Fluidized Deposition Reactor for Silicon Production

Fluidized Deposition Reactor for Silicon Production

Paul Ege1, Alireza Abbasi1, Jin-Seok Seo2, Jun-Suk Lee2, Jung-Hyun Lee2 1- Reactech Process Development Inc, Canada 2- KCC Corporation, Republic of Korea

2  

Overview

•  Siemens Rod Deposition •  High Energy / High Quality •  SiHCl3(g) +H2 = HCl(g) + Si(s) •  SiH4 = Si(g)+Si(s)+ H2

•  Metallurgical Routes •  Low Energy / Low Quality

•  Fluid Bed deposition •  Low Energy / Medium-High Quality •  SiH4 = Si(g)+Si(s)+ H2 •  SiHCl3(g) +H2 = HCl(g) + Si(s) •  4 SiHCl3= 2 H2+ 3 SiCl4+ Si(s)

•  Silane Freespace •  Low Energy / Medium quality

3  

Background Polysilicon Processes

3  

Background Fluidization Fundamentals

4  

Background Fluidized bed design elements

5  

Polysilicon Fluidized Bed Process Evaluation

ª  Continuous granular production => Reduce operation cost

ª  Excellent contact high surface volume => compact process

ª  Low DP for high throughput => high capacity

ª  Excellent heat transfer => low energy consumption

ª  Near isothermal conditions and large

thermal reservoir

6  

-  Complex flow patterns -  Gas mix in emulsion -  Gas bypass in bubbles

-  Attrition and Erosion -  Quality reduction -  Dust generation -  Pipe/Internal deterioration

-  Entrainment -  Powder inherent, less with TCS -  Dust from abrasion/attrition

-  Fouling -  Wall -  Nozzles/distributor

-  Complex reaction kinetics -  TCS, equilibrium limited -  Silane, competing reactions

Advantages Challenges

6  

Ø  JPL work in 1980ʼ’s many references Ø  Furusawa Hom/Het kinetics (1988) Ø  Lai & Dudukovics (MEMC) 1986

•  Describes a multi step mechanism

Ø  Caussat et. Al. study on FBR (1995-98) •  Bubbling reactor model and exp data

Ø  Mlezcko et. Al. Solarworld (2004) Ø  Pina et.al REC process (2006)

•  PF/CSTR approach

Ø  Ydstie-Balaji independent(2009)

Ø  Parker Barracuda (2010)

Polysilicon Fluidized Bed Literature

7  

Polysilicon Fluidized Bed Prior art (old patents)

8  

Polysilicon Fluidized Bed Protected designs (current patents)

9  

MEMC – SiH4 FBR •  Two stage process; high production with dust, low

production to adsorb dust and anneal •  Seed, quench, el.mag. heat, coating and valves •  Recent – multiple beds for growth, and special distributor •  Appears to be traditional bubbling fluid bed behavior •  Dimensions and capacities not revealed

REC – SiH4 FBR •  Submerged Spouted bed one or more spouts •  Nozzle design with secondary orifice, internal grinding,

annular withdrawal, halogen injection, tapered bed •  Recent radiant heated bed with internal liner and cooling

below injector

Others in development •  Wacker, KRICT, AEP, SILIKEN – TCS based •  Samsung-MEMC, KCC – Silane based •  Independent developers

Polysilicon Fluidized Bed Commercial Processes

10  

Polysilicon Fluidized Bed Commercial design solutions

11  

①  Review stage ü  Review literature/patents for IP/Cost/Risk feasibility analysis

②  Lab/Bench Scale (inches diameter) ü  Establish reaction kinetics and flow for basic reactor models ü  Validate process conditions and scale up strategy for pilot/commercial

③  Pilot/Demo Scale (feet diameter) ü  Validate commercial challenges in long term continuous operation ü  Verify scale up predictions and design for commercial ü  Well instrumented small commercial unit with many interruptions ü  Risk in scale best taken here!

④  Commercial Scale (meters diameter) ü  Target uninterrupted production with minimum disturbance ü  Start-up and stabilize, then optimize Yield/Capacity/Quality/Economics

FBR development Scope Scale and Objective of stages

12  

FBR development Multi Stage Effort

13  

FBR development Multi Level Modeling

14  

Reactech  Process  Development    

FBR development CFD and CPFD for flow and scale up analysis

15  

FBR development Reactor Model for design/analysis/control

16  

Characteristics

OBJECTIVE  Experimental  methods  to  verify  a  wide  range  of  parameters  that  are  important    

in  reactor  model  development  and  for  design  purposes  

Particle– External •  Fluidization/Entrainment/Reactivity •  Porosity/Density, Size/Shape, Umf, DPf, Ut Gas •  Fluidization/Entrainment •  Density, Viscosity Fluid bed •  Void, Solid Mixing, Gas dispersion, Mass and

Heat transfer Entrainment •  TDH, Freeboard flow/void, Cyclone feed/

efficiency, Dipleg operation

Pressure and Temperature •  Global / Time average => Mb, Hb, Void fraction •  Fluctuations => frequency, regime, forces •  Correlations => size, velocity •  Delta T=> Solids mixing Intrusive probes •  Capacitance/Fiberoptic/DP •  Local bubble and void properties Non Intrusive probes •  x-ray, γ-ray, capacitance •  High speed samples => local bubble properties •  Multiple samples => Tomography Tracer studies •  Gas dispersion •  Solids mixing (solid tracer, heat pulse)

FBR development Experimental

Methods

17  

Ø  Polysilicon FBR is promising technology for low cost high quality production

Ø  Prior art allows development of Polysilicon FBR. Challenge will be to avoid design details already patented

Ø  Significant development challenges require serious long-term effort from lab through pilot to commercial scale.

Ø  REC successfully commercialized new technology

Ø  Several new projects at different development stages

Ø  KCC progressing well with solid foundation from Bench scale efforts fast approaching demonstration scale pilot production

Conclusions

18