Top Banner
Focusing Lighting Focusing Lighting Instruments Instruments THE107 THE107
18

Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

Jan 29, 2016

Download

Documents

Dominick Norton
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

Focusing Lighting Focusing Lighting InstrumentsInstruments

THE107THE107

Page 2: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

Focusing LightsFocusing Lights

This presentation will walk you through the This presentation will walk you through the basic steps of focusing a theatrical lighting basic steps of focusing a theatrical lighting instrumentinstrument

This demonstration will use a 36 degree This demonstration will use a 36 degree source four lekosource four leko

Later, we will cover the basic differences Later, we will cover the basic differences of other unitsof other units

Page 3: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

1. Get to the light1. Get to the light

Depending on where the light Depending on where the light is located, you may need a is located, you may need a ladder or personnel lift to ladder or personnel lift to access itaccess itMake sure you are secure at Make sure you are secure at all timesall timesDo not lean out – you can lose Do not lean out – you can lose your balance easilyyour balance easilyYou may need a spotter on the You may need a spotter on the ladder or liftladder or liftBe safe!Be safe!If you drop something, yell If you drop something, yell “HEADS!”“HEADS!”If you hear someone yell If you hear someone yell “HEADS!” don’t look up!“HEADS!” don’t look up!

Page 4: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

2. Observe the light2. Observe the light

Ensure that the light is rough focused in Ensure that the light is rough focused in the correct general directionthe correct general direction

Check safety chainCheck safety chain

Make sure shutters have been pulledMake sure shutters have been pulled

Check electrical connectionCheck electrical connection

Page 5: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

3. Turn light on3. Turn light on

Ask master Ask master electrician to turn electrician to turn light on when the light on when the designer is ready designer is ready to focus itto focus it

Page 6: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

4. Get beam in sharp focus4. Get beam in sharp focus

Push a side shutter in Push a side shutter in halfwayhalfway

Page 7: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

4. Get beam in sharp focus (cont.)4. Get beam in sharp focus (cont.)Unscrew barrel locking Unscrew barrel locking bolt and run barrel back bolt and run barrel back and forth until the edge of and forth until the edge of the shutter is sharp in the shutter is sharp in beambeamWhile holding barrel, While holding barrel, tighten bolttighten boltPull shutter back outPull shutter back out

Page 8: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

5. Adjust pan5. Adjust pan

Using pan Using pan bolt, focus bolt, focus light to light to designer’s designer’s directionsdirections

Page 9: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

6. Adjust tilt6. Adjust tilt

Using tilt handles, Using tilt handles, adjust focus to adjust focus to designer’s designer’s directionsdirectionsOften, a designer Often, a designer will stand in the will stand in the center of the area center of the area to be lit and ask to be lit and ask you to center the you to center the beam on the back beam on the back of their headof their head

Page 10: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

7. Make shutter cuts7. Make shutter cuts

Push shutters in Push shutters in according to according to designer’s directionsdesigner’s directions

Shutters are used to Shutters are used to crop “spill” light off of crop “spill” light off of unwanted areas or unwanted areas or objectsobjects

The left shutter crops The left shutter crops the right side of the the right side of the beam, and so on.beam, and so on.

Page 11: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

8. Adjust soft/hard edge8. Adjust soft/hard edge

The designer may ask The designer may ask you to “run the barrel” you to “run the barrel” which means to adjust which means to adjust the barrel locking bolt and the barrel locking bolt and slide the barrel in and out slide the barrel in and out all the wayall the way

This softens the beam This softens the beam edge slightlyedge slightly

Secure the barrel where Secure the barrel where the designer is pleased the designer is pleased with the beam edgewith the beam edge

Page 12: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

9. Drop color9. Drop color

Means to put Means to put color in color color in color slotslot

Do not actually Do not actually dropdrop

Page 13: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

10. Add pattern, if any10. Add pattern, if any

Patterns are held in Patterns are held in pattern holders and pattern holders and inserted in the pattern inserted in the pattern slotslot

Patterns are projected Patterns are projected upside downupside down

Page 14: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

13. Add pattern (cont.)13. Add pattern (cont.)

You may need You may need to adjust the to adjust the barrel based on barrel based on want the want the designer wants designer wants the pattern to the pattern to look likelook like

Page 15: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

14. Finish14. Finish

Make sure everything is tightMake sure everything is tight

Unit should not move if jostledUnit should not move if jostled

Inform master electrician that unit is Inform master electrician that unit is completecomplete

Page 16: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

Other units: FresnelsOther units: Fresnels

When focusing a When focusing a fresnel, remember fresnel, remember that you can adjust that you can adjust the beam from spot to the beam from spot to flood by sliding the flood by sliding the lever in the rear of the lever in the rear of the unitunitFresnels do not have Fresnels do not have shuttersshuttersFresnels cannot have Fresnels cannot have a hard edgea hard edge

Page 17: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

Other units: PARsOther units: PARs

PARs have removable PARs have removable lenses to adjust beam lenses to adjust beam widthwidth

Because the beam is Because the beam is oval shaped, the lens oval shaped, the lens may be rotated for a may be rotated for a different orientation at different orientation at the designer’s the designer’s discretiondiscretion

PARs have no shuttersPARs have no shutters

Page 18: Focusing Lighting Instruments THE107. Focusing Lights This presentation will walk you through the basic steps of focusing a theatrical lighting instrument.

Other units: Cyc LightsOther units: Cyc Lights

Cyc lights and other broad wash units Cyc lights and other broad wash units generally are only adjusted for tiltgenerally are only adjusted for tilt

They have no shuttersThey have no shutters

They have no hard edgeThey have no hard edge