8/10/2019 Floor Trunking works
1/36
Cableduct Limitedthe complete cable management system
30 Selhurst Road, South Norwood,
London SE25 5QF
Fax: +44 (0)20 8689 7896
Telephone: +44 (0)20 8683 1126
www.cableduct.ltd.uk
8/10/2019 Floor Trunking works
2/36
Cableduct Limited
the complete cable management system
8/10/2019 Floor Trunking works
3/36
tel: 020 8683 1126 fax: 020 8689 7896
www.cableduct.ltd.uk
We at Cableduct are
continuously improving
our product range.
Please visit our website at:
8/10/2019 Floor Trunking works
4/36
Cableduct has provided
products to prestigious
sites throughout London,
across Britain and
around the world.
30, St Mary
Axe
Victoria & Albert
Museum
Selfridges, Birmingham
(also London & Manchester)
Lahore Airport, Pakistan
Harrods
Somerset House
University
CollegeLondon
Capital City Academy
Royal Albert Hall
Greenwich Maritime Museum
Please call us
to discuss your
requirements
Telephone: 020 8683 1126
Fax: 020 8689 7896
www.cableduct.ltd.uk
8/10/2019 Floor Trunking works
5/36
www.cabl educt.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 1
2-3
BESPOKE SERVICE
4-9
SERVICE BOXES
10-12
FLUSH FLOOR SCREED
TRUNKING
13
CAVITY FLOOR
TRUNKING
14-15
UNDERFLOOR
IN-SCREED TRUNKING
16-19
SURFACE TRUNKING
20-21
LIGHTING TRUNKING
22-25
SKIRTING &
DADO TRUNKING
26
BENCH TRUNKING
27
PEDESTAL BOXES
28-29
SERVICE POLES
30-31
CABLE TRAYS32
CAPACITY GUIDE
Cableduct Limited
Quality Choice Service Value
8/10/2019 Floor Trunking works
6/36
Cableduct Limited - the complete cable management system2
Stainless Steel round
grommet box
Tall dado section for aninstallation requiring
large data capacity
When is non-standard notnon-standard?
When its made by Cableduct.
We can make products to your exactrequirements, without the heavy cost
penalties normally associated withnon-standard products.
Half of what we do is Bespoke.
Choice
Much of our bespoke work is the provision of existing
products and features, tailored to specific requirements.
Cableduct has the benefit of over 40 years experience inthis market, and can draw on this to find a solution to
any problem.
Value
Cableduct has honed its manufacturing capability to
provide flexible manufacturing cells with fast response
times to the toughest of problems.
This is how we make our standard and our non-standard
orders run smoothly side-by-side.
Our aim is simple - the lowest prices without
compromise.
3 compartment trunking
with screw fixed, hingedlid designed for use in the
London Underground
Profiled dado section to any dimension
Bespoke Products
8/10/2019 Floor Trunking works
7/36
An unbeatable service - weprovide what you want, whenyou want it, at realistic prices.
Quality
We never compromise. All our products are rigorously
tested and only the best materials used.
Service Immediate response to your technical enquiries by our
dedicated team of engineers, helping design solutions to
your cable management problems.
Here are just a few examples of the products we have
manufactured for customers specific requirements as
one-offs or large batches.
www.cabl educt.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 3
Adjustable stainless steel
trunking units specially designed
for a lighting project in a
restricted area
Service outlet box provided
with black plates and trim to
match a clients required
colour scheme
Tamper-proof
outlet box
designed for use
in a public area
500 Series with
stainless steel flat lid
Pedestal unit designed to
customers requirements
Round brass
grommet with
carpet infill
All of our service boxes can beoffered in a variety of finishes.
A Unique Service
8/10/2019 Floor Trunking works
8/36
Service Boxes - Outlet Plates
Cableduct Limited - the complete cable management system4
Ref 54 Plate fitted with 1x2
Gang switched socket outlet
Ref 55 Plate fitted with 1x2
Gang unswitched socket outletRef 01 Blank Plate
Ref 73 Plate fitted with 1x1
Gang unswitched socket outlet
and 1x1 Gang non-standardunswitched socket outlet
Ref 74 Plate fitted with 1x1
Gang switched socket outlet
and 1x1 Gang non-standardswitched socket outlet
Ref 91 To accept 4 x RJ45
outlets** (also available with 2outlets Ref 56 or with 6 outlets
Ref 91S)
Ref 88* Plate fitted with 1x2
Gang and 1x1 Gang switched
socket outlet. (Ref 89 1x1Gang switched non-standard
socket)
Ref 90* Plate fitted with 1x2
Gang unswitched socket and
1x1 Gang non-standardunswitched socket
Ref 58* To accept 2x1 Gang
standard outlets
ALL PLATES ARE FULLY INTERCHANGEABLE
SPECIAL PLATES CAN BE MADE TO ORDER
Outlet plates for service box 500 series and 700 series prefix with the number 5
(i.e. Ref 554 is for service box plate fitted with 1 x 2 Gang switched socket outlet).
Outlet plates for service box Ref 600 series prefix with number 6.
Many other plates are available from stock, including ones with non-standard sockets, please enquire.
Plates can be supplied dished if a greater plug top space is required.
*Plate Ref 58, 88 & 90 are not available for Ref 600 series service outlet box.
**Standard cutout sizes Modsnap (36.4mm x 22.4mm) or Euromod (47.5mm x 23.5mm) Others to order.
8/10/2019 Floor Trunking works
9/36
700 Series Service Box Designed for any infill of any
thickness, such as marble,wood, granite, tile or carpet.
Available in brass or stainlesssteel with matching outletflap.
Suitable for use with orwithout trim.
Range of sizes for 1, 2, 3 or4 compartment.
Available with flat stainlesssteel lid.
