FORESTRY Price list 15
F O R E S T R Y Price l ist
15
NEW AGRICULTURAL AND FORESTRY AGE
U N I Q U E
E F F I C I E N T
S T R O N G
D I F F E R E N T
I N N O V AT I V E
4
22
MULCHERS
ROTARY BRUSH CUTTERS
38ANNEXES
ale (HIGH STReNGTH STeel)The steel has two main parts in their behavior, the elastic and plastic. The elastic part is a steel enabling a deformation and subjecting this to recover its initial properties. When we apply a force in the steel and it crosses the line between elastic and plastic, it will be deformed permanently. Each steel has a load value in the passing of the elastic to the plastic zone. The high strength steels have a high values in this load. The A.L.E. cold forming steel has a yield stress value (point from which appears the deformation), which duplicates the value of a traditional steel. TMC Cancela incorporates A.L.E. steel in the frame of its machines to provide an extra quality, avoiding cracks and breaks in the most demanding working conditions.
Hdx (WeaR ReSISTaNT STeel)It’s a steel that has in its composition many elements which give excellent properties against abrasion and wear without compromising important steel factors such as bending and welding. The wear-resistant values increase steel double lifetime with respect to traditional steel. Wear-resistant TMC Cancela steels incorporate all the elements that are in direct contact with the ground, such as skates, plates, inner shells and counterblades.
fTS (faN TRaNSMISSION SYSTeM)System of refrigeration incorporated in the pulleys of the mulchers in order to evacuate the heat of the pulleys and drive transmission during the operation.
dUal SpeedSystem that allows to change the input speed configuration in the gearbox interchanging the position of the pulleys. With this system we can work with different tractors and change quickly the input speed in the machine. With PTO to 540 rpm we get a leverage ratio in the pulleys (the bigger pulley is the drive one). With 1.000 rpm input we need a reduction ratio for obtaining the same rotor speed. In this case the drive pulley is the small one. This system ensures the work with any type of tractor and switch from one speed input to another quickly.
WIdeST Patented side openings in rotary brush cutter skids for maximum utilization of working width of the machine. At the same time a better mulching of the material is ensured due to the blockage in the cavity created in the opening “window”.
eSb (exTeRNal SHafT beaRING)Built-in system applied to the side extension shafts of the gearbox and drive lines. The bearing of of the transmission extension is positioned on the side of the frame ensuring a very close distance between the pulley and this bearing, reducing dramatically the bending in the shaft. This will increases the life of the shaft, reduce the bearing loads and consequently also decrease the temperature in the drive line.
bOlTOpSystem for assemblying the hammers to the rotor with special socket connection between bolts and lugs. The bolt head is completely embedded into the lug and ensures a precise fit, preventing rotation and loosening. The bolts are 10.9 quality and Ø27 mm with lock nut. This is the most robust assembly system in the market for swinging hammers, ensuring no bolts breakage and avoiding downtimes during work.
zMZero Maintenance patented system, built at the joint between central and lateral gearboxes of agricultural and forestry rotary brush cutters. Ensures zero maintenance on connections through a special adjustment joint between two grooved tapered shafts.
flOaTDamping system incorporated in the three point hitch of the agricultural mulchers with lateral parallelogram displacement, which enables the decoupling of the tractor linkage and the adaptation of the machine to the ground. This system eliminates the traditional bolt joint which was very problematic and created many breaks and deformations. This new system allows to built a three point hitch much more robust according to expectations and demands of the machine. A double advantage is obtained with this device: acts as a damping system and reduces the impact on the frame of the machine and on the tractor lifting arms, especially when driving at high speed during transport by roads.
SIdeSTepSystem for overcoming obstacles on the sides of forestry and agricultural mulchers. The pulleys surround plates are rigid and the reinforcement fairings make a wedge effect ensuring the lateral rigidity while avoiding obstacles snagging during work. This system reinvented traditional caps that did not act like a real protection, only made the barrier function between pulleys and the environment, but the impacts in some cases bended the cover causing serious problems to the drive line. With the Sidestep, the impacts to the sideways of the machines translate into simple happenings of daily work without any inconvenience to the integrity of the drive line.
flOW UpFlow Up is a cutting system consisting in blades with flaps that cause a suction of the material (grass, low brush…) in the back part of the cutting area, ensuring a better and cleaner cut. These blades are assembled to concave plate with bolts and bushes. The special shape of the rotor ensures optimum sliding as close to the ground as possible without damaging the topsoil. Assembled in the range of rotary brush cutters intended for green spaces, large areas and farming works.
TMC
SYST
EMS
MULCHERS
CV
cmWORKING WIdTH
MOd. 060
150
160
180
190
200
210
225
250
pg.
TFS • • • 70-110 6
TFS2 • • 90-130 8
TFK • • • • 100-180 10
TFX • • • • • 130-250 12
TFZ • • • 150-300 14
TFT • • 200-360 16
TFR • 300-500 18
TFC • 150-250 20
060
150
160
180
190
200
210
225
250
0TARIFA TMC CANCELA 2015www.tmccancela.com |+34 981 695 232
MULCHER
www.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m 76
TMC CANCELA FORESTRY PRICE LISTTMC CANCELA FORESTRY PRICE LIST
MOD. TFS-150 TFS-180 TFS-200
TECHNICAL FEATURES
Working width (m) 1,50 1,80 2,00
Total width (m) 1,88 2,18 2,38
Required input power (Hp) 70 80 95
Max. allowed power (Hp) 110
Rotor cutting diameter (mm) 413
Gearbox input speed (rpm) 540
Nr. of hammersf03 34 42 46
f04 2 2 2
Counterblades 3 fixed rows
Coupling category Cat. 2
Nr. of belts - type 6 - xpb
Skids bolted adjustable (2 positions)
pTO shaft bondioli SH type
Weight (kg) 1.172 1.284 1.351
REF. MOD. HM7X15 HM7X18 HM7X20
OPTIONS
050 Mechanical rear pushing frame
254 Skids to work a little bit deeper
KM1.F03.7X Maintenance basic kit (2 hammers + 4 bolts + grease) KM2.F03.7X Maintenance kit (basic kit + 6 belts)
Ø 250 mm
01 Body built in high strength steel.
02 4 chain curtains for front protection and 2 chain curtains on rear hood.
