Forensic Analysis of Glass HW: Ch 4 #1,2,4,6,11-15,24,26,27 Due 10/26.

Forensic Analysis of Glass

HW: Ch 4 #1,2,4,6,11-15,24,26,27 Due 10/26

Forensic Examination of Glass

• Goals in examining glass evidence:– Determine the types of glass at the scene– Determine how the glass was fractured– Use physical characteristics to classify it– Individualize the glass to a source

• Compare physical and chemical characteristics:– Optical properties: color and refractive index– Non-optical properties: surface wear, striations

from manufacturing, thickness, surface film or dirt, hardness, density

– Chemical properties: additives or trace elements

What is Glass?• “An inorganic product of fusion

which has cooled to a rigid condition without crystallizing”

• Uniform amorphous solid• No specific m.p.• Softens over a temperature range

What is Glass?

• Fusion of sand (SiO2), soda (Na2CO3) & lime (CaO) that produces a transparent solid when cooled.

• A 3D network of atoms which lacks the repeated, orderly arrangement typical of crystalline materials.

• Physical properties:

hard

elastic

brittle

non-conductor of electricity

density

refractive index• Chemical:

resistant to all but fluorine and very strong bases.

The primary uses for glass are in windows, containers, light bulbs and eyewear.

• Borosilicate Glass (pyrex): 5% borax (Na2B4O7) is added to resist breaking when heated or cooled.

• Colored Glass: metal oxides or colloidal iron (Fe) & sulfur (S) are added to change its color.

• Lead glass: Pb increases refractive index & density

What Types of Glass Are There?

What Types of Glass Are There?

• Flat glass: made by a “float glass process”; molten glass is floated on a pool of tin while cooling. Commonly found in doors and windows.

• Laminated glass: used in windshields, two sheets of glass with plastic between them.

• Tempered safety glass: used in car side windows and designed to break into tiny pieces; potassium (K) replaces sodium (Na) on the surface.

Rolled Glass Float Glass

Float Glass Process

• Each force causes a deformation that may leave a visible mark or fracture the glass. This can be used to determine the direction and amount of force.

• Glass acts initially as an elastic surface and bends away when a force is applied. When the force increases beyond its tensile strength, it cracks.

How Do Glass Windows Break?

• Radial cracks form first and are propagated in short segments on the side opposite the force.

• Concentric cracks come later from continued pressure on the same side as the force applied.

How Does Glass Break?

Which Bullet Hole Was First?

In the figure above, which impact occurred first?

• The sequence of impacts can be determined since crack propagation is stopped by earlier cracks.

How Does Glass Break?

• Edges of broken pieces of glass will show rib (“stress”) marks.

• In a radial crack, the rib marks are perpendicular to unloaded side and parallel to loaded side. The arrow shows the side that received the impact.

• 3R rule:– Radial cracks give rib marks that make– Right angles on the – Reverse side from where the force was

applied

3R Rule

–Radial cracks give rib marks that make–Right angles on the –Reverse side from where the force was applied

Which impact happened first?

• Explain why in your notes.

• HW: Notes on p125-139 due 10/29

Exceptions to the Three R Rule

Tempered glass“dices” without forming ridges

Very small windows held tightly in framecan’t bend or bulge appreciably

Windows broken by heat or explosionno “point of impact”curved, smooth edges at break points

Types of Fractures by Projectiles

• Bullets are a projectile force (load) that can pass through glass.– Load side is the entrance side; unloaded side is

the exit side.– Low-speed projectiles: rib marks may indicate

where breaking force was applied– As the bullet’s velocity increases, the central hole

becomes smaller, cracking patterns become simpler, and the exit hole becomes wider than the entrance hole.

constructed using polycarbonate, thermoplastic, and layers of laminated glass.

The aim is to make a material with the appearance and clarity of standard glass but with effective protection from small arms.

• usually made from a combination of two or more types of glass, one hard and one soft. The softer layer makes the glass more elastic, so it can flex instead of shatter.

• strong but optically transparent material that is particularly resistant to being penetrated when struck by bullets, but like all other known materials, is not completely impenetrable.

Fractures by Projectiles

•Stress lines on the glass edge of radial cracks form a right angle on the reverse side from the force.•Stress lines on the glass edge of concentric cracks form a right angle on the same side as the force.

Exit (unloaded) side is wider than entry (load) side.

Which side was the bullet fired from?

Putting it Back Together Again?

• Examiners can fit together two or more pieces of glass that were broken from the same object.

• Because glass is amorphous, no two glass objects will break the same way.

Learning Check

In the figure below & left, which impact occurred first?

Glass Transfer Evidence

• When glass objects are broken, glass flies backward from all parts of the object where cracks appear not just from point of impact.

• This creates a shower of minute glass particles and a transfer of evidence.

• Glass fragment comparison depends finding and measuring properties that will associate one glass fragment with another while eliminating other sources.

Collection of Glass Samples

• The glass fragments should be packaged in boxes to avoid further breakage.

• If evidence is to be examined for glass fragments, it should be taken whole and each item individually wrapped in paper and boxed.

• If even the remotest possibility exists that glass fragments may be pieced together, every effort must be made to collect all glass fragments.

