1 FLASHWAVE ® 5320 Ethernet Services Platform shaping tomorrow with you The FLASHWAVE ® 5320 Ethernet Services Platform provides intelligent service demarcation and aggregation for Ethernet business and cloud services, such as hosted voice, videoconferencing, backup/recovery, and hosted applications. The FLASHWAVE 5320 platform delivers Carrier Ethernet connectivity through the access network directly to customer premises. The platform can be deployed in remote locations from wiring closets to road side cabinets, enabling cost- effective extension of Ethernet, IP, and intelligent cloud services to business parks, multitenant buildings, cell towers, and Wi-fi hotspots.
7
Embed
FLASHWAVE 5320 Ethernet Services Platform · Popular planning and deployment services for the FLASHWAVE 5320 platform include: • Custom Cabinet Solutions – Turnkey inside wall-mount
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
FLASHWAVE® 5320Ethernet Services Platform
shaping tomorrow with you
The FLASHWAVE® 5320 Ethernet Services Platform provides intelligent service demarcation and aggregation for Ethernet business and cloud services, such as hosted voice, videoconferencing, backup/recovery, and hosted applications. The FLASHWAVE 5320 platform delivers Carrier Ethernet connectivity through the access network directly to customer premises. The platform can be deployed in remote locations from wiring closets to road side cabinets, enabling cost-effective extension of Ethernet, IP, and intelligent cloud services to business parks, multitenant buildings, cell towers, and Wi-fi hotspots.
2
Designed to support MEF CE standards, the FLASHWAVE 5320 Ethernet Services Platform delivers Ethernet Private Line (EPL), Ethernet Virtual Private Line (EVPL), and Ethernet LAN-based connectivity for high-capacity business and 4G mobile backhaul services. With hardware-based 3.3 ms Continuity Check Messages (CCMs) and G.8032v2 Ethernet Ring Protection Switching (ERPS), the FLASHWAVE 5320 platform delivers sub-50 ms protection switching capabilities. The platform also provides standardized User-Network Interface (UNI), Network-to- Network Interface (NNI), and service and traffic management features. These capabilities allow service definition on a per-port, priority, or VLAN basis. Differentiated service levels can be future-defined using traffic prioritization, policing, shaping, and flow control mechanisms.
Service-Level Provisioning, Monitoring, and ManagementNetwork management is provided through graphical user interfaces based on SNMP, supported by in-band or out-of-band interface options and by NETSMART® 1200, a full-featured network management system. The management view ranges from the individual node to an end-to-end network- and service-centric view.
Dedicated Performance Monitoring HardwareThe FLASHWAVE 5320 platform features dedicated hardware for traffic performance monitoring, enabling the platform to address today’s requirement for hardware-based Y.1731 latency, jitter and frame-loss ratio measurements. Hardware-based MAC address swapping enables station loopbacks to allow centralized test sets for service turn-up and performance verification. Tiered Ethernet services as well as wireless backhaul service-level performance may also be monitored through the Web-based SLA portal.
Key Features • Carrier-class platform
• Fixed form-factor design
• Ideal for deployment in customer premises and aggregation environments
• 24 x SFP and 2 x XFP ports with Carrier Ethernet service scalability from 1 Mbps to 10 Gbps
• Low-latency
• Highly reliable service delivery with G.8032 sub 50ms ring protection
• High-precision SLAs and service performance monitoring and reporting via Y.1731
• Integrated SLA hardware eliminating the need for a standalone NID
• Standards-based Carrier Ethernet services
• Deep fault and performance management with Y.1731, including loopback, link trace, delay, jitter and loss measurement
• Customer SLA portal access
FLASHWAVE® 5320Ethernet Services Platform
Standards-Based Carrier Ethernet Delivery
3
ApplicationsThe FLASHWAVE 5320 Ethernet Services Platform is designed for three key applications:
• Mobile backhaul
• Enterprise service delivery
• Access infrastructure
Mobile BackhaulOptimized for mobile backhaul, the FLASHWAVE 5320 Ethernet Services Platform provides enhanced traffic management features that support consistently optimal performance. It delivers high resiliency and reliability in complex, high-traffic networks during peak-traffic times. It also offers guaranteed minimal bandwidth support, while dynamically allocating individual EVCs to peak rates. Optional sub-50 ms network resiliency, using G.8032, offers selective service protection. This platform is the high-performance cell tower aggregation solution for “five-nines” carrier-class backhauling of 4G LTE services.
