This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
x 1
C-11
C-12
C-2
C-3
C-4
1544 kbit/s
2048 kbit/s
6312 kbit/s
VC-11
VC-12
VC-2
VC-3
VC-4STM-1
AU-3
AU-4
34368 kbit/s
VC-3
TU-11
x 4
x 3
x 3
x 3 x 1
x 1
x 1
x 7x 7
TU-12
TU-2
TU-3
C-n
Pointer Processing
MultiplexingAligningMapping
Container-n
139264 kbit/s
TUG-3
AUG
TUG-2
SDH Mapping according G.707
Ag
gre
gat
esTr
ibut
arie
s
UB
US
8
x 2
Mb
it/s
1)
2)
FOX 515 onlyDepends on the V5 protocol type
3) Can also be used as ATM bus. Please contact ABB for more details about ATM features on the FOX platform.
PB
US
40
x 2
Mb
it/s
or
128
x 2
Mb
it/s
(up
gra
de
po
ssib
le);
VC
12
+/-5 VDCPOSUS/POSUMPower Converter–48 VDC
POSUS/POSUM n+1
Control and Power Units
Ext. clock input (2)Clock output (3)
Ext. alarm input (4)Alarm relay output (2)
F-interfaceQ1-interface
Qx-interface UCST
UNEM
COBU < x >
Redundant COBU < x >
8 x 2 Mbit/s
8 x 2 Mbit/s
24 inputel.
8 outputel.
ALCAR24 Alarm Inputs
4 Contact Outputs4 Serial Ports
max. 5 x ALCAR/FOX
EXT. ALARMS
2 x UA, 2 x NA4 x ext. Alarms
V9VKAlarm Module
V9VK
UBUS <—> PBUS interconnectionSynchronizationMIBAlarm IFManagement Communication
Options:- COBUV: includes Voice Conference- 40 or 128 Mbit/s PBUS capacity
CrossconnectDXC Modular non blocking cross connect capacity
40 x 2Mbit/s with COBUX 137; COBUV145 128 x 2Mbit/s with COBUX 237; COBUV146 Cross connections at 64 kBit/s, n x 64k Bit/s and 2 Mbit/s
CapacityUBUS 8 x 2 Mbit/sPBUS 40 or 128 x 2 Mbit/s (upgrade 40 -> 128 possible)SBUS 2 x 2 x VC4FOX-U compatibilityTributary channels Supports up to 240 channels as tributary from UBUS
modulesTraffic protection1+1 protection (n x 64 kBit/s) NEMCA, GECOD SULIC, UNIDA, TEBITLTP SYNAC, SYTELSNCP LOMIF, SYNACMSP SYNIOAmbient conditionsStorage Acc ETSI 300 019-1-1 class 1.2
–25° C..+55° CTransport Temperature ranges Acc ETS 300 019-1-2 class 2.2 –unventilated enclosures –25° C..+70° C –ventilated enclosures / outdoor –25° C..+40° C Vibration ASD @ 10..200Hz 1.0 m2s-3 ASD @ 200..2000Hz 0.3 m2s-3Operation Acc ETS 300 019-1-3 class 3.2Operation temperature operational applications –5° C up to 55° CxDSL, ISDN and ATM applications –5° C up to 45° CHumidity 95% non condensingMechanical dimensionsSubrack with front cover (WxHxD) 482.6 x 308.2 x 303 mmCable tray (WxHxD) 482.6 x 87.1 x 240 mmHeat deflection shield (WxHxD) 482.6 x 87.8 x 237 mmNumber of available slots 21 (including 1 or 2 slots for COBU<x>)TypetestsKEMA Typetest 98430060-tdp 99-1010Power SupplyVoltage -48 VDC (-40.5..-57 VDC) -60 VDC (-50.5..-72 VDC)With POSUA 115 VAC (88 VAC 132 VAC)With POSUA 230 VAC (176 VAC 264 VAC)DependabilityMADT (Mean Accumulated Down TimeTraffic between any 2 Mbit/s ports) <10’ per yearMTTF > 20 years per unit
CrossconnectDXC Modular non blocking cross connect capacity
40 x 2 Mbit/s with COBUX 137; COBUV145 128 x 2 Mbit/s with COBUX 237; COBUV146 Cross connections at 64kBit/s, n x 64 kBit/s and 2 Mbit/s
CapacityUBUS 8 x 2 Mbit/sPBUS 40 or 128 x 2 Mbit/s (upgrade 40->128 possible)SBUS 2 x 2 x VC4FOX-U compatibilityTributary channels Supports up to 240 channels as tributary from UBUS