03 Hydraulic hood to improve the material entrance.
04 Sidestep system on body sides.
05 Toolbox compartment built-in frame.
06 Skids with 2 height positions.
07 Rotor with fixed hammers with helical disposition.
08 Transmission with 6 XPB belts.
09 Gearbox with built-in free-wheel, input to 540 rpm and 1”3/4 Z6.
10 Reinforced PTO shaft.
11 Hammers with 2 carbide tips model F03 + F04.
B E L T Sx6
TFS
F03
F04
01
05
02
03
06
04
06
02
0907
0TARIFA TMC CANCELA 2015www.tmccancela.com |+34 981 695 232
MULCHER
www.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m 98
TMC CANCELA FORESTRY PRICE LISTTMC CANCELA FORESTRY PRICE LIST
Ø 275 mm
MOD. TFS2-180 TFS2-200
TECHNICAL FEATURES
Working width (m) 1,80 2,00
Total width (m) 2,29 2,49
Required input power (Hp) 110 125
Max. allowed power (Hp) 140
Rotor cutting diameter (mm) 413
Gearbox input speed (rpm) 1.000
Nr. of hammersf03 42 46
f04 2 2
Counterblades 3 fixed rows
Coupling category Cat. 2
Nr. of belts - type 12 xpb
Skidsbolted adjustable
(2 positions)
pTO shaft bondioli SH type
Weight (kg) 1.531 1.602
REF. MOD. HM8V18 HM8V20
OPTIONS
050 Mechanical rear pushing frame
254 Skids to work a little bit deeper
KM1.F03.8V Maintenance basic kit (2 hammers + 4 bolts + grease) KM2.F03.8V Maintenance kit (basic kit + 12 XPB belts)
01 Body built in high strength steel.
02 4 chain curtains for front protection and 2 chain curtains on rear hood.
03 Hydraulic hood to improve the material entrance.
04 Sidestep system on body sides.
05 Skids with 2 height positions.
06 Rotor with fixed hammers with helical disposition.
07 Transmission with 12 XPB belts and ESB system.
08 Gearbox with built-in free-wheel, input to 1.000 rpm and 1”3/4 Z6.
09 Reinforced PTO shaft.
10 Hammers with 2 carbide tips model F03 + F04.
TFS2B E L T Sx6
B E L T Sx6 + F0
3
F04
01
05
03
04
02
03 06
0TARIFA TMC CANCELA 2015www.tmccancela.com |+34 981 695 232
MULCHER
www.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m 1110
TMC CANCELA FORESTRY PRICE LISTTMC CANCELA FORESTRY PRICE LIST
MOD. TFK-160 TFK-180 TFK-200 TFK-225
TECHNICAL FEATURES
Working width (m) 1,60 1,80 2,00 2,25
Total width (m) 2,06 2,26 2,46 2,71
Required input power (Hp) 100 120 130 145
Max. allowed power (Hp) 180
Rotor cutting diameter (mm) 455
Gearbox input speed (rpm) 1.000
Nr. of hammersf03 36 44 48 54
f04 2 2 2 2
Counterblades 2 fixed rows + 2 replaceable rows
Coupling category Cat. 2
Nr. of belts - type 10 - xpb
Skids bolted adjustable (2 positions)
Transmission bondioli SH type
Weight (kg) 1.520 1.625 1.745 1.910
REF. MOD. HM9W16 HM9W18 HM9W20 HM9W03
OPTIONS
120 Mechanical rear pushing frame
121 Hydraulic rear pushing frame with raker teeth
254 Skids to work a little bit deeper
KM1.F03.9W Maintenance basic kit (2 hammers + 4 bolts + grease) KM2.F03.9W Maintenance kit (basic kit + 10 XPB belts)
Ø 325 mm
01 Body built in high strength steel with special design in the front for improving the
material entrance.
02 4 chain curtains for front protection + 1 extra chain curtains in the middle area.
03 Coupling to tractor Cat. 2 with fast coupling balls.
04 Hydraulic hood to improve the material entrance.
05 Sidestep system on body sides.
06 Skids with 2 height positions.
07 Rotor with fixed hammers with helical disposition.
08 Transmission with 10 XPB belts and ESB system.
09 Gearbox with built-in free-wheel, input to 1.000 rpm and 1”3/4 Z6.
10 Reinforced PTO shaft.
11 Hammers with 2 carbide tips model F03 + F04.
12 2 replaceable rows of counterblades.