Can be modified to any sizeusing our bespoke service.
700 Series Round Service Box Designed for any infill up to
25mm, such as marble,wood, granite, tile or carpet.
Available in brass or stainlesssteel with matching roundedoutlet flap.
Range of sizes for 1, 2 or 3compartment.
600 Series Service Box Designed for carpet infills. Made from strong ABS fire
retardant materials and steelbox.
Complete with trim. Range of depths.
500 Series Service Box Designed for carpet, tile or
vinyl infill. Carpet trim available if
required. Made from steel and
aluminium. Range of sizes for 1, 2, 3 or
4 compartment. Can be modified to be any
size using our bespoke
service. Available with flat stainless
steel lid.
Service Boxes - Overview
www.cabl educt.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 5
700 Series Service Box
open, with trim, in wooden floor closed, no trim, in granite floor
hinged open, in marble floor closed, in granite floor
open, carpet finish closed, carpet finish
4 compartment, open, carpet finish 4 compartment, closed, carpet finish
600 Series Service Box
500 Series Service Box
700 Series Service Box Round
8/10/2019 Floor Trunking works
10/36
The robust service box easily
modified to fit any size requirements.
THE ADVANTAGES:
Cableduct 500 series service boxes
are manufactured from 18 swg
galvanised sheet steel, with anextruded aluminium inner frame
and zinc die-cast corners, fitted with
zinc plated levelling feet.
This flexible design feature enablesit to be easily modified to any size
to accept special equipment.
The height adjustable inner frame
allows for levelling the box with thefloor finish level.
Carpet trim available in brass or
stainless steel, or other special
requirements. Solid steel recessed lid with 2.5mm
galvanised steel infill. Lid recess
6.5mm.
Available with stainless steel flat lid. All outlet plates are interchangeable.
Floor Box Available plug
Depth top space55mm 20.2mm
65mm 27.2mm
85mm 27.2mm
STOCK SIZES*
Reference Comp. Depth Floor Cut Out516 Single 85mm 140 x 245mm
518 Single 65mm 140 x 245mm
526 Two 85mm 223 x 245mm
528 Two 65mm 223 x 245mm
504 Three 55mm 315 x 245mm
506 Three 85mm 315 x 245mm
508 Three 65mm 315 x 245mm
546 Four 85mm 400 x 245mm548 Four 65mm 400 x 245mm
*Note that all these are standard base boxes, and are
available with conduit or underfloor connections. Any
other size is available to order.
Service Boxes - 500 Series
Cableduct Limited - the complete cable management system6
Service Box Ref 508
20mm and
25mm knockouts
432
Service Box Ref 546
Ref 508 with stainless
steel flat lid
Interchangeable outlet plates
Service Box Ref 546, lid open Service Box Ref 546, lid closed
39
5
280
240
85
Galvanised steel
outer case
Height adjustable
aluminium inner
frame
Steel lid
8/10/2019 Floor Trunking works
11/36
262
218
The ideal solution for modern office
environments.
THE ADVANTAGES:
600 Series three compartment floor
box for use with both cavity and
screed trunking systems has beenspecially designed with a carpet
trim to blend into the surrounding
floor.
The tray lid is strengthened using3.0mm galvanised steel.
A simple rectangular recessed tray
accepts floor infill providing easy
on-site fitting, lid recess 11mm (canbe reduced by packing).
Lid can be hinged at either end, and
is also easily removable to provide
full access when wiring. All plastic compartments are
manufactured from strong ABS fire
retardant materials.
All outlet plates areinterchangeable.
Available in standard depths of
either 95mm (Ref 600/95), 75mm
(Ref 600/75) or 65mm (Ref 600/65)or other depths to order.
Floor Box Available plug
Depth top space65mm 26mm
75mm 26mm
95mm 36mm
Service Boxes - 600 Series
Service box ref 600/95 lid open
Service box ref 600/95 lid closed
Outlet Flaps
Lid
Trim Rail
Guide Trim Rail
Service Box Frame
Interchangeable
Outlet Plates
Service Box Outer Case
available depths
65, 75 and 95mm
ex stock (otherdepths to order)
Floor Tile Cut-out
www.cabl educt.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 7
8/10/2019 Floor Trunking works
12/36
Service Boxes - 700 Series 700 Series Round
Outlet Flap
Lid
Frame (no trim)
InterchangeableOutlet Plates
Height AdjustableService BoxFrame
Service BoxOuter Case
A round floor service outlet box that can accept an infill
of ANY thickness, be it stone, marble, timber, ceramic or
carpet infill.
ADVANTAGES:
Round service box, 190mm diameter with rounded cable
outlet grommet and square base box to enable easyconnection to services.
Available in stainless steel or brass, with co-ordinated
solid cast outlet flap.
Lid recess made to suit floor thickness up to 25mm thick.Please specify recess required when ordering.
Available as either 1, 2 or 3 compartments (see page 9
for sizes). Referenced 7R0**, eg 7R026 for 2
compartment, 65mm deep. Available as either 65mm or 85mm deep as stock. Other
sizes available to order.
Base box with conduit or trunking connections.
A height adjustable inner frame to ensure perfectlevelling when installed.
To suit any combination of standard service box plates.
700 Series round floor box installedin a ceramic floor tile finish
Rounded solid cast outletflap, open
700 Series roundfloor box in granitefloor
Cableduct Limited - the complete cable management system8
8/10/2019 Floor Trunking works
13/36
A floor service outlet box that
uniquely can accept an infill of ANY
thickness, be it stone, marble, timber,ceramic or carpet infill.
THE ADVANTAGES:
Used in offices, department stores,shops and areas with prestigious
floor finishes.
Available with either brass or
stainless steel lid and protectivetrap, with matching solid cast outlet
flap. Specify brass or stainless steel
on ordering.