modulesTraffic protection1+1 protection (n x 64kBit/s) NEMCA, GECOD SULIC, UNIDA, TEBITLTP SYNAC, SYTELSNCP LOMIF, SYNACMSP (Multiplex Section Protection) SYNIOAmbient conditionsStorage Acc ETSI 300 019-1-1 class 1.2
–25° C..+55° CTransport Temperature ranges Acc ETS 300 019-1-2 class 2.2 –unventilated enclosures –25° C..+70° C –ventilated enclosures / outdoor –25° C..+40° C Vibration ASD @ 10..200Hz 1.0 m2s-3 ASD @ 200..2000Hz 0.3 m2s-3Operation Acc ETS 300 019-1-3 class 3.2Temperature range system (extended) –20° C..+55° C with old UBUS units –10° C .. +55° CStart up temperature –20° C with old UBUS units –5° CHumidity 95% non condensingMechanical dimensionsSubrack with front cover (W x H x D) 482.6 x 177x 283 mmNumber of available slots 8Power SupplyVoltage -48 VDC (-40.5..-57 VDC)
–60 VDC (–50.5..-72 VDC)With POSUA 115 VAC (88 VAC 132 VAC)With POSUA 230 VAC (176 VAC 264 VAC)Power ConsumptionMax Power Consumption- -48 VDC 144 W- -60 VDC 180 W– Mains Power Interface 180 WDependabilityMTTF > 20 years per unit
Maximum number of modules per FOX 5Module width 1POSUS Power supplyInternal supply voltage 5 VSupplied power 50 WModule width 1POSUM Power supplyInternal supply voltage 5 VSupplied power 85 WModule width 1Dual power feeder (FOX 515 only)Number of power sources 2Feeding voltage 48 VDCPOSUANominal input voltage 115 VAC (88 VAC 132 VAC) 220 VAC (176 VAC 264 VAC)Frequency 45..63 HzMax. converted power 140 WMax. consumed power 180 WCharger interface (battery connected)nominal voltage @ 20° C: -54.6 VDCtemperature compensation (-10° C +50° C) +72 mV/° Cdeviation of compensated voltage < 2 %Module width 2BATMO DC Battery backup interface (FOX 512 only)Interface Access POSUAFANUV (FOX 515)Number of fans 3Operation temperature controlled
(<30° C low speed/>50° C high speed)Installation Does not require a “Unit”-SlotFANU2 (FOX 512)Number of fans 2Operation temperature controlled
(<30° C low speed/>50° C high speed)Installation Does not require a “Unit”-Slot
TECHNICAL DATA OF FOX-512 & FOX-515
1KH
A -
000
744
- S
EN
10
00
11.0
4 P
rinte
d in
Sw
itzer
land
SDH MODULES
SYNIO STM1 optical aggregateInterface type STM-1 Aggregate S1.1 L1.1 L1.2Wavelength 1310 nm 1310 nm 1550 nmLaunched power -10 ± 2 dBm –2 ± 2 dBm -2 ± 2 dBm Minimum sensitivity -38 dBm -38 dBm -38 dBmAttenuation range 24 dB 32 dB 32 dBNumber of ports 2Connector type E2000 (type LSH-HRL)Module width 2SYNIF STM1 optical aggregateInterface type STM-1 aggregate S1.1 L1.1 L1.2Wavelength 1310 nm 1310 nm 1550 nmLaunched power ±-10 ± 2 dBm -2 ± 2 dBm -2 ± 2 dBm Minimum sensitivity -38 dBm -38 dBm -38 dBmAttenuation range 24 dB 32 dB 32 dBNumber of ports 1Connector type E2000 (type LSH-HRL)Module width 1SYNOTInterface type STM-1 Tributary, S1.1 L1.1 L1.2Wavelength 1310 nm 1310 nm 1550 nmLaunched power –10 ± 2 dBm –2 ± 2 dBm –2 ± 2 dBmMinimum sensitivity -38 dBm -38 dBm -38 dBmAttenuation range 24 dB 32 dB 32 dBNumber of ports 1Connector type E2000 (type LSH-HRL)Module width 1SYNICInterface type STM-1 electricalNumber of ports 1Code CMIImpedance 75 Ω asymmetricsignal attenuation 0..12.7 dB @78 MHzJitter Acc. G.825Connector type Coaxial, 75 Ω Series 1.6/5.6 msModule width 1SYNAC VC 12 terminationCapacity 8 x VC12 terminationPath protection LTP supportedModule width 1SYNVACapacity 32 x VC12 