Flanged Butterfly Valves Municipal Water & Waste Water Model 45 AWWA C504 Size 3” - 24” - Class 150B Flomatic Valves High Quality Valves Built to Last... High Quality Valves Built to Last… Click to see: Azure Butterfly Valves in our Online Catalog
Butterfly Valve
Flanged Butterfly ValvesMunicipal Water & Waste Water
Model 45
AWWA C504
Size 3” - 24” - Class 150B
Flomatic Corporation 15 Pruyn’s Island Drive
Glens Falls, NY 12801-4421
Telephone: 1-(800)-833-2040 Direct Telephone: 1-(518)-761-9797
Fax: 1-(800)-314-3155 Direct Fax: 1-(518)-761-9798
www.flomatic.com
High Quality Valves Built to Last...Flomatic Valves
© Copyright 2014 by Flomatic #YAzure Rev. 2/14
The Flomatic Model 45 butterfly valves shall be manufactured in accordance with the latest version of AWWA C504. The butterfly valves shall be a tightclosing, rubber seated design providing bi-directional bubble tightness. Thevalve shall be suitable for throttling service and/or operation after long periodsof inactivity.
GENERAL
The valve bodies shall be constructed of ductile iron ASTM A536,for valve class 150B and 250B pressure ratings. Cast iron bodiesare not acceptable. Flanges shall be in conformance with ANSIStandard B16.1, Class 125 drilling.
BODY
Suggested Specification
The shaft bearings shall be sleeve type constructed of a self lubricating, corrosion-resistant material. The bearings shall bedesigned to support horizontal and/or vertical shaft loading.
BEARINGS
VALVE DISC The valve disc shall be constructed of cast ductile iron ASTM A536with 316 stainless steel edges, with the exception of 3” and 4”sizes, which shall be constructed of cast 316 stainless steel perASTM A351. The valve disc shall be a center positioned, concentricdesign without ribs or obstructions for improved flow and lowhead loss.
The valve shaft shall be a one piece through disc design construct-ed of stainless steel ASTM A276 type 316. The shaft shall be fastened to the disc utilizing taper pins providing leak-proof connection between the shaft and disc.
SHAFT
The valve seat and interior waterway shall be bonded and vulcanized with rubber. The seat shall cover the entire interiorwater way and flange surface.
SEAT
PACKINGThe packing shall be a rubber, V-type designthat is self adjusting and wear compensating.The valve packing arrangement shall allowfor removal of the actuator without failureof the packing seal.
PAINTThe butterfly valves shall be coated with afusion bonded NSF 61 epoxy powder.
TESTINGThe butterfly valves shall be hydrostatic andleak tested in accordance with AWWA C504.
Flomatic ValvesHigh Quality Valves Built to Last...
Specifications
High Quality Valves Built to Last…
27595 Azure_AZURE Lit. 7.18.06 3/27/14 8:37 AM Page 1
Click to see: Azure Butterfly Valves in our Online Catalog
* Part numbers above with Gear Operator, for bare stem add B after part #
Contact our factory for larger models or other types of butterfly valves.
Dimensions
Features and Benefits
AZURE® AWWA Flanged Butterfly Valves Model 45 Flanged Size Range 3” - 24”
PRESSURE: Class 150B and AWWA Standard C504
BodyDuctile iron ASTM A536 for greater strength and higher pressure rating. AWWA Class 150B and250B short body design.
PaintFusion bonded epoxy powderconforming to NSF 61 and AWWA Standard C550.
ShaftKeyed one piece ASTM A276 type316 stainless steel through shaftdesign providing minimal deflection.Slotted shaft top indicates position.
PackingV-type Packing design. Buna-Npacking is self adjusting and wear compensating.
Standard ISO Mounting Pad - Insures actuator compatibility
Seat Standard NBR (Buna-N)(other materials available) seat bondedand vulcanized to the body of thevalve in compliance with AWWAstandard C504. Resilient seat fullyencapsulates the body, providingfurther corrosion protection andlonger life.
Bearings Nylatron GSM Shaft Bearing, self lubricating,corrosion-resistant material.Bearings are designed forhorizontal and verticalshaft loading.
Thrust Bearing Fusion bonded epoxy conforming to NSF 61 andAWWA Standard C550.(acetal delrin® dupont)
Disc / ShaftConnection Two (2), taper pins providing apositive leak-proof connectionbetween the shaft and disc.
Disc Edge Stainless Steel Type 316
Valve Disc Center positioned for higher flowcapability. Cast Ductile IronASTM A536 with stainless steeltype 316 edges for strengthlonger life. Rounded machinededge for lower torque. 3” and 4”sizes, all cast ASTM A351 type316 stainless steel.
FEATURES:Sizes 3”, 4”, 6”, 8”, 10”, 12”, 14”, 16”, 18”, 20”, 24”Flanged body styleDuctile Iron Body and DiscBonded seat in bodySymmetrical lens shaped discNylatron GSM nonmetallic self lubricating bearingsV-type packingFusion epoxy paint
Model 45 Model 45
VALVE SIZE
PART NUMBER
A B C D E F G H J K L M N P Q R S TWEIGHT (LBS.)
