Top Banner

of 19

FOAMGLAS .Cellular glass material has thermal movement characteristics similar to concrete and steel

Jun 28, 2018

ReportDownload

Documents

dinhkiet

  • www.foamglas.co.uk

    The Thermal Insulation System.

    Product Profile

  • 2FOAMGLAS Building, Product Profile

    1 Waterproof FOAMGLAS has an hermetical-

    ly sealed closed cell glass structure, therefore it

    is waterproof.

    Advantage: Does not absorb any moisture and

    does not swell.

    2 Vermin-proof FOAMGLAS is inorganic,

    therefore it cannot rot and it is vermin-proof.

    Advantage: No risk of rot in locations above or

    below ground. Resistance to nesting, breeding

    or seed germination.

    3 Compression-proof FOAMGLAS has high

    compressive strength. Due to its cell structure

    long-term compressive loads can be applied

    without movement or deformation. Advantage:

    A load-bearing thermal insulation, in locations

    where high compressive loads are present.

    4 Non-combustible FOAMGLAS consists of

    pure glass, therefore it is non-combustible to

    classification EN 13501: A1.

    Advantage: In a fire situation there is no pro-

    pagation of flames, no smoke or toxic gases.

    5 Vapour-tight FOAMGLAS has an hermetically

    sealed closed cell structure, therefore it is gas

    tight and water vapour-tight.

    Advantage: Vapour cannot permeate the

    sealed glass cell structure. FOAMGLAS provides

    a constant thermal insulation performance for

    the lifetime of the building. The potential pene-

    tration of radon gas is dramatically reduced.

    6 Dimensionally stable FOAMGLAS is di men -

    sionally stable because glass neither shrinks nor

    swells.

    Advantage: There cannot be any warping, buck-

    ling or creep. Cellular glass material has thermal

    movement characteristics similar to concrete and

    steel. The insulation is adhesive bonded to the

    structure.

    7 Acid-resistant FOAMGLAS consists of pure

    glass, therefore it is resistant to organic solvents

    and acids.

    Advantage: FOAMGLAS cannot be affected by

    aggressive mediums and atmospheres.

    8 Easy to work with FOAMGLAS consists of

    glass cells and is easy cut, trimmed and shaped.

    Advantage: At the construction site

    FOAMGLAS is easily be cut to size ensuring a

    close fit, which ensures continuity of the insula-

    tion.

    9 Ecological FOAMGLAS consists of recycled

    glass. Only renewable power is used in the

    manufacturing process.

    Advantage: After decades of use as thermal

    insulation FOAMGLAS can be ecologically recycled.

    1 3

    4 6

    97

    2

    5

    8

    Overview of Product Properties

    Additional Characteristics

    Composition Pure glass with a high percentage of recycled glass, inorganic, no added fire retardants or

    binding agents.

    Applicable limit temperatures From 265 C to +430 C

    Melting point (cf. DIN 4102-17) > 1000 C

    Water absorption 0

    Biological influences Resistant against microbes, rodents, insects and vermin.

    Water vapour diffusion resistance figure =

    Capillarity and hygroscopicity None

    Fire behaviour (EN 13501-1) A1

    Dimensional stability Does not swell, shrink, warp or creep

    Airborne sound reduction 28 dB at 100 mm thickness (in the mid frequency range)

  • Content

    3FOAMGLAS Building, Product Profile

    page

    FOAMGLAS Slabs / Tapered Slabs 4

    FOAMGLAS WALL BOARD 5

    FOAMGLAS READY BOARD 6

    FOAMGLAS FLOOR BOARD 7

    FOAMGLAS ROOF BOARD G2 8

    FOAMGLAS READY BLOCK / FOAMGLAS TAPERED READY BLOCK 9

    FOAMGLAS ROOF BLOCK G1 / FOAMGLAS TAPERED ROOF BLOCK G1 10

    FOAMGLAS PC PERISAVE 11

    FOAMGLAS PERINSUL HL 12

    FOAMGLAS Angle Fillet 12

    Primer and Sealing Compound 13

    Adhesives 14

    Adhesives and Coatings 15

    Rendering and Coatings 16

    Accessories 17

  • ** TolerancesaccordingtoEN13167.

    *** FormultiplelayeringFOAMGLAS contactinfo@foamglas.co.uk

    EN 13167

    Dimensions in mm thickness

    Length600mm,Width450mm**

    Density (10%)[kg/m3]

    Thermal conductivity D [W/(mK)]

    Fire behaviour (EN13501-1)

    Melting point (cf.DIN4102-17)

    Compressive strength CS externalsurveillance,

    (EN826,AnnexA)[kPa]

    Bending strength BS (EN12089)[kPa]

    Tensile strength TR (EN1607)[kPa]

    Thermal expansion coefficient [K-1]

    Specific heat [kJ/(kgK)]

    Thermal diffusivity at0C(m2 /s)

    Water vapour resistance

    (ENISO10456)

    Specific national product data

    Flexural modulus of elasticity E[MN/m2]

    BRE Green Guide Rating

    Application area

    FOAMGLAS T4+

    40200***

    115

    0.041

    A1

    >1000C

    600

    450

    100

    9 106

    1.0

    4.2107

    =

    (impervioustowatervapour)

    700

    A

    Universal,

    Flatroofs

    Internalfloors

    Internalwalls

    Faades

    FOAMGLAS S3

    40180***

    130

    0.045

    A1

    >1000C

    900

    500

    100

    9 106

    1.0

    4.1107

    =

    (impervioustowatervapour)

