PROCESS WEIGHING Applications • Inventory Measurement • Level Measurement • Batching/Blending • Filling/Dispensing/Dosing Features THE HARDY PROCESS TOOLBOX The Hardy Process Toolbox is a set of productivity tools that delivers value across process weighing functions. Each tool saves time, increases accuracy, improves efficiency or reduces risk in your process weighing applications. Electronic calibration without test weights Weighing system monitoring, diagnostics and troubleshooting IP66 Instrument Display Rating Nema 4X & Watershed Enclosure Options Turnkey, Pre-assembled www.hardysolutions.com • 800-821-5831 Integrated Panel Systems For the HI 4050, HI 6500 and HI 6600 Series IT INTEGRATED TECHNICIAN IT PRODUCTIVITY PROCESS TOOLBOX TM ® Optional Components Include: • 22mm metal pushbuttons and associated indelible marking. Available buttons are currently Blue (reset), Black (zero) and White (tare) and are located at the bottom half of the enclosure door • N-position selector switch and associated indelible marking to indicate modes of operation for Gross or Net located in the enclosure door • 3-mode tower light wired to the instrument located on the top of the enclosure • Opto22 relay backplane to accommodate a large variety of relay choices in AC, DC, low and high current, mechanical and solid state EASY INSTALLATION Just hang the Integrated Panel System on the wall, connect your load cells to the built in summing card through the cable glands and you are ready to calibrate! SIMPLE SET-UP & CALIBRATION The embedded webserver in the instrument enables access to setup and calibration from anywhere on your network. Use Hardy's exclusive C2® for automatic system calibration to save hours in commissioning and routine maintenance. QUICK MAINTENCE & DIAGNOSTICS Use INTEGRATED TECHNICIAN® to maintain and troubleshoot the weighing system from anywhere in the world or use Hardy’s intuitive local display. Save Time and Money with a type 4 or 4X Integrated Panel System REDUCE THE TIME TO DESIGN, DEVELOP AND DEPLOY Hardy Process Solutions provides Integrated Panel Systems for turnkey delivery of process weighing equipment in a variety of enclosures including stainless and powder-coated steel, in rectangular, watershed and hygienic designs. Integrated Panel Systems ease ordering and save time in configuration and installation, enabling Hardy customers to get up and running faster with just one supplier. Delivered ready to install, panels come in a type 4 or 4X rated enclosure with pre-wired instrumentation, accessories and peripherals, and pre-cut gland holes and a wireway for a complete, clean and organized weighing system. Integrated Panel Designs Include: • Installation of Hardy HI 4050, HI 6500, HI 6500-XP, or HI 6600 series instruments configured with any number of options, mounted on DIN Rail in a hinged type 4 or 4X enclosure with the associated pass through glands for power, communications, up to four sensors and up to three output cables. • Installation of an optional display panel mounted in the center of the upper half of the enclosure door allows an area for buttons and switches to be located in the lower half of the door. • Installation of an optional Hardy HI6020 IT summing card with connectors mounted in the back of the enclosure. • Nine standard enclosure options are available in a variety of materials, shapes and sizes, Other sizes and types are available by request.