3" 450100060 5.16 3.74 5.00 3.10 7.50 6.00 (4) 3/4" .94 15.00 7.88 6.13 1.75 5.75 .50 .13 1.20 .39 2.76 43
4" 450100070 5.91 4.49 5.00 4.09 9.00 7.50 (8) 3/4" .94 14.61 8.90 6.85 1.77 5.75 .63 .13 1.13 .39 2.76 54
6" 450000090 7.09 5.47 5.00 6.14 11.00 9.50 (8) 7/8" 1.00 17.09 8.90 6.85 1.77 5.75 1.00 .24 1.23 .39 2.76 74
8" 450000100 8.27 6.89 6.00 8.00 13.50 11.75 (8) 7/8" 1.13 22.56 12.32 9.33 2.48 11.31 1.13 .32 2.00 .46 4.02 134
10" 450000110 9.69 8.00 8.00 9.88 16.00 14.25 (12) 1" 1.18 25.24 12.32 9.33 2.48 11.31 1.38 .39 2.00 .46 4.02 188
12" 450000120 10.87 9.53 8.00 11.89 19.00 17.00 (12) 1" 1.25 27.36 12.09 8.86 3.15 11.31 1.50 .39 2.09 .55 4.92 261
14" 450000140 12.91 10.08 8.00 14.00 20.98 18.74 (12) 1-1/8" 1.38 30.59 12.09 8.86 3.15 11.31 1.50 .39 2.09 .55 4.92 380
16" 450000160 14.76 11.81 8.00 16.00 23.50 21.24 (16) 1-1/8" 1.44 37.01 16.61 11.50 4.72 15.50 2.00 .63 3.00 .70 5.51 414
18" 450000180 15.94 12.60 8.00 18.00 25.00 22.76 (16) 1-1/4" 1.56 38.98 16.61 11.50 4.72 15.50 2.00 .63 3.00 .70 5.51 532
20" 450000200 17.64 13.98 8.00 20.00 27.52 25.00 (20) 1-1/4" 1.69 40.31 18.82 13.44 4.78 15.50 2.13 .63 3.64 .87 6.50 653
24" 450000240 20.39 17.52 8.00 24.00 32.01 29.51 (20) 1-3/8" 1.88 46.61 18.82 13.44 4.78 15.50 2.25 .72 4.50 .87 6.50 739
27595 Azure_AZURE Lit. 7.18.06 3/27/14 8:37 AM Page 2
* Part numbers above with Gear Operator, for bare stem add B after part #
Contact our factory for larger models or other types of butterfly valves.
Dimensions
Features and Benefits
AZURE® AWWA Flanged Butterfly Valves Model 45 Flanged Size Range 3” - 24”
PRESSURE: Class 150B and AWWA Standard C504
BodyDuctile iron ASTM A536 for greater strength and higher pressure rating. AWWA Class 150B and250B short body design.
PaintFusion bonded epoxy powderconforming to NSF 61 and AWWA Standard C550.
ShaftKeyed one piece ASTM A276 type316 stainless steel through shaftdesign providing minimal deflection.Slotted shaft top indicates position.
PackingV-type Packing design. Buna-Npacking is self adjusting and wear compensating.
Standard ISO Mounting Pad - Insures actuator compatibility
Seat Standard NBR (Buna-N)(other materials available) seat bondedand vulcanized to the body of thevalve in compliance with AWWAstandard C504. Resilient seat fullyencapsulates the body, providingfurther corrosion protection andlonger life.
Bearings Nylatron GSM Shaft Bearing, self lubricating,corrosion-resistant material.Bearings are designed forhorizontal and verticalshaft loading.
Thrust Bearing Fusion bonded epoxy conforming to NSF 61 andAWWA Standard C550.(acetal delrin® dupont)
Disc / ShaftConnection Two (2), taper pins providing apositive leak-proof connectionbetween the shaft and disc.
Disc Edge Stainless Steel Type 316
Valve Disc Center positioned for higher flowcapability. Cast Ductile IronASTM A536 with stainless steeltype 316 edges for strengthlonger life. Rounded machinededge for lower torque. 3” and 4”sizes, all cast ASTM A351 type316 stainless steel.
FEATURES:Sizes 3”, 4”, 6”, 8”, 10”, 12”, 14”, 16”, 18”, 20”, 24”Flanged body styleDuctile Iron Body and DiscBonded seat in bodySymmetrical lens shaped discNylatron GSM nonmetallic self lubricating bearingsV-type packingFusion epoxy paint
Model 45 Model 45
VALVE SIZE
PART NUMBER
A B C D E F G H J K L M N P Q R S TWEIGHT (LBS.)
