7/29/2019 Flue & chimney systems
1/16
F
Natural Ven
K
Heat Pum
Solar
7/29/2019 Flue & chimney systems
2/16
AN INTRODUCTION TOAIRTHERMWHOWE AREHVAC specialists with a varied product range including -
. Flues & Chimneys Systems
. Natural Ventilation & Lighting Systems
. Kitchen Ventilation Systems
WHYCHOOSE US54 years combined HVAC Expe
We only use the highest qualit
Experienced installation teamWe demand the highest qualit
Manage projects closely
Strict adherence to regulation
Strengthen our business by cu
Competitive compared to othe
7/29/2019 Flue & chimney systems
3/16
FLUE PORTFOLIODWTWIN WALL MODULAR CHIMNEYFEATURES:
Specially Designed for Condensing Applications
Thermal Expansion Absorbed in each Element (no need for expansion bellows)
No Thermal Bridge (insulation continuity throughout the system)
High Mechanical Resistance to Vertical and Horizontal Forces
40mm Overlap
Diameters available from 80mm to 1000mm
10 year guarantee
APPLICATIONS:
Domestic Heating and Hot water systems
Industrial or Commercial Heating
Bakery Ovens
Open Fire Places
Hot Air Generators
Ventilation and Smoke Extraction
7/29/2019 Flue & chimney systems
4/16
FLUE PORTFOLIODWTWIN WALL MODULAR CHIMNEY
MATERIALS:
Inner Wall:
AISI 316L (1.4404) or AISI 304L (1.4301)
Outer Wall:
AISI 304L (1.4404) or AISI 304L (1.4301)
Aluzinc - only for inside installation
Copper
Painted (RAL range)
Insulation:
Rockwool (30mm to 50mm depending on
the diameter)
FUEL:
Gas, Diesel, Wood, Coal
WORKING TEMPERATURE:
6000C Under Continuous Fire
OVER PRESSURE:
200 Pa (with joint)
7/29/2019 Flue & chimney systems
5/16
FLUE PORTFOLIOGE FLUE SYSTEMFOR GENERATORS AND TURBINES
FEATURES:
HETAS Approved
Manufactured in accordance with BS ISO 9001:2008 Quality Management Standard
CE marked to EN 1856-1
Designed to Work in High Temperatures (upto 600C) and High Pressures (upto 5000 Pa)
Insulated Double-Walled Modular Metallic Chimney
Insulation thickness (kg/m3) according to appliance temp & outer touch requirements
Individual Expansion Absorption at Joints (no need for expansion bellows)
Gas & water tightness
High velocities ranging from 25 m/s to 40 m/s
Protection Panels to Prevent Damage from Abrupt Motor Stops or Explosions
Primary Silencer to Reduce Noise
10 year guarantee
7/29/2019 Flue & chimney systems
6/16
FLUE PORTFOLIOGETWIN WALL MODULAR CHIMNEYFOR GENERATORS AND TURBINES
MATERIALS:
Inner Wall:
AISI 304 (1.4301) - for Natural Gas, LPGs and Diesel Oil
AISI 316 (1.4404) - for Natural Gas, LPGs, Diesel Oil and Biodiesel
Outer Wall:
AISI 430 (1.4016) - Indoor installation in clean environment
AISI 304 (1.4301) - Indoor installation in uncontaminated
environment
- Outdoor installation in area away from the coast
AISI 316 (1.4404) - Outdoor installation in costal or industrial area
- Indoor or aggressive environment installation
Insulation:
100 kg/m3 density Rockwool
Joint Insulation:
Biosoluble ceramic fibre with density 220 kg/m3
and 96 kg/m
Sealing Ring:
Stainless steel AISI 304 (1.4301)
External finish
Mirror finish (BA). Optional power coated accordingRAL / BS range
7/29/2019 Flue & chimney systems
7/16
FLUE PORTFOLIOFKSINGLE WALL MODULAR CHIMNEYFEATURES:
HETAS Approved
Manufactured in accordance with ISO 9001:2008
CE marked to EN 1856-2
Suitable for chimney liners and low temperature condensing flues
Cost-effective solution.