Lid recess made to suit floorthicknesses up to 30mm thick.
Please specify recess required when
ordering.
Can be supplied with a trim.Standard assumed without trim
unless a trim is specified.
A range of sizes for 1, 2, 3 or 4
compartments. Available depths 65mm or 85mm as
standard. Other sizes to order.
Base box with conduit or trunking
connections (20 and 25mmknockouts supplied as standard).
Height adjustable inner frame to
ensure perfect levelling with the
floor finish level.To suit any combination
of Cableducts standard
interchangeable service
box plates. Plug top space 28.5mm
as standard. Others
available to order to any
depth.
Service Boxes - 700 Series
Comp. Depth* Floor cut-out*Ref 716 Single 65mm 265 x 155mm
Ref 726 Two 65mm 245 x 265mm
Ref 736 Three 65mm 330 x 265mm
Ref 746 Four 65mm 420 x 265mm
Ref 718 Single 85mm 265 x 155mm
Ref 728 Two 85mm 245 x 265mm
Ref 738 Three 85mm 330 x 265mmRef 748 Four 85mm 420 x 265mm
*Note that all these are standard base boxes, and are
available with conduit or underfloor connections. Other
sizes are available to special order.
LIDRECESS
28.5mmplug
topspace
BASEBOXDEPTH
Reinforcement
Height adjustableinner frame
Supplied with 20 and25mm knockouts asstandard
Outlet plate
Stainless steel or Brasslid and trap
Floortile
Floortile
Reference 736 brass with trim
Reference 736 stainless steel floor box installed in granite floor area
Solid cast outlet flap, open
Solid cast outlet flap, closed
Ref 718 Floor Boxwith flat stainless
steel lid
www.cabl educt.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 9
8/10/2019 Floor Trunking works
14/36
SPECIFICATION:
Cableduct Flush Floor Trunking is manufactured in 1.5mm (16 swg) for the
body and in 2.5mm (12 swg) for the lid, both from hot dipped pre-galvanisedsteel sheet.
Trunking bodies are supplied in 2 metre lengths; lids and removable channel
dividers in 500mm lengths (where applicable).
It is advisable that all lid sections should be in place prior to screeding.
This prevents the pressure of the screed distorting the trunking sides.
All trunking lengths come complete with the necessary lid fixings and
body connectors.
TO ORDERDelivery of FF4, FF12, FF13 and FF16 are usually
ex-stock. FF2 and FF4 supplied with fixed channel
dividers. All other ranges have removable channel
dividers to allow service boxes to be placed atany point along the trunking run.
Note: all sections are available with gaskets as
illustrated on ref FF4 / 40. Gasket not suppliedunless ordered separately.
Any configuration is available to order.
Any profile can be made with recessed tray lid.Recess to be specified at time of order.
Any profile available with non-standard or
unequal compartments.
Any profile can be made in any size.
We can adapt both trunking and service boxes to
suit your existing installed trunking.
Flush Floor Screed Trunking
Cableduct Limited - the complete cable management system10
FF 12
FF 14
FF 15
FF 16
FF 2
FF 4/25
FF 4/40 with Gasket and
channel gasket(Ref 164 and 165)
Body connector (Ref 150) -
one pair supplied free of
charge with each length of
trunking
40
25
44
65
65
65
55
6
6
153
300
440
330
330
110
110 110
110
110 110 110
10
110 110
110 110
11080
FF 1365
330
110 110 110
Ref 136 Lid fixing clamp plate -
1 pair supplied per lid
8/10/2019 Floor Trunking works
15/36
THE ADVANTAGES:
The flexibility of fitting new outlet
points, and moving existing ones,without having to disturb the
screed.
Designed for use with a screeded
floor, with the lid flush with thefinished floor level.
Upper surface is in the form of a
removable cover: either flat, or
recessed to take a floor covering orinfill.
Trunking available in a variety of
standard depths from 25mm to
65mm to suit screed thickness. Floor service outlet boxes may be
fitted at any point along the trunking
run at any time after screeding,
when using trunking at least 55mmdeep.
A 2, 3 or 4 compartment system
designed to accommodate all
power, telephone, data and otherancillary system service cables.
Can be interconnected with
Cableduct skirting trunking using
vertical riser bends.
New lids and service boxes can be
made to suit any existing trunking,
provided it is at least 55mm deep.Please call for further details.
Flush Floor Screed Trunking
FF 16 Flush floor trunking
fitted with ref.
FF16/600 service box
Flat ribbon of screed to be
laid prior to installation oftrunking
Concrete Slab
Screed
www.cableduct.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 11
8/10/2019 Floor Trunking works
16/36
Flush Floor Screed Trunking
Service Box Fitting Sequence
1. Remove Lid2. Remove standard segregation channel (500mm)
3. Fit service box segregation channel into trunking
4. Fit Lid with cut out onto trunking
5. Fit socket plates onto Lid6. Fit service box frame into Lid
Steel flush floor trunking
(Ref 130) complete with
fitted service boxes and
500mm lids (Ref 110) -FF 16 illustrated
Levelling Bracket
Floor boxes are mounted within
a 500mm long steel lid section
which simply replaces astandard lid and therefore can
be placed anywhere in the
trunking system
Tray lid to accept carpet ortile can be fitted on
junctions. Stainless steel
available to order.
Ref 131
Angle bend (500mm long)
Ref 133
Cross complete with flyover(500mm long)
Ref 600Service Box shown in
exploded view
Service Box
Segregation Channel
Accessories available
Ref 130 2m length body
Ref 131 Angle bend
Ref 132 TeeRef 133 Cross
Ref 134 Vertical bend
Ref 136 Lid fixing clamp
Ref 138 End cap
Ref 151 Levelling Brackets
Cableduct Limited - the complete cable management system12
8/10/2019 Floor Trunking works
17/36
The convenient solution for
raised floors
THE ADVANTAGES:
Installed within the raised floor to
service a distribution of 3 or 4
compartment flush fitting floorservice outlet boxes.