Mobile backhaul is experiencing an explosion in traffic bandwidth demand. Wireless operators are moving from leased lines to dark fiber as part of their solution and must leverage wavelengths to secure their investment for future expansion at minimal additional cost. The solution to their backhaul needs includes the FLASHWAVE 5320 system as shown in the diagram below, delivering redundancy at all critical points:
• Even (green)/odd(orange) traffic replication
• Ring-based service aggregation with redundant E-Line EVCs per cell site
• Throughput turn-up testing
• Y.1731 performance monitoring
• End-to-end service protection
FLASHWAVE® 5320Ethernet Services Platform
Key Applications
FLASHWAVE5310
FLASHWAVE5310
FLASHWAVE5310
FLASHWAVE5310
FLASHWAVE5310
FLASHWAVE5310
FLASHWAVE5310
NESMART1200
FLASHWAVE5310
FLASHWAVE5320
FLASHWAVE5320
FLASHWAVE7120
FLASHWAVE7120
FLASHWAVE7120
FLASHWAVE7120
FLASHWAVE7120
GEG.8032v2
10GEG.8032v2
G.8032v2
WDMor
10GE
FLASHWAVE 71207U Shelf
with Layer 2
MSC
Odd
Even
An ideal solution for 4G mobile backhaul
4
Enterprise Service DeliveryThe FLASHWAVE 5320 system is the ideal aggregation solution for delivering Ethernet business services. High-density Ethernet service interfaces allow large numbers of data customers to be supported on a single system. Integrated traffic management, data aggregation, and E-Line and E-LAN technologies provide robust, carrier-grade data services with guaranteed SLAs.
Some businesses require relatively small flows (10 to 100 Mbps), which can use a switched Ethernet access network for economical transport. Other businesses, however, require the entire 1 GbE and need it completely intact including the framing bits (transparent). Both customer types can use the FLASHWAVE 5320 platform for further aggregation before handing off higher end interfaces.
FLASHWAVE® 5320Ethernet Services Platform
Key Applications
FLASHWAVE5310
FLASHWAVE5310
FLASHWAVE5310
FLASHWAVE5310
FLASHWAVE5310
FLASHWAVE5310
NESMART1200
FLASHWAVE5310
FLASHWAVE5320
FLASHWAVE5320
FLASHWAVE7120
FLASHWAVE7120
FLASHWAVE7120
FLASHWAVE7120
FLASHWAVE7120
GEG.8032v2
10GEG.8032v2
G.8032v2
WDMor
10GE
FLASHWAVE 71207U Shelf
with Layer 2
Layer 3Services
10GE
Enterprise Ethernet Services Delivery
5
Fujitsu offers a broad selection of professional services for every stage in a network’s evolution and operation. From planning through deployment and ongoing maintenance to future enhancements, Fujitsu Network Services are available whenever needed. Fujitsu sales representatives can guide service providers in selecting options that address individual business needs.
Popular planning and deployment services for the FLASHWAVE 5320 platform include:
• Custom Cabinet Solutions – Turnkey inside wall-mount and outside-plant solutions, including standard and custom configurations for wireline, wireless, FTTx, cable and MSO customers
• Furnish Material – Identification and ordering of the material needed to install network equipment such as electrical and fiber cable solutions, minor materials and third-party ancillary equipment
• Turn-Up and Test – From on-site configuration and simple turn-up to rigorous, long-term testing
Network OperationsNetwork operations are a large part of the expense of a network. The design, implementation, and maintenance of a network all play a part in this operational expense. NETSMART® 1200 is an excellent tool for streamlining the process of deploying and maintaining an Ethernet network. The FLASHWAVE 5320 is fully supported by the NETSMART 1200 system. Of particular interest is that NETSMART 1200 provides for
a Metro Ethernet Forum (MEF) approach to operations. The platform uses MEF terms and concepts for provisioning and allocating resources, which greatly simplifies the operational aspect. The platform also determines flows based on the CIR/CBS/EIR/EBS and reduces complexity and the need to know the complex intricacies of the systems. It makes Ethernet provisioning simple and easy. The NETSMART 1200 system also covers all of the network functions, including WDM and Ethernet.
Maintenance and Support Program For a complete professional maintenance solution, the Fujitsu Maintenance and Support Program has the right combination of flexibility and comprehensive assurance. Choose the level and types of service you need to supplement your own resources. The Maintenance and Support Program helps keep your network running smoothly, provides critical care and protects the longevity of your investment.
Managed Network Solutions With a full range of vendor-independent network fault and performance monitoring features, the Fujitsu Managed Network Solutions offer guaranteed, round-the-clock system protection. Our reliable NOC facility is available as a primary or supplemental operations resource. This service not only helps you control costs and maintain high levels of customer satisfaction, it also provides trustworthy and reliable after-hours and emergency monitoring.
FLASHWAVE® 5320Ethernet Services Platform
Network Services
Control Costs
Choose Your Level of Services
Support WhenYou Need It
Network OperationsCenter On-Site
Configuration
CustomerSatisfaction
Turn-Up & Test
FurnishMaterials
PerformanceMonitoring
6
FLASHWAVE® 5320Ethernet Services Platform
Base System Hardware
Modularity • Hot-swappable AC and DC • Hot-swappable fan unit• Hot swappable air filter
Size 2RU (H x W x D) 3.5 x 17.3 x 10.2” (88 x 440 x 260 mm)
Weight (base unit) 17.1 lbs. (8.1 kg)
Ethernet Ports • 24 x FE/GE SFP ports• 2 x 10 GbE XFP ports
Console Ports • RJ-45 serial port• Local craft access
Out-of-Band Management 10/100 Mbps Ethernet RJ-45
Ethernet Switching
Switching Fabric 64 Gbps
Packets per Second 96 Mpps
MAC Address Table • 32 K table entries• Enable/disable learning per port