This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
To be specified
Centoco
CAD $34.79
500STSCC.001 Toilet Seat, Heavy Duty, for elongated bowl, open front,solid plastic, open front, less cover, stainless steel check hinges, metalflat washers stainless steel posts and nuts.
Sloan
CAD $247.52
111-1.28-CP Royal Exposed Manual Flushometer for Top SpudToilet, polished chrome finish, 4.8 L (1.28 US Gal) factory set flow, quietaction 'PERMEX' diaphragm type with dual filter by-pass, non-hold openfeature, A.D.A triple seal oscillating handle, V.P. Smooth design stop capon bak-chek angle stop (screwdriver operated), high pressure vacuumbreaker.
Flange
Provide Floor Flange, (same material as the connecting pipe drain), withall brass bolts and with rubber gasket.
3461.001.020
CAD $437.00
Floor Mounted - floor outlet - white finish - vitreous china with EverCleanantimicrobial surface which inhibits the growth of stain and odor causingbacteria mold and mildew- elongated bowl - siphon jet flush action - condensatechannel - elongated bowl - 54 mm (2-1/8") fully glazed internal trapway - boltcaps - 38 mm (1-1/2") dia. Top spud .Minimum working pressure range: 25 psi to 80 P.S.I. (550 kPa) maximum.Nominal Dimensions: 356 mm (14") wide x 718 mm (28-1/4") front to back x419 mm (16-1/2") high.Water Surface: 305 mm x 254 mm (12" x 10") water surfaceShipping Weight: 26 kg (59 lbs)Water Consumption: HET operates in the range of 4.2 L to 6 L (1.1 US Gal to1.6 US Gal) per flush
AM820STS.001 Toilet Seat, extra heavy duty, for elongated bowl, openfront, solid plastic with antimicrobial surface, open front, with cover,stainless steel check hinges, metal flat washers stainless steel posts andnuts.
Sloan
CAD $269.08
111-1.28-CP-YG Royal Exposed Manual Flushometer for Top SpudToilet, polished chrome finish, 4.8 L (1.28 US Gal) factory set flow, quietaction 'PERMEX' diaphragm type with dual filter by-pass, non-hold openfeature, A.D.A triple seal oscillating handle, extended seat bumper on,V.P. Smooth design stop cap on bak-chek angle stop (screwdriveroperated), high pressure vacuum breaker.
Flange
Provide Floor Flange, (same material as the connecting pipe drain), withall brass bolts and with rubber gasket.
3461.001.020
CAD $437.00
Floor Mounted - floor outlet - white finish - vitreous china with EverCleanantimicrobial surface which inhibits the growth of stain and odor causingbacteria mold and mildew- elongated bowl - siphon jet flush action - condensatechannel - elongated bowl - 54 mm (2-1/8") fully glazed internal trapway - boltcaps - 38 mm (1-1/2") dia. Top spud .Minimum working pressure range: 25 psi to 80 P.S.I. (550 kPa) maximum.Nominal Dimensions: 356 mm (14") wide x 718 mm (28-1/4") front to back x419 mm (16-1/2") high.Water Surface: 305 mm x 254 mm (12" x 10") water surfaceShipping Weight: 26 kg (59 lbs)Water Consumption: HET operates in the range of 4.2 L to 6 L (1.1 US Gal to1.6 US Gal) per flush
Co-ordinate F.V. height with grab bars. (see arch. drawings)
420-E2805-ABCP Single Handle lavatory Faucet, chrome plated, 1hole, 4" (102 mm) centerset, ECAST construction lead free (equal or lessthan 0.25%) ECAST brass construction, vandal resistant 1.9 LPM (0.5GPM) pressure compensating Econo-Flo non-aerating spray outlet,117 mm (4-5/8") projection rigid cast brass spout, single metal leverhandle, 13 mm (1/2") NPSM supply inlets and coupling nut for flexibleriser.