Supplied with 3 x 20mm conduit
knock-outs at one metre centres
along trunking sides and dividers forflexible conduit connections
between the trunking and service
outlet boxes.
Flyovers or tap-off boxes could also
be used with the trunking for
distribution and segregation ofcables between different services.
Additional service outlet boxes can
be easily installed or existing boxes
moved at any time withoutdisrupting the system.
A rectangular hole is cut out in a
floor panel into which the service
box is inserted to rest on the returnflange, which is then secured with
countersunk screws to the panel.
Knockouts are provided in the
service box outer case against each
compartment to connect a flexibleconduit to the service trunking.
Wide range of accessories available
as illustrated in our Surface Trunking
Type C on pages 16-19.
Cavity Floor Trunking
www.cableduct.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 13
Accessories available:
Top gusset bend Ref C21
Top Square bend Ref C34
End Cap Ref C38(for all other accessoriessee surface trunking pages
16-19)
Ref CF1/20
Ref CF3/20 (3 comp)
also available CF4/20
(4 comp)
Ref CF2/20
C24 Top Gusset Tee
(C32 Square Tee)
CF500 Conduit
Tap Off Box
Ref C127 Top Gusset Cross
shown with lid removed
(Ref CF133 Square Cross)
500 Service Box
CF140
Ref 600 Service Box
Connected to
CF3/20 using flyoverchannels Ref CF140
150
50
50
50
225
225
8/10/2019 Floor Trunking works
18/36
Underfloor In-Screed Trunking
Cableduct Limited - the complete cable management system14
Accessories Ref No
Junction Box Cross U/94
Junction Box Tee U/95
Junction Box Angle U/96Junction Box Through U/97
Junction Box Conduit U/98
Junction Box Terminal U/99
End cap U/38Copper Earth U/41
Body connector U/56, U/58Door threshold (base entry) U/106
Door threshold (back entry) U/107
Ref U3/90
Ref U2/90
Ref U/41
Copper Earth Strap
Ref U/58Joint Cover Sleeve
Floor Junction Box complete with
Flyover set U/100 (not shown).
4 way cross Ref U/94 illustrated,
carpet recess.
Ref U/56
Body
Connection Fish
Plate
Ref U/53
Body ClampingBracket
Ref U/52
Body Clamping
Plate
Ref U/92
Vertical Bend
Ref U/93Horizontal Bend
225
150
25
25
8/10/2019 Floor Trunking works
19/36
Underfloor In-Screed Trunking
www.cableduct.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 15
The versatile and unobtrusive way to
provide services to island sites.
THE ADVANTAGES:
Provides electrical, telephone data
and other services to island sites in
offices, hotels, shops andshowrooms.
The trunking is designed to be
buried in the floor screed with
services brought out through serviceoutlet boxes flush with the floor
surface or floor mounted
pedestal boxes.
Can be interconnected withCableduct Skirting Trunking.
Service outlet boxes are provided
with adjustment screws to reduce
on-site installation time bycounteracting the level variations
inherent in large screeded floor
areas.
SPECIFICATION
Cableduct Underfloor Trunking is
manufactured in 1.2mm galvanised
sheet steel to BS 4678 Part 2 1973 andsupplied in 2 metre lengths.
Trunking with two and three screened
compartments allows medium and
low voltage circuits to be separated inaccordance with IEE Regulations.
Standard Junction boxes are supplied
with a height adjustable 6mm deeprecessed trap and frame to accept a
carpet infill which may be reversed to
provide a plain surface flush with the
screed.
Junction boxes can be provided in a
brass or stainless steel finish, with
solid corner blocks to any lid recess,designed to co-ordinate with our 700series service box, see page 9.
Cableduct Underfloor Trunking,
requires a minimum screed depth ofonly 50mm. Minimum depth for
service boxes is 55mm, please see
500 series Ref 504.
Stainless Steel Service box Ref 726/ST-ST with under
floor connections, lid recess made to order. Shown
with trimless stainless steel frame.
Floor junction box with stainless steel lid and corner blocksto suit 20mm granite tile infill. Any recess available to order.
Shown with stainless steel frame with trim.
8/10/2019 Floor Trunking works
20/36
Surface Trunking
Cableduct Limited - the complete cable management system16
The robust and easy-to-install
enclosure for electrical and other
services.
THE ADVANTAGES:
A range of standard sizes from
50 x 50mm to 150 x 150mm, areavailable for ex-stock delivery.
Other sizes are available to order.
Available in either 2 metre or 3
metre lengths complete with oneconnecting sleeve.
Rapid and easy installation, as the
quick release lid runs the full length
of the trunking. Wide range of accessories and
fittings eliminates on-site fabrication
and minimises installation time.
Optional features includeWeatherproof trunking - Type E Part
Depth Partitions {Suffix Y/ number
of compartments}and Full Depth
Partitions {Suffix X/ number ofcompartments}.
Supplied standard in a galvanised
finish or white. Other finishes are
available to order.
SPECIFICATION
Cableduct Surface Trunking is
manufactured to BS4678 Part 1 Class3 from galvanised steel.
Both the body and the lids are press
brake formed to close tolerance foreasy assembly and to eliminate
distortion when cut on-site.
Note: Dimensions x by y asindicated on component C20 should
be specified when ordering.
