1 YOUR STONE, TILE & GROUT SPECIALISTS Sealers, Cleaners, Problem Solvers Maintenance, Restoration www.floormedics.com.sg CO REG NO: 201320831R Technical Bulletin DESCRIPTION / FEATURES: FLOOR MEDICS PH CLEANER is a premixed acidic designed to remove grout haze, mineral deposits, rust stains, mortar smears, and efflorescence. Effective for the removal of most hard water stains, lime deposits, and soap scum. Also removes cement grout and mortar residue from tile, concrete, and masonry. Etches concrete. USES: • Recommended for use on granite, porcelain tiles and other acid resistance stone & tile surfaces. AVAILABLE SIZES: • PH Cleaner is available in 5 Litres or 25 Litres / bottle COVERAGE: • Depending on dilution and condition of floors treated, approximately 400 to 1,200 sq ft. (35m2 to 110m2) per gallon. METHOD OF APPLICATION: - Read entire label before using. - TEST A SMALL AREA, according to application instructions, to determine desired results. 1. Sweep, vacuum or dust mop the floor surface. 2. Mix 1 part of Floor Medics PH Cleaner to 5 parts of water for light duty cleaning such as removal of light cement & grout haze. 3. Apply solution onto surface, allow to dwell 1 to 2 minutes and scrub surfaces with nylon bristle brush or pads 4. Rinsed with water and vacuumed dry cleaned surface. LIMITATIONS: • Do not mixed solution with ammoniated cleaners such as bleach as harmful fumes will result. • Do not allow solutions to come into contact with non-recommended surface • Acidic solutions will etched, lighten or change the colour of cementatious material and some natural stones like marble, limestone or other acid sensitive tiles. HANDLING AND STORAGE: • Close container after each use. • Store in original container only. • Unused, Store product is freeze-thaw stable.