TFKB E L T Sx5
B E L T Sx5 + F0
3
F04
02
03
05
01
06
04
05
0706
0TARIFA TMC CANCELA 2015www.tmccancela.com |+34 981 695 232
MULCHER
www.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m 1312
TMC CANCELA FORESTRY PRICE LISTTMC CANCELA FORESTRY PRICE LIST
MOD. TFX-160 TFX-180 TFX-200 TFX-225 TFX-250
TECHNICAL FEATURES
Working width (m) 1,60 1,80 2,00 2,25 2,50
Total width (m) 2,09 2,29 2,49 2,74 2,99
Required input power (Hp) 130 140 145 160 180
Max. allowed power (Hp) 250
Rotor cutting diameter (mm) 508
Gearbox input speed (rpm) 1.000
Nº de hammersf03 36 44 48 54 58
f04 2 2 2 2 2
Counterblades 3 fixed rows
Coupling category Cat. 2
Nr. of belts - type 12 - xpb
Skids bolted adjustable (2 positions)
pTO shaft bondioli SH type
Weight (kg) 1.926 2.098 2.178 2.271 2.374
REF. MOD. HM8X16 HM8X18 HM8X20 HM8X03 HM8X25
OPTIONS
051 Mechanical rear pushing frame
052 Hydraulic rear pushing frame with raker teeth
254 Skids to work a little bit deeper
KM1.F03.8X Maintenance basic kit (2 hammers + 4 bolts + grease) KM2.F03.8X Maintenance kit (basic kit + 12 XPB belts)
Ø 375 mm
01 Body built in high strength steel with special design in the front to improve the
material entrance.
02 Chain curtains for front protection + extra chain curtains in the middle area.
03 Coupling to tractor Cat. 2 with fast coupling balls.
04 Hydraulic hood to improve the material entrance.
05 Sidestep system on body sides.
06 Skids with 2 height positions.
07 Rotor with fixed hammers double helical disposition.
08 Transmission with 12 XPB belts and ESB system.
09 Gearbox with built-in free-wheel, input to 1.000 rpm and 1”3/4 Z6.
10 Reinforced PTO shaft.
11 Hammers with 2 carbide tips model F03 + F04.
TFX
F03
F04
02
05
06
04
07
05
0601-02
B E L T Sx6
B E L T Sx6 +
0TARIFA TMC CANCELA 2015www.tmccancela.com |+34 981 695 232
MULCHER
www.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m 1514
TMC CANCELA FORESTRY PRICE LISTTMC CANCELA FORESTRY PRICE LIST
MOD. TFZ-200 TFZ-225 TFZ-250
TECHNICAL FEATURES
Working width (m) 2,00 2,25 2,50
Total width (m) 2,49 2,74 2,99
Required input power (Hp) 170 180 200
Max. allowed power (Hp) 250
Rotor cutting diameter (mm) 575,5
Gearbox input speed (rpm) 1.000
Nr. of hammersf05 (Stump) / f11 (Heavy) 34 40 46
f13 (Stump) / f12 (Heavy) 2 2 2
Counterblades 1 fixed row + 4 replaceable rows
Coupling category Cat. 3N
Nr. of belts - type 12 - xpb
Skids bolted adjustable (2 positions)
pTO shaft bondioli SH type
Weight (kg) 2.884 3.004 3.148
REF. MOD. HM5U20 HM5U03 HM5U25
OPTIONS
051 Mechanical rear pushing frame
052 Hydraulic rear pushing frame with raker teeth
055 Kit turbo
057 Skids for deeper work*
243 Rotor Heavy (hammers F11 + F12)
244 Rotor Super (hammers F03 + F04)
245 Rotor Multi (hammers F01 + F04)
KM1.F05.5U Maintenance basic kit (2 hammers F05 + 2 bolts + grease) KM2.F05.5U Maintenance kit (basic kit + 12 XPB belts) KM1.F03.5U Maintenance basic kit (2 hammers F03 + 2 bolts + grease) KM2.F03.5U Maintenance kit (basic kit + 12 XPB belts) KM1.F11.5U Maintenance basic kit (2 hammers F11 + 2 bolts + grease) KM2.F11.5U Maintenance kit (basic kit + 12 XPB belts)
01 Body built in high strength steel with special design in the front to improve the
material entrance.
02 4 chain curtains for front protection + 2 extra chain curtains in the middle.
03 Coupling to tractor Cat. 3N with fast coupling balls.
04 3rd hydraulic point with permanent aligning device (patent pending).
05 Hydraulic hood with “Superfinish” system.
06 Sidestep system on body sides.
07 Skids with 2 height positions and side protection.
08 Rotor with replaceable shafts, with fixed hammers with helical disposition.
09 Hammers with carbide tips and different configurations.
10 Transmission with 12 XPB belts and ESB system.
11 Gearbox with built-in free-wheel, input to 1.000 rpm and 1”3/4 Z6.
12 Reinforced PTO shaft.
13 Replaceable counterblades on body frame and on hydraulic hood.
14 Hammers with 3 carbide tips TMC Cancela F05+F13 (standard).
TFZB E L T Sx6
B E L T Sx6 +
05
06
07
08
Ø 500 mm
F11
F12
F01
F03
F04
F05
MultiSuper
Stump
Heavy
F13
04
0106
02
* This option excludes the Turbo Kit
0TARIFA TMC CANCELA 2015www.tmccancela.com |+34 981 695 232
MULCHER
www.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m 1716
TMC CANCELA FORESTRY PRICE LISTTMC CANCELA FORESTRY PRICE LIST
MOD. TFT-225 TFT-250
TECHNICAL FEATURES
Working width (m) 2,25 2,50
Total width (m) 2,85 3,10
Required input power (Hp) 200 250
Max. allowed power (Hp) 360 360
Rotor cutting diameter (mm) 632,5
Gearbox input speed (rpm) 1.000
Nr. of hammersf05 (Stump) / f11 (Heavy) 40 46
f13 (Stump) / f12 (Heavy) 2 2
Counterblades 1 fixed row + 4 replaceable rows
Coupling category Cat. 3
Nr. of belts - type 12 - xpC
Skidsbolted adjustable
(2 positions)
pTO shaft bondioli SH type
Weight (kg) 3.178 3.295
REF. MOD. HM0X03 HM0X25
OPTIONS
122 Mechanical rear pushing frame
123 Hydraulic rear pushing frame with raker teeth
055 Kit turbo
057 Skids for deeper work*
243 Rotor Heavy (hammers F11 + F12)
244 Rotor Super (hammers F03 + F04)
245 Rotor Multi (hammers F01 + F04)
KM1.F05.0X Maintenance basic kit (2 hammers F05 + 4 bolts + grease) KM2.F05.0X Maintenance kit (basic kit + 12 belts XPC) KM1.F03.0X Maintenance basic kit (2 hammers F03 + 4 bolts + grease) KM2.F03.0X Maintenance kit (basic kit + 12 belts XPC) KM1.F11.0X Maintenance basic kit (2 hammers F11 + 4 bolts + grease) KM2.F11.0X Maintenance kit (basic kit + 12 belts XPC)
01 Body built in high strength steel with special design in the front
to improve the material entrance.