RefC390
Standard Connecting Sleeve
(1 pair supplied free of charge with
each length of trunking)
RefC20L trunking lid
with metal turnbuckle
fixing
RefC35250mm Long Sleeve
RefC20
TrunkingBody
RefC37
Flanges
RefC42
Termination
Flanged End
RefC38
End Cap
RefC20 Type E
(weatherproof)
REFC20/Y/2
(multi-compartment)
y
x
8/10/2019 Floor Trunking works
21/36
Surface Trunking
www.cableduct.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 17
RefC44
45 TopLid Bend
Ref C52Tapered Reducer
REFC28
Flange Tee
RefC27
Gusset Cross
RefC21
Top Lid Gusset Bend
Ref C24Top Lid Gusset Tee
RefC56 Turnbuckle Rod
RefC36
Fitting Coupling
RefC62
Spring Type
Cable Retainer
RefC49
Sleeve with
Bushed Fixings
RefC39
Full Connecting Sleeve
RefC37
FlangesRefC40
Cable Retainer
Ref C41
Copper Earth Link
Zinc Plated
RefC42
Terminating
Flange End
RefC38
End Cap
RefC35 250mm
Long Connecting Sleeve
for 3 metre Unsupported
Spans RefC63 Cable Separator
with Plastic Covered
Steel Pins
RefC51 Cable Grips with
Plastic Covered Pins
RefC54 Brass Turnbuckle
8/10/2019 Floor Trunking works
22/36
Surface Trunking
Cableduct Limited - the complete cable management system18
RefC67Internal Angle
RefC65Front Entry Tee
Ref C51Cable Grip with SteelPlastic Covered Pins
Ref C62Spring TypeCableRetainer
RefC48Internal Angle
Ref C46External Bend 45
Ref C60GussetInternal Bend
RefC25Front and RearEntry Tee
RefC22Internal GussetOpen Corner Bend
RefC63Cable Separatorwith Plastic CoveredSteel Pins
RefC4545 Internal Bend
RefC23External GussetOpen CornerBend
RefC61Gusset External Bend
RefC36Fitting Coupling
Ref C68Left Hand
Change or Plane Angle
Ref C34Top Right AngleLeft Hand
Ref C33Top Tee
Ref C32
Top Right AngleRight Hand
RefC41CopperEarth Link
RefC47External Angle
RefC67Internal Angle
RefC31Back Entry Tee
RefC57Fire Barrier Unit
8/10/2019 Floor Trunking works
23/36
Surface Trunking
www.cableduct.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 19
Ref C21Top Gusset Bend
Ref C22
Internal and External GussetOpen Corner Bend
Ref C24Top Gusset Tee
Ref C25Front and Rear Gusset Tee
Ref C28Flange Tee
Ref C34Top Right AngleLeft Hand
Ref C48 InternalAngle
Ref C52Tapered Reducer
Ref C57Fire barrierUnit
Ref C4645 External Bend
Ref C60Gusset Square BackInternal Bend
Ref c4545 Internal Bend
Ref C61External GussetOpen Corner Bend
Ref C67Internal Angle
Ref C70Lapped Tee for use
with PartitionTrunking
Ref C4445 Top Bend
Ref C27Gusset cross
Ref C32Top Right AngleRight Hand
Ref C47External Angle
Ref C43Pier Set
Ref C33Top Square Tee
Ref C31Back Entry Tee
Ref C65Front Entry Tee
Ref C68 Change ofPlaneAngle Left HandIllustratedRight Hand Ref C69
8/10/2019 Floor Trunking works
24/36
Lighting Trunking
Ref 76
Bushed Fitting
and Conduit
Suspension Unit
Ref 62Spring TypeCable Retainer
Ref 41Zinc Plated
Copper Earth Link
Ref 38
End Cap
Ref 24
Gusset Tee
Ref 21Gusset Bend
Ref 37
Flange pair
Ref 42
Termination
Flange
Ref 61
External Gusset
Bend
Ref 60
Internal
Gusset Bend
SPECIFICATION
Cableduct Lighting Trunking complies
with BS467B Part 1 Galvanised. Thetrunking body is manufactured from
hot dipped, galvanised sheet steel and
is supplied in either self-colour
galvanised or white finish.
Other finishes can be supplied to
special order. Plastic snap-in lids are
extruded from rigid white PVC.
Body sections are supplied in 3 metre
lengths, steel snap-in lids in 2 metre
lengths and white plastic lids in 4metre lengths.
Body section and steel snap-in lids are
press brake formed to close tolerancefor ease of assembly and elimination
of distortion when cut on-site.
Note: body and lid must be orderedindividually.
Ref 59
Trunking
SuspensionSaddle for
20mm
Conduit
Ref 64
Trunking Suspension Saddlefor M10 Studding
Ref 66
Girder Clamp
Ref 62
Ref C40
All bends shown on page 19 (SurfaceTrunking) are available for Lighting Trunking.
Cableduct Limited - the complete cable management system20
8/10/2019 Floor Trunking works
25/36
The economicaI and easy-to-install
electrical distribution and suspended
lighting system.
THE ADVANTAGES:
Available in white or galvanised finish.
Exceptionally easy installation with asnap-in lid, running the entire length of
the trunking.
The snap-in cover can be inserted and
removed without disturbing the trunkingbody. The suspension saddles are
designed to be used with 10mm studding
(Ref 64) or 20mm conduit (Ref 59).
Cableduct Lighting Trunking can be fixedeither direct to girders, ceiling or
suspended from joists.
The Trunking body is supplied complete
with one connecting sleeve.
Note: to ensure electrical continuity an
earth link (Ref 4I) should be used at each
joint. If extra support is required in longspans (Ref 75) pressure sleeve should
be used.