P1 Tightness (max 200 PA) with no joints
Quick and easy assembly
Diameters available from 80mm to 1000mm
10 year guarantee
APPLICATIONS:
For gas, oil, and/or solid fuels
With Negative (N) or Positive (P) pressure
In Dry (D) or Condensing (W) mode
Ideal for re-lining: no need for replacement of deteriorated old joints
7/29/2019 Flue & chimney systems
8/16
FLUE PORTFOLIOFKSINGLE WALL MODULAR CHIMNEY
MATERIALS:
AISI 316L (1.4404) or AISI 304L (1.4301)
THICKNESS:
From (diameter) 80mm to 300mm : 0.4mm
From (diameter) 350mm to 600mm : 0.5mm
From (diameter) 650mm : 0.6mm
FUEL:
Gas, Oil
Solid Fuels
WORKING TEMPERATURE:
250 c: EN 1856-1: CHIMNEYS
600 c: EN 1856-2: LINERS
7/29/2019 Flue & chimney systems
9/16
FLUE PORTFOLIODinagas SHARED SYSTEM CHIMNEY FOR MULTIPLE BOFEATURES:
Manufactured in accordance with ISO 9001:2008
CE marked to EN 1856-1
Suitable for multi chimney low temperature condensing flues
Working temperature 1600C (max)
Quick and easy assembly
Connecting flue available from 60/100mm & 80/125mm
Chimney flue available from 150mm dia to 350mm dia
Chimney sizing calculated according to BS EN 13384-2
APPLICATIONS:
For natural gas appliances and fulfils criteria of BS 5440-1:2008
With Negative (N) pressure
Total heat output upto 560kw max per common chimney with a 350mm i/dia (675o/d) flue
Ideal for domestic and light commercial wall hung boilers
7/29/2019 Flue & chimney systems
10/16
DESIGN & INSTALLATION
SITE SURVEY
Liaise with client
CAD design proposals
Information required to carry out a
flue/chimney design Appliances(es)
make & model, horizontal and ve rtical
runs, adjacent building(s), windows,
intakes, AHU, position of termination
SIZE CALCULATIONS
FlueCalc specialist software available
Adhere to current regulations
Fluecalc calculates chimney size based
on plant application , flue gas volume,
overpressure available, loss/friction for
bends tees, cowls & temperature release
from the boiler
AIRTHERM QUOTATIONS
Quotations provided and adhered to
Return tender on time
Correct product selection
System allowances
Competitive by selecting the correct
products & allowing sufficient labour
Exclusions & Inclusions
Terms & Conditions
INSTAL
Experienc
Strict safe
Meet all c
employee
Height Aw
Accredita
Construct
awaiting a
7/29/2019 Flue & chimney systems
11/16
CHIMNEY & FLUE REGULATIONSBRITISH STANDARDS
The products we use are approved and CE marked to EN 1856-1 and manufactured under a quality
assurance scheme (certificate number issued upon request), administered by British Standards in
accordance with BS EN 9001: 2008.
Our manufacture and installation is in accordance with local and national building regulations
together with:
BS: 5440 -1:2008 Domestic natural gas appliances international codes
BS EN 15287: 2007 for masonry chimneys and flue pipes
BS 6644:2011 Specification for the installation and maintenance of gas-fired hot water boilers
of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases)
IGE/UP/10 Installation of flued gas appliances in industrial and commercial premises.
Clean Air Act Memorandum
Chimneys to BS 4076 and corresponding
Technical Guidance Note (Dispersion) D1, Guidelines on Discharge Stack Heights for Polluting
Emissions
2010 Edition of the Approved Document J
Provisions of DEFRA - Local Air Quality Management (LAQM)
7/29/2019 Flue & chimney systems
12/16
FLUE CALC
CASCADE CALC
BOILER CALC
Our FlueCalc software accurately calculates chimney size based on a number of factors we
take into consideration. These include (but are not exclusive of) plant application, flue gas
volume, overpressure available, loss/friction for bends and tees, cowls and temperature
release from the boiler. With this information we can determine the best chimney size for your
application.