02 4 chain curtains for front protection + 4 extra chain curtains in the middle.
03 Coupling to tractor Cat. 3 with fast coupling balls.
04 3rd hydraulic point with permanent aligning device (patent pending).
05 Hydraulic hood with “Superfinish” system.
06 Sidestep system on body sides.
07 Skids with 2 height positions and side protection.
08 Rotor with replaceable shafts, with fixed hammers with helical disposition.
09 Hammers with carbide tips and different configurations.
10 Transmission with 12 XPC belts and ESB system.
11 Gearbox with built-in free-wheel, input to 1.000 rpm and 1”3/4 Z20.
12 Reinforced PTO shaft.
13 Replaceable counterblades on body frame and on hydraulic hood.
14 Hammers with 3 carbide tips TMC Cancela F05+F13 (standard).
TFTB E L T Sx6
B E L T Sx6 +
01
05
06
07
01 03 08
F11
F12
F01
F03
F04
F05
MultiSuper
Stump
Heavy
Ø 600 mm
F13
* This option excludes the Turbo Kit0604
02
0TARIFA TMC CANCELA 2015www.tmccancela.com |+34 981 695 232
MULCHER
www.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m 1918
TMC CANCELA FORESTRY PRICE LISTTMC CANCELA FORESTRY PRICE LIST
MOD. TFR-225
TECHNICAL FEATURES
Working width (m) 2,25
Total width (m) 2,88
Required input power (Hp) 360
Max. allowed power (Hp) 400
Rotor cutting diameter (mm) 697,5
Gearbox input speed (rpm) 1.000
Nr. of hammersf05 (Stump) /f11 (Heavy) 40
f13 (Stump) /f12 (Heavy) 2
Counterblades
2 fixed rows + 2
replaceable rows
Coupling categoryCat. 3/ Cat
4N
Nr. of belts - type 12 - xpC
Skidsbolted
adjustable(2 positions)
pTO shaft bondioli SH type
Weight (kg) 4.440
REF. MOD. HM1W03
OPTIONS
101 Mechanical rear pushing frame
053 Hydraulic rear pushing frame with raker teeth
055 Kit turbo
057 Skids for deeper work*
124 Kit HD 500 HP
243 Rotor Heavy (hammers F11 + F12)
244 Rotor Super (hammers F03 + F04)
KM1.F05.1W Maintenance basic kit (2 hammers F05 + 4 bolts + grease) KM2.F05.1W Maintenance kit (basic kit + 12 belts XPC) KM1.F03.1W Maintenance basic kit (2 hammers F03 + 4 bolts + grease) KM2.F03.1W Maintenance kit (basic kit + 12 belts XPC) KM1.F11.1W Maintenance basic kit (2 hammers F11 + 4 bolts + grease) KM2.F11.1W Maintenance kit (basic kit + 12 belts XPC)
Ø 700 mm
01 Body built in high strength steel with special design in the front to improve the
material entrance.
02 4 chain curtains for front protection + 4 extra chain curtains in the middle.
03 Coupling to tractor Cat. 3 with fast coupling balls.
04 3rd hydraulic point with permanent aligning device (patent pending).
05 Hydraulic hood with “Superfinish” system.
06 Sidestep system on body sides.
07 Skids with 2 height positions and side protection.
08 Rotor with replaceable shafts, with fixed hammers with helical disposition.
09 Hammers with carbide tips and different configurations.
10 Transmission with 12 XPC belts and ESB system.
11 Gearbox with built-in free-wheel, input to 1.000 rpm and 1”3/4 Z20.
12 Reinforced PTO shaft.
13 Replaceable counterblades on body frame and on hydraulic hood.
14 Hammers with 3 carbide tips TMC Cancela F05+F13 (standard).
TFRB E L T Sx6
B E L T Sx6 +
06
02
F11
F12
F03
F04
F05
SuperStump
Heavy
01
06
05
07
F13
04
* This option excludes the Turbo Kit
0TARIFA TMC CANCELA 2015www.tmccancela.com |+34 981 695 232
MULCHER
www.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m 2120
TMC CANCELA FORESTRY PRICE LISTTMC CANCELA FORESTRY PRICE LIST
MOD. TFC-060
TECHNICAL FEATURES
Working width (m) 0,60
Total width (m) 1,17
Required input power (Hp) 150
Max. allowed power (Hp) 250
Rotor cutting diameter (mm) 905
Gearbox input speed (rpm) 1.000
Nr. of hammersf13 16
f07 6
Coupling category Cat. 2
Nr. of belts - type 12 xpC
SkidsSliding bolted
adjustable height control
Roller with hydraulic
adjustment (as option)
Roller diameter / shaft (mm) 510/55
pTO shaft bondioli SH
Weight (kg) 2.175
REF. MOD. HM2W06
OPTIONS
125 Rear roller for compacting the soil
KM1.F13.2W Maintenance basic kit (2 hammers F13 + 4 bolts + grease) KM2.F13.2W Maintenance kit (basic kit + 12 belts XPC)
01 Body built in high strength steel.
02 4 chain curtains for front protection.