    1200

    A

    Universal,

    Flatroofs

    Internalfloors

    highercompressive

    strength

    FOAMGLAS F

    40160***

    165

    0.050

    A1

    >1000C

    1600

    550

    150

    9 106

    1.0

    3.5107

    =

    (impervioustowatervapour)

    1500

    B

    Universal,

    Flatroofs

    Internalfloors

    highestcompressive

    strength

    FOAMGLAS Slabs

    Product data

    FOAMGLAS Building, Product Profile

    FOAMGLAS Tapered Slab Insulation, T4+, S3, F

    Factory produced with a tapered thickness as below:% Slope: 0.55% 1.1% 1.25% 1.7% 2.2% 3.3% 4.4% 5.5% 6.7%Gradient: 1:180 1:90 1:80 1:60 1:45 1:30 1:22.5 1.18 1:15Angle: 0.32 0.64 0.72 0.96 1.27 1.91 2.55 3.18 3.81

    Applications: Tapered Slab Insulation for Roofs, Balconies, Terraces, Walkways and Floors, Vehicle Roadway & Parking.

    FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier.FOAMGLAS is easily cut or trimmed with a hand saw.

    Contact FOAMGLAS UK info@foamglas.co.uk,

    Tapered Insulation Design Service, further information regarding pricing.

    4

    FOAMGLAS W+F

    50160***

    100

    0.038

    A1

    >1000C

    400

    100

    9 106

    1.0

    4.4107

    =

    (impervioustowatervapour)

    A+

    Faade

    Externalwalls

    Internalwalls

    Cavitywalls

    Soffits

  • FOAMGLAS Building, Product Profile 5

    EN 13167

    Dimensions in mm thickness

    Length1200mm,Width600mm**

    Density (10%)[kg/m3]

    Thermal conductivity D [W/(mK)]

    Fire behaviour (EN13501-1)

    CorematerialEuro-standardA1

    Melting point (cf.DIN4102-17)

    Compressive strength CS externalsurveillance,

    (EN826,AnnexA)[kPa]

    Bending strength BS (EN12089)[kPa]

    Tensile strength TR (EN1607)[kPa]

    Thermal expansion coefficient [K-1]

    Specific heat [kJ/(kgK)]

    Thermal diffusivity at0C(m2 /s)

    Water vapour resistance

    (ENISO10456)

    Specific national product data

    Flexural modulus of elasticity E[MN/m2]

    BRE Green Guide Rating

    Application area

    FOAMGLAS Boards

    Product data

    FOAMGLAS

    WALL BOARD T4+

    40180***

    115

    0.041

    E

    B2

    600

    450

    100

    9106

    1.0

    4.2 107

    =

    (impervioustowatervapour)

    700

    A

    Internalwalls

    Externalwallsaboveand

    belowground

    Internalandexternal

    soffits

    ** TolerancesaccordingtoEN13167.

    *** FormultiplelayeringFOAMGLAS contactinfo@foamglas.co.uk

    FOAMGLAS

    WALL BOARD W+F

    40160***

    100

    0.038

    E

    B2

    400

    100

    9106

    1.0

    4.4 107

    =

    (impervioustowatervapour)

    A+

    Internalwalls

    Externalwallsaboveand

    belowground

    Internalandexternal

    soffits

  • FOAMGLAS

    READY BOARD S3

    40180***

    130

    0.045

    E

    B2

    900

    500

    100

    9 106

    1.0

    4.4x107

    =

    (impervioustowatervapour)

    1200

    A

    Metaldeckroofs

    Terracesandbalconies

    Exteriorbelowground

    walls

    FOAMGLAS Boards

    Product data

    FOAMGLAS

    READY BOARD F

    40160***

    165

    0.050

    EB2

    1600

    550

    150

    9 106

    1.0

    4.4x107

    =

    (impervioustowatervapour)

    1500

    B

    Metaldeckroofs

    Terracesandbalconies

    Exteriorbelowground

    walls

    EN 13167

    Dimensions in mm thickness

    Length1200mm,Width600mm**

    Density (10%)[kg/m3]

    Thermal conductivity D [W/(mK)]

    Fire behaviour (DIN4102-1),

    corematerialEuro-standardA1

    Compressive strength CS externalsurveillance,

    (EN826,AnnexA)[kPa]

    Bending strength BS (EN12089)[kPa]

    Tensile strength TR (EN1607)[kPa]

    Thermal expansion coefficient [K-1]

    Specific heat [kJ/(kgK)]

    Thermal diffusivity at0C(m2 /s)

    Water vapour resistance

    (ENISO10456)

    Specific national product data

    Flexural modulus of elasticity E[MN/m2]

    BRE Green Guide Rating

    Application area

    6FOAMGLAS Building, Product Profile

    ** TolerancesaccordingtoEN13167.

    *** FormultiplelayeringFOAMGLAS contactinfo@foamglas.co.uk

    FOAMGLAS

    READY BOARD T4+

    40180***

    115

    0.041

    E

    B2

    600

    450

    100

    9 106

    1.0

    4.2x107

    =

    (impervioustowatervapour)

    700

    A

    Metaldeckroofs

    Terracesandbalconies

    Exteriorbelowground

    walls

    Where two or more layers are required,

    use FOAMGLAS ROOF BOARD G2 as the b