-
Flexi Multi-radio BTS Commissioning and IntegrationConnect via
LMP on ESMx using Ethernet cableSetup the local IP address on PC
under Internet Protocol (TCP/IP) properties as follow:IP
address:192.168.255.130Subnet Mask:255.255.255.128Default Gateway:
nonePersonal Firewall may need to allow access to local network
e.g. Zone AlarmThe default settings of the BTS are: IP address:
192.168.255.1312G Flexi BTS Site Manager connection TCP Port:
275002G Flexi BTS Site Manager SW download via TCP Port: 27501
-
Local Commissioning Flexi 2G BTS Site Manager (2/2)IP address of
System Module, and Password just keep empty
-
Local CommissioningCommissioning WizardSelect the Commissioning
Wizard menu item or click the Commissioningbutton on the View
Selection Bar.
-
Local CommissioningUndo Commissioning (1/4)to revert the site to
un-commissioned mode and he can also check the option that whether
user wants to erase bypass capacity along with it or no.This button
is disabled in remote connection
-
Local CommissioningUndo Commissioning (2/4)
-
Local CommissioningUndo Commissioning (3/4)Indicate the BTS has
successfully uncommissioned
-
Local Commissioning Commissioning ManuallyIn this example, user
do commissioning manually
-
Local Commissioning Site Specific InformationNavigation tree -
Enables user to navigate any screen, and update/view parameters
corresponding to that screen. Data persistence is maintained across
screen navigations
-
Local Commissioning Hardware ConfigurationIf user has hardware
template file (.epb or SCF file), specify from file can be
selectedIn this example specify manually is selected]
-
Local Commissioning Hardware Configuration Module
Configurationconfigure various radio modules, synchronization
master, and radio masters
-
Local CommissioningHardware Configuration Local Sector
settingconfigure and associate antennas of only one type of RF unit
(RM) to a particular local sector and specify per TRX power
-
Local Commissioning Hardware Configuration Antenna
SettingsSelect the antenna line settings, specify MHA settings,
provide information for feeder voltage, feeder loss, VSWR minor and
major limits for the selected antenna
-
Local Commissioning Hardware Configuration RFM EAC
settingsconfigure the external alarm lines associated with the
individual FRMs
-
Local CommissioningTransmission Parameter
-
Enable satellite
-
Local CommissioningTransmission Parameter Synchronization
(Source)
-
Local Commissioning Transmission Parameter LIF Setting
-
Local Commissioning Transmission Parameter Abis Termination
-
Local Commissioning Transmission Parameter Abis Allocation
-
Local CommissioningCross Connection Q1 Management
-
Local CommissioningSCF preview - SummaryFrom this summary, user
can check whether the commissioing step has been completed. This
can be checked by looking at the indication color of each step,
green means ok, red means not complete
-
Local CommissioningCommissioning completeted
-
Local Commissioning Tracing the traffic during the test callFrom
the toolbar select Test menu select Traffic trace select cell would
be traced --> click Automatic Update (if necessary) For the CS
call, yellow color indicates the RTSL that being occupied
-
Sanjaya kumarIdea cellular Ltd.Mo.98370897