Lighting Trunking
50
Ref B20
Body
Ref B22
Plastic Lid
Ref B23
Steel Lid
50
100
Ref L20
Body
Ref L22
Plastic Lid
Ref L23
Steel Lid
50
50
12
Ref F20
Body
Ref F22
Plastic Lid
50
100
12
Ref G20
Body
Ref G22
Plastic Lid
50
Ref 48 Internal Angle
Ref 33
Tee
Ref 47
External Angle
Ref 32 Angle
Ref B20 white with plastic clip on lid
Ref G20
Ref B20 with galvanised clip on lid
www.cableduct.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 21
8/10/2019 Floor Trunking works
26/36
The convenient and attractive way to
provide power, telephone, video, data
and other services at work height.
THE ADVANTAGES:
Service outlets can be positioned at
any point along the trunking runand can be easily moved after initial
installation to accommodate
changes in layout at any time.
Steel compartment dividers allowdata, telephone and power services
to be totally screened by metal
dividers. This prevents interference
and provides complete safetyrequirements.
Full data segregation provided using
screening saddles behind outlet
points.Trunking dividers provided with
20mm knock outs at 200mm
centres to position outlets at any
location.The use of joint cover strips
drastically reduces on-site metal
cutting requirements with any raw
edge being covered by the coverstrip.
Both trunking body and steel lid
supplied self-colour for painting on
site, or in a wide range of finishesincluding white high gloss coated
steel, stove enamelled and powder
coated.
Supplied in 2 metre lengthscomplete with connecting sleeves,
and lid fixings.
Available in two basic sections:
rectangular and bevelled. Cableduct Skirting and Underfloor,
Flushfloor and Raised Floor
Trunking can be inter-connected to
provide a versatile and attractivecable distribution system. Odd angle bends and pier sets are
available.
Skirting & Dado Trunking
Cableduct Limited - the complete cable management system22
J5/50with
J5/51Lid
J3/51BLid (fulldepth
return)
DD3 - shown in pre-coated high gloss white
K1 - shown powder coated
J3/51BLid (fulldepth
return)
J3/50with
J3/51Lid
J3/50with
J3/51Lid
J Range:40mm deep
150-300mm high
2,3 or 4 compartment
Square profile
150
200
100
50
50
50
100
300
100
50
110
40
40
40
40
8/10/2019 Floor Trunking works
27/36
SPECIFICATION:
Cableduct Skirting Trunking body is
manufactured from 1.2mm hot dippedgalvanised sheet steel. All skirting
trunking dividers are provided with
20mm knockouts at 200mm centres.
TO ORDER
Sections shown here are normally
available for delivery ex-stock.
Any other size or profile can bemade to order, delivery is usually
2-3 weeks depending on quantity
and finish required.
Odd angle bends and pier setsavailable to order.
FINISHES
Skirting lids with their respectiveaccessories can be supplied in:
Pre-coated high gloss white (W)
Galvanised steel sheet (Galv)
Powder Coated (P)Stove enamelled (SE)
Stainless Steel (SS)
Anodised aluminium (An)
Zintec self colour (Zn)
All profiles available as either Skirting (no return foldon underside of trunking) or Dado (full depth return
fold on underside).
Skirting & Dado Trunking
23
K1/50
with
K1/51
Lid
K2/50withK2/51Lid
K2/51B
K1/51 B
Ref DD2
Ref DD3
Ref DD4
150
110
40
40
40
50
50
50
200
100
50
50
100
150
75
37.5
50
100
200
50
37.5
20
80
J2 - shown powder coated, full depth return lid
K2 - shown in stainless steel
DD Range:
50mm deep
100-200mm high
2 or 3 compartment
K Range:
40mm deep, bevelled profile
150-200mm high
2 or 3 compartment
www.cableduct.l td.uk tel: 020 8683 1126 fax: 020 8689 7896
8/10/2019 Floor Trunking works
28/36
Skirting & Dado Trunking
Cableduct Limited - the complete cable management system24
Ref52 1 Gang Outlet Lid
Ref57 Lid Fixing Strap Ref51 2m Length Lid
RefDD3-50 with lid
Ref 51B complete
with lid fixing
Ref58 JointCover Strip
Ref72 Illustration of
data/telephone screening saddle
Ref60 Internal Bend
Ref61 External Bend
Ref60 Internal Bend
Ref61 External Bend
Ref56 Body Connector
Ref 54 2 Gang Outlet Lid Ref 64 Panel mount-
ing Power Outlet Lid
Accessories available
2 metre length body Ref 502 metre length lid Ref 51
1 gang outlet plate Ref 52
2 gang outlet plate Ref 54
Additional body fixing Ref 56Additional lid fixing Ref 57&58
End cap Ref 59
Internal bend Ref 60
External bend Ref 61Front entry tee left hand Ref 65
Front entry tee right hand Ref 66
Face tee up/down Ref 70/71
Screening saddle Ref 72Rear entry tee Ref 75/76
Face lid angle (see illust.) Ref 78-81
8/10/2019 Floor Trunking works
29/36
A range of purpose made odd
angle bends and pier sets are
available to suit all Cableductsskirting, dado and bench trunking.
Cableduct engineers will measure
for customers on site. However, the design of Cableduct
trunking is such that pier sets can
be easily fabricated on-site using a
combination of inside and outsidebends.
The use of cover strips means that
lids can be cut on-site around
piers without detracting from the
appearance.
Skirting & Dado Trunking
www.cableduct.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 25
Ref 66 Front Entry Tee Right HandIllustrated (Left Hand Ref 65)
Ref 77 Conduit Base Entry
Cable Entry
Ref 63 Back EntryIllustration of face lid
bends for door frame
set, with lidsremoved.