Lawler
CAD $115.75
TMM-1070 Below Deck Mechanical Water Mixing Valve, bronze body,temperature adjusting dial, 10 mm (3/8") inlets and outlet compressionfittings, high temperature thermostatic limit stop, shut-off with automaticreset when temperature exceeds 120 ºF (48.8 ºC), integral checks, offertemperature range from full cold through 46 °C (114.8 °F).
Provide tee, adaptors and flex. copper tubing to suit installation.
Provide tempered water to hot side of faucet.
McGuire
CAD $24.08CAD $36.04CAD $49.82
155A Open Grid Drain, cast brass one piece top, 17 GA. (1.5 mm)tubular 32 mm (1-1/4") tailpiece.
8872C P-Trap, chrome plated, heavy cast brass adjustable body, withslip nut, 32 mm (1-1/4") size, with cleanout, shallow wall flange andseamless tubular wall bend.
0321.026.020 - 3 holes, 4" (102 mm) center
CAD $128.00
Wall hung Basin - vitreous china - white finish - 3 holes, 4" (102 mm) center -rear overflow - faucet ledge - soap depression - 32 mm (1-1/4") waste assembly(not included) - wall hanger .Nominal Dimensions: 470 mm (18-1/2") wide x 432 mm (17") front to back x286 mm (7-3/4") high.Bowl Dimensions: 362 mm x 273 mm x 152 mm (14-1/4" x 10-3/4" x 6")Shipping Weight: 16.3 kg (36 lbs)
WCA-411 Basin Carrier, concealed arms, wall flanges to attach tobacking plate secured in wall with locking device and levelling screws,heavy gauge steel uprights with integral welded feet, levelling screws,locking device and plated hardware.Minimum space required: for one unit: 102 mm (4") for two to six units ina row: 152 mm (6") finished metal stud wall to back of pipe space.
3510-4E2805ABCP Single Handle Faucet, chrome plated finish, 3 hole,4" (102 mm) centerset, ECAST construction lead free (equal or less than0.25%) cast brass body, ceramic quarter turn operating cartridge, vandalresistant 1.9 LPM (0.5 GPM) pressure compensating Econo-Flo non-aerating spray outlet, lever handle, stainless steel braided hose,adjustable hot limit safety stop.
Lawler
CAD $115.75
TMM-1070 Below Deck Mechanical Water Mixing Valve, bronze body,temperature adjusting dial, 10 mm (3/8") inlets and outlet compressionfittings, high temperature thermostatic limit stop, shut-off with automaticreset when temperature exceeds 120 ºF (48.8 ºC), integral checks, offertemperature range from full cold through 46 °C (114.8 °F).
Provide tee, adaptors and flex. copper tubing to suit installation.
Provide tempered water to hot side of faucet.
McGuire
CAD $24.08CAD $36.04CAD $49.82
155A Open Grid Drain, cast brass one piece top, 17 GA. (1.5 mm)tubular 32 mm (1-1/4") tailpiece.
8872C P-Trap, chrome plated, heavy cast brass adjustable body, withslip nut, 32 mm (1-1/4") size, with cleanout, shallow wall flange andseamless tubular wall bend.
CAD $115.08
PW2000 PROWRAP Sanitary Covering vandal-resistant, flexibleseamless moulded closed-cell PVC resin, formulated with anti-microbialadditive to limit the growth of fungus and bacteria, to exposed piping (toprotect against heat/contusions) as per local codes.
9024.004EC.020 - 3 holes, 4" (102 mm) center
CAD $322.00
Wall hung Basin - vitreous china - white finish - 3 holes, 4" (102 mm) center -front overflow - self-draining faucet ledge - 32 mm (1-1/4") waste assembly (notincluded) - this basin does not meet QBC .Nominal Dimensions: 464 mm (18-1/4") wide x 510 mm (20-1/16") front to backx 127 mm (5") high.Bowl Dimensions: 354 mm x 325 mm x 127 mm (13-15/16" x 12-13/16" x 5")Shipping Weight: 16.8 kg (37 lbs)
Watts
CAD $388.50
WCA-411 Basin Carrier, concealed arms, wall flanges to attach tobacking plate secured in wall with locking device and levelling screws,heavy gauge steel uprights with integral welded feet, levelling screws,locking device and plated hardware.Minimum space required: for one unit: 102 mm (4") for two to six units ina row: 152 mm (6") finished metal stud wall to back of pipe space.
