FO-4BRI 4 ISDN BRI fiber optic Extension of 4 BRI from PBX or Network BRI set up as NT or TE Set up as T0 or S0 Operate also with an E1 fiber modem FO-E1T1 Fiber optic multimode or singlemode up to 117 km OTHER EQUIPMENT FOR BRI DISTRIBUTION MD444B 4 ISDN BRI G.SHDSL modem over 4 wire up to 8km CV24BR 4 ISDN BRI converter to E1 G703/G704 Interface converter to PDH/SDH or MW links Distribution of BRI over TDM Network DISTRIBUTION and EXTENSION of ISDN BRI CXR, offers a global portfolio if Telecom equipment including a range of ISDN Terminal Adapters and extenders over Fiber Optic link, copper cables and TDM multiplexers. The FO-4BRI is a fiber optic modem, this is carrying 4 independent BRI with 2B and 1D channels. This modem is available as multi-mode or single-mode fiber with a complete choice of distances. The FO-4BRI is supporting the point to point connection (T0) or bus connection (S0). In the pair of modem one equipment must be set as TE in order to be connected to the Network or the PBX while at the other end the other modem is set as NT to connect to the ISDN terminal. The FO-4BRI-C is supporting the power feeding of the BRI to use a ISDN phone without power. This Modem is intended to: Extend in the customer premise the BRI line through an industrial campus from the Public termination with a full immunity to electric noise Interconnect 2 PBX in a campus or over several stairs in a large building despite to the electric/elevator/air conditioning installation Extend the BRI line in large infrastructure campus to connect PBX/phone set/Visio up to 60 km This fiber optic modem is a secure communication link to transport voice communication for military, airport between central site and isolated users. FO-4BRI ISDN BRI to BRI modem over fiber optic ISDN extension over fiber optic The FO-4BRI can work together with a E1 converter CV24BR or SHDSL extender MD444B if they are connected through E1 interface over an E1 network.
2
Embed
FO-4BRI ISDN extension over fiber optic (En) · the ISDN terminal. The FO-4BRI-C is supporting the power feeding of the BRI to use a ISDN phone without power. This Modem is intended
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
FO-4BRI
4 ISDN BRI fiber optic
Extension of 4 BRI from PBX or Network
BRI set up as NT or TE
Set up as T0 or S0
Operate also with an E1 fiber modem FO-E1T1
Fiber optic multimode or singlemode up to 117 km
OTHER EQUIPMENT FOR BRI DISTRIBUTION
MD444B
4 ISDN BRI G.SHDSL modem over 4 wire up to 8km
CV24BR
4 ISDN BRI converter to E1 G703/G704
Interface converter to PDH/SDH or MW links
Distribution of BRI over TDM Network
DISTRIBUTION and EXTENSION of ISDN BRI
CXR, offers a global portfolio if Telecom equipment including a range of ISDN
Terminal Adapters and extenders over Fiber Optic link, copper cables and TDM
multiplexers.
The FO-4BRI is a fiber optic modem, this is carrying 4 independent BRI with
2B and 1D channels. This modem is available as multi-mode or single-mode
fiber with a complete choice of distances.
The FO-4BRI is supporting the point to point connection (T0) or bus connection (S0). In
the pair of modem one equipment must be set as TE in order to be connected to the
Network or the PBX while at the other end the other modem is set as NT to connect to
the ISDN terminal.
The FO-4BRI-C is supporting the
power feeding of the BRI to use
a ISDN phone without power.
This Modem is intended to:
Extend in the customer premise the BRI line through an industrial campus
from the Public termination with a full immunity to electric noise
Interconnect 2 PBX in a campus or over several stairs in a large building
despite to the electric/elevator/air conditioning installation
Extend the BRI line in large infrastructure campus to connect PBX/phone
set/Visio up to 60 km
This fiber optic modem is a secure communication link to transport voice
communication for military, airport between central site and isolated users.
FO-4BRI ISDN BRI to BRI modem over fiber optic
ISDN extension over f iber opt ic
The FO-4BRI can work together
with a E1 converter CV24BR or
SHDSL extender MD444B if
they are connected through E1
interface over an E1 network.
2
The information contained in this document are provided without warranty and do not constitute a contractual document.
In order to improve its products, CXR reserves its right to modify without notice any part of this document.
SPECIFICATIONS
Fiber Optic Line
ST or SC connectors
Type of multi-mode fiber (NM) with diameter 62,5/125µm or single-mode (SM) 9/125 µm
ISDN extension over f iber opt ic
MXCFG
Graphical management
software
ISDN
• 4 Basic Access Rate BRI interfaces 2B+D
• Line 4W
• Use to carry a Bus S0 or a point to point T0
• One device of the pair must be set up as NT (network) and the other as TE (terminal)
• In version DC FO-4BRI-xxxC only , one BRI is power source to power feed an ISDN telephone set
Presentation
• Desktop in metal box, all connections on front except power
• Rack card for AMS4/AMS16, uses 2 slots
Management
• Local console, RS232 port
• Intuitive menus and Windows GUI—MXCFG
• Management card in the AMS16 chassis : SNMP
• V54 loop test : B2, B3 loop
Signalling : standalone or rack card
• LED : Power, DTE, SYNC, ERR, DATA and test
• Push button CLR to delete the ERR mode
General Characteristics of desktop
• Dimensions : 287 x 175 x 41 mm
• Power supply : version AC : 110—230 Vac version DC : 48 Vdc (40 - 68 Vdc)