SBUS<->PBUS interconnectionInterface type No physical interfaceModule width 1SYNAMInterface Type G.703,Bitrate 2048 kBit/s ± 50 ppmLine impedance 75 Ω asymmetrical or 120 Ω symmetricalNumber of interfaces per module 8Traffic protection LTP on VC12Performance monitoring Acc. G.826Module width 1SYNADInterface type G.703,Bitrate 2048 kBit/s ± 50 ppmLine impedance 75 Ω asymmetrical or 120 Ω symmetricalNumber of interfaces per module 16Traffic protection LTP on VC12Performance monitoring Acc. G.826Module width 1SYTELInterface type 34/45 Mbit/s tributary interfaceLine impedance -Number of interfaces per module 1Traffic protection LTPModule width 1
PDH OPTICAL MODULES
TUPON 8448 kBit/s optical interfaceInterface type 8 Mbit/s PDHWavelength 1300 nm 1500 nmLaunched power –10 ± 2 dBm –2 ± 2 dBmMinimum sensitivity –40 dBm –40 dBmAttenuation range 26 dB 34 dBNumber of ports 1Connector type E2000 (type LSH-HRL)Optical code MCMI + telemetryNumber of electrical ports 4Interface type G.703Module width 1TUNOR 8448 kBit/s optical desktopMultiplexing procedure G.742Transmission code MCMI + telemetryAllowed fibre attenuation Up to 20 dB (approx. 30 km)Optical wavelength 1300 nmNumber of optical ports 1Connector type FC/PCNumber of electrical ports 4Interface type G.703Module width 1
PDH ELECTRICAL MODULES
LOMIF 2 Mbit/s electrical interface:Interface type G.703,Bitrate 2048 kBit/s ± 50 ppmLine impedance 75 Ω asymmetrical or 120 Ω symmetricalNumber of interfaces per module 8Traffic protection Subnetwork connection protection at 2 Mbit/sPerformance monitoring Acc. G.826Module width 1LOMI4 2 Mbit/s electrical interfaceInterface type G.703,Bitrate 2048 kBit/s ± 50 ppmLine impedance 75 Ω asymmetrical or 120 Ω symmetricalNumber of interfaces per module 4Traffic protection Subnetwork connection protection at 2 Mbit/sPerformance monitoring Acc. G.826Module width 1
HDSL MODULES
LEMU6 HDSL module for SOHONumber of DSL interfaces 6 x 1 pairLine code CAPLine bit rates 128..2048 kBit/sTransmission range Up to 16 km Performance monitoring Acc. G.826Additional features Bridging, with diverse sub modes
IP static routing IP OSPF V2 dynamic routing Unnumbered IP links on DSL and PBUS interfaces Frame relay FRAD functionality DHCP relay configurable for SOHO IP managed bridge configurable for SOHO
Module width 1LESA8Number of DSL interfaces 8 x 1pair or 4 x 2 pairLine code CAP, 2B1Q, PAM16, G.SHDSLLine bit rates 2 x 1168 or 1 x 2048 kBit/sTransmission range Up to 16 kmTransmission mode 1pair, 2pair or mixedPerformance monitoring Acc. G.826Remote powering Not supportedModule width 1SLIM1Number of DSL interfaces 2 x 1 pair or 2 x 2pairLine code CAP, 2B1Q, PAM16Line bit rates 2 x 1168 or 1 x 2048 kBit/sTransmission range Up to 16 km Transmission mode 1pair, 2pair or mixedNumber of G.703 interfaces 2 x E1/G.703Performance monitoring Acc. G.826Remote powering Not supported Module width 1SLIM2Number of DSL interfaces 2 x 1 pair or 2 x 2pairLine code CAP, 2B1Q, PAM16Line bit rates 2 x 1168 or 1 x 2048 kBit/sTransmission range Up to 16 km Transmission mode 1pair, 2pair or mixedNumber of G.703 interfaces 2 x E1/G.703Performance monitoring Acc. G.826Remote powering Supported on two ports (2pair mode)Module width 1LECAR HDSL modemInterfaces G.703 / G.704; X.21 / V.11,