7/29/2019 Flue & chimney systems
13/16
CASE STUDIES
DINAK TWIN WALL FLUECAMDEN ACADEMY 500mm diameter stainless steel, fully
welded gas and water tight Dinak DWhp
flue system
Serves three high efficiency Clyde Unical
Modulex condensing boilers (2.2MW
output)
12m horizontal and 26m vertical run
with drains for condense evacuation
Worked closely with BAM Construction
AIRTHERM MASTERFLUEST BERNARDS RC SCHOOL Modumax HE Variheat PV105 system
200 Pa working pressure (product will
operate 1000pa max)
Dry/Wet operation and Positive/
Negative pressure
Gas/Oil/Coal/Wood fuel
Education Sector
NOVA TWIN WALL FLUEST GREGORYS RC SCHOOL Serves two high efficiency, wall hung
Mikrofil Ethos 90kw condensing boilers
4 hour fire rating BS476 part 20
Suitable for solid fuel & fully condensing
systems
Twin wall stainless steel flue system
Dinak DSWAN LA Cost-effic
tender succ
original Ham
2.5m hori
Consulted
and the clie
Education
7/29/2019 Flue & chimney systems
14/16
CASE STUDIES
DINAWORT 3nr 35
mast
Conde
Stainle
Four H
Each c
runs
AIRTHERM MASTERFLUEADDENSBROOKE HOUSE The flue system is serving four new high
efficiency condensing boilers, and
comprises of a twin wall stainless steelinner & outer casing with 25mm insulation.
The flue system has a 3.5m horizontal run
and a 2.5m vertical, incorporating the
necessary drains to allow any unwanted
condense to evacuate the system
BS & Clean Air Act Memorandum
DINAK DW FLUE PRODUCTOAKHAM PRIMARY SCHOOL Airtherm have recently designed, supplied
and installed a complete twin wall stainless
steel flue system serving each MHS AdinoxADI LT 200 modulating boiler
The existing cast iron boilers were
removed by the contractor during the
School summer shut-down, working on a
tight program the high efficiency boilers
were installed followed by the installation
of our flue system
AIRTHERM MASTERFLUELONDON OFFICES 450dia flues serving two Hoval SR boilers
Stainless Steel inner & Outer Casing
Four Hour Fire Rating
30mm Insulation
Each comprises of 27m stack & 10m
horizontal runs
Location - Telford, Shropshire
7/29/2019 Flue & chimney systems
15/16
CASE STUDIES
CANVENT SYSTEMELMHURST SCHOOLLiaised with both the consultant and the
contractor at all times
Induction Island Canopy
Ansul R-102 Fire Suppression System
Fully recessed grease-proof lights
Medem Control Interlock System
KITCHEN VENTILATIONHALLSVILLE PRIMARY SCHOOLOur track record of successful and
efficient projects was demonstrated by
the recent installation of our 'Canvent'Island kitchen canopy system for London
Borough of Newham
The 4100 x 2200 x 600 deep island
kitchen canopy was fitted with grease
proof recessed lights, stainless steel
grease filters, and a R102 Ansul fire
suppression system
CANVENT SYSTEMTIVIDALE SCHOOL Working closely with Sandwell MBC, we
recently completed the installation of a
kitchen ventilation system, complete withcontrol solution that features a thyristor,
speed regulators and gas interlock
The existing canopy was removed, and a
stainless steel wall mounted extraction
canopy was designed and installed in it's
place, with a provision for make-up air
KITCHEDGBA Airther
complete
multiple well-know
Birmingh
The ma
3.0m, co
lights an
with a slo
glass con
7/29/2019 Flue & chimney systems
16/16
OFFICE: 0844 809 2509
FAX: 01562 887312
EMAIL: [email protected]
WEBSITE: www.airtherm.co.uk