FPP meters BROCHURE 1 - Nu-Way Energy...Preset Counter, or an electronic register with preset function, a control valve is required to stop the flow at the end of the selected volume.

• Only 2 Moving Parts • No Metal-to-Metal contact in the measuring chamber • Patented Oval Gear Technology for enhanced accuracy • FPP METERS have the lowest pressure loss in the industry - Minimizing meter wear - Reducing operating costs over the life of your system • Easy to service, most repairs completed while meter remains in-line • Simple to recalibrate • With mechanical or electronic register • 1/4”to 3” models • Flow rates up to 950 LPM • Pressure Rating to 2500 PSI (170 Bar) • Wide variety of accessories, signal conditioners & registration equipment options • There is a meter for every application

TN Nutating

TS Oval gear “Stealth”

TM MiniOval Gear

Aviation Fuels Aviation De-Icing Diesel Fuel Chemicals Fertilizer Gasoline

Petroleum Additives Herbicides Pesticides Wine Automotive Liquids Mining chemicals

Paint & Resins Printing Ink Liquid sugar & syrups Lubricants LPG Glycols, etc.

Applications:Applications:Applications:

Distributors in Australia and New Zealand:

Unit 6 -123 Cryers Road East Tamaki Auckland

14 Ar is toc Rd Glen Waver ley VIC 3150

Web: www.hnw.com.au

E-mail: [email protected] Branches in Sydney, Brisbane and Perth

Hurll Nu-Way Pty Ltd Phone: 1300 556 380 Fax: 03 9560 8992

Web: www.nuwayenergy.com.nz E-mail: [email protected]

Phone: 09 274 5111 Fax: 09 273 6524

2

Distributor in Australia: Hurll Nu-Way Distributor in New Zealand: Nu-Way Energy

• +/- 0.3% over 10:1 turndown • +/- 0.05% repeatability • Flow Rates to 760 lpm • Mechanical or Electronic Registers, with

Optional Preset & Printing Functions • 1", 1½", 2" & 3" Models • Companion Flanges Standard, 150# RF ANSI

Adaptors Optional • Anodized Aluminum or Stainless Steel • PPS Rotors with Carbon or Teflon™ Bearings • Viton™ or Teflon™ Seals

• 400 PSI (28 BAR) MWP with Electronic Register or 150 PSI (10.5 BAR) MWP with Mechanical Register

• Complete Range of Accessories • Strainer & Air Eliminator • Mechanical 2 stage Preset Valve with

Linkage • 1-Stage & 2-Stage Solenoid Valve

• Viscosities to 500,000 SSU (105000 cSt) • 2’’ and 3’’ models are approved by NMI retail

trade

Applications: Applications: Applications: Refined fuels, LPG, heavy fuel oils, glycols, lube oils & petrochemicals

Model Case Material

Size Max. Litre Per Minute

Pressure, PSI

TS10A Hardcoat

anodized Alu-minum

1" 150 150 & 400

TS15A 1½" 230 150 & 400

TS20A 2" 570 150 & 400

TS30A 3" 760 150 & 400

TS10D 303SS 1" 150 2500

TS10D 1" 150 150 & 400

TS15C 1½" 230 150 & 400

TS20C 2" 380 150 & 400

TS30C 3" 760 150 & 290

316SS

3


*STEALTH, 1”-3”, ALUMINIUM

4


*STEALTH, 1”-3”, ALUMINIUM

5


• +/- 0.5% Over 10:1 Turndown • +/- 0.25% Repeatability • Flow Rates to 76 lpm • Gland-less Meters with Electronic Registers,

Local or Remote • 1/4", 3/8", 1/2" & 3/4" Models • NPT or BSP Ports Standard, 150# RF ANSI

Adaptors Optional • Anodized Aluminum or Stainless Steel

• 316 Stainless Steel Shafts • PPS Rotors • Viton™ or Teflon™ Seals • 400 PSI (28 BAR) MWP, 1500 PSI (103 BAR)

MWP & 2500 PSI (172 BAR) MWP • Extensive range of Electronic Signal

Conditioners & Controllers

ApplicationsApplicationsApplications: : : Additive injection service, low flow industrial process, small volume batching, fuel consumption