Ref 78
Ref 79
Ref 81
Ref 80
Ref FF 134 Vertical
Bend for use with
Flush Floor trunking
Ref 62
Base Entry
Ref 75 Rear Entry Tee
Left Hand Illustrated
(Right Hand Ref 76)
8/10/2019 Floor Trunking works
30/36
Bench Trunking
Ref157
Lid Fixing
Strap
External Bend
Internal Bend
Ref158
Joint Cover
Strap
RefV1/159 End cap
The practical and stylish solution to
providing services on benches and
desks.
THE ADVANTAGES:
Ideal for data processing installations,
laboratories, work shops, designstudios and any location requiring a
simple-to-install system of providing
services close at hand.
No cable kinks or sharp bends thanksto the angled face of the trunking,
fixed to the top surface of the
workstation or bench.
Outlets for mains electrical supply,telephone, data and other services
can be fitted and existing ones
relocated easily without disrupting
the system. Available with one or two
compartments to allow the
segregation of medium and low
voltage cables. Supplied self-colour for painting on
site, or in a wide range of finishes
including stove enamelled and
powder coated.
SPECIFICATION
Cableduct Bench Trunking body is
manufactured from 1.2mm galvanisedand the lid from 1.2mm Zintec sheet
steel. The lid may also be adapted to
suit manufacture in stainless steel or
other specific requirements.
Accessories AvailableAdditional body connection Ref 156
Internal bend Ref 162
External bend Ref 163
Front entry tee Ref 175Back entry tee Ref 176
Face lid angle top LH Ref 178
Face lid angle bottom LH Ref 179
Face lid angle top RH Ref 180Face lid angle bottom RH Ref 181
25
100
100
Ref V1 Trunking
Body and Lid(1 or 2 compartment)
RefV1/1742 Gang Panel Mounted
Switch Socket Lid
Complete with Sockets
RefV1/152
1Gang Lid
RefV1/154 2
Gang Lid
V1/162 Internal Bend (lid finished white)
V1/160 Bench Trunking body and V1/161 lid (lid finished white)
Cableduct Limited - the complete cable management system26
8/10/2019 Floor Trunking works
31/36
The unobtrusive, low-profile,
easy-to-use system.
THE ADVANTAGES
Provides an easy sweep for the
flexible cable from a 13 amp plug.
Fits under or on most desks andother furniture - leaves gangways
clear and avoids the risk of an
accident.
Finished black nylon coated orwhite powder coated as standard.
Other finishes, including powder
coated, stove enamelled, and other
colours are also available tospecial order.
Also available in brushed stainless
steel.
Special combinations can be madeto order.
SPECIFICATION
Cableduct Low Profile Pedestal Boxesare manufactured from 1.2mm steel
and are fitted with an earth bush.
Pedestal Boxes designed for use withboth medium and low voltage service
outlets in one single box have a steel
screen between the two sides for
segregation and to meet IEERegulations.
Pedestal Boxes
Ref 454 Single
Sided Two Gang
Sketch of FourSided Two Gang
(Other combinations available)
Ref 459 Double
Sided Two Gang
Ref 442 Double
Sided One Gang
Ref 443 Double
Sided Dual
Ref 458Single Sided Dual
Ref 452 Single
Sided One Gang
Ref 456 Single
Sided Triple
Dimensions
Width: One gang 95mmTwo gang or dual 190mm
Depth: Single sided 95mm
Double sided 190mmOverall height: 60mmHeight
Width
Depth
www.cableduct.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 27
8/10/2019 Floor Trunking works
32/36
ADVANTAGES:
Fitted between floor and ceiling and
may be wired from top or bottom. Pole heights are adjustable to
varying room heights, with firm
fixings to floor and ceiling systems.
Designed to keep open the optionto change or add services at any
time, with the minimum of
upheaval.
The Cableduct Desk Post offers thesame facilities. It finishes below
desk top height and is fed from the
floor.
SPECIFICATION
The Cableduct Service Pole is supplied
up to 3.6 metre in length, andmanufactured from extruded
aluminium. The standard section size
is 130 x 110mm x 3 compartments.
Outlet plates for power, data,
telephone and other services can be
mounted in any position along the
pole length.
Service Poles
Cableduct Limited - the complete cable management system28
DESKPOSTRef 316
Ref 3160
POWERSTAC
SERVICE POLE
The hinged door hidesunsightly plugs and
trailing cables
190mm1
08mm
700mm
100mm
600mm
600mm
600mm
600mm
3600mm
(maximum)
HingedLid
HingedLid
HingedLid
1800mm
FixedLid
FixedLid
127mm
Fixed
Lid
Example shows 3.6m
Service Pole. Any length up
to this height can be made.
Hinged and fixed sectionscan be any length.
Ref 3582
Fitted with 2 x 1 Gang
Switched Socket OutletsNote, Ref 3554 with
1 x 2 Gang S.S.O
Ref 3555 Fitted with2 x 1 Gang Unswitched
Socket Outlets
Ref 3591 To Accept
4 x RJ45 Outlets
Ref 3558
To Accept 2 x 1
Gang Outlets
Many other plate combinations available, including non-standard sockets.
8/10/2019 Floor Trunking works
33/36
POWERSTAC SERVICE POLE AND
POST provide the versatile system
that enhances the office environmentwith an attractive and convenient
way to provide services to island sites.
THE ADVANTAGES:
Specially designed for supplying
multiple services at desk or worktop height to island sites
unobtrusively in open plan offices,
showrooms, laboratories and
workshops without trailing wires.
The hinged door hides unsightly
plugs and trailing cables.
Allows medium, low voltage and
data service to be segregated and
screened for maximum safety and to
meet British Standard requirements.
Easy to fit and to move to another
ducting point when the office needs
to be re-arranged.
Tough, attractive, easy-to-clean
surface available either powder
coated in any colour or in ananodised finish.
Service Poles
www.cableduct.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 29
8/10/2019 Floor Trunking works
34/36
The hard-wearing, continuous chassis
for speedy installation of wires,
cables and pipework.
