to put 5 wire (bridge) like in the picture.
Piasiniengineering [email protected] – http://www.piasiniengineering.itTel: +39 0342 489060 - Fax: +39 0342 488298
mailto:[email protected]://www.piasiniengineering.it/http://www.piasiniengineering.it/mailto:[email protected]
8/16/2019 Freelander 3.2
4/4
WRITE the ECU:
You have to remove bridge used before(picture 1), put other 2 wire(bridge) like in thepicture, the flat cable is still connect.
Piasiniengineering [email protected] – http://www.piasiniengineering.itTel: +39 0342 489060 - Fax: +39 0342 488298
mailto:[email protected]://www.piasiniengineering.it/http://www.piasiniengineering.it/mailto:[email protected]