3" 450100060 5.16 3.74 5.00 3.10 7.50 6.00 (4) 3/4" .94 15.00 7.88 6.13 1.75 5.75 .50 .13 1.20 .39 2.76 43
4" 450100070 5.91 4.49 5.00 4.09 9.00 7.50 (8) 3/4" .94 14.61 8.90 6.85 1.77 5.75 .63 .13 1.13 .39 2.76 54
6" 450000090 7.09 5.47 5.00 6.14 11.00 9.50 (8) 7/8" 1.00 17.09 8.90 6.85 1.77 5.75 1.00 .24 1.23 .39 2.76 74
8" 450000100 8.27 6.89 6.00 8.00 13.50 11.75 (8) 7/8" 1.13 22.56 12.32 9.33 2.48 11.31 1.13 .32 2.00 .46 4.02 134
10" 450000110 9.69 8.00 8.00 9.88 16.00 14.25 (12) 1" 1.18 25.24 12.32 9.33 2.48 11.31 1.38 .39 2.00 .46 4.02 188
12" 450000120 10.87 9.53 8.00 11.89 19.00 17.00 (12) 1" 1.25 27.36 12.09 8.86 3.15 11.31 1.50 .39 2.09 .55 4.92 261
14" 450000140 12.91 10.08 8.00 14.00 20.98 18.74 (12) 1-1/8" 1.38 30.59 12.09 8.86 3.15 11.31 1.50 .39 2.09 .55 4.92 380
16" 450000160 14.76 11.81 8.00 16.00 23.50 21.24 (16) 1-1/8" 1.44 37.01 16.61 11.50 4.72 15.50 2.00 .63 3.00 .70 5.51 414
18" 450000180 15.94 12.60 8.00 18.00 25.00 22.76 (16) 1-1/4" 1.56 38.98 16.61 11.50 4.72 15.50 2.00 .63 3.00 .70 5.51 532
20" 450000200 17.64 13.98 8.00 20.00 27.52 25.00 (20) 1-1/4" 1.69 40.31 18.82 13.44 4.78 15.50 2.13 .63 3.64 .87 6.50 653
24" 450000240 20.39 17.52 8.00 24.00 32.01 29.51 (20) 1-3/8" 1.88 46.61 18.82 13.44 4.78 15.50 2.25 .72 4.50 .87 6.50 739
27595 Azure_AZURE Lit. 7.18.06 3/27/14 8:37 AM Page 2
Butterfly Valve
Flanged Butterfly ValvesMunicipal Water & Waste Water
Model 45
AWWA C504
Size 3” - 24” - Class 150B
Flomatic Corporation 15 Pruyn’s Island Drive
Glens Falls, NY 12801-4421
Telephone: 1-(800)-833-2040 Direct Telephone: 1-(518)-761-9797
Fax: 1-(800)-314-3155 Direct Fax: 1-(518)-761-9798
www.flomatic.com
High Quality Valves Built to Last...Flomatic Valves
© Copyright 2014 by Flomatic #YAzure Rev. 2/14
The Flomatic Model 45 butterfly valves shall be manufactured in accordance with the latest version of AWWA C504. The butterfly valves shall be a tightclosing, rubber seated design providing bi-directional bubble tightness. Thevalve shall be suitable for throttling service and/or operation after long periodsof inactivity.
GENERAL
The valve bodies shall be constructed of ductile iron ASTM A536,for valve class 150B and 250B pressure ratings. Cast iron bodiesare not acceptable. Flanges shall be in conformance with ANSIStandard B16.1, Class 125 drilling.
BODY
Suggested Specification
The shaft bearings shall be sleeve type constructed of a self lubricating, corrosion-resistant material. The bearings shall bedesigned to support horizontal and/or vertical shaft loading.
BEARINGS
VALVE DISC The valve disc shall be constructed of cast ductile iron ASTM A536with 316 stainless steel edges, with the exception of 3” and 4”sizes, which shall be constructed of cast 316 stainless steel perASTM A351. The valve disc shall be a center positioned, concentricdesign without ribs or obstructions for improved flow and lowhead loss.
The valve shaft shall be a one piece through disc design construct-ed of stainless steel ASTM A276 type 316. The shaft shall be fastened to the disc utilizing taper pins providing leak-proof connection between the shaft and disc.
SHAFT
The valve seat and interior waterway shall be bonded and vulcanized with rubber. The seat shall cover the entire interiorwater way and flange surface.
SEAT
PACKINGThe packing shall be a rubber, V-type designthat is self adjusting and wear compensating.The valve packing arrangement shall allowfor removal of the actuator without failureof the packing seal.
PAINTThe butterfly valves shall be coated with afusion bonded NSF 61 epoxy powder.
TESTINGThe butterfly valves shall be hydrostatic andleak tested in accordance with AWWA C504.
Flomatic ValvesHigh Quality Valves Built to Last...
Specifications
High Quality Valves Built to Last…
27595 Azure_AZURE Lit. 7.18.06 3/27/14 8:37 AM Page 1