THE ADVANTAGES:
Straight runs, both horizontal and
vertical, junctions, changes of leveland width, can be of angles, tees,
crossovers, risers, gusset bends and
reducers as illustrated.
STANDARD ADMIRALTY
PATTERN CABLE TRAY
A practical solution to the problem
of carrying light electrical cabling ortelephone wiring over distances
without snagging or obstruction.
Connections can be made, where
required, by the addition of spliceplates fixed to the underside of the
tray.
LIGHT DUTY RETURN FLANGE
CABLE TRAY
Retains the lightness and ease offixing of the standard type, but has a
higher loading capacity.
Ideal for heavier installations
because of its rigid construction. Connections easily made by the
specially designed couplers which
are attached to return flanges with
fixing nuts, screws and washers.
Please specify whether galvanised
before manufacture (to BS2989) or
galvanised after manufacture (toBS729) is required.
Cable Trays
Cableduct Limited - the complete cable management system30
Ref F
Reducer
Ref B
Gusset Bend
STANDARD ADMIRALTY
HEAVY DUTY RETURN FLANGE
Ref J
Gusset Tee
Ref K
Gusset Cross
Ref A B Gauge
L3 75 12.5 1.0
L4 100 12.5 1.0
L6 150 12.5 1.0
L9 225 12.5 1.2
L12 300 19 1.5
6
Ref A B C D
H6 150 50 14
6H9 225 50 14
6H12 300 50 14
6H18 450 50 14
6
0.9
1.2
1.2
1.4
1.4H24 600 50 14
6
Ref A B C D
M4 100 25.4 7.94
6M6 150 25.4 7.94
6M9 225 25.4 7.946M12 300 25.4 7.94
0.7
1.0
1.01.0
Gauge
Gauge
TRAY DIMENSIONS
MILLIMETRE(S)
TRAY DIMENSIONS
MILLIMETRES
LIGHT DUTY RETURN FLANGE
8/10/2019 Floor Trunking works
35/36
Cable Trays
www.cableduct.l td.uk tel : 020 8683 1126 fax: 020 8689 7896 31
Ref M
Connection
Ref E
Inside Riser Bend
Ref D
Outside Riser Bend
Ref P
Reducer Tee
3 metre Length Cable Tray
HEAVY DUTY RETURN FLANGE
CABLE TRAY
Has fewer perforations, a deeperreturn flange and is manufactured
from heavier gauge steel.
Ideal for heavier loadings but simple
to install and connect.
SPECIFICATION
Cableduct Cable Trays are
manufactured in one piece from aperforated mild steel sheet and hot-
dipped, galvanised to BS 729:1971
after manufacture or from pre-
galvanised sheet steel to BS2989.
All slots are finished a short margin
from the ends to avoid sharp edges.
Connecting plates are specifically
designed to enable uniformally
distributed loads to be applied
throughout the run of cabling withoutoverloading the connections.
8/10/2019 Floor Trunking works
36/36
Capacity Guide
All galvanised steel used to manufacture our
Trunking is Hot Dip zinc coated Type G 275coating min 275 GM/SQ meters both sides
grade Z2 to BS 2989 = 1982
Cable Trunking Capacity Guide and Graph
150 x 150
TRUNKING
DIMENSIONS(mm)
150 x 100
100 x 100
75 x 75100 x 50
75 x 50
50 x 50
1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 11,000 12,000 13,000 14,000 15,000
FACTOR
TABLE A
TABLE B
Cable Factors for Trunking
Type of Conductor Factor
Conductor Cross-sectionarea mm2
Solid 1.5 7.1
2.5 10.1
Stranded 1.5 8.1
2.5 11.44 15.2
6 22.910 36.3
16 50.325 75.4
35 95.050 133.0
Factors for Trunking
Trunking Dimensions mm Factor
50 x 50 103775 x 50 1555
75 x 75 2371100 x 50 2091
100 x 100 4252
150 x 100 6394150 x 150 9697
The above data is based on the 15th edition of I.E.E wiring regulations for electrical installation (1981)
which allows for a space factor of 45%.Trunking size is determined by multiplying the number of each single core pvc insulated cable size by
the appropriate factor shown in Table A. This amount is compared with the factor shown in Table B.This factor should either equal or exceed the final factor used.
TABLE C
Capacities for 450/750V PVC Covered Cable ( Nominal Conductor Size mm2 )
1.5 1.5* 2.5 2.5* 4 6 10 16 25 35 50
FCT22 128 146 90 101 68 45 28 20 13 10 7
FCT32 191 219 136 152 102 67 42 30 20 16 11FCT33 292 333 207 232 155 103 65 47 31 24 17
FCT42 258 294 183 205 137 91 57 41 27 22 15FCT44 524 598 372 416 279 185 117 84 56 44 32
FCT64 789 900 560 626 420 279 176 127 84 67 48FCT66 1197 1365 850 950 637 423 267 192 128 102 73
*Denotes Solid Conductor
MATERIAL SPECIFICATIONS
Cable Trunking, body, lids, couplers and allaccessories are manufactured from hot dipped
galvanised steel to BS 2989.
LIGHTING TRUNKING
SUSPENSION SPACING
Size Thickness mmmm Body Lid
50 x 50 1.0 1.0
75 x 50 1.2 1.275 x 75 1.2 1.2
100 x 50 1.2 1.2100 100 1 2 1 2
Type Size Gauge Centre Maximum DeflectionLoading Spacing
B 50 x 50 1.2 13.5kg 2.25 9mm
F 50 x 50 1.2 13.5kg 2.5M 9mm
L 100 x 50 1.2 13.5kg 3M 9mmF 100 50 1 2 13 5k 3 25 9