03 Coupling to tractor Cat. 2.
04 Hydraulic rear hood.
05 Sidestep system on body sides.
06 Skids with 2 height positions and side protection.
07 Hardox inner shell in body.
08 Rotor with fixed hammers with helical disposition.
09 Transmission with 12 XPC belts and ESB system.
10 Gearbox with built-in free-wheel, input to 1.000 rpm and 1”3/4 Z26.
11 Reinforced PTO shaft.
12 Hammers with 3 carbide tips model F13 + F07.
TFCB E L T Sx6
B E L T Sx6 +
01
06
02
300 mm depth
Ø 500 mm
F07
08
04
05
F13
ROTARY BRUSH CUTTERS
MOd. 130
140
150
160
170
180
190
200
210
220
240
270
300
320
pg.
D3R • • • • • • 50-100 24
D5R • • • • • 85-300 26
D5F • • 130-300 28
R3 • • • 70-95 30
R4 • • • 85-250 32
R5 • • • • 150-300 34
130
140
150
160
170
180
190
200
210
220
240
270
300
320
cmWORKING WIdTH
CV
ROTARY BRUSH CUTTER
2524
TMC CANCELA FORESTRY PRICE LISTwww.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m
TMC CANCELA FORESTRY PRICE LIST
MOD. D3R-130 D3R-140 D3R-150 D3R-160 D3R-170 D3R-180
TECHNICAL FEATURES
Working width (m) 1,30 1,40 1,50 1,60 1,70 1,80
Total width (m) 1,42 1,52 1,62 1,72 1,82 1,92
Required input power (Hp) 55 60 75 85 90 95
Max. allowed power (Hp) 100
Gearbox input speed (rpm) 540
Nr. of rotors 1
Nr. of chains 4
Coupling category Cat. 2
Skids adjustable in height (3 positions) with Widest system
adjustable height control Skids
pTO shaft pTO shaft with clutch
fix model weight (kg) 476 549 583 628 695 761
Shifting model weight (kg) 563 637 674 721 784 848
Hydraulic cylinder stroke (mm) 400 400 400 500 500 500
Working reachmechanical (mm) 570-730 620-780 670-830 720-880 770-930 820-980
hydraulic (mm) 850-850 900-900 950-950 1.050-1.050 1.100-1.100 1.150-1.150
REF. FIX MODEL VM9B13 VM9B14 VM9B15 VM9B16 VM9B17 VM9B18
REF. SHIFTING MODEL VM0B13 VM0B14 VM0B15 VM0B16 VM0B17 VM0B18
01 Body with internal reinforcements.
02 Front and rear chain curtains for protection.
03 Adjustable in height rounded skids with Widest system.
04 Rear bent pins for guiding the brush when working backwards.
05 Three point linkage made of steel sheet with steel plate tensioners.
06 Hydraulic shifting three point linkage with nylon bushes for guiding
(shifting models).
07 Rotor with 2 cutting height levels.
08 Chains assembled to the rotor with connecting links.
09 PTO shaft with clutch.
10 Gearbox with 540 rpm input and
1”3/8 Z6 (D3R-130-140) / 1”3/4 Z20 (D3R-150-180).
D3R
RV0
7St
anda
rd
01
06
05
03
06
05
02
02
04
03 1004
ROTARY BRUSH CUTTER
2726
TMC CANCELA FORESTRY PRICE LISTwww.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m
TMC CANCELA FORESTRY PRICE LIST
MOD. D5R-150 D5R-160 D5R-170 D5R-180 D5R-200
TECHNICAL FEATURES
Working width (m) 1,50 1,60 1,70 1,80 2,00
Total width (m) 1,62 1,72 1,82 1,92 2,12
Required input power (Hp) 85 90 110 120 140
Max. allowed power (Hp) 200 200 200 300 300
Gearbox input speed (rpm) 1.000 (540 optional)
Nr. of rotors 1
Nr. of chains 4
Coupling category Cat. 2
Skids Regulables en altura (3 positions) con sistema Widest
adjustable height control Skids
pTO shaft pTO shaft with clutch
fix model weight (kg) 840 930 1.064 1.106 1.152
Shifting model weight (kg) 1.080 1.115 1.150 1.224 1.396
Hydraulic cylinder stroke (mm) 400 500 500 500 500
Working reachmechanical (mm) 670-830 720-880 770-930 820-980 920-1.080
hydraulic (mm) 950-950 1.050-1.050 1.100-1.100 1.150-1.150 1.250-1.250
REF. FIX MODEL VM1C15 VM1C16 VM1C17 VM1C18 VM1C20
REF. SHIFTING MODEL VM2C15 VM2C16 VM2C17 VM2C18 VM2C20
OPTIONS
251 Rotor RV09 with pins
P01 Special body for narrow and crawler tractors
130 Gearbox with input to 540 rpm
01 Body with internal reinforcements.
02 Front and rear chain curtains for protection.
03 Adjustable in height rounded skids with Widest system.
04 Rear bent pins for guiding the brush when working backwards.
05 Three point linkage made of steel sheet with steel tube tensioners.
06 Hydraulic shifting three point linkage with nylon bushes for guiding
(shifting models).