897-RCF Wall Mounted two handles utility / mop Faucet, RoughChrome Finish, 2 hole, 8" (203 mm) centerset, solid brass exposed body,rigid copper connections, ceramic 1/4 turn operating cartridge,unrestricted hose end outlet, 203 mm (8") projection spout withatmospheric vacuum breaker and bucket hook, 60 mm (2-3/8") metalvandal proof lever handles with blue and red index buttons, wall bracesupport.
Stern Williams
A-20 Bumper Guard anodized aluminum cap
T-35 Hose and Wall Hook 36" (914 mm) long hose with 3/4" (19 mm)chrome coupling, stainless steel wall bracket.
T-40 Mop Hanger stainless steel #4 finish, 24" (610 mm) long with 3rubber spring loaded clips.
BP Back Splash Panel 20 GA. (0.9 mm) type 304 stainless steel.
P-Trap
Provide P-Trap, same material as the connecting pipe drain.
MTB-2424
CAD $603.36
Service / Mop Sink square - floor mounted - terrazzo composed of pearl graymarble chips and Portland cement ground smooth sealed to resist stain - castbrass drain with stainless steel strainer, 3"(75 mm) outlet .Nominal Dimensions: 610 mm (24") wide x 610 mm (24") long x 254 mm (10")highShipping Weight:
SPECIFICATION: Watts Drainage Products RD-100 epoxy coated cast ironroof drain with deep sump, wide serrated flashing flange, flashing clamp device with integral gravel stop and self-locking polyethylene (standard) dome strainer.
-V Fixed Extension (1-1/2",2",3",4")-W Adj. Water Level Regulator-W-1 Waterproofing Flange-Z Extended Integral Wide Flange-5
-83 Mesh Covered Dome
-113M Special Epoxy from 3M Range
Sediment Bucket-12 Galvanized Dome-13 All Galvanized
-E Adjustable Extension
WATTS Drainage reserves the right to modify or change product design or construction without prior notice and without incurring any obligation to make similar changes and modifications to productspreviously or subsequently sold. See your WATTS Drainage representative for any clarification. Dimensions are subject to manufacturing tolerances.
** Side Outlet (-SO) option only available in 2"(51), 3"(76), 4"(102) pipe sizes. Underdeck Clamp (-BED and -D options) are not available when -SO is selected.
-K80 Aluminum Dome
98
CANADA
cmuir
Stamp
cmuir
Stamp
cmuir
Text Box
RD-1
Computer02
Reviewed
User
Review Stamp (Transparent)
HY-420
SPECIFICATION: Watts Drainage Products HY-420 non-freeze key operated wall hydrant with chrome plated face, integralvacuum breaker, 3/4"(19) hose connection, all bronze head, seat casting and internal working parts, galvanized wall casing and hydrant key.
Non-Freeze Exposed Hydrant with Vacuum BreakerTag:
FUNCTION: For installation in exterior walls that will be exposed to freezing temperatures, where a self draining hydrant with integral vacuum is required.
Watts product speci�cations in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, speci�cations, or materials without prior notice and without incurring any obligation to make such changes and modi�cations on Watts products previously or subsequently sold.
2 13/16” (71)
cmuir
Stamp
cmuir
Text Box
NFHB-1
Computer02
Reviewed
User
Review Stamp (Transparent)
Cast Brass Hose BibbType Boiler DrainModel HB-1 Sizes: 1/2" I.P. Male x 3/4" Hose Thread or1/2" Nom. Copper x 3/4" Hose ThreadCombination threaded and sweat end x 3/4" National hoseconnection
Provides backsiphonage protection for portable hoses connectedto hose thread faucets.