• Submit glass evidence along with a representative sample of each type of glass from the crime scene.

Forensic Examination of Glass

• Goals in examining glass evidence:– Determine the types of glass at the scene– Determine how the glass was fractured– Use physical characteristics to classify it– Individualize the glass to a source

• Compare physical and chemical characteristics:– Optical properties: color and refractive index– Non-optical properties: surface wear, striations

from manufacturing, thickness, surface film or dirt, hardness, density

– Chemical properties: additives or trace elements

Optical Properties of Glass

Make side-by-side comparisons using similar-sized fragments.

Place samples on a white surface using natural light.

Use both fluorescent and incandescent light to determine the glass’s color.

Visual color analysis is very subjective.

Dyes and pigments can be almost impossible to extract.

Nonoptical Physical Properties of Glass

• Surface striations and markings– Rollers leave parallel ream marks on sheet glass– Markings may indicate the glass’s orientation

when pieces are missing– Surface scratches, etchings, and other markings

may also be used to individualize evidence

• Other Properties– Hardness=5-6 on Mohs scale; use a scratch test.– Determinations of curvature can distinguish flat

glass from container, decorative, or ophthalmic.

Forensic Analysis of Glass

Quantitative Properties of Glass

Why Measure Density?

• Can be used as a screening technique with large numbers of fragments.

• Useful in identifying multiple sources present in the known and/or questioned samples.

• It is nondestructive and an intensive property (not dependant on sample mass).

• Need to measure very precisely in parts per hundred or thousand or better.

Glass Density

• Density can be measured by: • directly determining mass and

volume (usually by displacement) • comparison by flotation• comparison using a density gradient

column

• Density gradient column method:• Fragments of different densities

settle at different levels in the column of liquid of varying density.

• Technique is not accurate for fragments that are cracked or contain an inclusion.

Density by the Flotation Method

• A glass particle is immersed in a liquid. The density of the liquid is adjusted by the addition of small amounts of another liquid until the glass chip remains suspended.

• At this point, the glass will have the same density as the liquid medium and can be compared to other relevant pieces of glass which will remain suspended, sink, or float.

Why Measure Refractive Index?

• Refractive index: ratio of the velocity of light in a vacuum to the velocity of light in any other medium

• For example, at 25oC the refractive index of water is 1.333. This means that light travels 1.333 times faster in a vacuum than it does in water.

• Like density, refractive index is an intensive property but it can be measured very precisely (±0.0002) and does not destroy the sample.

• Refractive index of glass varies with small changes in composition or by how it is manufactured.

Snell’s Law

N=1.52

The higher the n, the more the light bends

N=1.33

Refractive Index By Immersion

• Immersing a glass particle in a liquid medium (silicone oil) whose refractive index can varied with temperature until it is equal to that of the glass particle.

• At this point, known as the match point, the Becke line disappears and minimum contrast between liquid and particle is observed: RI oil = RI glass.

• The Becke line is a bright halo near the boarder of a particle that is immersed in a liquid of a different refractive index.

Refractive Index By Immersion

When 2 substances have different RI, light passing through them produces a Becke Line

A Becke line is a band or rim of light visible along a grain/crystal boundary in plane-polarized light.

Glass has higher refractive index-note white line inside

• Glass has lower refractive index-note white line outside

Becke Lines

Histogram = flat glassesCurve = container glasses

The measurement of RI alone can be of limited use because RI distributions of flat glasses and container glasses overlap.

Problems with Refractive Index

Manufacturing changed in late 1970’s making glass more uniform

1964-1979

1980-1997

A rough statistical estimate of the likelihood of finding glass of that refractive before 1970

Problems with Refractive Index

•The FBI has compiled density and refractive index data for glass from around the world.

•The FBI has identified a relationship between their refractive indices and densities for 1400 glass specimens that is better at classification.

FBI Refractive Index vs Density Data

Chemical Analysis of Glass

• Fluorescence– Under UV radiation, many glasses exhibit

fluorescence (glow)– Caused by heavy metals (including tin) from

“float” process or organic coatings

• Scanning Electron Microscopy Energy Dispersive X-ray Analysis– Can determine many elements simultaneously– Surfaces of samples (>50 mg) can be analyzed

• Atomic Absorption Spectroscopy– You must first know which elements are present– Can analyze ppm levels of elements present

Learning Check

1. Which unique chemical component would be found in each type of glass shown below?

(beaker) (windshield) (crystal)

2. Use “Table 2.3” to determine if lead borosilicate glass can be distinguished from borosilicate glass by density, refractive index, or both.

Quantitative Properties of Glass

The Wave of the Future: Laser Ablation

• Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS)– Laser burns off a microscopic sample– Elements are ionized by plasma– Detects 46 trace elements and their isotopes

simultaneously in glass at < 1 ppb

• LA-ICP-MS (Laser Ablation Inductively Coupled Plasma Mass Spectrometry) is a powerful analytical technology that enables highly sensitive elemental and isotopic analysis to be performed directly on solid samples.

• powerful analytical technology that enables highly sensitive elemental and isotopic analysis to be performed directly on solid samples.