07 Rotor with 2 cutting height levels.
08 Chains assembled to the rotor with connecting links.
09 PTO shaft with clutch.
10 Gearbox with 1.000 rpm input and 1”3/4 Z6.
D5R
0109
03
06
05
05
02
04
06
02
RV0
9O
ptio
n
04 10 RV09
RV0
7St
anda
rd
ROTARY BRUSH CUTTER
2928
TMC CANCELA FORESTRY PRICE LISTwww.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m
TMC CANCELA FORESTRY PRICE LIST
MOD. D5F-180 D5F-210
TECHNICAL FEATURES
Working width (m) 1,80 2,00
Total width (m) 1,95 2,15
Required input power (Hp) 130 160
Max. allowed power (Hp) 300
Gearbox input speed (rpm) 1.000
Nr. of rotors 1
Nr. of chains 4
Coupling category Cat. 2
Skidsadjustable in height
(3 positions)with Widest system
adjustable height control Skids
pTO shaft pTO shaft with clutch
Weight (kg) 1.506 1.884
Working reach mechanical (mm) 820-980 920-1.080
REF. MOD. VM3C18 VM3C21
OPTIONS
251 Rotor RV09 with pins
021 Hydraulic rear hood
022 Mechanical rear pushing frame
023 Hydraulic rear pushing frame with raker teeth
01 Body with internal reinforcements.
02 Front and rear chain curtains for protection.
03 Built-in body toolbox compartment.
04 Adjustable in height rounded skids with Widest system.
05 Three point linkage made of steel sheet with steel tube tensioners.
06 Rotor with 2 cutting height levels.
07 Chains assembled to the rotor with connecting links.
08 PTO shaft with clutch.
09 Gearbox with 1.000 rpm input and 1”3/4 Z6.
D5F
01
03
09
04
05
RV0
9O
ptio
n
0402 09 RV09
RV0
7St
anda
rd
ROTARY BRUSH CUTTER
3130
TMC CANCELA FORESTRY PRICE LISTwww.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m
TMC CANCELA FORESTRY PRICE LIST
MOD. R3-180 R3-190 R3-200
TECHNICAL FEATURES
Working width (m) 1,80 1,90 2,00
Total width (m) 1,92 2,02 2,12
Required input power (Hp) 70 80 90
Max. allowed power (Hp) 95
Gearbox input speed (rpm) 540
Nr. of rotors 2
Nr. of chains 8
Coupling category Cat. 2
Skidsadjustable in height (3 positions)
with Widest system
adjustable height control Skids
pTO shaft pTO shaft with clutch
fix model weight (kg) 912 936 1.096
Shifting model weight (kg) 982 1.110 1.188
Hydraulic cylinder stroke (mm) 500
Working reachmechanical (mm) 900-900 950-950 1.000-1.000
hydraulic (mm) 1.150-1.150 1.200-1.200 1.250-1.250
REF. FIX MODEL VM4C18 VM4C19 VM4C20
REF. SHIFTING MODEL VM5C18 VM5C19 VM5C20
OPTIONS
118 Hydraulic rear hood
019 Mechanical rear pushing frame
01 Body with internal reinforcements.
02 Front and rear chain curtains for protection.
03 Adjustable in height rounded skids with Widest system.
04 Three point linkage made of steel sheet with steel tube tensioners.
05 Hydraulic shifting three point linkage with nylon bushes for guiding
(shifting models).
06 2 rotors with 2 cutting height levels.
07 Chains assembled to the rotor with connecting links.
08 PTO shaft with clutch.
09 Gearbox with 540 rpm input and 1”3/4 Z6.
10 ZM patented system and rubber shock-absorbers between gearboxes.
R3
0105
03
02
02
04
RV0
7St
anda
rd
0302
ROTARY BRUSH CUTTER
3332
TMC CANCELA FORESTRY PRICE LISTwww.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m
TMC CANCELA FORESTRY PRICE LIST
MOD. R4-205 R4-220 R4-240
TECHNICAL FEATURES
Working width (m) 2,05 2,20 2,40
Total width (m) 2,17 2,32 2,52
Required input power (Hp) 85 110 120
Max. allowed power (Hp) 110 250 250
Gearbox input speed (rpm) 1.000 (540 optional)
Nr. of rotors 2
Nr. of chains 8
Coupling category Cat. 2
Skidsadjustable in height (3 positions)
with Widest system
adjustable height control lateral skids
pTO shaft pTO shaft with clutch
fix model weight (kg) 1.283 1.325 1.550
Shifting model weight (kg) 1.312 1.354 1.579
Hydraulic cylinder stroke (mm) 500
Working reachmechanical (mm) 1.025-1.025 1.100-1.100 1.200-1.200
hydraulic (mm) 1.275-1.275 1.350-1.350 1.450-1.450
REF. FIX MODEL VM6C02 VM6C22 VM6C24
REF. SHIFTING MODEL VM7C02 VM7C22 VM7C24
OPTIONS
251 Rotor RV09 with pins
117 Hydraulic rear hood
095 Mechanical rear pushing frame
01 Body with internal reinforcements.
02 Front and rear chain curtains for protection.
03 Adjustable in height rounded skids with Widest system.
04 Three point linkage made of steel sheet with steel tube tensioners.
05 Hydraulic shifting three point linkage with nylon bushes for guiding
(shifting models).
06 2 rotors with 2 cutting height levels.