V.35, V.36, LAN 1 x 10BaseT (with bridge IEEE 802.1d / router)
Line code CAPDimensions 240 x 42 x 280 mmMUSIC 100 (SOHO) HDSL modemInterfaces LAN 4 x 10BaseT (with bridge IEEE 802.1d / Router)WAN interface Cc. Q.920, Q.921, Q.922MUSIC 200 (LESAR) HDSL modemInterfaces 2DSL ports
Line code CAP, 2B1Q, PAM16, G.SHDSLTransmission mode 1 and 2 pair serviceVC12 to the desktop SupportedRemote powering Not suportedLocal power supply AC or DC supported
pulse dialling, DTMF without accompanying signal, earth key, charging using 12/16 kHz pulses
Module width 2NEMCA NF interfaces with E&M signallingITU-T coding A-law G.711Characteristics of voice channels G.712-G.715Channel bandwidth 300..3400 HzNumber of interfaces 8E&M Signalling signalling type Type II; signalling circuits E, M, E’, M’ Module width 1
PSTN MODULES
PHLC1 Subscriber line interfacesITU-T coding A-law acc. G.711Characteristics of 2 wire voice channels Q.552Number of interfaces 60 ports a/bNominal impedance ProgrammableChannel bandwidth 300..3400 HzModes V5.x, MCAS, carrier adapter, phone-exchange
Full test for subscriber lines is included Ring over b-wire
Full test for subscriber lines is included Ring over b-wire
Module width 2 (PHLC2), 1 (SUBH3)PHLC3/SUBH1 Subscriber line interfacesITU-T coding A-law acc. G.711Characteristics of 2 wire voice channels Q.552Number of interfaces 10 ports a/bNominal impedance ProgrammableChannel bandwidth 300..3400 HzModes V5.x, MCAS, carrier adapter, phone-exchange Full test for subscriber lines is included Ring over b-wireModule width 2 (PHLC3), 1 (SUBH1)PCONV V5x Protocol converterSupported protocols V5.1, V5.2Number of E1 interfaces 2 x 2 Mbit/sV.5.1 interfaces (= links) 4V.5.2 interfaces 1V.5.2 link 2PSTN user ports 240ISDN-BA user ports 112 including
- processing of p- and f-data - digital leased lines
Module width 1PCON2 V5x Protocol converterSupported protocols V5.1, V5.2Number of E1 interfaces 2 x 2 Mbit/sV.5.1 interfaces (= links) 10V.5.2 interfaces 1V.5.2 links 8PSTN user ports 480 ISDN-BA user ports 224 including - processing of p- and f-data - digital leased linesModule width 1
Ethernet / TCP/IP MODULES
NEBROInterface type Ethernet 10/100 BaseTNumber of interfaces 4Interface type Ethernet 100 Base FX/GbENumber of interfaces 2 cages supporting SFPSwitching 8 local WAN portsAdditional features ITU-T G.707–Virtual concatenation
ITU-T G.7041– GFP ITU-T G.7043 – LCAS
SBUS capacity Up to 63xVC–12/3xVC–3Module width 1LAWA4Interface type Ethernet 10BaseTNumber of interfaces 1Routing protocol OSPF V2Additional features Layer 2 or 3 IP concentration
Frame Relay FRAD functionality Static routing Support of VLAN (port based, TDM or IEEE 802.1q)
PBUS / router capacity 2 x 2 Mbit/sBridges up to 7Module width 1ETHUBInterface type Ethernet 10/100BaseTNumber of interfaces 5Module width 1LEMU6(see HDSL Modules) (see HDSL Modules)
DATA MODULES
GECOD 64 kBit/s G.703 codirectionalITU-T recommendation G.703Bit rate 64 kBit/s codirectionalNumber of interfaces 8Module width 1UNIDA 431 Data interfaces n x 64 kBit/sInterface type V.24 / V.28, RS232 Bitrate 0..0.3 kBit/s transp (V.110)
