DRUM HEATERS These units provide uniform low heat for relatively low melting- point solids or increasing the ‘flowability’ of thick viscous fluids such as molasses, grease, oils, facts, adhesives, chemicals, and paints etc., to facilitate easy and economical removal from storage containers. The following pages illustrate the varied range of Hotco drum heaters available, consult with Hotco for selection and application. FLEXIBLE SILICONE RUBBER DRUM HEATERS - Type These drum heaters are constructed from silicone rubber, reinforced with fibreglass sheet and incorporated in an earthed metal screen. They are 100 mm (4”) wide and come complete with 1.2 m (48”) flex. Being a moulded assembly they are liquid resistant and extremely flexible to fit snugly around the drum with a simple spring attachment ensuring good contact. CLAMP-ON METAL BAND - Type and These very portable units are a semi-flexible clamp-on metal band and are applied to the outer diameter of the drum by means of adjustable spring loaded clamps. The units are 127mm (5” wide) and applied heat at the area of contact is 10kW/m 2 (6.6w/in 2) and are controlled by a thermostat ( 0 o to 0 o ) with If extra heat is requried for a faster heating period, installation of a second band on the drum is advisable. BASE DRUM HEATER - Type and HBD2 HOTCO base drum heaters are manufactured with the element cast into a heavy section base plate, resulting in an extremeyly robust and reliable drum heater. Temperature is thermostatically controlled and provision is made for permanent floor fixing. ALL THE ABOVE ARE AVAILABLE EX STOCK TUBULAR Hotco Pty Ltd Hotco - industrial strength heating TM www.hotco.com. DRUM HEATERS 32 CATALOGUE NUMBER WATTAGE VOLTAGE DRUM SIZE DH-55230TS 1000 240 200 L / 44 GAL DH-5230TS 300 240 20 L / 5 GAL CATALOGUE NUMBER WATTAGE VOLTAGE DRUM SIZE DM-44TS 2400 240 200 L / 44 GAL DM-20TS 750 240 20 L / 5 GAL CATALOGUE NUMBER WATTAGE VOLTAGE DRUM SIZE DMB-3158 2400 240 200 L / 44 GAL HBD2 750 240 20 L / 5 GAL
3
Embed
FLEXIBLE SILICONE RUBBER DRUM HEATERS - Type '+ 76 '+ 76hotco.com.au › wp-content › uploads › 9DRUM-HEATERS.pdf · FLEXIBLE SILICONE RUBBER DRUM HEATERS - Type '+ 76 '+ 76 These
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DRUM HEATERS
These units provide uniform low heat for relatively low melting-point solids or increasing the ‘flowability’ of thick viscous fluidssuch as molasses, grease, oils, facts, adhesives, chemicals, andpaints etc., to facilitate easy and economical removal fromstorage containers.
The following pages illustrate the varied range of Hotco drum heatersavailable, consult with Hotco for selection and application.
FLEXIBLE SILICONE RUBBER DRUM HEATERS - Type DH-55230TS, DH-5230TS
These drum heaters are constructed from silicone rubber, reinforced with fibreglass sheet and incorporated in anearthed metal screen. They are 100 mm (4”) wide and come complete with 1.2 m (48”) flex.
Being a moulded assembly they are liquid resistant and extremely flexible to fit snugly around the drum with a simple spring attachment ensuring good contact.
CLAMP-ON METAL BAND - Type DM-44TS and DM-20TS
These very portable units are a semi-flexible clamp-on metal band and are applied to the outer diameter of thedrum by means of adjustable spring loaded clamps.
The units are 127mm (5” wide) and applied heat at the area of contact is 10kW/m2 (6.6w/in2) and are controlledby a thermostat (50o to 320o) with 3 core s/rubber lead and 3 pin plug supplied loose.
If extra heat is requried for a faster heating period, installation of a second band on the drum is advisable.
BASE DRUM HEATER - Type DMB3158 and HBD2
HOTCO base drum heaters are manufactured with the element cast into a heavy section base plate, resulting in an extremeyly robust and reliable drum heater. Temperature is thermostatically controlled and provision is made for permanent floor fixing.
Designed for applications where many drums require heating or storing at a controlled temperature. Constructed usingsteel skinned insulated panels, HOTCOdrum ovens feature a fan forced recirculatedair system, 7 day 24 hour time control andadjustable thermostat.
NOTE
The range of HOTCO standard drum ovens (table below) have a maximum temperature rating of 70oC forcontinuous operation. For higher operational temperatures please consult with HOTCO and discuss your particular requirements.
HOTCO HEATED DRUM RACK
The heated drum rack is designed to facilitate easy loading, transport and dispensing from 200 litre drums.
Used where materials such as grases, fat, resin, waxes andtallow require heat to create a flow.
Controlled with an energy regulator, the heated drum rack is rated 240 volt 2400 watts enabling connection to a 10 amp 24 hour programmable timer if desired.
HOTCO DRUM IMMERSION HEATER
Designed for open top drum applications, the drum immersion heater is fitted with a unique depth regulating device, offering the economy of heating or melting only theportion of the contents required. Used where materials such as grease, fat, waxand tallow require heat to create a flow. This robust heater is rated 240 volt 2400 watt enabling connection to a 10 amp programmable timer if desired. For productsuitability consult with HOTCO.