Features• Built-in backflow protection• Integral vacuum breaker -
If valve is disassembled, hose cannot be attached.• Drainable in cold weather - Pull knob to drain.• Meets ASSE Standard 1011.
Drainage Feature To Prevent Freezing model HB-1 is standardly equipped to allowsill cock to be drained. To do this, remove hose coupling andlightly pull knurled tip of stem at outlet of valve to allow drainage ofcollected water.
For Residential and Commercial ApplicationsES-HB-1
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
IMPORTANT: INQUIRE WITH GOVERNING AUTHORITIESFOR LOCAL INSTALLATION REQUIREMENTS
HB-1
cmuir
Text Box
HB-1
Computer02
Reviewed
User
Review Stamp (Transparent)
StandardsASSE 1011
How It WorksWatts HB-1 sill cock is permanent, tamper-proof protection.Disconnecting the Vacuum breaker portion of the valve makesa hose connection impossible. Under normal conditions, theinner diaphragm opens to permit generous flow, while the cir-cumferential diaphragm closes the air vents.
Should supply pressure drop and a backflow begin, the innerdiaphragm immediately closes to prevent backflow into themain line, while the circumferential diaphragm opens the airvents to break the Vacuum.
ApprovalsTested and approved in Conformance with Standard 1011 ofthe American Society of Sanitary Engineers and by all principalcities, states and areas having these requirements.
DIMENSIONS
No. Size Master Weight A B C D(lbs.) kg. in. mm in. mm in. mm in. mm
SPECIFICATION: Watts Drainage Products FD-100-C-A epoxy coated cast iron floor drain with anchor flange, reversible membrane clamp with primary and secondary weepholes,1/4"(6) thick (specify diameter) adjustable nickel bronze (standard) strainer, and no hub (MJ) (standard) outlet.
Floor Drain withRound Strainer
Job Name
Job Location
Engineer
Contractor
Contractor's P.O. No.
Representative
Components:FC-1B3
* The load classifications are in accordance with the American National Standards ASME A112.21.1M ASME Ratings are as follows: MD - Safe Live Load 2000-4999 lbs.(900-2250kg) The above categories are given as a guide only. Please consult factory.
WATTS Drainage reserves the right to modify or change product design or construction without prior notice and without incurring any obligation to make similar changes and modifications to productspreviously or subsequently sold. See your WATTS Drainage representative for any clarification. Dimensions are subject to manufacturing tolerances.
SPECIFICATION: Watts Drainage Products FD-100-C-DD epoxy coated cast iron floor drain with anchor flange, reversiblemembrane clamp with primary and secondary weepholes, adjustable nickel bronze (standard) hub funnel, and no hub (MJ) (standard) outlet.
Floor Drain withHub Funnel
Job Name
Job Location
Engineer
Contractor
Contractor's P.O. No.
Representative
Components:FC-1B3 BLT3-XYC
Tag:
DD
8-1/8"(206)
5" (127)
PRIMARY WEEPHOLES
REVERSIBLE MEMBRANE CLAMP
SECONDARY WEEPHOLES
SEEPAGE COLLECTION SUMP
SERRATED FLANGE
B3 BODYPUSH-ON SHOWN
(P) PUSH-ON GASKET(ASTM C-564)
1/2"(13) NPTTRAP PRIMER
CONNECTION
PIPE STOP
"DD" INDIRECT WASTE HUB
2-1/4"(57)See Chart A
2"(51), 3"(76), 4"(102)PIPE SIZE
6"(152) NH (MJ) only
Adj.Range 7/8"(22)- 3"(76)
DD-1 NOT 14DD-50 APPLICABLE 14
Nickel BronzeDD-1Cast IronDD-50
WATTS Drainage reserves the right to modify or change product design or construction without prior notice and without incurring any obligation to make similar changes and modifications to productspreviously or subsequently sold. See your WATTS Drainage representative for any clarification. Dimensions are subject to manufacturing tolerances.