07 Chains assembled to the rotor with connecting links.
08 PTO shaft with clutch.
09 Gearbox with 1.000 rpm input and 1”3/4 Z6.
10 Rubber shock-absorbers between gearboxes.
R4
01
04
03
02
02
RV0
9O
ptio
n
0302 09 RV09
RV0
7St
anda
rd
ROTARY BRUSH CUTTER
3534
TMC CANCELA FORESTRY PRICE LISTwww.tmccancela.com |+34 981 695 232
w w w. t m c c a n c e l a . c o m
TMC CANCELA FORESTRY PRICE LIST
MOD. R5-240 R5-270 R5-300 R5-320
TECHNICAL FEATURES
Working width (m) 2,40 2,70 3,00 3,20
Total width (m) 2,55 2,85 3,15 3,35
Required input power (Hp) 150 180 210 250
Max. allowed power (Hp) 300
Gearbox input speed (rpm) 1.000
Nr. of rotors 2
Nr. of chains 8
Coupling category Cat. 2
Skidsadjustable in height (3 positions)
with Widest system
adjustable height control Skids
pTO shaft pTO shaft with clutch
Weight (kg) 1.862 2.046 2.266 2.431
Working reach mechanical (mm) 1.200-1.200 1.350-1.350 1.500-1.500 1.600-1.600
REF. MOD. VM8C24 VM8C27 VM8C30 VM8C32
OPTIONS
251 Rotor RV09 with pins
096 Hydraulic rear hood
097 Mechanical rear pushing frame
098 Hydraulic rear pushing frame with raker teeth
01 Body with two levels and with internal reinforcements.
02 Front and rear chain curtains for protection.
03 Adjustable in height rounded skids with Widest system.
04 Toolbox compartment built-in body.
05 Three point linkage made of steel sheet.
06 2 rotors with 2 cutting height levels.
07 Chains assembled to the rotor with connecting links.
08 PTO shaft with clutch.
09 Gearbox with 1.000 rpm input and 1”3/4 Z6.
10 ZM patented system and rubber shock-absorbers between gearboxes.
R5
02
01
05
03
04
02
RV0
9O
ptio
n
02 RV09
RV0
7St
anda
rd
NeWMOdel
NeWMOdel
ANNEXES
www.tmccancela.com |+34 981 695 232 TMC CANCELA FORESTRY PRICE LIST
w w w. t m c c a n c e l a . c o m40 w w w. t m c c a n c e l a . c o m
HAMMERS
TFS • •TFS2 • •TFK • •TFX • •TFZ • • • • • • •TFT • • • • • • •TFR • • • • • •TFC • •
MODEL
F01 F03 F04 F05 F11F07 F12 F13
F05
2,2 kg
F13
2,2 kgF11
2,7 kg F12
2,7 kg
F01
1,7 kg F03
1,5 kg
F04
1,5 kg F07
2,4 kg
THREE POINT LINKAGE
Cat 1 2 3 4
Tractorhorse power …50 Hp …100 Hp …225 Hp …475 Hp
a 683 825 965 1.166,5
b 44,5 52 52 65
C 39 49 52 68
d1 22 28 36,6 50,8
d2 19 25,4 31,7 45
H 460 610 685 685
d2
B
H
d1
A C
1 3/4” – Z20
CLOCKWISE
D8x32x38
COUNTERCLOCKWISE
PTO (POWER TAKE OFF)
d1mm
d2mm
d3mm
d4mm
Rmm
dIN 9611* 35,6635,40
31,9031,75
34,8734,47
31,10 7,156,65
ISO 500 34,9634,93
31,9031,75
34,8734,85
31,1030,85
7,056,55
aSae S203 34,9634,92
31,8731,75
34,8734,85
30,68 7,116,61
d1mm
d2mm
T1mm
d3mm
d4mm
T2mm
Rmm
dIN 9611* 35,6735,40
31,9031,75
34,8734,47
31,10 7,156,65
ISO 500 34,9634,93
31,9031,75
34,8734,85
29,0028,90
8,648,51
7,056,55
aSae S203 34,9534,90
29,9729,72
8,768,69
34,8734,70
27,89 8,648,51
7,116,61
T2D
3
D4
T1
D1
D2
38±0,8
Ø29
,5Ø
29,3
R
60˚
6
D3
D4
D1
D2
25.5 ±0,8
Ø29
,5Ø
29,3
5R
60˚
1 3/8” – Z6
1 3/8” – Z21
1 3/4” – Z6
w w w. t m c c a n c e l a . c o m
TMC CANCELA FORESTRY PRICE LIST www.tmccancela.com |+34 981 695 232 TMC CANCELA FORESTRY PRICE LIST
MA
QU
INA
RIA
AG
RÍC
OLA
CA
NC
ELA
, S. L
. In
scri
ta e
n e
l Reg
istr
o M
erca
nti
l de
A C
oru
ña,
To
mo
177
4 d
el a
rch
ivo
, Sec
ció
n G
ral.,
Fo
lio 5
7, H
oja
nº.