48, 56, n x 64 kBit/s (n=1..4) synch (V.110)Options 1+1,
Subrate multiplexing, Point-Multipoint
Number of interfaces 4Module width 1UNIDA 432 Data interfaces n x 64 kBit/sInterface type V.35Bitrate 0.6..38.4 synch / asynch (V.110)
48, 56, n x 64 kBit/s (n=1..31) synch (V.110)Options 1+1,
Number of interfaces 2Module width 1UNIDA 435 Data interfaces n x 64 kBit/sInterface type V.36 RS-449Bitrate (circuits 140,141,142 not supported -> use UNIDA434)
0.6..38.4 synch / asynch (V.110) 48, 56, n x 64 kBit/s (n=1..31) synch (V.110)
NTU remote Power Supply 48 V or 96 VNumber of interfaces: SULIC: 8 x NTU 1Dimensions Aluminium Housing 254 x 196 x 42 mm Plastic Housing 165 x 162 x 35 mm
ISDN MODULES
EXLICTransmission code 2B1QNumber of timeslots per subscriber 2.5NT-1 remote power supply 96 VNumber of Uk0 interfaces 8Module width 1ISBUQ ISDN Basic access U interface 2B1QNumber of U interfaces 8
Line code 2B1QPower feeding of NT1 SupportedInteroperation with EXLIC Not supportedInteroperation with PCON<X> SupportedLeased lines (ISBUQ-ISBUQ) Not supportedModule width 1ISBUTNumber of U interfaces 8Line code 4B3TPower feeding of NT1 SupportedInteroperation with PCON<X> SupportedLeased lines (ISBUT-ISBUT) SupportedModule width 1SULISTransmission code 2B1QNumber of timeslots per subscriber 2.5NT-1 remote power supply 96 VNumber of Uk0 interfaces 8Module width 1
TELEPROTECTION MODULES
OTERM Optical interfaceInterface type Complies to IEC 60870-5-1
Format F1.2 NSD570, NSD70D, FOX6+, FOX20 REL316, REL551, REL561, etc.
Number of interfaces 1 Optical (1300 nm) 1 RS232 (FOX6+ compatible)
Optical code MCMIModule width 1TEBIT Teleprotection interfaceTeleprotection Complies to IEC 60834 -1Voltage range 24..250 VDC Propagation delay time Typ. 3.5 ms (optimised for speed, 24..125 V)1+1 switch over time Typ. 3.5 msNumber of interfaces 4 independent commands
BinaryVoltage range 24..60 VDCNumber of interfaces 8 Binary contactsIEC standard Complies to IEC 60834 -3 Module width 1
ELEMENT MANAGER
ATM MODULES FOX 515 offers also ATM functionality. Please contact ABB for more details about ATM features on the FOX platform.
UCSTUCST Element manager for local as well as remote
configuration of FOX-U and FOX 515Supported platforms UCST R5: Windows 98, NT, ME & 2000Supported NE FOX 515, FOX 512, FOX-U, FOX-U/M
NETWORK MANAGEMENT
UNEMUNEM Network manager with graphical display for element and
networkSupported NE FOX 515, FOX 512, FOX-U, FOX-U/M
CAP Carrierless Amplitude and PhaseCMI Code Mark InversionDSL Digital Subscriber LineDXC Digital Cross ConnectECC Embedded Communication ChannelGbE Gigabit EthernetGFP Generic Framing ProcedureHDSL High Bitrate Data Subscriber LineLCAS Link Capacity Adjustment SchemeLTP Line Trail ProtectionMCAS Mercury Channel Associated SignallingMCMI Multi Code Mark InversionMIB Management Information BaseMSP Multiplex Section ProtectionNA Non Urgent AlarmNE Network ElementOHC Overhaed ChannelOSPF Open Shortest Path FirstPDH Plesichronous Digital HierarchySDH Synchronous Digital HierarchySETS Synchronous Equipment Timing SourceSFP Small Form-factor PlugableSNCP Sub-Network Connection ProtectionSTM Synchronous Transport ModuleUA Urgent AlarmVC Virtual Container