System Overview Apex ™ SeaCam ® 1 HD Zoom SeaCam ® HD Mul� SeaCam ® Connector Op�ons: SEACON MCBH8M-NET SubConn DBH8M-NET SubConn DLPBH Teledyne Impulse MHDG NetG AK Industries LP Ethernet UTP Cable Interconnect Cable Qualified Op�ons (Tested to 10 m): Falmat XtremeCAT FMXCAT50000 Falmat XtremeNET FM022208-05 SubConn D-P4TP24#/4C18# 2 RJ-45 Wetside Female Bulkhead Connector FleXlink Media Converter Board (MCB) Apex SeaCam requires two MCBs SFP Module Your Housing A one atm. environment with suitable connec�ons for the FleXlink MCB. FleXlink (MCB) with SFP Installed SFP Available from DSPL 1 atm. rated CWDM, 0-5dBm Tx Power. 1270-1610 nm in 20 nm increments excluding 1390 nm and 1410 nm. SM LC connector. 1 atm. rated Coax, HD BNC connector Refer to FleXlink Wiring Schema�c for connector pinouts and specifica�ons. Fiber Op�c for SDI video output Power and comms FleXlink to camera MCB Enclosure Op�ons DSPL Housing 1 The Apex SeaCam uses two 3G-SDI signals to transmit video. This setup requires two FleXlink media converters and corresponding 3G-SDI data channels. 2 Only available with SubConn. MCB Enclosure
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
System OverviewApex™ SeaCam® 1
HD Zoom SeaCam®
HD Mul� SeaCam®
Connector Op�ons:SEACON MCBH8M-NETSubConn DBH8M-NETSubConn DLPBHTeledyne Impulse MHDG NetGAK Industries LP Ethernet
UTP Cable
Interconnect CableQualified Op�ons (Tested to 10 m):
Falmat XtremeCAT FMXCAT50000Falmat XtremeNET FM022208-05SubConn D-P4TP24#/4C18# 2
RJ-45
Wetside Female Bulkhead Connector
FleXlink Media Converter
Board (MCB)Apex SeaCam requires two MCBs
SFP Module
Your HousingA one atm. environment with suitable connec�ons for the FleXlink MCB.
FleXlink (MCB) with SFP Installed
SFP Available from DSPL1 atm. rated CWDM, 0-5dBm Tx Power. 1270-1610 nm in 20 nm increments excluding 1390 nm and 1410 nm.SM LC connector.
1 atm. rated Coax, HD BNC connector
Refer to FleXlink Wiring Schema�c for connector pinouts and specifica�ons.
Fiber Op�c for SDI video output
Power and comms
FleXlinkto camera
MCB Enclosure Op�ons
DSPL Housing
1 The Apex SeaCam uses two 3G-SDI signals to transmit video. This setup requires two FleXlink media converters and corresponding 3G-SDI data channels. 2 Only available with SubConn.
MCB Enclosure
Related Documents