C-1
5911
, In
scri
pci
ón
1ª
- C
. I. F
.: B
-155
4974
4
Pedra Salgueira, s/n | Anxeriz
15684 | Tordoia | A Coruña (SPAIN)
Tlf: +34 981 695 074
Fax: +34 981 695 232
www.tmccancela.com
ORDER FORM
DATE / / N.º
DISTRIBUTOR SIGNATURE AND STAMP (in accordance with the order) PAYMENT METHOD
COMPANY
ADDRESS
DELIVERY ADDRESS
NAME OF PURCHASER
PHONE NUMBER CELL PHONE
MACHINE REFERENCE
MACHINE DESCRIPTION
OPTIONAL 1 OPTIONAL 3
OPTIONAL 5 OPTIONAL 7
OPTIONAL 2
OPTIONAL 6
OPTIONAL 4
OPTIONAL 8
KIT KIT
OPTIONAL 1 OPTIONAL 3
OPTIONAL 5 OPTIONAL 7
OPTIONAL 2
OPTIONAL 6
OPTIONAL 4
OPTIONAL 8
KIT KIT
QUANTITY
REMARKS
DELIVERY DATE
DELIVERY DATE
MACHINE REFERENCE
MACHINE DESCRIPTION
QUANTITY
REMARKS
NOTES / COMMENTS
HOW TO PLACE AN ORDER
TMC CANCELA FORESTRY PRICE LIST
0TARIFA TMC CANCELA 2015www.tmccancela.com |+34 981 695 232www.tmccancela.com |+34 981 695 232
17
TMC CANCELA FORESTRY PRICE LIST
MOD. TFT-225 TFT-250
TECHNICAL FEATURES
Working width (m) 2,25 2,50
Total width (m) 2,85 3,10
Required input power (HP) 200 250
Max. allowed power (HP) 360 360
Rotor cutting diameter (mm) 632,5
Gearbox input speed (rpm) 1.000
Nr. of hammersF05 (Stump) / F11 (Heavy) 40 46
F13 (Stump) / F12 (Heavy) 2 2
Counterblades 1 fi xed row + 4 replaceable rows
Coupling category Cat. 3
Nr. of belts - type 12 - XPC
SkidsBolted adjustable
(2 positions)
PTO shaft Bondioli SH type
Weight (kg) 3.178 3.295
REF. MOD. HM0X03 HM0X25
58.050 € 60.050 €OPTIONS
122 Mechanical rear pushing frame 1.295 €123 Hydraulic rear pushing frame with raker teeth 2.800 €055 Kit turbo 19.513 €057 Skids for deeper work* 1.353 €243 Rotor Heavy (hammers F11 + F12) 0 €244 Rotor Super (hammers F03 + F04) 0 €245 Rotor Multi (hammers F01 + F04) 0 €
KM1.F05.0X Maintenance basic kit (2 hammers F05 + 4 bolts + grease) 278 €KM2.F05.0X Maintenance kit (basic kit + 12 belts XPC) 1.196 €KM1.F03.0X Maintenance basic kit (2 hammers F03 + 4 bolts + grease) 214 €KM2.F03.0X Maintenance kit (basic kit + 12 belts XPC) 1.132 €KM1.F11.0X Maintenance basic kit (2 hammers F11 + 4 bolts + grease) 247 €KM2.F11.0X Maintenance kit (basic kit + 12 belts XPC) 1.167 €
* This option excludes the Turbo Kit
MA
QU
INA
RIA
AG
RÍC
OLA
CA
NC
ELA
, S. L
. In
scri
ta e
n e
l Reg
istr
o M
erca
nti
l de
A C
oru
ña,
To
mo
177
4 d
el a
rch
ivo
, Sec
ció
n G
ral.,
Fo
lio 5
7, H
oja
nº.
C-1
5911
, In
scri
pci
ón
1ª
- C
. I. F
.: B
-155
4974
4
Pedra Salgueira, s/n | Anxeriz15684 | Tordoia | A Coruña (SPAIN)Tlf: +34 981 695 074Fax: +34 981 695 [email protected] www.tmccancela.com
ORDER FORMDATE / /
N.º
DISTRIBUTOR SIGNATURE AND STAMP (in accordance with the order)
PAYMENT METHOD
COMPANY
ADDRESS
DELIVERY ADDRESS
NAME OF PURCHASER
PHONE NUMBER
CELL PHONE
MACHINE REFERENCE
MACHINE DESCRIPTION
OPTIONAL 1
OPTIONAL 3OPTIONAL 5
OPTIONAL 7
OPTIONAL 2
OPTIONAL 6
OPTIONAL 4
OPTIONAL 8KIT
KIT
OPTIONAL 1
OPTIONAL 3OPTIONAL 5
OPTIONAL 7
OPTIONAL 2
OPTIONAL 6
OPTIONAL 4
OPTIONAL 8KIT
KIT
QUANTITY
REMARKS
DELIVERY DATE
DELIVERY DATE
MACHINE REFERENCE
MACHINE DESCRIPTION
QUANTITY
REMARKS
NOTES / COMMENTS
TFT-225
AGRÍCOLA PORRIÑOPONTEVEDRAO PORRIÑOJESÚS CAAMAÑO
608 112 457
H M 0 X 0 3 1 2 2
AGRICOLA PORRIÑO
C.I.F. B-15559634
O Porriño
Pontevedra
2
K M 1 F 0 5 0 X
8 1 2015
988 023 112
44
SPARE PARTS SERVICE
TMC CANCELA FORESTRY PRICE LIST
w w w. t m c c a n c e l a . c o mw w w. t m c c a n c e l a . c o m
Use always original partsQuality Assurance
46
www.tmccancela.com |+34 981 695 232 TMC CANCELA FORESTRY PRICE LIST
TERMS AND CONDITIONS
The information and photographic material contained in this document is indicative.It is not allowed to do any copies. TMC Cancela reserves the right of doing any changes, even substantial or
important ones, without notice.The usage of this price list is only reserved for the TMC Cancela authorized dealers and distributors.
TECHNICAL DATA
| The technical data in this document is only indicative. TMC CANCELA reserves the right to make any changes to the
products without notice.
EC DECLARATION OF CONFORMITY
| The TMC CANCELA equipment and machines are in accordance with the current Machinery Directive 2006/42/EC
(with application from 29/12/2009, replacing the old Directive 98/37/EC).
| Each machine is accompanied by the EC Declaration of Conformity, the Certificate of Manufacture and the User’s
Manual, being responsibility of the reseller agent the delivery to the end user.
NOTES / COMMENTS