Quick Installation Guide EXMS590T VM Audio Tech Support US / Canada phone: (855) audio-99 / (855) 283-4699 email: [email protected] Use the supplied cables to connect to audio source (refer to Setup Section). • Turn on the Speaker System. • Set the Volume for each Speaker to the zero position to start. • Turn on Audio Source and launch media. • Select USB / SD / AUX /DVD Input Source from Remote Control or Subwoofer Front Panel. • Adjust each Speaker Volume as needed. EXCLUSIVE FEATURES USB and SD Card The Multimedia System will accept USB or SD data drives that contain MP3 music files. Music playback order can be adjusted from the Remote Control. Pro-Logic Surround The Multimedia System is equipped with a Pro-Logic surround mode that provides 5.1 channels of sound with conventional Left and Right Stereo Sources. • Select PRO mode for Movie Surround Soundtrack • Disable PRO mode for Music or Game 2-Channel Sound. | 7 | 8 | 9 Rev. 1 EXMS590T © VM Audio All rights reserved. All trade names are registered trademarks of respective manufacturers listed. POWER SOURCE MODEL: EXMS590T AC:120V 60HZ 350mA CAUTION ON OFF AC IN POWER SWITCH AUX AUDIO INPUT DVDAUDIO OUTPUT L FL FR CEN SW SL SR R FL CEN SL FR SR AUDIO OUTPUT DVD AUDIO OUTPUT FL CEN SL FR SW SR | 10 System is not powering on? • Switch Power Button on and verify if the LED Indicator is Illuminated. • Confirm that the AC plug is plugged in and that there is power to that outlet. Speaker(s) does not produce sound? • Verify the system is getting power and check above steps. • Make sure the volume is turned up to an audible listening level and/or your Audio Source is not in a mute status. • Verify that all cables are plugged into the correct jacks. • Try connecting your system to another audio source or device. If the system works correctly with the other device, then your first device is most likely the cause of the problem. Sound is distorted or is not clear? • Low quality compressed music files will increase the distortion and noise that are easily noticed with amplified speakers. Recheck sound quality with a non-compressed music file. • Check the audio source level and decrease if necessary. You should never have your source volume above 90% volume level to minimize distortion. 6. Troubleshooting Caution & Warning CAUTION RISK OF ELECTIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Keep the bass module free from moisture, water, and dust. • Do not let foreign objects into the port opening of the subwoofer. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Unplug the power cord when not using the unit for long period of time. • Do not let flammable sprays come in contact with the unit. • Never disassemble or modify the unit in any way. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE 5. Operation Setup (option 2) 1. Use the Stereo RCA Cables (included) to plug into your DVD or Surround Processor Outputs. 2. Plug the other end of the cable into the Input Section of the Subwoofer. DVD / Surround Processor