+ FloBoss S600+ – IPL600
IPL600 – Config Transfer
Used to transfer configurations and Firmware
– Configuration Files:
– C:\Program Files\Config600 3.0\Configs
– Firmware:
– C:\Program Files\Config600 3.0\Binary
– NOT the Firmware folder!
Port mode
IPL600 – Config Transfer (Transfer Tab)
S600+ Modbus Serial Port Address Settings
Scan
ports for
S600+’s
Required PC
communication Communication
(Serial/Ethernet)
IPL600 – Config Transfer (Transfer Tab)
Enter S600+ Modbus address
Select the relevant communications port
– Serial
• Confirm port settings
– Default settings are shown – Do not alter
– Network
• Enter S600+ IP Address
IPL600 – Config Transfer (Configuration)
If not at Cold Start menu, perform a cold start
Select required configuration
Select required slot in S600
Click Send
IPL600 – Config Transfer (binary.app)
Must be in Reflash Firmware mode
– Return to Cold Start Menu
• Bit P2 on P152
• Via 5 ‘System Settings’
6 ‘System Status’
• During a cold start, S600 copies the configuration file from Flash memory and replaces any on-line changes, you have the option of keeping or resetting the cumulative totals
• Warm start does not affect the configuration memory (SRAM)
• Click Send
IPL600 – Config Transfer (Receive)
Select whether to overwrite or create new
– If new – enter name
Click Receive now
– Initiate Back-up
– NO