Model Case Material

Size Max. Litre Per Minute

Pressure, PSI

TM03A Hardcoat anodized

Aluminum

3/8" 11 400

TM04A 1/2" 37 400 & 1500

TM06A 3/4" 75 400 & 1500

TM06C 303SS 3/4" 75 400, 1500 & 2500

TM02D 1/4" 1.15 400 & 1500

TM03D 3/8" 11 400, 1500 & 2500

TM04D 1/2" 37 400, 1500 & 2500

TM06D 3/4" 75 400 & 1500

316SS

6


TN700 series • +/- 1% Over 10:1 Turndown & +/- 0.5%

Repeatability • Flow Rates to 60 GPM (230 lpm) • Mechanical or Electronic Registers • 1" & 1½" Models • NPT or BSP Ports Standard, 150# RF ANSI

Adaptors Optional • Anodized Aluminum Body • PPS Measuring Chamber • Viton™ or Teflon™ Seals • 400 PSI (28 BAR) MWP or 1000 PSI (69 BAR)

MWP, 1’’ model only

TN800 Series • +/- 1% Over 10:1 Turndown & +/- 0.5

Repeatability • Flow Rates to 60 GPM (230 lpm) • Mechanical or Electronic Registers • 1" & 1½" Models • NPT or BSP Ports Standard, 150# RF ANSI

Adaptors Optional • Anodized Aluminum Body • PPS Measuring Chamber • Viton™ or Teflon™ Seals • 150 PSI (10.5 BAR) MWP

Applications: Applications: Applications: Batching, blending, process control and inventory control

Model Size Pressure, PSI

Max. Litre Per Minute

TN740A 1" 400 & 1000

151 TN740A 1½" 400

TN840A 1" or 1½" 150

TN760A 1½" 400 227

TN860A 1½" 150

7


PD meters cannot distinguish between liquid and air/vapors. To avoid recording air/vapors as liquid, in systems where air or vapors might occur in the lines, an air eliminator should be installed immediately before the flow meter.

Anodized Aluminum

Rating: To 150 PSI (15 BAR) at 38°C if venting to atmosphere

Stainless Steel

Rating: To 600 PSI (41 BAR) at 38°C, but restricted to 150 PSI (10.5 BAR) if venting to atmosphere.

It is recommended that every positive displacement flow meter be protected against foreign particles (welding slag, rust, parts breaking off pumps or valves, etc.) with a strainer*.

Standard Strainer, Anodized Aluminum

• 40 mesh Standard • 20 mesh for high viscosity liquids • 100 mesh for petroleum, alcohol &

solvent service

High Capacity Strainer, Anodized Aluminum

Strainer, Stainless Steel

Rating: To 275 PSI (19 BAR) at 38°C

For use with stainless steel meters

Rating: To 400 PSI (28 BAR) at 38°C

Rating: To 150 PSI (10.5 BAR) at 38°C

*Warranty will not be provided unless a strainer is installed upstream of flow meter

For higher viscosity liquids or high flow rates, particularly diesel fuel (2” & 3” model)

Distributors in Australia and New Zealand:

Unit 6 -123 Cryers Road East Tamaki Auckland

14 Ar is toc Rd Glen Waver ley VIC 3150

Web: www.hnw.com.au

E-mail: [email protected] Branches in Sydney, Brisbane and Perth

Hurll Nu-Way Pty Ltd Phone: 1300 556 380 Fax: 03 9560 8992

Web: www.nuwayenergy.com.nz E-mail: [email protected]

Phone: 09 274 5111 Fax: 09 273 6524

Rating: To 150 PSI (10.5 BAR) at 100°F (38°C)

Solenoid Preset Valve

When the flow meter has a Preset Counter, or an electronic register with preset function, a control valve is required to stop the flow at the end of the selected volume. A valve with 2 stage shut-off is required if flow rate exceeds 20 GPM (75 lpm).

Mechanical Preset Valve

This is a 90° valve used in conjunction with a mechanical Preset Counter.

for use with electronic preset & industrial batch controllers.

In systems where a single pump supplies multiple flow meters, Rate-of-Flow control is required to protect individual flow meters against excessive flow rates. Valves can also be used to either sustain or reduce operating pressure, prevent reverse flow, etc

In systems with little backpressure from other components, it might be ne ce ssar y t o a dd a backpressure valve between the strainer and the flow meter.

Backpressure Valve

In some regions there is a tra-dition for, or regulations re-quiring, use of an air check valve in conjunction with the limited bleed version of the Air Eliminator.

Air Check Valve Control Valves for Loading Racks

FPP meters BROCHURE 1 - Nu-Way Energy...Preset Counter, or an electronic register with preset function, a control valve is required to stop the flow at the end of the selected volume.

Documents