LED FEELUX Lighting, Inc. 3000 Northwoods Parkway #115 Norcross, GA 30071 U.S.A. Phone: (678) 668 7005 1 of 3 01/15 All Rights Reserved. 2015 - Feelux Lighting, Inc. NORTH AMERICA PRODUCT FEATURES • Seamless Illumination • UltraS • Even Illumination on Surface • Spot Free Lens Options • • End to End Connection • Bracket or Magnetic Mounting • Dimmable with Accessories • Beam Angle: 120º / Round & Square Lens - 220º • Finish: Natural Aluminum ( Standard) • Warranty: 5 year Warranty • • Voltage: 24VDC Constant Voltage Feelux or Approved Driver • Operating Temperature: 32-113ºF (0-45ºC) • Lamp Life: 40,000 hrs / 70% • Available Color: 2700K, 3000K, 3500K, 4000K, 6000K • Color Rendering: Ra > 80 • • IP20 Damp Location/Closet Approved SPECIFICATION DIAGRAM PRODUCT SPECIFICATIONS HDV FLX Stix HDV™ Series High Output SPECIFICATION GUIDE ALL PARTS NEEDEDFOR INSTALLATION WILLBE INCLUDED. FOR ADDITIONAL COMPONENTS ORDERSEPARATELY ON PAGE 2 DimmingInterface 0-10V Option1: Cord & Plug /Feelux Driver s Option 2 : Hardwire /Feelux Driver Option 3: 3rd Party Drivers Driver Options Controls Opti ons Fixture Options FLC (15, 30 or 75) 24V/XL Dimming Options: Fixture Length Fixture Length Direct Connection Plugs End-to-En d 8 ft Power Cord XLD75-124V-F C Fixture Length Flat Frosted Lens Options: Round or Square HDVPC Can power 75 W MAXFixture Load TOTAL CONNECTED LOAD SHOULD NOT EXCEED DR IVER WATTS! Continous Line of Light requires Side Feed Unit Every 12’ (75W) 3rd party drivers are available to 600W. Please consult factory. NOTE: Options 2 & 3 require low voltage wi re to be provided by EC. Flexible Connecto r XXXPTCX 6”,12”,24”,48” or 7 " Non-Dimming Options: 6 Port HUB OR 24VDC IN 6 Port HUB FDC-L10 = Spli ce point - Polarity must be followed Feelux Drivers require Dimming Interface FDC-L10 + + Inline Dimmer Connect To First Fixture 0-10V Control + + OR 6 Port HUB 8 ft Power Cord Splice + + Forward Phase Dimming 8 ft Power Cord Splice + 8 ft Power Cord Direct Connect to Fixture Flexible Connector Cable OR NDVDIM *DRAWINGS & RUN LENGTH REQUIRED Spot Free LED R r MODEL HDV DRIVER COLOR 100V 120V 230V 277V LENS ST -Flat Frosted RM -Round Milky SM -Square Milky CONTROLS NDM Non-Dim IDM Inline Dim FDC 0-10V Interface FPH Forward Phase S -Straight V -Varies* HDV CONFIGURATION RUN LENGTH ft. CP - Cable/Plug HW - Hard Wire TD - 3rd Party Drivers Consult Factory 27K -2700 K 30K -3000 K 35K -3500 K 40K -4000 K 60K -6000 K RUN LENGTH IN FEET Fill out for every run section VOLTAGE MOUNTING STD - Flat Brackets Magnets Included BK2 - 15º/40º Brackets
3
Embed
FLX Stix HDV™ Series High OutputNORTH AMERICA ... Stix_HDV...HDV FLX Stix HDV Series High Output SPECIFICATION GUIDE ALL PARTSNEEDED FOR INSTALLATION WILL BE INCLUDED. FOR ADDITIONAL
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
PRODUCT FEATURES• Seamless Illumination• Ultra S• Even Illumination on Surface• Spot Free Lens Options • • End to End Connection• Bracket or Magnetic Mounting• Dimmable with Accessories
• Beam Angle: 120º / Round & Square Lens - 220º
• Finish: Natural Aluminum (Standard)• Warranty: 5 year Warranty•
• Voltage: 24VDC Constant Voltage Feelux or Approved Driver• Operating Temperature: 32-113ºF (0-45ºC)• Lamp Life: 40,000 hrs / 70%• Available Color: 2700K, 3000K, 3500K, 4000K, 6000K• Color Rendering: Ra > 80• • IP20 Damp Location/Closet Approved
SPECIFICATION DIAGRAM
PRODUCT SPECIFICATIONS
HDV
FLX Stix HDV™ Series High Output
SPECIFICATION GUIDE ALL PARTS NEEDED FOR INSTALLATION WILL BE INCLUDED. FOR ADDITIONAL COMPONENTS ORDER SEPARATELY ON PAGE 2
Dimming Interface 0-10V
Option1:Cord & Plug /Feelux Drivers
Option 2:Hardwire / Feelux Driver
Option 3: 3rd Party Drivers
Driver Options Controls Options Fixture Options
FLC (15, 30 or 75) 24V/XL Dimming Options:
Fixture Length Fixture Length
Direct ConnectionPlugs End-to-End
8 ft Power Cord
XLD75-124V-FC
Fixture Length
Flat Frosted Lens Options: Round or Square
HDVPC Can power 75W MAX Fixture Load
TOTAL CONNECTED LOAD SHOULD NOT EXCEED DRIVER WATTS!
Continous Line of Light requires Side Feed Unit Every 12’ (75W)
3rd party drivers are available to 600W. Please consult factory.
NOTE: Options 2 & 3 require low voltage wire to be provided by EC.
Flexible ConnectorXXXPTCX
6”,12”,24”,48” or 72"
Non-Dimming Options:
6 Port HUB
OR
24VDC IN
6 Port HUB
FDC-L10
= Splice point - Polarity must be followed
Feelux Drivers require Dimming Interface FDC-L10
+
+
Inline Dimmer
Connect To First Fixture
0-10V Control
+
+
OR6 Port HUB
8 ft Power CordSplice
+
+
Forward Phase Dimming
8 ft Power Cord
Splice
+
8 ft Power Cord Direct Connect to Fixture
Flexible Connector Cable
ORNDVDIM
*DRAWINGS & RUN LENGTH REQUIRED
Spot Free LED
R r
MODEL
HDV
DRIVERCOLOR
100V120V230V277V
LENS
ST -Flat FrostedRM -Round MilkySM -Square Milky
CONTROLS
NDMNon-DimIDM Inline Dim FDC0-10V Interface FPH Forward Phase
S -StraightV -Varies*
HDV
CONFIGURATION RUN LENGTH
ft.
CP -Cable/PlugHW -Hard Wire TD -3rd Party Drivers Consult Factory