Top Banner
FOR SALE new press KAHL for wood pellets production Output is 5 ton per hour Designed for the grinding of dry wood raw materials with humidity10-12% with following moistening, granulation and cooling of end product. Line is 100% ready for integration into a complete production cycle of wood pellets (required only a section of the grinding and drying) CAPEX savings for the construction of a pellet plant - The system cost is significantly lower than the new factory KAHL equipment German quality Location: Lithuania Delivery basis: EXW Kaunas, Lithuania
5

FOR SALE new press KAHL for wood pellets production Output is 5 ton per hour Designed for the grinding of dry wood raw materials with humidity10-12% with.

Dec 28, 2015

Download

Documents

Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: FOR SALE new press KAHL for wood pellets production Output is 5 ton per hour Designed for the grinding of dry wood raw materials with humidity10-12% with.

FOR SALEnew press KAHL for wood pellets production

Output is5 ton per hour

Designed for the grinding of dry wood raw materials with humidity10-12% with following moistening, granulation and cooling of end product.

Line is 100% ready for integration into a complete production cycle of wood pellets (required only a section of the grinding and drying)

CAPEX savings for the construction of a pellet plant - The system cost is significantly lower than the new factory KAHL equipment

German quality

Location: LithuaniaDelivery basis: EXW Kaunas, Lithuania

Page 2: FOR SALE new press KAHL for wood pellets production Output is 5 ton per hour Designed for the grinding of dry wood raw materials with humidity10-12% with.

The grinding and granulation line of dry raw materials consist of:

100% readiness for running into operation

• Hammer mill 660/1000 – 1 unit.• Automatic water metering system WD-GLI 15 – 1unit.• Mixing screw М 500 – 1unit.• Ripening hopper RWB 2205-1 – 1 unit.• Dosing and mixing screw DM 400 – 1 unit.• Auxiliary water metering system– 1 unit.• Pelleting press with flat die 60-1250 – 1 unit.• Electric hoist for dismantlement of die and chaser mills –

1 unit.• Counterflow granule cooler GK19x19 – 1 unit.• Vibrosieve for granules sifting – 1 unit.

Pellet plant structure

Page 3: FOR SALE new press KAHL for wood pellets production Output is 5 ton per hour Designed for the grinding of dry wood raw materials with humidity10-12% with.

Application example on Pellet-Energy plant in Ukraine

Equipment work around the clock

Hammer mill 660/1000

Pelleting press with flat die 60-1250

Ripening hopper RWB 2205-1

Counterflow granule cooler GK19x19

Page 4: FOR SALE new press KAHL for wood pellets production Output is 5 ton per hour Designed for the grinding of dry wood raw materials with humidity10-12% with.

Brief specifications and purpose of the equipment :

• Hammer mill 660/1000 – is designed for grinding of dry raw materials to the fraction less 4 mm, catching of metal inclusions.It’s completed by double screw feeder, mill power is 6 tones per hour. Installed capacity of driving gear is 160 kW. The number of hammers is 240 pieces. The number of sieves is 2 pieces.

• Automatic water metering system WD-GLI 15 – is designed for automatic metering installed amount of water by DCS operator (Digital Control System) into mixing screw before ripening hopper. The power is 25-315 liters per hour under pressure that makes up 3-10 bars.

• Mixing screw М 500 – is designed for prior moistening of the grinded dry raw materials before ripening hopper. The screw power is 6 tones per hours. Installed capacity of driving gear is 11 kW.

• Ripening hopper RWB 2205-1 – is designed for even mixing of moistened raw materials and giving them homogeneity by humidity. The volume of ripening hopper is 5, 5 m3. Installed capacity of driving gear is 9, 2 kW.

• Auxiliary water metering system (as required) is designed for moistening of the dry raw materials before loading into pelleting press in case of disrepair of basic moistening system..

• Dosing and mixing screw DM 400 – is designed for final moistening and feeding of grinded dry raw materials to pelleting press. The screw power is 6 tones per hour. Installed capacity of driving gear is 5, 5 kW.

• Pelleting press with flat die 60-1250 – is designed for forced compaction of grinded dry raw materials in canals of the die and forming of fuel granules according to the established quality. The power of pelleting press is 5 tones per hour. Installed capacity of driving gear is 400 kW.

• The number of chaser mills is 5 pieces. The oiling of pelleting press is carried out automatically.

• Electric hoist is designed for acceleration of dismantlement, adjusting and tuning operations of the die and chaser mills of pelleting press.

• Counterflow granule cooler GK19x19 – is designed for cooling, giving strength to granules, dust removal, further metered flow of granules to the vibrosieve.

• Vibrosieve for granules sifting – is designed for separation of fine particles and dust from fuel granules with further feeding of granules on transfer mechanisms.

Page 5: FOR SALE new press KAHL for wood pellets production Output is 5 ton per hour Designed for the grinding of dry wood raw materials with humidity10-12% with.

Alexander Pismenniy

Commercial director

[email protected]

Tel.: +38 097 043 55 80

Maria Kachula Sales and Purchasing

[email protected] Tel.: +38 095 139 49 62

Our contacts:

Reason for sale:

It was purchased of 3 new lines from Kahl , two of them are located in

Ukraine at the Pellet-Energy project, one line is stored at the moment in

Lithuania and has not been installed due to lack of resources in the project